1 /**************************************************************************
2 * Copyright(c) 2007-2009, ALICE Experiment at CERN, All rights reserved. *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
16 // This class Defines the Geometry for the ITS services and support cones
17 // outside of the central volume (except for the Central support
18 // cylinders). Other classes define the rest of the ITS, specifically the
19 // SSD support cone, the SSD Support central cylinder, the SDD support cone,
20 // the SDD support central cylinder, the SPD Thermal Shield, The supports
21 // and cable trays on both the RB26 (muon dump) and RB24 sides, and all of
22 // the cabling from the ladders/stave ends out past the TPC.
24 // Here is the calling sequence associated with this file
25 // SPDSector(TGeoVolume *moth,TGeoManager *mgr)
26 // -----CarbonFiberSector(TGeoVolume *moth,Double_t &xAAtubeCenter0,
27 // Double_t &yAAtubeCenter0,TGeoManager *mgr)
28 // -----2* SPDsectorShape(Int_t n,const Double_t *xc,const Double_t *yc,
29 // | const Double_t *r,const Double_t *ths,
30 // | const Double_t *the,Int_t npr,Int_t &m,
31 // | Double_t **xp,Double_t **yp)
32 // -----StavesInSector(TGeoVolume *moth,TGeoManager *mgr)
33 // -----3* CreaeStave(Int_t layer,TArrayD &sizes,Bool_t addClips,
34 // | TGeoManager *mgr)
35 // | -----2* CreateHalfStave(Boot_t isRight,Int_t layer,
36 // | Int_t idxCentral,Int_t idxSide,
37 // | TArrayD &sizes,Bool_t addClips,
38 // | TGeoManager *mgr)
39 // | -----CreateGrondingFoil(Bool_t isRight,TArrayD &sizes,
40 // | | TGeoManager *mgr)
41 // | | -----4* CreateGroundingFoilSingle(Int_t type,
42 // | | TArrayD &sizes,
43 // | | TGeoManger *mgr)
44 // | |----CreateLadder(Int_t layer, TArrayD &sizes,
45 // | | TGeoManager *mgr)
46 // | |----CreateMCM(Bool_t isRight,TArrayD &sizes,
47 // | | TGeoManger *mgr)
48 // | |----CreatePixelBus(Bool_t isRight,TArrayD &sizes,
49 // | | TGeoManager *mgr)
50 // | -----CreateClip(TArrayD &sizes,TGeoManager *mgr)
51 // |----GetSectorMountingPoints(Int_t index,Double_t &x0,
52 // | Double_t &y0,Double_t &x1,
54 // -----3* ParallelPosition(Double_t dist1,Double_t dist2,
55 // Double_t phi,Double_t &x,Double_t &y)
57 // Obsoleate or presently unused routines are: setAddStave(Bool_t *mask),
58 // CreatePixelBusAndExtensions(...) which calles CreateExtender(...).
63 // General Root includes
64 #include <Riostream.h>
68 #include <TPolyLine.h>
69 #include <TPolyMarker.h>
71 // Root Geometry includes
72 #include <TGeoVolume.h>
73 #include <TGeoTube.h> // contains TGeoTubeSeg
76 #include <TGeoMatrix.h>
77 #include <TGeoMaterial.h>
78 #include <TGeoMedium.h>
79 #include <TGeoCompositeShape.h>
87 #include "AliITSv11GeometrySPD.h"
89 // Constant definistions
90 const Double_t AliITSv11GeometrySPD::fgkGapLadder =
91 AliITSv11Geometry::fgkmicron*75.; // 75 microns
92 const Double_t AliITSv11GeometrySPD::fgkGapHalfStave =
93 AliITSv11Geometry::fgkmicron*120.; // 120 microns
95 ClassImp(AliITSv11GeometrySPD)
96 //______________________________________________________________________
97 AliITSv11GeometrySPD::AliITSv11GeometrySPD(/*Double_t gap*/):
98 AliITSv11Geometry(),// Default constructor of base class
99 fAddStave(), // [DEBUG] must be TRUE for all staves which will be
100 // mounted in the sector (used to check overlaps)
101 fSPDsectorX0(0), // X of first edge of sector plane for stave
102 fSPDsectorY0(0), // Y of first edge of sector plane for stave
103 fSPDsectorX1(0), // X of second edge of sector plane for stave
104 fSPDsectorY1(0), // Y of second edge of sector plane for stave
105 fTubeEndSector() // coordinate of cooling tube ends
108 // Default constructor.
109 // This does not initialize anything and is provided just for
110 // completeness. It is recommended to use the other one.
111 // The alignment gap is specified as argument (default = 0.0075 cm).
117 // A default constructed AliITSv11GeometrySPD class.
121 for (i = 0; i < 6; i++) fAddStave[i] = kTRUE;
122 for(k=0;k<10;k++)for(i=0;i<6;i++)for(j=0;j<3;j++){
123 this->fTubeEndSector[k][0][i][j] = 0.0;
124 this->fTubeEndSector[k][1][i][j] = 0.0;
127 //______________________________________________________________________
128 AliITSv11GeometrySPD::AliITSv11GeometrySPD(Int_t debug/*, Double_t gap*/):
129 AliITSv11Geometry(debug),// Default constructor of base class
130 fAddStave(), // [DEBUG] must be TRUE for all staves which will be
131 // mounted in the sector (used to check overlaps)
132 fSPDsectorX0(0), // X of first edge of sector plane for stave
133 fSPDsectorY0(0), // Y of first edge of sector plane for stave
134 fSPDsectorX1(0), // X of second edge of sector plane for stave
135 fSPDsectorY1(0), // Y of second edge of sector plane for stave
136 fTubeEndSector() // coordinate of cooling tube ends
139 // Constructor with debug setting argument
140 // This is the constructor which is recommended to be used.
141 // It sets a debug level, and initializes the name of the object.
142 // The alignment gap is specified as argument (default = 0.0075 cm).
144 // Int_t debug Debug level, 0= no debug output.
148 // A default constructed AliITSv11GeometrySPD class.
152 for (i = 0; i < 6; i++) fAddStave[i] = kTRUE;
153 for(k=0;k<10;k++)for(i=0;i<6;i++)for(j=0;j<3;j++){
154 this->fTubeEndSector[k][0][i][j] = 0.0;
155 this->fTubeEndSector[k][1][i][j] = 0.0;
158 //______________________________________________________________________
159 AliITSv11GeometrySPD::AliITSv11GeometrySPD(const AliITSv11GeometrySPD &s):
160 AliITSv11Geometry(s),// Base Class Copy constructor
161 fAddStave(), // [DEBUG] must be TRUE for all staves which will be
162 // mounted in the sector (used to check overlaps)
163 fSPDsectorX0(s.fSPDsectorX0), // X of first edge of sector plane for stave
164 fSPDsectorY0(s.fSPDsectorY0), // Y of first edge of sector plane for stave
165 fSPDsectorX1(s.fSPDsectorX1), // X of second edge of sector plane for stave
166 fSPDsectorY1(s.fSPDsectorY1) // Y of second edge of sector plane for stave
171 // AliITSv11GeometrySPD &s source class
175 // A copy of a AliITSv11GeometrySPD class.
179 for (i = 0; i < 6; i++) this->fAddStave[i] = s.fAddStave[i];
180 for(k=0;k<10;k++)for(i=0;i<6;i++)for(j=0;j<3;j++){
181 this->fTubeEndSector[k][0][i][j] = s.fTubeEndSector[k][0][i][j];
182 this->fTubeEndSector[k][1][i][j] = s.fTubeEndSector[k][1][i][j];
185 //______________________________________________________________________
186 AliITSv11GeometrySPD& AliITSv11GeometrySPD::operator=(const
187 AliITSv11GeometrySPD &s)
192 // AliITSv11GeometrySPD &s source class
196 // A copy of a AliITSv11GeometrySPD class.
200 if(this==&s) return *this;
201 for (i = 0; i < 6; i++) this->fAddStave[i] = s.fAddStave[i];
202 this->fSPDsectorX0=s.fSPDsectorX0;
203 this->fSPDsectorY0=s.fSPDsectorY0;
204 this->fSPDsectorX1=s.fSPDsectorX1;
205 this->fSPDsectorY1=s.fSPDsectorY1;
206 for(k=0;k<10;k++)for(i=0;i<6;i++)for(j=0;j<3;j++){
207 this->fTubeEndSector[k][0][i][j] = s.fTubeEndSector[k][0][i][j];
208 this->fTubeEndSector[k][1][i][j] = s.fTubeEndSector[k][1][i][j];
212 //______________________________________________________________________
213 TGeoMedium* AliITSv11GeometrySPD::GetMedium(const char* mediumName,
214 TGeoManager *mgr) const
217 // This function is used to recovery any medium
218 // used to build the geometry volumes.
219 // If the required medium does not exists,
220 // a NULL pointer is returned, and an error message is written.
222 Char_t itsMediumName[30];
224 sprintf(itsMediumName, "ITS_%s", mediumName);
225 TGeoMedium* medium = mgr->GetMedium(itsMediumName);
226 if (!medium) AliError(Form("Medium <%s> not found", mediumName));
230 //______________________________________________________________________
231 Int_t AliITSv11GeometrySPD::CreateSPDCentralMaterials(Int_t &medOffset,
232 Int_t &matOffset) const
235 // Define the specific materials used for the ITS SPD central detectors.
237 // NOTE: These are the same old names.
238 // By the ALICE naming conventions, they start with "ITS SPD ...."
239 // Data taken from ** AliITSvPPRasymmFMD::CreateMaterials() **.
241 // Arguments [the ones passed by reference contain output values]:
242 // - medOffset --> (by ref) starting number of the list of media
243 // - matOffset --> (by ref) starting number of the list of Materials
246 // Int_t &medOffset Starting number of the list of media
247 // Int_t &matOffset Starting number of the list of materials
249 // Int_t &medOffset Ending number of the list of media
250 // Int_t &matOffset Ending number of the list of materials
252 // The last material indexused +1. (= next avaiable material index)
254 const Double_t ktmaxfd = 0.1 * fgkDegree; // Degree
255 const Double_t kstemax = 1.0 * fgkcm; // cm
256 const Double_t kdeemax = 0.1;//Fraction of particle's energy 0<deemax<=1
257 const Double_t kepsil = 1.0E-4; //
258 const Double_t kstmin = 0.0 * fgkcm; // cm "Default value used"
259 const Double_t ktmaxfdAir = 0.1 * fgkDegree; // Degree
260 const Double_t kstemaxAir = 1.0000E+00 * fgkcm; // cm
261 const Double_t kdeemaxAir = 0.1;//Fraction of particle's energy 0<deemax<=1
262 const Double_t kepsilAir = 1.0E-4;//
263 const Double_t kstminAir = 0.0 * fgkcm; // cm "Default value used"
264 const Double_t ktmaxfdSi = 0.1 * fgkDegree; // .10000E+01; // Degree
265 const Double_t kstemaxSi = 0.0075 * fgkcm; // .10000E+01; // cm
266 const Double_t kdeemaxSi = 0.1;//Fraction of particle's energy 0<deemax<=1
267 const Double_t kepsilSi = 1.0E-4;//
268 const Double_t kstminSi = 0.0 * fgkcm; // cm "Default value used"
270 Int_t matindex = matOffset;
271 Int_t medindex = medOffset;
276 Int_t ifield = (gAlice->Field()->Integ());
277 Double_t fieldm = (gAlice->Field()->Max());
278 Double_t params[8] = {8 * 0.0};
280 params[1] = (Double_t) ifield;
282 params[3] = ktmaxfdSi;
283 params[4] = kstemaxSi;
284 params[5] = kdeemaxSi;
285 params[6] = kepsilSi;
286 params[7] = kstminSi;
288 // Definition of materials and mediums.
289 // Last argument in material definition is its pressure,
290 // which is initialized to ZERO.
291 // For better readability, it is simply set to zero.
292 // Then the writing "0.0 * fgkPascal" is replaced by "0."
295 // silicon definition for ITS (overall)
296 mat = new TGeoMaterial("ITS_SI", 28.086, 14.0, 2.33 * fgkgcm3,
297 TGeoMaterial::kMatStateSolid, 25.0*fgkCelsius, 0.);
298 mat->SetIndex(matindex);
299 med = new TGeoMedium("SI", medindex++, mat, params);
301 // silicon for ladder chips
302 mat = new TGeoMaterial("SPD SI CHIP", 28.086, 14.0, 2.33 * fgkgcm3,
303 TGeoMaterial::kMatStateSolid, 25.0*fgkCelsius, 0.);
304 mat->SetIndex(matindex);
305 med = new TGeoMedium("SPD SI CHIP", medindex++, mat, params);
307 // silicon for pixel bus
308 mat = new TGeoMaterial("SPD SI BUS", 28.086, 14.0, 2.33 * fgkgcm3,
309 TGeoMaterial::kMatStateSolid, 25.0*fgkCelsius, 0.);
310 mat->SetIndex(matindex);
311 med = new TGeoMedium("SPD SI BUS", medindex++, mat, params);
313 // carbon fiber material is defined as a mix of C-O-N-H
314 // defined in terms of fractional weights according to 'C (M55J)'
315 // it is used for the support and clips
316 mix = new TGeoMixture("C (M55J)", 4, 1.9866 * fgkgcm3);
317 mix->SetIndex(matindex);
318 mix->DefineElement(0, 12.01070, 6.0, 0.908508078);// C by fractional weight
319 mix->DefineElement(1, 14.00670, 7.0, 0.010387573);// N by fractional weight
320 mix->DefineElement(2, 15.99940, 8.0, 0.055957585);// O by fractional weight
321 mix->DefineElement(3, 1.00794, 1.0, 0.025146765);// H by fractional weight
322 mix->SetPressure(0.0 * fgkPascal);
323 mix->SetTemperature(25.0 * fgkCelsius);
324 mix->SetState(TGeoMaterial::kMatStateSolid);
330 med = new TGeoMedium("ITSspdCarbonFiber", medindex++, mix, params);
332 // air defined as a mixture of C-N-O-Ar:
333 // it is used to fill all containers
334 mix = new TGeoMixture("Air", 4, 1.20479E-3 * fgkgcm3);
335 mix->SetIndex(matindex);
336 mix->DefineElement(0, 12.0107, 6.0, 0.000124); // C by fractional weight
337 mix->DefineElement(1, 14.0067, 7.0, 0.755267); // N by fractional weight
338 mix->DefineElement(2, 15.9994, 8.0, 0.231781); // O by fractional weight
339 mix->DefineElement(3, 39.9480, 18.0, 0.012827); // Ar by fractional weight
340 mix->SetPressure(101325.0 * fgkPascal); // = 1 atmosphere
341 mix->SetTemperature(25.0 * fgkCelsius);
342 mix->SetState(TGeoMaterial::kMatStateGas);
343 params[3] = ktmaxfdAir;
344 params[4] = kstemaxAir;
345 params[5] = kdeemaxAir;
346 params[6] = kepsilAir;
347 params[7] = kstminAir;
348 med = new TGeoMedium("ITSspdAir", medindex++, mix, params);
350 // inox stainless steel, defined as a mixture
351 // used for all metallic parts
352 mix = new TGeoMixture("INOX", 9, 8.03 * fgkgcm3);
353 mix->SetIndex(matindex);
354 mix->DefineElement(0, 12.0107, 6., .0003); // C by fractional weight
355 mix->DefineElement(1, 54.9380, 25., .02); // Fe by fractional weight
356 mix->DefineElement(2, 28.0855, 14., .01); // Na by fractional weight
357 mix->DefineElement(3, 30.9738, 15., .00045); // P by fractional weight
358 mix->DefineElement(4, 32.066 , 16., .0003); // S by fractional weight
359 mix->DefineElement(5, 58.6928, 28., .12); // Ni by fractional weight
360 mix->DefineElement(6, 55.9961, 24., .17); // by fractional weight
361 mix->DefineElement(7, 95.84 , 42., .025); // by fractional weight
362 mix->DefineElement(8, 55.845 , 26., .654); // by fractional weight
363 mix->SetPressure(0.0 * fgkPascal);
364 mix->SetTemperature(25.0 * fgkCelsius);
365 mix->SetState(TGeoMaterial::kMatStateSolid);
366 params[3] = ktmaxfdAir;
367 params[4] = kstemaxAir;
368 params[5] = kdeemaxAir;
369 params[6] = kepsilAir;
370 params[7] = kstminAir;
371 med = new TGeoMedium("ITSspdStainlessSteel", medindex++, mix, params);
373 // freon gas which fills the cooling system (C+F)
374 mix = new TGeoMixture("Freon", 2, 1.63 * fgkgcm3);
375 mix->SetIndex(matindex);
376 mix->DefineElement(0, 12.0107 , 6.0, 4); // C by fractional weight
377 mix->DefineElement(1, 18.9984032, 9.0, 10); // F by fractional weight
378 mix->SetPressure(101325.0 * fgkPascal); // = 1 atmosphere
379 mix->SetTemperature(25.0 * fgkCelsius);
380 mix->SetState(TGeoMaterial::kMatStateLiquid);
381 params[3] = ktmaxfdAir;
382 params[4] = kstemaxAir;
383 params[5] = kdeemaxAir;
384 params[6] = kepsilAir;
385 params[7] = kstminAir;
386 med = new TGeoMedium("ITSspdCoolingFluid", medindex++, mix, params);
388 // return the next index to be used in case of adding new materials
389 medOffset = medindex;
390 matOffset = matindex;
393 //______________________________________________________________________
394 void AliITSv11GeometrySPD::InitSPDCentral(Int_t offset, TVirtualMC *vmc) const
397 // Do all SPD Central detector initializations (e.g.: transport cuts).
399 // Here follow some GEANT3 physics switches, which are interesting
400 // for these settings to be defined:
401 // - "MULTS" (MULtiple Scattering):
402 // the variable IMULS controls this process. See [PHYS320/325/328]
403 // 0 - No multiple scattering.
404 // 1 - (DEFAULT) Multiple scattering according to Moliere theory.
405 // 2 - Same as 1. Kept for backward compatibility.
406 // 3 - Pure Gaussian scattering according to the Rossi formula.
407 // - "DRAY" (Delta RAY production)
408 // The variable IDRAY controls this process. See [PHYS430]
409 // 0 - No delta rays production.
410 // 1 - (DEFAULT) Delta rays production with generation of.
411 // 2 - Delta rays production without generation of.
412 // - "LOSS" (continuous energy loss)
413 // The variable ILOSS controls this process.
414 // 0 - No continuous energy loss, IDRAY is set to 0.
415 // 1 - Continuous energy loss with generation of delta rays above
416 // DCUTE (common/GCUTS/) and restricted Landau fluctuations
418 // 2 - (DEFAULT) Continuous energy loss without generation of
420 // and full Landau-Vavilov-Gauss fluctuations.
421 // In this case the variable IDRAY is forced to 0 to avoid
422 // double counting of fluctuations.
423 // 3 - Same as 1, kept for backward compatibility.
424 // 4 - Energy loss without fluctuation.
425 // The value obtained from the tables is used directly.
428 // Int_t offset --> the material/medium index offset
429 // TVirtualMC *vmc --> pointer to the virtual Monte Carlo default gMC
435 vmc->Gstpar(i+offset, "CUTGAM", 30.0 * fgkKeV);
436 vmc->Gstpar(i+offset, "CUTELE", 30.0 * fgkKeV);
437 vmc->Gstpar(i+offset, "CUTNEU", 30.0 * fgkKeV);
438 vmc->Gstpar(i+offset, "CUTHAD", 30.0 * fgkKeV);
439 vmc->Gstpar(i+offset, "CUTMUO", 30.0 * fgkKeV);
440 vmc->Gstpar(i+offset, "BCUTE", 30.0 * fgkKeV);
441 vmc->Gstpar(i+offset, "BCUTM", 30.0 * fgkKeV);
442 vmc->Gstpar(i+offset, "DCUTE", 30.0 * fgkKeV);
443 vmc->Gstpar(i+offset, "DCUTM", 30.0 * fgkKeV);
444 //vmc->Gstpar(i+offset, "PPCUTM", );
445 //vmc->Gstpar(i+offset, "PAIR", );
446 //vmc->Gstpar(i+offset, "COMPT", );
447 //vmc->Gstpar(i+offset, "PHOT", );
448 //vmc->Gstpar(i+offset, "PFIS", );
449 vmc->Gstpar(i+offset, "DRAY", 1);
450 //vmc->Gstpar(i+offset, "ANNI", );
451 //vmc->Gstpar(i+offset, "BREM", );
452 //vmc->Gstpar(i+offset, "HADR", );
453 //vmc->Gstpar(i+offset, "MUNU", );
454 //vmc->Gstpar(i+offset, "DCAY", );
455 vmc->Gstpar(i+offset, "LOSS", 1);
456 //vmc->Gstpar(i+offset, "MULS", );
457 //vmc->Gstpar(i+offset, "GHCOR1", );
458 //vmc->Gstpar(i+offset, "BIRK1", );
459 //vmc->Gstpar(i+offset, "BRIK2", );
460 //vmc->Gstpar(i+offset, "BRIK3", );
461 //vmc->Gstpar(i+offset, "LABS", );
462 //vmc->Gstpar(i+offset, "SYNC", );
463 //vmc->Gstpar(i+offset, "STRA", );
466 //______________________________________________________________________
467 void AliITSv11GeometrySPD::SPDSector(TGeoVolume *moth, TGeoManager *mgr)
470 // Creates a single SPD carbon fiber sector and places it
471 // in a container volume passed as first argument ('moth').
472 // Second argument points to the TGeoManager which coordinates
473 // the overall volume creation.
