]>
Commit | Line | Data |
---|---|---|
dfef1a15 | 1 | /************************************************************************** |
2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * | |
3 | * * | |
4 | * Author: The ALICE Off-line Project. * | |
5 | * Contributors are mentioned in the code where appropriate. * | |
6 | * * | |
7 | * Permission to use, copy, modify and distribute this software and its * | |
8 | * documentation strictly for non-commercial purposes is hereby granted * | |
9 | * without fee, provided that the above copyright notice appears in all * | |
10 | * copies and that both the copyright notice and this permission notice * | |
11 | * appear in the supporting documentation. The authors make no claims * | |
12 | * about the suitability of this software for any purpose. It is * | |
13 | * provided "as is" without express or implied warranty. * | |
14 | **************************************************************************/ | |
15 | ||
16 | /* | |
17 | $Log$ | |
e6add757 | 18 | Revision 1.4 2007/05/29 16:51:05 decaro |
19 | Update of the front-end electronics and cooling system description | |
20 | ||
9f8488c2 | 21 | Revision 1.3.2 2007/05/29 decaro |
22 | FEA+cooling zone description: update | |
23 | FEA+cooling orientation (side A/ side C) -> correction | |
24 | Revision 1.3.1 2007/05/24 decaro | |
25 | Change the FEA+cooling zone description: | |
26 | - FCA1/FCA2, air boxes, contain: | |
27 | FFEA volume, G10 box, | |
28 | FAL1/FAL2/FAL3 volumes, aluminium boxes; | |
29 | - FRO1/FRO2/FRO3/FRO4/FBAR, aluminum boxes; | |
30 | - changed FTUB positions; | |
31 | ||
32 | Revision 1.3 2007/05/04 14:05:42 decaro | |
33 | Ineffective comment cleanup | |
34 | ||
e41ca6a9 | 35 | Revision 1.2 2007/05/04 12:59:22 arcelli |
36 | Change the TOF SM paths for misalignment (one layer up) | |
37 | ||
6e2570fc | 38 | Revision 1.1 2007/05/02 17:32:58 decaro |
39 | TOF geometry description as installed (G. Cara Romeo, A. De Caro) | |
40 | ||
dfef1a15 | 41 | Revision 0.1 2007 March G. Cara Romeo and A. De Caro |
42 | Implemented a more realistic TOF geometry description, | |
43 | in terms of: | |
44 | - material badget, | |
45 | - services and front end electronics description, | |
46 | - TOF crate readout modules | |
47 | (added volume FTOS in ALIC_1/BBMO_1/BBCE_%i -for i=1,...,18-, | |
48 | and in ALIC_1/BFMO_%i -for i=19,...,36- volumes) | |
49 | As the 5th version in terms of geometrical positioning of volumes. | |
50 | ||
51 | */ | |
52 | ||
53 | /////////////////////////////////////////////////////////////////////////////// | |
54 | // // | |
55 | // This class contains the functions for version 6 of the Time Of Flight // | |
56 | // detector. // | |
57 | // // | |
58 | // VERSION WITH 6 MODULES AND TILTED STRIPS // | |
59 | // // | |
60 | // FULL COVERAGE VERSION + OPTION for PHOS holes // | |
61 | // // | |
62 | // // | |
63 | //Begin_Html // | |
64 | /* // | |
65 | <img src="picts/AliTOFv6T0Class.gif"> // | |
66 | */ // | |
67 | //End_Html // | |
68 | // // | |
69 | /////////////////////////////////////////////////////////////////////////////// | |
70 | ||
71 | #include "TBRIK.h" | |
72 | #include "TGeometry.h" | |
73 | #include "TLorentzVector.h" | |
74 | #include "TNode.h" | |
75 | #include "TVirtualMC.h" | |
76 | #include "TGeoManager.h" | |
77 | ||
78 | #include "AliConst.h" | |
79 | #include "AliLog.h" | |
80 | #include "AliMagF.h" | |
81 | #include "AliMC.h" | |
82 | #include "AliRun.h" | |
e6add757 | 83 | #include "AliTrackReference.h" |
dfef1a15 | 84 | |
85 | #include "AliTOFGeometry.h" | |
86 | #include "AliTOFGeometryV5.h" | |
87 | #include "AliTOFv6T0.h" | |
88 | ||
89 | extern TDirectory *gDirectory; | |
90 | extern TVirtualMC *gMC; | |
91 | extern TGeoManager *gGeoManager; | |
92 | ||
93 | extern AliRun *gAlice; | |
94 | ||
95 | ClassImp(AliTOFv6T0) | |
96 | ||
97 | //_____________________________________________________________________________ | |
98 | AliTOFv6T0::AliTOFv6T0(): | |
99 | fIdFTOA(-1), | |
100 | fIdFTOB(-1), | |
101 | fIdFTOC(-1), | |
102 | fIdFLTA(-1), | |
103 | fIdFLTB(-1), | |
104 | fIdFLTC(-1), | |
105 | fTOFHoles(kFALSE) | |
106 | { | |
107 | // | |
108 | // Default constructor | |
109 | // | |
110 | } | |
111 | ||
112 | //_____________________________________________________________________________ | |
113 | AliTOFv6T0::AliTOFv6T0(const char *name, const char *title): | |
114 | AliTOF(name,title,"tzero"), | |
115 | fIdFTOA(-1), | |
116 | fIdFTOB(-1), | |
117 | fIdFTOC(-1), | |
118 | fIdFLTA(-1), | |
119 | fIdFLTB(-1), | |
120 | fIdFLTC(-1), | |
121 | fTOFHoles(kFALSE) | |
122 | { | |
123 | // | |
124 | // Standard constructor | |
125 | // | |
126 | // | |
127 | // Check that FRAME is there otherwise we have no place where to | |
128 | // put TOF | |
129 | ||
130 | ||
131 | AliModule* frame = (AliModule*)gAlice->GetModule("FRAME"); | |
132 | if(!frame) { | |
133 | AliFatal("TOF needs FRAME to be present"); | |
134 | } else{ | |
135 | ||
136 | if (fTOFGeometry) delete fTOFGeometry; | |
137 | fTOFGeometry = new AliTOFGeometryV5(); | |
138 | ||
139 | if(frame->IsVersion()==1) { | |
140 | AliDebug(1,Form("Frame version %d", frame->IsVersion())); | |
141 | AliDebug(1,"Full Coverage for TOF"); | |
142 | fTOFHoles=false;} | |
143 | else { | |
144 | AliDebug(1,Form("Frame version %d", frame->IsVersion())); | |
145 | AliDebug(1,"TOF with Holes for PHOS"); | |
146 | fTOFHoles=true;} | |
147 | } | |
148 | fTOFGeometry->SetHoles(fTOFHoles); | |
149 | ||
150 | //AliTOF::fTOFGeometry = fTOFGeometry; | |
151 | ||
152 | // Save the geometry | |
153 | TDirectory* saveDir = gDirectory; | |
154 | gAlice->GetRunLoader()->CdGAFile(); | |
155 | fTOFGeometry->Write("TOFgeometry"); | |
156 | saveDir->cd(); | |
157 | ||
158 | } | |
159 | ||
160 | //_____________________________________________________________________________ | |
161 | void AliTOFv6T0::AddAlignableVolumes() const | |
162 | { | |
163 | // | |
164 | // Create entries for alignable volumes associating the symbolic volume | |
165 | // name with the corresponding volume path. Needs to be syncronized with | |
166 | // eventual changes in the geometry. | |
167 | // | |
168 | ||
169 | TString volPath; | |
170 | TString symName; | |
171 | ||
172 | TString vpL0 = "ALIC_1/B077_1/BSEGMO"; | |
173 | TString vpL1 = "_1/BTOF"; | |
174 | TString vpL2 = "_1"; | |
175 | TString vpL3 = "/FTOA_0"; | |
176 | TString vpL4 = "/FLTA_0/FSTR_"; | |
177 | ||
178 | TString snSM = "TOF/sm"; | |
179 | TString snSTRIP = "/strip"; | |
180 | ||
181 | Int_t nSectors=fTOFGeometry->NSectors(); | |
182 | Int_t nStrips =fTOFGeometry->NStripA()+ | |
183 | 2*fTOFGeometry->NStripB()+ | |
184 | 2*fTOFGeometry->NStripC(); | |
185 | ||
186 | // | |
187 | // The TOF MRPC Strips | |
188 | // The symbolic names are: TOF/sm00/strip01 | |
189 | // ... | |
190 | // TOF/sm17/strip91 | |
191 | ||
192 | Int_t imod=0; | |
193 | ||
194 | for (Int_t isect = 0; isect < nSectors; isect++) { | |
195 | for (Int_t istr = 1; istr <= nStrips; istr++) { | |
196 | ||
197 | volPath = vpL0; | |
198 | volPath += isect; | |
199 | volPath += vpL1; | |
200 | volPath += isect; | |
201 | volPath += vpL2; | |
202 | volPath += vpL3; | |
203 | volPath += vpL4; | |
204 | volPath += istr; | |
205 | ||
206 | ||
207 | symName = snSM; | |
208 | symName += Form("%02d",isect); | |
209 | symName += snSTRIP; | |
210 | symName += Form("%02d",istr); | |
211 | ||
212 | AliDebug(2,"--------------------------------------------"); | |
213 | AliDebug(2,Form("Alignable object %d", imod)); | |
214 | AliDebug(2,Form("volPath=%s\n",volPath.Data())); | |
215 | AliDebug(2,Form("symName=%s\n",symName.Data())); | |
216 | AliDebug(2,"--------------------------------------------"); | |
217 | ||
218 | gGeoManager->SetAlignableEntry(symName.Data(),volPath.Data()); | |
219 | imod++; | |
220 | } | |
221 | } | |
222 | ||
223 | ||
224 | // | |
225 | // The TOF supermodules | |
226 | // The symbolic names are: TOF/sm00 | |
227 | // ... | |
228 | // TOF/sm17 | |
229 | // | |
230 | for (Int_t isect = 0; isect < nSectors; isect++) { | |
231 | ||
232 | volPath = vpL0; | |
233 | volPath += isect; | |
234 | volPath += vpL1; | |
235 | volPath += isect; | |
236 | volPath += vpL2; | |
dfef1a15 | 237 | |
238 | symName = snSM; | |
239 | symName += Form("%02d",isect); | |
240 | ||
241 | AliDebug(2,"--------------------------------------------"); | |
242 | AliDebug(2,Form("Alignable object %d", isect+imod)); | |
243 | AliDebug(2,Form("volPath=%s\n",volPath.Data())); | |
244 | AliDebug(2,Form("symName=%s\n",symName.Data())); | |
245 | AliDebug(2,"--------------------------------------------"); | |
246 | ||
247 | gGeoManager->SetAlignableEntry(symName.Data(),volPath.Data()); | |
248 | ||
249 | } | |
250 | ||
251 | } | |
252 | //____________________________________________________________________________ | |
253 | void AliTOFv6T0::BuildGeometry() | |
254 | { | |
255 | // | |
256 | // Build TOF ROOT geometry for the ALICE event display | |
257 | // | |
258 | TNode *node, *top; | |
259 | const int kColorTOF = 27; | |
260 | ||
261 | TGeometry *globalGeometry = (TGeometry*)gAlice->GetGeometry(); | |
262 | ||
263 | // Find top TNODE | |
264 | top = globalGeometry->GetNode("alice"); | |
265 | ||
266 | // Position the different copies | |
267 | const Float_t krTof =(fTOFGeometry->Rmax()+fTOFGeometry->Rmin())/2.; | |
268 | const Float_t khTof = fTOFGeometry->Rmax()-fTOFGeometry->Rmin(); | |
269 | const Int_t kNTof = fTOFGeometry->NSectors(); | |
270 | const Float_t kangle = k2PI/kNTof; | |
271 | ||
272 | const Float_t kInterCentrModBorder1 = 49.5; | |
273 | const Float_t kInterCentrModBorder2 = 57.5; | |
274 | ||
275 | Float_t ang; | |
276 | ||
277 | // define offset for nodes | |
278 | Float_t zOffsetB = (fTOFGeometry->ZlenA()*0.5 + (kInterCentrModBorder1+kInterCentrModBorder2)*0.5)*0.5; | |
279 | Float_t zOffsetA = 0.; | |
280 | // Define TOF basic volume | |
281 | ||
282 | char nodeName0[16], nodeName1[16], nodeName2[16]; | |
