| e118b27e |
1 | /************************************************************************** |
| 2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * |
| 3 | * * |
| 4 | * Author: The ALICE Off-line Project. * |
| 5 | * Contributors are mentioned in the code where appropriate. * |
| 6 | * * |
| 7 | * Permission to use, copy, modify and distribute this software and its * |
| 8 | * documentation strictly for non-commercial purposes is hereby granted * |
| 9 | * without fee, provided that the above copyright notice appears in all * |
| 10 | * copies and that both the copyright notice and this permission notice * |
| 11 | * appear in the supporting documentation. The authors make no claims * |
| 12 | * about the suitability of this software for any purpose. It is * |
| 13 | * provided "as is" without express or implied warranty. * |
| 14 | **************************************************************************/ |
| 15 | |
| d1cd2474 |
16 | // $Id$ |
| 17 | // |
| 18 | // Class AliMUONSlatGeometryBuilder |
| 19 | // ------------------------------- |
| 20 | // Abstract base class for geometry construction per chamber. |
| 21 | // |
| f4a7360f |
22 | |
| 2057e0cc |
23 | |
| 24 | |
| c10e6eaf |
25 | // This Builder is designed according to the enveloppe methode. The basic idea is to be able to allow moves |
| 26 | // of the slats on the support panels. |
| 27 | // Those moves can be described with a simple set of parameters. The next step should be now to describe all |
| 28 | // the slats and their places by a unique |
| 29 | // class, which would make the SlatBuilder far more compact since now only three parameters can define a slat |
| 30 | // and its position, like: |
| 2057e0cc |
31 | // * Bool_t rounded_shape_slat |
| 32 | // * Float_t slat_length |
| 33 | // * Float_t slat_number or Float_t slat_position |
| 34 | |
| d1cd2474 |
35 | #include <TVirtualMC.h> |
| d1cd2474 |
36 | #include <TGeoMatrix.h> |
| 30178c30 |
37 | #include <Riostream.h> |
| d1cd2474 |
38 | |
| e118b27e |
39 | #include "AliRun.h" |
| 40 | #include "AliLog.h" |
| 41 | |
| d1cd2474 |
42 | #include "AliMUONSlatGeometryBuilder.h" |
| 43 | #include "AliMUON.h" |
| 44 | #include "AliMUONChamber.h" |
| e118b27e |
45 | #include "AliMUONGeometryModule.h" |
| a432117a |
46 | #include "AliMUONGeometryEnvelopeStore.h" |
| e516b01d |
47 | #include "AliMUONConstants.h" |
| d1cd2474 |
48 | |
| 49 | ClassImp(AliMUONSlatGeometryBuilder) |
| 50 | |
| d1cd2474 |
51 | |
| 52 | //______________________________________________________________________________ |
| 53 | AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder(AliMUON* muon) |
| a432117a |
54 | : AliMUONVGeometryBuilder("slat.dat", |
| e118b27e |
55 | muon->Chamber(4).GetGeometry(), |
| 56 | muon->Chamber(5).GetGeometry(), |
| 57 | muon->Chamber(6).GetGeometry(), |
| 58 | muon->Chamber(7).GetGeometry(), |
| 59 | muon->Chamber(8).GetGeometry(), |
| 60 | muon->Chamber(9).GetGeometry()), |
| d1cd2474 |
61 | fMUON(muon) |
| 62 | { |
| 63 | // Standard constructor |
| 64 | |
| 65 | } |
| 66 | |
| 67 | //______________________________________________________________________________ |
| 68 | AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder() |
| 69 | : AliMUONVGeometryBuilder(), |
| 70 | fMUON(0) |
| 71 | { |
| 72 | // Default constructor |
| 73 | } |
| 74 | |
| 75 | |
| 76 | //______________________________________________________________________________ |
| 77 | AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder(const AliMUONSlatGeometryBuilder& rhs) |
| 78 | : AliMUONVGeometryBuilder(rhs) |
| 79 | { |
| 8c343c7c |
80 | AliFatal("Copy constructor is not implemented."); |
| d1cd2474 |
81 | } |
| 82 | |
| 83 | //______________________________________________________________________________ |
| 84 | AliMUONSlatGeometryBuilder::~AliMUONSlatGeometryBuilder() { |
| 85 | // |
| 86 | } |
| 87 | |
| 88 | //______________________________________________________________________________ |
| 89 | AliMUONSlatGeometryBuilder& |
| 90 | AliMUONSlatGeometryBuilder::operator = (const AliMUONSlatGeometryBuilder& rhs) |
| 91 | { |
| 92 | // check assignement to self |
| 93 | if (this == &rhs) return *this; |
| 94 | |
| 8c343c7c |
95 | AliFatal("Assignment operator is not implemented."); |
| d1cd2474 |
96 | |
| 97 | return *this; |
| 98 | } |
| 99 | |
| 100 | // |
| 101 | // public methods |
| 102 | // |
| 103 | |
| 104 | //______________________________________________________________________________ |
| 105 | void AliMUONSlatGeometryBuilder::CreateGeometry() |
| 106 | { |
| e516b01d |
107 | // CreateGeometry is the method containing all the informations concerning Stations 345 geometry. |
| 108 | // It includes description and placements of support panels and slats. |
| 109 | // The code comes directly from what was written in AliMUONv1.cxx before, with modifications concerning |
| 110 | // the use of Enveloppe method to place the Geant volumes. |
| 111 | // Now, few changes would allow the creation of a Slat methode where slat could be described by few parameters, |
| 112 | // and this builder would then be dedicated only to the |
| 113 | // placements of the slats. Those modifications could shorten the Station 345 geometry by a non-negligeable factor... |
| d1cd2474 |
114 | |
| e516b01d |
115 | Int_t *idtmed = fMUON->GetIdtmed()->GetArray()-1099; |
| 116 | |
| 117 | Float_t angle; |
| 118 | Float_t *dum=0; |
| 119 | |
| 120 | // define the id of tracking media: |
| 121 | Int_t idAir = idtmed[1100]; // medium 1 |
| 122 | Int_t idGas = idtmed[1108]; // medium 9 = Ar-CO2 gas (80%+20%) |
| 123 | Int_t idCopper = idtmed[1110]; |
| 124 | Int_t idG10 = idtmed[1111]; |
| 125 | Int_t idCarbon = idtmed[1112]; |
| 126 | Int_t idRoha = idtmed[1113]; |
| 127 | Int_t idNomex = idtmed[1114]; // honey comb |
| 128 | Int_t idNoryl = idtmed[1115]; |
| 129 | Int_t idNomexB = idtmed[1116]; // bulk material |
| 130 | |
| 131 | // sensitive area: 40*40 cm**2 |
| 132 | const Float_t kSensLength = 40.; |
| 133 | const Float_t kSensHeight = 40.; |
| 1c334adf |
134 | const Float_t kSensWidth = AliMUONConstants::Pitch()*2;// 0.5 cm, according to TDR fig 2.120 |
| e516b01d |
135 | const Int_t kSensMaterial = idGas; |
| 136 | // const Float_t kYoverlap = 1.5; |
| 137 | |
| 138 | // PCB dimensions in cm; width: 30 mum copper |
| 139 | const Float_t kPcbLength = kSensLength; |
| 140 | const Float_t kPcbHeight = 58.; // updated Ch. Finck |
| 141 | const Float_t kPcbWidth = 0.003; |
| 142 | const Int_t kPcbMaterial = idCopper; |
| 143 | |
| 144 | // Insulating material: 220 mum G10 fiber glued to pcb |
| 145 | const Float_t kInsuLength = kPcbLength; |
| 146 | const Float_t kInsuHeight = kPcbHeight; |
| 147 | const Float_t kInsuWidth = 0.022; // updated Ch. Finck |
| 148 | const Int_t kInsuMaterial = idG10; |
| 149 | |
| 150 | // Carbon fiber panels: 200mum carbon/epoxy skin |
| 151 | const Float_t kCarbonWidth = 0.020; |
| 152 | const Int_t kCarbonMaterial = idCarbon; |
| 153 | |
| 154 | // Nomex (honey comb) between the two panel carbon skins |
| 155 | const Float_t kNomexLength = kSensLength; |
| 156 | const Float_t kNomexHeight = kSensHeight; |
| 157 | const Float_t kNomexWidth = 0.8; // updated Ch. Finck |
| 158 | const Int_t kNomexMaterial = idNomex; |
| 159 | |
| 160 | // Bulk Nomex under panel sandwich Ch. Finck |
| 161 | const Float_t kNomexBWidth = 0.025; |
| 162 | const Int_t kNomexBMaterial = idNomexB; |
| 163 | |
| 164 | // Panel sandwich 0.02 carbon*2 + 0.8 nomex |
| 165 | const Float_t kPanelLength = kSensLength; |
| 166 | const Float_t kPanelHeight = kSensHeight; |
| 167 | const Float_t kPanelWidth = 2 * kCarbonWidth + kNomexWidth; |
| 168 | |
| f4a7360f |
169 | // Frame along the rounded (spacers) slats |
