ACORDE/AliACORDEv1.cxx

   1 /**************************************************************************
   2  * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
   3  *                                                                        *
   4  * Author: The ALICE Off-line Project.                                    *
   5  * Contributors are mentioned in the code where appropriate.              *
   6  *                                                                        *
   7  * Permission to use, copy, modify and distribute this software and its   *
   8  * documentation strictly for non-commercial purposes is hereby granted   *
   9  * without fee, provided that the above copyright notice appears in all   *
  10  * copies and that both the copyright notice and this permission notice   *
  11  * appear in the supporting documentation. The authors make no claims     *
  12  * about the suitability of this software for any purpose. It is          *
  13  * provided "as is" without express or implied warranty.                  *
  14  **************************************************************************/
  15
  16 /* $Id: AliACORDEv1.cxx,v 1.2 2007/12/03 08:40:00 hristov Exp $ */
  17
  18 ///////////////////////////////////////////////////////////////////////////////
  19 //                                                                           //
  20 // ALICE Cosmic Ray Trigger                                                  //
  21 //                                                                           //
  22 //  This class contains the functions for final version of the ALICE Cosmic  //
  23 //  Ray Trigger. This version will be used to simulation comic rays in alice //
  24 //  with all the detectors.                                                  //
  25 //  It include geometry and hits (position and momentum)                     //
  26 //                                                                           //
  27 //                  Send comments to:                                        //
  28 //                                                                           //
  29 //      Arturo Fernandez Tellez         <afernand@fcfm.buap.mx>              //
  30 //      Eleazar Cuautle Flores          <ecuautle@nucleares.unam.mx>         //
  31 //      Mario Rodriguez Cahuantzi       <mrodrigu@mail.cern.ch>              //
  32 //                                                                           //
  33 //                      Puebla, Pue. Mexico December 2007                    //
  34 //                                                                           //
  35 //      Last Update: Aug. 4th 2008                                           //
  36 ///////////////////////////////////////////////////////////////////////////////
  37
  38
  39 #include <Riostream.h>
  40 #include <TGeoMatrix.h>
  41 #include <TMath.h>
  42 #include <TString.h>
  43 #include <TSystem.h>
  44
  45 #include "AliConst.h"
  46 #include "AliRun.h"
  47
  48 #include "TGeoManager.h"
  49 #include "TGeoVolume.h"
  50 #include "TGeoPcon.h"
  51 #include "TGeoPgon.h"
  52 #include "TGeoTrd1.h"
  53 #include "TGeoCompositeShape.h"
  54 #include "TGeoPara.h"
  55
  56 #include "AliACORDEv1.h"
  57 #include <TClonesArray.h>
  58 #include <TLorentzVector.h>
  59 #include <TVirtualMC.h>
  60 #include <TPDGCode.h>
  61
  62 #include "AliRun.h"
  63 #include "AliConst.h"
  64 #include "AliACORDEhit.h"
  65 #include "AliACORDEConstants.h"
  66 #include "AliMC.h"
  67 #include "AliLog.h"
  68
  69 ClassImp(AliACORDEv1)
  70
  71 //_____________________________________________________________________________
  72 AliACORDEv1::AliACORDEv1()
  73   : AliACORDE()
  74 {
  75   //
  76   // Default constructor
  77   fIshunt = 0;
  78   fHits = 0;
  79   //
  80 }
  81 //_____________________________________________________________________________
  82 AliACORDEv1::AliACORDEv1(const char *name, const char *title)
  83   : AliACORDE(name, title)
  84 {
  85   //
  86   // Standard constructor
  87   //
  88   fIshunt = 1; // All hits are associated with primary particles
  89   fHits =  new TClonesArray("AliACORDEhit",400);
  90   gAlice->GetMCApp()->AddHitList(fHits);
  91 }
  92 //_____________________________________________________________________________
  93 AliACORDEv1::~AliACORDEv1()
  94 {
  95   //
  96   // Default destructor
  97   //
  98 }
  99 //_____________________________________________________________________________
 100 void AliACORDEv1::CreateGeometry()
 101 {
 102   CreateAcorde();
 103 }
 104 void AliACORDEv1::CreateAcorde()
 105 {
 106
 107
 108   //  _______________________________________________________________________________
 109   // |                                                                               |
 110   // |                                                                               |
 111   // |  **** Acorde's Geometry using the TGeo Class....January 2008 ****             |
 112   // |                                                                               |
 113   // |          ACORDE--> Volume for ACORDE in Alice's Magnet                        |
 114   // |          ACORDE1_a--> Volume for frame of Acorde's Module                     |
 115   // |          ACORDE10--> Volume for frame of Acorde's Module                      |
 116   // |          ACORDE2--> Volume for scintillators in Acorde's Module               |
 117   // |          ACORDE7--> Volume for bars                                           |
 118   // |          ACORDE7_1--> Volume for side's bars                                  |
 119   // |          ACORDE8--> Volume for supports                                       |
 120   // |          ACORDE9--> Volume for supports                                       |
 121   // |          ACORDE_SUPPORT--> Volume that contains a full Acorde's support       |
 122   // |          ALL_ACORDE_MODULES--> Volume that contains ALL Acorde's module       |
 123   // |          ACORDE_MODULE--> Volume that represents ONE Acorde-Module            |
 124   // |          ACORDE_1--> Volume that contains the bars&supports in-face           |
 125   // |          ACORDE_2--> Volume that contains the bars&supports up-face           |
 126   // |          ACORDE_3--> Volume that contains the bars&supports out-face          |
 127   // |                                                                               |
 128   // |_______________________________________________________________________________|
 129
 130
 131         // Call the global constants for the Modules
 132
 133         AliACORDEConstants* constants = AliACORDEConstants::Instance();
 134
 135         // Get the Alice Volume
 136
 137         TGeoVolume *alice = gGeoManager->GetVolume("ALIC");
 138
 139         // Define some materials & medium
 140
 141         //*** Support & Bars***
 142
 143         TGeoMedium* al    = gGeoManager->GetMedium("ACORDE_ALU_C0");
 144         TGeoMedium* med6  = gGeoManager->GetMedium("ACORDE_CPV scint.1");
 145
 146         //Define a FULL-ACORDE-VOLUME
 147
 148         TGeoVolume *aCORDE = new TGeoVolumeAssembly("ACORDE");
 149
 150
 151         // Define 6 master volumes for ACORDE
 152
 153         TGeoVolume *inFace = new TGeoVolumeAssembly("ACORDE_1");
 154         TGeoVolume *upFace = new TGeoVolumeAssembly("ACORDE_2");
 155         TGeoVolume *outFace = new TGeoVolumeAssembly("ACORDE_3");
 156         TGeoVolume *modules = new TGeoVolumeAssembly("ALL_ACORDE_MODULES");
 157
 158         // Define global variables
 159
 160         Float_t box[3];
 161         Int_t count;
 162         Float_t dy=10;//-->displacement of the support and bars of ACORDE
 163         Float_t dy2=66.5;//-->displacement of the support and bars of ACORDE
 164         Float_t placedAt;
 165         Float_t small=0.05;
 166
 167         // Define the position of support and bars for the sides faces
 168
 169         Float_t des = 22*0.7071;
 170
 171         // Define rotation Matrix for Side's faces in Alice
 172
 173         TGeoRotation *idrotm231 = new TGeoRotation("idrotm231",90, 45, 90, 135, 0, 0);
 174         TGeoRotation *idrotm232 = new TGeoRotation("idrotm232",90, 315, 90, 45, 0, 0);
 175
 176         // Begin the Geometry of the structure for ACORDE
 177
 178         // *** Definition of ACORDE's Modules ***
 179
 180         // Define Measures of ACORDE's Modules
