]> git.uio.no Git - u/mrichter/AliRoot.git/blob - EMCAL/AliEMCALTrigger.cxx
New Trigger class, TRU mapping method included in Geometry
[u/mrichter/AliRoot.git] / EMCAL / AliEMCALTrigger.cxx
1 /**************************************************************************
2  * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
3  *                                                                        *
4  * Author: The ALICE Off-line Project.                                    *
5  * Contributors are mentioned in the code where appropriate.              *
6  *                                                                        *
7  * Permission to use, copy, modify and distribute this software and its   *
8  * documentation strictly for non-commercial purposes is hereby granted   *
9  * without fee, provided that the above copyright notice appears in all   *
10  * copies and that both the copyright notice and this permission notice   *
11  * appear in the supporting documentation. The authors make no claims     *
12  * about the suitability of this software for any purpose. It is          *
13  * provided "as is" without express or implied warranty.                  *
14  **************************************************************************/
15 /* $Id$ */
16
17
18 //_________________________________________________________________________  
19 //
20 //  Class for trigger analysis.
21 //  Digits are grouped in TRU's (384 cells? ordered fNTRUPhi x fNTRUEta). 
22 //  The algorithm searches all possible 4x4 cell combinations per each TRU, 
23 //  adding the digits amplitude and finding the maximum. Maximums are compared 
24 //  to triggers threshold and they are set. Thresholds need to be fixed. 
25 //  Last 2 modules are half size but they are treated as fullsize, then their 
26 //  TRU should be smaller. When this is fixed, class will be updated. 
27 //  Usage:
28 //
29 //  //Inside the event loop
30 //  AliEMCALTrigger *tr = new AliEMCALTrigger();//Init Trigger
31 //  tr->SetL0MBPbPbThreshold(500);
32 //  tr->SetL0MBppThreshold(100);
33 //  tr->SetL1JetLowPtThreshold(1000);
34 //  tr->SetL1JetMediumPtThreshold(10000);
35 //  tr->SetL1JetHighPtThreshold(20000);
36 //  tr->Trigger(); //Execute Trigger
37 //  tr->Print(""); //Print results
38 //
39 //*-- Author: Gustavo Conesa & Yves Schutz (IFIC, CERN) 
40 //////////////////////////////////////////////////////////////////////////////
41
42
43 // --- ROOT system ---
44 #include "TMatrixD.h"
45
46 // --- ALIROOT system ---
47
48 #include "AliRun.h" 
49 #include "AliRunLoader.h" 
50 #include "AliTriggerInput.h"
51 #include "AliEMCAL.h" 
52 #include "AliEMCALLoader.h" 
53 #include "AliEMCALDigit.h"
54 #include "AliEMCALTrigger.h" 
55 #include "AliEMCALGeometry.h"
56
57 ClassImp(AliEMCALTrigger)
58
59 //______________________________________________________________________
60 AliEMCALTrigger::AliEMCALTrigger()
61   : AliTriggerDetector(),
62     fL0MBPbPbThreshold(500), fL0MBppThreshold(50),fL1JetLowPtThreshold(1000), 
63     fL1JetMediumPtThreshold(10000), fL1JetHighPtThreshold(20000) 
64 {
65   //ctor
66
67    SetName("EMCAL");
68    CreateInputs();
69    
70    //Print("all") ; 
71 }
72
73
74
75 //____________________________________________________________________________
76 AliEMCALTrigger::AliEMCALTrigger(const AliEMCALTrigger & trig) 
77   : AliTriggerDetector(trig) 
78 {
79
80   // cpy ctor
81   
82   fL0MBPbPbThreshold       = trig.fL0MBPbPbThreshold ; 
83   fL0MBppThreshold         = trig.fL0MBppThreshold ; 
84   fL1JetLowPtThreshold     = trig.fL1JetLowPtThreshold ;
85   fL1JetMediumPtThreshold  = trig.fL1JetMediumPtThreshold ;
86   fL1JetHighPtThreshold    = trig.fL1JetHighPtThreshold ;
87
88 }
89
90 //----------------------------------------------------------------------
91 void AliEMCALTrigger::CreateInputs()
92 {
93    // inputs 
94    
95    // Do not create inputs again!!