| 170 | const Float_t kRframeHeight = 2.00; |
| 171 | |
| e516b01d |
172 | // spacer around the slat: 2 sticks along length,2 along height |
| 173 | // H: the horizontal ones |
| 174 | const Float_t kHframeLength = kPcbLength; |
| 175 | const Float_t kHframeHeight = 1.95; // updated Ch. Finck |
| 176 | const Float_t kHframeWidth = kSensWidth; |
| 177 | const Int_t kHframeMaterial = idNoryl; |
| 178 | |
| 179 | // V: the vertical ones; vertical spacers |
| 180 | const Float_t kVframeLength = 2.5; |
| 181 | const Float_t kVframeHeight = kSensHeight + kHframeHeight; |
| 182 | const Float_t kVframeWidth = kSensWidth; |
| 183 | const Int_t kVframeMaterial = idNoryl; |
| 184 | |
| 185 | // B: the horizontal border filled with rohacell: ok Ch. Finck |
| 186 | const Float_t kBframeLength = kHframeLength; |
| 187 | const Float_t kBframeHeight = (kPcbHeight - kSensHeight)/2. - kHframeHeight; |
| 188 | const Float_t kBframeWidth = kHframeWidth; |
| 189 | const Int_t kBframeMaterial = idRoha; |
| 190 | |
| 191 | // NULOC: 30 mum copper + 200 mum vetronite (same radiation length as 14mum copper) for electronics |
| 192 | const Float_t kNulocLength = 2.5; |
| 193 | const Float_t kNulocHeight = kBframeHeight; |
| 194 | const Float_t kNulocWidth = 0.0030 + 0.0014; // equivalent copper width of vetronite; |
| 195 | const Int_t kNulocMaterial = idCopper; |
| 196 | |
| 197 | // Slat parameters |
| 198 | const Float_t kSlatHeight = kPcbHeight; |
| 199 | const Float_t kSlatWidth = kSensWidth + 2.*(kPcbWidth + kInsuWidth + kPanelWidth |
| 200 | + kNomexBWidth); //replaced rohacell with Nomex Ch. Finck |
| 201 | const Int_t kSlatMaterial = idAir; |
| 202 | const Float_t kDslatLength = -1.25; // position of the slat respect to the beam plane (half vertical spacer) Ch. Finck |
| 203 | Float_t zSlat = AliMUONConstants::DzSlat();// implemented Ch. Finck |
| 204 | Float_t dzCh = AliMUONConstants::DzCh(); |
| 205 | |
| 206 | Float_t spar[3]; |
| 207 | Int_t i, j; |
| 208 | Int_t detElemId; |
| 209 | |
| 210 | // the panel volume contains the nomex |
| 211 | Float_t panelpar[3] = { kPanelLength/2., kPanelHeight/2., kPanelWidth/2. }; |
| 212 | Float_t nomexpar[3] = { kNomexLength/2., kNomexHeight/2., kNomexWidth/2. }; |
| 213 | Float_t twidth = kPanelWidth + kNomexBWidth; |
| 214 | Float_t nomexbpar[3] = {kNomexLength/2., kNomexHeight/2.,twidth/2. };// bulk nomex |
| 215 | |
| 216 | // insulating material contains PCB-> gas |
| 217 | twidth = 2*(kInsuWidth + kPcbWidth) + kSensWidth ; |
| 218 | Float_t insupar[3] = {kInsuLength/2., kInsuHeight/2., twidth/2. }; |
| 219 | twidth -= 2 * kInsuWidth; |
| 220 | Float_t pcbpar[3] = {kPcbLength/2., kPcbHeight/2., twidth/2. }; |
| 221 | Float_t senspar[3] = {kSensLength/2., kSensHeight/2., kSensWidth/2. }; |
| 222 | Float_t theight = 2 * kHframeHeight + kSensHeight; |
| 223 | Float_t hFramepar[3] = {kHframeLength/2., theight/2., kHframeWidth/2.}; |
| 224 | Float_t bFramepar[3] = {kBframeLength/2., kBframeHeight/2., kBframeWidth/2.}; |
| 225 | Float_t vFramepar[3] = {kVframeLength/2., kVframeHeight/2., kVframeWidth/2.}; |
| 226 | Float_t nulocpar[3] = {kNulocLength/2., kNulocHeight/2., kNulocWidth/2.}; |
| 227 | |
| 228 | Float_t xx; |
| 229 | Float_t xxmax = (kBframeLength - kNulocLength)/2.; |
| 230 | Int_t index=0; |
| d1cd2474 |
231 | |
| e516b01d |
232 | AliMUONChamber *iChamber, *iChamber1, *iChamber2; |
| d12a7158 |
233 | |
| e516b01d |
234 | Int_t* fStations = new Int_t[5]; |
| 235 | for (Int_t i=0; i<5; i++) fStations[i] = 1; |
| 236 | fStations[2] = 1; |
| 237 | |
| 238 | if (fStations[2]) |
| d1cd2474 |
239 | { |
| e516b01d |
240 | //******************************************************************** |
| e118b27e |
241 | // Station 3 ** |
| 242 | //******************************************************************** |
| 243 | // indices 1 and 2 for first and second chambers in the station |
| 244 | // iChamber (first chamber) kept for other quanties than Z, |
| 245 | // assumed to be the same in both chambers |
| e516b01d |
246 | |
| e118b27e |
247 | iChamber = &fMUON->Chamber(4); |
| e516b01d |
248 | iChamber1 = iChamber; |
| e118b27e |
249 | iChamber2 = &fMUON->Chamber(5); |
| d1cd2474 |
250 | |
| e516b01d |
251 | //iChamber1->GetGeometry()->SetDebug(kTRUE); |
| 252 | //iChamber2->GetGeometry()->SetDebug(kTRUE); |
| e118b27e |
253 | |
| e516b01d |
254 | if (gAlice->GetModule("DIPO")) { |
| 255 | // if DIPO is preset, the whole station will be placed in DDIP volume |
| 256 | iChamber1->GetGeometry()->SetMotherVolume("DDIP"); |
| 257 | iChamber2->GetGeometry()->SetMotherVolume("DDIP"); |
| 258 | } |
| 259 | |
| 6ffd4cb7 |
260 | if (!gAlice->GetModule("DIPO")) { |
| 261 | // Mother volume for each chamber in st3 are only defined if Dipole volue is there. |
| 262 | // Outer excess and inner recess for mother volume radius |
| 263 | // with respect to ROuter and RInner |
| f4a7360f |
264 | Float_t dframep_in = kRframeHeight; |
| 265 | Float_t dframep_out= kVframeLength + 37.0; // Additional 37 cm gap is needed to wrap the corners of the slats |
| 6ffd4cb7 |
266 | Float_t tpar[3]; |
| 267 | Double_t dstation = ( (-iChamber2->Z()) - (-iChamber1->Z()) ) /2.1; |
| 268 | tpar[0] = iChamber1->RInner()-dframep_in; |
| 269 | tpar[1] = (iChamber1->ROuter()+dframep_out); |
| 270 | tpar[2] = dstation; |
| 271 | gMC->Gsvolu("CH05", "TUBE", idAir, tpar, 3); |
| 272 | gMC->Gsvolu("CH06", "TUBE", idAir, tpar, 3); |
| 273 | iChamber1->GetGeometry()->SetVolume("CH05"); |
| 274 | iChamber2->GetGeometry()->SetVolume("CH06"); |
| 275 | } |
| e516b01d |
276 | // volumes for slat geometry (xx=5,..,10 chamber id): |
| 277 | // Sxx0 Sxx1 Sxx2 Sxx3 --> Slat Mother volumes |
| 278 | // SxxG --> Sensitive volume (gas) |
| 279 | // SxxP --> PCB (copper) |
| 280 | // SxxI --> Insulator (G10) |
| 281 | // SxxC --> Carbon panel |
| 282 | // SxxN --> Nomex comb |
| 283 | // SxxX --> Nomex bulk |
| 284 | // SxxH, SxxV --> Horizontal and Vertical frames (Noryl) |
| 285 | // SB5x --> Volumes for the 35 cm long PCB |
| 286 | // slat dimensions: slat is a MOTHER volume!!! made of air |
| 287 | |
| 288 | // only for chamber 5: slat 1 has a PCB shorter by 5cm! |
| 289 | |
| 290 | Float_t tlength = 35.; |
| 291 | Float_t panelpar2[3] = { tlength/2., panelpar[1], panelpar[2]}; |
| 292 | Float_t nomexpar2[3] = { tlength/2., nomexpar[1], nomexpar[2]}; |
| 293 | Float_t nomexbpar2[3] = { tlength/2., nomexbpar[1], nomexbpar[2]}; |
| 294 | Float_t insupar2[3] = { tlength/2., insupar[1], insupar[2]}; |
| 295 | Float_t pcbpar2[3] = { tlength/2., pcbpar[1], pcbpar[2]}; |
| 296 | Float_t senspar2[3] = { tlength/2., senspar[1], senspar[2]}; |
| 297 | Float_t hFramepar2[3] = { tlength/2., hFramepar[1], hFramepar[2]}; |
| 298 | Float_t bFramepar2[3] = { tlength/2., bFramepar[1], bFramepar[2]}; |
| 299 | Float_t *dum=0; |
| 300 | Float_t pcbDLength3 = (kPcbLength - tlength); |
| 301 | |
| 302 | const Int_t kNslats3 = 5; // number of slats per quadrant |
| 303 | const Int_t kNPCB3[kNslats3] = {4, 4, 4, 3, 2}; // n PCB per slat |
| 304 | const Float_t kXpos3[kNslats3] = {0., 0., 0., 0., 0.};//{31., 0., 0., 0., 0.}; |
| 305 | const Float_t kYpos3[kNslats3] = {0, 37.8, 37.7, 37.3, 33.7}; |
| 306 | Float_t slatLength3[kNslats3]; |
| 307 | |
| 308 | // create and position the slat (mother) volumes |
| 309 | |
| 310 | char idSlatCh5[5]; |
| 311 | char idSlatCh6[5]; |
| 312 | Float_t xSlat3; |
| 313 | Float_t ySlat3 = 0; |
| 314 | Float_t angle = 0.; |
| 315 | Float_t spar2[3]; |
| 316 | for (i = 0; i < kNslats3; i++){ |
| 317 | |
| 318 | slatLength3[i] = kPcbLength * kNPCB3[i] + 2.* kVframeLength; |
| 319 | xSlat3 = slatLength3[i]/2. + kDslatLength + kXpos3[i]; |
| 320 | ySlat3 += kYpos3[i]; |
| 321 | |
| 322 | spar[0] = slatLength3[i]/2.; |
| 323 | spar[1] = kSlatHeight/2.; |