 181
 182         box[0] = constants->ModuleLength()/2;
 183         box[1] = constants->ModuleHeight()/2;
 184         box[2] = constants->ModuleWidth()/2;
 185
 186         // Define Measures of Scintillators
 187
 188         Float_t pbox[3];
 189         pbox[0] = constants->PlasticLength()/2;
 190         pbox[1] = constants->PlasticHeight()/2;
 191         pbox[2] = constants->PlasticWidth()/2;
 192
 193
 194         // Create the Modules, Scintillators & Metallic Frame
 195
 196         //*** Aluminium frame ***
 197
 198         TGeoBBox *acorde1 = new TGeoBBox("acorde1",box[0],box[1],26/20+2);
 199         TGeoBBox *acorde10 = new TGeoBBox("acorde10",26/20,box[1],box[2]+3);
 200         TGeoVolume *aCORDE1qa = new TGeoVolume("ACORDE1_a",acorde1,al);
 201         TGeoVolume *aCORDE10 = new TGeoVolume("ACORDE10",acorde10,al);
 202
 203         //*** Scintillators ***
 204
 205         TGeoBBox *acorde2 = new TGeoBBox("acorde2",pbox[0],pbox[1],pbox[2]);
 206         TGeoVolume *aCORDE2 = new TGeoVolume("ACORDE2",acorde2,med6);
 207
 208
 209         // Here I define & construct a Master Volume ("ACORDE_MODULE") for one Module in ACORDE
 210
 211         TGeoVolume *acomodule = new TGeoVolumeAssembly("ACORDE_MODULE");
 212         acomodule->AddNode(aCORDE1qa,1,new TGeoTranslation("aco1",0,0,13));
 213         acomodule->AddNode(aCORDE1qa,2,new TGeoTranslation("aco10",0,0,-13));
 214         acomodule->AddNode(aCORDE10,3,new TGeoTranslation("aco10",293/2+5,0,0));
 215         acomodule->AddNode(aCORDE10,4,new TGeoTranslation("aco10",-293/2-5,0,0));
 216         placedAt = pbox[1]+constants->ProfileThickness()-constants->ModuleHeight()/2+small;
 217         acomodule->AddNode(aCORDE2,5,new TGeoTranslation("aco2",placedAt,0,0));
 218         placedAt = placedAt + 2.0*pbox[1]+small;
 219         acomodule->AddNode(aCORDE2,6,new TGeoTranslation("aco2",placedAt,-1,0));
 220
 221         // Put the Modules of In-Face
 222
 223         count=1;
 224         for(Int_t i=1;i<9;i++){
 225
 226                 Float_t posx = constants->ModulePositionX(i);
 227                 Float_t posy = constants->ModulePositionY(i);
 228                 Float_t posz = constants->ModulePositionZ(i);
 229                 Int_t moduleElectronicID = constants->ModuleElectronicChannel(i);
 230
 231                 modules->AddNode(acomodule,moduleElectronicID,
 232                         new TGeoCombiTrans("aco01",posx,posy,posz,idrotm232));
 233                 count++;
 234
 235         }
 236
 237         count=9;
 238         for(Int_t i=10;i<20;i++){
 239                 Float_t posx = constants->ModulePositionX(i);
 240                 Float_t posy = constants->ModulePositionY(i);
 241                 Float_t posz = constants->ModulePositionZ(i);
 242                 Int_t moduleElectronicID = constants->ModuleElectronicChannel(i);
 243
 244                 modules->AddNode(acomodule,moduleElectronicID,
 245                         new TGeoCombiTrans("aco01",posx,posy,posz,idrotm232));
 246         }
 247
 248         // Put he Modules of Up-Face
 249
 250         count=1;
 251         for(Int_t i=20;i<40;i++){
 252                 Float_t posx = constants->ModulePositionX(i);
 253                 Float_t posy = constants->ModulePositionY(i);
 254                 Float_t posz = constants->ModulePositionZ(i);
 255                 Int_t moduleElectronicID = constants->ModuleElectronicChannel(i);
 256
 257                 modules->AddNode(acomodule,moduleElectronicID,new TGeoTranslation("aco01",posx,posy,posz));
 258                 count++;
 259         }
 260
 261         // Put the Modules of Out-Face
 262
 263         count=1;
 264         for(Int_t i=40;i<50;i++){
 265                 Float_t posx = constants->ModulePositionX(i);
 266                 Float_t posy = constants->ModulePositionY(i);
 267                 Float_t posz = constants->ModulePositionZ(i);
 268                 Int_t moduleElectronicID = constants->ModuleElectronicChannel(i);
 269
 270                 modules->AddNode(acomodule,moduleElectronicID,
 271                         new TGeoCombiTrans("aco01",posx,posy,posz,idrotm231));
 272                 count++;
 273         }
 274
 275         // Put the Modules of Out-Face
 276
 277         count=11;
 278         for(Int_t i=51;i<59;i++){
 279                 Float_t posx = constants->ModulePositionX(i);
 280                 Float_t posy = constants->ModulePositionY(i);
 281                 Float_t posz = constants->ModulePositionZ(i);
 282                 Int_t moduleElectronicID = constants->ModuleElectronicChannel(i);
 283
 284         if ((i==57) || (i==56)){
 285                  modules->AddNode(acomodule,moduleElectronicID,
 286                                         new TGeoCombiTrans("aco01",posx,posy,posz,idrotm231));
 287         }else{
 288                 modules->AddNode(acomodule,moduleElectronicID,
 289                         new TGeoCombiTrans("aco01",posx,posy,posz,idrotm231));
 290                 }count++;
 291         }
 292
 293
 294         // Put th Modules ITS-ACORDE
 295
 296         if (GetITSGeometry()) {
 297
 298                 modules->AddNode(acomodule,constants->ModuleElectronicChannel(50),new TGeoTranslation("ITS-3",
 299                                 constants->ExtraModulePositionX(),
 300                                 constants->ExtraModulePositionY(),
 301                                 constants->ExtraModulePositionZ(0)));
 302
 303                 modules->AddNode(acomodule,constants->ModuleElectronicChannel(59),new TGeoTranslation("ITS-4",
 304                                 constants->ExtraModulePositionX(),
 305                                 constants->ExtraModulePositionY(),
 306                                 constants->ExtraModulePositionZ(1)));
 307
 308                 modules->AddNode(acomodule,constants->ModuleElectronicChannel(0),new TGeoTranslation("ITS-1",
 309                                 constants->ExtraModulePositionX(),
 310                                 constants->ExtraModulePositionY(),
 311                                 constants->ExtraModulePositionZ(2)));
 312
 313                 modules->AddNode(acomodule,constants->ModuleElectronicChannel(9),new TGeoTranslation("ITS-2",
 314                                 constants->ExtraModulePositionX(),
 315                                 constants->ExtraModulePositionY(),
 316                                 constants->ExtraModulePositionZ(3)));
 317
 318
 319                 }
 320         else {
 321
 322
 323                 modules->AddNode(acomodule,61,new TGeoTranslation("its1",
 324                                 constants->ModulePositionX(0),
 325                                 constants->ModulePositionY(0),
 326                                 constants->ModulePositionZ(0)));
 327
 328                 modules->AddNode(acomodule,62,new TGeoTranslation("its2",
 329                                 constants->ModulePositionX(9),
 330                                 constants->ModulePositionY(9),
 331                                 constants->ModulePositionZ(9)));
 332
 333                 modules->AddNode(acomodule,63,new TGeoTranslation("its3",
 334                                 constants->ModulePositionX(50),
 335                                 constants->ModulePositionY(50),
 336                                 constants->ModulePositionZ(50)));
 337
 338                 modules->AddNode(acomodule,64,new TGeoTranslation("its4",
 339                                 constants->ModulePositionX(59),
 340                                 constants->ModulePositionY(59),
 341                                 constants->ModulePositionZ(59)));
 342
 343                 } // end if (fITSGeometry)
 344
 345
 346
 347         //*** Begin the structure of support & bars for ACORDE ***
 348
 349         // Define a volume for the bars (up-face)
 350
 351         box[0]=5;
 352 //      box[1]=40;
 353         box[1]=33;
 354         box[2]=5;
 355         Float_t z1 = 21 ;
 356         TGeoBBox *acorde00 = new TGeoBBox("acorde00",box[0],box[1],box[2]);
 357
 358         TGeoVolume *aCORDE00 = new TGeoVolume("ACORDE00",acorde00,al);
 359
 360         count=25;
 361         for (Int_t ma=20;ma<=24;ma++)
 362         {
 363                 TGeoTranslation *aco00=new TGeoTranslation("aco00",
 364                                         constants->SupportModulePositionX(ma)-0.5*293+dy2,