474 // The position of the sector is based on distance of
475 // closest point of SPD stave to beam pipe
476 // (figures all-sections-modules.ps) of 7.22mm at section A-A.
481 <img src="http://alice.pd.infn.it/latestdr/Geometric-Revision/assembly.ps"
482 title="SPD Sector drawing with all cross sections defined">
483 <p>The SPD Sector definition. In
484 <a href="http://alice.pd.infn.it/latestdr/Geometric-Revision/assembly.hpgl">HPGL</a> format.
485 <img src="http://alice.pd.infn.it/latestdr/Geometric-Revision/assembly-10-modules.ps"
486 titile="SPD All Sectors end view with thermal sheald">
487 <p>The SPD all sector end view with thermal sheald.
488 <img src="http://alice.pd.infn.it/latestdr/Geometric-Revision/assembly.ps"
489 title="SPD side view cross section">
490 <p>SPD side view cross section with condes and thermal shealds.
491 <img src="http://alice.pd.infn.it/latestdr/Geometric-Revision/SECTION-A_A.jpg"
492 title="Cross section A-A"><p>Cross section A-A.
493 <img src="http://alice.pd.infn.it/latestdr/Geometric-Revision/SECTION-B_B.jpg"
494 title="Cross updated section A-A"><p>Cross updated section A-A.
495 <img src="http://physics.mps.ohio-state.edu/~nilsen/ITSfigures/Sezione_layerAA.pdf"
496 title="Cross section B-B"><p>Cross section B-B.
497 <img src="http://alice.pd.infn.it/latestdr/Geometric-Revision/SECTION-C_C.jpg"
498 title-"Cross section C-C"><p>Cross section C-C.
499 <img src="http://alice.pd.infn.it/latestdr/Geometric-Revision/SECTION-D_D.jpg"
500 title="Cross section D-D"><p>Cross section D-D.
501 <img src="http://alice.pd.infn.it/latestdr/Geometric-Revision/SECTION-E_E.jpg"
502 title="Cross section E-E"><p>Cross section E-E.
503 <img src="http://alice.pd.infn.it/latestdr/Geometric-Revision/SECTION-F_F.jpg"
504 title="Cross section F-F"><p>Cross section F-F.
505 <img src="http://alice.pd.infn.it/latestdr/Geometric-Revision/SECTION-G_G.jpg"
506 title="Cross section G-G"><p>Cross section G-G.
511 // TGeoVolume *moth Pointer to mother volume where this object
512 // is to be placed in
513 // TGeoManager *mgr Pointer to the TGeoManager used, defaule is
519 // Updated values for kSPDclossesStaveAA, kBeamPipeRadius, and
520 // staveThicknessAA are taken from
521 // http://physics.mps.ohio-state.edu/~nilsen/ITSfigures/Sezione_layerAA.pdf
523 const Double_t kSPDclossesStaveAA = 7.25* fgkmm;
524 const Double_t kSectorStartingAngle = -72.0 * fgkDegree;
525 const Int_t kNSectorsTotal = 10;
526 const Double_t kSectorRelativeAngle = 36.0 * fgkDegree; // = 360.0 / 10
527 const Double_t kBeamPipeRadius = 0.5 * 59.6 * fgkmm; // diam. = 59.6 mm
528 //const Double_t staveThicknessAA = 0.9 *fgkmm; // nominal thickness
529 const Double_t staveThicknessAA = 1.02 * fgkmm; // get from stave geometry.
532 Double_t angle, radiusSector, xAAtubeCenter0, yAAtubeCenter0;
533 TGeoCombiTrans *secRot = new TGeoCombiTrans(), *comrot;
534 TGeoVolume *vCarbonFiberSector;
535 TGeoMedium *medSPDcf;
537 // Define an assembly and fill it with the support of
538 // a single carbon fiber sector and staves in it
539 medSPDcf = GetMedium("SPD C (M55J)$", mgr);
540 vCarbonFiberSector = new TGeoVolumeAssembly("ITSSPDCarbonFiberSectorV");
541 vCarbonFiberSector->SetMedium(medSPDcf);
542 CarbonFiberSector(vCarbonFiberSector, xAAtubeCenter0, yAAtubeCenter0, mgr);
544 // Compute the radial shift out of the sectors
545 radiusSector = kBeamPipeRadius + kSPDclossesStaveAA + staveThicknessAA;
546 radiusSector = GetSPDSectorTranslation(fSPDsectorX0.At(1), fSPDsectorY0.At(1),
547 fSPDsectorX1.At(1), fSPDsectorY1.At(1), radiusSector);
548 //radiusSector *= radiusSector; // squaring;
549 //radiusSector -= xAAtubeCenter0 * xAAtubeCenter0;
550 //radiusSector = -yAAtubeCenter0 + TMath::Sqrt(radiusSector);
552 AliDebug(1, Form("SPDSector : radiusSector=%f\n",radiusSector));
554 AliDebug(1, Form("i= %d x0=%f y0=%f x1=%f y1=%f\n", i,
555 fSPDsectorX0.At(i), fSPDsectorY0.At(i),
556 fSPDsectorX1.At(i),fSPDsectorY1.At(i)));
558 // add 10 single sectors, by replicating the virtual sector defined above
559 // and placing at different angles
560 Double_t shiftX, shiftY, tub[2][6][3];
561 for(i=0;i<2;i++)for(j=0;j<6;j++)for(k=0;k<3;k++) tub[i][j][k] = fTubeEndSector[0][i][j][k];
562 angle = kSectorStartingAngle;
563 secRot->RotateZ(angle);
564 TGeoVolumeAssembly *vcenteral = new TGeoVolumeAssembly("ITSSPD");
565 moth->AddNode(vcenteral, 1, 0);
566 for(i = 0; i < kNSectorsTotal; i++) {
567 shiftX = -radiusSector * TMath::Sin(angle/fgkRadian);
568 shiftY = radiusSector * TMath::Cos(angle/fgkRadian);
569 //cout << "ANGLE = " << angle << endl;
570 shiftX += 0.1094 * TMath::Cos((angle + 196.)/fgkRadian);
571 shiftY += 0.1094 * TMath::Sin((angle + 196.)/fgkRadian);
574 //shiftX -= 0.11 * TMath::Cos(angle/fgkRadian); // add by Alberto
575 //shiftY -= 0.11 * TMath::Sin(angle/fgkRadian); // don't ask me where that 0.11 comes from!
576 secRot->SetDx(shiftX);
577 secRot->SetDy(shiftY);
578 comrot = new TGeoCombiTrans(*secRot);
579 vcenteral->AddNode(vCarbonFiberSector,i+1,comrot);
580 for(j=0;j<2;j++)for(k=0;k<6;k++) // Transform Tube ends for each sector
581 comrot->LocalToMaster(tub[j][k],fTubeEndSector[i][j][k]);
583 AliInfo(Form("i=%d angle=%g angle[rad]=%g radiusSector=%g "
584 "x=%g y=%g \n",i, angle, angle/fgkRadian,
585 radiusSector, shiftX, shiftY));
586 } // end if GetDebug(5)
587 angle += kSectorRelativeAngle;
588 secRot->RotateZ(kSectorRelativeAngle);
590 if(GetDebug(3)) moth->PrintNodes();
595 //______________________________________________________________________
596 void AliITSv11GeometrySPD::CarbonFiberSector(TGeoVolume *moth,
597 Double_t &xAAtubeCenter0, Double_t &yAAtubeCenter0, TGeoManager *mgr)
600 // Define the detail SPD Carbon fiber support Sector geometry.
601 // Based on the drawings:
603 http:///QA-construzione-profilo-modulo.ps
605 // - ALICE-Pixel "Costruzione Profilo Modulo" (march 25 2004)
606 // - ALICE-SUPPORTO "Costruzione Profilo Modulo"
608 // Define outside radii as negative, where "outside" means that the
609 // center of the arc is outside of the object (feb 16 2004).
611 // Arguments [the one passed by ref contain output values]:
613 // TGeoVolume *moth the voulme which will contain this object
614 // TGeoManager *mgr TGeo builder defauls is gGeoManager
616 // Double_t &xAAtubeCenter0 (by ref) x location of the outer surface
617 // of the cooling tube center for tube 0.
618 // Double_t &yAAtubeCenter0 (by ref) y location of the outer surface
619 // of the cooling tube center for tube 0.
623 // Int the two variables passed by reference values will be stored
624 // which will then be used to correctly locate this sector.
625 // The information used for this is the distance between the
626 // center of the #0 detector and the beam pipe.
627 // Measurements are taken at cross section A-A.
630 //TGeoMedium *medSPDfs = 0;//SPD support cone inserto stesalite 4411w
631 //TGeoMedium *medSPDfo = 0;//SPD support cone foam, Rohacell 50A.
632 //TGeoMedium *medSPDal = 0;//SPD support cone SDD mounting bracket Al
633 TGeoMedium *medSPDcf = GetMedium("SPD C (M55J)$", mgr);
634 TGeoMedium *medSPDss = GetMedium("INOX$", mgr);
635 TGeoMedium *medSPDair = GetMedium("AIR$", mgr);
636 TGeoMedium *medSPDcoolfl = GetMedium("Freon$", mgr); //ITSspdCoolingFluid
638 const Double_t ksecDz = 0.5 * 500.0 * fgkmm;
639 //const Double_t ksecLen = 30.0 * fgkmm;
640 const Double_t ksecCthick = 0.2 * fgkmm;
641 const Double_t ksecDipLength = 3.2 * fgkmm;
642 const Double_t ksecDipRadii = 0.4 * fgkmm;
643 //const Double_t ksecCoolingTubeExtraDepth = 0.86 * fgkmm;
645 // The following positions ('ksecX#' and 'ksecY#') and radii ('ksecR#')
646 // are the centers and radii of curvature of all the rounded corners
647 // between the straight borders of the SPD sector shape.
648 // To draw this SPD sector, the following steps are followed:
649 // 1) the (ksecX, ksecY) points are plotted
650 // and circles of the specified radii are drawn around them.
651 // 2) each pair of consecutive circles is connected by a line
652 // tangent to them, in accordance with the radii being "internal"
653 // or "external" with respect to the closed shape which describes
654 // the sector itself.
655 // The resulting connected shape is the section
656 // of the SPD sector surface in the transverse plane (XY).
658 const Double_t ksecX0 = -10.725 * fgkmm;
659 const Double_t ksecY0 = -14.853 * fgkmm;
660 const Double_t ksecR0 = -0.8 * fgkmm; // external
661 const Double_t ksecX1 = -13.187 * fgkmm;
662 const Double_t ksecY1 = -19.964 * fgkmm;
663 const Double_t ksecR1 = +0.6 * fgkmm; // internal // (modif. by Alberto)
664 //const Double_t ksecR1 = +0.8 * fgkmm; // internal // (modif. by Alberto)
666 // const Double_t ksecDip0 = 5.9 * fgkmm;
668 //const Double_t ksecX2 = -3.883 * fgkmm;
669 const Double_t ksecX2 = -3.833 * fgkmm; // (corr. by Alberto)
670 const Double_t ksecY2 = -17.805 * fgkmm;
671 const Double_t ksecR2 = +0.6 * fgkmm; // internal (guess)
672 const Double_t ksecX3 = -3.123 * fgkmm;
673 const Double_t ksecY3 = -14.618 * fgkmm;
674 const Double_t ksecR3 = -0.6 * fgkmm; // external
675 //const Double_t ksecDip1 = 8.035 * fgkmm;
677 const Double_t ksecX4 = +11.280 * fgkmm;
678 const Double_t ksecY4 = -14.473 * fgkmm;
679 const Double_t ksecR4 = +0.8 * fgkmm; // internal
680 const Double_t ksecX5 = +19.544 * fgkmm;
681 const Double_t ksecY5 = +10.961 * fgkmm;
682 const Double_t ksecR5 = +0.8 * fgkmm; // internal
683 //const Double_t ksecDip2 = 4.553 * fgkmm;
685 const Double_t ksecX6 = +10.830 * fgkmm;
686 const Double_t ksecY6 = +16.858 * fgkmm;
687 const Double_t ksecR6 = +0.6 * fgkmm; // internal
688 const Double_t ksecX7 = +11.581 * fgkmm;
689 const Double_t ksecY7 = +13.317 * fgkmm;
690 const Double_t ksecR7 = -0.6 * fgkmm; // external
691 //const Double_t ksecDip3 = 6.978 * fgkmm;
693 const Double_t ksecX8 = -0.733 * fgkmm;
694 const Double_t ksecY8 = +17.486 * fgkmm;
695 const Double_t ksecR8 = +0.6 * fgkmm; // internal
696 const Double_t ksecX9 = +0.562 * fgkmm;
697 //const Double_t ksecY9 = +14.486 * fgkmm; // correction by
698 const Double_t ksecY9 = +14.107 * fgkmm; // Alberto
699 const Double_t ksecR9 = -0.6 * fgkmm; // external
700 //const Double_t ksecDip4 = 6.978 * fgkmm;
702 const Double_t ksecX10 = -12.252 * fgkmm;
703 const Double_t ksecY10 = +16.298 * fgkmm;
704 const Double_t ksecR10 = +0.6 * fgkmm; // internal
705 const Double_t ksecX11 = -10.445 * fgkmm;
706 const Double_t ksecY11 = +13.162 * fgkmm;
707 const Double_t ksecR11 = -0.6 * fgkmm; // external
708 //const Double_t ksecDip5 = 6.978 * fgkmm;
710 const Double_t ksecX12 = -22.276 * fgkmm;
711 const Double_t ksecY12 = +12.948 * fgkmm;
712 const Double_t ksecR12 = +0.85 * fgkmm; // internal
713 const Double_t ksecR13 = -0.8 * fgkmm; // external
714 const Double_t ksecAngleSide13 = 36.0 * fgkDegree;
716 const Int_t ksecNRadii = 20;
717 const Int_t ksecNPointsPerRadii = 4;
718 const Int_t ksecNCoolingTubeDips = 6;
720 // Since the rounded parts are approximated by a regular polygon
721 // and a cooling tube of the propper diameter must fit, a scaling factor
722 // increases the size of the polygon for the tube to fit.
723 //const Double_t ksecRCoolScale = 1./TMath::Cos(TMath::Pi()/
724 // (Double_t)ksecNPointsPerRadii);
725 const Double_t ksecZEndLen = 30.000 * fgkmm;
726 //const Double_t ksecZFlangLen = 45.000 * fgkmm;
727 const Double_t ksecTl = 0.860 * fgkmm;
728 const Double_t ksecCthick2 = 0.600 * fgkmm;
729 //const Double_t ksecCthick3 = 1.80 * fgkmm;
730 //const Double_t ksecSidelen = 22.0 * fgkmm;
731 //const Double_t ksecSideD5 = 3.679 * fgkmm;
732 //const Double_t ksecSideD12 = 7.066 * fgkmm;
733 const Double_t ksecRCoolOut = 2.400 * fgkmm;
734 const Double_t ksecRCoolIn = 2.000 * fgkmm;
735 const Double_t ksecDl1 = 5.900 * fgkmm;
736 const Double_t ksecDl2 = 8.035 * fgkmm;
737 const Double_t ksecDl3 = 4.553 * fgkmm;
738 const Double_t ksecDl4 = 6.978 * fgkmm;
739 const Double_t ksecDl5 = 6.978 * fgkmm;
740 const Double_t ksecDl6 = 6.978 * fgkmm;
741 const Double_t ksecCoolTubeThick = 0.04 * fgkmm;
742 const Double_t ksecCoolTubeROuter = 2.6 * fgkmm;
743 const Double_t ksecCoolTubeFlatX = 3.696 * fgkmm;
744 const Double_t ksecCoolTubeFlatY = 0.68 * fgkmm;
745 //const Double_t ksecBeamX0 = 0.0 * fgkmm; // guess
746 //const Double_t ksecBeamY0 = (15.223 + 40.) * fgkmm; // guess
748 // redefine some of the points already defined above
749 // in the format of arrays (???)
750 const Int_t ksecNPoints = (ksecNPointsPerRadii + 1) * ksecNRadii + 8;
751 Double_t secX[ksecNRadii] = {
752 ksecX0, ksecX1, -1000.0,
753 ksecX2, ksecX3, -1000.0,
754 ksecX4, ksecX5, -1000.0,
755 ksecX6, ksecX7, -1000.0,
756 ksecX8, ksecX9, -1000.0,
757 ksecX10, ksecX11, -1000.0,
760 Double_t secY[ksecNRadii] = {
761 ksecY0, ksecY1, -1000.0,
762 ksecY2, ksecY3, -1000.0,
763 ksecY4, ksecY5, -1000.0,
764 ksecY6, ksecY7, -1000.0,
765 ksecY8, ksecY9, -1000.0,
766 ksecY10, ksecY11, -1000.0,
769 Double_t secR[ksecNRadii] = {
770 ksecR0, ksecR1, -.5 * ksecDipLength - ksecDipRadii,
771 ksecR2, ksecR3, -.5 * ksecDipLength - ksecDipRadii,
772 ksecR4, ksecR5, -.5 * ksecDipLength - ksecDipRadii,
773 ksecR6, ksecR7, -.5 * ksecDipLength - ksecDipRadii,
774 ksecR8, ksecR9, -.5 * ksecDipLength - ksecDipRadii,
775 ksecR10, ksecR11, -.5 * ksecDipLength - ksecDipRadii,
779 Double_t secDip[ksecNRadii] = {
780 0., 0., ksecDip0, 0., 0., ksecDip1,
781 0., 0., ksecDip2, 0., 0., ksecDip3,
782 0., 0., ksecDip4, 0., 0., ksecDip5,
786 Double_t secX2[ksecNRadii];
787 Double_t secY2[ksecNRadii];
788 Double_t secR2[ksecNRadii] = {
789 ksecR0, ksecR1, ksecRCoolOut,
790 ksecR2, ksecR3, ksecRCoolOut,
791 ksecR4, ksecR5, ksecRCoolOut,
792 ksecR6, ksecR7, ksecRCoolOut,
793 ksecR8, ksecR9, ksecRCoolOut,
794 ksecR10, ksecR11, ksecRCoolOut,
797 Double_t secDip2[ksecNCoolingTubeDips] = {
798 ksecDl1, ksecDl2, ksecDl3,
799 ksecDl4, ksecDl5, ksecDl6
801 Double_t secX3[ksecNRadii];
802 Double_t secY3[ksecNRadii];
803 const Int_t ksecDipIndex[ksecNCoolingTubeDips] = {2, 5, 8, 11, 14, 17};
804 Double_t secAngleStart[ksecNRadii];
805 Double_t secAngleEnd[ksecNRadii];
806 Double_t secAngleStart2[ksecNRadii];
807 Double_t secAngleEnd2[ksecNRadii];
808 Double_t secAngleTurbo[ksecNCoolingTubeDips] = {0., 0., 0., 0., 0., 0.0};
809 //Double_t secAngleStart3[ksecNRadii];
810 //Double_t secAngleEnd3[ksecNRadii];
811 Double_t xpp[ksecNPoints], ypp[ksecNPoints];
812 Double_t xpp2[ksecNPoints], ypp2[ksecNPoints];
813 Double_t *xp[ksecNRadii], *xp2[ksecNRadii];
814 Double_t *yp[ksecNRadii], *yp2[ksecNRadii];
815 TGeoXtru *sA0, *sA1, *sB0, *sB1,*sB2;
817 TGeoEltu *sTA0, *sTA1;
818 TGeoTube *sTB0, *sTB1; //,*sM0;
820 TGeoTranslation *trans;
821 TGeoCombiTrans *rotrans;
822 Double_t t, t0, t1, a, b, x0, y0,z0, x1, y1;
827 AliError("Container volume (argument) is NULL");
830 for(i = 0; i < ksecNRadii; i++) {
831 xp[i] = &(xpp[i*(ksecNPointsPerRadii+1)]);
832 yp[i] = &(ypp[i*(ksecNPointsPerRadii+1)]);
833 xp2[i] = &(xpp2[i*(ksecNPointsPerRadii+1)]);
834 yp2[i] = &(ypp2[i*(ksecNPointsPerRadii+1)]);
841 // find starting and ending angles for all but cooling tube sections
842 secAngleStart[0] = 0.5 * ksecAngleSide13;
843 for(i = 0; i < ksecNRadii - 2; i++) {
845 for(j=0;j<ksecNCoolingTubeDips;j++) tst = (tst||i==ksecDipIndex[j]);
848 for(j=0;j<ksecNCoolingTubeDips;j++) tst =(tst||(i+1)==ksecDipIndex[j]);
849 if (tst) j = i+2; else j = i+1;
850 AnglesForRoundedCorners(secX[i],secY[i],secR[i],secX[j],secY[j],
853 secAngleStart[j] = t1;
854 if(secR[i] > 0.0 && secR[j] > 0.0) {
855 if(secAngleStart[i] > secAngleEnd[i]) secAngleEnd[i] += 360.0;
856 } // end if(secR[i]>0.0 && secR[j]>0.0)
857 secAngleStart2[i] = secAngleStart[i];
858 secAngleEnd2[i] = secAngleEnd[i];
860 secAngleEnd[ksecNRadii-2] = secAngleStart[ksecNRadii-2] +
861 (secAngleEnd[ksecNRadii-5] - secAngleStart[ksecNRadii-5]);
862 if (secAngleEnd[ksecNRadii-2] < 0.0) secAngleEnd[ksecNRadii-2] += 360.0;
863 secAngleStart[ksecNRadii-1] = secAngleEnd[ksecNRadii-2] - 180.0;
864 secAngleEnd[ksecNRadii-1] = secAngleStart[0];
865 secAngleStart2[ksecNRadii-2] = secAngleStart[ksecNRadii-2];
866 secAngleEnd2[ksecNRadii-2] = secAngleEnd[ksecNRadii-2];
867 secAngleStart2[ksecNRadii-1] = secAngleStart[ksecNRadii-1];
868 secAngleEnd2[ksecNRadii-1] = secAngleEnd[ksecNRadii-1];
870 // find location of circle last rounded corner.