| 324 | spar[2] = kSlatWidth/2.; |
| 325 | // take away 5 cm from the first slat in chamber 5 |
| 7ddb761c |
326 | if (i == 0 || i == 1 || i == 2) { // 1 pcb is shortened by 5cm |
| e516b01d |
327 | spar2[0] = spar[0] - pcbDLength3/2.; |
| 328 | } else { |
| 329 | spar2[0] = spar[0]; |
| 330 | } |
| 331 | spar2[1] = spar[1]; |
| 332 | spar2[2] = spar[2]; |
| 333 | Float_t dzCh3 = dzCh; |
| 334 | Float_t zSlat3 = (i%2 ==0)? -zSlat : zSlat; // seems not that zSlat3 = zSlat4 & 5 refering to plan PQ7EN345-6 ? |
| 335 | |
| e856ab99 |
336 | sprintf(idSlatCh5,"LA%d",i+kNslats3-1); |
| e516b01d |
337 | gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3); |
| e856ab99 |
338 | detElemId = 509 - (i + kNslats3-1-4); |
| e516b01d |
339 | GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3), |
| 340 | TGeoRotation("rot1",90,angle,90,90+angle,0,0) ); |
| 341 | |
| 342 | sprintf(idSlatCh5,"LA%d",3*kNslats3-2+i); |
| 343 | gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3); |
| e856ab99 |
344 | detElemId = 500 + (i + kNslats3-1-4); |
| e516b01d |
345 | GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3), |
| 346 | TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) ); |
| 347 | |
| 348 | if (i > 0) { |
| 349 | sprintf(idSlatCh5,"LA%d",kNslats3-1-i); |
| 350 | gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3); |
| e856ab99 |
351 | detElemId = 509 + (i + kNslats3-1-4); |
| e516b01d |
352 | GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3), |
| 353 | TGeoRotation("rot3",90,angle,90,270+angle,180,0) ); |
| 354 | |
| 355 | sprintf(idSlatCh5,"LA%d",3*kNslats3-2-i); |
| 356 | gMC->Gsvolu(idSlatCh5,"BOX",kSlatMaterial,spar2,3); |
| e856ab99 |
357 | detElemId = 518 - (i + kNslats3-1-4); |
| e516b01d |
358 | GetEnvelopes(4)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3), |
| 359 | TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) ); |
| 360 | } |
| 361 | |
| 362 | sprintf(idSlatCh6,"LB%d",kNslats3-1+i); |
| 363 | gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar,3); |
| e856ab99 |
364 | detElemId = 609 - (i + kNslats3-1-4); |
| e516b01d |
365 | GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3), |
| 366 | TGeoRotation("rot5",90,angle,90,90+angle,0,0) ); |
| 367 | sprintf(idSlatCh6,"LB%d",3*kNslats3-2+i); |
| 368 | gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar,3); |
| e856ab99 |
369 | detElemId = 600 + (i + kNslats3-1-4); |
| e516b01d |
370 | GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3), |
| 371 | TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) ); |
| 372 | |
| 373 | if (i > 0) { |
| 374 | sprintf(idSlatCh6,"LB%d",kNslats3-1-i); |
| 375 | gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar,3); |
| e856ab99 |
376 | detElemId = 609 + (i + kNslats3-1-4); |
| e516b01d |
377 | GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3), |
| 378 | TGeoRotation("rot7",90,angle,90,270+angle,180,0) ); |
| 379 | |
| 380 | sprintf(idSlatCh6,"LB%d",3*kNslats3-2-i); |
| 381 | gMC->Gsvolu(idSlatCh6,"BOX",kSlatMaterial,spar,3); |
| e856ab99 |
382 | detElemId = 618 - (i + kNslats3-1-4); |
| e516b01d |
383 | GetEnvelopes(5)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3), |
| 384 | TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) ); |
| 385 | } |
| 386 | } |
| d1cd2474 |
387 | |
| e516b01d |
388 | // create the panel volume |
| d1cd2474 |
389 | |
| e516b01d |
390 | gMC->Gsvolu("S05C","BOX",kCarbonMaterial,panelpar,3); |
| 391 | gMC->Gsvolu("SB5C","BOX",kCarbonMaterial,panelpar2,3); |
| 392 | gMC->Gsvolu("S06C","BOX",kCarbonMaterial,panelpar,3); |
| 4846c3ab |
393 | |
| e516b01d |
394 | // create the nomex volume (honey comb) |
| d1cd2474 |
395 | |
| e516b01d |
396 | gMC->Gsvolu("S05N","BOX",kNomexMaterial,nomexpar,3); |
| 397 | gMC->Gsvolu("SB5N","BOX",kNomexMaterial,nomexpar2,3); |
| 398 | gMC->Gsvolu("S06N","BOX",kNomexMaterial,nomexpar,3); |
| 4846c3ab |
399 | |
| e516b01d |
400 | // create the nomex volume (bulk) |
| 401 | |
| 402 | gMC->Gsvolu("S05X","BOX",kNomexBMaterial,nomexbpar,3); |
| 403 | gMC->Gsvolu("SB5X","BOX",kNomexBMaterial,nomexbpar2,3); |
| 404 | gMC->Gsvolu("S06X","BOX",kNomexBMaterial,nomexbpar,3); |
| d1cd2474 |
405 | |
| e516b01d |
406 | // create the insulating material volume |
| 407 | |
| 408 | gMC->Gsvolu("S05I","BOX",kInsuMaterial,insupar,3); |
| 409 | gMC->Gsvolu("SB5I","BOX",kInsuMaterial,insupar2,3); |
| 410 | gMC->Gsvolu("S06I","BOX",kInsuMaterial,insupar,3); |
| 4846c3ab |
411 | |
| e516b01d |
412 | // create the PCB volume |
| d1cd2474 |
413 | |
| e516b01d |
414 | gMC->Gsvolu("S05P","BOX",kPcbMaterial,pcbpar,3); |
| 415 | gMC->Gsvolu("SB5P","BOX",kPcbMaterial,pcbpar2,3); |
| 416 | gMC->Gsvolu("S06P","BOX",kPcbMaterial,pcbpar,3); |
| d1cd2474 |
417 | |
| e516b01d |
418 | // create the sensitive volumes, |
| 4846c3ab |
419 | |
| e516b01d |
420 | gMC->Gsvolu("S05G","BOX",kSensMaterial,dum,0); |
| 421 | gMC->Gsvolu("S06G","BOX",kSensMaterial,dum,0); |
| d1cd2474 |
422 | |
| e516b01d |
423 | // create the vertical frame volume |
| d1cd2474 |
424 | |
| e516b01d |
425 | gMC->Gsvolu("S05V","BOX",kVframeMaterial,vFramepar,3); |
| 426 | gMC->Gsvolu("S06V","BOX",kVframeMaterial,vFramepar,3); |
| d1cd2474 |
427 | |
| e516b01d |
428 | // create the horizontal frame volume |
| d1cd2474 |
429 | |
| e516b01d |
430 | gMC->Gsvolu("S05H","BOX",kHframeMaterial,hFramepar,3); |
| 431 | gMC->Gsvolu("SB5H","BOX",kHframeMaterial,hFramepar2,3); |
| 432 | gMC->Gsvolu("S06H","BOX",kHframeMaterial,hFramepar,3); |
| 4846c3ab |
433 | |
| e516b01d |
434 | // create the horizontal border volume |
| d1cd2474 |
435 | |
| e516b01d |
436 | gMC->Gsvolu("S05B","BOX",kBframeMaterial,bFramepar,3); |
| 437 | gMC->Gsvolu("SB5B","BOX",kBframeMaterial,bFramepar2,3); |
| 438 | gMC->Gsvolu("S06B","BOX",kBframeMaterial,bFramepar,3); |
| 4846c3ab |
439 | |
| e516b01d |
440 | index = 0; |
| 441 | for (i = 0; i<kNslats3; i++){ |
| 442 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
| 443 | |
| 444 | if (i == 0 && quadrant == 2) continue; |
| 445 | if (i == 0 && quadrant == 4) continue; |
| 446 | |
| 447 | sprintf(idSlatCh5,"LA%d",ConvertSlatNum(i,quadrant,kNslats3-1)); |
| 448 | sprintf(idSlatCh6,"LB%d",ConvertSlatNum(i,quadrant,kNslats3-1)); |
| 449 | Float_t xvFrame = (slatLength3[i] - kVframeLength)/2.; |
| 450 | Float_t xvFrame2 = xvFrame; |
| 451 | |
| 452 | if (i == 0 || i == 1 || i == 2) xvFrame2 -= pcbDLength3/2.; |
| 453 | |
| 454 | // position the vertical frames |
| 455 | if ( i > 2) { |
| 456 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, |
| 457 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 458 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, |
| 459 | (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 460 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, |
| 461 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 462 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, |
| 463 | (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 464 | } |
| 465 | |
| 466 | if (i == 2) { |
| 467 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, |
| 468 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame2,0.,0.)); |
| 469 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, |
| 470 | (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 471 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, |
| 472 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 473 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, |
| 474 | (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 475 | } |
| 476 | |
| 477 | if (i == 0 || i == 1) { // no rounded spacer for the moment (Ch. Finck) |
| 478 | GetEnvelopes(4)->AddEnvelopeConstituent("S05V", idSlatCh5, |
| 479 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame2,0.,0.)); |