 365                                         constants->SupportModulePositionY(ma)-box[1]-z1,
 366                                         constants->SupportModulePositionZ(ma));
 367
 368                 upFace->AddNode(aCORDE00,count,aco00);
 369
 370                 TGeoTranslation *aco00q1=new TGeoTranslation("aco00q1",
 371                                         -(constants->SupportModulePositionX(ma)-0.5*293+dy2),
 372                                         constants->SupportModulePositionY(ma)-box[1]-z1,
 373                                         constants->SupportModulePositionZ(ma));
 374                 upFace->AddNode(aCORDE00,count+1,aco00q1);
 375
 376                 TGeoTranslation *aco00q2=new TGeoTranslation("aco00q2",
 377                                         constants->SupportModulePositionX(ma)+0.5*293-dy2,
 378                                         constants->SupportModulePositionY(ma)-box[1]-z1,
 379                                         constants->SupportModulePositionZ(ma));
 380                 upFace->AddNode(aCORDE00,count+2,aco00q2);
 381
 382                 TGeoTranslation *aco00q3=new TGeoTranslation("aco00q3",
 383                                         -(constants->SupportModulePositionX(ma)+0.5*293-dy2),
 384                                         constants->SupportModulePositionY(ma)-box[1]-z1,
 385                                         constants->SupportModulePositionZ(ma));
 386                 upFace->AddNode(aCORDE00,count+3,aco00q3);
 387                 count=count+4;
 388
 389                 ma++;
 390         }
 391
 392         count=41;
 393         for(Int_t ma=25;ma<=29;ma++)
 394         {
 395                 TGeoTranslation *aco00=new TGeoTranslation("aco00",
 396                                         constants->SupportModulePositionX(ma)-0.5*293+dy2,
 397                                         constants->SupportModulePositionY(ma)-box[1]-z1,
 398                                         constants->SupportModulePositionZ(ma));
 399                 upFace->AddNode(aCORDE00,count,aco00);
 400
 401                 TGeoTranslation *aco00q1=new TGeoTranslation("aco00q1",
 402                                         -(constants->SupportModulePositionX(ma)-0.5*293+dy2),
 403                                         constants->SupportModulePositionY(ma)-box[1]-z1,
 404                                         constants->SupportModulePositionZ(ma));
 405                 upFace->AddNode(aCORDE00,count+1,aco00q1);
 406
 407                 TGeoTranslation *aco00q2=new TGeoTranslation("aco00q2",
 408                                         constants->SupportModulePositionX(ma)+0.5*293-dy2,
 409                                         constants->SupportModulePositionY(ma)-box[1]-z1,
 410                                         constants->SupportModulePositionZ(ma));
 411                 upFace->AddNode(aCORDE00,count+2,aco00q2);
 412
 413                 TGeoTranslation *aco00q3=new TGeoTranslation("aco00q3",
 414                                         -(constants->SupportModulePositionX(ma)+0.5*293-dy2),
 415                                         constants->SupportModulePositionY(ma)-box[1]-z1,
 416                                         constants->SupportModulePositionZ(ma));
 417                 upFace->AddNode(aCORDE00,count+3,aco00q3);
 418                 count=count+4;
 419                 ma++;
 420         }
 421
 422         TGeoTranslation *c1 = new TGeoTranslation ("c1",
 423                                 constants->SupportModulePositionX(20)-0.5*293,
 424                                 constants->SupportModulePositionY(20)-box[1]-z1,
 425                                 constants->SupportModulePositionZ(20)-40);
 426         TGeoTranslation *c2 = new TGeoTranslation ("c2",
 427                                 constants->SupportModulePositionX(23)-0.5*293,
 428                                 constants->SupportModulePositionY(23)-box[1]-z1,
 429                                 constants->SupportModulePositionZ(23)-40);
 430         TGeoTranslation *c3 = new TGeoTranslation ("c3",
 431                                 constants->SupportModulePositionX(24)-0.5*293,
 432                                 constants->SupportModulePositionY(24)-box[1]-z1,
 433                                 constants->SupportModulePositionZ(25)-40);
 434         TGeoTranslation *c4 = new TGeoTranslation ("c4",
 435                                 constants->SupportModulePositionX(27)-0.5*293,
 436                                 constants->SupportModulePositionY(27)-box[1]-z1,
 437                                 constants->SupportModulePositionZ(28)-40);
 438         upFace->AddNode(aCORDE00,57,c1);
 439         upFace->AddNode(aCORDE00,58,c2);
 440         upFace->AddNode(aCORDE00,59,c3);
 441         upFace->AddNode(aCORDE00,60,c4);
 442
 443
 444         // Construct Bars for lateral supports (up-face)
 445
 446         TGeoTranslation *aco00=new TGeoTranslation("aco00",
 447                                 constants->SupportModulePositionX(20)+0.5*293-dy,
 448                                 constants->SupportModulePositionY(20)-box[1]-z1,
 449                                 constants->SupportModulePositionZ(20)-40);
 450         upFace->AddNode(aCORDE00,61,aco00);
 451
 452         TGeoTranslation *aco00q1=new TGeoTranslation("aco00q1",
 453                                 constants->SupportModulePositionX(23)+0.5*293-dy,
 454                                 constants->SupportModulePositionY(23)-box[1]-z1,
 455                                 constants->SupportModulePositionZ(23)-40);
 456         upFace->AddNode(aCORDE00,62,aco00q1);
 457
 458         TGeoTranslation *aco00q2=new TGeoTranslation("aco00q2",
 459                                 constants->SupportModulePositionX(24)+0.5*293-dy,
 460                                 constants->SupportModulePositionY(24)-box[1]-z1,
 461                                 constants->SupportModulePositionZ(25)-40);
 462         upFace->AddNode(aCORDE00,63,aco00q2);
 463
 464         TGeoTranslation *aco00q3=new TGeoTranslation("aco00q3",
 465                                 constants->SupportModulePositionX(27)+0.5*293-dy,
 466                                 constants->SupportModulePositionY(27)-box[1]-z1,
 467                                 constants->SupportModulePositionZ(28)-40);
 468         upFace->AddNode(aCORDE00,64,aco00q3);
 469
 470
 471         TGeoTranslation *aco01=new TGeoTranslation("aco01",
 472                                 constants->SupportModulePositionX(30)-0.5*293+dy,
 473                                 constants->SupportModulePositionY(30)-box[1]-z1,
 474                                 constants->SupportModulePositionZ(30)-40);
 475         upFace->AddNode(aCORDE00,65,aco01);
 476
 477         TGeoTranslation *aco01q1=new TGeoTranslation("aco01q1",
 478                                 constants->SupportModulePositionX(33)-0.5*293+dy,
 479                                 constants->SupportModulePositionY(33)-box[1]-z1,
 480                                 constants->SupportModulePositionZ(33)-40);
 481         upFace->AddNode(aCORDE00,66,aco01q1);
 482
 483         TGeoTranslation *aco01q2=new TGeoTranslation("aco01q2",
 484                                 constants->SupportModulePositionX(34)-0.5*293+dy,
 485                                 constants->SupportModulePositionY(34)-box[1]-z1,
 486                                 constants->SupportModulePositionZ(35)-40);
 487         upFace->AddNode(aCORDE00,67,aco01q2);
 488
 489         TGeoTranslation *aco01q3=new TGeoTranslation("aco01q3",
 490                                 constants->SupportModulePositionX(37)-0.5*293+dy,
 491                                 constants->SupportModulePositionY(37)-box[1]-z1,
 492                                 constants->SupportModulePositionZ(38)-40);
 493         upFace->AddNode(aCORDE00,68,aco01q3);
 494
 495
 496
 497         // Acorde's support bars (side's faces)
 498
 499         //*** In Face ***
 500
 501 //      box[0]=39;
 502         box[0]=27;
 503         box[1]=5;
 504         box[2]=5;
 505         Float_t kro=3;
 506         Float_t q1=0;
 507         Float_t posx=constants->SupportModulePositionX(0)+0.5*293*0.7071-56*0.7071-18;
 508         Float_t posy=constants->SupportModulePositionY(0)-0.5*293*0.7071-56*0.7071+3-q1+kro;
 509         Float_t posz=constants->SupportModulePositionZ(0);
 510
