2 Contact: henrik.tydesjo@cern.ch
3 Link: tydes.home.cern.ch/tydes/doc/CalibrationOverview/CalibrationAlgorithms/
6 Number of events needed: Depending on muliplicity per event
7 Input Files: spd_physics_params , ./calibResults/DeadReferenceTmp/* , ./calibResults/DeadToFXS/*
8 Output Files: ./calibResults/NoisyReference/* , ./calibResults/DeadReference/* , ./calibResults/NoisyToFXS/* , ./calibResults/DeadReferenceTmp/*,./calibResults/DeadToFXS/*
9 Trigger types used: PHYSICS
12 ////////////////////////////////////////////////////////////////////////////////
13 // This program can be compiled in two modes. //
15 // 1. Online. With the DAQ DA framework. This is the default operating mode. //
17 // 2. Offline. Without the DAQ DA framework. Define the SPD_DA_OFF //
18 // environment var. Call this program with the name of the executable //
19 // followed by the runNr and the data files to process. //
21 ////////////////////////////////////////////////////////////////////////////////
30 #include "AliRawReaderDate.h"
31 #include "AliITSRawStreamSPD.h"
32 #include "AliITSOnlineSPDphys.h"
33 #include "AliITSOnlineSPDphysAnalyzer.h"
34 #include "AliITSOnlineCalibrationSPDhandler.h"
40 #include <TPluginManager.h>
41 #include <TObjArray.h>
42 #include <TObjString.h>
47 int main(int argc, char **argv) {
49 printf("SPD DA ERROR: Wrong number of arguments\n");
55 // directory structure, hard coded // FOR OFFLINE VERSION:
56 char *saveDirDead = "./calibResults/Dead"; // may NOT delete content
57 char *saveDirDeadToFXS = "./calibResults/DeadToFXS"; // may delete content
58 char *saveDirDeadRef = "./calibResults/DeadReference"; // may delete content
59 char *saveDirDeadRefTmp = "./calibResults/DeadReferenceTmp"; // may NOT delete content
60 char *saveDirNoisyToFXS = "./calibResults/NoisyToFXS"; // may delete content
61 char *saveDirNoisyRef = "./calibResults/NoisyReference"; // may delete content
62 char *saveDirIdsToFXS = "./calibResults/IdsToFXS"; // may delete content
63 char *configFilesDir = "./configFiles"; // may delete content
64 // clean up and make sure the directory structure is put up correctly:
66 system("rm ./calibResults -rf >& /dev/null");
67 system("rm ./ITS -rf >& /dev/null");
69 system("rm ./calibResults/DeadToFXS -rf >& /dev/null");
70 system("rm ./calibResults/DeadReference -rf >& /dev/null");
71 system("rm ./calibResults/NoisyToFXS -rf >& /dev/null");
72 system("rm ./calibResults/NoisyReference -rf >& /dev/null");
73 system("rm ./calibResults/IdsToFXS -rf >& /dev/null");
75 system("mkdir ./calibResults >& /dev/null");
76 system("mkdir ./calibResults/Dead >& /dev/null");
77 system("mkdir ./calibResults/DeadToFXS >& /dev/null");
78 system("mkdir ./calibResults/DeadReference >& /dev/null");
79 system("mkdir ./calibResults/DeadReferenceTmp >& /dev/null");
80 system("mkdir ./calibResults/NoisyToFXS >& /dev/null");
81 system("mkdir ./calibResults/NoisyReference >& /dev/null");
82 system("mkdir ./calibResults/IdsToFXS >& /dev/null");
83 system("mkdir ./configFiles >& /dev/null");
85 system("mkdir ./ITS >& /dev/null");