96    if( fInputs.GetEntriesFast() > 0 ) return;
97    
98    fInputs.AddLast( new AliTriggerInput( "EMCAL_MB_PbPb_L0",     "EMCAL PbPb Minimum Bias L0",  0x01 ) );
99    fInputs.AddLast( new AliTriggerInput( "EMCAL_MB_pp_L0",       "EMCAL pp Minimum Bias L0",    0x02 ) );
100    fInputs.AddLast( new AliTriggerInput( "EMCAL_PbPb_JetHPt_L1", "EMCAL PbPb Jet High Pt L1",   0x04 ) );
101    fInputs.AddLast( new AliTriggerInput( "EMCAL_PbPb_JetMPt_L1", "EMCAL PbPb Jet Medium Pt L1", 0x08 ) );
102    fInputs.AddLast( new AliTriggerInput( "EMCAL_PbPb_JetLPt_L1", "EMCAL PbPb Jet Low Pt L1",    0x016 ) );
103  
104 }
105
106 //____________________________________________________________________________
107 void AliEMCALTrigger::MakeSlidingCell(const TClonesArray * trus , 
108                                       const Int_t isupermod,
109                                       const Int_t nTRU,
110                                       const Int_t nCellsPhi,
111                                       const Int_t nCellsEta,
112                                       Float_t *ampmax){
113   
114   //Sums energy of all possible 4x4 cells per each TRU. Fast signal 
115   //in the experiment is given by 2x2 cells, for this reason we loop 
116   //inside the TRU cells by 2. 
117   
118   Float_t amp = 0 ;
119   
120   for(Int_t i = 0 ; i < nTRU ; i++)   
121     ampmax[i] = 0 ;
122   
123   //Loop over all TRUS in the seleted supermodule
124   for(Int_t itru = 0 + (isupermod - 1) * nTRU ; itru < isupermod*nTRU ; itru++)
125     {
126       TMatrixD * tru = dynamic_cast<TMatrixD *>(trus->At(itru)) ;
127       
128       //Sliding 2x2 cell       
129       for(Int_t irow = 0 ; irow <  nCellsPhi; irow += 2){ 
130         for(Int_t icol = 0 ; icol < nCellsEta ; icol += 2){
131           amp = 0;
132           if( (irow+3) < nCellsPhi && (icol+3) < nCellsEta){//Avoid exit the TRU
133             for(Int_t i = irow; i < irow + 4 ; i++){
134               for(Int_t j = icol; j < icol + 4 ; j++){
135                 amp += (*tru)(i,j) ;
136               }
137             }
138           }
139           if(amp > ampmax[itru-(isupermod-1)*nTRU])
140             ampmax[itru-(isupermod-1)*nTRU] = amp ;
141           
142         }
143       }
144     }
145 }
146
147 //____________________________________________________________________________
148 void AliEMCALTrigger::Trigger() 
149 {
150   
151   //Main Method to select triggers.
152   //Loader
153   AliRunLoader *rl = AliRunLoader::GetRunLoader();
154   AliEMCALLoader *emcalLoader = dynamic_cast<AliEMCALLoader*>
155     (rl->GetDetectorLoader("EMCAL"));
156   
157   //Load EMCAL Geometry
158   rl->LoadgAlice(); 
159   AliRun * gAlice = rl->GetAliRun(); 
160   AliEMCAL * emcal  = (AliEMCAL*)gAlice->GetDetector("EMCAL");
161   AliEMCALGeometry * geom = emcal->GetGeometry();
162   //AliEMCALGeometry * geom = AliEMCALGeometry::GetInstance(); 
163
164   if (geom==0)
165     AliFatal("Did not get geometry from EMCALLoader");
166  
167   //Define some useful parameters
168  
169   Int_t nSuperModules = geom->GetNumberOfSuperModules() ; //12 SM in EMCAL
170   Int_t nTRU          = geom->GetNTRU();//3 TRU per super module
171   Int_t nCellsPhi  = geom->GetNPhi()*2/geom->GetNTRUPhi() ;
172   // 12(tow)*2(cell)/1 TRU, cells in Phi in one TRU