 511         TGeoBBox *acorde7 = new TGeoBBox("acorde7",box[0],box[1],box[2]);
 512
 513         TGeoVolume *aCORDE7 = new TGeoVolume("ACORDE7",acorde7,al);
 514
 515         TGeoCombiTrans *aco7 = new TGeoCombiTrans("aco7",posx,posy,posz-4*dy,idrotm231);
 516         TGeoCombiTrans *aco7q1 = new TGeoCombiTrans("aco7q1",posx,posy,
 517                                         constants->ModulePositionZ(3)-4*dy,idrotm231);
 518         TGeoCombiTrans *aco7q2 = new TGeoCombiTrans("aco7q2",posx,posy,
 519                                         constants->ModulePositionZ(5)-4*dy,idrotm231);
 520         TGeoCombiTrans *aco7q3 = new TGeoCombiTrans("aco7q3",posx,posy,
 521                                         constants->ModulePositionZ(8)-4*dy,idrotm231);
 522
 523         inFace->AddNode(aCORDE7,20,aco7);
 524         inFace->AddNode(aCORDE7,21,aco7q1);
 525         inFace->AddNode(aCORDE7,22,aco7q2);
 526         inFace->AddNode(aCORDE7,23,aco7q3);
 527
 528
 529         count=24;
 530         for(Int_t dyA=0;dyA<=4;dyA++)
 531         {
 532
 533                 Float_t posx1=constants->SupportModulePositionX(dyA)+0.1*293*0.7071-56*0.7071-18+des;
 534                 Float_t posy1=constants->SupportModulePositionY(dyA)-0.1*293*0.7071-56*0.7071+3-des-q1+kro;
 535                 Float_t posza=constants->SupportModulePositionZ(dyA);
 536                 Float_t posx2=constants->SupportModulePositionX(dyA)-0.27*293*0.7071-56*0.7071-18+des;
 537                 Float_t posy2=constants->SupportModulePositionY(dyA)+0.27*293*0.7071-56*0.7071+3-des-q1+kro;
 538                 TGeoCombiTrans *aco7q4 = new TGeoCombiTrans("aco7q4",posx1,posy1,posza,idrotm231);
 539                 TGeoCombiTrans *aco7q5 = new TGeoCombiTrans("aco7q5",posx2,posy2,posza,idrotm231);
 540                 inFace->AddNode(aCORDE7,count,aco7q4);
 541                 inFace->AddNode(aCORDE7,count+1,aco7q5);
 542                 count=count+2;
 543                 dyA++;
 544         }
 545
 546
 547         count=34;
 548         for(Int_t dyb=5;dyb<=9;dyb++)
 549         {
 550
 551                 Float_t posx1=constants->SupportModulePositionX(dyb)+0.1*293*0.7071-56*0.7071-18+des;
 552                 Float_t posy1=constants->SupportModulePositionY(dyb)-0.1*293*0.7071-56*0.7071+3-des-q1+kro;
 553                 Float_t poszb=constants->SupportModulePositionZ(dyb+10);
 554                 Float_t posx2=constants->SupportModulePositionX(dyb)-0.27*293*0.7071-56*0.7071-18+des;
 555                 Float_t posy2=constants->SupportModulePositionY(dyb)+0.27*293*0.7071-56*0.7071+3-des-q1+kro;
 556                 TGeoCombiTrans *aco7q6 = new TGeoCombiTrans("aco7q6",posx1,posy1,poszb,idrotm231);
 557                 TGeoCombiTrans *aco7q7 = new TGeoCombiTrans("aco7q7",posx2,posy2,poszb,idrotm231);
 558                 inFace->AddNode(aCORDE7,count,aco7q6);
 559                 inFace->AddNode(aCORDE7,count+1,aco7q7);
 560                 count=count+2;
 561                 dyb++;
 562         }
 563
 564
 565
 566         Float_t posxq1=constants->SupportModulePositionX(10)+0.5*293*0.7071-56*0.7071-18;
 567         Float_t posyq1=constants->SupportModulePositionY(10)-0.5*293*0.7071-56*0.7071+3-q1+kro;
 568         Float_t poszq1=constants->SupportModulePositionZ(10);
 569         TGeoCombiTrans *aco7q8 = new TGeoCombiTrans("aco7q8",posxq1,posyq1,poszq1-4*dy,idrotm231);
 570         TGeoCombiTrans *aco7q9 = new TGeoCombiTrans("aco7q9",posxq1,posyq1,
 571                                         constants->ModulePositionZ(13)-4*dy,idrotm231);
 572         TGeoCombiTrans *aco7q10 = new TGeoCombiTrans("aco7q10",posxq1,posyq1,
 573                                         constants->ModulePositionZ(15)-4*dy,idrotm231);
 574         TGeoCombiTrans *aco7q11 = new TGeoCombiTrans("aco7q11",posxq1,posyq1,
 575                                         constants->ModulePositionZ(18)-4*dy,idrotm231);
 576         inFace->AddNode(aCORDE7,44,aco7q8);
 577         inFace->AddNode(aCORDE7,45,aco7q9);
 578         inFace->AddNode(aCORDE7,46,aco7q10);
 579         inFace->AddNode(aCORDE7,47,aco7q11);
 580
 581
 582         count=48;
 583         for(Int_t dyc=10;dyc<=14;dyc++)
 584
 585         {
 586
 587                 Float_t posx1=constants->SupportModulePositionX(dyc)+0.1*293*0.7071-56*0.7071-18+des;
 588                 Float_t posy1=constants->SupportModulePositionY(dyc)-0.1*293*0.7071-56*0.7071+3-des-0.8+kro;
 589                 Float_t poszc=constants->SupportModulePositionZ(dyc);
 590                 Float_t posx2=constants->SupportModulePositionX(dyc)-0.27*293*0.7071-56*0.7071-18+des;
 591                 Float_t posy2=constants->SupportModulePositionY(dyc)+0.27*293*0.7071-56*0.7071+3-des-1.5-0.8+kro;
 592                 TGeoRotation *rot1 = new TGeoRotation();
 593                 rot1->RotateZ(70);
 594                 TGeoCombiTrans *aco7q12 = new TGeoCombiTrans("aco7q12",posx1,posy1,poszc,idrotm231);
 595                 TGeoCombiTrans *aco7q13 = new TGeoCombiTrans("aco7q13",posx2+15,posy2-10,poszc,rot1);
 596                 inFace->AddNode(aCORDE7,count,aco7q12);
 597                 inFace->AddNode(aCORDE7,count+1,aco7q13);// bars 25 grades
 598                 count=count+2;
 599                 dyc++;
 600         }
 601
 602
 603         count=57;
 604         for(Int_t dyd=15;dyd<=19;dyd++)
 605
 606         {
 607
 608                 Float_t posx1=constants->SupportModulePositionX(dyd)+0.1*293*0.7071-56*0.7071-18+des;
 609                 Float_t posy1=constants->SupportModulePositionY(dyd)-0.1*293*0.7071-56*0.7071+3-des-q1-0.8+kro;
 610                 Float_t poszd=constants->SupportModulePositionZ(dyd);
 611                 Float_t posx2=constants->SupportModulePositionX(dyd)-0.27*293*0.7071-56*0.7071-18+des;
 612                 Float_t posy2=constants->SupportModulePositionY(dyd)+0.27*293*0.7071-56*0.7071+3-des-1.5-q1-0.8+kro;
 613                 TGeoRotation *rot1 = new TGeoRotation();
 614                 rot1->RotateZ(70);
 615                 TGeoCombiTrans *aco7q14 = new TGeoCombiTrans("aco7q14",posx1,posy1,poszd,idrotm231);
 616                 TGeoCombiTrans *aco7q15 = new TGeoCombiTrans("aco7q15",posx2+15,posy2-10,poszd,rot1);
 617                 inFace->AddNode(aCORDE7,count,aco7q14);
 618                 inFace->AddNode(aCORDE7,count+1,aco7q15);// bars 25 grades
 619                 count=count+2;
 620                 dyd++;
 621         }
 622
 623
 624         //*** Out Face ***
 625
 626 //      box[0]=39;
 627         box[0]=27;
 628         box[1]=5;
 629         box[2]=5;
 630         Float_t s1=2.5;
 631         Float_t posxqa=constants->SupportModulePositionX(50)-0.5*293*0.7071+56*0.7071+18;
 632         Float_t posyqa=constants->SupportModulePositionY(50)-0.5*293*0.7071-56*0.7071+3-s1+kro;
 633         Float_t poszqa=constants->SupportModulePositionZ(50);
 634         TGeoCombiTrans *aco7q16 = new TGeoCombiTrans("aco7q16",
 635                                         posxqa,posyqa,poszqa-4*dy,idrotm232);
 636         TGeoCombiTrans *aco7q17 = new TGeoCombiTrans("aco7q17",
 637                                         posxqa,posyqa,
 638                                         constants->ModulePositionZ(43)-4*dy,idrotm232);
 639         TGeoCombiTrans *aco7q18 = new TGeoCombiTrans("aco7q18",posxqa,posyqa,
 640                                         constants->ModulePositionZ(55)-4*dy,idrotm232);
 641         TGeoCombiTrans *aco7q19 = new TGeoCombiTrans("aco7q19",posxqa,posyqa,
 642                                         constants->ModulePositionZ(58)-4*dy,idrotm232);
 643         TGeoCombiTrans *aco7q20 = new TGeoCombiTrans("aco7q20",
 644                                         constants->SupportModulePositionX(50)-0.1*293*0.7071
 645                                         +56*0.7071+18-des,
 646                                         constants->SupportModulePositionY
 647                                         (50)-0.1*293*0.7071-56*0.7071+3-des-s1,
 648                                         constants->SupportModulePositionZ(45),idrotm232);
 649         TGeoCombiTrans *aco7q21 = new TGeoCombiTrans("aco7q21",
 650                                         constants->SupportModulePositionX(50)+0.27*293*0.7071
 651                                         +56*0.7071+18-des,
 652                                         constants->SupportModulePositionY(50)
 653                                         +0.27*293*0.7071-56*0.7071+3-des-s1,