86 system("mkdir ./ITS/Calib >& /dev/null");
87 system("mkdir ./ITS/Calib/SPDNoisy >& /dev/null");
89 // parameters config file
90 TString paramsFileName = Form("%s/physics_params.txt",configFilesDir);
92 // This line is needed in case of a stand-alone application w/o
93 // $ROOTSYS/etc/system.rootrc file
94 gROOT->GetPluginManager()->AddHandler("TVirtualStreamerInfo",
100 // turn off annoying warning messages
101 // NB: Should not be handled here
102 AliLog* logger = AliLog::GetRootLogger();
103 logger->SetGlobalDebugLevel(-20);
105 // ********* STEP 0: Get configuration files from db (if there are any) , then read parameters*********
106 UInt_t nrTuningParams = 0;
107 TObjArray paramNames; paramNames.SetOwner(kTRUE);
108 TObjArray paramVals; paramVals.SetOwner(kTRUE);
110 // tuning parameters:
111 Int_t par_status = 0;
113 TString idp = "spd_physics_params";
114 par_status=daqDA_DB_getFile(idp.Data(),paramsFileName.Data());
116 printf("SPD DA: Failed to get config file %s: status=%d. Using default tuning parameters.\n",idp.Data(),par_status);
117 TString rmCmd = Form("rm -f %s",paramsFileName.Data());
118 system(rmCmd.Data());
123 paramsFile.open(paramsFileName.Data(), ifstream::in);
124 if (paramsFile.fail()) {
125 printf("SPD DA: No config file (%s) present. Using default tuning parameters.\n",paramsFileName.Data());
131 paramsFile >> paramN;
132 if (paramsFile.eof()) break;
133 paramsFile >> paramV;
134 paramNames.AddAtAndExpand(new TObjString(paramN),nrTuningParams);
135 paramVals.AddAtAndExpand(new TObjString(paramV),nrTuningParams);
137 if (paramsFile.eof()) break;
142 // for (UInt_t i=0; i<nrTuningParams; i++) {
143 // // printf("Entry %d: N=%s , V=%s\n",i,((TString*)paramNames.At(i))->Data(),((TString*)paramVals.At(i))->Data());
144 // printf("Entry %d: N=%s , V=%s\n",i,((TObjString*)paramNames.At(i))->GetString().Data(),((TObjString*)paramVals.At(i))->GetString().Data());
151 // create calibration handler (needed already at step 1 in order to fill which eq,hs,chips are active
152 AliITSOnlineCalibrationSPDhandler* handler = new AliITSOnlineCalibrationSPDhandler();
154 // Read silent=dead+inactive info from previous calibrations
156 for (UInt_t eq=0; eq<20; eq++) {
157 Int_t getPreviousDead_status = 0;
158 TString idpd = Form("spd_previous_dead_%d",eq);
159 TString fileName = Form("%s/SPD_Dead_%d.root",saveDirDead,eq);
160 getPreviousDead_status = daqDA_DB_getFile(idpd.Data(),fileName.Data());
161 // printf("daqDA_DB_getFile(%s,%s)\n",idpd.Data(),fileName.Data());
162 if (getPreviousDead_status) {
163 printf("SPD DA: Failed to get dead file %s: status=%d. Dead search will start from zero for this eq.\n",idpd.Data(),getPreviousDead_status);
164 TString rmCmd = Form("rm -f %s",fileName.Data());
165 system(rmCmd.Data());
169 handler->SetFileLocation(saveDirDead);
170 handler->ReadSilentFromFiles();
171 printf("SPD DA: Number of single dead pixels from previous runs: %d\n",handler->GetNrDead());
173 // Read hit-maps from previous runs
175 for (UInt_t eq=0; eq<20; eq++) {