283 | char nodeName3[16], nodeName4[16], rotMatNum[16]; | |
284 | ||
285 | if (fTOFHoles) { | |
286 | new TBRIK("S_TOF_B","TOF box","void", | |
287 | fTOFGeometry->StripLength()*0.5, khTof*0.5, fTOFGeometry->ZlenB()*0.5); | |
288 | new TBRIK("S_TOF_C","TOF box","void", | |
289 | fTOFGeometry->StripLength()*0.5, khTof*0.5, fTOFGeometry->ZlenB()*0.5); | |
290 | } | |
291 | new TBRIK("S_TOF_A","TOF box","void", | |
292 | fTOFGeometry->StripLength()*0.5, khTof*0.5, fTOFGeometry->ZlenA()*0.5); | |
293 | ||
294 | for (Int_t nodeNum=1;nodeNum<kNTof+1;nodeNum++){ | |
295 | ||
296 | if (nodeNum<10) { | |
297 | sprintf(rotMatNum,"rot50%i",nodeNum); | |
298 | sprintf(nodeName0,"FTO00%i",nodeNum); | |
299 | sprintf(nodeName1,"FTO10%i",nodeNum); | |
300 | sprintf(nodeName2,"FTO20%i",nodeNum); | |
301 | sprintf(nodeName3,"FTO30%i",nodeNum); | |
302 | sprintf(nodeName4,"FTO40%i",nodeNum); | |
303 | } | |
304 | if (nodeNum>9) { | |
305 | sprintf(rotMatNum,"rot5%i",nodeNum); | |
306 | sprintf(nodeName0,"FTO0%i",nodeNum); | |
307 | sprintf(nodeName1,"FTO1%i",nodeNum); | |
308 | sprintf(nodeName2,"FTO2%i",nodeNum); | |
309 | sprintf(nodeName3,"FTO3%i",nodeNum); | |
310 | sprintf(nodeName4,"FTO4%i",nodeNum); | |
311 | } | |
312 | ||
313 | new TRotMatrix(rotMatNum,rotMatNum,90,-20*nodeNum,90,90-20*nodeNum,0,0); | |
314 | ang = (4.5-nodeNum) * kangle; | |
315 | ||
316 | if (fTOFHoles) { | |
317 | top->cd(); | |
318 | node = new TNode(nodeName2,nodeName2,"S_TOF_B", krTof*TMath::Cos(ang), krTof*TMath::Sin(ang), zOffsetB,rotMatNum); | |
319 | node->SetLineColor(kColorTOF); | |
320 | fNodes->Add(node); | |
321 | ||
322 | top->cd(); | |
323 | node = new TNode(nodeName3,nodeName3,"S_TOF_C", krTof*TMath::Cos(ang), krTof*TMath::Sin(ang),-zOffsetB,rotMatNum); | |
324 | node->SetLineColor(kColorTOF); | |
325 | fNodes->Add(node); | |
326 | } | |
327 | ||
328 | top->cd(); | |
329 | node = new TNode(nodeName4,nodeName4,"S_TOF_A", krTof*TMath::Cos(ang), krTof*TMath::Sin(ang), zOffsetA,rotMatNum); | |
330 | node->SetLineColor(kColorTOF); | |
331 | fNodes->Add(node); | |
332 | } // end loop on nodeNum | |
333 | ||
334 | } | |
335 | ||
336 | //_____________________________________________________________________________ | |
337 | void AliTOFv6T0::CreateGeometry() | |
338 | { | |
339 | // | |
340 | // Create geometry for Time Of Flight version 0 | |
341 | // | |
342 | //Begin_Html | |
343 | /* | |
344 | <img src="picts/AliTOFv6T0.gif"> | |
345 | */ | |
346 | //End_Html | |
347 | // | |
348 | // Creates common geometry | |
349 | // | |
350 | AliTOF::CreateGeometry(); | |
351 | } | |
352 | ||
353 | ||
354 | //_____________________________________________________________________________ | |
355 | void AliTOFv6T0::TOFpc(Float_t xtof, Float_t ytof, Float_t zlenA) | |
356 | { | |
357 | // | |
358 | // Definition of the Time Of Fligh Resistive Plate Chambers | |
359 | // | |
360 | ||
361 | const Float_t kPi = TMath::Pi(); | |
362 | ||
363 | const Float_t kInterCentrModBorder1 = 49.5; | |
364 | const Float_t kInterCentrModBorder2 = 57.5; | |
365 | const Float_t kExterInterModBorder1 = 196.0; | |
366 | const Float_t kExterInterModBorder2 = 203.5; | |
367 | ||
368 | const Float_t kLengthExInModBorder = 4.7; | |
369 | const Float_t kLengthInCeModBorder = 7.0; | |
370 | ||
371 | // module wall thickness (cm) | |
372 | const Float_t kModuleWallThickness = 0.33; | |
373 | ||
374 | // honeycomb layer between strips and cards (cm) | |
375 | const Float_t kHoneycombLayerThickness = 2.; | |
376 | ||
377 | AliDebug(1, "************************* TOF geometry **************************"); | |
378 | AliDebug(1,Form(" xtof %d", xtof)); | |
379 | AliDebug(1,Form(" ytof %d", ytof)); | |
380 | AliDebug(1,Form(" zlenA %d", zlenA)); | |
381 | AliDebug(2,Form(" zlenA*0.5 = %d", zlenA*0.5)); | |
382 | ||
383 | // Definition of the of fibre glass modules (FTOA, FTOB and FTOC) | |
6e2570fc | 384 | |
dfef1a15 | 385 | Float_t xcoor, ycoor, zcoor; |
386 | Float_t par[3]; | |
387 | Int_t *idtmed = fIdtmed->GetArray()-499; | |
388 | Int_t idrotm[100]; | |
389 | ||
390 | par[0] = xtof * 0.5; | |
391 | par[1] = ytof * 0.25; | |
392 | par[2] = zlenA * 0.5; | |
393 | gMC->Gsvolu("FTOA", "BOX ", idtmed[503], par, 3); // fibre glass | |
6e2570fc | 394 | |
dfef1a15 | 395 | if (fTOFHoles) { |
396 | par[0] = xtof * 0.5; | |
397 | par[1] = ytof * 0.25; | |
398 | par[2] = (zlenA*0.5 - kInterCentrModBorder1)*0.5; | |
399 | gMC->Gsvolu("FTOB", "BOX ", idtmed[503], par, 3); // fibre glass | |
400 | gMC->Gsvolu("FTOC", "BOX ", idtmed[503], par, 3); // fibre glass | |
401 | } | |
402 | ||
403 | // New supermodule card section description | |
404 | // 2 cm honeycomb layer between strips and cards | |
405 | par[0] = xtof*0.5 + 2.; | |
406 | par[1] = kHoneycombLayerThickness*0.5; | |
407 | par[2] = zlenA*0.5 + 2.; | |
408 | gMC->Gsvolu("FPEA", "BOX ", idtmed[506], par, 3); // Al + Cu honeycomb | |
409 | if (fTOFHoles) { | |
410 | //par[0] = xtof*0.5 + 2.; | |
411 | //par[1] = kHoneycombLayerThickness*0.5; | |
412 | par[2] = (zlenA*0.5 - kInterCentrModBorder1)*0.5 + 2.; | |
413 | gMC->Gsvolu("FPEB", "BOX ", idtmed[506], par, 3); // Al + Cu honeycomb | |
414 | } | |
415 | ||
416 | // Definition of the air card containers (FAIA and FAIB) | |
417 | ||
418 | par[0] = xtof*0.5; | |
419 | par[1] = (ytof*0.5 - kHoneycombLayerThickness)*0.5; | |
420 | par[2] = zlenA*0.5; | |
421 | gMC->Gsvolu("FAIA", "BOX ", idtmed[500], par, 3); // Air | |
422 | if (fTOFHoles) gMC->Gsvolu("FAIB", "BOX ", idtmed[500], par, 3); // Air | |
423 | ||
424 | // Positioning of fibre glass modules (FTOA, FTOB and FTOC) and | |
425 | // card containers (FPEA, FAIA and FAIB) | |
426 | ||
427 | //AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,-90.); | |
428 | AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,270.); | |
dfef1a15 | 429 | xcoor = 0.; |
430 | for(Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++){ | |
431 | if(fTOFSectors[isec]==-1)continue; | |
432 | char name[16]; | |
433 | sprintf(name, "BTOF%d",isec); | |
434 | if (fTOFHoles && (isec==11||isec==12)) { | |
435 | //if (fTOFHoles && (isec==16||isec==17)) { \\Old 6h convention | |
436 | //xcoor = 0.; | |
437 | ycoor = (zlenA*0.5 + kInterCentrModBorder1)*0.5; | |
438 | zcoor = -ytof * 0.25; | |
439 | gMC->Gspos("FTOB", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY"); | |
440 | gMC->Gspos("FTOC", 0, name, xcoor,-ycoor, zcoor, idrotm[0], "ONLY"); | |
441 | //xcoor = 0.; | |
442 | //ycoor = (zlenA*0.5 + kInterCentrModBorder1)*0.5; | |
443 | zcoor = kHoneycombLayerThickness*0.5; | |
444 | gMC->Gspos("FPEB", 1, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY"); | |
445 | gMC->Gspos("FPEB", 2, name, xcoor,-ycoor, zcoor, idrotm[0], "ONLY"); | |
446 | //xcoor = 0.; | |
447 | ycoor = 0.; | |
448 | zcoor = kHoneycombLayerThickness + (ytof*0.5 - kHoneycombLayerThickness)*0.5; | |
449 | gMC->Gspos("FAIB", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY"); | |
450 | } | |
451 | else { | |
452 | //xcoor = 0.; | |
453 | ycoor = 0.; | |
454 | zcoor = -ytof * 0.25; | |
455 | gMC->Gspos("FTOA", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY"); | |
456 | //xcoor = 0.; | |
457 | //ycoor = 0.; | |
458 | zcoor = kHoneycombLayerThickness*0.5; | |
459 | gMC->Gspos("FPEA", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY"); | |
460 | //xcoor = 0.; | |
461 | //ycoor = 0.; | |
462 | zcoor = kHoneycombLayerThickness + (ytof*0.5 - kHoneycombLayerThickness)*0.5; | |
463 | gMC->Gspos("FAIA", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY"); | |
464 | } | |
465 | } | |
466 | ||
467 | // Definition and positioning | |
468 | // of the not sensitive volumes with Insensitive Freon (FLTA, FLTB and FLTC) | |
469 | ||
470 | Float_t xFLT, yFLT, zFLTA; | |
471 | ||
472 | xFLT = xtof - kModuleWallThickness*2.; | |
473 | yFLT = ytof*0.5 - kModuleWallThickness; | |
474 | zFLTA = zlenA - kModuleWallThickness*2.; | |
475 | ||
476 | par[0] = xFLT*0.5; | |
477 | par[1] = yFLT*0.5; | |
478 | par[2] = zFLTA*0.5; | |
479 | gMC->Gsvolu("FLTA", "BOX ", idtmed[507], par, 3); // Freon mix | |
480 | ||
481 | xcoor = 0.; | |
482 | ycoor = kModuleWallThickness*0.5; | |
483 | zcoor = 0.; | |
484 | gMC->Gspos ("FLTA", 0, "FTOA", xcoor, ycoor, zcoor, 0, "ONLY"); | |
485 | ||
486 | if (fTOFHoles) { | |
487 | par[2] = (zlenA*0.5 - kInterCentrModBorder1 - kModuleWallThickness)*0.5; | |
488 | gMC->Gsvolu("FLTB", "BOX ", idtmed[507], par, 3); // Freon mix | |
489 | gMC->Gsvolu("FLTC", "BOX ", idtmed[507], par, 3); // Freon mix | |
490 | ||
491 | //xcoor = 0.; | |
492 | //ycoor = kModuleWallThickness*0.5; | |
493 | //zcoor = 0.; | |
494 | gMC->Gspos ("FLTB", 0, "FTOB", xcoor, ycoor, zcoor, 0, "ONLY"); | |
495 | gMC->Gspos ("FLTC", 0, "FTOC", xcoor, ycoor, zcoor, 0, "ONLY"); | |
496 | } | |
497 | ||
498 | Float_t alpha, tgal, beta, tgbe, trpa[11]; | |
499 | ||
500 | // Definition and positioning | |
501 | // of the fibre glass walls between central and intermediate modules (FWZ1 and FWZ2) | |
502 | ||
503 | tgal = (yFLT - 2.*kLengthInCeModBorder)/(kInterCentrModBorder2 - kInterCentrModBorder1); | |
504 | alpha = TMath::ATan(tgal); | |
505 | beta = (kPi*0.5 - alpha)*0.5; | |
506 | tgbe = TMath::Tan(beta); | |
507 | trpa[0] = xFLT*0.5; | |
508 | trpa[1] = 0.; | |
509 | trpa[2] = 0.; | |
510 | trpa[3] = kModuleWallThickness; | |
511 | trpa[4] = (kLengthInCeModBorder - kModuleWallThickness*tgbe)*0.5; | |
512 | trpa[5] = (kLengthInCeModBorder + kModuleWallThickness*tgbe)*0.5; | |
513 | trpa[6] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; | |
514 | trpa[7] = kModuleWallThickness; | |
515 | trpa[8] = (kLengthInCeModBorder - kModuleWallThickness*tgbe)*0.5; | |
516 | trpa[9] = (kLengthInCeModBorder + kModuleWallThickness*tgbe)*0.5; | |
517 | trpa[10] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; | |
518 | gMC->Gsvolu("FWZ1","TRAP", idtmed[503], trpa, 11); // fibre glass | |
519 | ||
520 | AliMatrix (idrotm[1],90., 90.,180.,0.,90.,180.); | |