 654                                         constants->SupportModulePositionZ(45),idrotm232);
 655         outFace->AddNode(aCORDE7,19,aco7q16);
 656         outFace->AddNode(aCORDE7,20,aco7q17);
 657         outFace->AddNode(aCORDE7,21,aco7q18);
 658         outFace->AddNode(aCORDE7,22,aco7q19);
 659         outFace->AddNode(aCORDE7,23,aco7q20);
 660         outFace->AddNode(aCORDE7,24,aco7q21);
 661
 662
 663         count=25;
 664         for(Int_t dye=50;dye<=54;dye++)
 665         {
 666
 667                 Float_t posx1=constants->SupportModulePositionX(dye)-0.1*293*0.7071+56*0.7071+18-des;
 668                 Float_t posy1=constants->SupportModulePositionY(dye)-0.1*293*0.7071-56*0.7071+3-des-s1+kro;
 669                 Float_t posze=constants->SupportModulePositionZ(dye);
 670                 Float_t posx2=constants->SupportModulePositionX(dye)+0.27*293*0.7071+56*0.7071+18-des;
 671                 Float_t posy2=constants->SupportModulePositionY(dye)+0.27*293*0.7071-56*0.7071+3-des-s1+kro;
 672                 TGeoCombiTrans *aco7q22 = new TGeoCombiTrans("aco7q22",posx1,posy1,posze,idrotm232);
 673                 TGeoCombiTrans *aco7q23 = new TGeoCombiTrans("aco7q23",posx2,posy2,posze,idrotm232);
 674                 outFace->AddNode(aCORDE7,count,aco7q22);
 675                 outFace->AddNode(aCORDE7,count+1,aco7q23);
 676                 count=count+2;
 677                 dye++;
 678         }
 679
 680
 681         count=35;
 682         for(Int_t dyf=57;dyf<=59;dyf++)
 683         {
 684
 685                 Float_t posx1=constants->SupportModulePositionX(dyf)-0.1*293*0.7071+56*0.7071+18-des;
 686                 Float_t posy1=constants->SupportModulePositionY(dyf)-0.1*293*0.7071-56*0.7071+3-des-s1+kro;
 687                 Float_t poszf=constants->SupportModulePositionZ(dyf-10);
 688                 Float_t posx2=constants->SupportModulePositionX(dyf)+0.27*293*0.7071+56*0.7071+18-des;
 689                 Float_t posy2=constants->SupportModulePositionY(dyf)+0.27*293*0.7071-56*0.7071+3-des-s1+kro;
 690                 TGeoCombiTrans *aco7q24 = new TGeoCombiTrans("aco7q24",posx1,posy1,poszf,idrotm232);
 691                 TGeoCombiTrans *aco7q25 = new TGeoCombiTrans("aco7q25",posx2,posy2,poszf,idrotm232);
 692                 outFace->AddNode(aCORDE7,count,aco7q24);
 693                 outFace->AddNode(aCORDE7,count+1,aco7q25);
 694                 count=count+2;
 695                 dyf++;
 696         }
 697
 698
 699         Float_t posxqb=constants->SupportModulePositionX(40)-0.5*293*0.7071+56*0.7071+18;
 700         Float_t posyqb=constants->SupportModulePositionY(40)-0.5*293*0.7071-56*0.7071+3-s1+kro;
 701         Float_t poszqb=constants->SupportModulePositionZ(40);
 702         TGeoCombiTrans *aco7q26 = new TGeoCombiTrans("aco7q26",
 703                                         posxqb,posyqb,poszqb-4*dy,idrotm232);
 704         TGeoCombiTrans *aco7q27 = new TGeoCombiTrans("aco7q27",
 705                                         posxqb,posyqb,
 706                                         constants->SupportModulePositionZ(43)-4*dy,idrotm232);
 707         TGeoCombiTrans *aco7q28 = new TGeoCombiTrans("aco7q28",
 708                                         posxqb,posyqb,
 709                                         constants->SupportModulePositionZ(45)-4*dy,idrotm232);
 710         TGeoCombiTrans *aco7q29 = new TGeoCombiTrans("aco7q29",posxqb,posyqb,
 711                                         constants->SupportModulePositionZ(48)-4*dy,idrotm232);
 712         outFace->AddNode(aCORDE7,41,aco7q26);
 713         outFace->AddNode(aCORDE7,42,aco7q27);
 714         outFace->AddNode(aCORDE7,43,aco7q28);
 715         outFace->AddNode(aCORDE7,44,aco7q29);
 716
 717         count=45;
 718         for(Int_t dyg=40;dyg<=44;dyg++)
 719         {
 720
 721                 Float_t posx1=constants->SupportModulePositionX(dyg)-0.1*293*0.7071+56*0.7071+18-des;
 722                 Float_t posy1=constants->SupportModulePositionY(dyg)-0.1*293*0.7071-56*0.7071+3-des-s1+kro;
 723                 Float_t poszg=constants->SupportModulePositionZ(dyg);
 724                 Float_t posx2=constants->SupportModulePositionX(dyg)+0.27*293*0.7071+56*0.7071+18-des;
 725                 Float_t posy2=constants->SupportModulePositionY(dyg)+0.27*293*0.7071-56*0.7071+3-des-s1+kro;
 726                 TGeoRotation *rot1 = new TGeoRotation();
 727                 rot1->RotateZ(105);
 728                 TGeoCombiTrans *aco7q30 = new TGeoCombiTrans("aco7q30",posx1,posy1,poszg,idrotm232);
 729                 TGeoCombiTrans *aco7q31 = new TGeoCombiTrans("aco7q31",posx2-15,posy2-10,poszg,rot1);
 730                 outFace->AddNode(aCORDE7,count,aco7q30);
 731                 outFace->AddNode(aCORDE7,count+1,aco7q31);// bars 25 grades
 732                 count=count+2;
 733                 dyg++;
 734         }
 735
 736
 737         count=55;
 738         for(Int_t dyh=45;dyh<=49;dyh++)
 739         {
 740
 741                 Float_t posx1=constants->SupportModulePositionX(dyh)-0.1*293*0.7071+56*0.7071+18-des;
 742                 Float_t posy1=constants->SupportModulePositionY(dyh)-0.1*293*0.7071-56*0.7071+3-des-s1+kro;
 743                 Float_t poszh=constants->SupportModulePositionZ(dyh);
 744                 Float_t posx2=constants->SupportModulePositionX(dyh)+0.27*293*0.7071+56*0.7071+18-des;
 745                 Float_t posy2=constants->SupportModulePositionY(dyh)+0.27*293*0.7071-56*0.7071+3-des-s1+kro;
 746                 TGeoRotation *rot1 = new TGeoRotation();
 747                 rot1->RotateZ(105);
 748                 TGeoCombiTrans *aco7q32 = new TGeoCombiTrans("aco7q32",posx1,posy1,poszh,idrotm232);
 749                 TGeoCombiTrans *aco7q33 = new TGeoCombiTrans("aco7q33",posx2-15,posy2-10,poszh,rot1);
 750                 outFace->AddNode(aCORDE7,count,aco7q32);
 751                 outFace->AddNode(aCORDE7,count+1,aco7q33);// bars 25 grades
 752                 count=count+2;
 753                 dyh++;
 754         }
 755
 756
 757
 758         // Set the bars non perpendicular at side faces
 759
 760         //*** In-Face ***
 761
 762         box[0]=5;
 763 //      box[1]=55.15;
 764         box[1]=40;
 765         box[2]=5;
 766         Float_t sm=2;
 767         Float_t re=1;
 768         Float_t posx1=constants->SupportModulePositionX(0)+0.5*293*0.7071-4*box[0]-8+re;
 769         Float_t posy1=constants->SupportModulePositionY(0)-0.5*293*0.7071-box[1]-18-2+sm;
 770         Float_t posz1=constants->SupportModulePositionZ(0);
 771
 772         TGeoBBox *acorde7q1 = new TGeoBBox("acorde7q1",box[0],box[1],box[2]);
 773
 774         TGeoVolume *aCORDE7q1 = new TGeoVolume("ACORDE7_1",acorde7q1,al);
 775         TGeoTranslation *aco71 = new TGeoTranslation("aco71",posx1,posy1,posz1-4*dy);
 776         TGeoTranslation *aco72 = new TGeoTranslation("aco72",posx1,posy1,
 777                                         constants->SupportModulePositionZ(3)-4*dy);
 778         TGeoTranslation *aco73 = new TGeoTranslation("aco73",posx1,posy1,
 779                                         constants->SupportModulePositionZ(5)-4*dy);
 780         TGeoTranslation *aco74 = new TGeoTranslation("aco74",posx1,posy1,
 781                                         constants->SupportModulePositionZ(8)-4*dy);
 782         inFace->AddNode(aCORDE7q1,67,aco71);
 783         inFace->AddNode(aCORDE7q1,68,aco72);
 784         inFace->AddNode(aCORDE7q1,69,aco73);
 785         inFace->AddNode(aCORDE7q1,70,aco74);
 786
 787
 788         count=71;
 789         for(Int_t dyi=0;dyi<=4;dyi++)
 790         {
 791
 792                 Float_t posx1a=constants->SupportModulePositionX(dyi)+0.1*293*0.7071-4*box[0]-8+des+re;
 793                 Float_t posy1a=constants->SupportModulePositionY(dyi)-0.1*293*0.7071-box[1]-18-2-des+sm;
 794                 Float_t posz1a=constants->SupportModulePositionZ(dyi);
 795                 Float_t dyx2=constants->SupportModulePositionX(dyi)-0.27*293*0.7071-4*box[0]-8+des+re;
 796                 Float_t dyy2=constants->SupportModulePositionY(dyi)+0.27*293*0.7071-box[1]-18-2-des+sm;
 797                 TGeoTranslation *aco75=new TGeoTranslation("aco75",posx1a,posy1a,posz1a);
 798                 TGeoTranslation *aco76=new TGeoTranslation("aco76",dyx2,dyy2,posz1a);
 799                 inFace->AddNode(aCORDE7q1,count,aco75);
 800                 inFace->AddNode(aCORDE7q1,count+1,aco76);
 801                 count=count+2;
 802                 dyi++;