873 t0 = TanD(secAngleStart[i]-90.);
874 t1 = TanD(secAngleEnd[j]-90.);
875 t = secY[i] - secY[j];
876 // NOTE: secR[i=0] < 0; secR[j=18] > 0; and secR[j+1=19] < 0
877 t += (-secR[i]+secR[j+1]) * SinD(secAngleStart[i]);
878 t -= (secR[j]-secR[j+1]) * SinD(secAngleEnd[j]);
879 t += t1 * secX[j] - t0*secX[i];
880 t += t1 * (secR[j] - secR[j+1]) * CosD(secAngleEnd[j]);
881 t -= t0 * (-secR[i]+secR[j+1]) * CosD(secAngleStart[i]);
882 secX[ksecNRadii-1] = t / (t1-t0);
883 secY[ksecNRadii-1] = TanD(90.0+0.5*ksecAngleSide13)*
884 (secX[ksecNRadii-1]-secX[0])+secY[0];
885 secX2[ksecNRadii-1] = secX[ksecNRadii-1];
886 secY2[ksecNRadii-1] = secY[ksecNRadii-1];
887 secX3[ksecNRadii-1] = secX[ksecNRadii-1];
888 secY3[ksecNRadii-1] = secY[ksecNRadii-1];
890 // find location of cooling tube centers
891 for(i = 0; i < ksecNCoolingTubeDips; i++) {
893 x0 = secX[j-1] + TMath::Abs(secR[j-1]) * CosD(secAngleEnd[j-1]);
894 y0 = secY[j-1] + TMath::Abs(secR[j-1]) * SinD(secAngleEnd[j-1]);
895 x1 = secX[j+1] + TMath::Abs(secR[j+1]) * CosD(secAngleStart[j+1]);
896 y1 = secY[j+1] + TMath::Abs(secR[j+1]) * SinD(secAngleStart[j+1]);
897 t0 = TMath::Sqrt((x0-x1)*(x0-x1)+(y0-y1)*(y0-y1));
902 // get location of tube center->Surface for locating
903 // this sector around the beam pipe.
904 // This needs to be double checked, but I need my notes for that.
906 xAAtubeCenter0 = x0 + (x1 - x0) * t * 0.5;
907 yAAtubeCenter0 = y0 + (y1 - y0) * t * 0.5;
909 if(a + b*(a - x0) / (b - y0) > 0.0) {
910 secX[j] = a + TMath::Abs(y1-y0) * 2.0 * ksecDipRadii/t0;
911 secY[j] = b - TMath::Sign(2.0*ksecDipRadii,y1-y0) * (x1-x0)/t0;
912 secX2[j] = a + TMath::Abs(y1-y0) * ksecTl/t0;
913 secY2[j] = b - TMath::Sign(ksecTl,y1-y0) * (x1-x0) / t0;
914 secX3[j] = a + TMath::Abs(y1-y0) *
915 (2.0*ksecDipRadii-0.5*ksecCoolTubeFlatY)/t0;
916 secY3[j] = b - TMath::Sign(2.0*ksecDipRadii-0.5*ksecCoolTubeFlatY,
919 secX[j] = a - TMath::Abs(y1-y0)*2.0*ksecDipRadii/t0;
920 secY[j] = b + TMath::Sign(2.0*ksecDipRadii,y1-y0)*(x1-x0)/t0;
921 secX2[j] = a - TMath::Abs(y1-y0)*ksecTl/t0;
922 secY2[j] = b + TMath::Sign(ksecTl,y1-y0)*(x1-x0)/t0;
923 secX3[j] = a - TMath::Abs(y1-y0)*(2.0*ksecDipRadii-0.5*
924 ksecCoolTubeFlatY)/t0;
925 secY3[j] = b + TMath::Sign(2.0*ksecDipRadii-0.5*ksecCoolTubeFlatY,
927 } // end if(a+b*(a-x0)/(b-y0)>0.0)
929 // Set up Start and End angles to correspond to start/end of dips.
930 t1 = (secDip2[i]-TMath::Abs(secR[j])) / t0;
931 secAngleStart[j] =TMath::RadToDeg()*TMath::ATan2(y0+(y1-y0)*t1-secY[j],
932 x0+(x1-x0)*t1-secX[j]);
933 if (secAngleStart[j]<0.0) secAngleStart[j] += 360.0;
934 secAngleStart2[j] = secAngleStart[j];
935 t1 = (secDip2[i]+TMath::Abs(secR[j]))/t0;
936 secAngleEnd[j] = TMath::RadToDeg()*TMath::ATan2(y0+(y1-y0)*t1-secY[j],
937 x0+(x1-x0)*t1-secX[j]);
938 if (secAngleEnd[j]<0.0) secAngleEnd[j] += 360.0;
939 secAngleEnd2[j] = secAngleEnd[j];
940 if (secAngleEnd[j]>secAngleStart[j]) secAngleEnd[j] -= 360.0;
941 secR[j] = TMath::Sqrt(secR[j]*secR[j]+4.0*ksecDipRadii*ksecDipRadii);
945 secAngleStart2[8] -= 360.;
946 secAngleStart2[11] -= 360.;
948 SPDsectorShape(ksecNRadii, secX, secY, secR, secAngleStart, secAngleEnd,
949 ksecNPointsPerRadii, m, xp, yp);
951 // Fix up dips to be square.
952 for(i = 0; i < ksecNCoolingTubeDips; i++) {
954 t = 0.5*ksecDipLength+ksecDipRadii;
955 t0 = TMath::RadToDeg()*TMath::ATan(2.0*ksecDipRadii/t);
956 t1 = secAngleEnd[j] + t0;
957 t0 = secAngleStart[j] - t0;
958 x0 = xp[j][1] = secX[j] + t*CosD(t0);
959 y0 = yp[j][1] = secY[j] + t*SinD(t0);
960 x1 = xp[j][ksecNPointsPerRadii-1] = secX[j] + t*CosD(t1);
961 y1 = yp[j][ksecNPointsPerRadii-1] = secY[j] + t*SinD(t1);
962 t0 = 1./((Double_t)(ksecNPointsPerRadii-2));
963 for(k = 2; k < ksecNPointsPerRadii - 1; k++) {
964 // extra points spread them out.
965 t = ((Double_t)(k-1)) * t0;
966 xp[j][k] = x0+(x1-x0) * t;
967 yp[j][k] = y0+(y1-y0) * t;
969 secAngleTurbo[i] = -TMath::RadToDeg() * TMath::ATan2(y1-y0, x1-x0);
972 Form("i=%d -- angle=%f -- x0,y0=(%f, %f) -- x1,y1=(%f, %f)",
973 i, secAngleTurbo[i], x0, y0, x1, y1));
974 } // end if GetDebug(3)
976 sA0 = new TGeoXtru(2);
977 sA0->SetName("ITS SPD Carbon fiber support Sector A0");
978 sA0->DefinePolygon(m, xpp, ypp);
979 sA0->DefineSection(0, -ksecDz);
980 sA0->DefineSection(1, ksecDz);
982 // store the edges of each XY segment which defines
983 // one of the plane zones where staves will have to be placed
984 fSPDsectorX0.Set(ksecNCoolingTubeDips);
985 fSPDsectorY0.Set(ksecNCoolingTubeDips);
986 fSPDsectorX1.Set(ksecNCoolingTubeDips);
987 fSPDsectorY1.Set(ksecNCoolingTubeDips);
989 for(i = 0; i < ksecNCoolingTubeDips; i++) {
990 // Find index in xpp[] and ypp[] corresponding to where the
991 // SPD ladders are to be attached. Order them according to
992 // the ALICE numbering schema. Using array of indexes (+-1 for
993 // cooling tubes. For any "bend/dip/edge, there are
994 // ksecNPointsPerRadii+1 points involved.
996 else if (i == 1) j = 0;
998 ixy0 = (ksecDipIndex[j]-1)*(ksecNPointsPerRadii+1)+
999 (ksecNPointsPerRadii);
1000 ixy1 = (ksecDipIndex[j]+1) * (ksecNPointsPerRadii+1);
1001 fSPDsectorX0[i] = sA0->GetX(ixy0);
1002 fSPDsectorY0[i] = sA0->GetY(ixy0);
1003 fSPDsectorX1[i] = sA0->GetX(ixy1);
1004 fSPDsectorY1[i] = sA0->GetY(ixy1);
1007 //printf("SectorA#%d ",0);
1008 InsidePoint(xpp[m-1],ypp[m-1],xpp[0],ypp[0],xpp[1],ypp[1],ksecCthick,
1010 for(i = 1; i < m - 1; i++) {
1011 j = i / (ksecNPointsPerRadii+1);
1012 //printf("SectorA#%d ",i);
1013 InsidePoint(xpp[i-1],ypp[i-1],xpp[i],ypp[i],xpp[i+1],ypp[i+1],
1014 ksecCthick,xpp2[i],ypp2[i]);
1016 //printf("SectorA#%d ",m);
1017 InsidePoint(xpp[m-2],ypp[m-2],xpp[m-1],ypp[m-1],xpp[0],ypp[0],
1018 ksecCthick,xpp2[m-1],ypp2[m-1]);
1019 // Fix center value of cooling tube dip and
1020 // find location of cooling tube centers
1021 for(i = 0; i < ksecNCoolingTubeDips; i++) {
1022 j = ksecDipIndex[i];
1025 x1 = xp2[j][ksecNPointsPerRadii-1];
1026 y1 = yp2[j][ksecNPointsPerRadii-1];
1027 t0 = TMath::Sqrt((x0-x1)*(x0-x1)+(y0-y1)*(y0-y1));
1029 for(k = 2; k < ksecNPointsPerRadii - 1; k++) {
1030 // extra points spread them out.
1031 t = ((Double_t)(k-1)) * t0;
1032 xp2[j][k] = x0+(x1-x0) * t;
1033 yp2[j][k] = y0+(y1-y0) * t;
1036 sA1 = new TGeoXtru(2);
1037 sA1->SetName("ITS SPD Carbon fiber support Sector Air A1");
1038 sA1->DefinePolygon(m, xpp2, ypp2);
1039 sA1->DefineSection(0, -ksecDz);
1040 sA1->DefineSection(1, ksecDz);
1042 // Error in TGeoEltu. Semi-axis X must be < Semi-axis Y (?).
1043 sTA0 = new TGeoEltu("ITS SPD Cooling Tube TA0", 0.5 * ksecCoolTubeFlatY,
1044 0.5 * ksecCoolTubeFlatX, ksecDz);
1045 sTA1 = new TGeoEltu("ITS SPD Cooling Tube coolant TA1",
1046 sTA0->GetA() - ksecCoolTubeThick,
1047 sTA0->GetB()-ksecCoolTubeThick,ksecDz);
1048 SPDsectorShape(ksecNRadii,secX2,secY2,secR2,secAngleStart2,secAngleEnd2,
1049 ksecNPointsPerRadii, m, xp, yp);
1050 sB0 = new TGeoXtru(2);
1051 sB0->SetName("ITS SPD Carbon fiber support Sector End B0");
1052 sB0->DefinePolygon(m, xpp, ypp);
1053 sB0->DefineSection(0, ksecDz);
1054 sB0->DefineSection(1, ksecDz + ksecZEndLen);
1056 //printf("SectorB#%d ",0);
1057 InsidePoint(xpp[m-1],ypp[m-1],xpp[0],ypp[0],xpp[1],ypp[1],
1058 ksecCthick2,xpp2[0],ypp2[0]);
1059 for(i = 1; i < m - 1; i++) {
1061 for(k = 0; k < ksecNCoolingTubeDips; k++)
1062 if((i/(ksecNPointsPerRadii+1))==ksecDipIndex[k])
1063 if(!(ksecDipIndex[k]*(ksecNPointsPerRadii+1) == i ||
1064 ksecDipIndex[k]*(ksecNPointsPerRadii+1) +
1065 ksecNPointsPerRadii == i))
1066 t = ksecRCoolOut-ksecRCoolIn;
1067 //printf("SectorB#%d ",i);
1068 InsidePoint(xpp[i-1],ypp[i-1],xpp[i],ypp[i],xpp[i+1],ypp[i+1],t,
1071 //printf("SectorB#%d ",m);
1072 InsidePoint(xpp[m-2],ypp[m-2],xpp[m-1],ypp[m-1],xpp[0],ypp[0],
1073 ksecCthick2,xpp2[m-1],ypp2[m-1]);
1074 sB1 = new TGeoXtru(2);
1075 sB1->SetName("ITS SPD Carbon fiber support Sector Air End B1");
1076 sB1->DefinePolygon(m, xpp2, ypp2);
1077 sB1->DefineSection(0,sB0->GetZ(0));
1078 sB1->DefineSection(1,sB0->GetZ(1)-ksecCthick2);
1079 const Double_t kspdEndHoleRadius1=5.698*fgkmm;
1080 const Double_t kspdEndHoleRadius2=2.336*fgkmm;
1081 const Double_t kspdEndHoleDisplacement=6.29*fgkmm;
1084 t= ((Double_t)i)/((Double_t)(k));
1085 if(!CFHolePoints(t,kspdEndHoleRadius1,kspdEndHoleRadius2,
1086 kspdEndHoleDisplacement,xpp2[i],ypp2[i])){
1087 Warning("CarbonFiberSector","CFHolePoints failed "
1088 "i=%d m=%d k=%d t=%e",i,m,k,t);
1090 // simitry in each quadrant.
1091 xpp2[2*k-i] = -xpp2[i];
1092 ypp2[2*k-i] = ypp2[i];
1093 xpp2[2*k+i] = -xpp2[i];
1094 ypp2[2*k+i] = -ypp2[i];
1095 xpp2[4*k-i] = xpp2[i];
1096 ypp2[4*k-i] = -ypp2[i];
1098 //xpp2[m-1] = xpp2[0]; // begining point in
1099 //ypp2[m-1] = ypp2[0]; // comment with end point
1100 sB2 = new TGeoXtru(2);
1101 sB2->SetName("ITS SPD Hole in Carbon fiber support End plate");
1102 sB2->DefinePolygon(4*k, xpp2, ypp2);
1103 sB2->DefineSection(0,sB1->GetZ(1));
1104 sB2->DefineSection(1,sB0->GetZ(1));
1105 // SPD sector mount blocks
1106 const Double_t kMountBlock[3] = {0.5*(1.8-0.2)*fgkmm,0.5*22.0*fgkmm,
1108 sB3 = new TGeoBBox((Double_t*)kMountBlock);
1109 // SPD sector cooling tubes
1110 sTB0 = new TGeoTube("ITS SPD Cooling Tube End TB0", 0.0,
1111 0.5*ksecCoolTubeROuter,0.5*(sB1->GetZ(1)-sB1->GetZ(0)));
1112 sTB1 = new TGeoTube("ITS SPD Cooling Tube End coolant TB0", 0.0,
1113 sTB0->GetRmax() - ksecCoolTubeThick,sTB0->GetDz());
1116 if(medSPDcf) medSPDcf->Dump(); else AliInfo("medSPDcf = 0");
1117 if(medSPDss) medSPDss->Dump(); else AliInfo("medSPDss = 0");
1118 if(medSPDair) medSPDair->Dump(); else AliInfo("medSPDAir = 0");
1119 if(medSPDcoolfl) medSPDcoolfl->Dump();else AliInfo("medSPDcoolfl = 0");
1120 sA0->InspectShape();
1121 sA1->InspectShape();
1122 sB0->InspectShape();
1123 sB1->InspectShape();
1124 sB2->InspectShape();
1125 } // end if(GetDebug(3))
1127 // create the assembly of the support and place staves on it
1128 TGeoVolumeAssembly *vM0 = new TGeoVolumeAssembly(
1129 "ITSSPDSensitiveVirtualvolumeM0");
1130 StavesInSector(vM0);
1131 // create other volumes with some graphical settings
1132 TGeoVolume *vA0 = new TGeoVolume("ITSSPDCarbonFiberSupportSectorA0",
1134 vA0->SetVisibility(kTRUE);
1135 vA0->SetLineColor(4); // Blue
1136 vA0->SetLineWidth(1);
1137 vA0->SetFillColor(vA0->GetLineColor());
1138 vA0->SetFillStyle(4010); // 10% transparent
1139 TGeoVolume *vA1 = new TGeoVolume("ITSSPDCarbonFiberSupportSectorAirA1",
1141 vA1->SetVisibility(kTRUE);
1142 vA1->SetLineColor(7); // light Blue
1143 vA1->SetLineWidth(1);
1144 vA1->SetFillColor(vA1->GetLineColor());
1145 vA1->SetFillStyle(4090); // 90% transparent
1146 TGeoVolume *vTA0 = new TGeoVolume("ITSSPDCoolingTubeTA0", sTA0, medSPDss);
1147 vTA0->SetVisibility(kTRUE);
1148 vTA0->SetLineColor(15); // gray
1149 vTA0->SetLineWidth(1);
1150 vTA0->SetFillColor(vTA0->GetLineColor());
1151 vTA0->SetFillStyle(4000); // 0% transparent
1152 TGeoVolume *vTA1 = new TGeoVolume("ITSSPDCoolingTubeFluidTA1",
1153 sTA1, medSPDcoolfl);
1154 vTA1->SetVisibility(kTRUE);
1155 vTA1->SetLineColor(6); // Purple
1156 vTA1->SetLineWidth(1);
1157 vTA1->SetFillColor(vTA1->GetLineColor());
1158 vTA1->SetFillStyle(4000); // 0% transparent
1159 TGeoVolume *vB0 = new TGeoVolume("ITSSPDCarbonFiberSupportSectorEndB0",
1161 vB0->SetVisibility(kTRUE);
1162 vB0->SetLineColor(1); // Black
1163 vB0->SetLineWidth(1);
1164 vB0->SetFillColor(vB0->GetLineColor());
1165 vB0->SetFillStyle(4000); // 0% transparent
1166 TGeoVolume *vB1 = new TGeoVolume("ITSSPDCarbonFiberSupportSectorEndAirB1",
1168 vB1->SetVisibility(kTRUE);
1169 vB1->SetLineColor(0); // white
1170 vB1->SetLineWidth(1);
1171 vB1->SetFillColor(vB1->GetLineColor());
1172 vB1->SetFillStyle(4100); // 100% transparent
1173 TGeoVolume *vB2 = new TGeoVolume("ITSSPDCarbonFiberSupportSectorEndAirB2",
1175 vB2->SetVisibility(kTRUE);
1176 vB2->SetLineColor(0); // white
1177 vB2->SetLineWidth(1);
1178 vB2->SetFillColor(vB2->GetLineColor());
1179 vB2->SetFillStyle(4100); // 100% transparent
1180 TGeoVolume *vB3 = new TGeoVolume(
1181 "ITSSPDCarbonFiberSupportSectorMountBlockB3",sB3, medSPDcf);
1182 vB3->SetVisibility(kTRUE);
1183 vB3->SetLineColor(1); // Black
1184 vB3->SetLineWidth(1);
1185 vB3->SetFillColor(vB3->GetLineColor());
1186 vB3->SetFillStyle(4000); // 0% transparent
1187 TGeoVolume *vTB0 = new TGeoVolume("ITSSPDCoolingTubeEndTB0",sTB0,medSPDss);
1188 vTB0->SetVisibility(kTRUE);
1189 vTB0->SetLineColor(15); // gray
1190 vTB0->SetLineWidth(1);
1191 vTB0->SetFillColor(vTB0->GetLineColor());
1192 vTB0->SetFillStyle(4000); // 0% transparent
1193 TGeoVolume *vTB1 = new TGeoVolume("ITSSPDCoolingTubeEndFluidTB1",sTB1,
1195 vTB1->SetVisibility(kTRUE);
1196 vTB1->SetLineColor(7); // light blue
1197 vTB1->SetLineWidth(1);
1198 vTB1->SetFillColor(vTB1->GetLineColor());
1199 vTB1->SetFillStyle(4050); // 0% transparent
1201 // add volumes to mother container passed as argument of this method
1202 moth->AddNode(vM0,1,0); // Add virtual volume to mother
1203 vA0->AddNode(vA1,1,0); // Put air inside carbon fiber.
1204 vB0->AddNode(vB1,1,0); // Put air inside carbon fiber ends.
1205 vB0->AddNode(vB2,1,0); // Put air wholes inside carbon fiber ends
1206 vTA0->AddNode(vTA1,1,0); // Put cooling liquid indide tube middel.
1207 vTB0->AddNode(vTB1,1,0); // Put cooling liquid inside tube end.
1208 Double_t tubeEndLocal[3]={0.0,0.0,sTA0->GetDz()};
1209 for(i = 0; i < ksecNCoolingTubeDips; i++) {
1210 x0 = secX3[ksecDipIndex[i]];
1211 y0 = secY3[ksecDipIndex[i]];
1212 t = 90.0 - secAngleTurbo[i];
1213 trans = new TGeoTranslation("",x0,y0,0.5*(sB1->GetZ(0)+sB1->GetZ(1)));
1214 vB1->AddNode(vTB0, i+1, trans);
1215 // Find location of tube ends for later use.
1216 trans->LocalToMaster(tubeEndLocal,fTubeEndSector[0][0][i]);
1217 rot = new TGeoRotation("", 0.0, 0.0, t);
1218 rotrans = new TGeoCombiTrans("", x0, y0, 0.0, rot);
1219 vM0->AddNode(vTA0, i+1, rotrans);
1221 vM0->AddNode(vA0, 1, 0);
1222 vM0->AddNode(vB0, 1, 0);
1224 rot = new TGeoRotation("", 90., 0., 90., 90., 180., 0.);
1225 vM0->AddNode(vB0,2,rot);
1226 // Find location of tube ends for later use.
