]>
Commit | Line | Data |
---|---|---|
e118b27e | 1 | /************************************************************************** |
2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * | |
3 | * * | |
4 | * Author: The ALICE Off-line Project. * | |
5 | * Contributors are mentioned in the code where appropriate. * | |
6 | * * | |
7 | * Permission to use, copy, modify and distribute this software and its * | |
8 | * documentation strictly for non-commercial purposes is hereby granted * | |
9 | * without fee, provided that the above copyright notice appears in all * | |
10 | * copies and that both the copyright notice and this permission notice * | |
11 | * appear in the supporting documentation. The authors make no claims * | |
12 | * about the suitability of this software for any purpose. It is * | |
13 | * provided "as is" without express or implied warranty. * | |
14 | **************************************************************************/ | |
15 | ||
d1cd2474 | 16 | // $Id$ |
17 | // | |
18 | // Class AliMUONSlatGeometryBuilder | |
19 | // ------------------------------- | |
20 | // Abstract base class for geometry construction per chamber. | |
21 | // | |
f4a7360f | 22 | |
2057e0cc | 23 | |
24 | ||
c10e6eaf | 25 | // This Builder is designed according to the enveloppe methode. The basic idea is to be able to allow moves |
26 | // of the slats on the support panels. | |
27 | // Those moves can be described with a simple set of parameters. The next step should be now to describe all | |
28 | // the slats and their places by a unique | |
29 | // class, which would make the SlatBuilder far more compact since now only three parameters can define a slat | |
30 | // and its position, like: | |
2057e0cc | 31 | // * Bool_t rounded_shape_slat |
32 | // * Float_t slat_length | |
33 | // * Float_t slat_number or Float_t slat_position | |
34 | ||
d1cd2474 | 35 | #include <TVirtualMC.h> |
d1cd2474 | 36 | #include <TGeoMatrix.h> |
30178c30 | 37 | #include <Riostream.h> |
d1cd2474 | 38 | |
e118b27e | 39 | #include "AliRun.h" |
40 | #include "AliLog.h" | |
41 | ||
d1cd2474 | 42 | #include "AliMUONSlatGeometryBuilder.h" |
43 | #include "AliMUON.h" | |
b7ef3c96 | 44 | #include "AliMUONConstants.h" |
e118b27e | 45 | #include "AliMUONGeometryModule.h" |
a432117a | 46 | #include "AliMUONGeometryEnvelopeStore.h" |
e516b01d | 47 | #include "AliMUONConstants.h" |
d1cd2474 | 48 | |
49 | ClassImp(AliMUONSlatGeometryBuilder) | |
50 | ||
d1cd2474 | 51 | |
52 | //______________________________________________________________________________ | |
53 | AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder(AliMUON* muon) | |
b7ef3c96 | 54 | : AliMUONVGeometryBuilder(4, 5, 6, 7, 8, 9), |
d1cd2474 | 55 | fMUON(muon) |
56 | { | |
57 | // Standard constructor | |
58 | ||
59 | } | |
60 | ||
61 | //______________________________________________________________________________ | |
62 | AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder() | |
63 | : AliMUONVGeometryBuilder(), | |
64 | fMUON(0) | |
65 | { | |
66 | // Default constructor | |
67 | } | |
68 | ||
69 | ||
70 | //______________________________________________________________________________ | |
71 | AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder(const AliMUONSlatGeometryBuilder& rhs) | |
72 | : AliMUONVGeometryBuilder(rhs) | |
73 | { | |
8c343c7c | 74 | AliFatal("Copy constructor is not implemented."); |
d1cd2474 | 75 | } |
76 | ||
77 | //______________________________________________________________________________ | |
78 | AliMUONSlatGeometryBuilder::~AliMUONSlatGeometryBuilder() { | |
79 | // | |
80 | } | |
81 | ||
82 | //______________________________________________________________________________ | |
83 | AliMUONSlatGeometryBuilder& | |
84 | AliMUONSlatGeometryBuilder::operator = (const AliMUONSlatGeometryBuilder& rhs) | |
85 | { | |
86 | // check assignement to self | |
87 | if (this == &rhs) return *this; | |
88 | ||
8c343c7c | 89 | AliFatal("Assignment operator is not implemented."); |
d1cd2474 | 90 | |
91 | return *this; | |
92 | } | |
93 | ||
94 | // | |
95 | // public methods | |
96 | // | |
97 | ||
98 | //______________________________________________________________________________ | |
99 | void AliMUONSlatGeometryBuilder::CreateGeometry() | |
100 | { | |
e516b01d | 101 | // CreateGeometry is the method containing all the informations concerning Stations 345 geometry. |
102 | // It includes description and placements of support panels and slats. | |
103 | // The code comes directly from what was written in AliMUONv1.cxx before, with modifications concerning | |
104 | // the use of Enveloppe method to place the Geant volumes. | |
105 | // Now, few changes would allow the creation of a Slat methode where slat could be described by few parameters, | |
106 | // and this builder would then be dedicated only to the | |
107 | // placements of the slats. Those modifications could shorten the Station 345 geometry by a non-negligeable factor... | |
d1cd2474 | 108 | |
e516b01d | 109 | Int_t *idtmed = fMUON->GetIdtmed()->GetArray()-1099; |
110 | ||
111 | Float_t angle; | |
112 | Float_t *dum=0; | |
113 | ||
114 | // define the id of tracking media: | |
115 | Int_t idAir = idtmed[1100]; // medium 1 | |
116 | Int_t idGas = idtmed[1108]; // medium 9 = Ar-CO2 gas (80%+20%) | |
117 | Int_t idCopper = idtmed[1110]; | |
118 | Int_t idG10 = idtmed[1111]; | |
119 | Int_t idCarbon = idtmed[1112]; | |
120 | Int_t idRoha = idtmed[1113]; | |
121 | Int_t idNomex = idtmed[1114]; // honey comb | |
122 | Int_t idNoryl = idtmed[1115]; | |
123 | Int_t idNomexB = idtmed[1116]; // bulk material | |
124 | ||
125 | // sensitive area: 40*40 cm**2 | |
126 | const Float_t kSensLength = 40.; | |
127 | const Float_t kSensHeight = 40.; | |
1c334adf | 128 | const Float_t kSensWidth = AliMUONConstants::Pitch()*2;// 0.5 cm, according to TDR fig 2.120 |
e516b01d | 129 | const Int_t kSensMaterial = idGas; |
130 | // const Float_t kYoverlap = 1.5; | |
131 | ||
132 | // PCB dimensions in cm; width: 30 mum copper | |
133 | const Float_t kPcbLength = kSensLength; | |
134 | const Float_t kPcbHeight = 58.; // updated Ch. Finck | |
135 | const Float_t kPcbWidth = 0.003; | |
136 | const Int_t kPcbMaterial = idCopper; | |
137 | ||
138 | // Insulating material: 220 mum G10 fiber glued to pcb | |
139 | const Float_t kInsuLength = kPcbLength; | |
140 | const Float_t kInsuHeight = kPcbHeight; | |
141 | const Float_t kInsuWidth = 0.022; // updated Ch. Finck | |
142 | const Int_t kInsuMaterial = idG10; | |
143 | ||
144 | // Carbon fiber panels: 200mum carbon/epoxy skin | |
145 | const Float_t kCarbonWidth = 0.020; | |
146 | const Int_t kCarbonMaterial = idCarbon; | |
147 | ||
148 | // Nomex (honey comb) between the two panel carbon skins | |
149 | const Float_t kNomexLength = kSensLength; | |
150 | const Float_t kNomexHeight = kSensHeight; | |
151 | const Float_t kNomexWidth = 0.8; // updated Ch. Finck | |
152 | const Int_t kNomexMaterial = idNomex; | |
153 | ||
154 | // Bulk Nomex under panel sandwich Ch. Finck | |
155 | const Float_t kNomexBWidth = 0.025; | |
156 | const Int_t kNomexBMaterial = idNomexB; | |
157 | ||
158 | // Panel sandwich 0.02 carbon*2 + 0.8 nomex | |
159 | const Float_t kPanelLength = kSensLength; | |
160 | const Float_t kPanelHeight = kSensHeight; | |
161 | const Float_t kPanelWidth = 2 * kCarbonWidth + kNomexWidth; | |
162 | ||
f4a7360f | 163 | // Frame along the rounded (spacers) slats |
164 | const Float_t kRframeHeight = 2.00; | |
165 | ||
e516b01d | 166 | // spacer around the slat: 2 sticks along length,2 along height |
167 | // H: the horizontal ones | |
168 | const Float_t kHframeLength = kPcbLength; | |
169 | const Float_t kHframeHeight = 1.95; // updated Ch. Finck | |