 803         }
 804
 805
 806         count=81;
 807         for(Int_t dyj=5;dyj<=9;dyj++)
 808         {
 809
 810                 Float_t posx1b=constants->SupportModulePositionX(dyj)+0.1*293*0.7071-4*box[0]-8+des+re;
 811                 Float_t posy1b=constants->SupportModulePositionY(dyj)-0.1*293*0.7071-box[1]-18-2-des+sm;
 812                 Float_t posz1b=constants->SupportModulePositionZ(dyj+10);
 813                 Float_t dyx2=constants->SupportModulePositionX(dyj)-0.27*293*0.7071-4*box[0]-8+des+re;
 814                 Float_t dyy2=constants->SupportModulePositionY(dyj)+0.27*293*0.7071-box[1]-18-2-des+sm;
 815                 TGeoTranslation *aco75=new TGeoTranslation("aco75",posx1b,posy1b,posz1b);
 816                 TGeoTranslation *aco76=new TGeoTranslation("aco76",dyx2,dyy2,posz1b);
 817                 inFace->AddNode(aCORDE7q1,count,aco75);
 818                 inFace->AddNode(aCORDE7q1,count+1,aco76);
 819                 count=count+2;
 820                 dyj++;
 821         }
 822
 823
 824         Float_t posx1q1=constants->SupportModulePositionX(10)+0.5*293*0.7071-4*box[0]-8+re;
 825         Float_t posy1q1=constants->SupportModulePositionY(10)-0.5*293*0.7071-box[1]-18-2+sm;
 826         Float_t posz1q1=constants->SupportModulePositionZ(10);
 827         TGeoTranslation *aco77=new TGeoTranslation("aco77",posx1q1,posy1q1,posz1q1-4*dy);
 828         TGeoTranslation *aco78=new TGeoTranslation("aco78",posx1q1,posy1q1,
 829                                         constants->SupportModulePositionZ(13)-4*dy);
 830
 831         TGeoTranslation *aco79=new TGeoTranslation("aco79",posx1q1,posy1q1,
 832                                         constants->SupportModulePositionZ(15)-4*dy);
 833         TGeoTranslation *aco710=new TGeoTranslation("aco710",posx1q1,posy1q1,
 834                                         constants->SupportModulePositionZ(18)-4*dy);
 835         inFace->AddNode(aCORDE7q1,91,aco77);
 836         inFace->AddNode(aCORDE7q1,92,aco78);
 837         inFace->AddNode(aCORDE7q1,93,aco79);
 838         inFace->AddNode(aCORDE7q1,94,aco710);
 839
 840         count=95;
 841         for(Int_t dyk=10;dyk<=14;dyk++)
 842         {
 843
 844                 Float_t posx1c=constants->SupportModulePositionX(dyk)+0.1*293*0.7071-4*box[0]-8+des+re+.83;
 845                 Float_t posy1c=constants->SupportModulePositionY(dyk)-0.1*293*0.7071-box[1]-18-2-des+sm;
 846                 Float_t posz1c=constants->SupportModulePositionZ(dyk);
 847                 Float_t dyx2=constants->SupportModulePositionX(dyk)-0.27*293*0.7071-4*box[0]-4+des+re+0.83;
 848                 Float_t dyy2=constants->SupportModulePositionY(dyk)+0.27*293*0.7071-box[1]-18-5-des+sm;
 849                 TGeoTranslation *aco711=new TGeoTranslation("aco711",posx1c,posy1c,posz1c);
 850                 TGeoTranslation *aco712=new TGeoTranslation("aco712",dyx2,dyy2,posz1c);
 851                 inFace->AddNode(aCORDE7q1,count,aco711);
 852                 inFace->AddNode(aCORDE7q1,count+1,aco712);
 853                 count=count+2;
 854                 dyk++;
 855         }
 856
 857
 858
 859         count=105;
 860         for(Int_t dyl=15;dyl<=19;dyl++)
 861         {
 862
 863                 Float_t posx1d=constants->SupportModulePositionX(dyl)+0.1*293*0.7071-4*box[0]-8+des+re+0.83;
 864                 Float_t posy1d=constants->SupportModulePositionY(dyl)-0.1*293*0.7071-box[1]-18-2-des+sm;
 865                 Float_t posz1d=constants->SupportModulePositionZ(dyl);
 866                 Float_t dyx2=constants->SupportModulePositionX(dyl)-0.27*293*0.7071-4*box[0]-4+des+re+0.83;
 867                 Float_t dyy2=constants->SupportModulePositionY(dyl)+0.27*293*0.7071-box[1]-18-5-des;
 868                 TGeoTranslation *aco713=new TGeoTranslation("aco713",posx1d,posy1d,posz1d);
 869                 TGeoTranslation *aco714=new TGeoTranslation("aco714",dyx2,dyy2,posz1d);
 870                 inFace->AddNode(aCORDE7q1,count,aco713);
 871                 inFace->AddNode(aCORDE7q1,count+1,aco714);
 872                 count=count+2;
 873                 dyl++;
 874         }
 875
 876                 //*** Out-Face ***
 877
 878         Float_t posx1qa=constants->SupportModulePositionX(50)-0.5*293*0.7071+4*box[0]+8-re-1;
 879         Float_t posy1qa=constants->SupportModulePositionY(50)-0.5*293*0.7071-box[1]-18-2+sm-2.5;
 880         Float_t posz1qa=constants->SupportModulePositionZ(50);
 881         TGeoTranslation *aco715=new TGeoTranslation("aco715",posx1qa,posy1qa,posz1qa-4*dy);
 882         TGeoTranslation *aco716=new TGeoTranslation("aco716",posx1qa,posy1qa,
 883                                 constants->SupportModulePositionZ(43)-4*dy);
 884         TGeoTranslation *aco717=new TGeoTranslation("aco717",posx1qa,posy1qa,
 885                                 constants->SupportModulePositionZ(55)-4*dy);
 886         TGeoTranslation *aco718=new TGeoTranslation("aco718",posx1qa,posy1qa,
 887                                 constants->SupportModulePositionZ(58)-4*dy);
 888         TGeoTranslation *aco719=new TGeoTranslation("aco719",
 889                                 constants->SupportModulePositionX(50)-0.1*293*0.7071+4*box[0]+8-des-re-1,
 890                                 constants->SupportModulePositionY(50)-0.1*293*0.7071-box[1]-18-2-des+sm-2.5,
 891                                 constants->SupportModulePositionZ(45));
 892         TGeoTranslation *aco720=new TGeoTranslation("aco720",
 893                                 constants->SupportModulePositionX(50)+0.27*293*0.7071+4*box[0]+8-des-re-1,
 894                                 constants->SupportModulePositionY(50)+0.27*293*0.7071-box[1]-18-2-des+sm-2.5,
 895                                 constants->SupportModulePositionZ(45));
 896
 897
 898         outFace->AddNode(aCORDE7q1,115,aco715);
 899         outFace->AddNode(aCORDE7q1,116,aco716);
 900         outFace->AddNode(aCORDE7q1,117,aco717);
 901         outFace->AddNode(aCORDE7q1,118,aco718);
 902         outFace->AddNode(aCORDE7q1,119,aco719);
 903         outFace->AddNode(aCORDE7q1,120,aco720);
 904
 905
 906
 907
 908         count=65;
 909         for(Int_t dym=50;dym<=54;dym++)
 910         {
 911
 912                 Float_t posx1e=constants->SupportModulePositionX(dym)-0.1*293*0.7071+4*box[0]+8-des-re-1;
 913                 Float_t posy1e=constants->SupportModulePositionY(dym)-0.1*293*0.7071-box[1]-18-2-des+sm-2.5;
 914                 Float_t posz1e=constants->SupportModulePositionZ(dym);
 915                 Float_t dyx2=constants->SupportModulePositionX(dym)+0.27*293*0.7071+4*box[0]+8-des-re-1;
 916                 Float_t dyy2=constants->SupportModulePositionY(dym)+0.27*293*0.7071-box[1]-18-2-des+sm-2.5;
 917                 TGeoTranslation *aco721=new TGeoTranslation("aco721",posx1e,posy1e,posz1e);
 918                 TGeoTranslation *aco722=new TGeoTranslation("aco722",dyx2,dyy2,posz1e);
 919                 outFace->AddNode(aCORDE7q1,count,aco721);
 920                 outFace->AddNode(aCORDE7q1,count+1,aco722);
 921                 count=count+2;
 922                 dym++;
 923         }
 924
 925
 926
 927         count=75;
 928         for(Int_t dyn=57;dyn<=59;dyn++)
 929         {
 930
 931                 Float_t posx1f=constants->SupportModulePositionX(dyn)-0.1*293*0.7071+4*box[0]+8-des-re-1;
 932                 Float_t posy1f=constants->SupportModulePositionY(dyn)-0.1*293*0.7071-box[1]-18-2-des+sm-2.5;
 933                 Float_t posz1f=constants->SupportModulePositionZ(dyn-10);
 934                 Float_t dyx2=constants->SupportModulePositionX(dyn)+0.27*293*0.7071+4*box[0]+8-des-re-1;
 935                 Float_t dyy2=constants->SupportModulePositionY(dyn)+0.27*293*0.7071-box[1]-18-2-des+sm-2.5;
 936                 TGeoTranslation *aco723=new TGeoTranslation("aco723",posx1f,posy1f,posz1f);
 937                 TGeoTranslation *aco724=new TGeoTranslation("aco724",dyx2,dyy2,posz1f);
 938                 outFace->AddNode(aCORDE7q1,count,aco723);
 939                 outFace->AddNode(aCORDE7q1,count+1,aco724);
 940                 count=count+2;
 941                 dyn++;
 942         }
 943
 944
 945         Float_t posx1qb=constants->SupportModulePositionX(40)-0.5*293*0.7071+4*box[0]+5;
 946         Float_t posy1qb=constants->SupportModulePositionY(40)-0.5*293*0.7071-box[1]-18-2;
 947         Float_t posz1qb=constants->SupportModulePositionZ(40);
 948         TGeoTranslation *aco725=new TGeoTranslation("aco725",posx1qb,posy1qb,posz1qb-4*dy);