1227 for(i=0;i<ksecNCoolingTubeDips;i++) rot->LocalToMaster(
1228 fTubeEndSector[0][0][i],fTubeEndSector[0][1][i]);
1230 t = -TMath::RadToDeg()*TMath::ATan2(
1231 sB0->GetX(0)-sB0->GetX(sB0->GetNvert()-1),
1232 sB0->GetY(0)-sB0->GetY(sB0->GetNvert()-1));
1233 rot = new TGeoRotation("",t,0.0,0.0);// z axis rotation
1234 x0 = 0.5*(sB0->GetX(0)+sB0->GetX(sB0->GetNvert()-1))+
1235 sB3->GetDX()*TMath::Cos(t*TMath::DegToRad());
1236 y0 = 0.5*(sB0->GetY(0)+sB0->GetY(sB0->GetNvert()-1))+
1237 sB3->GetDX()*TMath::Sin(t*TMath::DegToRad());
1238 z0 = sB0->GetZ(0)+sB3->GetDZ();
1239 rotrans = new TGeoCombiTrans("",x0,y0,z0,rot);
1240 vM0->AddNode(vB3,1,rotrans); // Put Mounting bracket on sector
1241 rotrans = new TGeoCombiTrans("",x0,y0,-z0,rot);
1242 vM0->AddNode(vB3,2,rotrans); // Put Mounting bracket on sector
1244 j = 0; // right side, find point with largest x value
1246 for(i=1;i<sB0->GetNvert();i++)if(sB0->GetX(i)>x1) {j=i;x1=sB0->GetX(i);}
1247 j--; // Too big by 1
1248 //t = -TMath::RadToDeg()*TMath::ATan2(
1249 // sB0->GetX(j)-sB0->GetX(j-1),
1250 // sB0->GetY(j)-sB0->GetY(j-1));
1253 rot = new TGeoRotation("",t,0.0,0.0); // z axis rotation
1254 /* // this way gets correct orientation but wrong "height"
1255 x0 = 0.5*(sB0->GetX(j)+sB0->GetX(j-1))+
1256 sB3->GetDX()*TMath::Cos(t*TMath::DegToRad());
1257 y0 = 0.5*(sB0->GetY(j)+sB0->GetY(j-1))+
1258 sB3->GetDX()*TMath::Sin(t*TMath::DegToRad());
1259 z0 = sB0->GetZ(0)+sB3->GetDZ();
1260 */ // I don't understand the need for this factor 3.5.
1261 // posibly the SPD sector as coded isn't symetric which the
1262 // plans would suggest.
1263 x0 = -0.5*(sB0->GetX(0)+sB0->GetX(sB0->GetNvert()-1))-3.5*
1264 sB3->GetDX()*TMath::Cos(t*TMath::DegToRad());
1265 y0 = 0.5*(sB0->GetY(0)+sB0->GetY(sB0->GetNvert()-1))-3.5*
1266 sB3->GetDX()*TMath::Sin(t*TMath::DegToRad());
1267 rotrans = new TGeoCombiTrans("",1.01*x0,y0,z0,rot);
1268 vM0->AddNode(vB3,3,rotrans); // Put Mounting bracket on sector
1269 rotrans = new TGeoCombiTrans("",1.01*x0,y0,-z0,rot);
1270 vM0->AddNode(vB3,4,rotrans); // Put Mounting bracket on sector
1283 } // end if(GetDebug(3))
1285 //______________________________________________________________________
1286 Bool_t AliITSv11GeometrySPD::CFHolePoints(Double_t s,Double_t r1,
1287 Double_t r2,Double_t l,Double_t &x,Double_t &y) const
1290 // Step along arck a distancs ds and compute boundry of
1291 // two holes (radius r1 and r2) a distance l apart (along
1294 // Double_t s fractional Distance along arcs [0-1]
1295 // where 0-> alpha=beta=0, 1-> alpha=90 degrees.
1296 // Double_t r1 radius at center circle
1297 // Double_t r2 radius of displaced circle
1298 // Double_t l Distance displaced circle is displaces (x-axis)
1300 // Double_t x x coordinate along double circle.
1301 // Double_t y y coordinate along double circle.
1303 // logical, kFALSE if an error
1305 Double_t alpha,beta;
1306 Double_t ac,bc,scb,sca,t,alphac,betac; // at intersection of two circles
1309 ac = r1*r1-l*l-r2*r2;
1311 if(bc==0.0) {printf("bc=0 l=%e r2=%e\n",l,r2);return kFALSE;}
1312 betac = TMath::ACos(ac/bc);
1313 alphac = TMath::Sqrt(bc*bc-ac*ac)/(2.*l*r1);
1316 t = r1*0.5*TMath::Pi() - sca + scb;
1319 x = r2*TMath::Cos(beta) + l;
1320 y = r2*TMath::Sin(beta);
1321 //printf("betac=%e scb=%e t=%e s=%e beta=%e x=%e y=%e\n",
1322 // betac,scb,t,s,beta,x,y);
1325 beta = (s*t-scb+sca)/(r1*0.5*TMath::Pi());
1326 alpha = beta*0.5*TMath::Pi();
1327 x = r1*TMath::Cos(alpha);
1328 y = r1*TMath::Sin(alpha);
1329 //printf("alphac=%e sca=%e t=%e s=%e beta=%e alpha=%e x=%e y=%e\n",
1330 // alphac,sca,t,s,beta,alpha,x,y);
1335 //______________________________________________________________________
1336 Bool_t AliITSv11GeometrySPD::GetSectorMountingPoints(Int_t index,Double_t &x0,
1337 Double_t &y0, Double_t &x1, Double_t &y1) const
1340 // Returns the edges of the straight borders in the SPD sector shape,
1341 // which are used to mount staves on them.
1342 // Coordinate system is that of the carbon fiber sector volume.
1344 // Index numbering is as follows:
1350 // Arguments [the ones passed by reference contain output values]:
1351 // Int_t index --> location index according to above scheme [0-5]
1352 // Double_t &x0 --> (by ref) x0 location or the ladder sector [cm]
1353 // Double_t &y0 --> (by ref) y0 location of the ladder sector [cm]
1354 // Double_t &x1 --> (by ref) x1 location or the ladder sector [cm]
1355 // Double_t &y1 --> (by ref) y1 location of the ladder sector [cm]
1356 // TGeoManager *mgr --> The TGeo builder
1358 // The location is described by a line going from (x0, y0) to (x1, y1)
1360 // Returns kTRUE if no problems encountered.
1361 // Returns kFALSE if a problem was encountered (e.g.: shape not found).
1363 Int_t isize = fSPDsectorX0.GetSize();
1365 x0 = x1 = y0 = y1 = 0.0;
1366 if(index < 0 || index > isize) {
1367 AliError(Form("index = %d: allowed 0 --> %", index, isize));
1369 } // end if(index<0||index>isize)
1370 x0 = fSPDsectorX0[index];
1371 x1 = fSPDsectorX1[index];
1372 y0 = fSPDsectorY0[index];
1373 y1 = fSPDsectorY1[index];
1376 //______________________________________________________________________
1377 void AliITSv11GeometrySPD::SPDsectorShape(Int_t n,const Double_t *xc,
1378 const Double_t *yc, const Double_t *r,
1379 const Double_t *ths, const Double_t *the,
1380 Int_t npr, Int_t &m, Double_t **xp, Double_t **yp) const
1383 // Code to compute the points that make up the shape of the SPD
1384 // Carbon fiber support sections
1386 // Int_t n size of arrays xc,yc, and r.
1387 // Double_t *xc array of x values for radii centers.
1388 // Double_t *yc array of y values for radii centers.
1389 // Double_t *r array of signed radii values.
1390 // Double_t *ths array of starting angles [degrees].
1391 // Double_t *the array of ending angles [degrees].
1392 // Int_t npr the number of lines segments to aproximate the arc.
1393 // Outputs (arguments passed by reference):
1394 // Int_t m the number of enetries in the arrays *xp[npr+1]
1396 // Double_t **xp array of x coordinate values of the line segments
1397 // which make up the SPD support sector shape.
1398 // Double_t **yp array of y coordinate values of the line segments
1399 // which make up the SPD support sector shape.
1406 cout <<" X \t Y \t R \t S \t E" << m << endl;
1407 for(i = 0; i < n; i++) {
1408 cout << "{" << xc[i] << ", ";
1409 cout << yc[i] << ", ";
1410 cout << r[i] << ", ";
1411 cout << ths[i] << ", ";
1412 cout << the[i] << "}, " << endl;
1414 } // end if(GetDebug(2))
1415 if (GetDebug(3)) cout << "Double_t sA0 = [" << n*(npr+1)+1<<"][";
1416 if (GetDebug(4)) cout << "3] {";
1417 else if(GetDebug(3)) cout <<"2] {";
1419 for(i = 0; i < n; i++) {
1420 t1 = (the[i] - ths[i]) / t0;
1421 if(GetDebug(5)) cout << "t1 = " << t1 << endl;
1422 for(k = 0; k <= npr; k++) {
1423 t = ths[i] + ((Double_t)k) * t1;
1424 xp[i][k] = TMath::Abs(r[i]) * CosD(t) + xc[i];
1425 yp[i][k] = TMath::Abs(r[i]) * SinD(t) + yc[i];
1427 cout << "{" << xp[i][k] << "," << yp[i][k];
1428 if (GetDebug(4)) cout << "," << t;
1430 } // end if GetDebug
1432 if(GetDebug(3)) cout << endl;
1434 if(GetDebug(3)) cout << "{" << xp[0][0] << ", " << yp[0][0];
1435 if(GetDebug(4)) cout << "," << ths[0];
1436 if(GetDebug(3)) cout << "}}" << endl;
1439 //______________________________________________________________________
1440 TGeoVolume* AliITSv11GeometrySPD::CreateLadder(Int_t layer,TArrayD &sizes,
1441 TGeoManager *mgr) const
1444 // Creates the "ladder" = silicon sensor + 5 chips.
1445 // Returns a TGeoVolume containing the following components:
1446 // - the sensor (TGeoBBox), whose name depends on the layer
1447 // - 5 identical chips (TGeoBBox)
1448 // - a guard ring around the sensor (subtraction of TGeoBBoxes),
1449 // which is separated from the rest of sensor because it is not
1451 // - bump bondings (TGeoBBox stripes for the whole width of the
1452 // sensor, one per column).
1455 // 1 - the owner layer (MUST be 1 or 2 or a fatal error is raised)
1456 // 2 - a TArrayD passed by reference, which will contain relevant
1457 // dimensions related to this object:
1458 // size[0] = 'thickness' (the smallest dimension)
1459 // size[1] = 'length' (the direction along the ALICE Z axis)
1460 // size[2] = 'width' (extension in the direction perp. to the
1462 // 3 - the used TGeoManager
1464 // ** CRITICAL CHECK **
1465 // layer number can be ONLY 1 or 2
1466 if (layer != 1 && layer != 2) AliFatal("Layer number MUST be 1 or 2");
1469 TGeoMedium *medAir = GetMedium("AIR$",mgr);
1470 TGeoMedium *medSPDSiChip = GetMedium("SPD SI CHIP$",mgr); // SPD SI CHIP
1471 TGeoMedium *medSi = GetMedium("SI$",mgr);
1472 TGeoMedium *medBumpBond = GetMedium("COPPER$",mgr); // ??? BumpBond
1475 Double_t chipThickness = fgkmm * 0.150;
1476 Double_t chipWidth = fgkmm * 15.950;
1477 Double_t chipLength = fgkmm * 13.600;
1478 Double_t chipSpacing = fgkmm * 0.400; // separation of chips along Z
1479 Double_t sensThickness = fgkmm * 0.200;
1480 Double_t sensLength = fgkmm * 69.600;
1481 Double_t sensWidth = fgkmm * 12.800;
1482 Double_t guardRingWidth = fgkmm * 0.560; // a border of this thickness
1483 // all around the sensor
1484 Double_t bbLength = fgkmm * 0.042;
1485 Double_t bbWidth = sensWidth;
1486 Double_t bbThickness = fgkmm * 0.012;
1487 Double_t bbPos = 0.080; // Z position w.r. to left pixel edge
1488 // compute the size of the container volume which
1489 // will also be returned in the referenced TArrayD;
1490 // for readability, they are linked by reference to a more meaningful name
1492 Double_t &thickness = sizes[0];
1493 Double_t &length = sizes[1];
1494 Double_t &width = sizes[2];
1495 // the container is a box which exactly enclose all the stuff;
1497 length = sensLength + 2.0*guardRingWidth;
1498 thickness = sensThickness + chipThickness + bbThickness;
1501 // While creating this volume, since it is a sensitive volume,
1502 // we must respect some standard criteria for its local reference frame.
1503 // Local X must correspond to x coordinate of the sensitive volume:
1504 // this means that we are going to create the container with a local
1505 // reference system that is **not** in the middle of the box.
1506 // This is accomplished by calling the shape constructor with an
1507 // additional option ('originShift'):
1508 Double_t xSens = 0.5 * (width - sensWidth - 2.0*guardRingWidth);
1509 Double_t originShift[3] = {-xSens, 0., 0.};
1510 TGeoBBox *shapeContainer = new TGeoBBox(0.5*width,0.5*thickness,
1511 0.5*length,originShift);
1512 // then the volume is made of air, and using this shape
1513 TGeoVolume *container = new TGeoVolume(Form("ITSSPDlay%d-Ladder",layer),
1514 shapeContainer, medAir);
1515 // the chip is a common box
1516 TGeoVolume *volChip = mgr->MakeBox("ITSSPDchip",medSPDSiChip,
1517 0.5*chipWidth,0.5*chipThickness,0.5*chipLength);
1518 // the sensor as well
1519 TGeoVolume *volSens = mgr->MakeBox(GetSenstiveVolumeName(layer),medSi,
1520 0.5*sensWidth,0.5*sensThickness,0.5*sensLength);
1521 // the guard ring shape is the subtraction of two boxes with the
1523 TGeoBBox *shIn = new TGeoBBox(0.5*sensWidth,sensThickness,0.5*sensLength);
1524 TGeoBBox *shOut = new TGeoBBox(0.5*sensWidth+guardRingWidth,
1525 0.5*sensThickness,0.5*sensLength+guardRingWidth);
1526 shIn->SetName("ITSSPDinnerBox");
1527 shOut->SetName("ITSSPDouterBox");
1528 TGeoCompositeShape *shBorder = new TGeoCompositeShape(
1529 "ITSSPDgaurdRingBorder",Form("%s-%s",shOut->GetName(),shIn->GetName()));
1530 TGeoVolume *volBorder = new TGeoVolume("ITSSPDgaurdRing",shBorder,medSi);
1531 // bump bonds for one whole column
1532 TGeoVolume *volBB = mgr->MakeBox("ITSSPDbb",medBumpBond,0.5*bbWidth,
1533 0.5*bbThickness,0.5*bbLength);
1534 // set colors of all objects for visualization
1535 volSens->SetLineColor(kYellow + 1);
1536 volChip->SetLineColor(kGreen);
1537 volBorder->SetLineColor(kYellow + 3);
1538 volBB->SetLineColor(kGray);
1541 // sensor is translated along thickness (X) and width (Y)
1542 Double_t ySens = 0.5 * (thickness - sensThickness);
1543 Double_t zSens = 0.0;
1544 // we want that the x of the ladder is the same as the one of
1545 // its sensitive volume
1546 TGeoTranslation *trSens = new TGeoTranslation(0.0, ySens, zSens);
1547 // bump bonds are translated along all axes:
1548 // keep same Y used for sensors, but change the Z
1549 TGeoTranslation *trBB[160];
1551 Double_t y = 0.5 * (thickness - bbThickness) - sensThickness;
1552 Double_t z = -0.5 * sensLength + guardRingWidth + fgkmm*0.425 - bbPos;
1554 for (i = 0; i < 160; i++) {
1555 trBB[i] = new TGeoTranslation(x, y, z);
1557 case 31:case 63:case 95:case 127:
1558 z += fgkmm * 0.625 + fgkmm * 0.2;
1564 // the chips are translated along the length (Z) and thickness (X)
1565 TGeoTranslation *trChip[5] = {0, 0, 0, 0, 0};
1567 y = 0.5 * (chipThickness - thickness);
1569 for (i = 0; i < 5; i++) {
1570 z = -0.5*length + guardRingWidth
1571 + (Double_t)i*chipSpacing + ((Double_t)(i) + 0.5)*chipLength;
1572 trChip[i] = new TGeoTranslation(x, y, z);
1575 // add nodes to container
1576 container->AddNode(volSens, 1, trSens);
1577 container->AddNode(volBorder, 1, trSens);
1578 for (i = 0; i < 160; i++) container->AddNode(volBB,i+1,trBB[i]);
1579 for (i = 0; i < 5; i++) container->AddNode(volChip,i+3,trChip[i]);
1580 // return the container
1585 //______________________________________________________________________
1586 TGeoVolume* AliITSv11GeometrySPD::CreateLadder
1587 (Int_t layer, TArrayD &sizes, TGeoManager *mgr) const
1590 // Creates the "ladder" = silicon sensor + 5 chips.
1591 // Returns a TGeoVolume containing the following components:
1592 // - the sensor (TGeoBBox), whose name depends on the layer
1593 // - 5 identical chips (TGeoBBox)
1594 // - a guard ring around the sensor (subtraction of TGeoBBoxes),
1595 // which is separated from the rest of sensor because it is not
1597 // - bump bondings (TGeoBBox stripes for the whole width of the
1598 // sensor, one per column).
1601 // 1 - the owner layer (MUST be 1 or 2 or a fatal error is raised)
1602 // 2 - a TArrayD passed by reference, which will contain relevant
1603 // dimensions related to this object:
1604 // size[0] = 'thickness' (the smallest dimension)
1605 // size[1] = 'length' (the direction along the ALICE Z axis)
1606 // size[2] = 'width' (extension in the direction perp. to the
1608 // 3 - the used TGeoManager
1610 // ** CRITICAL CHECK ******************************************************
1611 // layer number can be ONLY 1 or 2
1612 if (layer != 1 && layer != 2) AliFatal("Layer number MUST be 1 or 2");
1614 // ** MEDIA ***************************************************************
1616 TGeoMedium *medAir = GetMedium("AIR$",mgr);
1617 TGeoMedium *medSPDSiChip = GetMedium("SPD SI CHIP$",mgr); // SPD SI CHIP
1618 TGeoMedium *medSi = GetMedium("SI$",mgr);
1619 TGeoMedium *medBumpBond = GetMedium("COPPER$",mgr); // ??? BumpBond
1621 // ** SIZES ***************************************************************
1623 Double_t chipThickness = fgkmm * 0.150;
1624 Double_t chipWidth = fgkmm * 15.950;
1625 Double_t chipLength = fgkmm * 13.600;
1626 Double_t chipSpacing = fgkmm * 0.400; // separation of chips along Z
1627 Double_t sensThickness = fgkmm * 0.200;
1628 Double_t sensLength = fgkmm * 69.600;
1629 Double_t sensWidth = fgkmm * 12.800;
1630 Double_t guardRingWidth = fgkmm * 0.560; // guard ring around sensor
1631 Double_t bbLength = fgkmm * 0.042;
1632 Double_t bbWidth = sensWidth;
1633 Double_t bbThickness = fgkmm * 0.012;
1634 Double_t bbPos = 0.080; // Z position w.r. to left pixel edge
1636 // the three dimensions of the box which contains the ladder
1637 // are returned in the 'sizes' argument, and are used for volumes positionement
1638 // for readability purpose, they are linked by reference to a more meaningful name
1640 Double_t &thickness = sizes[0];
1641 Double_t &length = sizes[1];
1642 Double_t &width = sizes[2];
1643 // the container is a box which exactly enclose all the stuff
1645 length = sensLength + 2.0*guardRingWidth;
1646 thickness = sensThickness + chipThickness + bbThickness;
1648 // ** VOLUMES *************************************************************
1650 // This is a sensitive volume.