170 | const Float_t kHframeWidth = kSensWidth; | |
171 | const Int_t kHframeMaterial = idNoryl; | |
172 | ||
173 | // V: the vertical ones; vertical spacers | |
174 | const Float_t kVframeLength = 2.5; | |
175 | const Float_t kVframeHeight = kSensHeight + kHframeHeight; | |
176 | const Float_t kVframeWidth = kSensWidth; | |
177 | const Int_t kVframeMaterial = idNoryl; | |
178 | ||
179 | // B: the horizontal border filled with rohacell: ok Ch. Finck | |
180 | const Float_t kBframeLength = kHframeLength; | |
181 | const Float_t kBframeHeight = (kPcbHeight - kSensHeight)/2. - kHframeHeight; | |
182 | const Float_t kBframeWidth = kHframeWidth; | |
183 | const Int_t kBframeMaterial = idRoha; | |
184 | ||
185 | // NULOC: 30 mum copper + 200 mum vetronite (same radiation length as 14mum copper) for electronics | |
186 | const Float_t kNulocLength = 2.5; | |
187 | const Float_t kNulocHeight = kBframeHeight; | |
188 | const Float_t kNulocWidth = 0.0030 + 0.0014; // equivalent copper width of vetronite; | |
189 | const Int_t kNulocMaterial = idCopper; | |
190 | ||
191 | // Slat parameters | |
192 | const Float_t kSlatHeight = kPcbHeight; | |
193 | const Float_t kSlatWidth = kSensWidth + 2.*(kPcbWidth + kInsuWidth + kPanelWidth | |
194 | + kNomexBWidth); //replaced rohacell with Nomex Ch. Finck | |
eb1c3e3a | 195 | // const Int_t kSlatMaterial = idAir; |
e516b01d | 196 | const Float_t kDslatLength = -1.25; // position of the slat respect to the beam plane (half vertical spacer) Ch. Finck |
197 | Float_t zSlat = AliMUONConstants::DzSlat();// implemented Ch. Finck | |
198 | Float_t dzCh = AliMUONConstants::DzCh(); | |
199 | ||
200 | Float_t spar[3]; | |
201 | Int_t i, j; | |
202 | Int_t detElemId; | |
203 | ||
204 | // the panel volume contains the nomex | |
205 | Float_t panelpar[3] = { kPanelLength/2., kPanelHeight/2., kPanelWidth/2. }; | |
206 | Float_t nomexpar[3] = { kNomexLength/2., kNomexHeight/2., kNomexWidth/2. }; | |
207 | Float_t twidth = kPanelWidth + kNomexBWidth; | |
208 | Float_t nomexbpar[3] = {kNomexLength/2., kNomexHeight/2.,twidth/2. };// bulk nomex | |
209 | ||
210 | // insulating material contains PCB-> gas | |
211 | twidth = 2*(kInsuWidth + kPcbWidth) + kSensWidth ; | |
212 | Float_t insupar[3] = {kInsuLength/2., kInsuHeight/2., twidth/2. }; | |
213 | twidth -= 2 * kInsuWidth; | |
214 | Float_t pcbpar[3] = {kPcbLength/2., kPcbHeight/2., twidth/2. }; | |
215 | Float_t senspar[3] = {kSensLength/2., kSensHeight/2., kSensWidth/2. }; | |
216 | Float_t theight = 2 * kHframeHeight + kSensHeight; | |
217 | Float_t hFramepar[3] = {kHframeLength/2., theight/2., kHframeWidth/2.}; | |
218 | Float_t bFramepar[3] = {kBframeLength/2., kBframeHeight/2., kBframeWidth/2.}; | |
219 | Float_t vFramepar[3] = {kVframeLength/2., kVframeHeight/2., kVframeWidth/2.}; | |
220 | Float_t nulocpar[3] = {kNulocLength/2., kNulocHeight/2., kNulocWidth/2.}; | |
221 | ||
222 | Float_t xx; | |
223 | Float_t xxmax = (kBframeLength - kNulocLength)/2.; | |
224 | Int_t index=0; | |
d1cd2474 | 225 | |
e516b01d | 226 | AliMUONChamber *iChamber, *iChamber1, *iChamber2; |
d12a7158 | 227 | |
e516b01d | 228 | Int_t* fStations = new Int_t[5]; |
229 | for (Int_t i=0; i<5; i++) fStations[i] = 1; | |
230 | fStations[2] = 1; | |
231 | ||
232 | if (fStations[2]) | |
d1cd2474 | 233 | { |
e516b01d | 234 | //******************************************************************** |
e118b27e | 235 | // Station 3 ** |
236 | //******************************************************************** | |
237 | // indices 1 and 2 for first and second chambers in the station | |
238 | // iChamber (first chamber) kept for other quanties than Z, | |
239 | // assumed to be the same in both chambers | |
e516b01d | 240 | |
e118b27e | 241 | iChamber = &fMUON->Chamber(4); |
e516b01d | 242 | iChamber1 = iChamber; |
e118b27e | 243 | iChamber2 = &fMUON->Chamber(5); |
d1cd2474 | 244 | |
b7ef3c96 | 245 | //GetGeometry(4)->SetDebug(kTRUE); |
246 | //GetGeometry(5)->SetDebug(kTRUE); | |
e118b27e | 247 | |
6ffd4cb7 | 248 | if (!gAlice->GetModule("DIPO")) { |
249 | // Mother volume for each chamber in st3 are only defined if Dipole volue is there. | |
250 | // Outer excess and inner recess for mother volume radius | |
251 | // with respect to ROuter and RInner | |
f29ba3e1 | 252 | Float_t dframepIn = kRframeHeight; |
253 | Float_t dframepOut= kVframeLength + 37.0; // Additional 37 cm gap is needed to wrap the corners of the slats | |
6ffd4cb7 | 254 | Float_t tpar[3]; |
b7ef3c96 | 255 | Double_t dstation = ( (-AliMUONConstants::DefaultChamberZ(5)) - |
256 | (-AliMUONConstants::DefaultChamberZ(4)) ) /2.1; | |
257 | tpar[0] = AliMUONConstants::Rmin(2)-dframepIn; | |
258 | tpar[1] = AliMUONConstants::Rmax(2)+dframepOut; | |
6ffd4cb7 | 259 | tpar[2] = dstation; |
260 | gMC->Gsvolu("CH05", "TUBE", idAir, tpar, 3); | |
261 | gMC->Gsvolu("CH06", "TUBE", idAir, tpar, 3); | |
6ffd4cb7 | 262 | } |
e516b01d | 263 | // volumes for slat geometry (xx=5,..,10 chamber id): |
264 | // Sxx0 Sxx1 Sxx2 Sxx3 --> Slat Mother volumes | |
265 | // SxxG --> Sensitive volume (gas) | |
266 | // SxxP --> PCB (copper) | |
267 | // SxxI --> Insulator (G10) | |
268 | // SxxC --> Carbon panel | |
269 | // SxxN --> Nomex comb | |
270 | // SxxX --> Nomex bulk | |
271 | // SxxH, SxxV --> Horizontal and Vertical frames (Noryl) | |
272 | // SB5x --> Volumes for the 35 cm long PCB | |
273 | // slat dimensions: slat is a MOTHER volume!!! made of air | |
274 | ||
275 | // only for chamber 5: slat 1 has a PCB shorter by 5cm! | |
276 | ||
277 | Float_t tlength = 35.; | |
278 | Float_t panelpar2[3] = { tlength/2., panelpar[1], panelpar[2]}; | |
279 | Float_t nomexpar2[3] = { tlength/2., nomexpar[1], nomexpar[2]}; | |
280 | Float_t nomexbpar2[3] = { tlength/2., nomexbpar[1], nomexbpar[2]}; | |
281 | Float_t insupar2[3] = { tlength/2., insupar[1], insupar[2]}; | |
282 | Float_t pcbpar2[3] = { tlength/2., pcbpar[1], pcbpar[2]}; | |
283 | Float_t senspar2[3] = { tlength/2., senspar[1], senspar[2]}; | |
284 | Float_t hFramepar2[3] = { tlength/2., hFramepar[1], hFramepar[2]}; | |
285 | Float_t bFramepar2[3] = { tlength/2., bFramepar[1], bFramepar[2]}; | |
286 | Float_t *dum=0; | |
287 | Float_t pcbDLength3 = (kPcbLength - tlength); | |
288 | ||
289 | const Int_t kNslats3 = 5; // number of slats per quadrant | |
290 | const Int_t kNPCB3[kNslats3] = {4, 4, 4, 3, 2}; // n PCB per slat | |
291 | const Float_t kXpos3[kNslats3] = {0., 0., 0., 0., 0.};//{31., 0., 0., 0., 0.}; | |
292 | const Float_t kYpos3[kNslats3] = {0, 37.8, 37.7, 37.3, 33.7}; | |
293 | Float_t slatLength3[kNslats3]; | |
294 | ||
295 | // create and position the slat (mother) volumes | |
296 | ||
297 | char idSlatCh5[5]; | |
298 | char idSlatCh6[5]; | |
299 | Float_t xSlat3; | |
300 | Float_t ySlat3 = 0; | |
301 | Float_t angle = 0.; | |
302 | Float_t spar2[3]; | |
303 | for (i = 0; i < kNslats3; i++){ | |
304 | ||
305 | slatLength3[i] = kPcbLength * kNPCB3[i] + 2.* kVframeLength; | |
306 | xSlat3 = slatLength3[i]/2. + kDslatLength + kXpos3[i]; | |
307 | ySlat3 += kYpos3[i]; | |
308 | ||
309 | spar[0] = slatLength3[i]/2.; | |
310 | spar[1] = kSlatHeight/2.; | |
311 | spar[2] = kSlatWidth/2.; | |
312 | // take away 5 cm from the first slat in chamber 5 | |
7ddb761c | 313 | if (i == 0 || i == 1 || i == 2) { // 1 pcb is shortened by 5cm |
e516b01d | 314 | spar2[0] = spar[0] - pcbDLength3/2.; |
315 | } else { | |
316 | spar2[0] = spar[0]; | |
317 | } | |
318 | spar2[1] = spar[1]; | |
319 | spar2[2] = spar[2]; | |
320 | Float_t dzCh3 = dzCh; | |
321 | Float_t zSlat3 = (i%2 ==0)? -zSlat : zSlat; // seems not that zSlat3 = zSlat4 & 5 refering to plan PQ7EN345-6 ? | |
322 | ||
e856ab99 | 323 | sprintf(idSlatCh5,"LA%d",i+kNslats3-1); |