 949         TGeoTranslation *aco726=new TGeoTranslation("aco726",posx1qb,posy1qb,
 950                                 constants->SupportModulePositionZ(43)-4*dy);
 951         TGeoTranslation *aco727=new TGeoTranslation("aco727",posx1qb,posy1qb,
 952                                 constants->SupportModulePositionZ(45)-4*dy);
 953         TGeoTranslation *aco728=new TGeoTranslation("aco728",posx1qb,posy1qb,
 954                                 constants->SupportModulePositionZ(48)-4*dy);
 955         outFace->AddNode(aCORDE7q1,85,aco725);
 956         outFace->AddNode(aCORDE7q1,86,aco726);
 957         outFace->AddNode(aCORDE7q1,87,aco727);
 958         outFace->AddNode(aCORDE7q1,88,aco728);
 959
 960
 961
 962         count=89;
 963         for(Int_t dyo=40;dyo<=44;dyo++)
 964         {
 965
 966                 Float_t posx1g=constants->SupportModulePositionX(dyo)-0.1*293*0.7071+4*box[0]+8-des-re-1;
 967                 Float_t posy1g=constants->SupportModulePositionY(dyo)-0.1*293*0.7071-box[1]-18-2-des+sm-2.5;
 968                 Float_t posz1g=constants->SupportModulePositionZ(dyo);
 969                 Float_t dyx2=constants->SupportModulePositionX(dyo)+0.27*293*0.7071+4*box[0]+4-des-re-1+2.8;
 970                 Float_t dyy2=constants->SupportModulePositionY(dyo)+0.27*293*0.7071-box[1]-18-5-des+sm-2.5+3;
 971                 TGeoTranslation *aco729=new TGeoTranslation("aco729",posx1g,posy1g,posz1g);
 972                 TGeoTranslation *aco730=new TGeoTranslation("aco730",dyx2,dyy2,posz1g);
 973                 outFace->AddNode(aCORDE7q1,count,aco729);
 974                 outFace->AddNode(aCORDE7q1,count+1,aco730);
 975                 count=count+2;
 976                 dyo++;
 977         }
 978
 979
 980
 981         count=99;
 982         for(Int_t dyp=45;dyp<=49;dyp++)
 983         {
 984
 985                 Float_t posx1h=constants->SupportModulePositionX(dyp)-0.1*293*0.7071+4*box[0]+8-des-re-1;
 986                 Float_t posy1h=constants->SupportModulePositionY(dyp)-0.1*293*0.7071-box[1]-18-2-des+sm-2.5;
 987                 Float_t posz1h=constants->SupportModulePositionZ(dyp);
 988                 Float_t dyx2=constants->SupportModulePositionX(dyp)+0.27*293*0.7071+4*box[0]+4-des-re-1+2.8;
 989                 Float_t dyy2=constants->SupportModulePositionY(dyp)+0.27*293*0.7071-box[1]-18-5-des+sm-2.5+3;
 990                 TGeoTranslation *aco729=new TGeoTranslation("aco729",posx1h,posy1h,posz1h);
 991                 TGeoTranslation *aco730=new TGeoTranslation("aco730",dyx2,dyy2,posz1h);
 992                 outFace->AddNode(aCORDE7q1,count,aco729);
 993                 outFace->AddNode(aCORDE7q1,count+1,aco730);
 994                 count=count+2;
 995                 dyp++;
 996         }
 997
 998
 999         // Here I define a master volume "ACORDE_SUPPORT" for Acorde's support
1000
1001         //---> Set the support of ACORDE alice MODULES
1002
1003
1004         Float_t dy1=20;
1005         box[0]=10;
1006         box[1]=0.5;
1007         box[2]=500;
1008
1009         Float_t sx=constants->SupportModulePositionX(24)-0.5*293;
1010         Float_t sy=constants->SupportModulePositionY(24)-box[1];
1011         Float_t sz=0;
1012         Float_t sx2=constants->SupportModulePositionX(24)+0.5*293-dy;
1013         Float_t sy2=constants->SupportModulePositionY(24)-box[1];
1014         Float_t sx4=constants->SupportModulePositionX(24)-0.5*293+dy2;
1015         Float_t sy4=constants->SupportModulePositionY(24)-box[1];
1016         Float_t sx5=constants->SupportModulePositionX(24)+0.5*293-dy2;
1017         Float_t sy5=constants->SupportModulePositionY(24)-box[1];
1018
1019         Float_t dyx=constants->SupportModulePositionX(4)+0.5*293*0.7071-box[0];
1020         Float_t dyy=constants->SupportModulePositionY(4)-0.5*293*0.7071-box[1];
1021         Float_t dyz=0;
1022         Float_t dyx1=constants->SupportModulePositionX(4)+0.1*293*0.7071-box[0];
1023         Float_t dyy1=constants->SupportModulePositionY(4)-0.1*293*0.7071-box[1];
1024         Float_t dyx2=constants->SupportModulePositionX(4)-0.27*293*0.7071-box[0];
1025         Float_t dyy2=constants->SupportModulePositionY(4)+0.27*293*0.7071-box[1];
1026
1027
1028         Float_t dx1=constants->SupportModulePositionX(14)+0.5*293*0.7071-box[0];
1029         Float_t dy11=constants->SupportModulePositionY(14)-0.5*293*0.7071-box[1];
1030         Float_t dyx11=constants->SupportModulePositionX(14)+0.1*293*0.7071-box[0];
1031         Float_t dyy11=constants->SupportModulePositionY(14)-0.1*293*0.7071-box[1];
1032         Float_t dyx21=constants->SupportModulePositionX(14)-0.27*293*0.7071-box[0];
1033         Float_t dyy21=constants->SupportModulePositionY(14)+0.27*293*0.7071-box[1];
1034
1035
1036         Float_t tbox[3];
1037         tbox[0]=1;
1038         tbox[1]=7;
1039         tbox[2]=500;
1040
1041         TGeoVolume *support = new TGeoVolumeAssembly("ACORDE_SUPPORT");
1042
1043         TGeoBBox *acorde8 = new TGeoBBox("acorde8",box[0],box[1],box[2]);
1044         TGeoVolume *aCORDE8 = new TGeoVolume("ACORDE8",acorde8,al);
1045
1046         TGeoBBox *acorde9 = new TGeoBBox("acorde9",tbox[0],tbox[1],tbox[2]);
1047         TGeoVolume *aCORDE9 = new TGeoVolume("ACORDE9",acorde9,al);
1048
1049         support->AddNode(aCORDE8,1,new TGeoTranslation(0,-5,0));
1050         support->AddNode(aCORDE8,2,new TGeoTranslation(0,-dy1,0));
1051         support->AddNode(aCORDE9,3,new TGeoTranslation(0,-tbox[1]-5.5,0));
1052
1053
1054         // Put "support" on Up-Face
1055
1056         upFace->AddNode(support,69,new TGeoTranslation("aco8",sx,sy,sz));
1057         upFace->AddNode(support,70,new TGeoTranslation("aco8_2",sx2,sy2,sz));
1058         upFace->AddNode(support,71,new TGeoTranslation("aco8_4",sx4,sy4,sz));
1059         upFace->AddNode(support,72,new TGeoTranslation("aco8_6",sx5,sy5,sz));
1060         upFace->AddNode(support,73,new TGeoTranslation("aco8_2",-sx2,sy2,sz));
1061         upFace->AddNode(support,74,new TGeoTranslation("aco8_4",-sx4,sy4,sz));
1062         upFace->AddNode(support,75,new TGeoTranslation("aco8_6",-sx5,sy5,sz));
1063
1064         // Put "support" on In-Face
1065         Float_t ms = 1.3;
1066         inFace->AddNode(support,121,new TGeoCombiTrans("aco8_81",dyx,dyy+ms,dyz,idrotm232));
1067         inFace->AddNode(support,122,new TGeoCombiTrans("aco8_121",dyx1+des,ms+dyy1-des,dyz,idrotm232));
1068         inFace->AddNode(support,123,new TGeoCombiTrans("aco8_161",dyx2+des,ms+dyy2-des,dyz,idrotm232));
1069         inFace->AddNode(support,124,new TGeoCombiTrans("aco8_82",dx1,ms+dy11,dyz,idrotm232));
1070         inFace->AddNode(support,125,new TGeoCombiTrans("aco8_122",dyx11+des,ms+dyy11-des,dyz,idrotm232));
1071         inFace->AddNode(support,126,new TGeoCombiTrans("aco8_162",dyx21+des,ms+dyy21-des,dyz,idrotm232));
1072
1073         // Put "support" on Out-Face
1074
1075         outFace->AddNode(support,121,new TGeoCombiTrans("aco8_81",-dyx,dyy+ms,dyz,idrotm231));
1076         outFace->AddNode(support,122,new TGeoCombiTrans("aco8_121",-dyx1-des,ms+dyy1-des,dyz,idrotm231));
1077         outFace->AddNode(support,123,new TGeoCombiTrans("aco8_161",-dyx2-des,ms+dyy2-des,dyz,idrotm231));
1078         outFace->AddNode(support,124,new TGeoCombiTrans("aco8_82",-dx1,dy11+ms,dyz,idrotm231));
1079         outFace->AddNode(support,125,new TGeoCombiTrans("aco8_122",-dyx11-des,ms+dyy11-des,dyz,idrotm231));
1080         outFace->AddNode(support,126,new TGeoCombiTrans("aco8_162",-dyx21-des,ms+dyy21-des,dyz,idrotm231));
1081
1082         aCORDE->AddNode(inFace,1);//---> volume of supports & bars in-face
1083         aCORDE->AddNode(upFace,2);//---> volume of supports & bars up-face
1084         aCORDE->AddNode(outFace,3);//---> volume of supports & bars out-face
1085         aCORDE->AddNode(modules,4);//---> volume of ALL ACORDE's Modules
1086         alice->AddNode(aCORDE,1);//---> put volume of ACORDE over ALICE's volume
1087
1088
1089
1090 }
1091 //__________________________________________________________________________
1092
1093 void AliACORDEv1::Init()
1094 {
1095   // Initialise L3 magnet after it has been built
1096   Int_t i;
1097   if(AliLog::GetGlobalDebugLevel()>0) {
1098     printf("\n%s: ",ClassName());
1099     for(i=0;i<35;i++) printf("*");
1100     printf(" ACORDEv1_INIT ");
1101     for(i=0;i<35;i++) printf("*");
1102     printf("\n%s: ",ClassName());
1103     // Here the ACORDEv initialisation code (if any!)