521 | AliMatrix (idrotm[4],90., 90., 0.,0.,90., 0.); | |
522 | ||
523 | xcoor = 0.; | |
524 | ycoor = -(yFLT - kLengthInCeModBorder)*0.5; | |
525 | zcoor = kInterCentrModBorder1; | |
526 | gMC->Gspos("FWZ1", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[1],"ONLY"); | |
527 | gMC->Gspos("FWZ1", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[4],"ONLY"); | |
528 | ||
529 | AliMatrix (idrotm[2],90.,270., 0.,0.,90.,180.); | |
530 | AliMatrix (idrotm[5],90.,270.,180.,0.,90., 0.); | |
531 | ||
532 | xcoor = 0.; | |
533 | ycoor = (yFLT - kLengthInCeModBorder)*0.5; | |
534 | zcoor = kInterCentrModBorder2; | |
535 | gMC->Gspos("FWZ1", 3,"FLTA", xcoor, ycoor, zcoor,idrotm[2],"ONLY"); | |
536 | gMC->Gspos("FWZ1", 4,"FLTA", xcoor, ycoor,-zcoor,idrotm[5],"ONLY"); | |
537 | ||
538 | trpa[0] = 0.5*(kInterCentrModBorder2 - kInterCentrModBorder1)/TMath::Cos(alpha); | |
539 | trpa[1] = kModuleWallThickness; | |
540 | trpa[2] = xFLT*0.5; | |
541 | trpa[3] = -beta*kRaddeg; | |
542 | trpa[4] = 0.; | |
543 | trpa[5] = 0.; | |
544 | gMC->Gsvolu("FWZ2","PARA", idtmed[503], trpa, 6); // fibre glass | |
545 | ||
546 | AliMatrix (idrotm[3], alpha*kRaddeg,90.,90.+alpha*kRaddeg,90.,90.,180.); | |
547 | AliMatrix (idrotm[6],180.-alpha*kRaddeg,90.,90.-alpha*kRaddeg,90.,90., 0.); | |
548 | ||
549 | xcoor = 0.; | |
550 | ycoor = 0.; | |
551 | zcoor = (kInterCentrModBorder2 + kInterCentrModBorder1)*0.5; | |
552 | gMC->Gspos("FWZ2", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[3],"ONLY"); | |
553 | gMC->Gspos("FWZ2", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[6],"ONLY"); | |
554 | ||
555 | // Definition and positioning | |
556 | // of the fibre glass walls between intermediate and lateral modules (FWZ3 and FWZ4) | |
557 | ||
558 | tgal = (yFLT - 2.*kLengthExInModBorder)/(kExterInterModBorder2 - kExterInterModBorder1); | |
559 | alpha = TMath::ATan(tgal); | |
560 | beta = (kPi*0.5 - alpha)*0.5; | |
561 | tgbe = TMath::Tan(beta); | |
562 | trpa[0] = xFLT*0.5; | |
563 | trpa[1] = 0.; | |
564 | trpa[2] = 0.; | |
565 | trpa[3] = kModuleWallThickness; | |
566 | trpa[4] = (kLengthExInModBorder - kModuleWallThickness*tgbe)*0.5; | |
567 | trpa[5] = (kLengthExInModBorder + kModuleWallThickness*tgbe)*0.5; | |
568 | trpa[6] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; | |
569 | trpa[7] = kModuleWallThickness; | |
570 | trpa[8] = (kLengthExInModBorder - kModuleWallThickness*tgbe)*0.5; | |
571 | trpa[9] = (kLengthExInModBorder + kModuleWallThickness*tgbe)*0.5; | |
572 | trpa[10] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; | |
573 | gMC->Gsvolu("FWZ3","TRAP", idtmed[503], trpa, 11); // fibre glass | |
574 | ||
575 | xcoor = 0.; | |
576 | ycoor = (yFLT - kLengthExInModBorder)*0.5; | |
577 | zcoor = kExterInterModBorder1; | |
578 | gMC->Gspos("FWZ3", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[5],"ONLY"); | |
579 | gMC->Gspos("FWZ3", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[2],"ONLY"); | |
580 | ||
581 | if (fTOFHoles) { | |
582 | //xcoor = 0.; | |
583 | //ycoor = (yFLT - kLengthExInModBorder)*0.5; | |
584 | zcoor = -kExterInterModBorder1 + (zlenA*0.5 + kInterCentrModBorder1 - kModuleWallThickness)*0.5; | |
585 | gMC->Gspos("FWZ3", 5,"FLTB", xcoor, ycoor, zcoor,idrotm[2],"ONLY"); | |
586 | gMC->Gspos("FWZ3", 6,"FLTC", xcoor, ycoor,-zcoor,idrotm[5],"ONLY"); | |
587 | } | |
588 | ||
589 | //xcoor = 0.; | |
590 | ycoor = -(yFLT - kLengthExInModBorder)*0.5; | |
591 | zcoor = kExterInterModBorder2; | |
592 | gMC->Gspos("FWZ3", 3,"FLTA", xcoor, ycoor, zcoor,idrotm[4],"ONLY"); | |
593 | gMC->Gspos("FWZ3", 4,"FLTA", xcoor, ycoor,-zcoor,idrotm[1],"ONLY"); | |
594 | ||
595 | if (fTOFHoles) { | |
596 | //xcoor = 0.; | |
597 | //ycoor = -(yFLT - kLengthExInModBorder)*0.5; | |
598 | zcoor = -kExterInterModBorder2 + (zlenA*0.5 + kInterCentrModBorder1 - kModuleWallThickness)*0.5; | |
599 | gMC->Gspos("FWZ3", 7,"FLTB", xcoor, ycoor, zcoor,idrotm[1],"ONLY"); | |
600 | gMC->Gspos("FWZ3", 8,"FLTC", xcoor, ycoor,-zcoor,idrotm[4],"ONLY"); | |
601 | } | |
602 | ||
603 | trpa[0] = 0.5*(kExterInterModBorder2 - kExterInterModBorder1)/TMath::Cos(alpha); | |
604 | trpa[1] = kModuleWallThickness; | |
605 | trpa[2] = xFLT*0.5; | |
606 | trpa[3] = -beta*kRaddeg; | |
607 | trpa[4] = 0.; | |
608 | trpa[5] = 0.; | |
609 | gMC->Gsvolu("FWZ4","PARA", idtmed[503], trpa, 6); // fibre glass | |
610 | ||
611 | AliMatrix (idrotm[13],alpha*kRaddeg,90.,90.+alpha*kRaddeg,90.,90.,180.); | |
612 | AliMatrix (idrotm[16],180.-alpha*kRaddeg,90.,90.-alpha*kRaddeg,90.,90.,0.); | |
613 | ||
614 | //xcoor = 0.; | |
615 | ycoor = 0.; | |
616 | zcoor = (kExterInterModBorder2 + kExterInterModBorder1)*0.5; | |
617 | gMC->Gspos("FWZ4", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[16],"ONLY"); | |
618 | gMC->Gspos("FWZ4", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[13],"ONLY"); | |
619 | ||
620 | if (fTOFHoles) { | |
621 | //xcoor = 0.; | |
622 | //ycoor = 0.; | |
623 | zcoor = -(kExterInterModBorder2 + kExterInterModBorder1)*0.5 + | |
624 | (zlenA*0.5 + kInterCentrModBorder1 - kModuleWallThickness)*0.5; | |
625 | gMC->Gspos("FWZ4", 3,"FLTB", xcoor, ycoor, zcoor,idrotm[13],"ONLY"); | |
626 | gMC->Gspos("FWZ4", 4,"FLTC", xcoor, ycoor,-zcoor,idrotm[16],"ONLY"); | |
627 | } | |
628 | ||
629 | ||
630 | ///////////////// Detector itself ////////////////////// | |
631 | ||
632 | const Int_t knx = fTOFGeometry->NpadX(); // number of pads along x | |
633 | const Int_t knz = fTOFGeometry->NpadZ(); // number of pads along z | |
634 | const Float_t kPadX = fTOFGeometry->XPad(); // pad length along x | |
635 | const Float_t kPadZ = fTOFGeometry->ZPad(); // pad length along z | |
636 | ||
637 | // new description for strip volume -double stack strip- | |
638 | // -- all constants are expressed in cm | |
639 | // heigth of different layers | |
640 | const Float_t khhony = 1.0; // heigth of HONY Layer | |
641 | const Float_t khpcby = 0.08; // heigth of PCB Layer | |
642 | const Float_t khrgly = 0.055; // heigth of RED GLASS Layer | |
643 | ||
644 | const Float_t khfiliy = 0.125; // heigth of FISHLINE Layer | |
645 | const Float_t khglassy = 0.160*0.5; // heigth of GLASS Layer | |
646 | const Float_t khglfy = khfiliy+2.*khglassy; // heigth of GLASS+FISHLINE Layer | |
647 | ||
648 | const Float_t khcpcby = 0.16; // heigth of PCB Central Layer | |
649 | const Float_t kwhonz = 8.1; // z dimension of HONEY Layer | |
650 | const Float_t kwpcbz1 = 10.6; // z dimension of PCB Lower Layer | |
651 | const Float_t kwpcbz2 = 11.6; // z dimension of PCB Upper Layer | |
652 | const Float_t kwcpcbz = 13.; // z dimension of PCB Central Layer | |
653 | const Float_t kwrglz = 8.; // z dimension of RED GLASS Layer | |
654 | const Float_t kwglfz = 7.; // z dimension of GLASS+FISHLN Layer | |
655 | const Float_t klsensmx = knx*kPadX; // length of Sensitive Layer | |
656 | const Float_t khsensmy = 0.05; // heigth of Sensitive Layer | |
657 | const Float_t kwsensmz = knz*kPadZ; // width of Sensitive Layer | |
658 | ||
659 | // heigth of the FSTR Volume (the strip volume) | |
660 | const Float_t khstripy = 2.*khhony+2.*khpcby+4.*khrgly+2.*khglfy+khcpcby; | |
661 | ||
662 | // width of the FSTR Volume (the strip volume) | |
663 | const Float_t kwstripz = kwcpcbz; | |
664 | // length of the FSTR Volume (the strip volume) | |
665 | const Float_t klstripx = fTOFGeometry->StripLength(); | |
666 | ||
667 | Float_t parfp[3]={klstripx*0.5, khstripy*0.5, kwstripz*0.5}; | |
668 | // Coordinates of the strip center in the strip reference frame; | |
669 | // used for positioning internal strip volumes | |
670 | Float_t posfp[3]={0.,0.,0.}; | |
671 | ||
672 | // FSTR volume definition-filling this volume with non sensitive Gas Mixture | |
673 | gMC->Gsvolu("FSTR","BOX",idtmed[507],parfp,3); // Freon mix | |
674 | ||
675 | //-- HONY Layer definition | |
676 | //parfp[0] = klstripx*0.5; | |
677 | parfp[1] = khhony*0.5; | |
678 | parfp[2] = kwhonz*0.5; | |
679 | gMC->Gsvolu("FHON","BOX",idtmed[501],parfp,3); // honeycomb (Nomex) | |
680 | // positioning 2 HONY Layers on FSTR volume | |
681 | //posfp[0] = 0.; | |
682 | posfp[1] =-khstripy*0.5+parfp[1]; | |
683 | //posfp[2] = 0.; | |
684 | gMC->Gspos("FHON",1,"FSTR",0., posfp[1],0.,0,"ONLY"); | |
685 | gMC->Gspos("FHON",2,"FSTR",0.,-posfp[1],0.,0,"ONLY"); | |
686 | ||
687 | //-- PCB Layer definition | |
688 | //parfp[0] = klstripx*0.5; | |
689 | parfp[1] = khpcby*0.5; | |
690 | parfp[2] = kwpcbz1*0.5; | |
691 | gMC->Gsvolu("FPC1","BOX",idtmed[502],parfp,3); // G10 | |
692 | //parfp[0] = klstripx*0.5; | |
693 | //parfp[1] = khpcby*0.5; | |
694 | parfp[2] = kwpcbz2*0.5; | |
695 | gMC->Gsvolu("FPC2","BOX",idtmed[502],parfp,3); // G10 | |
696 | // positioning 2 PCB Layers on FSTR volume | |
697 | //posfp[0] = 0.; | |
698 | posfp[1] =-khstripy*0.5+khhony+parfp[1]; | |
699 | //posfp[2] = 0.; | |
700 | gMC->Gspos("FPC1",1,"FSTR",0.,-posfp[1],0.,0,"ONLY"); | |
701 | gMC->Gspos("FPC2",1,"FSTR",0., posfp[1],0.,0,"ONLY"); | |
702 | ||
703 | //-- central PCB layer definition | |
704 | //parfp[0] = klstripx*0.5; | |
705 | parfp[1] = khcpcby*0.5; | |
706 | parfp[2] = kwcpcbz*0.5; | |
707 | gMC->Gsvolu("FPCB","BOX",idtmed[502],parfp,3); // G10 | |
708 | // positioning the central PCB layer | |
709 | gMC->Gspos("FPCB",1,"FSTR",0.,0.,0.,0,"ONLY"); | |
710 | ||
711 | // Sensitive volume | |
712 | Float_t parfs[3] = {klsensmx*0.5, khsensmy*0.5, kwsensmz*0.5}; | |
713 | gMC->Gsvolu("FSEN","BOX",idtmed[508],parfs,3); // sensitive | |
714 | // dividing FSEN along z in knz=2 and along x in knx=48 | |
715 | gMC->Gsdvn("FSEZ","FSEN",knz,3); | |
716 | gMC->Gsdvn("FPAD","FSEZ",knx,1); | |
717 | // positioning a Sensitive layer inside FPCB | |
718 | gMC->Gspos("FSEN",1,"FPCB",0.,0.,0.,0,"ONLY"); | |
719 | ||
720 | //-- RED GLASS Layer definition | |
721 | //parfp[0] = klstripx*0.5; | |
722 | parfp[1] = khrgly*0.5; | |
723 | parfp[2] = kwrglz*0.5; | |
724 | gMC->Gsvolu("FRGL","BOX",idtmed[509],parfp,3); // glass | |
725 | // positioning 4 RED GLASS Layers on FSTR volume | |