173   Int_t nCellsEta  = geom->GetNEta()*2/geom->GetNTRUEta() ;
174   // 24(mod)*2(tower)/3 TRU, cells in Eta in one TRU
175
176   //Info("Trigger","nSuperModules %d, nCellsPhi %d, nCellsEta %d",
177   //     nSuperModules, nCellsPhi,nCellsEta);
178   
179   //Take the digits list and declare digits pointers
180   TClonesArray * digits = emcalLoader->Digits(); //gime->Digits() ;
181   
182   TClonesArray * trus = geom->FillTRU(digits) ;
183
184   //Do Cell Sliding and select Trigger
185   Float_t max [10] ;
186   for(Int_t iSM = 1 ; iSM <= nSuperModules ; iSM++) {
187     
188     MakeSlidingCell(trus, iSM, nTRU, nCellsPhi, nCellsEta, max);
189
190     //cout<<"Max Amplitude in SuperMod "<<iSM<<" TRU1 "<<max[0]
191     //<<" TRU2 "<<max[1]<<" TRU3 "<<max[2]<<endl;
192     SetTriggers(max, nTRU) ;
193   }
194   
195 }
196
197 //____________________________________________________________________________
198 void AliEMCALTrigger::Print(const Option_t * opt) const 
199 {
200   
201   //Prints main parameters
202   
203   if(! opt)
204     return;
205   AliTriggerInput* in = 0x0 ;
206   
207   
208   AliInfo("EMCAL trigger information:") ; 
209   printf( "             Threshold for pp MB LO %d\n", fL0MBppThreshold) ;  
210   in = (AliTriggerInput*)fInputs.FindObject( "EMCAL_MB_pp_L0" );
211   if(in->GetValue())
212     printf( "             *** EMCAL MB pp LO is set ***\n") ; 
213   
214   printf( "             Threshold for PbPb MB LO %d\n", fL0MBPbPbThreshold) ;  
215   in = (AliTriggerInput*)fInputs.FindObject( "EMCAL_MB_PbPb_L0" );
216   if(in->GetValue())
217     printf( "             *** EMCAL MB PbPb LO is set ***\n") ; 
218   
219   printf( "             Jet Low Pt Threshold for PbPb L1 %d\n", fL1JetLowPtThreshold) ;
220   in = (AliTriggerInput*)fInputs.FindObject( "EMCAL_PbPb_JetLPt_L1" );
221   if(in->GetValue())
222     printf( "             *** EMCAL Jet Low Pt for PbPb L1 is set ***\n") ;
223
224   printf( "             Jet Medium Pt Threshold for L1 %d\n", fL1JetMediumPtThreshold) ;  
225   in = (AliTriggerInput*) fInputs.FindObject( "EMCAL_PbPb_JetMPt_L1" );
226   if(in->GetValue())
227     printf( "             *** EMCAL Jet Medium Pt for PbPb L1 is set ***\n") ;
228
229   printf( "             Jet High Pt Threshold for L1 %d\n", fL1JetHighPtThreshold) ;  
230   in = (AliTriggerInput*) fInputs.FindObject( "EMCAL_PbPb_JetHPt_L1" );
231   if(in->GetValue())
232     printf( "             *** EMCAL Jet High Pt for PbPb L1 is set ***\n") ;
233
234 }
235
236 //____________________________________________________________________________
237 void AliEMCALTrigger::SetTriggers(const Float_t * amp, const Int_t nTRU)  
238 {
239
240   //Checks the maximum amplitude per each TRU and compares with the 
241   //different triggers thresholds
242
243   Float_t max = 0;
244   for(Int_t i = 0 ; i < nTRU ; i++){
245     if(max < amp[i] )
246       max = amp[i] ;
247   }
248  
249   if(max >= fL0MBppThreshold)
250     SetInput("EMCAL_MB_pp_L0");
251   if(max >= fL0MBPbPbThreshold)
252     SetInput("EMCAL_MB_PbPb_L0");
253   if(max >= fL1JetLowPtThreshold)
254     SetInput("EMCAL_PbPb_JetLPt_L1"); 
255   if(max >= fL1JetMediumPtThreshold)
256     SetInput("EMCAL_PbPb_JetMPt_L1"); 
257   if(max >= fL1JetHighPtThreshold)
258     SetInput("EMCAL_PbPb_JetHPt_L1");
259
260 }