176 Int_t getPreviousHitmap_status = 0;
177 TString idph = Form("spd_previous_hitmap_%d",eq);
178 TString fileName = Form("%s/SPDphys_dead_run_0_0_eq_%d.root",saveDirDeadRefTmp,eq);
179 getPreviousHitmap_status = daqDA_DB_getFile(idph.Data(),fileName.Data());
180 // printf("daqDA_DB_getFile(%s,%s)\n",idph.Data(),fileName.Data());
181 if (getPreviousHitmap_status) {
182 printf("SPD DA: Failed to get previous hitmap file %s: status=%d. Dead search will start with empty hitmap for this eq.\n",idph.Data(),getPreviousHitmap_status);
183 TString rmCmd = Form("rm -f %s",fileName.Data());
184 system(rmCmd.Data());
192 // ********* STEP 1: Produce phys container files (Reference Data). ***********************************
195 if (getenv("DATE_RUN_NUMBER")==0) {
196 printf("SPD DA ERROR: DATE_RUN_NUMBER not properly set.\n");
199 int runNr = atoi(getenv("DATE_RUN_NUMBER"));
201 int runNr = atoi(argv[1]);
207 AliITSOnlineSPDphys *physObj[20];
208 Bool_t bPhysInit[20];
209 for (UInt_t eq=0; eq<20; eq++) {
211 bPhysInit[eq]=kFALSE;
217 // loop over run segments in case of offline mode
219 for (int segNr=startSeg; segNr<argc; segNr++) {
224 /* define data source : */
226 status=monitorSetDataSource( argv[1] ); // should be "^SPD" in order to get full detector online
228 status=monitorSetDataSource( argv[segNr] );
231 printf("SPD DA ERROR: monitorSetDataSource() failed : %s\n",monitorDecodeError(status));
234 /* declare monitoring program */
235 status=monitorDeclareMp("ITS_SPD_PHYS");
237 printf("SPD DA ERROR: monitorDeclareMp() failed : %s\n",monitorDecodeError(status));
240 /* define wait event timeout - 1s max */
242 monitorSetNoWaitNetworkTimeout(1000);
245 /* main loop (infinite) */
248 struct eventHeaderStruct *event;
249 eventTypeType eventT;
251 /* check shutdown condition */
253 if (daqDA_checkShutdown()) {break;}
256 /* get next event (blocking call until timeout) */
257 status=monitorGetEventDynamic((void **)&event);
258 if (status==MON_ERR_EOF) {
259 printf ("SPD DA: End of File detected\n");
260 break; /* end of monitoring file has been reached */
264 printf("SPD DA: monitorGetEventDynamic() failed : %s\n",monitorDecodeError(status));
268 /* retry if got no event */
273 eventT=event->eventType;
274 if (eventT == PHYSICS_EVENT){
276 // printf("eventNr %d\n",eventNr);
278 AliRawReader *reader = new AliRawReaderDate((void*)event);
279 AliITSRawStreamSPD *str = new AliITSRawStreamSPD(reader);
281 while (str->Next()) {
283 Int_t eq = reader->GetDDLID();
284 // check that this hs is active in handler object
285 if (!(handler->IsActiveEq(eq))) {
286 printf("SPD DA: Found Eq (%d) , previously inactive\n",eq);
287 handler->ActivateEq(eq);
289 if (eq>=0 && eq<20) {
290 if (!bPhysInit[eq]) { // this code is duplicated for the moment... (see also below)
291 TString fileName = Form("%s/SPDphys_run_%d_eq_%d.root",saveDirNoisyRef,runNr,eq);
292 physObj[eq] = new AliITSOnlineSPDphys(fileName.Data());
293 physObj[eq]->AddRunNr(runNr);
294 physObj[eq]->SetEqNr(eq);
298 UInt_t hs = str->GetHalfStaveNr();