726 | //posfp[0] = 0.; | |
727 | posfp[1] = -khstripy*0.5+khhony+khpcby+parfp[1]; | |
728 | //posfp[2] = 0.; | |
729 | gMC->Gspos("FRGL",1,"FSTR",0., posfp[1],0.,0,"ONLY"); | |
730 | gMC->Gspos("FRGL",4,"FSTR",0.,-posfp[1],0.,0,"ONLY"); | |
731 | //posfp[0] = 0.; | |
732 | posfp[1] = (khcpcby+khrgly)*0.5; | |
733 | //posfp[2] = 0.; | |
734 | gMC->Gspos("FRGL",2,"FSTR",0.,-posfp[1],0.,0,"ONLY"); | |
735 | gMC->Gspos("FRGL",3,"FSTR",0., posfp[1],0.,0,"ONLY"); | |
736 | ||
737 | //-- GLASS+FISHLINE Layer definition | |
738 | //parfp[0] = klstripx*0.5; | |
739 | parfp[1] = khglfy*0.5; | |
740 | parfp[2] = kwglfz*0.5; | |
741 | gMC->Gsvolu("FGLF","BOX",idtmed[504],parfp,3); | |
742 | ||
743 | // positioning 2 GLASS+FISHLINE Layers on FSTR volume | |
744 | //posfp[0] = 0.; | |
745 | posfp[1] = (khcpcby + khglfy)*0.5 + khrgly; | |
746 | //posfp[2] = 0.; | |
747 | gMC->Gspos("FGLF",1,"FSTR",0.,-posfp[1],0.,0,"ONLY"); | |
748 | gMC->Gspos("FGLF",2,"FSTR",0., posfp[1],0.,0,"ONLY"); | |
749 | ||
750 | // Positioning the Strips (FSTR volumes) in the FLT volumes | |
751 | Int_t maxStripNumbers [5] ={fTOFGeometry->NStripC(), | |
752 | fTOFGeometry->NStripB(), | |
753 | fTOFGeometry->NStripA(), | |
754 | fTOFGeometry->NStripB(), | |
755 | fTOFGeometry->NStripC()}; | |
756 | ||
757 | Int_t totalStrip = 0; | |
758 | Float_t xpos, zpos, ypos, ang; | |
759 | for(Int_t iplate = 0; iplate < fTOFGeometry->NPlates(); iplate++){ | |
760 | if (iplate>0) totalStrip += maxStripNumbers[iplate-1]; | |
761 | for(Int_t istrip = 0; istrip < maxStripNumbers[iplate]; istrip++){ | |
762 | ||
763 | ang = fTOFGeometry->GetAngles(iplate,istrip); | |
764 | AliDebug(1, Form(" iplate = %1i, istrip = %2i ---> ang = %f", iplate, istrip, ang)); | |
765 | ||
766 | if (ang>0.) AliMatrix (idrotm[istrip+totalStrip+1],90.,0.,90.+ang,90., ang, 90.); | |
767 | else if (ang==0.) AliMatrix (idrotm[istrip+totalStrip+1],90.,0.,90.,90., 0., 0.); | |
768 | else if (ang<0.) AliMatrix (idrotm[istrip+totalStrip+1],90.,0.,90.+ang,90.,-ang,270.); | |
769 | ||
770 | xpos = 0.; | |
771 | zpos = fTOFGeometry->GetDistances(iplate,istrip); | |
772 | ypos = fTOFGeometry->GetHeights(iplate,istrip) + yFLT*0.5; | |
773 | ||
774 | gMC->Gspos("FSTR",istrip+totalStrip+1,"FLTA", xpos, ypos,-zpos,idrotm[istrip+totalStrip+1], "ONLY"); | |
775 | ||
776 | if (fTOFHoles) { | |
777 | if (istrip+totalStrip+1>53) | |
778 | gMC->Gspos("FSTR",istrip+totalStrip+1,"FLTC", xpos, ypos,-zpos-(zlenA*0.5 + kInterCentrModBorder1 - kModuleWallThickness)*0.5,idrotm[istrip+totalStrip+1],"ONLY"); | |
779 | if (istrip+totalStrip+1<39) | |
780 | gMC->Gspos("FSTR",istrip+totalStrip+1,"FLTB", xpos, ypos,-zpos+(zlenA*0.5 + kInterCentrModBorder1 - kModuleWallThickness)*0.5,idrotm[istrip+totalStrip+1],"ONLY"); | |
781 | } | |
782 | } | |
783 | } | |
784 | ||
785 | // Definition of the cards, cooling tubes and layer for thermal dispersion | |
786 | // (3 volumes) | |
787 | ||
788 | // card volume definition | |
9f8488c2 | 789 | //Float_t carpar[3] = {9.5, 5.75, 0.5}; |
790 | Float_t carpar[3] = {9.5, 5.6, 0.55}; | |
791 | //gMC->Gsvolu("FCA1", "BOX ", idtmed[514], carpar, 3); // PCB+Alu small Card | |
792 | gMC->Gsvolu("FCA1", "BOX ", idtmed[500], carpar, 3); // air | |
dfef1a15 | 793 | carpar[0] = 19.25; |
9f8488c2 | 794 | //carpar[1] = 5.6;//5.75; |
795 | //carpar[2] = 0.55;//0.5; | |
796 | //gMC->Gsvolu("FCA2", "BOX ", idtmed[514], carpar, 3); // PCB+Alu long Card | |
797 | gMC->Gsvolu("FCA2", "BOX ", idtmed[500], carpar, 3); // air | |
798 | ||
799 | ||
800 | Float_t feaParam1[3] = {9.5, 5.6, 0.1}; | |
801 | gMC->Gsvolu("FFEA", "BOX ", idtmed[502], feaParam1, 3); // G10 | |
802 | ||
803 | Float_t al1[3] = {9.5, 0.5, 0.25}; | |
804 | gMC->Gsvolu("FAL1", "BOX ", idtmed[505], al1, 3); // Aluminium | |
805 | Float_t al2[3] = {7.2, 0.8, 0.25}; | |
806 | gMC->Gsvolu("FAL2", "BOX ", idtmed[505], al2, 3); // Aluminium | |
807 | Float_t al3[3] = {3.35, 3.7, 0.1}; | |
808 | gMC->Gsvolu("FAL3", "BOX ", idtmed[505], al3, 3); // Aluminium | |
809 | ||
810 | gMC->Gspos("FFEA", 1, "FCA1", 0., 0., -carpar[2]+feaParam1[2], 0, "ONLY"); | |
811 | gMC->Gspos("FAL1", 1, "FCA1", 0., carpar[1]-al1[1], -carpar[2]+2.*feaParam1[2]+al1[2], 0, "ONLY"); | |
812 | gMC->Gspos("FAL3", 1, "FCA1", 0., carpar[1]-al3[1], carpar[2]-al3[2], 0, "ONLY"); | |
813 | gMC->Gspos("FAL2", 1, "FCA1", 0., carpar[1]-2.*al3[1], carpar[2]-2.*al3[2]-al2[2], 0, "ONLY"); | |
814 | ||
815 | ||
816 | gMC->Gspos("FFEA", 2, "FCA2", -(feaParam1[0]+0.25), 0., -carpar[2]+feaParam1[2], 0, "ONLY"); | |
817 | gMC->Gspos("FAL1", 2, "FCA2", -(feaParam1[0]+0.25), carpar[1]-al1[1], -carpar[2]+2.*feaParam1[2]+al1[2], 0, "ONLY"); | |
818 | gMC->Gspos("FAL3", 2, "FCA2", -(feaParam1[0]+0.25), carpar[1]-al3[1], carpar[2]-al3[2], 0, "ONLY"); | |
819 | gMC->Gspos("FAL2", 2, "FCA2", -(feaParam1[0]+0.25), carpar[1]-2.*al3[1], carpar[2]-2.*al3[2]-al2[2], 0, "ONLY"); | |
820 | ||
821 | gMC->Gspos("FFEA", 3, "FCA2", (feaParam1[0]+0.25), 0., -carpar[2]+feaParam1[2], 0, "ONLY"); | |
822 | gMC->Gspos("FAL1", 3, "FCA2", (feaParam1[0]+0.25), carpar[1]-al1[1], -carpar[2]+2.*feaParam1[2]+al1[2], 0, "ONLY"); | |
823 | gMC->Gspos("FAL3", 3, "FCA2", (feaParam1[0]+0.25), carpar[1]-al3[1], carpar[2]-al3[2], 0, "ONLY"); | |
824 | gMC->Gspos("FAL2", 3, "FCA2", (feaParam1[0]+0.25), carpar[1]-2.*al3[1], carpar[2]-2.*al3[2]-al2[2], 0, "ONLY"); | |
825 | ||
826 | Float_t feaRoof1[3] = {9.5, 0.25, 1.7}; | |
827 | gMC->Gsvolu("FRO1", "BOX ", idtmed[505], feaRoof1, 3); // Aluminium | |
828 | Float_t feaRoof2[3] = {3.35, 0.05, 1.5}; | |
829 | gMC->Gsvolu("FRO2", "BOX ", idtmed[505], feaRoof2, 3); // Aluminium | |
830 | Float_t feaRoof3[3] = {3.35, feaRoof1[1]+feaRoof2[1], 0.1}; | |
831 | gMC->Gsvolu("FRO3", "BOX ", idtmed[505], feaRoof3, 3); // Aluminium | |
832 | ||
833 | Float_t feaRoof4[3] = {3.35, | |
834 | 0.05, | |
835 | carpar[2]-feaParam1[2]-al1[2]-al3[2]}; | |
836 | gMC->Gsvolu("FRO4", "BOX ", idtmed[505], feaRoof4, 3); // Aluminium | |
837 | ||
838 | Float_t bar[3] = {8.575, 0.6, 0.15}; | |
839 | gMC->Gsvolu("FBAR", "BOX ", idtmed[505], bar, 3); // Aluminium | |
840 | ||
dfef1a15 | 841 | |
842 | // tube volume definition | |
843 | Float_t tubepar[3] = {0., 0.4, xFLT*0.5-15.}; | |
844 | gMC->Gsvolu("FTUB", "TUBE", idtmed[513], tubepar, 3); // copper cooling tubes | |
845 | //tubepar[0]= 0.; | |
846 | tubepar[1]= 0.3; | |
847 | //tubepar[2]= xFLT*0.5 - 15.; | |
848 | gMC->Gsvolu("FITU", "TUBE", idtmed[510], tubepar, 3); // cooling water | |
849 | // Positioning of the water tube into the steel one | |
850 | gMC->Gspos("FITU",1,"FTUB",0.,0.,0.,0,"ONLY"); | |
851 | ||
852 | // cable | |
853 | Float_t cbpar[3] = {0., 0.5, tubepar[2]}; | |
854 | gMC->Gsvolu("FCAB", "TUBE", idtmed[511], cbpar, 3); // copper+alu | |
855 | ||
856 | // Alluminium components | |
857 | Float_t lonpar[3] = {tubepar[2], 6.15, 0.7}; | |
858 | gMC->Gsvolu("FTLN", "BOX ", idtmed[505], lonpar, 3); // alluminium | |
859 | lonpar[0] = 2.; | |
860 | lonpar[1] = 1.; | |
861 | lonpar[2] = zlenA*0.5; | |
862 | gMC->Gsvolu("FLON", "BOX ", idtmed[505], lonpar, 3); // alluminium | |
863 | ||
864 | // rotation matrix | |
865 | AliMatrix(idrotm[99], 180., 90., 90., 90., 90., 0.); | |
9f8488c2 | 866 | AliMatrix(idrotm[98], 90.,180., 90., 90.,180., 0.); |
dfef1a15 | 867 | |
868 | // cards, tubes, cables positioning | |
869 | Float_t carpos[3], rowstep = 6.66, ytub= 3.65, ycab= ytub-3.; | |
870 | Float_t rowgap[5] = {13.5, 22.9, 16.94, 23.8, 20.4}; | |
871 | Int_t row, rowb[5] = {6, 7, 6, 19, 7}, nrow; | |
872 | carpos[0] = 25. - xtof*0.5; | |
873 | carpos[1] = (11.5 - (ytof*0.5 - kHoneycombLayerThickness))*0.5; | |
874 | row = 1; | |
875 | for (Int_t sg= -1; sg< 2; sg+= 2) { | |
876 | carpos[2] = sg*zlenA*0.5; | |
877 | for (Int_t nb=0; nb<5; ++nb) { | |
878 | carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep); | |
879 | nrow = row + rowb[nb]; | |
880 | for ( ; row < nrow ; ++row) { | |
9f8488c2 | 881 | |
dfef1a15 | 882 | carpos[2] -= sg*rowstep; |
9f8488c2 | 883 | |
884 | if (nb==4) { | |
885 | gMC->Gspos("FCA1",2*row, "FAIA", carpos[0],carpos[1],carpos[2], 0,"ONLY"); | |
886 | gMC->Gspos("FCA1",2*row-1,"FAIA",-carpos[0],carpos[1],carpos[2], 0,"ONLY"); | |
887 | gMC->Gspos("FCA2", row, "FAIA", 0., carpos[1], carpos[2], 0, "ONLY"); | |
888 | ||
889 | //gMC->Gspos("FTUB", row, "FAIA", 0., ytub, carpos[2]-sg, idrotm[99], "ONLY"); | |
890 | gMC->Gspos("FTUB", row, "FAIA", 0., carpos[1]+carpar[1]-bar[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[1]), idrotm[99], "ONLY"); | |
891 | gMC->Gspos("FCAB", row, "FAIA", 0., ycab, carpos[2]-1.1, idrotm[99], "ONLY"); | |
892 | ||
893 | gMC->Gspos("FRO1",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); | |
894 | gMC->Gspos("FRO1",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); | |
895 | gMC->Gspos("FRO1",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); | |
896 | gMC->Gspos("FRO1",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); | |
897 | ||
898 | gMC->Gspos("FRO2",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); | |
899 | gMC->Gspos("FRO2",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); | |
900 | gMC->Gspos("FRO2",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); | |
901 | gMC->Gspos("FRO2",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); | |
902 | ||
903 | gMC->Gspos("FRO3",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+(carpar[2]-feaRoof3[2]), 0,"ONLY"); | |
904 | gMC->Gspos("FRO3",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+(carpar[2]-feaRoof3[2]), 0,"ONLY"); | |
905 | gMC->Gspos("FRO3",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+(carpar[2]-feaRoof3[2]), 0,"ONLY"); | |
906 | gMC->Gspos("FRO3",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+(carpar[2]-feaRoof3[2]), 0,"ONLY"); | |
907 | ||
908 | gMC->Gspos("FRO4",4*row, "FAIA", carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); | |
909 | gMC->Gspos("FRO4",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); | |