1651 // Local X must correspond to x coordinate of the sensitive volume:
1652 // to respect this, the origin of the local reference system
1653 // must be shifted from the middle of the box, using
1654 // an additional option ('originShift') when creating the container shape:
1655 Double_t xSens = 0.5 * (width - sensWidth - 2.0*guardRingWidth);
1656 Double_t originShift[3] = {-xSens, 0., 0.};
1658 // now the container is a TGeoBBox with this shift,
1659 // and the volume is made of air (it does not exist in reality)
1660 TGeoBBox *shLadder = new TGeoBBox(0.5*width, 0.5*thickness, 0.5*length, originShift);
1661 TGeoVolume *vLadder = new TGeoVolume(Form("ITSSPDlay%d-Ladder", layer), shLadder, medAir);
1663 // the chip is a common box
1664 TGeoVolume *vChip = mgr->MakeBox("ITSSPDchip", medSPDSiChip,
1665 0.5*chipWidth, 0.5*chipThickness, 0.5*chipLength);
1667 // to build the sensor with its guard ring, we create a TGeoBBox with the size
1668 // of the sensor + guard ring, and we insert the true sensor into it as an
1669 // internal node: this simplifies the implementation with the same result
1670 TGeoVolume *vSensGuard = mgr->MakeBox(Form("%s-guardRing", GetSenstiveVolumeName(layer)),
1672 0.5*sensWidth + guardRingWidth,
1674 0.5*sensLength + guardRingWidth);
1675 TGeoVolume *vSens = mgr->MakeBox(GetSenstiveVolumeName(layer), medSi,
1676 0.5*sensWidth,0.5*sensThickness,0.5*sensLength);
1677 vSensGuard->AddNode(vSens, 0);
1678 vSensGuard->SetTransparency(50);
1680 // bump bond is a common box for one whole column
1681 TGeoVolume *vBB = mgr->MakeBox("ITSSPDbb", medBumpBond,
1682 0.5*bbWidth, 0.5*bbThickness, 0.5*bbLength);
1684 // set colors of all objects for visualization
1685 vLadder->SetLineColor(kRed);
1686 vSens->SetLineColor(kYellow + 1);
1687 vChip->SetLineColor(kGreen);
1688 vSensGuard->SetLineColor(kYellow + 3);
1689 vBB->SetLineColor(kGray);
1692 // sensor is translated along thickness (Y) and width (X)
1693 Double_t ySens = 0.5 * (thickness - sensThickness);
1694 Double_t zSens = 0.0;
1695 // we want that the x of the ladder is the same as the one of
1696 // its sensitive volume
1697 TGeoTranslation *trSens = new TGeoTranslation(0.0, ySens, zSens);
1698 // bump bonds are translated along all axes:
1699 // keep same Y used for sensors, but change the Z
1700 TGeoTranslation *trBB[160];
1702 Double_t y = 0.5 * (thickness - bbThickness) - sensThickness;
1703 Double_t z = -0.5 * sensLength + guardRingWidth + fgkmm*0.425 - bbPos;
1705 for (i = 0; i < 160; i++) {
1706 trBB[i] = new TGeoTranslation(x, y, z);
1708 case 31:case 63:case 95:case 127:
1709 z += fgkmm * 0.625 + fgkmm * 0.2;
1715 // the chips are translated along the length (Z) and thickness (X)
1716 TGeoTranslation *trChip[5] = {0, 0, 0, 0, 0};
1718 y = 0.5 * (chipThickness - thickness);
1720 for (i = 0; i < 5; i++) {
1721 z = -0.5*length + guardRingWidth
1722 + (Double_t)i*chipSpacing + ((Double_t)(i) + 0.5)*chipLength;
1723 trChip[i] = new TGeoTranslation(x, y, z);
1726 // add nodes to container
1727 vLadder->AddNode(vSensGuard, 1, trSens);
1728 //vLadderAddNode(volBorder, 1, trSens);
1729 for (i = 0; i < 160; i++) vLadder->AddNode(vBB,i+1,trBB[i]);
1730 for (i = 0; i < 5; i++) vLadder->AddNode(vChip,i+3,trChip[i]);
1731 // return the container
1736 //______________________________________________________________________
1737 TGeoVolume* AliITSv11GeometrySPD::CreateClip(TArrayD &sizes,Bool_t isDummy,
1738 TGeoManager *mgr) const
1741 // Creates the carbon fiber clips which are added to the central ladders.
1742 // They have a complicated shape which is approximated by a TGeoXtru
1743 // Implementation of a single clip over an half-stave.
1744 // It has a complicated shape which is approximated to a section like this:
1749 // / 1\\___________________4
1750 // 0 \___________________
1752 // with a finite thickness for all the shape
1753 // Its local reference frame is such that point A corresponds to origin.
1755 Double_t fullLength = fgkmm * 12.6; // = x4 - x0
1756 Double_t flatLength = fgkmm * 5.4; // = x4 - x3
1757 Double_t inclLongLength = fgkmm * 5.0; // = 5-6
1758 Double_t inclShortLength = fgkmm * 2.0; // = 6-7
1759 Double_t fullHeight = fgkmm * 2.8; // = y6 - y3
1760 Double_t thickness = fgkmm * 0.18; // thickness
1761 Double_t totalLength = fgkmm * 52.0; // total length in Z
1762 Double_t holeSize = fgkmm * 5.0; // dimension of cubic
1763 // hole inserted for pt1000
1764 Double_t angle1 = 27.0; // supplementary of angle DCB
1765 Double_t angle2; // angle DCB
1766 Double_t angle3; // angle of GH with vertical
1768 angle2 = 0.5 * (180.0 - angle1);
1769 angle3 = 90.0 - TMath::ACos(fullLength - flatLength -
1770 inclLongLength*TMath::Cos(angle1)) *
1772 angle1 *= TMath::DegToRad();
1773 angle2 *= TMath::DegToRad();
1774 angle3 *= TMath::DegToRad();
1776 Double_t x[8], y[8];
1779 x[1] = x[0] + fullLength - flatLength - inclLongLength*TMath::Cos(angle1);
1780 x[2] = x[0] + fullLength - flatLength;
1781 x[3] = x[0] + fullLength;
1783 x[5] = x[4] - flatLength + thickness * TMath::Cos(angle2);
1788 y[1] = y[0] + inclShortLength * TMath::Cos(angle3);
1789 y[2] = y[1] - inclLongLength * TMath::Sin(angle1);
1791 y[4] = y[3] + thickness;
1793 y[6] = y[1] + thickness;
1794 y[7] = y[0] + thickness;
1797 sizes[0] = totalLength;
1798 sizes[1] = fullHeight;
1805 if(isDummy){// use this argument when on ewant just the
1806 // positions without create any volume
1810 TGeoXtru *shClip = new TGeoXtru(2);
1811 shClip->SetName("ITSSPDshclip");
1812 shClip->DefinePolygon(8, x, y);
1813 shClip->DefineSection(0, -0.5*totalLength, 0., 0., 1.0);
1814 shClip->DefineSection(1, 0.5*totalLength, 0., 0., 1.0);
1816 TGeoBBox *shHole = new TGeoBBox("ITSSPDSHClipHole",0.5*holeSize,
1817 0.5*holeSize,0.5*holeSize);
1818 TGeoTranslation *tr1 = new TGeoTranslation("ITSSPDTRClipHole1",x[2],0.0,
1820 TGeoTranslation *tr2 = new TGeoTranslation("ITSSPDTRClipHole2",x[2],0.0,
1822 TGeoTranslation *tr3 = new TGeoTranslation("ITSSPDTRClipHole3",x[2],0.0,
1824 tr1->RegisterYourself();
1825 tr2->RegisterYourself();
1826 tr3->RegisterYourself();
1828 //TString strExpr("ITSSPDshclip-(");
1829 TString strExpr(shClip->GetName());
1830 strExpr.Append("-(");
1831 strExpr.Append(Form("%s:%s+", shHole->GetName(), tr1->GetName()));
1832 strExpr.Append(Form("%s:%s+", shHole->GetName(), tr2->GetName()));
1833 strExpr.Append(Form("%s:%s)", shHole->GetName(), tr3->GetName()));
1834 TGeoCompositeShape *shClipHole = new TGeoCompositeShape(
1835 "ITSSPDSHClipHoles",strExpr.Data());
1837 TGeoMedium *mat = GetMedium("SPD C (M55J)$", mgr);
1838 TGeoVolume *vClip = new TGeoVolume("ITSSPDclip", shClipHole, mat);
1839 vClip->SetLineColor(kGray + 2);
1841 }//______________________________________________________________________
1842 TGeoCompositeShape* AliITSv11GeometrySPD::CreateGroundingFoilShape
1843 (Int_t itype,Double_t &length,Double_t &width,
1844 Double_t thickness,TArrayD &sizes)
1847 // Creates the typical composite shape of the grounding foil:
1849 // +---------------------------------------------------------+
1851 // | +-----------+ +------------+ 10
1853 // | 3 /-----+ 4 +------+
1860 // This shape is used 4 times: two layers of glue, one in kapton
1861 // and one in aluminum, taking into account that the aliminum
1862 // layer has small differences in the size of some parts.
1864 // In order to overcome problems apparently due to a large number
1865 // of points, the shape creation is done according the following
1867 // 1) a TGeoBBox is created with a size right enough to contain
1868 // the whole shape (0-1-X-13)
1869 // 2) holes are defined as other TGeoBBox which are subtracted
1870 // from the main shape
1871 // 3) a TGeoXtru is defined connecting the points (0-->11-->0)
1872 // and is also subtracted from the main shape
1874 // The argument ("type") is used to choose between all these
1876 // - type = 0 --> kapton layer
1877 // - type = 1 --> aluminum layer
1878 // - type = 2 --> glue layer between support and GF
1879 // - type = 3 --> glue layer between GF and ladders
1880 // Returns: a TGeoCompositeShape which will then be used to shape
1881 // several volumes. Since TGeoXtru is used, the local reference
1882 // frame of this object has X horizontal and Y vertical w.r to
1883 // the shape drawn above, and Z axis going perpendicularly to the screen.
1884 // This is not the correct reference for the half stave, for which
1885 // the "long" dimension is Z and the "short" is X, while Y goes in
1886 // the direction of thickness. This will imply some rotations when
1887 // using the volumes created with this shape.
1889 // suffix to differentiate names
1892 // size of the virtual box containing exactly this volume
1893 length = fgkmm * 243.18;
1894 width = fgkmm * 15.95;
1896 length -= fgkmm * 0.4;
1897 width -= fgkmm * 0.4;
1898 } // end if itype==1
1901 sprintf(type,"Kap");
1904 sprintf(type,"Alu");
1907 sprintf(type,"Glue1");
1910 sprintf(type,"Glue2");
1913 // we divide the shape in several slices along the horizontal
1914 // direction (local X) here we define define the length of all
1915 // sectors (from leftmost to rightmost)
1917 Double_t sliceLength[] = { 140.71, 2.48, 26.78, 4.00,
1918 10.00, 24.40, 10.00, 24.81 };
1919 for (i = 0; i < 8; i++) sliceLength[i] *= fgkmm;
1921 sliceLength[0] -= fgkmm * 0.2;
1922 sliceLength[4] -= fgkmm * 0.2;
1923 sliceLength[5] += fgkmm * 0.4;
1924 sliceLength[6] -= fgkmm * 0.4;
1925 } // end if itype ==1
1927 // as shown in the drawing, we have four different widths
1928 // (along local Y) in this shape:
1929 Double_t widthMax = fgkmm * 15.95;
1930 Double_t widthMed1 = fgkmm * 15.00;
1931 Double_t widthMed2 = fgkmm * 11.00;
1932 Double_t widthMin = fgkmm * 4.40;
1934 widthMax -= fgkmm * 0.4;
1935 widthMed1 -= fgkmm * 0.4;
1936 widthMed2 -= fgkmm * 0.4;
1937 widthMin -= fgkmm * 0.4;
1938 } // end if itype==1
1940 // create the main shape
1941 TGeoBBox *shGroundFull = 0;
1942 shGroundFull = new TGeoBBox(Form("ITSSPDSHgFoil%sFull", type),
1943 0.5*length,0.5*width, 0.5*thickness);
1945 // create the polygonal shape to be subtracted to give the correct
1946 // shape to the borders its vertices are defined in sugh a way that
1947 // this polygonal will be placed in the correct place considered
1948 // that the origin of the local reference frame is in the center
1949 // of the main box: we fix the starting point at the lower-left
1950 // edge of the shape (point 12), and add all points in order,
1951 // following a clockwise rotation
1953 Double_t x[13], y[13];
1954 x[ 0] = -0.5 * length + sliceLength[0];
1955 y[ 0] = -0.5 * widthMax;
1957 x[ 1] = x[0] + sliceLength[1];
1958 y[ 1] = y[0] + (widthMax - widthMed1);
1960 x[ 2] = x[1] + sliceLength[2];
1963 x[ 3] = x[2] + sliceLength[3];
1964 y[ 3] = y[2] + (widthMed1 - widthMed2);
1966 x[ 4] = x[3] + sliceLength[4];
1970 y[ 5] = y[4] + (widthMed2 - widthMin);
1972 x[ 6] = x[5] + sliceLength[5];
1978 x[ 8] = x[7] + sliceLength[6];
1984 x[10] = x[9] + sliceLength[7] + 0.5;
1994 TGeoXtru *shGroundXtru = new TGeoXtru(2);
1995 shGroundXtru->SetName(Form("ITSSPDSHgFoil%sXtru", type));
1996 shGroundXtru->DefinePolygon(13, x, y);
1997 shGroundXtru->DefineSection(0, -thickness, 0., 0., 1.0);
1998 shGroundXtru->DefineSection(1, thickness, 0., 0., 1.0);
2000 // define a string which will express the algebric operations among volumes
2001 // and add the subtraction of this shape from the main one
2002 TString strComposite(Form("ITSSPDSHgFoil%sFull-(%s+", type,
2003 shGroundXtru->GetName()));
2005 // define the holes according to size information coming from drawings:
2006 Double_t holeLength = fgkmm * 10.00;
2007 Double_t holeWidth = fgkmm * 7.50;
2008 Double_t holeSepX0 = fgkmm * 7.05; // separation between center
2009 // of first hole and left border
2010 Double_t holeSepXC = fgkmm * 14.00; // separation between the centers
2011 // of two consecutive holes
2012 Double_t holeSepX1 = fgkmm * 15.42; // separation between centers of
2014 Double_t holeSepX2 = fgkmm * 22.00; // separation between centers of
2015 // 10th and 11th hole
2017 holeSepX0 -= fgkmm * 0.2;
2018 holeLength += fgkmm * 0.4;
2019 holeWidth += fgkmm * 0.4;
2020 } // end if itype==1
2022 sizes[0] = holeLength;
2023 sizes[1] = holeWidth;
2024 sizes[2] = holeSepX0;
2025 sizes[3] = holeSepXC;
2026 sizes[4] = holeSepX1;
2027 sizes[5] = holeSepX2;
2028 sizes[6] = fgkmm * 4.40;
2030 // X position of hole center (will change for each hole)
2031 Double_t holeX = -0.5*length;
2032 // Y position of center of all holes (= 4.4 mm from upper border)
2033 Double_t holeY = 0.5*(width - holeWidth) - widthMin;
2035 // create a shape for the holes (common)
2036 TGeoBBox *shHole = 0;
2037 shHole = new TGeoBBox(Form("ITSSPD%sGfoilHole", type),0.5*holeLength,
2038 0.5*holeWidth, thickness);
2040 // insert the holes in the XTRU shape:
2041 // starting from the first value of X, they are simply
2042 // shifted along this axis
2044 TGeoTranslation *transHole[11];
2045 for (i = 0; i < 11; i++) {
2046 // set the position of the hole, depending on index
2057 } // end if else if's
2058 //cout << i << " --> X = " << holeX << endl;
2059 sprintf(name,"ITSSPDTRgFoil%sHole%d", type, i);
2060 transHole[i] = new TGeoTranslation(name, holeX, holeY, 0.0);
2061 transHole[i]->RegisterYourself();
2062 strComposite.Append(Form("ITSSPD%sGfoilHole:%s", type, name));
2063 if (i < 10) strComposite.Append("+"); else strComposite.Append(")");
2066 // create composite shape
2067 TGeoCompositeShape *shGround = new TGeoCompositeShape(
2068 Form("ITSSPDSHgFoil%s", type), strComposite.Data());
2072 //______________________________________________________________________
2073 TGeoVolume* AliITSv11GeometrySPD::CreateGroundingFoil(Bool_t isRight,
2074 TArrayD &sizes, TGeoManager *mgr)
2077 // Create a volume containing all parts of the grounding foil a
2078 // for a half-stave.
2079 // It consists of 4 layers with the same shape but different thickness:
2080 // 1) a layer of glue
2081 // 2) the aluminum layer
2082 // 3) the kapton layer
2083 // 4) another layer of glue
2086 // 1: a boolean value to know if it is the grounding foir for
2087 // the right or left side
2088 // 2: a TArrayD which will contain the dimension of the container box:
2089 // - size[0] = length along Z (the beam line direction)
2090 // - size[1] = the 'width' of the stave, which defines, together
2091 // with Z, the plane of the carbon fiber support
2092 // - size[2] = 'thickness' (= the direction along which all
2093 // stave components are superimposed)
2094 // 3: the TGeoManager
2096 // The return value is a TGeoBBox volume containing all grounding
2098 // to avoid strange behaviour of the geometry manager,
2099 // create a suffix to be used in the names of all shapes
2102 if (isRight) strcpy(suf, "R"); else strcpy(suf, "L");
2103 // this volume will be created in order to ease its placement in
2104 // the half-stave; then, it is added here the small distance of
2105 // the "central" edge of each volume from the Z=0 plane in the stave
2106 // reference (which coincides with ALICE one)
2107 Double_t dist = fgkmm * 0.71;
2110 TGeoMedium *medKap = GetMedium("SPD KAPTON(POLYCH2)$", mgr);
2111 TGeoMedium *medAlu = GetMedium("AL$", mgr);
2112 TGeoMedium *medGlue = GetMedium("EPOXY$", mgr); //??? GLUE_GF_SUPPORT
2114 // compute the volume shapes (thicknesses change from one to the other)
2115 Double_t kpLength, kpWidth, alLength, alWidth;
2116 TArrayD kpSize, alSize, glSize;
2117 Double_t kpThickness = fgkmm * 0.04;
2118 Double_t alThickness = fgkmm * 0.01;
2119 //cout << "AL THICKNESS" << alThickness << endl;
2120 //Double_t g0Thickness = fgkmm * 0.1175 - fgkGapHalfStave;
2121 //Double_t g1Thickness = fgkmm * 0.1175 - fgkGapLadder;
2122 Double_t g0Thickness = fgkmm * 0.1275 - fgkGapHalfStave;
2123 Double_t g1Thickness = fgkmm * 0.1275 - fgkGapLadder;
2124 TGeoCompositeShape *kpShape = CreateGroundingFoilShape(0,kpLength,kpWidth,
2125 kpThickness, kpSize);
2126 TGeoCompositeShape *alShape = CreateGroundingFoilShape(1,alLength,alWidth,
2127 alThickness, alSize);
2128 TGeoCompositeShape *g0Shape = CreateGroundingFoilShape(2,kpLength,kpWidth,
2129 g0Thickness, glSize);
2130 TGeoCompositeShape *g1Shape = CreateGroundingFoilShape(3,kpLength,kpWidth,
2131 g1Thickness, glSize);
2132 // create the component volumes and register their sizes in the
2133 // passed arrays for readability reasons, some reference variables
2134 // explicit the meaning of the array slots
2135 TGeoVolume *kpVol = new TGeoVolume(Form("ITSSPDgFoilKap%s",suf),
2137 TGeoVolume *alVol = new TGeoVolume(Form("ITSSPDgFoilAlu%s",suf),
2139 TGeoVolume *g0Vol = new TGeoVolume(Form("ITSSPDgFoilGlue%s",suf),
2141 TGeoVolume *g1Vol = new TGeoVolume(Form("ITSSPDgFoilGlue%s",suf),
2143 // set colors for the volumes
2144 kpVol->SetLineColor(kRed);
2145 alVol->SetLineColor(kGray);
2146 g0Vol->SetLineColor(kYellow);
2147 g1Vol->SetLineColor(kYellow);
2148 // create references for the final size object
2149 if (sizes.GetSize() != 3) sizes.Set(3);
2150 Double_t &fullThickness = sizes[0];
2151 Double_t &fullLength = sizes[1];
2152 Double_t &fullWidth = sizes[2];
2153 // kapton leads the larger dimensions of the foil
2154 // (including the cited small distance from Z=0 stave reference plane)
2155 // the thickness is the sum of the ones of all components
2156 fullLength = kpLength + dist;
2157 fullWidth = kpWidth;
2158 fullThickness = kpThickness + alThickness + g0Thickness + g1Thickness;
2159 // create the container
2160 TGeoMedium *air = GetMedium("AIR$", mgr);
2161 TGeoVolume *container = mgr->MakeBox(Form("ITSSPDgFOIL-%s",suf),
2162 air, 0.5*fullThickness, 0.5*fullWidth, 0.5*fullLength);
2163 // create the common correction rotation (which depends of what side
2165 TGeoRotation *rotCorr = new TGeoRotation(*gGeoIdentity);
2166 if (isRight) rotCorr->RotateY(90.0);
2167 else rotCorr->RotateY(-90.0);
2168 // compute the translations, which are in the length and
2169 // thickness directions
2170 Double_t x, y, z, shift = 0.0;
2171 if (isRight) shift = dist;
2173 x = -0.5*(fullThickness - g0Thickness);
2174 z = 0.5*(fullLength - kpLength) - shift;
2175 TGeoCombiTrans *glTrans0 = new TGeoCombiTrans(x, 0.0, z, rotCorr);
2177 x += 0.5*(g0Thickness + kpThickness);
2178 TGeoCombiTrans *kpTrans = new TGeoCombiTrans(x, 0.0, z, rotCorr);
2180 x += 0.5*(kpThickness + alThickness);
2181 z = 0.5*(fullLength - alLength) - shift - 0.5*(kpLength - alLength);
2182 TGeoCombiTrans *alTrans = new TGeoCombiTrans(x, 0.0, z, rotCorr);
2184 x += 0.5*(alThickness + g1Thickness);
2185 z = 0.5*(fullLength - kpLength) - shift;
2186 TGeoCombiTrans *glTrans1 = new TGeoCombiTrans(x, 0.0, z, rotCorr);
2188 //cout << fgkGapHalfStave << endl;
2189 //cout << g0Thickness << endl;
2190 //cout << kpThickness << endl;
2191 //cout << alThickness << endl;
2192 //cout << g1Thickness << endl;
2195 container->SetLineColor(kMagenta-10);
2196 container->AddNode(kpVol, 1, kpTrans);
2197 container->AddNode(alVol, 1, alTrans);
2198 container->AddNode(g0Vol, 1, glTrans0);
2199 container->AddNode(g1Vol, 2, glTrans1);
2200 // to add the grease we remember the sizes of the holes, stored as
2201 // additional parameters in the kapton layer size:
2202 // - sizes[3] = hole length
2203 // - sizes[4] = hole width
2204 // - sizes[5] = position of first hole center
2205 // - sizes[6] = standard separation between holes
2206 // - sizes[7] = separation between 5th and 6th hole
2207 // - sizes[8] = separation between 10th and 11th hole
2208 // - sizes[9] = separation between the upper hole border and
2210 Double_t holeLength = kpSize[0];
2211 Double_t holeWidth = kpSize[1];
2212 Double_t holeFirstZ = kpSize[2];
2213 Double_t holeSepZ = kpSize[3];
2214 Double_t holeSep5th6th = kpSize[4];
2215 Double_t holeSep10th11th = kpSize[5];
2216 Double_t holeSepY = kpSize[6];
2218 // Grease has not been defined to date. Need much more information
2219 // no this material!