299 // check that this hs is active in handler object
300 if (!(handler->IsActiveHS(eq,hs))) {
301 printf("SPD DA: Found HS (%d,%d) , previously inactive\n",eq,hs);
302 handler->ActivateHS(eq,hs);
304 UInt_t chip = str->GetChipAddr();
305 // check that this chip is active in handler object
306 if (!(handler->IsActiveChip(eq,hs,chip))) {
307 printf("SPD DA: Found Chip (%d,%d,%d) , previously inactive\n",eq,hs,chip);
308 handler->ActivateChip(eq,hs,chip);
310 physObj[eq]->IncrementHits(hs,chip,str->GetChipCol(),str->GetChipRow());
316 // check which eq and hs are active, for first event only
318 for (UInt_t eq=0; eq<20; eq++) {
319 // activate Eq and HSs in handler object
320 if (str->IsActiveEq(eq)) {
321 handler->ActivateEq(eq);
322 for (UInt_t hs=0; hs<6; hs++) {
323 if (str->IsActiveHS(eq,hs)) {
324 handler->ActivateHS(eq,hs);
325 for (UInt_t chip=0; chip<10; chip++) {
326 if (str->IsActiveChip(eq,hs,chip)) {
327 handler->ActivateChip(eq,hs,chip);
330 handler->ActivateChip(eq,hs,chip,kFALSE);
335 handler->ActivateHS(eq,hs,kFALSE);
338 if (!bPhysInit[eq]) { // this code is duplicated for the moment... (see also above)
339 TString fileName = Form("%s/SPDphys_run_%d_eq_%d.root",saveDirNoisyRef,runNr,eq);
340 physObj[eq] = new AliITSOnlineSPDphys(fileName.Data());
341 physObj[eq]->AddRunNr(runNr);
342 physObj[eq]->SetEqNr(eq);
347 handler->ActivateEq(eq,kFALSE);
353 for (UInt_t eq=0; eq<20; eq++) {
355 physObj[eq]->IncrementNrEvents();
373 printf("SPD DA: progress: %d\n",(unsigned int)( ((Float_t)(segNr-startSeg+1))/(argc-startSeg)*50 ));
377 // clean up phys objects (also saves them)
378 for (UInt_t eq=0; eq<20; eq++) {
379 if (physObj[eq]!=NULL) delete physObj[eq];
382 printf("SPD DA: %d events collected for this run.\n",eventNr);
387 // ********* STEP 2: Analyze phys container files. ************************************************
389 time_t timeStamp = time(NULL);
390 // printf("*** Start step2 , %d\n",time(NULL) - timeStamp);
392 UInt_t firstRunNrDead = runNr;
395 UInt_t nrEnoughStatNoisy = 0;
396 UInt_t nrEqActiveNoisy = 0;
397 Bool_t eqActiveNoisy[20];
399 // *** *** *** start loop over equipments (eq_id)
400 for (UInt_t eq=0; eq<20; eq++) {
401 eqActiveNoisy[eq] = kFALSE;
403 // create analyzer for this eq
404 TString fileName = Form("%s/SPDphys_run_%d_eq_%d.root",saveDirNoisyRef,runNr,eq);
405 AliITSOnlineSPDphysAnalyzer *noisyAnalyzer = new AliITSOnlineSPDphysAnalyzer(fileName.Data(),handler);
407 // check data in container
408 if (noisyAnalyzer->GetEqNr() != eq) {
409 if (noisyAnalyzer->GetEqNr() != 999) {
410 printf("SPD DA ERROR: Mismatching EqId in Container data and filename (%d!=%d). Skipping eq.\n",noisyAnalyzer->GetEqNr(),eq);
412 delete noisyAnalyzer;
417 eqActiveNoisy[eq] = kTRUE;
419 // configure analyzer with tuning parameters etc:
420 for (UInt_t i=0; i<nrTuningParams; i++) {
421 noisyAnalyzer->SetParam(((TObjString*)paramNames.At(i))->GetString().Data(),((TObjString*)paramVals.At(i))->GetString().Data());
424 printf("SPD DA: SPD phys STEP 2: Noisy search for eq %d\n",eq);
426 // search for noisy pixels:
427 nrEnoughStatNoisy += noisyAnalyzer->ProcessNoisyPixels();
429 // copy this phys obj to temporary dead reference dir to process after noisy search
430 TString fileNameDead = Form("%s/SPDphys_dead_run_0_0_eq_%d.root",saveDirDeadRefTmp,eq);
431 AliITSOnlineSPDphys* physObj = new AliITSOnlineSPDphys(fileNameDead.Data());
432 physObj->AddPhys(noisyAnalyzer->GetOnlinePhys());
433 if (physObj->GetNrRuns()>0) {
434 UInt_t firstRunNr = physObj->GetRunNr(0);
435 if (firstRunNrDead>firstRunNr) {
436 firstRunNrDead=firstRunNr;
439 // remove noisy pixels from dead hitmap
440 for (UInt_t hs=0; hs<6; hs++) {
441 for (UInt_t chip=0; chip<10; chip++) {
442 for (UInt_t ind=0; ind<handler->GetNrNoisyC(eq,hs,chip); ind++) {
443 UInt_t col = handler->GetNoisyColAtC(eq,hs,chip,ind);
444 UInt_t row = handler->GetNoisyRowAtC(eq,hs,chip,ind);
445 physObj->AddHits(hs,chip,col,row,-noisyAnalyzer->GetOnlinePhys()->GetHits(hs,chip,col,row));
451 delete noisyAnalyzer;
454 // daqDA_progressReport((unsigned int)((eq+1)*2.5));
455 printf("SPD DA: progress: %d , %ld\n",(unsigned int)(50+(eq+1)*2.5), time(NULL) - timeStamp);
457 // printf("SPD DA: progress: %d\n",(unsigned int)(50+(eq+1)*1.25));
458 printf("SPD DA: progress: %d , %ld\n",(unsigned int)(50+(eq+1)*1.25), time(NULL) - timeStamp);
461 // *** *** *** end loop over equipments (eq_id)
463 printf("SPD DA: Noisy search finished. %d noisy pixels found. %d chips had enough statistics.\n",
464 handler->GetNrNoisy(),nrEnoughStatNoisy);
465 handler->SetFileLocation(saveDirNoisyToFXS);
466 UInt_t nrNoisyFilesProduced = handler->WriteNoisyToFiles();
468 // save noisy to local OCDB
469 handler->WriteNoisyToDB(runNr,9999999,".");
470 // store local OCDB file in daq Det DB
471 TString ocdb_fileName = Form("./ITS/Calib/SPDNoisy/Run%d_9999999_v0_s0.root",runNr);
472 TString idod = "spd_noisy_ocdb";
473 Int_t ocdb_store_status = daqDA_DB_storeFile(ocdb_fileName.Data(),idod.Data());
474 // printf("daqDA_DB_storeFile(%s,%s)\n",ocdb_fileName.Data(),idod.Data());
475 if (ocdb_store_status) {
476 printf("SPD DA ERROR: Failed to store noisy ocdb file %s in daqDetDB: status=%d.\n",idod.Data(),ocdb_store_status);
484 UInt_t nrEnoughStatChips = 0;
485 UInt_t nrDeadChips = 0;
486 UInt_t nrInefficientChips = 0;
487 UInt_t nrEqActiveDead = 0;
488 Bool_t eqActiveDead[20];
490 // *** *** *** start loop over equipments (eq_id)
491 for (UInt_t eq=0; eq<20; eq++) {
492 eqActiveDead[eq] = kFALSE;
494 // setup analyzer for dead search
495 TString fileNameDead = Form("%s/SPDphys_dead_run_0_0_eq_%d.root",saveDirDeadRefTmp,eq);
496 AliITSOnlineSPDphys* physObj = new AliITSOnlineSPDphys(fileNameDead.Data());
497 AliITSOnlineSPDphysAnalyzer* deadAnalyzer = new AliITSOnlineSPDphysAnalyzer(physObj,handler);
498 // check data in container
499 if (deadAnalyzer->GetEqNr() != eq) {
500 if (deadAnalyzer->GetEqNr() != 999) {
501 printf("SPD DA ERROR: Mismatching EqId in Dead Container data and filename (%d!=%d). Skipping eq.\n",deadAnalyzer->GetEqNr(),eq);
504 nrDeadChips+=60; // since this eq is inactive...