| 480 | GetEnvelopes(5)->AddEnvelopeConstituent("S06V", idSlatCh6, |
| 481 | (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 482 | } |
| 483 | |
| 484 | // position the panels and the insulating material |
| 485 | for (j = 0; j < kNPCB3[i]; j++){ |
| 486 | if (i == 1 && j == 0) continue; |
| 487 | if (i == 0 && j == 0) continue; |
| 488 | index++; |
| 489 | Float_t xx = kSensLength * (-kNPCB3[i]/2. + j + 0.5); |
| 490 | Float_t xx2 = xx - pcbDLength3/2.; |
| d1cd2474 |
491 | |
| e516b01d |
492 | Float_t zPanel = spar[2] - nomexbpar[2]; |
| 493 | |
| 494 | if ( (i == 0 || i == 1 || i == 2) && j == kNPCB3[i]-1) { // 1 pcb is shortened by 5cm |
| 495 | GetEnvelopes(4)->AddEnvelopeConstituent("SB5X", idSlatCh5, 2*index-1,TGeoTranslation(xx2,0.,zPanel)); |
| 496 | GetEnvelopes(4)->AddEnvelopeConstituent("SB5X", idSlatCh5, 2*index,TGeoTranslation(xx2,0.,-zPanel)); |
| 497 | GetEnvelopes(4)->AddEnvelopeConstituent("SB5I", idSlatCh5, index,TGeoTranslation(xx2,0.,0.)); |
| 498 | } else { |
| 499 | GetEnvelopes(4)->AddEnvelopeConstituent("S05X", idSlatCh5, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
| 500 | GetEnvelopes(4)->AddEnvelopeConstituent("S05X", idSlatCh5, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
| 501 | GetEnvelopes(4)->AddEnvelopeConstituent("S05I", idSlatCh5, index,TGeoTranslation(xx,0.,0.)); |
| 502 | } |
| 503 | GetEnvelopes(5)->AddEnvelopeConstituent("S06X", idSlatCh6, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
| 504 | GetEnvelopes(5)->AddEnvelopeConstituent("S06X", idSlatCh6, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
| 505 | GetEnvelopes(5)->AddEnvelopeConstituent("S06I", idSlatCh6, index,TGeoTranslation(xx,0.,0.)); |
| d1cd2474 |
506 | |
| e516b01d |
507 | } |
| 508 | } |
| 509 | } |
| 510 | |
| 511 | // position the nomex volume inside the panel volume |
| 512 | gMC->Gspos("S05N",1,"S05C",0.,0.,0.,0,"ONLY"); |
| 513 | gMC->Gspos("SB5N",1,"SB5C",0.,0.,0.,0,"ONLY"); |
| 514 | gMC->Gspos("S06N",1,"S06C",0.,0.,0.,0,"ONLY"); |
| 4846c3ab |
515 | |
| e516b01d |
516 | // position panel volume inside the bulk nomex material volume |
| 517 | gMC->Gspos("S05C",1,"S05X",0.,0.,kNomexBWidth/2.,0,"ONLY"); |
| 518 | gMC->Gspos("SB5C",1,"SB5X",0.,0.,kNomexBWidth/2.,0,"ONLY"); |
| 519 | gMC->Gspos("S06C",1,"S06X",0.,0.,kNomexBWidth/2.,0,"ONLY"); |
| 520 | |
| 521 | // position the PCB volume inside the insulating material volume |
| 522 | gMC->Gspos("S05P",1,"S05I",0.,0.,0.,0,"ONLY"); |
| 523 | gMC->Gspos("SB5P",1,"SB5I",0.,0.,0.,0,"ONLY"); |
| 524 | gMC->Gspos("S06P",1,"S06I",0.,0.,0.,0,"ONLY"); |
| 4846c3ab |
525 | |
| e516b01d |
526 | // position the horizontal frame volume inside the PCB volume |
| 527 | gMC->Gspos("S05H",1,"S05P",0.,0.,0.,0,"ONLY"); |
| 528 | gMC->Gspos("SB5H",1,"SB5P",0.,0.,0.,0,"ONLY"); |
| 529 | gMC->Gspos("S06H",1,"S06P",0.,0.,0.,0,"ONLY"); |
| 4846c3ab |
530 | |
| e516b01d |
531 | // position the sensitive volume inside the horizontal frame volume |
| 532 | gMC->Gsposp("S05G",1,"S05H",0.,0.,0.,0,"ONLY",senspar,3); |
| 533 | gMC->Gsposp("S05G",1,"SB5H",0.,0.,0.,0,"ONLY",senspar2,3); |
| 534 | gMC->Gsposp("S06G",1,"S06H",0.,0.,0.,0,"ONLY",senspar,3); |
| 4846c3ab |
535 | |
| 536 | |
| e516b01d |
537 | // position the border volumes inside the PCB volume |
| 538 | Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.; |
| 539 | gMC->Gspos("S05B",1,"S05P",0., yborder,0.,0,"ONLY"); |
| 540 | gMC->Gspos("S05B",2,"S05P",0.,-yborder,0.,0,"ONLY"); |
| 541 | gMC->Gspos("SB5B",1,"SB5P",0., yborder,0.,0,"ONLY"); |
| 542 | gMC->Gspos("SB5B",2,"SB5P",0.,-yborder,0.,0,"ONLY"); |
| 543 | |
| 544 | gMC->Gspos("S06B",1,"S06P",0., yborder,0.,0,"ONLY"); |
| 545 | gMC->Gspos("S06B",2,"S06P",0.,-yborder,0.,0,"ONLY"); |
| 4846c3ab |
546 | |
| e516b01d |
547 | // create the NULOC volume and position it in the horizontal frame |
| 548 | gMC->Gsvolu("S05E","BOX",kNulocMaterial,nulocpar,3); |
| 549 | gMC->Gsvolu("S06E","BOX",kNulocMaterial,nulocpar,3); |
| 550 | index = 0; |
| 551 | Float_t xxmax2 = xxmax - pcbDLength3/2.; |
| 552 | for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) { |
| 553 | index++; |
| 554 | gMC->Gspos("S05E",2*index-1,"S05B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); |
| 555 | gMC->Gspos("S05E",2*index ,"S05B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY"); |
| 556 | gMC->Gspos("S06E",2*index-1,"S06B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); |
| 557 | gMC->Gspos("S06E",2*index ,"S06B", xx, 0., kBframeWidth/2.- kNulocWidth/2, 0, "ONLY"); |
| 558 | if (xx > -xxmax2 && xx< xxmax2) { |
| 559 | gMC->Gspos("S05E",2*index-1,"SB5B", xx, 0.,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY"); |
| 560 | gMC->Gspos("S05E",2*index ,"SB5B", xx, 0., kBframeWidth/2.- kNulocWidth/2, 0, "ONLY"); |
| 561 | } |
| 562 | } |
| 563 | |
| 564 | // position the volumes approximating the circular section of the pipe |
| 565 | Float_t epsilon = 0.001; |
| 566 | Int_t ndiv = 6; |
| 567 | Int_t imax = 1; |
| 568 | Double_t divpar[3]; |
| 569 | Double_t dydiv = kSensHeight/ndiv; |
| 570 | Double_t ydiv = (kSensHeight - dydiv)/2.; |
| f4a7360f |
571 | Double_t rmin = iChamber1->RInner();// Same radius for both chamber in St3 |
| e516b01d |
572 | Double_t xdiv = 0.; |
| 573 | Float_t xvol; |
| 574 | Float_t yvol; |
| 575 | |
| 576 | for (Int_t idiv = 0; idiv < ndiv; idiv++){ |
| 577 | ydiv += dydiv; |
| 578 | xdiv = 0.; |
| 6f7aa53f |
579 | if (ydiv < rmin) xdiv = rmin * TMath::Sin( TMath::ACos((ydiv-dydiv/2.)/rmin) ); |
| e516b01d |
580 | divpar[0] = (kPcbLength - xdiv)/2.; |
| 581 | divpar[1] = dydiv/2. - epsilon; |
| 582 | divpar[2] = kSensWidth/2.; |
| 583 | xvol = (kPcbLength + xdiv)/2.; |
| 584 | yvol = ydiv; |
| 585 | |
| 586 | // Volumes close to the beam pipe for slat i=1 so 4 slats per chamber |
| 587 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
| 588 | sprintf(idSlatCh5,"LA%d",ConvertSlatNum(1,quadrant,kNslats3-1)); |
| 589 | sprintf(idSlatCh6,"LB%d",ConvertSlatNum(1,quadrant,kNslats3-1)); |
| 590 | |
| 591 | GetEnvelopes(4)->AddEnvelopeConstituentParam("S05G", idSlatCh5, quadrant*100+imax+4*idiv+1, |
| 592 | TGeoTranslation(xvol-(kPcbLength * kNPCB3[1]/2.),yvol-kPcbLength,0.),3,divpar); |
| 593 | |
| 594 | GetEnvelopes(5)->AddEnvelopeConstituentParam("S06G", idSlatCh6, quadrant*100+imax+4*idiv+1, |
| 595 | TGeoTranslation(xvol-(kPcbLength * kNPCB3[1]/2.),yvol-kPcbLength,0.),3,divpar); |
| 596 | } |
| 597 | } |
| 598 | |
| 599 | // Volumes close to the beam pipe for slat i=0 so 2 slats per chamber (central slat for station 3) |
| 600 | // Gines Martinez, Subatech sep 04 |
| 601 | // 9 box volumes are used to define the PCB closed to the beam pipe of the slat 122000SR1 of chamber 5 and 6 of St3 |
| 602 | // Accordingly to plan PQ-LAT-SR1 of CEA-DSM-DAPNIA-SIS/BE ph HARDY 8-Oct-2002 |
| 603 | // Rmin = 31.5 cm |
| f4a7360f |
604 | rmin = iChamber1->RInner(); // Same radius for both chamber in St3 |
| e516b01d |
605 | ndiv = 9; |
| 606 | dydiv = kSensHeight/ndiv; // Vertical size of the box volume approximating the rounded PCB |
| 607 | ydiv = -kSensHeight/2 + dydiv/2.; // Initializing vertical position of the volume from bottom |
| 608 | xdiv = 0.; // Initializing horizontal position of the box volumes |
| 609 | |
| 610 | for (Int_t idiv = 0; idiv < ndiv; idiv++){ |
| 611 | xdiv = TMath::Abs( rmin * TMath::Sin( TMath::ACos(ydiv/rmin) ) ); |
| 612 | divpar[0] = (kPcbLength - xdiv)/2.; // Dimension of the box volume |
| 613 | divpar[1] = dydiv/2. - epsilon; |
| 614 | divpar[2] = kSensWidth/2.; |
| 615 | xvol = (kPcbLength + xdiv)/2.; //2D traslition for positionning of box volume |
| 616 | yvol = ydiv; |
| 617 | Int_t side; |
| 618 | for (side = 1; side <= 2; side++) { |
| 619 | sprintf(idSlatCh5,"LA%d",4); |
| 620 | sprintf(idSlatCh6,"LB%d",4); |
