#include <TObject.h>
#include "AliTRDltuParam.h"
-
-class AliTRDtrapConfig;
+#include "AliTRDCalOnlineGainTable.h"
+#include "AliTRDtrapConfig.h"
class AliTRDtrapConfigHandler : public TObject {
public:
- AliTRDtrapConfigHandler();
+ AliTRDtrapConfigHandler(AliTRDtrapConfig *cfg);
virtual ~AliTRDtrapConfigHandler();
+ void Init(); // Set DMEM allocation modes
void ResetMCMs(); // Reset all trap registers and DMEM of the MCMs
Int_t LoadConfig(); // load a default configuration suitable for simulation
Int_t LoadConfig(TString filename); // load a TRAP configuration from a file
+ Int_t SetGaintable(AliTRDCalOnlineGainTable const >bl); // Set a gain table to correct Q0 and Q1 for PID
void ProcessLTUparam(Int_t dest, Int_t addr, UInt_t data); // Process the LTU parameters
void PrintGeoTest(); // Prints some information about the geometry. Only for debugging
// Int_t poke(Int_t rob, Int_t mcm, Int_t addr, UInt_t value); // not implemented yet
private:
+ Bool_t AddValues(UInt_t det, UInt_t cmd, UInt_t extali, Int_t addr, UInt_t data);
+
void ConfigureDyCorr(Int_t det); // deflection length correction due to Lorentz angle and tilted pad correction
void ConfigureDRange(Int_t det); // deflection range LUT, range calculated according to B-field (in T) and pt_min (in GeV/c)
void ConfigureNTimebins(Int_t det); // timebins in the drift region
void ConfigurePIDcorr(Int_t det); // Calculate the mcm individual correction factors for the PID
- Double_t Square(Double_t val) { return val*val; }; // returns the square of a given number
+ Double_t Square(Double_t val) const { return val*val; }; // returns the square of a given number
AliTRDtrapConfigHandler(const AliTRDtrapConfigHandler &h); // not implemented
AliTRDtrapConfigHandler &operator=(const AliTRDtrapConfigHandler &h); // not implemented
- static const UInt_t fgkScsnCmdWrite=10; // SCSN command for the write command
- static const UInt_t fgkScsnCmdRestr=18; // SCSN command to restrict commands to specified chambers
- static const UInt_t fgkScsnLTUparam=27; // extended SCSN command for the LTU configuration
+ static const UInt_t fgkScsnCmdReset=6; // SCSN command for reset
+ static const UInt_t fgkScsnCmdPause=8; // SCSN command to pause
+ static const UInt_t fgkScsnCmdRead=9; // SCSN command to read
+ static const UInt_t fgkScsnCmdWrite=10; // SCSN command to write
+ static const UInt_t fgkScsnCmdPtrg=12; // SCSN command for pretrigger
+ static const UInt_t fgkScsnCmdRobPower=16; // SCSN command to switch ROB power
+ static const UInt_t fgkScsnCmdRobReset=17; // SCSN command for ROB reset
+
+ static const UInt_t fgkScsnCmdRestr=18; // SCSN command to restrict commands to specified chambers
+ static const UInt_t fgkScsnCmdTtcRx=19; // SCSN command to configure TTCrx
+ static const UInt_t fgkScsnCmdHwPtrg=20; // SCSN command to issue pretrigger pulse
+ static const UInt_t fgkScsnCmdSetHC=22; // SCSN command to set HC ID
+ static const UInt_t fgkScsnCmdMcmTemp=24; // SCSN command for MCM temperature sensors
+ static const UInt_t fgkScsnCmdPM=25; // SCSN command for patchmaker
+ static const UInt_t fgkScsnCmdOri=26; // SCSN command for ORI configuration
+ static const UInt_t fgkScsnLTUparam=27; // extended SCSN command for the LTU configuration
static const Int_t fgkMCMperROBCol = 4; // MCMs per ROB column
static const Int_t fgkPadsPerMCM = 18; // readout pads per MCM
static const Int_t fgkMCMperROBRow = 4; // MCMs per ROB row
+ static const Int_t fgkMaxLinkPairs=4; // number of linkpairs used during configuration
+ static const Int_t fgkMcmlistSize=256; // list of MCMs to which a value has to be written
+
AliTRDltuParam ltuParam; // ltuParam class for the actual calculation of the parameters
UInt_t fRestrictiveMask; // mask to restrict subsequent commands to specified chambers
+ AliTRDtrapConfig *fTrapConfig; // pointer to TRAP config in use
+ AliTRDCalOnlineGainTable fGtbl; // gain table
+
ClassDef(AliTRDtrapConfigHandler,0)
};