509 eqActiveDead[eq] = kTRUE;
511 // configure analyzer with tuning parameters etc:
512 for (UInt_t i=0; i<nrTuningParams; i++) {
513 deadAnalyzer->SetParam(((TObjString*)paramNames.At(i))->GetString().Data(),((TObjString*)paramVals.At(i))->GetString().Data());
516 UInt_t nrEventsCollected = physObj->GetNrEvents();
517 printf("SPD DA: SPD phys STEP 2: Dead search for eq %d (%d events)\n",eq,nrEventsCollected);
519 // search for dead pixels:
520 nrEnoughStatChips += deadAnalyzer->ProcessDeadPixels();
521 nrDeadChips += deadAnalyzer->GetNrDeadChips();
522 nrInefficientChips += deadAnalyzer->GetNrInefficientChips();
528 // daqDA_progressReport((unsigned int)(50+(eq+1)*2.5));
529 printf("SPD DA: progress: %d , %ld\n",(unsigned int)(50+(eq+1)*2.5), time(NULL) - timeStamp);
531 // printf("SPD DA: progress: %d\n",(unsigned int)(75+(eq+1)*1.25));
532 printf("SPD DA: progress: %d , %ld\n",(unsigned int)(75+(eq+1)*1.25), time(NULL) - timeStamp);
535 // *** *** *** end loop over equipments (eq)
540 printf("SPD DA: Dead search finished.\n");
541 printf("SPD DA: %d single dead pixels , %d dead or inactive pixels in total.\n",handler->GetNrDead(),handler->GetNrSilent());
542 printf("SPD DA: %d chips had enough statistics. %d chips are dead. %d chips are inefficient.\n",nrEnoughStatChips,nrDeadChips,nrInefficientChips);
543 handler->SetFileLocation(saveDirDead);
544 handler->WriteSilentToFilesAlways();
545 handler->SetFileLocation(saveDirDeadToFXS);
546 handler->WriteSilentToFilesAlways();
549 // printf("SPD DA: Opening id list file\n");
550 printf("SPD DA: Opening id list file , %ld\n",time(NULL) - timeStamp);
551 TString idsFXSFileName = Form("%s/FXSids_run_%d.txt",saveDirIdsToFXS,runNr);
553 idsFXSfile.open(idsFXSFileName.Data());
556 // store dead+inactive pixels in DB, used as starting point for later runs
558 printf("store previous dead in DB , %ld\n",time(NULL) - timeStamp);
559 for (UInt_t eq=0; eq<20; eq++) {
560 Int_t storePreviousDead_status = 0;
561 TString idpd = Form("spd_previous_dead_%d",eq);
562 TString fileName = Form("%s/SPD_Dead_%d.root",saveDirDead,eq);
563 storePreviousDead_status = daqDA_DB_storeFile(fileName.Data(),idpd.Data());
564 // printf("daqDA_DB_storeFile(%s,%s)\n",fileName.Data(),idpd.Data());
565 if (storePreviousDead_status) {
566 printf("SPD DA ERROR: Failed to store dead file %s in daqDetDB: status=%d.\n",idpd.Data(),storePreviousDead_status);
572 // send (dead) reference data for this run to FXS - only if there is no chip in category "needsMoreStat"
573 if (nrEnoughStatChips>0 && nrEnoughStatChips+nrDeadChips+nrInefficientChips == 1200) {
574 printf("SPD DA: Dead calibration is complete.\n");
575 printf("SPD DA: Preparing dead reference data\n");
576 // send reference data for dead pixels to FXS
577 TString tarFiles = "";
578 for (UInt_t eq=0; eq<20; eq++) {
579 if (eqActiveDead[eq]) {
580 printf("SPD DA: Preparing dead pixels for eq %d\n",eq);
581 // move file to ref dir
582 TString fileName = Form("%s/SPDphys_dead_run_0_0_eq_%d.root",saveDirDeadRefTmp,eq);
583 TString newFileName = Form("%s/SPDphys_dead_run_%d_%d_eq_%d.root",saveDirDeadRef,firstRunNrDead,runNr,eq);
584 TString command = Form("mv -f %s %s",fileName.Data(),newFileName.Data());
585 system(command.Data());
586 tarFiles.Append(Form("SPDphys_dead_run_%d_%d_eq_%d.root ",firstRunNrDead,runNr,eq));
587 // create empty hitmap file to send to DB later
588 AliITSOnlineSPDphys* physObj = new AliITSOnlineSPDphys(fileName.Data());
589 physObj->SetEqNr(eq);
593 if (tarFiles.Length() > 0) { // make sure there are some files to send
594 TString send_command = Form("cd %s; tar -cf ref_phys_dead.tar %s",saveDirDeadRef,tarFiles.Data());