2220 TGeoMedium *grease = GetMedium("SPD KAPTON(POLYCH2)$", mgr); // ??? GREASE
2221 TGeoVolume *hVol = mgr->MakeBox("ITSSPDGrease", grease,
2222 0.5*fullThickness, 0.5*holeWidth, 0.5*holeLength);
2223 hVol->SetLineColor(kBlue);
2224 // displacement of volumes in the container
2225 Int_t idx = 1; // copy numbers start from 1.
2227 y = 0.5*(fullWidth - holeWidth) - holeSepY;
2228 if (isRight) z = holeFirstZ - 0.5*fullLength + dist;
2229 else z = 0.5*fullLength - holeFirstZ - dist;
2230 for (Int_t i = 0; i < 11; i++) {
2231 TGeoTranslation *t = 0;
2232 t = new TGeoTranslation(x, y, -z);
2233 container->AddNode(hVol, idx++, t);
2234 if (i < 4) shift = holeSepZ;
2235 else if (i == 4) shift = holeSep5th6th;
2236 else if (i < 9) shift = holeSepZ;
2237 else shift = holeSep10th11th;
2238 if (isRight) z += shift;
2243 //___________________________________________________________________
2244 TGeoVolumeAssembly* AliITSv11GeometrySPD::CreateMCM(Bool_t isRight,
2245 TArrayD &sizes, TGeoManager *mgr) const
2248 // Create a TGeoAssembly containing all the components of the MCM.
2249 // The TGeoVolume container is rejected due to the possibility of overlaps
2250 // when placing this object on the carbon fiber sector.
2251 // The assembly contains:
2252 // - the thin part of the MCM (integrated circuit)
2253 // - the MCM chips (specifications from EDMS)
2254 // - the cap which covers the zone where chips are bound to MCM
2256 // The local reference frame of this assembly is defined in such a way
2257 // that all volumes are contained in a virtual box whose center
2258 // is placed exactly in the middle of the occupied space w.r to all
2259 // directions. This will ease the positioning of this object in the
2260 // half-stave. The sizes of this virtual box are stored in
2261 // the array passed by reference.
2264 // - a boolean flag to know if this is the "left" or "right" MCM, when
2265 // looking at the stave from above (i.e. the direction from which
2266 // one sees bus over ladders over grounding foil) and keeping the
2267 // continuous border in the upper part, one sees the thicker part
2268 // on the left or right.
2269 // - an array passed by reference which will contain the size of
2270 // the virtual container.
2271 // - a pointer to the used TGeoManager.
2274 // to distinguish the "left" and "right" objects, a suffix is created
2276 if (isRight) strcpy(suf, "R"); else strcpy(suf, "L");
2279 TGeoMedium *medBase = GetMedium("SPD KAPTON(POLYCH2)$",mgr);// ??? MCM BASE
2280 TGeoMedium *medChip = GetMedium("SPD SI CHIP$",mgr);
2281 TGeoMedium *medCap = GetMedium("AL$",mgr);
2283 // The shape of the MCM is divided into 3 sectors with different
2284 // widths (Y) and lengths (X), like in this sketch:
2287 // +---------------------+-----------------------------------+
2289 // | 6 sect 1 /-------------------+
2290 // | sect 0 /--------------/ 3
2291 // +--------------------/ 5
2294 // the inclination of all oblique borders (6-7, 4-5) is always 45 degrees.
2295 // From drawings we can parametrize the dimensions of all these sectors,
2296 // then the shape of this part of the MCM is implemented as a
2297 // TGeoXtru centerd in the virtual XY space.
2298 // The first step is definig the relevant sizes of this shape:
2300 Double_t mcmThickness = fgkmm * 0.35;
2301 Double_t sizeXtot = fgkmm * 105.6; // total distance (0-2)
2302 // resp. 7-8, 5-6 and 3-4
2303 Double_t sizeXsector[3] = {fgkmm * 28.4, fgkmm * 41.4, fgkmm * 28.8};
2304 // resp. 0-8, 1-6 and 2-3
2305 Double_t sizeYsector[3] = {fgkmm * 15.0, fgkmm * 11.0, fgkmm * 8.0};
2306 Double_t sizeSep01 = fgkmm * 4.0; // x(6)-x(7)
2307 Double_t sizeSep12 = fgkmm * 3.0; // x(4)-x(5)
2309 // define sizes of chips (last is the thickest)
2310 Double_t chipLength[5] = { 4.00, 6.15, 3.85, 5.60, 18.00 };
2311 Double_t chipWidth[5] = { 3.00, 4.10, 3.85, 5.60, 5.45 };
2312 Double_t chipThickness[5] = { 0.60, 0.30, 0.30, 1.00, 1.20 };
2314 name[0] = "ITSSPDanalog";
2315 name[1] = "ITSSPDpilot";
2316 name[2] = "ITSSPDgol";
2317 name[3] = "ITSSPDrx40";
2318 name[4] = "ITSSPDoptical";
2319 Color_t color[5] = { kCyan, kGreen, kYellow, kBlue, kOrange };
2321 // define the sizes of the cover
2322 Double_t capThickness = fgkmm * 0.3;
2323 Double_t capHeight = fgkmm * 1.7;
2325 // compute the total size of the virtual container box
2327 Double_t &thickness = sizes[0];
2328 Double_t &length = sizes[1];
2329 Double_t &width = sizes[2];
2331 width = sizeYsector[0];
2332 thickness = mcmThickness + capHeight;
2334 // define all the relevant vertices of the polygon
2335 // which defines the transverse shape of the MCM.
2336 // These values are used to several purposes, and
2337 // for each one, some points must be excluded
2338 Double_t xRef[9], yRef[9];
2339 xRef[0] = -0.5*sizeXtot;
2340 yRef[0] = 0.5*sizeYsector[0];
2341 xRef[1] = xRef[0] + sizeXsector[0] + sizeSep01;
2346 yRef[3] = yRef[2] - sizeYsector[2];
2347 xRef[4] = xRef[3] - sizeXsector[2];
2349 xRef[5] = xRef[4] - sizeSep12;
2350 yRef[5] = yRef[4] - sizeSep12;
2351 xRef[6] = xRef[5] - sizeXsector[1];
2353 xRef[7] = xRef[6] - sizeSep01;
2354 yRef[7] = yRef[6] - sizeSep01;
2358 // the above points are defined for the "right" MCM (if ve view the
2359 // stave from above) in order to change to the "left" one, we must
2360 // change the sign to all X values:
2361 if (isRight) for (i = 0; i < 9; i++) xRef[i] = -xRef[i];
2363 // the shape of the MCM and glue layer are done excluding point 1,
2364 // which is not necessary and cause the geometry builder to get confused
2366 Double_t xBase[8], yBase[8];
2367 for (i = 0; i < 9; i++) {
2368 if (i == 1) continue;
2374 // the MCM cover is superimposed over the zones 1 and 2 only
2375 Double_t xCap[6], yCap[6];
2377 for (i = 1; i <= 6; i++) {
2383 // define positions of chips,
2384 // which must be added to the bottom-left corner of MCM
2385 // and divided by 1E4;
2386 Double_t chipX[5], chipY[5];
2410 for (i = 0; i < 5; i++) {
2411 chipX[i] *= 0.00001;
2412 chipY[i] *= 0.00001;
2414 chipX[i] += xRef[3];
2415 chipY[i] += yRef[3];
2417 chipX[i] += xRef[8];
2418 chipY[i] += yRef[8];
2419 } // end for isRight
2420 chipLength[i] *= fgkmm;
2421 chipWidth[i] *= fgkmm;
2422 chipThickness[i] *= fgkmm;
2425 // create shapes for MCM
2427 TGeoXtru *shBase = new TGeoXtru(2);
2428 z1 = -0.5*thickness;
2429 z2 = z1 + mcmThickness;
2430 shBase->DefinePolygon(8, xBase, yBase);
2431 shBase->DefineSection(0, z1, 0., 0., 1.0);
2432 shBase->DefineSection(1, z2, 0., 0., 1.0);
2434 // create volumes of MCM
2435 TGeoVolume *volBase = new TGeoVolume("ITSSPDbase", shBase, medBase);
2436 volBase->SetLineColor(kRed);
2438 // to create the border of the MCM cover, it is required the
2439 // subtraction of two shapes the outer is created using the
2440 // reference points defined here
2441 TGeoXtru *shCapOut = new TGeoXtru(2);
2442 shCapOut->SetName(Form("ITSSPDshCAPOUT%s", suf));
2444 z2 = z1 + capHeight - capThickness;
2445 shCapOut->DefinePolygon(6, xCap, yCap);
2446 shCapOut->DefineSection(0, z1, 0., 0., 1.0);
2447 shCapOut->DefineSection(1, z2, 0., 0., 1.0);
2448 // the inner is built similarly but subtracting the thickness
2450 Double_t xin[6], yin[6];
2453 cs = TMath::Cos( 0.5*(TMath::Pi() - angle*TMath::DegToRad()) );
2454 xin[0] = xCap[0] + capThickness;
2455 yin[0] = yCap[0] - capThickness;
2456 xin[1] = xCap[1] - capThickness;
2459 yin[2] = yCap[2] + capThickness;
2460 xin[3] = xCap[3] - capThickness*cs;
2462 xin[4] = xin[3] - sizeSep12;
2463 yin[4] = yCap[4] + capThickness;
2468 cs = TMath::Cos( 0.5*(TMath::Pi() - angle*TMath::DegToRad()) );
2469 xin[0] = xCap[0] - capThickness;
2470 yin[0] = yCap[0] - capThickness;
2471 xin[1] = xCap[1] + capThickness;
2474 yin[2] = yCap[2] + capThickness;
2475 xin[3] = xCap[3] - capThickness*cs;
2477 xin[4] = xin[3] + sizeSep12;
2478 yin[4] = yCap[4] + capThickness;
2481 } // end if !isRight
2482 TGeoXtru *shCapIn = new TGeoXtru(2);
2483 shCapIn->SetName(Form("ITSSPDshCAPIN%s", suf));
2484 shCapIn->DefinePolygon(6, xin, yin);
2485 shCapIn->DefineSection(0, z1 - 0.01, 0., 0., 1.0);
2486 shCapIn->DefineSection(1, z2 + 0.01, 0., 0., 1.0);
2488 TGeoCompositeShape *shCapBorder = new TGeoCompositeShape(
2489 Form("ITSSPDshBORDER%s", suf),
2490 Form("%s-%s", shCapOut->GetName(),
2491 shCapIn->GetName()));
2493 TGeoVolume *volCapBorder = new TGeoVolume("ITSSPDcapBoarder",
2494 shCapBorder,medCap);
2495 volCapBorder->SetLineColor(kGreen);
2496 // finally, we create the top of the cover, which has the same
2497 // shape of outer border and a thickness equal of the one othe
2499 TGeoXtru *shCapTop = new TGeoXtru(2);
2501 z2 = z1 + capThickness;
2502 shCapTop->DefinePolygon(6, xCap, yCap);
2503 shCapTop->DefineSection(0, z1, 0., 0., 1.0);
2504 shCapTop->DefineSection(1, z2, 0., 0., 1.0);
2505 TGeoVolume *volCapTop = new TGeoVolume("ITSSPDcapTop", shCapTop, medCap);
2506 volCapTop->SetLineColor(kBlue);
2508 // create container assembly with right suffix
2509 TGeoVolumeAssembly *mcmAssembly = new TGeoVolumeAssembly(
2510 Form("ITSSPDmcm%s", suf));
2513 mcmAssembly->AddNode(volBase, 1, gGeoIdentity);
2515 for (i = 0; i < 5; i++) {
2516 TGeoVolume *box = gGeoManager->MakeBox(name[i],medChip,
2517 0.5*chipLength[i], 0.5*chipWidth[i], 0.5*chipThickness[i]);
2518 TGeoTranslation *tr = new TGeoTranslation(chipX[i],chipY[i],
2519 0.5*(-thickness + chipThickness[i]) + mcmThickness);
2520 box->SetLineColor(color[i]);
2521 mcmAssembly->AddNode(box, 1, tr);
2524 mcmAssembly->AddNode(volCapBorder, 1, gGeoIdentity);
2526 mcmAssembly->AddNode(volCapTop, 1, gGeoIdentity);
2532 //__________________________________________________________________________________________
2533 TGeoVolumeAssembly* AliITSv11GeometrySPD::CreatePixelBus
2534 (Bool_t isRight, TArrayD &sizes, TGeoManager *mgr) const
2537 // The pixel bus is implemented as a TGeoBBox with some objects on it,
2538 // which could affect the particle energy loss.
2540 // In order to avoid confusion, the bus is directly displaced
2541 // according to the axis orientations which are used in the final stave:
2542 // X --> thickness direction
2543 // Y --> width direction
2544 // Z --> length direction
2551 TGeoMedium *medBus = GetMedium("SPDBUS(AL+KPT+EPOX)$",mgr);
2552 TGeoMedium *medPt1000 = GetMedium("CERAMICS$",mgr); // ??? PT1000
2554 TGeoMedium *medCap = GetMedium("SDD X7R capacitors$",mgr);
2556 // TGeoMedium *medRes = GetMedium("SDD X7R capacitors$",mgr);
2557 TGeoMedium *medRes = GetMedium("ALUMINUM$",mgr);
2558 TGeoMedium *medExt = GetMedium("SDDKAPTON (POLYCH2)$", mgr);
2559 // ** SIZES & POSITIONS **
2560 Double_t busLength = 170.501 * fgkmm; // length of plane part
2561 Double_t busWidth = 13.800 * fgkmm; // width
2562 Double_t busThickness = 0.280 * fgkmm; // thickness
2563 Double_t pt1000Length = fgkmm * 1.50;
2564 Double_t pt1000Width = fgkmm * 3.10;
2565 Double_t pt1000Thickness = fgkmm * 0.60;
2566 Double_t pt1000Y, pt1000Z[10];// position of the pt1000's along the bus
2567 Double_t capLength = fgkmm * 2.55;
2568 Double_t capWidth = fgkmm * 1.50;
2569 Double_t capThickness = fgkmm * 1.35;
2570 Double_t capY[2], capZ[2];
2572 Double_t resLength = fgkmm * 2.20;
2573 Double_t resWidth = fgkmm * 0.80;
2574 Double_t resThickness = fgkmm * 0.35;
2575 Double_t resY[2], resZ[2];
2577 Double_t extThickness = fgkmm * 0.25;
2578 Double_t ext1Length = fgkmm * (26.7 - 10.0);
2579 Double_t ext2Length = fgkmm * (285.0 - ext1Length + extThickness);
2580 Double_t extWidth = fgkmm * 11.0;
2581 Double_t extHeight = fgkmm * 2.5;
2584 // position of pt1000, resistors and capacitors depends on the
2585 // bus if it's left or right one
2588 pt1000Z[0] = 66160.;
2589 pt1000Z[1] = 206200.;
2590 pt1000Z[2] = 346200.;
2591 pt1000Z[3] = 486200.;
2592 pt1000Z[4] = 626200.;
2593 pt1000Z[5] = 776200.;
2594 pt1000Z[6] = 916200.;
2595 pt1000Z[7] = 1056200.;
2596 pt1000Z[8] = 1196200.;
2597 pt1000Z[9] = 1336200.;
2608 pt1000Z[0] = 319700.;
2609 pt1000Z[1] = 459700.;
2610 pt1000Z[2] = 599700.;
2611 pt1000Z[3] = 739700.;
2612 pt1000Z[4] = 879700.;
2613 pt1000Z[5] = 1029700.;
2614 pt1000Z[6] = 1169700.;
2615 pt1000Z[7] = 1309700.;
2616 pt1000Z[8] = 1449700.;
2617 pt1000Z[9] = 1589700.;
2628 pt1000Y *= 1E-4 * fgkmm;
2629 for (i = 0; i < 10; i++) {
2630 pt1000Z[i] *= 1E-4 * fgkmm;
2632 capZ[i] *= 1E-4 * fgkmm;
2633 capY[i] *= 1E-4 * fgkmm;
2634 resZ[i] *= 1E-4 * fgkmm;
2635 resY[i] *= 1E-4 * fgkmm;
2639 Double_t &fullLength = sizes[1];
2640 Double_t &fullWidth = sizes[2];
2641 Double_t &fullThickness = sizes[0];
2642 fullLength = busLength;
2643 fullWidth = busWidth;
2644 // add the thickness of the thickest component on bus (capacity)
2645 fullThickness = busThickness + capThickness;
2647 TGeoVolumeAssembly *container = new TGeoVolumeAssembly("PixelBus");
2648 TGeoVolume *bus = mgr->MakeBox("Bus", medBus, 0.5*busThickness, 0.5*busWidth, 0.5*busLength);
2649 TGeoVolume *pt1000 = mgr->MakeBox("PT1000", medPt1000, 0.5*pt1000Thickness, 0.5*pt1000Width, 0.5*pt1000Length);
2650 TGeoVolume *res = mgr->MakeBox("Resistor", medRes, 0.5*resThickness, 0.5*resWidth, 0.5*resLength);
2651 TGeoVolume *cap = mgr->MakeBox("Capacitor", medCap, 0.5*capThickness, 0.5*capWidth, 0.5*capLength);
2652 TGeoVolume *ext1 = mgr->MakeBox("Extender1", medExt, 0.5*extThickness, 0.5*extWidth, 0.5*ext1Length);
2653 TGeoVolume *ext2 = mgr->MakeBox("Extender2", medExt, 0.5*extHeight - extThickness, 0.5*extWidth, 0.5*extThickness);
2654 TGeoVolume *ext3 = mgr->MakeBox("Extender3", medExt, extThickness, 0.5*extWidth, 0.5*ext2Length);
2655 bus->SetLineColor(kYellow + 2);
2656 pt1000->SetLineColor(kGreen + 3);
2657 res->SetLineColor(kRed + 1);
2658 cap->SetLineColor(kBlue - 7);
2659 ext1->SetLineColor(kGray);
2660 ext2->SetLineColor(kGray);
2661 ext3->SetLineColor(kGray);
2663 // ** MOVEMENTS AND POSITIONEMENT **
2665 TGeoTranslation *trBus = new TGeoTranslation(0.5 * (busThickness -
2666 fullThickness), 0.0, 0.0);
2667 container->AddNode(bus, 0, trBus);
2668 Double_t zRef, yRef, x, y, z;
2670 zRef = -0.5*fullLength;
2671 yRef = -0.5*fullWidth;
2673 zRef = -0.5*fullLength;
2674 yRef = -0.5*fullWidth;
2677 x = 0.5*(pt1000Thickness - fullThickness) + busThickness;
2678 for (i = 0; i < 10; i++) {
2680 z = zRef + pt1000Z[i];
2681 TGeoTranslation *tr = new TGeoTranslation(x, y, z);
2682 container->AddNode(pt1000, i, tr);
2685 x = 0.5*(capThickness - fullThickness) + busThickness;
2686 for (i = 0; i < 2; i++) {
2689 TGeoTranslation *tr = new TGeoTranslation(x, y, z);
2690 container->AddNode(cap, i, tr);
2693 x = 0.5*(resThickness - fullThickness) + busThickness;
2694 for (i = 0; i < 2; i++) {
2697 TGeoTranslation *tr = new TGeoTranslation(x, y, z);
2698 container->AddNode(res, i, tr);
2702 y = 0.5 * (-fullWidth + extWidth);
2703 z = 0.5 * (-fullLength + fgkmm * 10.0);
2706 y = 0.5 * (fullWidth - extWidth);
2707 z = 0.5 * ( fullLength - fgkmm * 10.0);
2709 x = 0.5 * (extThickness - fullThickness) + busThickness;
2710 //y = 0.5 * (fullWidth - extWidth);
2711 TGeoTranslation *trExt1 = new TGeoTranslation(x, y, z);
2713 z -= 0.5 * (ext1Length - extThickness);
2716 z += 0.5 * (ext1Length - extThickness);
2718 x += 0.5*(extHeight - extThickness);
2719 TGeoTranslation *trExt2 = new TGeoTranslation(x, y, z);
2721 z -= 0.5 * (ext2Length - extThickness);
2724 z += 0.5 * (ext2Length - extThickness);
2726 x += 0.5*(extHeight - extThickness) + extThickness;
2727 TGeoTranslation *trExt3 = new TGeoTranslation(x, y, z);
2728 container->AddNode(ext1, 0, trExt1);
2729 container->AddNode(ext2, 0, trExt2);
2730 container->AddNode(ext3, 0, trExt3);
2733 sizes[3] = yRef + pt1000Y;
2734 sizes[4] = zRef + pt1000Z[2];
2735 sizes[5] = zRef + pt1000Z[7];
2741 //______________________________________________________________________
2742 TGeoVolumeAssembly* AliITSv11GeometrySPD::CreatePixelBus
2743 (Bool_t isRight, Int_t ilayer, TArrayD &sizes, TGeoManager *mgr) const
2746 // The pixel bus is implemented as a TGeoBBox with some objects on it,
2747 // which could affect the particle energy loss.