eb1c3e3a | 324 | //gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3); |
e856ab99 | 325 | detElemId = 509 - (i + kNslats3-1-4); |
e516b01d | 326 | GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3), |
327 | TGeoRotation("rot1",90,angle,90,90+angle,0,0) ); | |
328 | ||
329 | sprintf(idSlatCh5,"LA%d",3*kNslats3-2+i); | |
eb1c3e3a | 330 | //gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3); |
e856ab99 | 331 | detElemId = 500 + (i + kNslats3-1-4); |
e516b01d | 332 | GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3), |
333 | TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) ); | |
334 | ||
335 | if (i > 0) { | |
336 | sprintf(idSlatCh5,"LA%d",kNslats3-1-i); | |
eb1c3e3a | 337 | // gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3); |
e856ab99 | 338 | detElemId = 509 + (i + kNslats3-1-4); |
e516b01d | 339 | GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3), |
340 | TGeoRotation("rot3",90,angle,90,270+angle,180,0) ); | |
341 | ||
342 | sprintf(idSlatCh5,"LA%d",3*kNslats3-2-i); | |
eb1c3e3a | 343 | // gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3); |
e856ab99 | 344 | detElemId = 518 - (i + kNslats3-1-4); |
e516b01d | 345 | GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3), |
346 | TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) ); | |
347 | } | |
348 | ||
349 | sprintf(idSlatCh6,"LB%d",kNslats3-1+i); | |
eb1c3e3a | 350 | // gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar,3); |
e856ab99 | 351 | detElemId = 609 - (i + kNslats3-1-4); |
e516b01d | 352 | GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3), |
353 | TGeoRotation("rot5",90,angle,90,90+angle,0,0) ); | |
354 | sprintf(idSlatCh6,"LB%d",3*kNslats3-2+i); | |
eb1c3e3a | 355 | // gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar,3); |
e856ab99 | 356 | detElemId = 600 + (i + kNslats3-1-4); |
e516b01d | 357 | GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3), |
358 | TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) ); | |
359 | ||
360 | if (i > 0) { | |
361 | sprintf(idSlatCh6,"LB%d",kNslats3-1-i); | |
eb1c3e3a | 362 | //gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar,3); |
e856ab99 | 363 | detElemId = 609 + (i + kNslats3-1-4); |
e516b01d | 364 | GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3), |
365 | TGeoRotation("rot7",90,angle,90,270+angle,180,0) ); | |
366 | ||
367 | sprintf(idSlatCh6,"LB%d",3*kNslats3-2-i); | |
eb1c3e3a | 368 | //gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar,3); |
e856ab99 | 369 | detElemId = 618 - (i + kNslats3-1-4); |
e516b01d | 370 | GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3), |
371 | TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) ); | |
372 | } | |
373 | } | |
d1cd2474 | 374 | |
e516b01d | 375 | // create the panel volume |
d1cd2474 | 376 | |
e516b01d | 377 | gMC->Gsvolu("S05C","BOX",kCarbonMaterial,panelpar,3); |
378 | gMC->Gsvolu("SB5C","BOX",kCarbonMaterial,panelpar2,3); | |
379 | gMC->Gsvolu("S06C","BOX",kCarbonMaterial,panelpar,3); | |
4846c3ab | 380 | |
e516b01d | 381 | // create the nomex volume (honey comb) |
d1cd2474 | 382 | |
e516b01d | 383 | gMC->Gsvolu("S05N","BOX",kNomexMaterial,nomexpar,3); |
384 | gMC->Gsvolu("SB5N","BOX",kNomexMaterial,nomexpar2,3); | |
385 | gMC->Gsvolu("S06N","BOX",kNomexMaterial,nomexpar,3); | |
4846c3ab | 386 | |
e516b01d | 387 | // create the nomex volume (bulk) |
388 | ||
389 | gMC->Gsvolu("S05X","BOX",kNomexBMaterial,nomexbpar,3); | |
390 | gMC->Gsvolu("SB5X","BOX",kNomexBMaterial,nomexbpar2,3); | |
391 | gMC->Gsvolu("S06X","BOX",kNomexBMaterial,nomexbpar,3); | |
d1cd2474 | 392 | |
e516b01d | 393 | // create the insulating material volume |
394 | ||
395 | gMC->Gsvolu("S05I","BOX",kInsuMaterial,insupar,3); | |
396 | gMC->Gsvolu("SB5I","BOX",kInsuMaterial,insupar2,3); | |
397 | gMC->Gsvolu("S06I","BOX",kInsuMaterial,insupar,3); | |
4846c3ab | 398 | |
e516b01d | 399 | // create the PCB volume |
d1cd2474 | 400 | |
e516b01d | 401 | gMC->Gsvolu("S05P","BOX",kPcbMaterial,pcbpar,3); |
402 | gMC->Gsvolu("SB5P","BOX",kPcbMaterial,pcbpar2,3); | |
403 | gMC->Gsvolu("S06P","BOX",kPcbMaterial,pcbpar,3); | |
d1cd2474 | 404 | |
e516b01d | 405 | // create the sensitive volumes, |
4846c3ab | 406 | |
e516b01d | 407 | gMC->Gsvolu("S05G","BOX",kSensMaterial,dum,0); |
408 | gMC->Gsvolu("S06G","BOX",kSensMaterial,dum,0); | |
d1cd2474 | 409 | |
e516b01d | 410 | // create the vertical frame volume |
d1cd2474 | 411 | |
e516b01d | 412 | gMC->Gsvolu("S05V","BOX",kVframeMaterial,vFramepar,3); |
413 | gMC->Gsvolu("S06V","BOX",kVframeMaterial,vFramepar,3); | |
d1cd2474 | 414 | |
e516b01d | 415 | // create the horizontal frame volume |
d1cd2474 | 416 | |
e516b01d | 417 | gMC->Gsvolu("S05H","BOX",kHframeMaterial,hFramepar,3); |
418 | gMC->Gsvolu("SB5H","BOX",kHframeMaterial,hFramepar2,3); | |
419 | gMC->Gsvolu("S06H","BOX",kHframeMaterial,hFramepar,3); | |
4846c3ab | 420 | |
e516b01d | 421 | // create the horizontal border volume |
d1cd2474 | 422 | |
e516b01d | 423 | gMC->Gsvolu("S05B","BOX",kBframeMaterial,bFramepar,3); |
424 | gMC->Gsvolu("SB5B","BOX",kBframeMaterial,bFramepar2,3); | |
425 | gMC->Gsvolu("S06B","BOX",kBframeMaterial,bFramepar,3); | |
4846c3ab | 426 | |
e516b01d | 427 | index = 0; |
428 | for (i = 0; i<kNslats3; i++){ | |
429 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { | |
430 | ||
431 | if (i == 0 && quadrant == 2) continue; | |
432 | if (i == 0 && quadrant == 4) continue; | |
433 | ||
434 | sprintf(idSlatCh5,"LA%d",ConvertSlatNum(i,quadrant,kNslats3-1)); | |
435 | sprintf(idSlatCh6,"LB%d",ConvertSlatNum(i,quadrant,kNslats3-1)); | |
436 | Float_t xvFrame = (slatLength3[i] - kVframeLength)/2.; | |
437 | Float_t xvFrame2 = xvFrame; | |
438 | ||
439 | if (i == 0 || i == 1 || i == 2) xvFrame2 -= pcbDLength3/2.; | |
440 | ||
441 | // position the vertical frames | |
442 | if ( i > 2) { | |
443 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, | |
444 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); | |
445 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, | |
446 | (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); | |
447 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, | |
448 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); | |
449 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, | |
450 | (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); | |
451 | } | |
452 | ||
453 | if (i == 2) { | |
454 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, | |
455 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame2,0.,0.)); | |
456 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, | |
457 | (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); | |
458 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, | |
459 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); | |
460 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, | |
461 | (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); | |
462 | } | |
463 | ||
464 | if (i == 0 || i == 1) { // no rounded spacer for the moment (Ch. Finck) | |
465 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, | |
466 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame2,0.,0.)); | |
467 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, | |
468 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); | |
469 | } | |
470 | ||
471 | // position the panels and the insulating material | |
472 | for (j = 0; j < kNPCB3[i]; j++){ | |
473 | if (i == 1 && j == 0) continue; | |
474 | if (i == 0 && j == 0) continue; | |
475 | index++; | |
476 | Float_t xx = kSensLength * (-kNPCB3[i]/2. + j + 0.5); | |
477 | Float_t xx2 = xx - pcbDLength3/2.; | |
d1cd2474 | 478 | |
e516b01d | 479 | Float_t zPanel = spar[2] - nomexbpar[2]; |
480 | ||
481 | if ( (i == 0 || i == 1 || i == 2) && j == kNPCB3[i]-1) { // 1 pcb is shortened by 5cm | |