| 621 | if(side == 2) { |
| 622 | sprintf(idSlatCh5,"LA%d",13); |
| 623 | sprintf(idSlatCh6,"LB%d",13); |
| 624 | } |
| 625 | GetEnvelopes(4)->AddEnvelopeConstituentParam("S05G", idSlatCh5,500+side*100+imax+4*idiv+1, |
| 626 | TGeoTranslation(xvol-(kPcbLength * kNPCB3[0]/2.),yvol,0.),3,divpar); |
| 627 | |
| 628 | GetEnvelopes(5)->AddEnvelopeConstituentParam("S06G", idSlatCh6,500+side*100+imax+4*idiv+1, |
| 629 | TGeoTranslation(xvol-(kPcbLength * kNPCB3[0]/2.),yvol,0.),3,divpar); |
| 630 | } |
| 631 | ydiv += dydiv; // Going from bottom to top |
| 632 | } |
| 633 | // cout << "Geometry for Station 3...... done" << endl; |
| d1cd2474 |
634 | } |
| 635 | |
| e516b01d |
636 | if (fStations[3]) { |
| d1cd2474 |
637 | |
| 638 | |
| e516b01d |
639 | // //******************************************************************** |
| 640 | // // Station 4 ** |
| 641 | // //******************************************************************** |
| 642 | // // indices 1 and 2 for first and second chambers in the station |
| 643 | // // iChamber (first chamber) kept for other quanties than Z, |
| 644 | // // assumed to be the same in both chambers |
| 645 | // corrected geometry (JP. Cussonneau, Ch. Finck) |
| d1cd2474 |
646 | |
| e118b27e |
647 | iChamber = &fMUON->Chamber(6); |
| e516b01d |
648 | iChamber1 = iChamber; |
| e118b27e |
649 | iChamber2 = &fMUON->Chamber(7); |
| e516b01d |
650 | |
| 651 | const Int_t kNslats4 = 7; // number of slats per quadrant |
| 652 | const Int_t kNPCB4[kNslats4] = {5, 6, 5, 5, 4, 3, 2}; // n PCB per slat |
| 653 | const Float_t kXpos4[kNslats4] = {38.2, 0., 0., 0., 0., 0., 0.}; |
| 654 | const Float_t kYpos41[kNslats4] = {0., 38.2, 34.40, 36.60, 29.3, 37.0, 28.6}; |
| 655 | const Float_t kYpos42[kNslats4] = {0., 38.2, 37.85, 37.55, 29.4, 37.0, 28.6}; |
| 656 | |
| 657 | Float_t slatLength4[kNslats4]; |
| 658 | |
| 6ffd4cb7 |
659 | |
| 660 | // Mother volume for each chamber |
| 661 | // Outer excess and inner recess for mother volume radius |
| 662 | // with respect to ROuter and RInner |
| f4a7360f |
663 | Float_t dframep_in = kRframeHeight; |
| 664 | Float_t dframep_out= kVframeLength + 40.0; // Additional 30 cm gap is needed to wrap the corners of the slats |
| 6ffd4cb7 |
665 | Float_t tpar[3]; |
| 666 | Double_t dstation = ( (-iChamber2->Z()) - (-iChamber1->Z()) ) /2.1; |
| 667 | tpar[0] = iChamber1->RInner()-dframep_in; |
| 668 | tpar[1] = (iChamber1->ROuter()+dframep_out); |
| 669 | tpar[2] = dstation; |
| 670 | gMC->Gsvolu("CH07", "TUBE", idAir, tpar, 3); |
| 671 | gMC->Gsvolu("CH08", "TUBE", idAir, tpar, 3); |
| 672 | iChamber1->GetGeometry()->SetVolume("CH07"); |
| 673 | iChamber2->GetGeometry()->SetVolume("CH08"); |
| 674 | |
| e516b01d |
675 | // create and position the slat (mother) volumes |
| 676 | |
| 677 | char idSlatCh7[5]; |
| 678 | char idSlatCh8[5]; |
| 679 | Float_t xSlat4; |
| 680 | Float_t ySlat41 = 0; |
| 681 | Float_t ySlat42 = 0; |
| 682 | |
| 683 | angle = 0.; |
| 684 | |
| 685 | for (i = 0; i<kNslats4; i++){ |
| 686 | slatLength4[i] = kPcbLength * kNPCB4[i] + 2. * kVframeLength; |
| 687 | xSlat4 = slatLength4[i]/2. + kDslatLength + kXpos4[i]; |
| 688 | ySlat41 += kYpos41[i]; |
| 689 | ySlat42 += kYpos42[i]; |
| 690 | |
| 691 | spar[0] = slatLength4[i]/2.; |
| 692 | spar[1] = kSlatHeight/2.; |
| 693 | spar[2] = kSlatWidth/2.; |
| 694 | Float_t dzCh4 = dzCh; |
| 695 | Float_t zSlat4 = (i%2 ==0)? -zSlat : zSlat; |
| 696 | |
| 697 | sprintf(idSlatCh7,"LC%d",kNslats4-1+i); |
| 698 | gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3); |
| e856ab99 |
699 | detElemId = 713 - (i + kNslats4-1-6); |
| e516b01d |
700 | GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, ySlat41, -zSlat4 + dzCh4), |
| 701 | TGeoRotation("rot1",90,angle,90,90+angle,0,0) ); |
| 702 | |
| 703 | sprintf(idSlatCh7,"LC%d",3*kNslats4-2+i); |
| 704 | gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3); |
| e856ab99 |
705 | detElemId = 700 + (i + kNslats4-1-6); |
| e516b01d |
706 | GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(-xSlat4, ySlat41, zSlat4 - dzCh4), |
| 707 | TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) ); |
| d1cd2474 |
708 | |
| e516b01d |
709 | if (i > 0) { |
| 710 | sprintf(idSlatCh7,"LC%d",kNslats4-1-i); |
| 711 | gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3); |
| e856ab99 |
712 | detElemId = 713 + (i + kNslats4-1-6); |
| e516b01d |
713 | GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, -ySlat41, -zSlat4 + dzCh4), |
| 714 | TGeoRotation("rot3",90,angle,90,270+angle,180,0) ); |
| 715 | |
| 716 | sprintf(idSlatCh7,"LC%d",3*kNslats4-2-i); |
| e856ab99 |
717 | detElemId = 726 - (i + kNslats4-1-6); |
| e516b01d |
718 | gMC->Gsvolu(idSlatCh7,"BOX",kSlatMaterial,spar,3); |
| 719 | GetEnvelopes(6)->AddEnvelope(idSlatCh7, detElemId, true, |
| 720 | TGeoTranslation(-xSlat4, -ySlat41, zSlat4 - dzCh4), |
| 721 | TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) ); |
| 722 | } |
| 723 | |
| 724 | sprintf(idSlatCh8,"LD%d",kNslats4-1+i); |
| 725 | gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3); |
| e856ab99 |
726 | detElemId = 813 - (i + kNslats4-1-6); |
| e516b01d |
727 | GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, ySlat42, -zSlat4 + dzCh4), |
| 728 | TGeoRotation("rot5",90,angle,90,90+angle,0,0) ); |
| 729 | |
| 730 | sprintf(idSlatCh8,"LD%d",3*kNslats4-2+i); |
| e856ab99 |
731 | detElemId = 800 + (i + kNslats4-1-6); |
| e516b01d |
732 | gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3); |
| 733 | GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, ySlat42, zSlat4 - dzCh4), |
| 734 | TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) ); |
| 735 | if (i > 0) { |
| 736 | sprintf(idSlatCh8,"LD%d",kNslats4-1-i); |
| e856ab99 |
737 | detElemId = 813 + (i + kNslats4-1-6); |
| e516b01d |
738 | gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3); |
| 739 | GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, -ySlat42, -zSlat4 + dzCh4), |
| 740 | TGeoRotation("rot7",90,angle,90,270+angle,180,0) ); |
| 741 | sprintf(idSlatCh8,"LD%d",3*kNslats4-2-i); |
| e856ab99 |
742 | detElemId = 826 - (i + kNslats4-1-6); |
| e516b01d |
743 | gMC->Gsvolu(idSlatCh8,"BOX",kSlatMaterial,spar,3); |
| 744 | GetEnvelopes(7)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, -ySlat42, zSlat4 - dzCh4), |
| 745 | TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) ); |
| 746 | } |
| 747 | } |
| d1cd2474 |
748 | |
| e516b01d |
749 | // create the panel volume |
| d1cd2474 |
750 | |
| e516b01d |
751 | gMC->Gsvolu("S07C","BOX",kCarbonMaterial,panelpar,3); |
| 752 | gMC->Gsvolu("S08C","BOX",kCarbonMaterial,panelpar,3); |
| d1cd2474 |
753 | |
| e516b01d |
754 | // create the nomex volume |
| d1cd2474 |
755 | |
| e516b01d |
756 | gMC->Gsvolu("S07N","BOX",kNomexMaterial,nomexpar,3); |
| 757 | gMC->Gsvolu("S08N","BOX",kNomexMaterial,nomexpar,3); |
| d1cd2474 |
758 | |
| d1cd2474 |
759 | |
| e516b01d |
760 | // create the nomex volume (bulk) |
| d1cd2474 |
761 | |
| e516b01d |
762 | gMC->Gsvolu("S07X","BOX",kNomexBMaterial,nomexbpar,3); |
| 763 | gMC->Gsvolu("S08X","BOX",kNomexBMaterial,nomexbpar,3); |
| d1cd2474 |
764 | |
| e516b01d |
765 | // create the insulating material volume |
| 766 | |
| 767 | gMC->Gsvolu("S07I","BOX",kInsuMaterial,insupar,3); |
| 768 | gMC->Gsvolu("S08I","BOX",kInsuMaterial,insupar,3); |
| 769 | |
| 770 | // create the PCB volume |
| 771 | |
| 772 | gMC->Gsvolu("S07P","BOX",kPcbMaterial,pcbpar,3); |
| 773 | gMC->Gsvolu("S08P","BOX",kPcbMaterial,pcbpar,3); |
| d1cd2474 |
774 | |
| e516b01d |
775 | // create the sensitive volumes, |
| 776 | |
| 777 | gMC->Gsvolu("S07G","BOX",kSensMaterial,dum,0); |
| 778 | gMC->Gsvolu("S08G","BOX",kSensMaterial,dum,0); |
| 779 | |
| 780 | // create the vertical frame volume |