910 | gMC->Gspos("FRO4",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); | |
911 | gMC->Gspos("FRO4",4*row-3,"FAIA",-carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); | |
912 | ||
913 | gMC->Gspos("FBAR",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY"); | |
914 | gMC->Gspos("FBAR",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY"); | |
915 | gMC->Gspos("FBAR",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY"); | |
916 | gMC->Gspos("FBAR",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY"); | |
917 | ||
918 | } | |
919 | else { | |
920 | switch (sg) { | |
921 | case 1: | |
922 | gMC->Gspos("FCA1",2*row, "FAIA", carpos[0],carpos[1],carpos[2], 0,"ONLY"); | |
923 | gMC->Gspos("FCA1",2*row-1,"FAIA",-carpos[0],carpos[1],carpos[2], 0,"ONLY"); | |
924 | gMC->Gspos("FCA2", row, "FAIA", 0., carpos[1], carpos[2], 0, "ONLY"); | |
925 | break; | |
926 | case -1: | |
927 | gMC->Gspos("FCA1",2*row, "FAIA", carpos[0],carpos[1],carpos[2], idrotm[98],"ONLY"); | |
928 | gMC->Gspos("FCA1",2*row-1,"FAIA",-carpos[0],carpos[1],carpos[2], idrotm[98],"ONLY"); | |
929 | gMC->Gspos("FCA2", row, "FAIA", 0., carpos[1], carpos[2], idrotm[98], "ONLY"); | |
930 | break; | |
931 | } | |
932 | ||
933 | //gMC->Gspos("FTUB", row, "FAIA", 0., ytub, carpos[2]-sg, idrotm[99], "ONLY"); | |
934 | gMC->Gspos("FTUB", row, "FAIA", 0., carpos[1]+carpar[1]-bar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[1]), idrotm[99], "ONLY"); | |
935 | gMC->Gspos("FCAB", row, "FAIA", 0., ycab, carpos[2]-sg*1.1, idrotm[99], "ONLY"); | |
936 | ||
937 | gMC->Gspos("FRO1",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); | |
938 | gMC->Gspos("FRO1",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); | |
939 | gMC->Gspos("FRO1",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); | |
940 | gMC->Gspos("FRO1",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); | |
941 | ||
942 | gMC->Gspos("FRO2",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); | |
943 | gMC->Gspos("FRO2",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); | |
944 | gMC->Gspos("FRO2",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); | |
945 | gMC->Gspos("FRO2",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); | |
946 | ||
947 | gMC->Gspos("FRO3",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY"); | |
948 | gMC->Gspos("FRO3",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY"); | |
949 | gMC->Gspos("FRO3",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY"); | |
950 | gMC->Gspos("FRO3",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY"); | |
951 | ||
952 | gMC->Gspos("FRO4",4*row, "FAIA", carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); | |
953 | gMC->Gspos("FRO4",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); | |
954 | gMC->Gspos("FRO4",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); | |
955 | gMC->Gspos("FRO4",4*row-3,"FAIA",-carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); | |
956 | ||
957 | gMC->Gspos("FBAR",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY"); | |
958 | gMC->Gspos("FBAR",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY"); | |
959 | gMC->Gspos("FBAR",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY"); | |
960 | gMC->Gspos("FBAR",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY"); | |
961 | ||
962 | } | |
dfef1a15 | 963 | } |
964 | } | |
965 | gMC->Gspos("FTLN", 5+4*sg, "FAIA", 0., -0.1, 369.9*sg, 0, "ONLY"); | |
966 | gMC->Gspos("FTLN", 5+3*sg, "FAIA", 0., -0.1, 366.9*sg, 0, "ONLY"); | |
967 | gMC->Gspos("FTLN", 5+2*sg, "FAIA", 0., -0.1, 198.8*sg, 0, "ONLY"); | |
968 | gMC->Gspos("FTLN", 5+sg, "FAIA", 0., -0.1, 56.82*sg, 0, "ONLY"); | |
969 | } | |
9f8488c2 | 970 | gMC->Gspos("FCA1", 182, "FAIA", carpos[0],carpos[1],0., 0,"ONLY"); |
971 | gMC->Gspos("FCA1", 181, "FAIA",-carpos[0],carpos[1],0., 0,"ONLY"); | |
dfef1a15 | 972 | gMC->Gspos("FCA2", 91, "FAIA", 0., carpos[1], 0., 0, "ONLY"); |
9f8488c2 | 973 | |
974 | //gMC->Gspos("FTUB", 91, "FAIA", 0., ytub, -1., idrotm[99], "ONLY"); | |
975 | gMC->Gspos("FTUB", 91, "FAIA", 0., carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[1]), idrotm[99], "ONLY"); | |
976 | gMC->Gspos("FCAB", 91, "FAIA", 0., ycab, -1.1, idrotm[99], "ONLY"); | |
977 | ||
978 | gMC->Gspos("FRO1",364, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); | |
979 | gMC->Gspos("FRO1",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); | |
980 | gMC->Gspos("FRO1",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); | |
981 | gMC->Gspos("FRO1",361, "FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); | |
982 | ||
983 | gMC->Gspos("FRO2",364, "FAIA", carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); | |
984 | gMC->Gspos("FRO2",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); | |
985 | gMC->Gspos("FRO2",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); | |
986 | gMC->Gspos("FRO2",361, "FAIA",-carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); | |
987 | ||
988 | gMC->Gspos("FRO3",364, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof3[1],(carpar[2]-feaRoof3[2]), 0,"ONLY"); | |
989 | gMC->Gspos("FRO3",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],(carpar[2]-feaRoof3[2]), 0,"ONLY"); | |
990 | gMC->Gspos("FRO3",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],(carpar[2]-feaRoof3[2]), 0,"ONLY"); | |
991 | gMC->Gspos("FRO3",361, "FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof3[1],(carpar[2]-feaRoof3[2]), 0,"ONLY"); | |
992 | ||
993 | gMC->Gspos("FRO4",364, "FAIA", carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); | |
994 | gMC->Gspos("FRO4",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); | |
995 | gMC->Gspos("FRO4",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); | |
996 | gMC->Gspos("FRO4",361, "FAIA",-carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); | |
997 | ||
998 | gMC->Gspos("FBAR",364, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY"); | |
999 | gMC->Gspos("FBAR",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY"); | |
1000 | gMC->Gspos("FBAR",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY"); | |
1001 | gMC->Gspos("FBAR",361, "FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY"); | |
1002 | ||
1003 | gMC->Gspos("FLON", 2, "FAIA",-24., ytub+1.4, 0., 0, "MANY"); | |
1004 | gMC->Gspos("FLON", 1, "FAIA", 24., ytub+1.4, 0., 0, "MANY"); | |
1005 | ||
1006 | ||
dfef1a15 | 1007 | if (fTOFHoles) { |
1008 | row = 1; | |
1009 | for (Int_t sg= -1; sg< 2; sg+= 2) { | |
1010 | carpos[2] = sg*zlenA*0.5; | |
1011 | for (Int_t nb=0; nb<4; ++nb) { | |
1012 | carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep); | |
1013 | nrow = row + rowb[nb]; | |
1014 | for ( ; row < nrow ; ++row) { | |
1015 | carpos[2] -= sg*rowstep; | |
9f8488c2 | 1016 | |
1017 | switch (sg) { | |
1018 | case 1: | |
1019 | gMC->Gspos("FCA1",2*row, "FAIB", carpos[0],carpos[1],carpos[2], 0,"ONLY"); | |
1020 | gMC->Gspos("FCA1",2*row-1,"FAIB",-carpos[0],carpos[1],carpos[2], 0,"ONLY"); | |
1021 | gMC->Gspos("FCA2", row, "FAIB", 0., carpos[1], carpos[2], 0, "ONLY"); | |
1022 | break; | |
1023 | case -1: | |
1024 | gMC->Gspos("FCA1",2*row, "FAIB", carpos[0],carpos[1],carpos[2], idrotm[98],"ONLY"); | |
1025 | gMC->Gspos("FCA1",2*row-1,"FAIB",-carpos[0],carpos[1],carpos[2], idrotm[98],"ONLY"); | |
1026 | gMC->Gspos("FCA2", row, "FAIB", 0., carpos[1], carpos[2], idrotm[98], "ONLY"); | |
1027 | break; | |
1028 | } | |
1029 | ||
1030 | //gMC->Gspos("FTUB", row, "FAIB", 0., ytub,carpos[2]-sg, idrotm[99], "ONLY"); | |
1031 | gMC->Gspos("FTUB", row, "FAIB", 0., carpos[1]+carpar[1]-bar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[1]), idrotm[99], "ONLY"); | |
1032 | gMC->Gspos("FCAB", row, "FAIB", 0., ycab,carpos[2]-sg*1.1, idrotm[99], "ONLY"); | |
1033 | ||
1034 | gMC->Gspos("FRO1",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); | |
1035 | gMC->Gspos("FRO1",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); | |
1036 | gMC->Gspos("FRO1",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); | |
1037 | gMC->Gspos("FRO1",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); | |
1038 | ||
1039 | gMC->Gspos("FRO2",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); | |
1040 | gMC->Gspos("FRO2",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); | |
1041 | gMC->Gspos("FRO2",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); | |
1042 | gMC->Gspos("FRO2",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); | |
1043 | ||
1044 | gMC->Gspos("FRO3",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY"); | |
1045 | gMC->Gspos("FRO3",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY"); | |
1046 | gMC->Gspos("FRO3",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY"); | |
1047 | gMC->Gspos("FRO3",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY"); | |
1048 | ||
1049 | gMC->Gspos("FRO4",4*row, "FAIB", carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); | |
1050 | gMC->Gspos("FRO4",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); | |
1051 | gMC->Gspos("FRO4",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); | |
1052 | gMC->Gspos("FRO4",4*row-3,"FAIB",-carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); | |
1053 | ||
1054 | gMC->Gspos("FBAR",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY"); | |
1055 | gMC->Gspos("FBAR",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY"); | |
1056 | gMC->Gspos("FBAR",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY"); | |
1057 | gMC->Gspos("FBAR",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[1]), 0,"ONLY"); | |
1058 | ||
dfef1a15 | 1059 | } |
1060 | } | |
1061 | gMC->Gspos("FTLN", 5+4*sg, "FAIB", 0., -0.1, 369.9*sg, 0, "ONLY"); | |
1062 | gMC->Gspos("FTLN", 5+3*sg, "FAIB", 0., -0.1, 366.9*sg, 0, "ONLY"); | |
1063 | gMC->Gspos("FTLN", 5+2*sg, "FAIB", 0., -0.1, 198.8*sg, 0, "ONLY"); | |
1064 | gMC->Gspos("FTLN", 5+sg, "FAIB", 0., -0.1, 56.82*sg, 0, "ONLY"); | |
1065 | } | |