482 | GetEnvelopes(4)->AddEnvelopeConstituent("SB5X", idSlatCh5, 2*index-1,TGeoTranslation(xx2,0.,zPanel)); | |
483 | GetEnvelopes(4)->AddEnvelopeConstituent("SB5X", idSlatCh5, 2*index,TGeoTranslation(xx2,0.,-zPanel)); | |
484 | GetEnvelopes(4)->AddEnvelopeConstituent("SB5I", idSlatCh5, index,TGeoTranslation(xx2,0.,0.)); | |
485 | } else { | |
486 | GetEnvelopes(4)->AddEnvelopeConstituent("S05X", idSlatCh5, 2*index-1,TGeoTranslation(xx,0.,zPanel)); | |
487 | GetEnvelopes(4)->AddEnvelopeConstituent("S05X", idSlatCh5, 2*index,TGeoTranslation(xx,0.,-zPanel)); | |
488 | GetEnvelopes(4)->AddEnvelopeConstituent("S05I", idSlatCh5, index,TGeoTranslation(xx,0.,0.)); | |
489 | } | |
490 | GetEnvelopes(5)->AddEnvelopeConstituent("S06X", idSlatCh6, 2*index-1,TGeoTranslation(xx,0.,zPanel)); | |
491 | GetEnvelopes(5)->AddEnvelopeConstituent("S06X", idSlatCh6, 2*index,TGeoTranslation(xx,0.,-zPanel)); | |
492 | GetEnvelopes(5)->AddEnvelopeConstituent("S06I", idSlatCh6, index,TGeoTranslation(xx,0.,0.)); | |
d1cd2474 | 493 | |
e516b01d | 494 | } |
495 | } | |
496 | } | |
497 | ||
498 | // position the nomex volume inside the panel volume | |
499 | gMC->Gspos("S05N",1,"S05C",0.,0.,0.,0,"ONLY"); | |
500 | gMC->Gspos("SB5N",1,"SB5C",0.,0.,0.,0,"ONLY"); | |
501 | gMC->Gspos("S06N",1,"S06C",0.,0.,0.,0,"ONLY"); | |
4846c3ab | 502 | |
e516b01d | 503 | // position panel volume inside the bulk nomex material volume |
504 | gMC->Gspos("S05C",1,"S05X",0.,0.,kNomexBWidth/2.,0,"ONLY"); | |
505 | gMC->Gspos("SB5C",1,"SB5X",0.,0.,kNomexBWidth/2.,0,"ONLY"); | |
506 | gMC->Gspos("S06C",1,"S06X",0.,0.,kNomexBWidth/2.,0,"ONLY"); | |
507 | ||
508 | // position the PCB volume inside the insulating material volume | |
509 | gMC->Gspos("S05P",1,"S05I",0.,0.,0.,0,"ONLY"); | |
510 | gMC->Gspos("SB5P",1,"SB5I",0.,0.,0.,0,"ONLY"); | |
511 | gMC->Gspos("S06P",1,"S06I",0.,0.,0.,0,"ONLY"); | |
4846c3ab | 512 | |
e516b01d | 513 | // position the horizontal frame volume inside the PCB volume |
514 | gMC->Gspos("S05H",1,"S05P",0.,0.,0.,0,"ONLY"); | |
515 | gMC->Gspos("SB5H",1,"SB5P",0.,0.,0.,0,"ONLY"); | |
516 | gMC->Gspos("S06H",1,"S06P",0.,0.,0.,0,"ONLY"); | |
4846c3ab | 517 | |
e516b01d | 518 | // position the sensitive volume inside the horizontal frame volume |
519 | gMC->Gsposp("S05G",1,"S05H",0.,0.,0.,0,"ONLY",senspar,3); | |
520 | gMC->Gsposp("S05G",1,"SB5H",0.,0.,0.,0,"ONLY",senspar2,3); | |
521 | gMC->Gsposp("S06G",1,"S06H",0.,0.,0.,0,"ONLY",senspar,3); | |
4846c3ab | 522 | |
523 | ||
e516b01d | 524 | // position the border volumes inside the PCB volume |
525 | Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.; | |
526 | gMC->Gspos("S05B",1,"S05P",0., yborder,0.,0,"ONLY"); | |
527 | gMC->Gspos("S05B",2,"S05P",0.,-yborder,0.,0,"ONLY"); | |
528 | gMC->Gspos("SB5B",1,"SB5P",0., yborder,0.,0,"ONLY"); | |
529 | gMC->Gspos("SB5B",2,"SB5P",0.,-yborder,0.,0,"ONLY"); | |
530 | ||
531 | gMC->Gspos("S06B",1,"S06P",0., yborder,0.,0,"ONLY"); | |
532 | gMC->Gspos("S06B",2,"S06P",0.,-yborder,0.,0,"ONLY"); | |
4846c3ab | 533 | |
e516b01d | 534 | // create the NULOC volume and position it in the horizontal frame |
535 | gMC->Gsvolu("S05E","BOX",kNulocMaterial,nulocpar,3); | |
536 | gMC->Gsvolu("S06E","BOX",kNulocMaterial,nulocpar,3); | |
537 | index = 0; | |
538 | Float_t xxmax2 = xxmax - pcbDLength3/2.; | |
539 | for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) { | |
540 | index++; | |
541 | gMC->Gspos("S05E",2*index-1,"S05B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); | |
542 | gMC->Gspos("S05E",2*index ,"S05B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY"); | |
543 | gMC->Gspos("S06E",2*index-1,"S06B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); | |
544 | gMC->Gspos("S06E",2*index ,"S06B", xx, 0., kBframeWidth/2.- kNulocWidth/2, 0, "ONLY"); | |
545 | if (xx > -xxmax2 && xx< xxmax2) { | |
546 | gMC->Gspos("S05E",2*index-1,"SB5B", xx, 0.,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY"); | |
547 | gMC->Gspos("S05E",2*index ,"SB5B", xx, 0., kBframeWidth/2.- kNulocWidth/2, 0, "ONLY"); | |
548 | } | |
549 | } | |
550 | ||
551 | // position the volumes approximating the circular section of the pipe | |
552 | Float_t epsilon = 0.001; | |
553 | Int_t ndiv = 6; | |
554 | Int_t imax = 1; | |
555 | Double_t divpar[3]; | |
556 | Double_t dydiv = kSensHeight/ndiv; | |
557 | Double_t ydiv = (kSensHeight - dydiv)/2.; | |
b7ef3c96 | 558 | Double_t rmin = AliMUONConstants::Rmin(2);// Same radius for both chamber in St3 |
e516b01d | 559 | Double_t xdiv = 0.; |
560 | Float_t xvol; | |
561 | Float_t yvol; | |
562 | ||
563 | for (Int_t idiv = 0; idiv < ndiv; idiv++){ | |
564 | ydiv += dydiv; | |
565 | xdiv = 0.; | |
6f7aa53f | 566 | if (ydiv < rmin) xdiv = rmin * TMath::Sin( TMath::ACos((ydiv-dydiv/2.)/rmin) ); |
e516b01d | 567 | divpar[0] = (kPcbLength - xdiv)/2.; |
568 | divpar[1] = dydiv/2. - epsilon; | |
569 | divpar[2] = kSensWidth/2.; | |
570 | xvol = (kPcbLength + xdiv)/2.; | |
571 | yvol = ydiv; | |
572 | ||
573 | // Volumes close to the beam pipe for slat i=1 so 4 slats per chamber | |
574 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { | |
575 | sprintf(idSlatCh5,"LA%d",ConvertSlatNum(1,quadrant,kNslats3-1)); | |
576 | sprintf(idSlatCh6,"LB%d",ConvertSlatNum(1,quadrant,kNslats3-1)); | |
577 | ||
578 | GetEnvelopes(4)->AddEnvelopeConstituentParam("S05G", idSlatCh5, quadrant*100+imax+4*idiv+1, | |
579 | TGeoTranslation(xvol-(kPcbLength * kNPCB3[1]/2.),yvol-kPcbLength,0.),3,divpar); | |
580 | ||
581 | GetEnvelopes(5)->AddEnvelopeConstituentParam("S06G", idSlatCh6, quadrant*100+imax+4*idiv+1, | |
582 | TGeoTranslation(xvol-(kPcbLength * kNPCB3[1]/2.),yvol-kPcbLength,0.),3,divpar); | |
583 | } | |
584 | } | |
585 | ||
586 | // Volumes close to the beam pipe for slat i=0 so 2 slats per chamber (central slat for station 3) | |
587 | // Gines Martinez, Subatech sep 04 | |
588 | // 9 box volumes are used to define the PCB closed to the beam pipe of the slat 122000SR1 of chamber 5 and 6 of St3 | |
589 | // Accordingly to plan PQ-LAT-SR1 of CEA-DSM-DAPNIA-SIS/BE ph HARDY 8-Oct-2002 | |
590 | // Rmin = 31.5 cm | |
b7ef3c96 | 591 | rmin = AliMUONConstants::Rmin(2); // Same radius for both chamber in St3 |
e516b01d | 592 | ndiv = 9; |
593 | dydiv = kSensHeight/ndiv; // Vertical size of the box volume approximating the rounded PCB | |
594 | ydiv = -kSensHeight/2 + dydiv/2.; // Initializing vertical position of the volume from bottom | |
595 | xdiv = 0.; // Initializing horizontal position of the box volumes | |
596 | ||
597 | for (Int_t idiv = 0; idiv < ndiv; idiv++){ | |
598 | xdiv = TMath::Abs( rmin * TMath::Sin( TMath::ACos(ydiv/rmin) ) ); | |
599 | divpar[0] = (kPcbLength - xdiv)/2.; // Dimension of the box volume | |
600 | divpar[1] = dydiv/2. - epsilon; | |
601 | divpar[2] = kSensWidth/2.; | |
602 | xvol = (kPcbLength + xdiv)/2.; //2D traslition for positionning of box volume | |
603 | yvol = ydiv; | |
604 | Int_t side; | |
605 | for (side = 1; side <= 2; side++) { | |
606 | sprintf(idSlatCh5,"LA%d",4); | |
607 | sprintf(idSlatCh6,"LB%d",4); | |
608 | if(side == 2) { | |
609 | sprintf(idSlatCh5,"LA%d",13); | |
610 | sprintf(idSlatCh6,"LB%d",13); | |
611 | } | |
612 | GetEnvelopes(4)->AddEnvelopeConstituentParam("S05G", idSlatCh5,500+side*100+imax+4*idiv+1, | |
613 | TGeoTranslation(xvol-(kPcbLength * kNPCB3[0]/2.),yvol,0.),3,divpar); | |
614 | ||
615 | GetEnvelopes(5)->AddEnvelopeConstituentParam("S06G", idSlatCh6,500+side*100+imax+4*idiv+1, | |
616 | TGeoTranslation(xvol-(kPcbLength * kNPCB3[0]/2.),yvol,0.),3,divpar); | |
617 | } | |
618 | ydiv += dydiv; // Going from bottom to top | |
619 | } | |
620 | // cout << "Geometry for Station 3...... done" << endl; | |
d1cd2474 | 621 | } |