| 781 | |
| 782 | gMC->Gsvolu("S07V","BOX",kVframeMaterial,vFramepar,3); |
| 783 | gMC->Gsvolu("S08V","BOX",kVframeMaterial,vFramepar,3); |
| 784 | |
| 785 | // create the horizontal frame volume |
| 786 | |
| 787 | gMC->Gsvolu("S07H","BOX",kHframeMaterial,hFramepar,3); |
| 788 | gMC->Gsvolu("S08H","BOX",kHframeMaterial,hFramepar,3); |
| 789 | |
| 790 | // create the horizontal border volume |
| 791 | |
| 792 | gMC->Gsvolu("S07B","BOX",kBframeMaterial,bFramepar,3); |
| 793 | gMC->Gsvolu("S08B","BOX",kBframeMaterial,bFramepar,3); |
| 794 | |
| 795 | index = 0; |
| 796 | for (i = 0; i < kNslats4; i++){ |
| 797 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
| 798 | |
| 799 | if (i == 0 && quadrant == 2) continue; |
| 800 | if (i == 0 && quadrant == 4) continue; |
| 801 | |
| 802 | sprintf(idSlatCh7,"LC%d",ConvertSlatNum(i,quadrant,kNslats4-1)); |
| 803 | sprintf(idSlatCh8,"LD%d",ConvertSlatNum(i,quadrant,kNslats4-1)); |
| 804 | Float_t xvFrame = (slatLength4[i] - kVframeLength)/2.; |
| 805 | |
| 806 | // position the vertical frames |
| 807 | if (i != 1) { |
| 808 | GetEnvelopes(6)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 809 | GetEnvelopes(6)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 810 | GetEnvelopes(7)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 811 | GetEnvelopes(7)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 812 | } else { // no rounded spacer yet |
| 813 | GetEnvelopes(6)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 814 | // GetEnvelopes(6)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 815 | GetEnvelopes(7)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 816 | // GetEnvelopes(7)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 817 | } |
| 818 | // position the panels and the insulating material |
| 819 | for (j = 0; j < kNPCB4[i]; j++){ |
| 820 | if (i == 1 && j == 0) continue; |
| 821 | index++; |
| 822 | Float_t xx = kSensLength * (-kNPCB4[i]/2.+j+.5); |
| 823 | |
| 824 | Float_t zPanel = spar[2] - nomexbpar[2]; |
| 825 | GetEnvelopes(6)->AddEnvelopeConstituent("S07X", idSlatCh7, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
| 826 | GetEnvelopes(6)->AddEnvelopeConstituent("S07X", idSlatCh7, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
| 827 | GetEnvelopes(6)->AddEnvelopeConstituent("S07I", idSlatCh7, index,TGeoTranslation(xx,0.,0.)); |
| 828 | GetEnvelopes(7)->AddEnvelopeConstituent("S08X", idSlatCh8, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
| 829 | GetEnvelopes(7)->AddEnvelopeConstituent("S08X", idSlatCh8, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
| 830 | GetEnvelopes(7)->AddEnvelopeConstituent("S08I", idSlatCh8, index,TGeoTranslation(xx,0.,0.)); |
| 831 | } |
| 832 | } |
| 833 | } |
| 834 | |
| 835 | // position the nomex volume inside the panel volume |
| 836 | gMC->Gspos("S07N",1,"S07C",0.,0.,0.,0,"ONLY"); |
| 837 | gMC->Gspos("S08N",1,"S08C",0.,0.,0.,0,"ONLY"); |
| 838 | |
| 839 | // position panel volume inside the bulk nomex material volume |
| 840 | gMC->Gspos("S07C",1,"S07X",0.,0.,kNomexBWidth/2.,0,"ONLY"); |
| 841 | gMC->Gspos("S08C",1,"S08X",0.,0.,kNomexBWidth/2.,0,"ONLY"); |
| 842 | |
| 843 | // position the PCB volume inside the insulating material volume |
| 844 | gMC->Gspos("S07P",1,"S07I",0.,0.,0.,0,"ONLY"); |
| 845 | gMC->Gspos("S08P",1,"S08I",0.,0.,0.,0,"ONLY"); |
| 846 | |
| 847 | // position the horizontal frame volume inside the PCB volume |
| 848 | gMC->Gspos("S07H",1,"S07P",0.,0.,0.,0,"ONLY"); |
| 849 | gMC->Gspos("S08H",1,"S08P",0.,0.,0.,0,"ONLY"); |
| 850 | |
| 851 | // position the sensitive volume inside the horizontal frame volume |
| 852 | gMC->Gsposp("S07G",1,"S07H",0.,0.,0.,0,"ONLY",senspar,3); |
| 853 | gMC->Gsposp("S08G",1,"S08H",0.,0.,0.,0,"ONLY",senspar,3); |
| 854 | |
| 855 | // position the border volumes inside the PCB volume |
| 856 | Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.; |
| 857 | gMC->Gspos("S07B",1,"S07P",0., yborder,0.,0,"ONLY"); |
| 858 | gMC->Gspos("S07B",2,"S07P",0.,-yborder,0.,0,"ONLY"); |
| 859 | gMC->Gspos("S08B",1,"S08P",0., yborder,0.,0,"ONLY"); |
| 860 | gMC->Gspos("S08B",2,"S08P",0.,-yborder,0.,0,"ONLY"); |
| 861 | |
| 862 | // create the NULOC volume and position it in the horizontal frame |
| 863 | |
| 864 | gMC->Gsvolu("S07E","BOX",kNulocMaterial,nulocpar,3); |
| 865 | gMC->Gsvolu("S08E","BOX",kNulocMaterial,nulocpar,3); |
| 866 | index = 0; |
| 867 | for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) { |
| 868 | index++; |
| 869 | gMC->Gspos("S07E",2*index-1,"S07B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); |
| 870 | gMC->Gspos("S07E",2*index ,"S07B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY"); |
| 871 | gMC->Gspos("S08E",2*index-1,"S08B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); |
| 872 | gMC->Gspos("S08E",2*index ,"S08B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY"); |
| 873 | } |
| 874 | |
| 875 | // position the volumes approximating the circular section of the pipe |
| 876 | |
| 877 | Float_t epsilon = 0.001; |
| 878 | Int_t ndiv = 10; |
| 879 | Int_t imax = 1; |
| 880 | Double_t divpar[3]; |
| 881 | Double_t dydiv = kSensHeight/ndiv; |
| 882 | Double_t ydiv = (kSensHeight - dydiv)/2.; |
| f4a7360f |
883 | Float_t rmin = iChamber1->RInner(); // Same radius for both chamber of St4 |
| e516b01d |
884 | Float_t xdiv = 0.; |
| 885 | Float_t xvol; |
| 886 | Float_t yvol; |
| 887 | |
| 888 | for (Int_t idiv = 0; idiv < ndiv; idiv++){ |
| 889 | ydiv += dydiv; |
| 890 | xdiv = 0.; |
| 6f7aa53f |
891 | if (ydiv < rmin) xdiv = rmin * TMath::Sin( TMath::ACos((ydiv-dydiv/2.)/rmin) ); |
| e516b01d |
892 | divpar[0] = (kPcbLength - xdiv)/2.; |
| 893 | divpar[1] = dydiv/2. - epsilon; |
| 894 | divpar[2] = kSensWidth/2.; |
| 895 | xvol = (kPcbLength + xdiv)/2.; |
| 896 | yvol = ydiv ; |
| 6296ba34 |
897 | |
| e516b01d |
898 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
| 899 | sprintf(idSlatCh7,"LC%d",ConvertSlatNum(1,quadrant,kNslats4-1)); |
| 900 | sprintf(idSlatCh8,"LD%d",ConvertSlatNum(1,quadrant,kNslats4-1)); |
| 6296ba34 |
901 | |
| e516b01d |
902 | GetEnvelopes(6)->AddEnvelopeConstituentParam("S07G",idSlatCh7, quadrant*100+imax+4*idiv+1, |
| 903 | TGeoTranslation(xvol-kPcbLength * kNPCB4[1]/2.,yvol-kPcbLength,0.),3,divpar); |
| 6296ba34 |
904 | |
| e516b01d |
905 | GetEnvelopes(7)->AddEnvelopeConstituentParam("S08G", idSlatCh8, quadrant*100+imax+4*idiv+1, |
| 906 | TGeoTranslation(xvol-kPcbLength * kNPCB4[1]/2.,yvol-kPcbLength,0.),3,divpar); |
| 907 | } |
| d12a7158 |
908 | } |
| e516b01d |
909 | // cout << "Geometry for Station 4...... done" << endl; |
| 910 | |
| 911 | } |
| d1cd2474 |
912 | |
| e516b01d |
913 | if (fStations[4]) { |
| 6296ba34 |
914 | |
| d1cd2474 |
915 | |
| e516b01d |
916 | // //******************************************************************** |
| 917 | // // Station 5 ** |
| 918 | // //******************************************************************** |
| 919 | // // indices 1 and 2 for first and second chambers in the station |
| 920 | // // iChamber (first chamber) kept for other quanties than Z, |
| 921 | // // assumed to be the same in both chambers |
| 922 | // corrected geometry (JP. Cussonneau, Ch. Finck) |
| 923 | |
| e118b27e |
924 | iChamber = &fMUON->Chamber(8); |
| e516b01d |
925 | iChamber1 = iChamber; |
| e118b27e |
926 | iChamber2 = &fMUON->Chamber(9); |
| d1cd2474 |
927 | |
| e516b01d |
928 | const Int_t kNslats5 = 7; // number of slats per quadrant |
| 929 | const Int_t kNPCB5[kNslats5] = {5, 6, 6, 6, 5, 4, 3}; // n PCB per slat |
| 930 | const Float_t kXpos5[kNslats5] = {38.2, 0., 0., 0., 0., 0., 0.}; |
| 931 | const Float_t kYpos5[kNslats5] = {0., 38.2, 37.9, 37.6, 37.3, 37.05, 36.75}; |
| 932 | Float_t slatLength5[kNslats5]; |