9f8488c2 | 1066 | gMC->Gspos("FLON", 2, "FAIB",-24., ytub+1.4, 0., 0, "MANY"); |
1067 | gMC->Gspos("FLON", 1, "FAIB", 24., ytub+1.4, 0., 0, "MANY"); | |
dfef1a15 | 1068 | } |
1069 | ||
1070 | // Cables and tubes on the side blocks | |
1071 | const Float_t kcbll = zlenA*0.5; // length of block | |
1072 | const Float_t kcbllh = zlenA*0.5 - kInterCentrModBorder2; // length of block in case of hole | |
1073 | const Float_t kcblw = 13.5; // width of block | |
1074 | const Float_t kcblh1 = 2.; // min. heigth of block | |
1075 | const Float_t kcblh2 = 12.3; // max. heigth of block | |
1076 | // volume definition | |
1077 | Float_t cblpar[11]; | |
1078 | tgal = (kcblh2 - kcblh1)/(2.*kcbll); | |
1079 | cblpar[0] = kcblw *0.5; | |
1080 | cblpar[1] = 0.; | |
1081 | cblpar[2] = 0.; | |
1082 | cblpar[3] = kcbll *0.5; | |
1083 | cblpar[4] = kcblh1 *0.5; | |
1084 | cblpar[5] = kcblh2 *0.5; | |
1085 | cblpar[6] = TMath::ATan(tgal)*kRaddeg; | |
1086 | cblpar[7] = kcbll *0.5; | |
1087 | cblpar[8] = kcblh1 *0.5; | |
1088 | cblpar[9] = kcblh2 *0.5; | |
1089 | cblpar[10]= cblpar[6]; | |
1090 | gMC->Gsvolu("FCBL", "TRAP", idtmed[512], cblpar, 11); // cables & tubes mix | |
1091 | Float_t sawpar[3] = {0.5, kcblh2*0.5, kcbll}; | |
1092 | gMC->Gsvolu("FSAW", "BOX ", idtmed[505], sawpar, 3); // Side Al walls | |
1093 | // volume positioning | |
1094 | AliMatrix(idrotm[7], 90., 90., 180., 0., 90., 180.); | |
1095 | AliMatrix(idrotm[8], 90., 90., 0., 0., 90., 0.); | |
1096 | xcoor = (xtof-kcblw)*0.5 - 2.*sawpar[0]; | |
1097 | ycoor = (kcblh1+kcblh2)*0.25 - (ytof*0.5 - kHoneycombLayerThickness)*0.5; | |
1098 | zcoor = kcbll*0.5; | |
1099 | gMC->Gspos("FCBL", 1, "FAIA", -xcoor, ycoor, -zcoor, idrotm[7], "ONLY"); | |
1100 | gMC->Gspos("FCBL", 2, "FAIA", xcoor, ycoor, -zcoor, idrotm[7], "ONLY"); | |
1101 | gMC->Gspos("FCBL", 3, "FAIA", -xcoor, ycoor, zcoor, idrotm[8], "ONLY"); | |
1102 | gMC->Gspos("FCBL", 4, "FAIA", xcoor, ycoor, zcoor, idrotm[8], "ONLY"); | |
1103 | xcoor = xtof*0.5-sawpar[0]; | |
1104 | ycoor = (kcblh2 - ytof*0.5 + kHoneycombLayerThickness)*0.5; | |
1105 | gMC->Gspos("FSAW", 1, "FAIA", -xcoor, ycoor, 0., 0, "ONLY"); | |
1106 | gMC->Gspos("FSAW", 2, "FAIA", xcoor, ycoor, 0., 0, "ONLY"); | |
1107 | if (fTOFHoles) { | |
1108 | cblpar[3] = kcbllh *0.5; | |
1109 | cblpar[5] = kcblh1*0.5 + kcbllh*tgal; | |
1110 | cblpar[7] = kcbllh *0.5; | |
1111 | cblpar[9] = cblpar[5]; | |
1112 | gMC->Gsvolu("FCBB", "TRAP", idtmed[512], cblpar, 11); // cables & tubes mix | |
1113 | xcoor = (xtof - kcblw)*0.5 - 2.*sawpar[0]; | |
1114 | ycoor = (kcblh1 + 2.*cblpar[5])*0.25 - (ytof*0.5 - kHoneycombLayerThickness)*0.5; | |
1115 | zcoor = kcbll-kcbllh*0.5; | |
1116 | gMC->Gspos("FCBB", 1, "FAIB", -xcoor, ycoor, -zcoor, idrotm[7], "ONLY"); | |
1117 | gMC->Gspos("FCBB", 2, "FAIB", xcoor, ycoor, -zcoor, idrotm[7], "ONLY"); | |
1118 | gMC->Gspos("FCBB", 3, "FAIB", -xcoor, ycoor, zcoor, idrotm[8], "ONLY"); | |
1119 | gMC->Gspos("FCBB", 4, "FAIB", xcoor, ycoor, zcoor, idrotm[8], "ONLY"); | |
1120 | xcoor = xtof*0.5 - sawpar[0]; | |
1121 | ycoor = (kcblh2 - ytof*0.5 + kHoneycombLayerThickness)*0.5; | |
1122 | gMC->Gspos("FSAW", 1, "FAIB", -xcoor, ycoor, 0., 0, "ONLY"); | |
1123 | gMC->Gspos("FSAW", 2, "FAIB", xcoor, ycoor, 0., 0, "ONLY"); | |
1124 | } | |
1125 | ||
1126 | // TOF Supermodule cover definition and positioning | |
1127 | Float_t covpar[3] = {xtof*0.5, 0.1, zlenA*0.5}; | |
1128 | gMC->Gsvolu("FCOV", "BOX ", idtmed[505], covpar, 3); // Al cover | |
1129 | xcoor = 0.; | |
1130 | ycoor = 12.5*0.5 - 0.1; | |
1131 | zcoor = 0.; | |
1132 | gMC->Gspos("FCOV", 0, "FAIA", xcoor, ycoor, zcoor, 0, "ONLY"); | |
1133 | if (fTOFHoles) gMC->Gspos("FCOV", 0, "FAIB", xcoor, ycoor, zcoor, 0, "ONLY"); | |
1134 | ||
1135 | // Services Volumes | |
1136 | ||
1137 | // Empty crate weight: 50 Kg, electronics cards + cables ~ 52 Kg. | |
1138 | // Per each side (A and C) the total weight is: 2x102 ~ 204 Kg. | |
1139 | // ... + weight of the connection pannel for the steel cooling system (Cr 18%, Ni 12%, Fe 70%) | |
1140 | // + other remaining elements + various supports | |
1141 | ||
1142 | // Each FEA card weight + all supports | |
1143 | // (including all bolts and not including the cable connectors) | |
1144 | // 353.1 g. | |
1145 | // Per each strip there are 4 FEA cards, then | |
1146 | // the total weight of the front-end electonics section is: 353.1 g x 4 = 1412.4 g. | |
1147 | ||
1148 | Float_t serpar[3] = {29.*0.5, 121.*0.5, 90.*0.5}; | |
1149 | gMC->Gsvolu("FTOS", "BOX ", idtmed[515], serpar, 3); // Al + Cu + steel | |
1150 | zcoor = (118.-90.)*0.5; | |
1151 | Float_t phi = -10., ra = fTOFGeometry->Rmin() + ytof*0.5; | |
1152 | for (Int_t i = 0; i < fTOFGeometry->NSectors(); i++) { | |
1153 | phi += 20.; | |
1154 | xcoor = ra * TMath::Cos(phi * kDegrad); | |
1155 | ycoor = ra * TMath::Sin(phi * kDegrad); | |
1156 | AliMatrix(idrotm[20+i], 90., phi, 90., phi + 270., 0., 0.); | |
1157 | gMC->Gspos("FTOS", i, "BFMO", xcoor, ycoor, zcoor, idrotm[20+i], "ONLY"); | |
1158 | } | |
1159 | zcoor = (90. - 223.)*0.5; | |
1160 | gMC->Gspos("FTOS", 1, "BBCE", ra, 0., zcoor, 0, "ONLY"); | |
1161 | ||
1162 | } | |
1163 | //_____________________________________________________________________________ | |
1164 | void AliTOFv6T0::DrawModule() const | |
1165 | { | |
1166 | // | |
1167 | // Draw a shaded view of the Time Of Flight version 5 | |
1168 | // | |
1169 | ||
1170 | // Set everything unseen | |
1171 | gMC->Gsatt("*", "seen", -1); | |
1172 | ||
1173 | // | |
1174 | //Set volumes visible | |
1175 | // | |
1176 | ||
1177 | //Set ALIC mother transparent | |
1178 | gMC->Gsatt("ALIC","SEEN", 0); | |
1179 | ||
1180 | //=====> Level 1 | |
1181 | // Level 1 for TOF volumes | |
1182 | gMC->Gsatt("B077","seen", 0); | |
1183 | ||
1184 | //=====> Level 2 | |
1185 | // Level 2 for TOF volumes | |
1186 | gMC->Gsatt("B071","seen", 0); | |
1187 | gMC->Gsatt("B074","seen", 0); | |
1188 | gMC->Gsatt("B075","seen", 0); | |
1189 | gMC->Gsatt("B076","seen",-1); // all B076 sub-levels skipped - | |
1190 | gMC->Gsatt("B080","seen", 0); // B080 does not has sub-level | |
1191 | ||
1192 | // Level 2 of B071 | |
1193 | gMC->Gsatt("B056","seen", 0); // B056 does not has sub-levels - | |
1194 | gMC->Gsatt("B063","seen",-1); // all B063 sub-levels skipped - | |
1195 | gMC->Gsatt("B065","seen",-1); // all B065 sub-levels skipped - | |
1196 | gMC->Gsatt("B067","seen",-1); // all B067 sub-levels skipped - | |
1197 | gMC->Gsatt("B072","seen",-1); // all B072 sub-levels skipped - | |
1198 | ||
1199 | char name[16]; | |
1200 | for (Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++) { | |
1201 | sprintf(name, "BREF%d",isec); | |
1202 | gMC->Gsatt(name,"seen", 0); // all BREF%d sub-levels skipped - | |
1203 | sprintf(name, "BTRD%d",isec); | |
1204 | gMC->Gsatt(name,"seen", 0); // all BTRD%d sub-levels skipped - | |
1205 | sprintf(name, "BTOF%d",isec); | |
1206 | gMC->Gsatt(name,"seen",-2); // all BTOF%d sub-levels skipped - | |
1207 | } | |
1208 | ||
1209 | gMC->Gdopt("hide", "on"); | |
1210 | gMC->Gdopt("shad", "on"); | |
1211 | gMC->Gsatt("*", "fill", 7); | |
1212 | gMC->SetClipBox("."); | |
1213 | gMC->SetClipBox("*", 100, 1000, 100, 1000, 100, 1000); | |
1214 | gMC->DefaultRange(); | |
1215 | gMC->Gdraw("alic", 40, 30, 0, 10, 9.5, .018, .018); | |
1216 | gMC->Gdhead(1111, "Time Of Flight"); | |
1217 | gMC->Gdman(18, 3, "MAN"); | |
1218 | gMC->Gdopt("hide","off"); | |
1219 | } | |
1220 | //_____________________________________________________________________________ | |
1221 | void AliTOFv6T0::DrawDetectorModules() const | |
1222 | { | |
1223 | // | |
1224 | // Draw a shaded view of the TOF detector SuperModules version 5 | |
1225 | // | |
1226 | ||
1227 | // Set everything unseen | |
1228 | gMC->Gsatt("*", "seen", -1); | |
1229 | ||
1230 | // | |
1231 | //Set volumes visible | |
1232 | // | |
1233 | ||
1234 | //Set ALIC mother transparent | |
1235 | gMC->Gsatt("ALIC","SEEN", 0); | |
1236 | ||
1237 | //=====> Level 1 | |
1238 | // Level 1 for TOF volumes | |
1239 | gMC->Gsatt("B077","seen", 0); | |
1240 | ||
1241 | //=====> Level 2 | |
1242 | // Level 2 for TOF volumes | |
1243 | gMC->Gsatt("B071","seen", 0); | |
1244 | gMC->Gsatt("B074","seen", 0); | |
1245 | gMC->Gsatt("B075","seen", 0); | |
1246 | gMC->Gsatt("B076","seen",-1); // all B076 sub-levels skipped - | |
1247 | gMC->Gsatt("B080","seen", 0); // B080 does not has sub-level | |
1248 | ||
1249 | // Level 2 of B071 | |
1250 | gMC->Gsatt("B056","seen", 0); // B056 does not has sub-levels - | |
1251 | gMC->Gsatt("B063","seen",-1); // all B063 sub-levels skipped - | |
1252 | gMC->Gsatt("B065","seen",-1); // all B065 sub-levels skipped - | |
1253 | gMC->Gsatt("B067","seen",-1); // all B067 sub-levels skipped - | |
1254 | gMC->Gsatt("B072","seen",-1); // all B072 sub-levels skipped - | |
1255 | ||
1256 | char name[16]; | |
1257 | for (Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++) { | |
1258 | sprintf(name, "BREF%d",isec); | |
1259 | gMC->Gsatt(name,"seen", 0); // all BREF%d sub-levels skipped - | |
1260 | sprintf(name, "BTRD%d",isec); | |
1261 | gMC->Gsatt(name,"seen", 0); // all BTRD%d sub-levels skipped - | |
1262 | sprintf(name, "BTOF%d",isec); | |
1263 | gMC->Gsatt(name,"seen", 0); // all BTOF%d sub-levels skipped - | |
1264 | } | |
1265 | ||
1266 | // Level 3 of B071, B075 and B074 | |
1267 | gMC->Gsatt("FTOA","seen",-2); // all FTOA sub-levels skipped - | |
1268 | if (fTOFHoles) gMC->Gsatt("FTOB","seen",-2); // all FTOB sub-levels skipped - | |
1269 | if (fTOFHoles) gMC->Gsatt("FTOC","seen",-2); // all FTOC sub-levels skipped - | |
1270 | ||
1271 | // Level 3 of B071, B075 and B074 | |
1272 | gMC->Gsatt("FAIA","seen",-1); // all FAIA sub-levels skipped - | |
1273 | if (fTOFHoles) gMC->Gsatt("FAIB","seen",-1); // all FAIB sub-levels skipped - | |
1274 | ||
1275 | // Level 3 of B071, B075 and B074 | |
1276 | gMC->Gsatt("FPEA","seen",1); // all FPEA sub-levels skipped - | |
1277 | if (fTOFHoles) gMC->Gsatt("FPEB","seen",1); // all FPEB sub-levels skipped - | |