2749 // In order to avoid confusion, the bus is directly displaced
2750 // according to the axis orientations which are used in the final stave:
2751 // X --> thickness direction
2752 // Y --> width direction
2753 // Z --> length direction
2756 // ** CRITICAL CHECK ******************************************************
2757 // layer number can be ONLY 1 or 2
2758 if (ilayer != 1 && ilayer != 2) AliFatal("Layer number MUST be 1 or 2");
2762 TGeoMedium *medBus = GetMedium("SPDBUS(AL+KPT+EPOX)$",mgr);
2763 TGeoMedium *medPt1000 = GetMedium("CERAMICS$",mgr); // ??? PT1000
2765 TGeoMedium *medCap = GetMedium("SDD X7R capacitors$",mgr);
2767 //TGeoMedium *medRes = GetMedium("SDD X7R capacitors$",mgr);
2768 TGeoMedium *medRes = GetMedium("ALUMINUM$",mgr);
2769 TGeoMedium *medExt = GetMedium("SDDKAPTON (POLYCH2)$", mgr);
2770 // ** SIZES & POSITIONS **
2771 Double_t busLength = 170.501 * fgkmm; // length of plane part
2772 Double_t busWidth = 13.800 * fgkmm; // width
2773 Double_t busThickness = 0.280 * fgkmm; // thickness
2774 Double_t pt1000Length = fgkmm * 1.50;
2775 Double_t pt1000Width = fgkmm * 3.10;
2776 Double_t pt1000Thickness = fgkmm * 0.60;
2777 Double_t pt1000Y, pt1000Z[10];// position of the pt1000's along the bus
2778 Double_t capLength = fgkmm * 2.55;
2779 Double_t capWidth = fgkmm * 1.50;
2780 Double_t capThickness = fgkmm * 1.35;
2781 Double_t capY[2], capZ[2];
2783 Double_t resLength = fgkmm * 2.20;
2784 Double_t resWidth = fgkmm * 0.80;
2785 Double_t resThickness = fgkmm * 0.35;
2786 Double_t resY[2], resZ[2];
2788 Double_t extThickness = fgkmm * 0.25;
2789 Double_t ext1Length = fgkmm * (26.7 - 10.0);
2790 Double_t ext2Length = fgkmm * (284.0 - ext1Length + extThickness);
2791 Double_t extWidth = fgkmm * 11.0;
2792 Double_t extHeight = fgkmm * 2.5;
2794 // position of pt1000, resistors and capacitors depends on the
2795 // bus if it's left or right one
2798 pt1000Z[0] = 66160.;
2799 pt1000Z[1] = 206200.;
2800 pt1000Z[2] = 346200.;
2801 pt1000Z[3] = 486200.;
2802 pt1000Z[4] = 626200.;
2803 pt1000Z[5] = 776200.;
2804 pt1000Z[6] = 916200.;
2805 pt1000Z[7] = 1056200.;
2806 pt1000Z[8] = 1196200.;
2807 pt1000Z[9] = 1336200.;
2818 pt1000Z[0] = 319700.;
2819 pt1000Z[1] = 459700.;
2820 pt1000Z[2] = 599700.;
2821 pt1000Z[3] = 739700.;
2822 pt1000Z[4] = 879700.;
2823 pt1000Z[5] = 1029700.;
2824 pt1000Z[6] = 1169700.;
2825 pt1000Z[7] = 1309700.;
2826 pt1000Z[8] = 1449700.;
2827 pt1000Z[9] = 1589700.;
2838 pt1000Y *= 1E-4 * fgkmm;
2839 for (i = 0; i < 10; i++) {
2840 pt1000Z[i] *= 1E-4 * fgkmm;
2842 capZ[i] *= 1E-4 * fgkmm;
2843 capY[i] *= 1E-4 * fgkmm;
2844 resZ[i] *= 1E-4 * fgkmm;
2845 resY[i] *= 1E-4 * fgkmm;
2849 Double_t &fullLength = sizes[1];
2850 Double_t &fullWidth = sizes[2];
2851 Double_t &fullThickness = sizes[0];
2852 fullLength = busLength;
2853 fullWidth = busWidth;
2854 // add the thickness of the thickest component on bus (capacity)
2855 fullThickness = busThickness + capThickness;
2858 TGeoVolumeAssembly *container = new TGeoVolumeAssembly("ITSSPDpixelBus");
2859 TGeoVolume *bus = mgr->MakeBox("ITSSPDbus", medBus, 0.5*busThickness,
2860 0.5*busWidth, 0.5*busLength);
2861 TGeoVolume *pt1000 = mgr->MakeBox("ITSSPDpt1000",medPt1000,
2862 0.5*pt1000Thickness,0.5*pt1000Width, 0.5*pt1000Length);
2863 TGeoVolume *res = mgr->MakeBox("ITSSPDresistor", medRes, 0.5*resThickness,
2864 0.5*resWidth, 0.5*resLength);
2865 TGeoVolume *cap = mgr->MakeBox("ITSSPDcapacitor", medCap, 0.5*capThickness,
2866 0.5*capWidth, 0.5*capLength);
2868 TGeoVolume *ext1 = mgr->MakeBox("Extender1", medExt, 0.5*extThickness, 0.5*extWidth, 0.5*ext1Length);
2869 TGeoVolume *ext2 = mgr->MakeBox("Extender2", medExt, 0.5*extHeight - 2.*extThickness, 0.5*extWidth, 0.5*extThickness);
2870 TGeoVolume *ext3 = mgr->MakeBox("Extender3", medExt, 0.5*extThickness, 0.5*(extWidth-0.8*fgkmm), 0.5*ext2Length + extThickness); // Hardcode fix of a small overlap
2871 bus->SetLineColor(kYellow + 2);
2872 pt1000->SetLineColor(kGreen + 3);
2873 res->SetLineColor(kRed + 1);
2874 cap->SetLineColor(kBlue - 7);
2875 ext1->SetLineColor(kGray);
2876 ext2->SetLineColor(kGray);
2877 ext3->SetLineColor(kGray);
2879 // ** MOVEMENTS AND POSITIONEMENT **
2881 TGeoTranslation *trBus = new TGeoTranslation(0.5 * (busThickness -
2882 fullThickness), 0.0, 0.0);
2883 container->AddNode(bus, 1, trBus);
2884 Double_t zRef, yRef, x, y, z;
2886 zRef = -0.5*fullLength;
2887 yRef = -0.5*fullWidth;
2889 zRef = -0.5*fullLength;
2890 yRef = -0.5*fullWidth;
2893 x = 0.5*(pt1000Thickness - fullThickness) + busThickness;
2894 for (i = 0; i < 10; i++) {
2896 z = zRef + pt1000Z[i];
2897 TGeoTranslation *tr = new TGeoTranslation(x, y, z);
2898 container->AddNode(pt1000, i+1, tr);
2901 x = 0.5*(capThickness - fullThickness) + busThickness;
2902 for (i = 0; i < 2; i++) {
2905 TGeoTranslation *tr = new TGeoTranslation(x, y, z);
2906 container->AddNode(cap, i+1, tr);
2909 x = 0.5*(resThickness - fullThickness) + busThickness;
2910 for (i = 0; i < 2; i++) {
2913 TGeoTranslation *tr = new TGeoTranslation(x, y, z);
2914 container->AddNode(res, i+1, tr);
2920 y = 0.5 * (fullWidth - extWidth) - 0.1;
2921 z = 0.5 * (-fullLength + fgkmm * 10.0);
2924 y = 0.5 * (fullWidth - extWidth) - 0.1;
2925 z = 0.5 * ( fullLength - fgkmm * 10.0);
2930 y = -0.5 * (fullWidth - extWidth);
2931 z = 0.5 * (-fullLength + fgkmm * 10.0);
2934 y = -0.5 * (fullWidth - extWidth);
2935 z = 0.5 * ( fullLength - fgkmm * 10.0);
2938 x = 0.5 * (extThickness - fullThickness) + busThickness;
2939 //y = 0.5 * (fullWidth - extWidth);
2940 TGeoTranslation *trExt1 = new TGeoTranslation(x, y, z);
2942 z -= 0.5 * (ext1Length - extThickness);
2945 z += 0.5 * (ext1Length - extThickness);
2947 x += 0.5*(extHeight - 3.*extThickness);
2948 TGeoTranslation *trExt2 = new TGeoTranslation(x, y, z);
2950 z -= 0.5 * (ext2Length - extThickness) + 2.5*extThickness;
2953 z += 0.5 * (ext2Length - extThickness) + 2.5*extThickness;
2955 x += 0.5*(extHeight - extThickness) - 2.*extThickness;
2956 TGeoTranslation *trExt3 = new TGeoTranslation(x, y, z);
2957 container->AddNode(ext1, 0, trExt1);
2958 container->AddNode(ext2, 0, trExt2);
2959 container->AddNode(ext3, 0, trExt3);
2961 sizes[3] = yRef + pt1000Y;
2962 sizes[4] = zRef + pt1000Z[2];
2963 sizes[5] = zRef + pt1000Z[7];
2968 //______________________________________________________________________
2969 TGeoVolumeAssembly* AliITSv11GeometrySPD::CreateConeModule(TGeoManager *mgr) const
2971 TGeoMedium *medInox = GetMedium("INOX$",mgr);
2972 TGeoMedium *medExt = GetMedium("SDDKAPTON (POLYCH2)$", mgr);
2973 TGeoMedium *medPlate = GetMedium("SPD C (M55J)$", mgr);
2975 Double_t extThickness = fgkmm * 0.25;
2976 Double_t ext1Length = fgkmm * (26.7 - 10.0);
2977 Double_t ext2Length = fgkmm * (285.0 - ext1Length + extThickness);
2979 Double_t cableThickness = 1.5 * fgkmm;
2980 Double_t cableL1 = 350.0 * fgkmm - extThickness - ext1Length - ext2Length;
2981 Double_t cableL2 = 426.0 * fgkmm;
2982 //Double_t cableL3 = 570.0 * fgkmm;
2983 Double_t cableL3 = 57.0 * fgkmm;
2984 Double_t cableW1 = 11.0 * fgkmm;
2985 Double_t cableW2 = 30.0 * fgkmm;
2986 Double_t cableW3 = 50.0 * fgkmm;
2988 Double_t mcmThickness = 1.2 *fgkmm;
2989 Double_t mcmLength = cableL1 + cableL2 + cableL3;
2990 Double_t mcmWidth = cableW1;
2992 Double_t plateLength = 200.0 * fgkmm;
2993 Double_t plateWidth = 50.0 * fgkmm;
2994 Double_t plateThickness = 5.0 * fgkmm;
2996 Double_t x[12], y[12];
2999 y[0] = 0.0 + 0.5 * cableW1;
3001 x[1] = x[0] + cableL1 - 0.5*(cableW2 - cableW1);
3004 x[2] = x[0] + cableL1;
3005 y[2] = y[1] + 0.5*(cableW2 - cableW1);
3007 x[3] = x[2] + cableL2;
3010 x[4] = x[3] + 0.5*(cableW3 - cableW2);
3011 y[4] = y[3] + 0.5*(cableW3 - cableW2);
3013 x[5] = x[4] + cableL3 - 0.5*(cableW3 - cableW2);
3016 for (Int_t i = 6; i < 12; i++) {
3021 TGeoVolumeAssembly *container = new TGeoVolumeAssembly("ITSSPDConeModule");
3023 TGeoXtru *shCable = new TGeoXtru(2);
3024 shCable->DefinePolygon(12, x, y);
3025 shCable->DefineSection(0, 0., 0., 0., 1.0);
3026 shCable->DefineSection(1, cableThickness, 0., 0., 1.0);
3028 TGeoVolume *volCable = new TGeoVolume("ITSSPDExtender", shCable, medExt);
3029 volCable->SetLineColor(kGreen);
3031 TGeoVolume *volTube = gGeoManager->MakeTube("ITSSPDCoolingTubeCone", medInox, 5.*fgkmm, 6.*fgkmm, 0.5*(x[5] - x[0]));
3032 volTube->SetLineColor(kGray);
3034 Double_t thickness = cableThickness + mcmThickness;
3035 TGeoBBox *shOut = new TGeoBBox("ITSSPD_shape_plateout", 0.5*plateThickness, 0.5*plateLength, 0.5*plateWidth);
3036 TGeoBBox *shIn = new TGeoBBox("ITSSPD_shape_platein", 0.5*thickness, 0.52*plateLength, 0.5*cableW2);
3038 sprintf(string, "%s-%s", shOut->GetName(), shIn->GetName());
3039 TGeoCompositeShape *shPlate = new TGeoCompositeShape("ITSSPDPlate_shape", string);
3040 TGeoVolume *volPlate = new TGeoVolume("ITSSPDPlate", shPlate, medPlate);
3041 volPlate->SetLineColor(kRed);
3043 TGeoVolume *volMCMExt = gGeoManager->MakeBox("ITSSPDextenderMCM", medExt, 0.5*mcmThickness, 0.5*mcmLength, 0.5*mcmWidth);
3044 volMCMExt->SetLineColor(kGreen+3);
3046 TGeoRotation *rot = new TGeoRotation(*gGeoIdentity);
3049 container->AddNode(volCable, 0, rot);
3051 TGeoTranslation *combi = new TGeoTranslation(cableThickness + 0.5*mcmThickness, x[0] + 0.5*mcmLength, 0.0);
3052 container->AddNode(volMCMExt, 0, combi);
3054 TGeoRotation *rot1 = new TGeoRotation(*gGeoIdentity);
3055 rot1->RotateX(87.5);
3056 TGeoCombiTrans *tr = new TGeoCombiTrans(1.0, x[0] + 0.5*(x[5] - x[0]), -2.95, rot1);
3057 container->AddNode(volTube, 0, tr);
3059 TGeoTranslation *tr1 = new TGeoTranslation(0.5*plateThickness - 0.5*(plateThickness-thickness), x[3] - x[0] - 0.52*plateLength, 0.0);
3060 container->AddNode(volPlate, 0, tr1);
3065 //______________________________________________________________________
3066 void AliITSv11GeometrySPD::CreateCones(TGeoVolume *moth) const
3069 TGeoVolumeAssembly *module = CreateConeModule(gGeoManager);
3071 //Double_t angle[10] = {18., 54., 90., 126., 162., -18., -54., -90., -126., -162.};
3072 Double_t angle1[10] = {18., 54., 90., 129., 165., 201.0, 237.0, 273.0, 309.0, 345.0};
3073 Double_t angle2[10] = {18., 53., 90., 126., 162., 198.0, 233.0, 270.0, 309.0, 342.0};
3074 for (Int_t i = 0; i < 10; i++) {
3075 TGeoRotation *rot1 = new TGeoRotation(*gGeoIdentity);
3076 rot1->RotateY(-90.0);
3077 rot1->RotateX(43.7);
3079 rot1->RotateZ(90.0 - angle1[i]);
3080 TGeoCombiTrans *tr1 = new TGeoCombiTrans(0.0, 0.0, 40.4, rot1);
3081 moth->AddNode(module, 2*i, tr1);
3082 TGeoRotation *rot2 = new TGeoRotation(*gGeoIdentity);
3083 rot2->RotateY(90.0);
3084 rot2->RotateX(-43.7);
3086 rot2->RotateZ(90.0 - angle2[i]);
3087 TGeoCombiTrans *tr2 = new TGeoCombiTrans(0.0, 0.0, -40.4, rot2);
3088 moth->AddNode(module, 2*i+1, tr2);
3092 //______________________________________________________________________
3093 TGeoVolume* AliITSv11GeometrySPD::CreateExtender(
3094 const Double_t *extenderParams, const TGeoMedium *extenderMedium,
3095 TArrayD& sizes) const
3098 // ------------------ CREATE AN EXTENDER ------------------------
3100 // This function creates the following picture (in plane xOy)
3101 // Should be useful for the definition of the pixel bus and MCM extenders
3102 // The origin corresponds to point 0 on the picture, at half-width
3106 // ^ +---+---------------------+
3109 // 0------> X / +---------------------+
3116 // ---> +-----------+---+
3122 // Takes 6 parameters in the following order :
3123 // |--> par 0 : inner length [0-1] / [9-8]
3124 // |--> par 1 : thickness ( = [0-9] / [4-5])
3125 // |--> par 2 : angle of the slope
3126 // |--> par 3 : total height in local Y direction
3127 // |--> par 4 : outer length [3-4] / [6-5]
3128 // |--> par 5 : width in local Z direction
3130 Double_t slopeDeltaX = (extenderParams[3] - extenderParams[1]
3131 * TMath::Cos(extenderParams[2])) /
3132 TMath::Tan(extenderParams[2]);
3133 Double_t extenderXtruX[10] = {
3136 extenderParams[0]+extenderParams[1]*TMath::Sin(extenderParams[2]) ,
3137 extenderParams[0]+extenderParams[1]*TMath::Sin(extenderParams[2])+
3139 extenderParams[0]+extenderParams[1]*TMath::Sin(extenderParams[2])+
3140 slopeDeltaX + extenderParams[4],
3141 extenderParams[0]+extenderParams[1]*TMath::Sin(extenderParams[2])+
3142 slopeDeltaX + extenderParams[4],
3143 extenderParams[0]+extenderParams[1]*TMath::Sin(extenderParams[2])+
3145 extenderParams[0]+extenderParams[1]*TMath::Sin(extenderParams[2])+
3146 slopeDeltaX - extenderParams[1] * TMath::Sin(extenderParams[2]) ,
3150 Double_t extenderXtruY[10] = {
3153 extenderParams[1] * (1-TMath::Cos(extenderParams[2])) ,
3154 extenderParams[3] - extenderParams[1] ,
3155 extenderParams[3] - extenderParams[1] ,
3158 extenderParams[3]-extenderParams[1]*(1-TMath::Cos(extenderParams[2])) ,
3163 if (sizes.GetSize() != 3) sizes.Set(3);
3164 Double_t &thickness = sizes[0];
3165 Double_t &length = sizes[1];
3166 Double_t &width = sizes[2];
3168 thickness = extenderParams[3];
3169 width = extenderParams[5];
3170 length = extenderParams[0]+extenderParams[1]*
3171 TMath::Sin(extenderParams[2])+slopeDeltaX+extenderParams[4];
3173 // creation of the volume
3174 TGeoXtru *extenderXtru = new TGeoXtru(2);
3175 TGeoVolume *extenderXtruVol = new TGeoVolume("ITSSPDextender",extenderXtru,
3177 extenderXtru->DefinePolygon(10,extenderXtruX,extenderXtruY);
3178 extenderXtru->DefineSection(0,-0.5*extenderParams[4]);
3179 extenderXtru->DefineSection(1, 0.5*extenderParams[4]);
3180 return extenderXtruVol;
3182 //______________________________________________________________________
3183 TGeoVolumeAssembly* AliITSv11GeometrySPD::CreatePixelBusAndExtensions
3184 (Bool_t /*zpos*/, TGeoManager *mgr) const
3187 // Creates an assembly which contains the pixel bus and its extension
3188 // and the extension of the MCM.
3189 // By: Renaud Vernet
3190 // NOTE: to be defined its material and its extension in the outside
3193 // ==== constants =====
3196 //TGeoMedium *medPixelBus = GetMedium("SPDBUS(AL+KPT+EPOX)$",mgr);
3197 // IXEL BUS EXTENDER
3198 TGeoMedium *medPBExtender = GetMedium("SDDKAPTON (POLYCH2)$",mgr);
3200 TGeoMedium *medMCMExtender = GetMedium("SDDKAPTON (POLYCH2)$",mgr);
3201 // //geometrical constants
3202 const Double_t kPbextenderThickness = 0.07 * fgkmm;
3203 //design=?? 70 deg. seems OK
3204 const Double_t kPbExtenderSlopeAngle = 70.0 * TMath::Pi()/180.;
3205 // = 2.6 - (0.28+0.05+0.35) cf design
3206 const Double_t kPbExtenderHeight = 1.92 * fgkmm;
3207 const Double_t kPbExtenderWidthY = 11.0 * fgkmm;
3208 //design=?? 70 deg. seems OK
3209 const Double_t kMcmExtenderSlopeAngle = 70.0 * TMath::Pi()/180.;
3210 const Double_t kMcmExtenderThickness = 0.10 * fgkmm;
3211 const Double_t kMcmExtenderHeight = 1.8 * fgkmm;
3212 const Double_t kMcmExtenderWidthY = kPbExtenderWidthY;
3213 // const Double_t groundingThickness = 0.07 * fgkmm;
3214 // const Double_t grounding2pixelBusDz = 0.625 * fgkmm;
3215 // const Double_t pixelBusThickness = 0.28 * fgkmm;
3216 // const Double_t groundingWidthX = 170.501 * fgkmm;
3217 // const Double_t pixelBusContactDx = 1.099 * fgkmm;
3218 // const Double_t pixelBusWidthY = 13.8 * fgkmm;
3220 // const Double_t pixelBusContactPhi = 20.0 * TMath::Pi()/180.