| 933 | |
| 6ffd4cb7 |
934 | // Mother volume for each chamber |
| 935 | // Outer excess and inner recess for mother volume radius |
| 936 | // with respect to ROuter and RInner |
| f4a7360f |
937 | Float_t dframep_in = kRframeHeight; |
| 938 | Float_t dframep_out= kVframeLength + 40.0; // Additional 40 cm gap is needed to wrap the corners of the slats |
| 6ffd4cb7 |
939 | Float_t tpar[3]; |
| 940 | Double_t dstation = ( (-iChamber2->Z()) - (-iChamber1->Z()) ) /2.3; |
| 941 | tpar[0] = iChamber1->RInner()-dframep_in; |
| 942 | tpar[1] = (iChamber1->ROuter()+dframep_out); |
| 943 | tpar[2] = dstation; |
| 944 | gMC->Gsvolu("CH09", "TUBE", idAir, tpar, 3); |
| 945 | gMC->Gsvolu("CH10", "TUBE", idAir, tpar, 3); |
| 946 | iChamber1->GetGeometry()->SetVolume("CH09"); |
| 947 | iChamber2->GetGeometry()->SetVolume("CH10"); |
| 948 | |
| e516b01d |
949 | // create and position the slat (mother) volumes |
| 950 | |
| 951 | char idSlatCh9[5]; |
| 952 | char idSlatCh10[5]; |
| 953 | Float_t xSlat5; |
| 954 | Float_t ySlat5 = 0; |
| 955 | angle = 0.; |
| 956 | |
| 957 | for (i = 0; i < kNslats5; i++){ |
| 958 | |
| 959 | slatLength5[i] = kPcbLength * kNPCB5[i] + 2.* kVframeLength; |
| 960 | xSlat5 = slatLength5[i]/2. + kDslatLength + kXpos5[i]; |
| 961 | ySlat5 += kYpos5[i]; |
| 962 | |
| 963 | spar[0] = slatLength5[i]/2.; |
| 964 | spar[1] = kSlatHeight/2.; |
| 965 | spar[2] = kSlatWidth/2.; |
| 966 | |
| 967 | Float_t dzCh5 = dzCh; |
| 968 | Float_t zSlat5 = (i%2 ==0)? -zSlat : zSlat; |
| 969 | |
| 970 | sprintf(idSlatCh9,"LE%d",kNslats5-1+i); |
| e856ab99 |
971 | detElemId = 913 - (i + kNslats5-1-6); |
| e516b01d |
972 | gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3); |
| 973 | GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5), |
| 974 | TGeoRotation("rot1",90,angle,90,90+angle,0,0) ); |
| 975 | |
| 976 | sprintf(idSlatCh9,"LE%d",3*kNslats5-2+i); |
| e856ab99 |
977 | detElemId = 900 + (i + kNslats5-1-6); |
| e516b01d |
978 | gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3); |
| 979 | GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5), |
| 980 | TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) ); |
| d1cd2474 |
981 | |
| e516b01d |
982 | if (i > 0) { |
| 983 | sprintf(idSlatCh9,"LE%d",kNslats5-1-i); |
| e856ab99 |
984 | detElemId = 913 + (i + kNslats5-1-6); |
| e516b01d |
985 | gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3); |
| 986 | GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5), |
| 987 | TGeoRotation("rot3",90,angle,90,270+angle,180,0) ); |
| 988 | |
| 989 | sprintf(idSlatCh9,"LE%d",3*kNslats5-2-i); |
| e856ab99 |
990 | detElemId = 926 - (i + kNslats5-1-6); |
| e516b01d |
991 | gMC->Gsvolu(idSlatCh9,"BOX",kSlatMaterial,spar,3); |
| 992 | GetEnvelopes(8)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5), |
| 993 | TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) ); |
| 994 | } |
| 995 | |
| 996 | sprintf(idSlatCh10,"LF%d",kNslats5-1+i); |
| e856ab99 |
997 | detElemId = 1013 - (i + kNslats5-1-6); |
| e516b01d |
998 | gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3); |
| 999 | GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5), |
| 1000 | TGeoRotation("rot5",90,angle,90,90+angle,0,0) ); |
| 1001 | |
| 1002 | sprintf(idSlatCh10,"LF%d",3*kNslats5-2+i); |
| e856ab99 |
1003 | detElemId = 1000 + (i + kNslats5-1-6); |
| e516b01d |
1004 | gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3); |
| 1005 | GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5), |
| 1006 | TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) ); |
| 1007 | |
| 1008 | if (i > 0) { |
| 1009 | sprintf(idSlatCh10,"LF%d",kNslats5-1-i); |
| e856ab99 |
1010 | detElemId = 1013 + (i + kNslats5-1-6); |
| e516b01d |
1011 | gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3); |
| 1012 | GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5), |
| 1013 | TGeoRotation("rot7",90,angle,90,270+angle,180,0) ); |
| 1014 | sprintf(idSlatCh10,"LF%d",3*kNslats5-2-i); |
| e856ab99 |
1015 | detElemId = 1026 - (i + kNslats5-1-6); |
| e516b01d |
1016 | gMC->Gsvolu(idSlatCh10,"BOX",kSlatMaterial,spar,3); |
| 1017 | GetEnvelopes(9)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5), |
| 1018 | TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) ); |
| 1019 | } |
| 1020 | } |
| 1021 | |
| 1022 | // create the panel volume |
| d12a7158 |
1023 | |
| e516b01d |
1024 | gMC->Gsvolu("S09C","BOX",kCarbonMaterial,panelpar,3); |
| 1025 | gMC->Gsvolu("S10C","BOX",kCarbonMaterial,panelpar,3); |
| 1026 | |
| 1027 | // create the nomex volume |
| 1028 | |
| 1029 | gMC->Gsvolu("S09N","BOX",kNomexMaterial,nomexpar,3); |
| 1030 | gMC->Gsvolu("S10N","BOX",kNomexMaterial,nomexpar,3); |
| d1cd2474 |
1031 | |
| d1cd2474 |
1032 | |
| e516b01d |
1033 | // create the nomex volume (bulk) |
| d1cd2474 |
1034 | |
| e516b01d |
1035 | gMC->Gsvolu("S09X","BOX",kNomexBMaterial,nomexbpar,3); |
| 1036 | gMC->Gsvolu("S10X","BOX",kNomexBMaterial,nomexbpar,3); |
| d1cd2474 |
1037 | |
| e516b01d |
1038 | // create the insulating material volume |
| d1cd2474 |
1039 | |
| e516b01d |
1040 | gMC->Gsvolu("S09I","BOX",kInsuMaterial,insupar,3); |
| 1041 | gMC->Gsvolu("S10I","BOX",kInsuMaterial,insupar,3); |
| c3b69531 |
1042 | |
| e516b01d |
1043 | // create the PCB volume |
| 1044 | |
| 1045 | gMC->Gsvolu("S09P","BOX",kPcbMaterial,pcbpar,3); |
| 1046 | gMC->Gsvolu("S10P","BOX",kPcbMaterial,pcbpar,3); |
| d1cd2474 |
1047 | |
| e516b01d |
1048 | // create the sensitive volumes, |
| 1049 | |
| 1050 | gMC->Gsvolu("S09G","BOX",kSensMaterial,dum,0); |
| 1051 | gMC->Gsvolu("S10G","BOX",kSensMaterial,dum,0); |
| 1052 | |
| 1053 | // create the vertical frame volume |
| 1054 | |
| 1055 | gMC->Gsvolu("S09V","BOX",kVframeMaterial,vFramepar,3); |
| 1056 | gMC->Gsvolu("S10V","BOX",kVframeMaterial,vFramepar,3); |
| 1057 | |
| 1058 | // create the horizontal frame volume |
| 1059 | |
| 1060 | gMC->Gsvolu("S09H","BOX",kHframeMaterial,hFramepar,3); |
| 1061 | gMC->Gsvolu("S10H","BOX",kHframeMaterial,hFramepar,3); |
| 1062 | |
| 1063 | // create the horizontal border volume |
| 1064 | |
| 1065 | gMC->Gsvolu("S09B","BOX",kBframeMaterial,bFramepar,3); |
| 1066 | gMC->Gsvolu("S10B","BOX",kBframeMaterial,bFramepar,3); |
| 1067 | |
| 1068 | index = 0; |
| 1069 | for (i = 0; i < kNslats5; i++){ |
| 1070 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
| 1071 | |
| 1072 | if (i == 0 && quadrant == 2) continue; |
| 1073 | if (i == 0 && quadrant == 4) continue; |
| 1074 | |
| 1075 | sprintf(idSlatCh9,"LE%d",ConvertSlatNum(i,quadrant,kNslats5-1)); |
| 1076 | sprintf(idSlatCh10,"LF%d",ConvertSlatNum(i,quadrant,kNslats5-1)); |
| 1077 | Float_t xvFrame = (slatLength5[i] - kVframeLength)/2.; // ok |
| 1078 | |
| 1079 | // position the vertical frames (spacers) |
| 1080 | if (i != 1) { |
| 1081 | GetEnvelopes(8)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 1082 | GetEnvelopes(8)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 1083 | GetEnvelopes(9)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 1084 | GetEnvelopes(9)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 1085 | } else { // no rounded spacer yet |
| 1086 | GetEnvelopes(8)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 1087 | // GetEnvelopes(8)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 1088 | GetEnvelopes(9)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.)); |
| 1089 | // GetEnvelopes(9)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.)); |
| 1090 | } |
| 1091 | |
| 1092 | // position the panels and the insulating material |
| 1093 | for (j = 0; j < kNPCB5[i]; j++){ |
| 1094 | if (i == 1 && j == 0) continue; |
| 1095 | index++; |
| 1096 | Float_t xx = kSensLength * (-kNPCB5[i]/2.+j+.5); |
| 1097 | |
| 1098 | Float_t zPanel = spar[2] - nomexbpar[2]; |