595 system(send_command.Data());
596 TString fileName = Form("%s/ref_phys_dead.tar",saveDirDeadRef);
597 TString id = "SPD_ref_phys_dead";
599 status = daqDA_FES_storeFile(fileName.Data(),id.Data());
601 printf("SPD DA ERROR: Failed to export file %s , status %d\n",fileName.Data(),status);
605 idsFXSfile << Form("%s\n",id.Data());
609 // store hitmaps (maybe empty) in DB, used as starting point for later runs:
611 printf("store previous hitmaps in DB , %ld\n",time(NULL) - timeStamp);
612 for (UInt_t eq=0; eq<20; eq++) {
613 Int_t storePreviousHitmap_status = 0;
614 TString idph = Form("spd_previous_hitmap_%d",eq);
615 TString fileName = Form("%s/SPDphys_dead_run_0_0_eq_%d.root",saveDirDeadRefTmp,eq);
616 storePreviousHitmap_status = daqDA_DB_storeFile(fileName.Data(),idph.Data());
617 // printf("daqDA_DB_storeFile(%s,%s)\n",fileName.Data(),idph.Data());
618 if (storePreviousHitmap_status) {
619 printf("SPD DA ERROR: Failed to store hitmap file %s in daqDetDB: status=%d.\n",idph.Data(),storePreviousHitmap_status);
626 // send (noisy) reference data for this run to FXS
627 // printf("SPD DA: Preparing physics reference data for this run\n");
628 printf("SPD DA: Preparing physics reference data for this run , %ld\n",time(NULL) - timeStamp);
629 TString tarFiles = "";
630 for (UInt_t eq=0; eq<20; eq++) {
631 if (eqActiveNoisy[eq]) {
632 tarFiles.Append(Form("SPDphys_run_%d_eq_%d.root ",runNr,eq));
635 if (tarFiles.Length() > 0) { // make sure there are any files to send
636 TString send_command = Form("cd %s; tar -cf ref_phys.tar %s",saveDirNoisyRef,tarFiles.Data());
637 system(send_command.Data());
638 TString fileName = Form("%s/ref_phys.tar",saveDirNoisyRef);
639 TString id = "SPD_ref_phys";
641 status = daqDA_FES_storeFile(fileName.Data(),id.Data());
643 printf("SPD DA ERROR: Failed to export file %s , status %d\n",fileName.Data(),status);
647 idsFXSfile << Form("%s\n",id.Data());
652 // send dead pixels to FXS
653 // printf("SPD DA: Preparing dead files for FXS\n");
654 printf("SPD DA: Preparing dead files for FXS , %ld\n",time(NULL) - timeStamp);
655 // send a tared file of all the dead files
656 TString send_command = Form("cd %s; tar -cf dead_phys.tar *",saveDirDeadToFXS);
657 // printf("\n\n%s\n\n",command.Data());
658 system(send_command.Data());
659 TString fileName = Form("%s/dead_phys.tar",saveDirDeadToFXS);
660 TString id = "SPD_phys_dead";
662 Int_t send_status = daqDA_FES_storeFile(fileName.Data(),id.Data());
663 if (send_status!=0) {
664 printf("SPD DA ERROR: Failed to export file %s , status %d\n",fileName.Data(),send_status);
668 idsFXSfile << Form("%s\n",id.Data());
672 // send noisy pixels to FXS
673 if (nrNoisyFilesProduced > 0) { // make sure there is at least one file created
674 // printf("SPD DA: Preparing noisy files for FXS\n");
675 printf("SPD DA: Preparing noisy files for FXS , %ld\n",time(NULL) - timeStamp);
676 // send a tared file of all the noisy files
677 TString command = Form("cd %s; tar -cf noisy_phys.tar *",saveDirNoisyToFXS);
678 // printf("\n\n%s\n\n",command.Data());
679 system(command.Data());
680 TString fileName = Form("%s/noisy_phys.tar",saveDirNoisyToFXS);
681 TString id = "SPD_phys_noisy";
683 status = daqDA_FES_storeFile(fileName.Data(),id.Data());
685 printf("SPD DA ERROR: Failed to export file %s , status %d\n",fileName.Data(),status);
689 idsFXSfile << Form("%s\n",id.Data());
694 // send ids file to FXS
698 status = daqDA_FES_storeFile(idsFXSFileName.Data(),id.Data());
700 printf("SPD DA ERROR: Failed to export file %s , status %d\n",idsFXSFileName.Data(),status);
710 printf("SPD DA: End of all operations, %d errors, %ld\n", nrErrors, time(NULL) - timeStamp);
712 if (nrErrors>0) return -1;