1278 | ||
1279 | gMC->Gdopt("hide","on"); | |
1280 | gMC->Gdopt("shad","on"); | |
1281 | gMC->Gsatt("*", "fill", 5); | |
1282 | gMC->SetClipBox("."); | |
1283 | gMC->SetClipBox("*", 100, 1000, 100, 1000, 0, 1000); | |
1284 | gMC->DefaultRange(); | |
1285 | gMC->Gdraw("alic", 40, 30, 0, 10, 9.5, .018, .018); | |
1286 | gMC->Gdhead(1111,"TOF detector"); | |
1287 | gMC->Gdman(18, 3, "MAN"); | |
1288 | gMC->Gdopt("hide","off"); | |
1289 | } | |
1290 | ||
1291 | //_____________________________________________________________________________ | |
1292 | void AliTOFv6T0::DrawDetectorStrips() const | |
1293 | { | |
1294 | // | |
1295 | // Draw a shaded view of the TOF strips for version 5 | |
1296 | // | |
1297 | ||
1298 | // Set everything unseen | |
1299 | gMC->Gsatt("*", "seen", -1); | |
1300 | ||
1301 | // | |
1302 | //Set volumes visible | |
1303 | // | |
1304 | ||
1305 | //Set ALIC mother transparent | |
1306 | gMC->Gsatt("ALIC","SEEN", 0); | |
1307 | ||
1308 | //=====> Level 1 | |
1309 | // Level 1 for TOF volumes | |
1310 | gMC->Gsatt("B077","seen", 0); | |
1311 | ||
1312 | //=====> Level 2 | |
1313 | // Level 2 for TOF volumes | |
1314 | gMC->Gsatt("B071","seen", 0); | |
1315 | gMC->Gsatt("B074","seen", 0); | |
1316 | gMC->Gsatt("B075","seen", 0); | |
1317 | gMC->Gsatt("B076","seen",-1); // all B076 sub-levels skipped - | |
1318 | gMC->Gsatt("B080","seen", 0); // B080 does not has sub-level | |
1319 | ||
1320 | // Level 2 of B071 | |
1321 | gMC->Gsatt("B063","seen",-1); // all B063 sub-levels skipped - | |
1322 | gMC->Gsatt("B065","seen",-1); // all B065 sub-levels skipped - | |
1323 | gMC->Gsatt("B067","seen",-1); // all B067 sub-levels skipped - | |
1324 | gMC->Gsatt("B056","seen", 0); // B056 does not has sub-levels - | |
1325 | gMC->Gsatt("B072","seen",-1); // all B072 sub-levels skipped - | |
1326 | ||
1327 | char name[16]; | |
1328 | for (Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++) { | |
1329 | sprintf(name, "BREF%d",isec); | |
1330 | gMC->Gsatt(name,"seen", 0); // all BREF%d sub-levels skipped - | |
1331 | sprintf(name, "BTRD%d",isec); | |
1332 | gMC->Gsatt(name,"seen", 0); // all BTRD%d sub-levels skipped - | |
1333 | sprintf(name, "BTOF%d",isec); | |
1334 | gMC->Gsatt(name,"seen", 0); // all BTOF%d sub-levels skipped - | |
1335 | } | |
1336 | ||
1337 | // Level 3 of B071, B074 and B075 | |
1338 | gMC->Gsatt("FTOA","SEEN", 0); | |
1339 | if (fTOFHoles) gMC->Gsatt("FTOB","SEEN", 0); | |
1340 | if (fTOFHoles) gMC->Gsatt("FTOC","SEEN", 0); | |
1341 | ||
1342 | // Level 4 of B071, B074 and B075 | |
1343 | gMC->Gsatt("FLTA","SEEN", 0); | |
1344 | if (fTOFHoles) gMC->Gsatt("FLTB","SEEN", 0); | |
1345 | if (fTOFHoles) gMC->Gsatt("FLTC","SEEN", 0); | |
1346 | ||
1347 | // Level 5 of B071, B074 and B075 | |
1348 | gMC->Gsatt("FAIA","SEEN", 0); | |
1349 | if (fTOFHoles) gMC->Gsatt("FAIB","SEEN", 0); | |
1350 | ||
1351 | gMC->Gsatt("FPEA","SEEN", 1); | |
1352 | if (fTOFHoles) gMC->Gsatt("FPEB","SEEN", 1); | |
1353 | ||
1354 | gMC->Gsatt("FSTR","SEEN",-2); // all FSTR sub-levels skipped - | |
1355 | ||
1356 | gMC->Gsatt("FWZ1","SEEN", 1); | |
1357 | gMC->Gsatt("FWZ2","SEEN", 1); | |
1358 | gMC->Gsatt("FWZ3","SEEN", 1); | |
1359 | gMC->Gsatt("FWZ4","SEEN", 1); | |
1360 | ||
1361 | ||
1362 | // Level 2 of FAIA | |
1363 | // Level 2 of FAIB | |
1364 | gMC->Gsatt("FCA1","SEEN", 0); | |
1365 | gMC->Gsatt("FCA2","SEEN", 0); | |
1366 | gMC->Gsatt("FCAB","SEEN", 0); | |
1367 | gMC->Gsatt("FTUB","SEEN",-1); // all FTUB sub-levels skipped - | |
1368 | gMC->Gsatt("FTLN","SEEN", 0); | |
1369 | gMC->Gsatt("FLTN","SEEN", 0); | |
1370 | gMC->Gsatt("FCBL","SEEN", 0); | |
1371 | gMC->Gsatt("FSAW","SEEN", 0); | |
1372 | gMC->Gsatt("FCOV","SEEN", 0); | |
1373 | if (fTOFHoles) gMC->Gsatt("FCBB","SEEN", 0); | |
1374 | ||
1375 | // Level 2 of FTUB | |
1376 | gMC->Gsatt("FITU","SEEN", 0); | |
1377 | ||
1378 | // Level 2 of FSTR | |
1379 | gMC->Gsatt("FHON","SEEN", 1); | |
1380 | gMC->Gsatt("FPC1","SEEN", 1); | |
1381 | gMC->Gsatt("FPC2","SEEN", 1); | |
1382 | gMC->Gsatt("FPCB","SEEN", 1); | |
1383 | gMC->Gsatt("FRGL","SEEN", 1); | |
1384 | gMC->Gsatt("FGLF","SEEN", 1); | |
1385 | ||
1386 | // Level 2 of FPCB => Level 3 of FSTR | |
1387 | gMC->Gsatt("FSEN","SEEN", 0); | |
1388 | gMC->Gsatt("FSEZ","SEEN", 0); | |
1389 | gMC->Gsatt("FPAD","SEEN", 1); | |
1390 | ||
1391 | gMC->Gdopt("hide","on"); | |
1392 | gMC->Gdopt("shad","on"); | |
1393 | gMC->Gsatt("*", "fill", 5); | |
1394 | gMC->SetClipBox("."); | |
1395 | gMC->SetClipBox("*", 0, 1000, 0, 1000, 0, 1000); | |
1396 | gMC->DefaultRange(); | |
1397 | gMC->Gdraw("alic", 40, 30, 0, 10, 9.5, .018, .018); | |
1398 | gMC->Gdhead(1111,"TOF Strips"); | |
1399 | gMC->Gdman(18, 3, "MAN"); | |
1400 | gMC->Gdopt("hide","off"); | |
1401 | } | |
1402 | ||
1403 | //_____________________________________________________________________________ | |
1404 | void AliTOFv6T0::CreateMaterials() | |
1405 | { | |
1406 | // | |
1407 | // Define materials for the Time Of Flight | |
1408 | // | |
1409 | ||
1410 | //AliTOF::CreateMaterials(); | |
1411 | ||
1412 | AliMagF *magneticField = (AliMagF*)gAlice->Field(); | |
1413 | ||
1414 | Int_t isxfld = magneticField->Integ(); | |
1415 | Float_t sxmgmx = magneticField->Max(); | |
1416 | ||
1417 | Float_t we[7], na[7]; | |
1418 | ||
1419 | //--- Quartz (SiO2) to simulate float glass | |
1420 | // density tuned to have correct float glass | |
1421 | // radiation length | |
1422 | Float_t aq[2] = { 28.09,16. }; | |
1423 | Float_t zq[2] = { 14.,8. }; | |
1424 | Float_t wq[2] = { 1.,2. }; | |
1425 | //Float_t dq = 2.55; // std value: 2.2 | |
1426 | Float_t dq = 2.7; // (+5.9%) | |
1427 | Int_t nq = -2; | |
1428 | ||
1429 | // --- Nomex | |
1430 | Float_t anox[4] = {12.01,1.01,16.00,14.01}; | |
1431 | Float_t znox[4] = { 6., 1., 8., 7.}; | |
1432 | Float_t wnox[4] = {14., 22., 2., 2.}; | |
1433 | //Float_t dnox = 0.048; //old value | |
1434 | Float_t dnox = 0.22; // (x 4.6) | |
1435 | Int_t nnox = -4; | |
1436 | ||
1437 | // --- glass+freon { Si, O, C, F, H, S } | |
1438 | Float_t agfr[6]= {28.09,16.00,12.01,19.00,1.01,32.065}; | |
1439 | Float_t zgfr[6]= {14., 8., 6., 9., 1., 16.}; | |
1440 | Float_t wgfr[6]= {0.465, 0.530, 0.000484, 0.00383, 4.0e-05, 0.000646}; | |
1441 | Int_t ngfr = 6; | |
1442 | AliDebug(1,Form("wgfr: %d %d %d %d %d %d", wgfr[0], wgfr[1], wgfr[2], wgfr[3], wgfr[4], wgfr[5])); | |
1443 | //Float_t dgfr = 1.35; // + FISHLINE (old value) | |
1444 | Float_t dgfr = 1.6; // + FISHLINE(+18.5 %) | |
1445 | ||
1446 | // --- G10 {Si, O, C, H, O} | |
1447 | Float_t ag10[5] = {28.09,16.00,12.01,1.01,16.00}; | |
1448 | Float_t zg10[5] = {14., 8., 6., 1., 8.}; | |
1449 | Float_t wmatg10[5]; | |
1450 | Int_t nlmatg10 = 5; | |
1451 | na[0]= 1. , na[1]= 2. , na[2]= 0. , na[3]= 0. , na[4]= 0.; | |
1452 | MaterialMixer(we,ag10,na,5); | |
1453 | wmatg10[0]= we[0]*0.6; | |
1454 | wmatg10[1]= we[1]*0.6; | |
1455 | na[0]= 0. , na[1]= 0. , na[2]= 14. , na[3]= 20. , na[4]= 3.; | |
1456 | MaterialMixer(we,ag10,na,5); | |
1457 | wmatg10[2]= we[2]*0.4; | |
1458 | wmatg10[3]= we[3]*0.4; | |
1459 | wmatg10[4]= we[4]*0.4; | |
1460 | AliDebug(1,Form("wg10 %d %d %d %d %d", wmatg10[0], wmatg10[1], wmatg10[2], wmatg10[3], wmatg10[4])); | |
1461 | // Float_t densg10 = 1.7; //old value | |
e41ca6a9 | 1462 | Float_t densg10 = 2.0; // (+17.8%) |
dfef1a15 | 1463 | |
1464 | // -- Water | |
1465 | Float_t awa[2] = { 1., 16. }; | |
1466 | Float_t zwa[2] = { 1., 8. }; | |
1467 | Float_t wwa[2] = { 2., 1. }; | |
1468 | Float_t dwa = 1.0; | |
1469 | Int_t nwa = -2; | |
1470 | ||
1471 | // AIR | |
1472 | Float_t aAir[4]={12.0107,14.0067,15.9994,39.948}; | |
1473 | Float_t zAir[4]={6.,7.,8.,18.}; | |
1474 | Float_t wAir[4]={0.000124,0.755267,0.231781,0.012827}; | |
1475 | Float_t dAir = 1.20479E-3; | |
1476 | ||
1477 | // --- fibre glass | |
1478 | Float_t afg[4] = {28.09,16.00,12.01,1.01}; | |
1479 | Float_t zfg[4] = {14., 8., 6., 1.}; | |
1480 | Float_t wfg[4] = {0.12906,0.29405,0.51502,0.06187}; | |
1481 | //Float_t dfg = 1.111; | |
1482 | Float_t dfg = 2.; // (+1.8%) | |
1483 | Int_t nfg = 4; | |
1484 | ||
1485 | // --- Freon C2F4H2 + SF6 | |
1486 | Float_t afre[4]= {12.01,1.01,19.00,32.07}; | |
1487 | Float_t zfre[4]= { 6., 1., 9., 16.}; | |
1488 | Float_t wfre[4]= {0.21250,0.01787,0.74827,0.021355}; | |
1489 | Float_t densfre= 0.00375; | |
1490 | Int_t nfre = 4; | |
1491 | ||
1492 | // --- Al + Cu + G10 {Al, Cu, Si, O, C, H, O} | |
9f8488c2 | 1493 | Float_t acar[10]= {26.98, |
1494 | /*63.55,*/ | |
1495 | ag10[0], ag10[1], ag10[2], ag10[3], ag10[4], | |
1496 | aAir[0], aAir[1], aAir[2], aAir[3]}; | |
1497 | Float_t zcar[10]= {13., | |
1498 | /*29.,*/ | |
1499 | zg10[0], zg10[1], zg10[2], zg10[3], zg10[4], | |
1500 | zAir[0], zAir[1], zAir[2], zAir[3]}; | |
1501 | Float_t wcar[10]; | |
1502 | wcar[0]= 0.4732;//0.7; | |
1503 | //wcar[1]= 0.04;//0.05; | |
1504 | wcar[1]= 0.2854*wmatg10[0];//0.25*wmatg10[0]; | |
1505 | wcar[2]= 0.2854*wmatg10[1];//0.25*wmatg10[1]; | |
1506 | wcar[3]= 0.2854*wmatg10[2];//0.25*wmatg10[2]; | |
1507 | wcar[4]= 0.2854*wmatg10[3];//0.25*wmatg10[3]; | |
1508 | wcar[5]= 0.2854*wmatg10[4];//0.25*wmatg10[4]; | |
1509 | wcar[6]= 0.2414*wAir[0]; | |
1510 | wcar[7]= 0.2414*wAir[1]; | |
1511 | wcar[8]= 0.2414*wAir[2]; | |
1512 | wcar[9]= 0.2414*wAir[3]; | |
1513 | ||
1514 | AliDebug(1,Form("wcar %f %f %f %f %f %f %f %f %f %f", wcar[0], wcar[1], wcar[2], wcar[3], wcar[4], | |
1515 | wcar[5], wcar[6], wcar[7], wcar[8], wcar[9])); | |
1516 | Float_t dcar = 1.85;//1.9; | |
dfef1a15 | 1517 | |
1518 | // --- Cables, tubes {Al, Cu} --- | |
1519 | Float_t acbt[2]= {26.98,63.55}; | |
1520 | Float_t zcbt[2]= {13., 29.}; | |
1521 | //Float_t wcbt[2]= {0.541,0.459}; | |
1522 | Float_t wcbt[2]= {0.407,0.593}; | |
1523 | //Float_t decbt = 0.95; | |
1524 | Float_t decbt = 0.68; | |
1525 | ||
1526 | // --- Cable {Al, Cu} | |
1527 | Float_t wcb[2] = {0.165,0.835}; | |
1528 | Float_t decb = 0.962; | |
1529 | ||
1530 | // --- Honeycomb layer {Al, Cu} | |