622 | ||
e516b01d | 623 | if (fStations[3]) { |
d1cd2474 | 624 | |
625 | ||
e516b01d | 626 | // //******************************************************************** |
627 | // // Station 4 ** | |
628 | // //******************************************************************** | |
629 | // // indices 1 and 2 for first and second chambers in the station | |
630 | // // iChamber (first chamber) kept for other quanties than Z, | |
631 | // // assumed to be the same in both chambers | |
632 | // corrected geometry (JP. Cussonneau, Ch. Finck) | |
d1cd2474 | 633 | |
e118b27e | 634 | iChamber = &fMUON->Chamber(6); |
e516b01d | 635 | iChamber1 = iChamber; |
e118b27e | 636 | iChamber2 = &fMUON->Chamber(7); |
e516b01d | 637 | |
638 | const Int_t kNslats4 = 7; // number of slats per quadrant | |
639 | const Int_t kNPCB4[kNslats4] = {5, 6, 5, 5, 4, 3, 2}; // n PCB per slat | |
640 | const Float_t kXpos4[kNslats4] = {38.2, 0., 0., 0., 0., 0., 0.}; | |
641 | const Float_t kYpos41[kNslats4] = {0., 38.2, 34.40, 36.60, 29.3, 37.0, 28.6}; | |
642 | const Float_t kYpos42[kNslats4] = {0., 38.2, 37.85, 37.55, 29.4, 37.0, 28.6}; | |
643 | ||
644 | Float_t slatLength4[kNslats4]; | |
645 | ||
6ffd4cb7 | 646 | |
647 | // Mother volume for each chamber | |
648 | // Outer excess and inner recess for mother volume radius | |
649 | // with respect to ROuter and RInner | |
f29ba3e1 | 650 | Float_t dframepIn = kRframeHeight; |
651 | Float_t dframepOut= kVframeLength + 40.0; // Additional 30 cm gap is needed to wrap the corners of the slats | |
6ffd4cb7 | 652 | Float_t tpar[3]; |
b7ef3c96 | 653 | Double_t dstation = ( (-AliMUONConstants::DefaultChamberZ(7)) - |
2c9844e7 | 654 | (-AliMUONConstants::DefaultChamberZ(6)) ) /2.2; |
b7ef3c96 | 655 | tpar[0] = AliMUONConstants::Rmin(3)-dframepIn; |
656 | tpar[1] = AliMUONConstants::Rmax(3)+dframepOut; | |
6ffd4cb7 | 657 | tpar[2] = dstation; |
658 | gMC->Gsvolu("CH07", "TUBE", idAir, tpar, 3); | |
659 | gMC->Gsvolu("CH08", "TUBE", idAir, tpar, 3); | |
6ffd4cb7 | 660 | |
e516b01d | 661 | // create and position the slat (mother) volumes |
662 | ||
663 | char idSlatCh7[5]; | |
664 | char idSlatCh8[5]; | |
665 | Float_t xSlat4; | |
666 | Float_t ySlat41 = 0; | |
667 | Float_t ySlat42 = 0; | |
668 | ||
669 | angle = 0.; | |
670 | ||
671 | for (i = 0; i<kNslats4; i++){ | |
672 | slatLength4[i] = kPcbLength * kNPCB4[i] + 2. * kVframeLength; | |
673 | xSlat4 = slatLength4[i]/2. + kDslatLength + kXpos4[i]; | |
674 | ySlat41 += kYpos41[i]; | |
675 | ySlat42 += kYpos42[i]; | |
676 | ||
677 | spar[0] = slatLength4[i]/2.; | |
678 | spar[1] = kSlatHeight/2.; | |
679 | spar[2] = kSlatWidth/2.; | |
680 | Float_t dzCh4 = dzCh; | |
681 | Float_t zSlat4 = (i%2 ==0)? -zSlat : zSlat; | |
682 | ||
683 | sprintf(idSlatCh7,"LC%d",kNslats4-1+i); | |
eb1c3e3a | 684 | //gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3); |
e856ab99 | 685 | detElemId = 713 - (i + kNslats4-1-6); |
e516b01d | 686 | GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, ySlat41, -zSlat4 + dzCh4), |
687 | TGeoRotation("rot1",90,angle,90,90+angle,0,0) ); | |
688 | ||
689 | sprintf(idSlatCh7,"LC%d",3*kNslats4-2+i); | |
eb1c3e3a | 690 | //gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3); |
e856ab99 | 691 | detElemId = 700 + (i + kNslats4-1-6); |
e516b01d | 692 | GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(-xSlat4, ySlat41, zSlat4 - dzCh4), |
693 | TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) ); | |
d1cd2474 | 694 | |
e516b01d | 695 | if (i > 0) { |
696 | sprintf(idSlatCh7,"LC%d",kNslats4-1-i); | |
eb1c3e3a | 697 | //gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3); |
e856ab99 | 698 | detElemId = 713 + (i + kNslats4-1-6); |
e516b01d | 699 | GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, -ySlat41, -zSlat4 + dzCh4), |
700 | TGeoRotation("rot3",90,angle,90,270+angle,180,0) ); | |
701 | ||
702 | sprintf(idSlatCh7,"LC%d",3*kNslats4-2-i); | |
e856ab99 | 703 | detElemId = 726 - (i + kNslats4-1-6); |
eb1c3e3a | 704 | //gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3); |
e516b01d | 705 | GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, |
706 | TGeoTranslation(-xSlat4, -ySlat41, zSlat4 - dzCh4), | |
707 | TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) ); | |
708 | } | |
709 | ||
710 | sprintf(idSlatCh8,"LD%d",kNslats4-1+i); | |
eb1c3e3a | 711 | //gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3); |
e856ab99 | 712 | detElemId = 813 - (i + kNslats4-1-6); |
e516b01d | 713 | GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, ySlat42, -zSlat4 + dzCh4), |
714 | TGeoRotation("rot5",90,angle,90,90+angle,0,0) ); | |
715 | ||
716 | sprintf(idSlatCh8,"LD%d",3*kNslats4-2+i); | |
e856ab99 | 717 | detElemId = 800 + (i + kNslats4-1-6); |
eb1c3e3a | 718 | //gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3); |
e516b01d | 719 | GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, ySlat42, zSlat4 - dzCh4), |
720 | TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) ); | |
721 | if (i > 0) { | |
722 | sprintf(idSlatCh8,"LD%d",kNslats4-1-i); | |
e856ab99 | 723 | detElemId = 813 + (i + kNslats4-1-6); |
eb1c3e3a | 724 | //gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3); |
e516b01d | 725 | GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, -ySlat42, -zSlat4 + dzCh4), |
726 | TGeoRotation("rot7",90,angle,90,270+angle,180,0) ); | |
727 | sprintf(idSlatCh8,"LD%d",3*kNslats4-2-i); | |
e856ab99 | 728 | detElemId = 826 - (i + kNslats4-1-6); |
eb1c3e3a | 729 | //gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3); |
e516b01d | 730 | GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, -ySlat42, zSlat4 - dzCh4), |
731 | TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) ); | |
732 | } | |
733 | } | |
d1cd2474 | 734 | |
e516b01d | 735 | // create the panel volume |
d1cd2474 | 736 | |
e516b01d | 737 | gMC->Gsvolu("S07C","BOX",kCarbonMaterial,panelpar,3); |
738 | gMC->Gsvolu("S08C","BOX",kCarbonMaterial,panelpar,3); | |
d1cd2474 | 739 | |
e516b01d | 740 | // create the nomex volume |
d1cd2474 | 741 | |
e516b01d | 742 | gMC->Gsvolu("S07N","BOX",kNomexMaterial,nomexpar,3); |
743 | gMC->Gsvolu("S08N","BOX",kNomexMaterial,nomexpar,3); | |
d1cd2474 | 744 | |
d1cd2474 | 745 | |
e516b01d | 746 | // create the nomex volume (bulk) |
d1cd2474 | 747 | |
e516b01d | 748 | gMC->Gsvolu("S07X","BOX",kNomexBMaterial,nomexbpar,3); |
749 | gMC->Gsvolu("S08X","BOX",kNomexBMaterial,nomexbpar,3); | |
d1cd2474 | 750 | |
e516b01d | 751 | // create the insulating material volume |
752 | ||
753 | gMC->Gsvolu("S07I","BOX",kInsuMaterial,insupar,3); | |
754 | gMC->Gsvolu("S08I","BOX",kInsuMaterial,insupar,3); | |
755 | ||
756 | // create the PCB volume | |
757 | ||
758 | gMC->Gsvolu("S07P","BOX",kPcbMaterial,pcbpar,3); | |
759 | gMC->Gsvolu("S08P","BOX",kPcbMaterial,pcbpar,3); | |
d1cd2474 | 760 | |
e516b01d | 761 | // create the sensitive volumes, |
762 | ||
763 | gMC->Gsvolu("S07G","BOX",kSensMaterial,dum,0); | |
764 | gMC->Gsvolu("S08G","BOX",kSensMaterial,dum,0); | |
765 | ||
766 | // create the vertical frame volume | |
767 | ||
768 | gMC->Gsvolu("S07V","BOX",kVframeMaterial,vFramepar,3); | |
769 | gMC->Gsvolu("S08V","BOX",kVframeMaterial,vFramepar,3); | |
770 | ||
771 | // create the horizontal frame volume | |
772 | ||
773 | gMC->Gsvolu("S07H","BOX",kHframeMaterial,hFramepar,3); | |
774 | gMC->Gsvolu("S08H","BOX",kHframeMaterial,hFramepar,3); | |
775 | ||
776 | // create the horizontal border volume | |
777 | ||
778 | gMC->Gsvolu("S07B","BOX",kBframeMaterial,bFramepar,3); | |
779 | gMC->Gsvolu("S08B","BOX",kBframeMaterial,bFramepar,3); | |
780 | ||
781 | index = 0; | |
782 | for (i = 0; i < kNslats4; i++){ | |
783 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { | |
784 | ||