| 1099 | GetEnvelopes(8)->AddEnvelopeConstituent("S09X", idSlatCh9, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
| 1100 | GetEnvelopes(8)->AddEnvelopeConstituent("S09X", idSlatCh9, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
| 1101 | GetEnvelopes(8)->AddEnvelopeConstituent("S09I", idSlatCh9, index,TGeoTranslation(xx,0.,0.)); |
| 1102 | |
| 1103 | GetEnvelopes(9)->AddEnvelopeConstituent("S10X", idSlatCh10, 2*index-1,TGeoTranslation(xx,0.,zPanel)); |
| 1104 | GetEnvelopes(9)->AddEnvelopeConstituent("S10X", idSlatCh10, 2*index,TGeoTranslation(xx,0.,-zPanel)); |
| 1105 | GetEnvelopes(9)->AddEnvelopeConstituent("S10I", idSlatCh10, index,TGeoTranslation(xx,0.,0.)); |
| 1106 | } |
| 1107 | } |
| 1108 | } |
| 1109 | |
| 1110 | // position the nomex volume inside the panel volume |
| 1111 | gMC->Gspos("S09N",1,"S09C",0.,0.,0.,0,"ONLY"); |
| 1112 | gMC->Gspos("S10N",1,"S10C",0.,0.,0.,0,"ONLY"); |
| 1113 | |
| 1114 | // position panel volume inside the bulk nomex material volume |
| 1115 | gMC->Gspos("S09C",1,"S09X",0.,0.,kNomexBWidth/2.,0,"ONLY"); |
| 1116 | gMC->Gspos("S10C",1,"S10X",0.,0.,kNomexBWidth/2.,0,"ONLY"); |
| 1117 | |
| 1118 | // position the PCB volume inside the insulating material volume |
| 1119 | gMC->Gspos("S09P",1,"S09I",0.,0.,0.,0,"ONLY"); |
| 1120 | gMC->Gspos("S10P",1,"S10I",0.,0.,0.,0,"ONLY"); |
| 1121 | |
| 1122 | // position the horizontal frame volume inside the PCB volume |
| 1123 | gMC->Gspos("S09H",1,"S09P",0.,0.,0.,0,"ONLY"); |
| 1124 | gMC->Gspos("S10H",1,"S10P",0.,0.,0.,0,"ONLY"); |
| 1125 | |
| 1126 | // position the sensitive volume inside the horizontal frame volume |
| 1127 | gMC->Gsposp("S09G",1,"S09H",0.,0.,0.,0,"ONLY",senspar,3); |
| 1128 | gMC->Gsposp("S10G",1,"S10H",0.,0.,0.,0,"ONLY",senspar,3); |
| 1129 | |
| 1130 | // position the border volumes inside the PCB volume |
| 1131 | Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.; |
| 1132 | gMC->Gspos("S09B",1,"S09P",0., yborder,0.,0,"ONLY"); |
| 1133 | gMC->Gspos("S09B",2,"S09P",0.,-yborder,0.,0,"ONLY"); |
| 1134 | gMC->Gspos("S10B",1,"S10P",0., yborder,0.,0,"ONLY"); |
| 1135 | gMC->Gspos("S10B",2,"S10P",0.,-yborder,0.,0,"ONLY"); |
| 1136 | |
| 1137 | // // create the NULOC volume and position it in the horizontal frame |
| 1138 | |
| 1139 | gMC->Gsvolu("S09E","BOX",kNulocMaterial,nulocpar,3); |
| 1140 | gMC->Gsvolu("S10E","BOX",kNulocMaterial,nulocpar,3); |
| 1141 | index = 0; |
| 1142 | for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) { |
| 1143 | index++; |
| 1144 | gMC->Gspos("S09E",2*index-1,"S09B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); |
| 1145 | gMC->Gspos("S09E",2*index ,"S09B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY"); |
| 1146 | gMC->Gspos("S10E",2*index-1,"S10B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY"); |
| 1147 | gMC->Gspos("S10E",2*index ,"S10B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY"); |
| 1148 | } |
| 1149 | |
| d1cd2474 |
1150 | |
| e516b01d |
1151 | // position the volumes approximating the circular section of the pipe |
| 1152 | Float_t epsilon = 0.001; |
| 1153 | Int_t ndiv = 10; |
| 1154 | Int_t imax = 1; |
| 1155 | Double_t divpar[3]; |
| 1156 | Double_t dydiv = kSensHeight/ndiv; |
| 1157 | Double_t ydiv = (kSensHeight - dydiv)/2.; |
| f4a7360f |
1158 | Float_t rmin = iChamber1->RInner(); |
| e516b01d |
1159 | Float_t xdiv = 0.; |
| 1160 | Float_t xvol; |
| 1161 | Float_t yvol; |
| 1162 | |
| 1163 | for (Int_t idiv = 0; idiv < ndiv; idiv++){ |
| 1164 | ydiv += dydiv; |
| 1165 | xdiv = 0.; |
| 6f7aa53f |
1166 | if (ydiv < rmin) xdiv = rmin * TMath::Sin( TMath::ACos((ydiv-dydiv/2.)/rmin) ); |
| e516b01d |
1167 | divpar[0] = (kPcbLength - xdiv)/2.; |
| 1168 | divpar[1] = dydiv/2. - epsilon; |
| 1169 | divpar[2] = kSensWidth/2.; |
| 1170 | xvol = (kPcbLength + xdiv)/2.; |
| 1171 | yvol = ydiv; |
| 1172 | |
| 1173 | for (Int_t quadrant = 1; quadrant <= 4; quadrant++) { |
| 1174 | sprintf(idSlatCh9,"LE%d",ConvertSlatNum(1,quadrant,kNslats5-1)); |
| 1175 | sprintf(idSlatCh10,"LF%d",ConvertSlatNum(1,quadrant,kNslats5-1)); |
| 1176 | |
| 1177 | GetEnvelopes(8)->AddEnvelopeConstituentParam("S09G", idSlatCh9, quadrant*100+imax+4*idiv+1, |
| 1178 | TGeoTranslation(xvol-kPcbLength * kNPCB5[1]/2.,yvol-kPcbLength,0.),3,divpar); |
| 1179 | GetEnvelopes(9)->AddEnvelopeConstituentParam("S10G", idSlatCh10, quadrant*100+imax+4*idiv+1, |
| 1180 | TGeoTranslation(xvol-kPcbLength * kNPCB5[1]/2.,yvol-kPcbLength,0.),3,divpar); |
| 1181 | } |
| d1cd2474 |
1182 | } |
| e516b01d |
1183 | // cout << "Geometry for Station 5...... done" << endl; |
| 1184 | |
| 1185 | } |
| d1cd2474 |
1186 | } |
| 1187 | |
| 1188 | |
| 1189 | //______________________________________________________________________________ |
| 1190 | void AliMUONSlatGeometryBuilder::SetTransformations() |
| 1191 | { |
| 1192 | // Defines the transformations for the station2 chambers. |
| 1193 | // --- |
| 1194 | |
| e118b27e |
1195 | AliMUONChamber* iChamber1 = &fMUON->Chamber(4); |
| d1cd2474 |
1196 | Double_t zpos1 = - iChamber1->Z(); |
| 1197 | iChamber1->GetGeometry() |
| 1198 | ->SetTranslation(TGeoTranslation(0., 0., zpos1)); |
| 1199 | |
| e118b27e |
1200 | AliMUONChamber* iChamber2 = &fMUON->Chamber(5); |
| d1cd2474 |
1201 | Double_t zpos2 = - iChamber2->Z(); |
| 1202 | iChamber2->GetGeometry() |
| 1203 | ->SetTranslation(TGeoTranslation(0., 0., zpos2)); |
| 1204 | |
| e118b27e |
1205 | iChamber1 = &fMUON->Chamber(6); |
| d1cd2474 |
1206 | zpos1 = - iChamber1->Z(); |
| 1207 | iChamber1->GetGeometry() |
| 1208 | ->SetTranslation(TGeoTranslation(0., 0., zpos1)); |
| 1209 | |
| e118b27e |
1210 | iChamber2 = &fMUON->Chamber(7); |
| d1cd2474 |
1211 | zpos2 = - iChamber2->Z(); |
| 1212 | iChamber2->GetGeometry() |
| 1213 | ->SetTranslation(TGeoTranslation(0., 0., zpos2)); |
| 1214 | |
| e118b27e |
1215 | iChamber1 = &fMUON->Chamber(8); |
| d1cd2474 |
1216 | zpos1 = - iChamber1->Z(); |
| 1217 | iChamber1->GetGeometry() |
| 1218 | ->SetTranslation(TGeoTranslation(0., 0., zpos1)); |
| 1219 | |
| e118b27e |
1220 | iChamber2 = &fMUON->Chamber(9); |
| d1cd2474 |
1221 | zpos2 = - iChamber2->Z(); |
| 1222 | iChamber2->GetGeometry() |
| 1223 | ->SetTranslation(TGeoTranslation(0., 0., zpos2)); |
| 1224 | |
| 1225 | } |
| 1226 | |
| 1227 | //______________________________________________________________________________ |
| 1228 | void AliMUONSlatGeometryBuilder::SetSensitiveVolumes() |
| 1229 | { |
| 1230 | // Defines the sensitive volumes for slat stations chambers. |
| 1231 | // --- |
| 1232 | |
| e118b27e |
1233 | GetGeometry(4)->SetSensitiveVolume("S05G"); |
| 1234 | GetGeometry(5)->SetSensitiveVolume("S06G"); |
| 1235 | GetGeometry(6)->SetSensitiveVolume("S07G"); |
| 1236 | GetGeometry(7)->SetSensitiveVolume("S08G"); |
| 1237 | GetGeometry(8)->SetSensitiveVolume("S09G"); |
| 1238 | GetGeometry(9)->SetSensitiveVolume("S10G"); |
| d1cd2474 |
1239 | } |
| 1240 | |
| 1241 | //______________________________________________________________________________ |
| 1242 | Int_t AliMUONSlatGeometryBuilder::ConvertSlatNum(Int_t numslat, Int_t quadnum, Int_t fspq) const |
| 1243 | { |
| 2057e0cc |
1244 | // On-line function establishing the correspondance between numslat (the slat number on a particular quadrant (numslat->0....4 for St3)) |
| 1245 | // and slatnum (the slat number on the whole panel (slatnum->1...18 for St3) |
| c10e6eaf |
1246 | numslat += 1; |
| 1247 | if (quadnum==2 || quadnum==3) |
| 1248 | numslat += fspq; |
| 1249 | else |
| 1250 | numslat = fspq + 2-numslat; |
| 1251 | numslat -= 1; |
| d1cd2474 |
1252 | |
| c10e6eaf |
1253 | if (quadnum==3 || quadnum==4) numslat += 2*fspq+1; |
| 1254 | |
| 1255 | return numslat; |
| d1cd2474 |
1256 | } |
git://git.uio.no / u / mrichter / AliRoot.git / blame