1104     for(i=0;i<80;i++) printf("*");
1105     printf("\n");
1106   }
1107  // AliACORDE::Init();
1108 }
1109 //____________________________________________________________________________
1110 void AliACORDEv1::StepManager()
1111 {
1112
1113   //
1114   // Called for every step in the Cosmic Ray Trigger
1115   //
1116
1117
1118   // volume:
1119   //  [0] = module number 1-60 (1==>(0-0), 60 (5-9)
1120   //  [1] = Plastic number: 0 (down) to 1 (up)
1121   static Int_t   vol[2];
1122   //
1123   // hit
1124   // [0] = PID
1125   // [1-3] = x, y, z
1126   // [4] = time
1127   // [5-7] = px, py, pz
1128   // [8] = energy
1129   // [9] = energy loss
1130   // [10] = length of track through plastic
1131   static Float_t hits[11];
1132
1133   // local static variables
1134   static Float_t eloss;
1135   static Float_t step;
1136   // scintillator volume
1137  static Int_t idScint = gMC->VolId("ACORDE2");
1138   // local variables
1139   Int_t copy;
1140   TLorentzVector pos;
1141   TLorentzVector mom;
1142
1143   // only charged tracks
1144   if ( !gMC->TrackCharge() || !gMC->IsTrackAlive() ) return;
1145
1146   // only in sensitive material
1147   if (gMC->CurrentVolID(copy) == idScint) {
1148
1149     step  += gMC->TrackStep();
1150     eloss += gMC->Edep();
1151     // set all hit variables except eloss which is resetted
1152     // set volume variables
1153     if (gMC->IsTrackEntering()) {
1154       eloss = 0.0;
1155       step = 0.0;
1156       gMC->TrackPosition(pos);
1157       gMC->TrackMomentum(mom);
1158       // hit
1159       // [0] = PID
1160       // [1-3] = x, y, z
1161       // [4] = time
1162       // [5-7] = px, py, pz
1163       // [8] = energy
1164       // [9] = energy loss
1165       hits[0]  = (Float_t ) gMC->TrackPid();
1166
1167
1168       hits[1] = pos[0];
1169       hits[2] = pos[1];
1170       hits[3] = pos[2];
1171       hits[4] = gMC->TrackTime();
1172       hits[5] = mom[0];
1173       hits[6] = mom[1];
1174       hits[7] = mom[2];
1175       hits[8] = gMC->Etot();
1176       // volume:
1177       //  [0] = module number 1-60 (1==>(0-0), 60 (5-9)
1178       //  [1] = Plastic number: 0 (down) to 1 (up)
1179       Int_t copyPlastic; // plastic: down=1, up=2
1180       Int_t copyModule; // module: 1-60
1181       gMC->CurrentVolID(copyPlastic);
1182       gMC->CurrentVolOffID(1, copyModule);
1183       // module
1184       vol[0] = copyModule;
1185       // plastic: 0 = down, 1 = up
1186       vol[1] = copyPlastic - 4 ; // !!!!!!!
1187     // vol[1] = copyPlastic;
1188     } // end if gMC->IsTrackEntering()
1189
1190     // set hit[9] = total energy loss and book hit
1191     if( gMC->IsTrackExiting() ||
1192         gMC->IsTrackStop() ||
1193         gMC->IsTrackDisappeared()){
1194       hits[9] = eloss;
1195       hits[10] = step;
1196       eloss = 0.0;
1197       step = 0.0;
1198       AddHit(gAlice->GetMCApp()->GetCurrentTrackNumber(),vol, hits);
1199      }
1200   }
1201
1202
1203
1204 }
1205
1206 //_____________________________________________________________________________
1207 void AliACORDEv1::AddHit(Int_t track, Int_t *vol, Float_t *hits)
1208 {
1209   //
1210   // Add an ACORDE hit
1211   //
1212   TClonesArray &lhits = *fHits;
1213   new(lhits[fNhits++]) AliACORDEhit(fIshunt,track,vol,hits);
1214 }
1215
1216 //_____________________________________________________________________________
1217 void AliACORDEv1::AddDigits(Int_t* track, Int_t module, Float_t time)
1218 {
1219
1220   // Adds Digit
1221
1222   TClonesArray &ldigits = *fDigits;
1223   new(ldigits[fNdigits++]) AliACORDEdigit(track,module,time);
1224 }
1225 //_____________________________________________________________________________
1226
1227 void AliACORDEv1::MakeBranch(Option_t *option)
1228 {
1229 // Creates new branches in the current Root Tree
1230
1231   char branchname[10];
1232   sprintf(branchname,"%s",GetName());
1233   AliDebug(2,Form("fBufferSize = %d",fBufferSize));
1234   const char *cH = strstr(option,"H");
1235   if (fHits   && fLoader->TreeH() && cH) {
1236     fLoader->TreeH()->Branch(branchname,&fHits, fBufferSize);
1237     AliDebug(2,Form("Making Branch %s for hits",branchname));
1238   }
1239   const char *cD = strstr(option,"D");
1240   if (fDigits   && fLoader->TreeD() && cD) {
1241     fLoader->TreeD()->Branch(branchname,&fDigits, fBufferSize);
1242     AliDebug(2,Form("Making Branch %s for digits",branchname));
1243   }
1244 }
1245
1246 //_____________________________________________________________________________
1247 void AliACORDEv1::AddAlignableVolumes() const
1248 {
1249   //
1250   // Create entries for alignable volumes associating the symbolic volume
1251   // name with the corresponding volume path. Needs to be syncronized with
1252   // eventual changes in the geometry.
1253   //
1254
1255         // The alignable volumes are only the "ACORDE_MODULE_%d"
1256         //
1257         //      Structure of ACORDE's Geometry
1258         //
1259         //      ALIC_1
1260         //          |---> ACORDE_1
1261         //                      |----> ACORDE_1_1 (in_face) ---
1262         //                      |----> ACORDE_2_2 (up_face)    |--> BARS&SUPPORTS
1263         //                      |----> ACORDE_3_3 (out_face)---
1264         //                      |----> ACORDE_MODULES_4        |--> ACORDE'S MODULES
1265         //
1266         //
1267         //     Send comments to: Mario Rodriguez Cahuantzi <mrodrigu@mail.cern.ch>
1268
1269         TString vpstr1 = "ALIC_1/ACORDE_1/ALL_ACORDE_MODULES_4/ACORDE_MODULE_";
1270         TString snstr1 = "ACORDE/Array";
1271         TString volpath, symname;
1272         for(Int_t dy=1; dy<61 ; dy++)
1273         {
1274                 volpath = vpstr1;
1275                 volpath += dy;
1276                 symname = snstr1;
1277                 symname += dy;
1278                 if(!gGeoManager->SetAlignableEntry(symname.Data(),volpath.Data()))
1279                 AliFatal(Form("Alignable entry %s not created. Volume path %s not valid", symname.Data(),volpath.Data()));
1280         }
1281 }