785 | if (i == 0 && quadrant == 2) continue; | |
786 | if (i == 0 && quadrant == 4) continue; | |
787 | ||
788 | sprintf(idSlatCh7,"LC%d",ConvertSlatNum(i,quadrant,kNslats4-1)); | |
789 | sprintf(idSlatCh8,"LD%d",ConvertSlatNum(i,quadrant,kNslats4-1)); | |
790 | Float_t xvFrame = (slatLength4[i] - kVframeLength)/2.; | |
791 | ||
792 | // position the vertical frames | |
793 | if (i != 1) { | |
794 | GetEnvelopes(6)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); | |
795 | GetEnvelopes(6)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); | |
796 | GetEnvelopes(7)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); | |
797 | GetEnvelopes(7)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); | |
798 | } else { // no rounded spacer yet | |
799 | GetEnvelopes(6)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); | |
800 | // GetEnvelopes(6)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); | |
801 | GetEnvelopes(7)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); | |
802 | // GetEnvelopes(7)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); | |
803 | } | |
804 | // position the panels and the insulating material | |
805 | for (j = 0; j < kNPCB4[i]; j++){ | |
806 | if (i == 1 && j == 0) continue; | |
807 | index++; | |
808 | Float_t xx = kSensLength * (-kNPCB4[i]/2.+j+.5); | |
809 | ||
810 | Float_t zPanel = spar[2] - nomexbpar[2]; | |
811 | GetEnvelopes(6)->AddEnvelopeConstituent("S07X", idSlatCh7, 2*index-1,TGeoTranslation(xx,0.,zPanel)); | |
812 | GetEnvelopes(6)->AddEnvelopeConstituent("S07X", idSlatCh7, 2*index,TGeoTranslation(xx,0.,-zPanel)); | |
813 | GetEnvelopes(6)->AddEnvelopeConstituent("S07I", idSlatCh7, index,TGeoTranslation(xx,0.,0.)); | |
814 | GetEnvelopes(7)->AddEnvelopeConstituent("S08X", idSlatCh8, 2*index-1,TGeoTranslation(xx,0.,zPanel)); | |
815 | GetEnvelopes(7)->AddEnvelopeConstituent("S08X", idSlatCh8, 2*index,TGeoTranslation(xx,0.,-zPanel)); | |
816 | GetEnvelopes(7)->AddEnvelopeConstituent("S08I", idSlatCh8, index,TGeoTranslation(xx,0.,0.)); | |
817 | } | |
818 | } | |
819 | } | |
820 | ||
821 | // position the nomex volume inside the panel volume | |
822 | gMC->Gspos("S07N",1,"S07C",0.,0.,0.,0,"ONLY"); | |
823 | gMC->Gspos("S08N",1,"S08C",0.,0.,0.,0,"ONLY"); | |
824 | ||
825 | // position panel volume inside the bulk nomex material volume | |
826 | gMC->Gspos("S07C",1,"S07X",0.,0.,kNomexBWidth/2.,0,"ONLY"); | |
827 | gMC->Gspos("S08C",1,"S08X",0.,0.,kNomexBWidth/2.,0,"ONLY"); | |
828 | ||
829 | // position the PCB volume inside the insulating material volume | |
830 | gMC->Gspos("S07P",1,"S07I",0.,0.,0.,0,"ONLY"); | |
831 | gMC->Gspos("S08P",1,"S08I",0.,0.,0.,0,"ONLY"); | |
832 | ||
833 | // position the horizontal frame volume inside the PCB volume | |
834 | gMC->Gspos("S07H",1,"S07P",0.,0.,0.,0,"ONLY"); | |
835 | gMC->Gspos("S08H",1,"S08P",0.,0.,0.,0,"ONLY"); | |
836 | ||
837 | // position the sensitive volume inside the horizontal frame volume | |
838 | gMC->Gsposp("S07G",1,"S07H",0.,0.,0.,0,"ONLY",senspar,3); | |
839 | gMC->Gsposp("S08G",1,"S08H",0.,0.,0.,0,"ONLY",senspar,3); | |
840 | ||
841 | // position the border volumes inside the PCB volume | |
842 | Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.; | |
843 | gMC->Gspos("S07B",1,"S07P",0., yborder,0.,0,"ONLY"); | |
844 | gMC->Gspos("S07B",2,"S07P",0.,-yborder,0.,0,"ONLY"); | |
845 | gMC->Gspos("S08B",1,"S08P",0., yborder,0.,0,"ONLY"); | |
846 | gMC->Gspos("S08B",2,"S08P",0.,-yborder,0.,0,"ONLY"); | |
847 | ||
848 | // create the NULOC volume and position it in the horizontal frame | |
849 | ||
850 | gMC->Gsvolu("S07E","BOX",kNulocMaterial,nulocpar,3); | |
851 | gMC->Gsvolu("S08E","BOX",kNulocMaterial,nulocpar,3); | |
852 | index = 0; | |
853 | for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) { | |
854 | index++; | |
855 | gMC->Gspos("S07E",2*index-1,"S07B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); | |
856 | gMC->Gspos("S07E",2*index ,"S07B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY"); | |
857 | gMC->Gspos("S08E",2*index-1,"S08B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); | |
858 | gMC->Gspos("S08E",2*index ,"S08B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY"); | |
859 | } | |
860 | ||
861 | // position the volumes approximating the circular section of the pipe | |
862 | ||
863 | Float_t epsilon = 0.001; | |
864 | Int_t ndiv = 10; | |
865 | Int_t imax = 1; | |
866 | Double_t divpar[3]; | |
867 | Double_t dydiv = kSensHeight/ndiv; | |
868 | Double_t ydiv = (kSensHeight - dydiv)/2.; | |
b7ef3c96 | 869 | Float_t rmin = AliMUONConstants::Rmin(3); // Same radius for both chamber of St4 |
e516b01d | 870 | Float_t xdiv = 0.; |
871 | Float_t xvol; | |
872 | Float_t yvol; | |
873 | ||
874 | for (Int_t idiv = 0; idiv < ndiv; idiv++){ | |
875 | ydiv += dydiv; | |
876 | xdiv = 0.; | |
6f7aa53f | 877 | if (ydiv < rmin) xdiv = rmin * TMath::Sin( TMath::ACos((ydiv-dydiv/2.)/rmin) ); |
e516b01d | 878 | divpar[0] = (kPcbLength - xdiv)/2.; |
879 | divpar[1] = dydiv/2. - epsilon; | |
880 | divpar[2] = kSensWidth/2.; | |
881 | xvol = (kPcbLength + xdiv)/2.; | |
882 | yvol = ydiv ; | |
6296ba34 | 883 | |
e516b01d | 884 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
885 | sprintf(idSlatCh7,"LC%d",ConvertSlatNum(1,quadrant,kNslats4-1)); | |
886 | sprintf(idSlatCh8,"LD%d",ConvertSlatNum(1,quadrant,kNslats4-1)); | |
6296ba34 | 887 | |
e516b01d | 888 | GetEnvelopes(6)->AddEnvelopeConstituentParam("S07G",idSlatCh7, quadrant*100+imax+4*idiv+1, |
889 | TGeoTranslation(xvol-kPcbLength * kNPCB4[1]/2.,yvol-kPcbLength,0.),3,divpar); | |
6296ba34 | 890 | |
e516b01d | 891 | GetEnvelopes(7)->AddEnvelopeConstituentParam("S08G", idSlatCh8, quadrant*100+imax+4*idiv+1, |
892 | TGeoTranslation(xvol-kPcbLength * kNPCB4[1]/2.,yvol-kPcbLength,0.),3,divpar); | |
893 | } | |
d12a7158 | 894 | } |
e516b01d | 895 | // cout << "Geometry for Station 4...... done" << endl; |
896 | ||
897 | } | |
d1cd2474 | 898 | |
e516b01d | 899 | if (fStations[4]) { |
6296ba34 | 900 | |
d1cd2474 | 901 | |
e516b01d | 902 | // //******************************************************************** |
903 | // // Station 5 ** | |
904 | // //******************************************************************** | |
905 | // // indices 1 and 2 for first and second chambers in the station | |
906 | // // iChamber (first chamber) kept for other quanties than Z, | |
907 | // // assumed to be the same in both chambers | |
908 | // corrected geometry (JP. Cussonneau, Ch. Finck) | |
909 | ||
e118b27e | 910 | iChamber = &fMUON->Chamber(8); |
e516b01d | 911 | iChamber1 = iChamber; |
e118b27e | 912 | iChamber2 = &fMUON->Chamber(9); |
d1cd2474 | 913 | |
e516b01d | 914 | const Int_t kNslats5 = 7; // number of slats per quadrant |
915 | const Int_t kNPCB5[kNslats5] = {5, 6, 6, 6, 5, 4, 3}; // n PCB per slat | |
916 | const Float_t kXpos5[kNslats5] = {38.2, 0., 0., 0., 0., 0., 0.}; | |
917 | const Float_t kYpos5[kNslats5] = {0., 38.2, 37.9, 37.6, 37.3, 37.05, 36.75}; | |
918 | Float_t slatLength5[kNslats5]; | |
919 | ||
6ffd4cb7 | 920 | // Mother volume for each chamber |
921 | // Outer excess and inner recess for mother volume radius | |
922 | // with respect to ROuter and RInner | |
f29ba3e1 | 923 | Float_t dframepIn = kRframeHeight; |
924 | Float_t dframepOut= kVframeLength + 40.0; // Additional 40 cm gap is needed to wrap the corners of the slats | |
6ffd4cb7 | 925 | Float_t tpar[3]; |
b7ef3c96 | 926 | Double_t dstation = ( (-AliMUONConstants::DefaultChamberZ(9)) - |
927 | (-AliMUONConstants::DefaultChamberZ(8)) ) /2.3; | |
928 | tpar[0] = AliMUONConstants::Rmin(4)-dframepIn; | |
929 | tpar[1] = AliMUONConstants::Rmax(4)+dframepOut; | |
6ffd4cb7 | 930 | tpar[2] = dstation; |