1531 | Float_t whon[2]= {0.9,0.1}; | |
1532 | //Float_t dhon = 0.44; | |
1533 | Float_t dhon = 1.095; // (x 2.56) | |
1534 | ||
1535 | // --- Crates boxes {Al, Cu, Fe, Cr, Ni} | |
1536 | Float_t acra[5]= {26.98,63.55,55.845,52.00,58.69}; | |
1537 | Float_t zcra[5]= {13., 29., 26., 24., 28.}; | |
1538 | Float_t wcra[5]= {0.7,0.2,0.07,0.018,0.012}; | |
1539 | Float_t dcra = 0.77; | |
1540 | ||
1541 | AliMixture ( 0, "Air$", aAir, zAir, dAir, 4, wAir); | |
1542 | AliMixture ( 1, "Nomex$", anox, znox, dnox, nnox, wnox); | |
1543 | AliMixture ( 2, "G10$", ag10, zg10, densg10, nlmatg10, wmatg10); | |
1544 | AliMixture ( 3, "fibre glass$", afg, zfg, dfg, nfg, wfg); | |
1545 | AliMaterial( 4, "Al $", 26.98, 13., 2.7, 8.9, 37.2); | |
1546 | AliMixture ( 5, "Al+Cu honeycomb$", acbt, zcbt, dhon, 2, whon); | |
1547 | AliMixture ( 6, "Freon$", afre, zfre, densfre, nfre, wfre); | |
1548 | AliMixture ( 7, "Glass$", aq, zq, dq, nq, wq); | |
1549 | AliMixture ( 8, "glass-freon$", agfr, zgfr, dgfr, ngfr, wgfr); | |
1550 | AliMixture ( 9, "Water$", awa, zwa, dwa, nwa, wwa); | |
1551 | AliMixture (10, "Al+Cu$", acbt, zcbt, decbt, 2, wcbt); | |
9f8488c2 | 1552 | AliMaterial(11, "Cu $", 63.54, 29., 8.96, 1.43, 10.); |
dfef1a15 | 1553 | AliMixture (12, "Al+Cu (cable)$", acbt, zcbt, decb, 2, wcb); |
9f8488c2 | 1554 | AliMixture (13, "Al+Cu+G10$", acar, zcar, dcar, 10/*7*/, wcar); |
dfef1a15 | 1555 | AliMixture (14, "Al+Cu+steel$", acra, zcra, dcra, 5, wcra); |
9f8488c2 | 1556 | AliMaterial(15, "Cu_sensitive$", 63.54, 29., 3.392, 1.43, 10.); |
dfef1a15 | 1557 | |
1558 | Float_t epsil, stmin, deemax, stemax; | |
1559 | ||
1560 | // STD data | |
1561 | // EPSIL = 0.1 ! Tracking precision, | |
1562 | // STEMAX = 0.1 ! Maximum displacement for multiple scattering | |
1563 | // DEEMAX = 0.1 ! Maximum fractional energy loss, DLS | |
1564 | // STMIN = 0.1 | |
1565 | ||
1566 | // TOF data | |
1567 | epsil = .001; // Tracking precision, | |
1568 | stemax = -1.; // Maximum displacement for multiple scattering | |
1569 | deemax = -.3; // Maximum fractional energy loss, DLS | |
1570 | stmin = -.8; | |
1571 | ||
1572 | AliMedium( 1, "Air$", 0, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); | |
1573 | AliMedium( 2,"Nomex$", 1, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); | |
1574 | AliMedium( 3,"G10$", 2, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); | |
1575 | AliMedium( 4,"fibre glass$", 3, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); | |
1576 | AliMedium( 5,"glass-freon$", 8, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); | |
1577 | AliMedium( 6,"Al Frame$", 4, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); | |
1578 | AliMedium( 7,"honeycomb$", 5, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); | |
1579 | AliMedium( 8,"Fre$", 6, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); | |
9f8488c2 | 1580 | AliMedium( 9,"Cu-S$", 15, 1, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
dfef1a15 | 1581 | AliMedium(10,"Glass$", 7, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
1582 | AliMedium(11,"Water$", 9, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); | |
1583 | AliMedium(12,"Cable$", 12, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); | |
1584 | AliMedium(13,"Al+Cables$", 10, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); | |
1585 | AliMedium(14,"Copper$", 11, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); | |
1586 | AliMedium(15,"Cards$", 13, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); | |
1587 | AliMedium(16,"Crates$", 14, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); | |
1588 | ||
1589 | } | |
1590 | //_____________________________________________________________________________ | |
1591 | void AliTOFv6T0::Init() | |
1592 | { | |
1593 | // | |
1594 | // Initialise the detector after the geometry has been defined | |
1595 | // | |
1596 | AliDebug(1, "**************************************" | |
1597 | " TOF " | |
1598 | "**************************************"); | |
1599 | AliDebug(1, " Version 4 of TOF initialing, " | |
1600 | "symmetric TOF - Full Coverage version"); | |
1601 | ||
1602 | AliTOF::Init(); | |
1603 | ||
1604 | fIdFTOA = gMC->VolId("FTOA"); | |
1605 | if (fTOFHoles) { | |
1606 | fIdFTOB = gMC->VolId("FTOB"); | |
1607 | fIdFTOC = gMC->VolId("FTOC"); | |
1608 | } | |
1609 | fIdFLTA = gMC->VolId("FLTA"); | |
1610 | if (fTOFHoles) { | |
1611 | fIdFLTB = gMC->VolId("FLTB"); | |
1612 | fIdFLTC = gMC->VolId("FLTC"); | |
1613 | } | |
1614 | ||
1615 | AliDebug(1, "**************************************" | |
1616 | " TOF " | |
1617 | "**************************************"); | |
1618 | } | |
1619 | ||
1620 | //_____________________________________________________________________________ | |
1621 | void AliTOFv6T0::StepManager() | |
1622 | { | |
1623 | ||
1624 | // | |
1625 | // Procedure called at each step in the Time Of Flight | |
1626 | // | |
1627 | ||
1628 | TLorentzVector mom, pos; | |
1629 | Float_t xm[3],pm[3],xpad[3],ppad[3]; | |
1630 | Float_t hits[14]; | |
1631 | Int_t vol[5]; | |
1632 | Int_t sector, plate, padx, padz, strip; | |
1633 | Int_t copy, padzid, padxid, stripid, i; | |
1634 | Int_t *idtmed = fIdtmed->GetArray()-499; | |
1635 | Float_t incidenceAngle; | |
1636 | ||
1637 | const char* volpath; | |
1638 | ||
1639 | Int_t index = 0; | |
1640 | ||
1641 | if( | |
1642 | gMC->IsTrackEntering() | |
1643 | && gMC->TrackCharge() | |
1644 | //&& gMC->GetMedium()==idtmed[508] | |
1645 | && gMC->CurrentMedium()==idtmed[508] | |
1646 | && gMC->CurrentVolID(copy)==fIdSens | |
1647 | ) | |
1648 | { | |
1649 | ||
1650 | AliMC *mcApplication = (AliMC*)gAlice->GetMCApp(); | |
1651 | ||
e6add757 | 1652 | AddTrackReference(mcApplication->GetCurrentTrackNumber(), AliTrackReference::kTOF); |
dfef1a15 | 1653 | //AddTrackReference(gAlice->GetMCApp()->GetCurrentTrackNumber()); |
1654 | ||
1655 | // getting information about hit volumes | |
1656 | ||
1657 | padzid=gMC->CurrentVolOffID(1,copy); | |
1658 | padz=copy; | |
1659 | padz--; | |
1660 | ||
1661 | padxid=gMC->CurrentVolOffID(0,copy); | |
1662 | padx=copy; | |
1663 | padx--; | |
1664 | ||
1665 | stripid=gMC->CurrentVolOffID(4,copy); | |
1666 | strip=copy; | |
1667 | strip--; | |
1668 | ||
1669 | gMC->TrackPosition(pos); | |
1670 | gMC->TrackMomentum(mom); | |
1671 | ||
1672 | Double_t normMom=1./mom.Rho(); | |
1673 | ||
1674 | // getting the coordinates in pad ref system | |
1675 | ||
1676 | xm[0] = (Float_t)pos.X(); | |
1677 | xm[1] = (Float_t)pos.Y(); | |
1678 | xm[2] = (Float_t)pos.Z(); | |
1679 | ||
1680 | pm[0] = (Float_t)mom.X()*normMom; | |
1681 | pm[1] = (Float_t)mom.Y()*normMom; | |
1682 | pm[2] = (Float_t)mom.Z()*normMom; | |
1683 | ||
1684 | gMC->Gmtod(xm,xpad,1); // from MRS to DRS: coordinates convertion | |
1685 | gMC->Gmtod(pm,ppad,2); // from MRS to DRS: direction cosinus convertion | |
1686 | ||
1687 | ||
1688 | if (TMath::Abs(ppad[1])>1) { | |
1689 | AliWarning("Abs(ppad) > 1"); | |
1690 | ppad[1]=TMath::Sign((Float_t)1,ppad[1]); | |
1691 | } | |
1692 | incidenceAngle = TMath::ACos(ppad[1])*kRaddeg; | |
1693 | ||
1694 | plate = -1; | |
1695 | if (strip < fTOFGeometry->NStripC()) { | |
1696 | plate = 0; | |
1697 | //strip = strip; | |
1698 | } | |
1699 | else if (strip >= fTOFGeometry->NStripC() && | |
1700 | strip < fTOFGeometry->NStripC() + fTOFGeometry->NStripB()) { | |
1701 | plate = 1; | |
1702 | strip = strip - fTOFGeometry->NStripC(); | |
1703 | } | |
1704 | else if (strip >= fTOFGeometry->NStripC() + fTOFGeometry->NStripB() && | |
1705 | strip < fTOFGeometry->NStripC() + fTOFGeometry->NStripB() + fTOFGeometry->NStripA()) { | |
1706 | plate = 2; | |
1707 | strip = strip - fTOFGeometry->NStripC() - fTOFGeometry->NStripB(); | |
1708 | } | |
1709 | else if (strip >= fTOFGeometry->NStripC() + fTOFGeometry->NStripB() + fTOFGeometry->NStripA() && | |
1710 | strip < fTOFGeometry->NStripC() + fTOFGeometry->NStripB() + fTOFGeometry->NStripA() + fTOFGeometry->NStripB()) { | |
1711 | plate = 3; | |
1712 | strip = strip - fTOFGeometry->NStripC() - fTOFGeometry->NStripB() - fTOFGeometry->NStripA(); | |
1713 | } | |
1714 | else { | |
1715 | plate = 4; | |
1716 | strip = strip - fTOFGeometry->NStripC() - fTOFGeometry->NStripB() - fTOFGeometry->NStripA() - fTOFGeometry->NStripB(); | |
1717 | } | |
1718 | ||
1719 | volpath=gMC->CurrentVolOffName(7); | |
1720 | index=atoi(&volpath[4]); | |
1721 | sector=-1; | |
1722 | sector=index; | |
1723 | ||
1724 | //Old 6h convention | |
1725 | // if(index<5){ | |
1726 | // sector=index+13; | |
1727 | // } | |
1728 | // else{ | |
1729 | // sector=index-5; | |
1730 | // } | |
1731 | ||
1732 | for(i=0;i<3;++i) { | |
1733 | hits[i] = pos[i]; | |
1734 | hits[i+3] = pm[i]; | |
1735 | } | |
1736 | ||
1737 | hits[6] = mom.Rho(); | |
1738 | hits[7] = pos[3]; | |
1739 | hits[8] = xpad[0]; | |
1740 | hits[9] = xpad[1]; | |
1741 | hits[10]= xpad[2]; | |
1742 | hits[11]= incidenceAngle; | |
1743 | hits[12]= gMC->Edep(); | |
1744 | hits[13]= gMC->TrackLength(); | |
1745 | ||
1746 | vol[0]= sector; | |
1747 | vol[1]= plate; | |
1748 | vol[2]= strip; | |
1749 | vol[3]= padx; | |
1750 | vol[4]= padz; | |
1751 | ||
1752 | AddT0Hit(mcApplication->GetCurrentTrackNumber(),vol, hits); | |
1753 | //AddT0Hit(gAlice->GetMCApp()->GetCurrentTrackNumber(),vol, hits); | |
1754 | } | |
1755 | } | |
1756 | //------------------------------------------------------------------- | |
1757 | void AliTOFv6T0::MaterialMixer(Float_t* p,Float_t* a,Float_t* m,Int_t n) const | |
1758 | { | |
1759 | // a[] atomic weights vector (in) | |
1760 | // (atoms present in more compound appear separately) | |
1761 | // m[] number of corresponding atoms in the compound (in) | |
1762 | Float_t t = 0.; | |
1763 | for (Int_t i = 0; i < n; ++i) { | |
1764 | p[i] = a[i]*m[i]; | |
1765 | t += p[i]; | |
1766 | } | |
1767 | for (Int_t i = 0; i < n; ++i) { | |
1768 | p[i] = p[i]/t; | |
1769 | //AliDebug(1,Form((\n weight[%i] = %f (,i,p[i])); | |
1770 | } | |
1771 | } |