931 | gMC->Gsvolu("CH09", "TUBE", idAir, tpar, 3); | |
932 | gMC->Gsvolu("CH10", "TUBE", idAir, tpar, 3); | |
6ffd4cb7 | 933 | |
e516b01d | 934 | // create and position the slat (mother) volumes |
935 | ||
936 | char idSlatCh9[5]; | |
937 | char idSlatCh10[5]; | |
938 | Float_t xSlat5; | |
939 | Float_t ySlat5 = 0; | |
940 | angle = 0.; | |
941 | ||
942 | for (i = 0; i < kNslats5; i++){ | |
943 | ||
944 | slatLength5[i] = kPcbLength * kNPCB5[i] + 2.* kVframeLength; | |
945 | xSlat5 = slatLength5[i]/2. + kDslatLength + kXpos5[i]; | |
946 | ySlat5 += kYpos5[i]; | |
947 | ||
948 | spar[0] = slatLength5[i]/2.; | |
949 | spar[1] = kSlatHeight/2.; | |
950 | spar[2] = kSlatWidth/2.; | |
951 | ||
952 | Float_t dzCh5 = dzCh; | |
953 | Float_t zSlat5 = (i%2 ==0)? -zSlat : zSlat; | |
954 | ||
955 | sprintf(idSlatCh9,"LE%d",kNslats5-1+i); | |
e856ab99 | 956 | detElemId = 913 - (i + kNslats5-1-6); |
eb1c3e3a | 957 | //gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3); |
e516b01d | 958 | GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5), |
959 | TGeoRotation("rot1",90,angle,90,90+angle,0,0) ); | |
960 | ||
961 | sprintf(idSlatCh9,"LE%d",3*kNslats5-2+i); | |
e856ab99 | 962 | detElemId = 900 + (i + kNslats5-1-6); |
eb1c3e3a | 963 | //gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3); |
e516b01d | 964 | GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5), |
965 | TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) ); | |
d1cd2474 | 966 | |
e516b01d | 967 | if (i > 0) { |
968 | sprintf(idSlatCh9,"LE%d",kNslats5-1-i); | |
e856ab99 | 969 | detElemId = 913 + (i + kNslats5-1-6); |
eb1c3e3a | 970 | //gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3); |
e516b01d | 971 | GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5), |
972 | TGeoRotation("rot3",90,angle,90,270+angle,180,0) ); | |
973 | ||
974 | sprintf(idSlatCh9,"LE%d",3*kNslats5-2-i); | |
e856ab99 | 975 | detElemId = 926 - (i + kNslats5-1-6); |
eb1c3e3a | 976 | //gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3); |
e516b01d | 977 | GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5), |
978 | TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) ); | |
979 | } | |
980 | ||
981 | sprintf(idSlatCh10,"LF%d",kNslats5-1+i); | |
e856ab99 | 982 | detElemId = 1013 - (i + kNslats5-1-6); |
eb1c3e3a | 983 | //gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3); |
e516b01d | 984 | GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5), |
985 | TGeoRotation("rot5",90,angle,90,90+angle,0,0) ); | |
986 | ||
987 | sprintf(idSlatCh10,"LF%d",3*kNslats5-2+i); | |
e856ab99 | 988 | detElemId = 1000 + (i + kNslats5-1-6); |
eb1c3e3a | 989 | //gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3); |
e516b01d | 990 | GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5), |
991 | TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) ); | |
992 | ||
993 | if (i > 0) { | |
994 | sprintf(idSlatCh10,"LF%d",kNslats5-1-i); | |
e856ab99 | 995 | detElemId = 1013 + (i + kNslats5-1-6); |
eb1c3e3a | 996 | //gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3); |
e516b01d | 997 | GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5), |
998 | TGeoRotation("rot7",90,angle,90,270+angle,180,0) ); | |
999 | sprintf(idSlatCh10,"LF%d",3*kNslats5-2-i); | |
e856ab99 | 1000 | detElemId = 1026 - (i + kNslats5-1-6); |
eb1c3e3a | 1001 | //gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3); |
e516b01d | 1002 | GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5), |
1003 | TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) ); | |
1004 | } | |
1005 | } | |
1006 | ||
1007 | // create the panel volume | |
d12a7158 | 1008 | |
e516b01d | 1009 | gMC->Gsvolu("S09C","BOX",kCarbonMaterial,panelpar,3); |
1010 | gMC->Gsvolu("S10C","BOX",kCarbonMaterial,panelpar,3); | |
1011 | ||
1012 | // create the nomex volume | |
1013 | ||
1014 | gMC->Gsvolu("S09N","BOX",kNomexMaterial,nomexpar,3); | |
1015 | gMC->Gsvolu("S10N","BOX",kNomexMaterial,nomexpar,3); | |
d1cd2474 | 1016 | |
d1cd2474 | 1017 | |
e516b01d | 1018 | // create the nomex volume (bulk) |
d1cd2474 | 1019 | |
e516b01d | 1020 | gMC->Gsvolu("S09X","BOX",kNomexBMaterial,nomexbpar,3); |
1021 | gMC->Gsvolu("S10X","BOX",kNomexBMaterial,nomexbpar,3); | |
d1cd2474 | 1022 | |
e516b01d | 1023 | // create the insulating material volume |
d1cd2474 | 1024 | |
e516b01d | 1025 | gMC->Gsvolu("S09I","BOX",kInsuMaterial,insupar,3); |
1026 | gMC->Gsvolu("S10I","BOX",kInsuMaterial,insupar,3); | |
c3b69531 | 1027 | |
e516b01d | 1028 | // create the PCB volume |
1029 | ||
1030 | gMC->Gsvolu("S09P","BOX",kPcbMaterial,pcbpar,3); | |
1031 | gMC->Gsvolu("S10P","BOX",kPcbMaterial,pcbpar,3); | |
d1cd2474 | 1032 | |
e516b01d | 1033 | // create the sensitive volumes, |
1034 | ||
1035 | gMC->Gsvolu("S09G","BOX",kSensMaterial,dum,0); | |
1036 | gMC->Gsvolu("S10G","BOX",kSensMaterial,dum,0); | |
1037 | ||
1038 | // create the vertical frame volume | |
1039 | ||
1040 | gMC->Gsvolu("S09V","BOX",kVframeMaterial,vFramepar,3); | |
1041 | gMC->Gsvolu("S10V","BOX",kVframeMaterial,vFramepar,3); | |
1042 | ||
1043 | // create the horizontal frame volume | |
1044 | ||
1045 | gMC->Gsvolu("S09H","BOX",kHframeMaterial,hFramepar,3); | |
1046 | gMC->Gsvolu("S10H","BOX",kHframeMaterial,hFramepar,3); | |
1047 | ||
1048 | // create the horizontal border volume | |
1049 | ||
1050 | gMC->Gsvolu("S09B","BOX",kBframeMaterial,bFramepar,3); | |
1051 | gMC->Gsvolu("S10B","BOX",kBframeMaterial,bFramepar,3); | |
1052 | ||
1053 | index = 0; | |
1054 | for (i = 0; i < kNslats5; i++){ | |
1055 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { | |
1056 | ||
1057 | if (i == 0 && quadrant == 2) continue; | |
1058 | if (i == 0 && quadrant == 4) continue; | |
1059 | ||
1060 | sprintf(idSlatCh9,"LE%d",ConvertSlatNum(i,quadrant,kNslats5-1)); | |
1061 | sprintf(idSlatCh10,"LF%d",ConvertSlatNum(i,quadrant,kNslats5-1)); | |
1062 | Float_t xvFrame = (slatLength5[i] - kVframeLength)/2.; // ok | |
1063 | ||
1064 | // position the vertical frames (spacers) | |
1065 | if (i != 1) { | |
1066 | GetEnvelopes(8)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); | |
1067 | GetEnvelopes(8)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); | |
1068 | GetEnvelopes(9)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); | |
1069 | GetEnvelopes(9)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); | |
1070 | } else { // no rounded spacer yet | |
1071 | GetEnvelopes(8)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); | |
1072 | // GetEnvelopes(8)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); | |
1073 | GetEnvelopes(9)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); | |
1074 | // GetEnvelopes(9)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); | |
1075 | } | |
1076 | ||
1077 | // position the panels and the insulating material | |
1078 | for (j = 0; j < kNPCB5[i]; j++){ | |
1079 | if (i == 1 && j == 0) continue; | |
1080 | index++; | |
1081 | Float_t xx = kSensLength * (-kNPCB5[i]/2.+j+.5); | |
1082 | ||
1083 | Float_t zPanel = spar[2] - nomexbpar[2]; | |
1084 | GetEnvelopes(8)->AddEnvelopeConstituent("S09X", idSlatCh9, 2*index-1,TGeoTranslation(xx,0.,zPanel)); | |
1085 | GetEnvelopes(8)->AddEnvelopeConstituent("S09X", idSlatCh9, 2*index,TGeoTranslation(xx,0.,-zPanel)); | |
1086 | GetEnvelopes(8)->AddEnvelopeConstituent("S09I", idSlatCh9, index,TGeoTranslation(xx,0.,0.)); | |
1087 | ||
1088 | GetEnvelopes(9)->AddEnvelopeConstituent("S10X", idSlatCh10, 2*index-1,TGeoTranslation(xx,0.,zPanel)); | |
1089 | GetEnvelopes(9)->AddEnvelopeConstituent("S10X", idSlatCh10, 2*index,TGeoTranslation(xx,0.,-zPanel)); | |
1090 | GetEnvelopes(9)->AddEnvelopeConstituent("S10I", idSlatCh10, index,TGeoTranslation(xx,0.,0.)); | |
1091 | } | |
1092 | } | |
1093 | } | |
1094 | ||
1095 | // position the nomex volume inside the panel volume | |
1096 | gMC->Gspos("S09N",1,"S09C",0.,0.,0.,0,"ONLY"); | |
1097 | gMC->Gspos("S10N",1,"S10C",0.,0.,0.,0,"ONLY"); | |
1098 | ||
1099 | // position panel volume inside the bulk nomex material volume | |
1100 | gMC->Gspos("S09C",1,"S09X",0.,0.,kNomexBWidth/2.,0,"ONLY"); | |
1101 | gMC->Gspos("S10C",1,"S10X",0.,0.,kNomexBWidth/2.,0,"ONLY"); | |
1102 | ||
1103 | // position the PCB volume inside the insulating material volume | |
1104 | gMC->Gspos("S09P",1,"S09I",0.,0.,0.,0,"ONLY"); | |
1105 | gMC->Gspos("S10P",1,"S10I",0.,0.,0.,0,"ONLY"); | |
1106 | ||
1107 | // position the horizontal frame volume inside the PCB volume | |
1108 | gMC->Gspos("S09H",1,"S09P",0.,0.,0.,0,"ONLY"); | |
1109 | gMC->Gspos("S10H",1,"S10P",0.,0.,0.,0,"ONLY"); | |
1110 | ||
1111 | // position the sensitive volume inside the horizontal frame volume | |
1112 | gMC->Gsposp("S09G",1,"S09H",0.,0.,0.,0,"ONLY",senspar,3); | |
1113 | gMC->Gsposp("S10G",1,"S10H",0.,0.,0.,0,"ONLY",senspar,3); | |
1114 | ||
1115 | // position the border volumes inside the PCB volume | |
1116 | Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.; | |
1117 | gMC->Gspos("S09B",1,"S09P",0., yborder,0.,0,"ONLY"); | |
1118 | gMC->Gspos("S09B",2,"S09P",0.,-yborder,0.,0,"ONLY"); | |
1119 | gMC->Gspos("S10B",1,"S10P",0., yborder,0.,0,"ONLY"); | |
1120 | gMC->Gspos("S10B",2,"S10P",0.,-yborder,0.,0,"ONLY"); | |
1121 | ||
1122 | // // create the NULOC volume and position it in the horizontal frame | |
1123 | ||
1124 | gMC->Gsvolu("S09E","BOX",kNulocMaterial,nulocpar,3); | |
1125 | gMC->Gsvolu("S10E","BOX",kNulocMaterial,nulocpar,3); | |
1126 | index = 0; | |
1127 | for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) { | |
1128 | index++; | |
1129 | gMC->Gspos("S09E",2*index-1,"S09B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); | |
1130 | gMC->Gspos("S09E",2*index ,"S09B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY"); | |
1131 | gMC->Gspos("S10E",2*index-1,"S10B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); | |
1132 | gMC->Gspos("S10E",2*index ,"S10B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY"); | |
1133 | } | |
1134 | ||
d1cd2474 | 1135 | |
e516b01d | 1136 | // position the volumes approximating the circular section of the pipe |
1137 | Float_t epsilon = 0.001; | |
1138 | Int_t ndiv = 10; | |
1139 | Int_t imax = 1; | |
1140 | Double_t divpar[3]; | |
1141 | Double_t dydiv = kSensHeight/ndiv; | |
1142 | Double_t ydiv = (kSensHeight - dydiv)/2.; | |
b7ef3c96 | 1143 | Float_t rmin = AliMUONConstants::Rmin(4); |
e516b01d | 1144 | Float_t xdiv = 0.; |
1145 | Float_t xvol; | |
1146 | Float_t yvol; | |
1147 | ||
1148 | for (Int_t idiv = 0; idiv < ndiv; idiv++){ | |
1149 | ydiv += dydiv; | |
1150 | xdiv = 0.; | |
6f7aa53f | 1151 | if (ydiv < rmin) xdiv = rmin * TMath::Sin( TMath::ACos((ydiv-dydiv/2.)/rmin) ); |
e516b01d | 1152 | divpar[0] = (kPcbLength - xdiv)/2.; |
1153 | divpar[1] = dydiv/2. - epsilon; | |
1154 | divpar[2] = kSensWidth/2.; | |
1155 | xvol = (kPcbLength + xdiv)/2.; | |
1156 | yvol = ydiv; | |
1157 | ||
1158 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { | |
1159 | sprintf(idSlatCh9,"LE%d",ConvertSlatNum(1,quadrant,kNslats5-1)); | |
1160 | sprintf(idSlatCh10,"LF%d",ConvertSlatNum(1,quadrant,kNslats5-1)); | |
1161 | ||
1162 | GetEnvelopes(8)->AddEnvelopeConstituentParam("S09G", idSlatCh9, quadrant*100+imax+4*idiv+1, | |
1163 | TGeoTranslation(xvol-kPcbLength * kNPCB5[1]/2.,yvol-kPcbLength,0.),3,divpar); | |
1164 | GetEnvelopes(9)->AddEnvelopeConstituentParam("S10G", idSlatCh10, quadrant*100+imax+4*idiv+1, | |
1165 | TGeoTranslation(xvol-kPcbLength * kNPCB5[1]/2.,yvol-kPcbLength,0.),3,divpar); | |
1166 | } | |
d1cd2474 | 1167 | } |
e516b01d | 1168 | // cout << "Geometry for Station 5...... done" << endl; |
1169 | ||
1170 | } | |
d1cd2474 | 1171 | } |
1172 | ||
1173 | ||
1174 | //______________________________________________________________________________ | |
1175 | void AliMUONSlatGeometryBuilder::SetTransformations() | |
1176 | { | |
2c9844e7 | 1177 | // Defines the transformations for the station345 chambers. |
d1cd2474 | 1178 | // --- |
eb1c3e3a | 1179 | |
1180 | if (gAlice->GetModule("DIPO")) { | |
1181 | // if DIPO is preset, the whole station will be placed in DDIP volume | |
1182 | SetMotherVolume(4, "DDIP"); | |
1183 | SetMotherVolume(5, "DDIP"); | |
1184 | SetVolume(4, "CH05", true); | |
1185 | SetVolume(5, "CH06", true); | |
1186 | } | |
1187 | else { | |
1188 | SetVolume(4, "CH05"); | |
1189 | SetVolume(5, "CH06"); | |
c0404a6c | 1190 | } |
1191 | ||
1192 | if (gAlice->GetModule("SHIL")) { | |
1193 | SetMotherVolume(6, "YOUT2"); | |
1194 | SetMotherVolume(7, "YOUT2"); | |
1195 | SetMotherVolume(8, "YOUT2"); | |
1196 | SetMotherVolume(9, "YOUT2"); | |
eb1c3e3a | 1197 | } |
c0404a6c | 1198 | |
eb1c3e3a | 1199 | SetVolume(6, "CH07"); |
1200 | SetVolume(7, "CH08"); | |
1201 | SetVolume(8, "CH09"); | |
1202 | SetVolume(9, "CH10"); | |
1203 | ||
2c9844e7 | 1204 | // Stations 345 are not perpendicular to the beam axis |
1205 | // See AliMUONConstants class | |
1206 | TGeoRotation st345inclination("rot99"); | |
1207 | st345inclination.RotateX(AliMUONConstants::St345Inclination()); | |
1208 | ||
b7ef3c96 | 1209 | Double_t zpos1= - AliMUONConstants::DefaultChamberZ(4); |
2c9844e7 | 1210 | SetTransformation(4, TGeoTranslation(0., 0., zpos1), st345inclination); |
b7ef3c96 | 1211 | |
1212 | zpos1= - AliMUONConstants::DefaultChamberZ(5); | |
2c9844e7 | 1213 | SetTransformation(5, TGeoTranslation(0., 0., zpos1), st345inclination); |
b7ef3c96 | 1214 | |
1215 | zpos1 = - AliMUONConstants::DefaultChamberZ(6); | |
2c9844e7 | 1216 | SetTransformation(6, TGeoTranslation(0., 0., zpos1), st345inclination); |
b7ef3c96 | 1217 | |
1218 | zpos1 = - AliMUONConstants::DefaultChamberZ(7); | |
2c9844e7 | 1219 | SetTransformation(7, TGeoTranslation(0., 0., zpos1), st345inclination ); |
b7ef3c96 | 1220 | |
1221 | zpos1 = - AliMUONConstants::DefaultChamberZ(8); | |
2c9844e7 | 1222 | SetTransformation(8, TGeoTranslation(0., 0., zpos1), st345inclination); |
b7ef3c96 | 1223 | |
1224 | zpos1 = - AliMUONConstants::DefaultChamberZ(9); | |
2c9844e7 | 1225 | SetTransformation(9, TGeoTranslation(0., 0., zpos1), st345inclination); |
d1cd2474 | 1226 | |
1227 | } | |
1228 | ||
1229 | //______________________________________________________________________________ | |
1230 | void AliMUONSlatGeometryBuilder::SetSensitiveVolumes() | |
1231 | { | |
1232 | // Defines the sensitive volumes for slat stations chambers. | |
1233 | // --- | |
1234 | ||
e118b27e | 1235 | GetGeometry(4)->SetSensitiveVolume("S05G"); |
1236 | GetGeometry(5)->SetSensitiveVolume("S06G"); | |
1237 | GetGeometry(6)->SetSensitiveVolume("S07G"); | |
1238 | GetGeometry(7)->SetSensitiveVolume("S08G"); | |
1239 | GetGeometry(8)->SetSensitiveVolume("S09G"); | |
1240 | GetGeometry(9)->SetSensitiveVolume("S10G"); | |
d1cd2474 | 1241 | } |
1242 | ||
1243 | //______________________________________________________________________________ | |
1244 | Int_t AliMUONSlatGeometryBuilder::ConvertSlatNum(Int_t numslat, Int_t quadnum, Int_t fspq) const | |
1245 | { | |
2057e0cc | 1246 | // On-line function establishing the correspondance between numslat (the slat number on a particular quadrant (numslat->0....4 for St3)) |
1247 | // and slatnum (the slat number on the whole panel (slatnum->1...18 for St3) | |
c10e6eaf | 1248 | numslat += 1; |
1249 | if (quadnum==2 || quadnum==3) | |
1250 | numslat += fspq; | |
1251 | else | |
1252 | numslat = fspq + 2-numslat; | |
1253 | numslat -= 1; | |
d1cd2474 | 1254 | |
c10e6eaf | 1255 | if (quadnum==3 || quadnum==4) numslat += 2*fspq+1; |
1256 | ||
1257 | return numslat; | |
d1cd2474 | 1258 | } |