3221 // const Double_t pbExtenderTopZ = 2.72 * fgkmm;
3222 // const Double_t mcmThickness = 0.35 * fgkmm;
3223 // const Double_t halfStaveTotalLength = 247.64 * fgkmm;
3224 // const Double_t deltaYOrigin = 15.95/2.* fgkmm;
3225 // const Double_t deltaXOrigin = 1.1 * fgkmm;
3226 // const Double_t deltaZOrigin = halfStaveTotalLength / 2.;
3227 // const Double_t grounding2pixelBusDz2 = grounding2pixelBusDz+
3228 // groundingThickness/2. + pixelBusThickness/2.;
3229 // const Double_t pixelBusWidthX = groundingWidthX;
3230 // const Double_t pixelBusRaiseLength = (pixelBusContactDx-
3231 // pixelBusThickness*TMath::Sin(pixelBusContactPhi))/
3232 // TMath::Cos(pixelBusContactPhi);
3233 // const Double_t pbExtenderBaseZ = grounding2pixelBusDz2 +
3234 // pixelBusRaiseLength*TMath::Sin(pixelBusContactPhi) +
3235 // 2*pixelBusThickness*TMath::Sin(pixelBusContactPhi)*
3236 // TMath::Tan(pixelBusContactPhi);
3237 // const Double_t pbExtenderDeltaZ = pbExtenderTopZ-pbExtenderBaseZ;
3238 // const Double_t pbExtenderEndPointX = 2*deltaZOrigin -
3239 // groundingWidthX - 2*pixelBusThickness*TMath::Sin(pixelBusContactPhi);
3240 // const Double_t pbExtenderXtru3L = 1.5 * fgkmm; //arbitrary ?
3241 // const Double_t pbExtenderXtru4L = (pbExtenderDeltaZ +
3242 // pixelBusThickness*(TMath::Cos(extenderSlope)-2))/
3243 // TMath::Sin(extenderSlope);
3244 // const Double_t kMcmExtenderEndPointX = deltaZOrigin - 48.2 * fgkmm;
3245 // const Double_t kMcmExtenderXtru3L = 1.5 * fgkmm;
3246 // //===== end constants =====
3247 const Double_t kPbExtenderInnerLength = 10. * fgkmm;
3248 const Double_t kPbExtenderOuterLength = 15. * fgkmm;
3249 const Double_t kMcmExtenderInnerLength = 10. * fgkmm;
3250 const Double_t kMcmExtenderOuterLength = 15. * fgkmm;
3251 Double_t pbExtenderParams[6] = {kPbExtenderInnerLength, //0
3252 kPbextenderThickness, //1
3253 kPbExtenderSlopeAngle, //2
3254 kPbExtenderHeight, //3
3255 kPbExtenderOuterLength, //4
3256 kPbExtenderWidthY}; //5
3258 Double_t mcmExtenderParams[6] = {kMcmExtenderInnerLength, //0
3259 kMcmExtenderThickness, //1
3260 kMcmExtenderSlopeAngle, //2
3261 kMcmExtenderHeight, //3
3262 kMcmExtenderOuterLength, //4
3263 kMcmExtenderWidthY}; //5
3266 TGeoVolume* pbExtender = CreateExtender(pbExtenderParams,medPBExtender,
3268 if(GetDebug(1))printf("CREATED AN EXTENDER : THICKNESS = %5.5f cm\t"
3269 "LENGTH=%5.5f cm\tWIDTH=%5.5f cm\n",sizes[0],sizes[1],sizes[2]);
3270 TGeoVolume* mcmExtender = CreateExtender(mcmExtenderParams,medMCMExtender,
3272 if(GetDebug(1))printf("CREATED AN EXTENDER : THICKNESS = %5.5f cm\t"
3273 "LENGTH=%5.5f cm\tWIDTH=%5.5f cm\n",sizes[0],sizes[1],sizes[2]);
3274 // Double_t pixelBusValues[5] = {pixelBusWidthX, //0
3275 // pixelBusThickness, //1
3276 // pixelBusContactPhi, //2
3277 // pixelBusRaiseLength, //3
3278 // pixelBusWidthY}; //4
3280 // Double_t pbExtenderValues[8] = {pixelBusRaiseLength, //0
3281 // pixelBusContactPhi, //1
3282 // pbExtenderXtru3L, //2
3283 // pixelBusThickness, //3
3284 // extenderSlope, //4
3285 // pbExtenderXtru4L, //5
3286 // pbExtenderEndPointX, //6
3287 // kPbExtenderWidthY}; //7
3289 // Double_t mcmExtenderValues[6] = {mcmExtenderXtru3L, //0
3290 // mcmExtenderThickness, //1
3291 // extenderSlope, //2
3292 // deltaMcmMcmExtender, //3
3293 // mcmExtenderEndPointX, //4
3294 // mcmExtenderWidthY}; //5
3295 // TGeoVolumeAssembly *pixelBus=new TGeoVolumeAssembly("ITSSPDpixelBus");
3296 // CreatePixelBus(pixelBus,pixelBusValues,medPixelBus);
3297 // TGeoVolumeAssembly *pbExtender = new TGeoVolumeAssembly(
3298 // "ITSSPDpixelBusExtender");
3299 // CreatePixelBusExtender(pbExtender,pbExtenderValues,medPBExtender);
3300 // TGeoVolumeAssembly *mcmExtender = new TGeoVolumeAssembly(
3301 // "ITSSPDmcmExtender");
3302 // CreateMCMExtender(mcmExtender,mcmExtenderValues,medMCMExtender);
3303 //-------------- DEFINITION OF GEOMETRICAL TRANSFORMATIONS --------
3304 // TGeoRotation * commonRot = new TGeoRotation("commonRot",0,90,0);
3305 // commonRot->MultiplyBy(new TGeoRotation("rot",-90,0,0));
3306 // TGeoTranslation * pixelBusTrans = new TGeoTranslation(
3307 // pixelBusThickness/2. - deltaXOrigin + 0.52*fgkmm ,
3308 // -pixelBusWidthY/2. + deltaYOrigin ,
3309 // -groundingWidthX/2. + deltaZOrigin);
3310 // TGeoRotation *pixelBusRot = new TGeoRotation(*commonRot);
3311 // TGeoTranslation *pbExtenderTrans =new TGeoTranslation(*pixelBusTrans);
3312 // TGeoRotation *pbExtenderRot = new TGeoRotation(*pixelBusRot);
3313 // pbExtenderTrans->SetDz(*(pbExtenderTrans->GetTranslation()+2) -
3314 // pixelBusWidthX/2. - 2*pixelBusThickness*
3315 // TMath::Sin(pixelBusContactPhi));
3317 // pbExtenderTrans->SetDy(*(pbExtenderTrans->GetTranslation()+1) -
3318 // (pixelBusWidthY - kPbExtenderWidthY)/2.);
3320 // pbExtenderTrans->SetDy(*(pbExtenderTrans->GetTranslation()+1) +
3321 // (pixelBusWidthY - kPbExtenderWidthY)/2.);
3323 // pbExtenderTrans->SetDx(*(pbExtenderTrans->GetTranslation()) +
3324 // pixelBusThickness/2 + 2*pixelBusThickness*
3325 // TMath::Sin(pixelBusContactPhi)*
3326 // TMath::Tan(pixelBusContactPhi));
3327 // TGeoTranslation * mcmExtenderTrans = new TGeoTranslation(0.12*fgkmm +
3328 // mcmThickness - deltaXOrigin,
3329 // pbExtenderTrans->GetTranslation()[1],
3331 // TGeoRotation * mcmExtenderRot = new TGeoRotation(*pbExtenderRot);
3332 // // add pt1000 components
3333 // Double_t pt1000Z = fgkmm * 64400. * 1E-4;
3334 // //Double_t pt1000X[10] = {319700., 459700., 599700., 739700.,
3335 // 879700., 1029700., 1169700., 1309700.,
3336 // 1449700., 1589700.};
3337 // Double_t pt1000X[10] ={66160., 206200., 346200., 486200., 626200.,
3338 // 776200., 916200., 1056200., 1196200., 1336200.};
3339 // Double_t pt1000size[3] = {fgkmm*1.5, fgkmm*0.6, fgkmm*3.1};
3341 // for (i = 0; i < 10; i++) {
3342 // pt1000X[i] *= fgkmm * 1E-4;
3344 // TGeoVolume *pt1000 = mgr->MakeBox("ITSSPDpt1000",0,0.5*pt1000size[0],
3345 // 0.5*pt1000size[1], 0.5*pt1000size[2]);
3346 // pt1000->SetLineColor(kGray);
3347 // Double_t refThickness = - pixelBusThickness;
3348 // for (i = 0; i < 10; i++) {
3349 // TGeoTranslation *tr = new TGeoTranslation(pt1000X[i]-
3350 // 0.5*pixelBusWidthX, 0.002+0.5*(-3.*refThickness+pt1000size[3]),
3351 // pt1000Z -0.5*pixelBusWidthY);
3352 // pixelBus->AddNode(pt1000, i+1, tr);
3355 //CREATE FINAL VOLUME ASSEMBLY AND ROTATE IT
3356 TGeoVolumeAssembly *assembly = new TGeoVolumeAssembly("ITSSPDextenders");
3357 // assembly->AddNode((TGeoVolume*)pixelBus,1,
3358 // new TGeoCombiTrans(*pixelBusTrans,*pixelBusRot));
3359 // assembly->AddNode((TGeoVolume*)pbExtender,1,
3360 // new TGeoCombiTrans(*pbExtenderTrans,*pbExtenderRot));
3361 // assembly->AddNode((TGeoVolume*)mcmExtender,1,
3362 // new TGeoCombiTrans(*mcmExtenderTrans,*mcmExtenderRot));
3363 // assembly->AddNode(mcmExtender,1,new TGeoIdentity());
3364 assembly->AddNode(pbExtender,1);
3365 assembly->AddNode(mcmExtender,1);
3366 // assembly->SetTransparency(50);
3370 //______________________________________________________________________
3371 TGeoVolumeAssembly* AliITSv11GeometrySPD::CreateHalfStave(Bool_t isRight,
3372 Int_t layer,Int_t idxCentral,Int_t idxSide,TArrayD &sizes,TGeoManager *mgr)
3375 // Implementation of an half-stave, which depends on the side where
3376 // we are on the stave. The convention for "left" and "right" is the
3377 // same as for the MCM. The return value is a TGeoAssembly which is
3378 // structured in such a way that the origin of its local reference
3379 // frame coincides with the origin of the whole stave.
3380 // The TArrayD passed by reference will contain details of the shape:
3381 // - sizes[0] = thickness
3382 // - sizes[1] = length
3383 // - sizes[2] = width
3384 // - sizes[3] = common 'x' position for eventual clips
3385 // - sizes[4] = common 'y' position for eventual clips
3386 // - sizes[5] = 'z' position of first clip
3387 // - sizes[6] = 'z' position of second clip
3392 // idxCentral and idxSide must be different
3393 if (idxCentral == idxSide) {
3394 AliInfo("Ladders must be inserted in half-stave with "
3395 "different indexes.");
3396 idxSide = idxCentral + 1;
3397 AliInfo(Form("Central ladder will be inserted with index %d",
3399 AliInfo(Form("Side ladder will be inserted with index %d",idxSide));
3402 // define the separations along Z direction between the objects
3403 Double_t sepLadderLadder = fgkmm * 0.2; // sep. btw the 2 ladders
3404 Double_t sepLadderCenter = fgkmm * 0.4; // sep. btw the "central" ladder
3405 // and the Z=0 plane in stave ref.
3406 Double_t sepLadderMCM = fgkmm * 0.3; // sep. btw the "external" ladder
3408 Double_t sepBusCenter = fgkmm * 0.3; // sep. btw the bus central edge
3409 // and the Z=0 plane in stave ref.
3414 TArrayD grndSize(3);
3415 // This one line repalces the 3 bellow, BNS.
3416 TGeoVolume *grndVol = CreateGroundingFoil(isRight, grndSize, mgr);
3417 Double_t &grndThickness = grndSize[0];
3418 Double_t &grndLength = grndSize[1];
3421 TArrayD ladderSize(3);
3422 TGeoVolume *ladder = CreateLadder(layer, ladderSize, mgr);
3423 Double_t ladderThickness = ladderSize[0];
3424 Double_t ladderLength = ladderSize[1];
3425 Double_t ladderWidth = ladderSize[2];
3429 TGeoVolumeAssembly *mcm = CreateMCM(!isRight,mcmSize,mgr);
3430 Double_t mcmThickness = mcmSize[0];
3431 Double_t mcmLength = mcmSize[1];
3432 Double_t mcmWidth = mcmSize[2];
3436 TGeoVolumeAssembly *bus = CreatePixelBus(isRight, layer, busSize, mgr);
3437 Double_t busThickness = busSize[0];
3438 Double_t busLength = busSize[1];
3439 Double_t busWidth = busSize[2];
3441 // glue between ladders and pixel bus
3442 TGeoMedium *medLadGlue = GetMedium("EPOXY$", mgr);
3443 Double_t ladGlueThickness = fgkmm * 0.1175 - fgkGapLadder;
3444 TGeoVolume *ladderGlue = mgr->MakeBox("ITSSPDladderGlue",medLadGlue,
3445 0.5*ladGlueThickness, 0.5*busWidth, 0.5*busLength);
3446 ladderGlue->SetLineColor(kYellow + 5);
3448 // create references for the whole object, as usual
3450 Double_t &fullThickness = sizes[0];
3451 Double_t &fullLength = sizes[1];
3452 Double_t &fullWidth = sizes[2];
3454 // compute the full size of the container
3455 fullLength = sepLadderCenter+2.0*ladderLength+sepLadderMCM+
3456 sepLadderLadder+mcmLength;
3457 fullWidth = ladderWidth;
3458 fullThickness = grndThickness + fgkGapLadder + mcmThickness + busThickness;
3459 //cout << "HSTAVE FULL THICKNESS = " << fullThickness << endl;
3463 // grounding foil (shifted only along thickness)
3464 Double_t xGrnd = -0.5*fullThickness + 0.5*grndThickness;
3465 Double_t zGrnd = -0.5*grndLength;
3466 if (!isRight) zGrnd = -zGrnd;
3467 TGeoTranslation *grndTrans = new TGeoTranslation(xGrnd, 0.0, zGrnd);
3469 // ladders (translations along thickness and length)
3470 // layers must be sorted going from the one at largest Z to the
3471 // one at smallest Z:
3472 // -|Zmax| ------> |Zmax|
3474 // then, for layer 1 ladders they must be placed exactly this way,
3475 // and in layer 2 at the opposite. In order to remember the placements,
3476 // we define as "inner" and "outer" ladder respectively the one close
3477 // to barrel center, and the one closer to MCM, respectively.
3478 Double_t xLad, zLadIn, zLadOut;
3479 xLad = xGrnd + 0.5*(grndThickness + ladderThickness) +
3480 0.01175 - fgkGapLadder;
3481 zLadIn = -sepLadderCenter - 0.5*ladderLength;
3482 zLadOut = zLadIn - sepLadderLadder - ladderLength;
3486 } // end if !isRight
3487 TGeoRotation *rotLad = new TGeoRotation(*gGeoIdentity);
3488 rotLad->RotateZ(90.0);
3489 rotLad->RotateY(180.0);
3490 Double_t sensWidth = fgkmm * 12.800;
3491 Double_t chipWidth = fgkmm * 15.950;
3492 Double_t guardRingWidth = fgkmm * 0.560;
3493 Double_t ladderShift = 0.5 * (chipWidth - sensWidth - 2.0*guardRingWidth);
3494 TGeoCombiTrans *trLadIn = new TGeoCombiTrans(xLad,ladderShift,zLadIn,
3496 TGeoCombiTrans *trLadOut = new TGeoCombiTrans(xLad,ladderShift,zLadOut,
3499 // MCM (length and thickness direction, placing at same level as the
3500 // ladder, which implies to recompute the position of center, because
3501 // ladder and MCM have NOT the same thickness) the two copies of the
3502 // MCM are placed at the same distance from the center, on both sides
3503 Double_t xMCM = xGrnd + 0.5*grndThickness + 0.5*mcmThickness +
3504 0.01175 - fgkGapLadder;
3505 Double_t yMCM = 0.5*(fullWidth - mcmWidth);
3506 Double_t zMCM = zLadOut - 0.5*ladderLength - 0.5*mcmLength - sepLadderMCM;
3507 if (!isRight) zMCM = zLadOut + 0.5*ladderLength + 0.5*mcmLength +
3510 // create the correction rotations
3511 TGeoRotation *rotMCM = new TGeoRotation(*gGeoIdentity);
3512 rotMCM->RotateY(90.0);
3513 TGeoCombiTrans *trMCM = new TGeoCombiTrans(xMCM, yMCM, zMCM, rotMCM);
3515 // glue between ladders and pixel bus
3516 Double_t xLadGlue = xLad + 0.5*ladderThickness + 0.01175 -
3517 fgkGapLadder + 0.5*ladGlueThickness;
3519 // bus (length and thickness direction)
3520 Double_t xBus = xLadGlue + 0.5*ladGlueThickness + 0.5*busThickness;
3521 Double_t yBus = 0.5*(fullWidth - busWidth) + 0.075; // Hardcode fix of a small overlap
3522 Double_t zBus = -0.5*busLength - sepBusCenter;
3523 if (!isRight) zBus = -zBus;
3524 TGeoTranslation *trBus = new TGeoTranslation(xBus, yBus, zBus);
3526 TGeoTranslation *trLadGlue = new TGeoTranslation(xLadGlue, 0.0, zBus);
3528 // create the container
3529 TGeoVolumeAssembly *container = 0;
3530 if (idxCentral+idxSide==5) {
3531 container = new TGeoVolumeAssembly("ITSSPDhalf-Stave1");
3533 container = new TGeoVolumeAssembly("ITSSPDhalf-Stave0");
3536 // add to container all objects
3537 container->AddNode(grndVol, 1, grndTrans);
3538 // ladders are inserted in different order to respect numbering scheme
3539 // which is inverted when going from outer to inner layer
3540 container->AddNode(ladder, idxCentral+1, trLadIn);
3541 container->AddNode(ladder, idxSide+1, trLadOut);
3542 container->AddNode(ladderGlue, 1, trLadGlue);
3543 container->AddNode(mcm, 1, trMCM);
3544 container->AddNode(bus, 1, trBus);
3546 // since the clips are placed in correspondence of two pt1000s,
3547 // their position is computed here, but they are not added by default
3548 // it will be the StavesInSector method which will decide to add them
3549 // anyway, to recovery some size informations on the clip, it must be
3552 // TGeoVolume *clipDummy = CreateClip(clipSize, kTRUE, mgr);
3553 CreateClip(clipSize, kTRUE, mgr);
3554 // define clip movements (width direction)
3555 sizes[3] = xBus + 0.5*busThickness;
3556 sizes[4] = 0.5 * (fullWidth - busWidth) - clipSize[6] - fgkmm*0.48;
3557 sizes[5] = zBus + busSize[4];
3558 sizes[6] = zBus + busSize[5];
3562 //______________________________________________________________________
3563 TGeoVolumeAssembly* AliITSv11GeometrySPD::CreateStave(Int_t layer,
3564 TArrayD &sizes, TGeoManager *mgr)
3567 // This method uses all other ones which create pieces of the stave
3568 // and assemblies everything together, in order to return the whole
3569 // stave implementation, which is returned as a TGeoVolumeAssembly,
3570 // due to the presence of some parts which could generate fake overlaps
3571 // when put on the sector.
3572 // This assembly contains, going from bottom to top in the thickness
3574 // - the complete grounding foil, defined by the "CreateGroundingFoil"
3575 // method which already joins some glue and real groudning foil
3576 // layers for the whole stave (left + right);
3577 // - 4 ladders, which are sorted according to the ALICE numbering
3578 // scheme, which depends on the layer we are building this stave for;
3579 // - 2 MCMs (a left and a right one);
3580 // - 2 pixel buses (a left and a right one);
3583 // - the layer number, which determines the displacement and naming
3584 // of sensitive volumes
3585 // - a TArrayD passed by reference which will contain the size
3586 // of virtual box containing the stave
3587 // - the TGeoManager
3590 // create the container
3591 TGeoVolumeAssembly *container = new TGeoVolumeAssembly(Form(
3592 "ITSSPDlay%d-Stave",layer));
3593 // define the indexes of the ladders in order to have the correct order
3594 // keeping in mind that the staves will be inserted as they are on layer
3595 // 2, while they are rotated around their local Y axis when inserted
3596 // on layer 1, so in this case they must be put in the "wrong" order
3597 // to turn out to be right at the end. The convention is:
3598 // -|Zmax| ------> |Zmax|
3600 // with respect to the "native" stave reference frame, "left" is in
3601 // the positive Z this leads the definition of these indexes:
3602 Int_t idxCentralL, idxSideL, idxCentralR, idxSideR;
3614 } // end if layer ==1
3616 // create the two half-staves
3617 TArrayD sizeL, sizeR;
3618 TGeoVolumeAssembly *hstaveL = CreateHalfStave(kFALSE, layer, idxCentralL,
3619 idxSideL, sizeL,mgr);
3620 TGeoVolumeAssembly *hstaveR = CreateHalfStave(kTRUE, layer, idxCentralR,
3621 idxSideR, sizeR, mgr);
3622 // copy the size to the stave's one
3624 sizes[0] = sizeL[0];
3625 sizes[1] = sizeR[1] + sizeL[1];
3626 sizes[2] = sizeL[2];
3627 sizes[3] = sizeL[3];
3628 sizes[4] = sizeL[4];
3629 sizes[5] = sizeL[5];
3630 sizes[6] = sizeL[6];
3631 sizes[7] = sizeR[5];
3632 sizes[8] = sizeR[6];
3634 // add to container all objects
3635 container->AddNode(hstaveL, 1);
3636 container->AddNode(hstaveR, 1);
3640 //______________________________________________________________________
3641 void AliITSv11GeometrySPD::SetAddStave(Bool_t *mask)
3644 // Define a mask which states qhich staves must be placed.
3645 // It is a string which must contain '0' or '1' depending if
3646 // a stave must be placed or not.
3647 // Each place is referred to one of the staves, so the first
3648 // six characters of the string will be checked.
3652 for (i = 0; i < 6; i++) fAddStave[i] = mask[i];
3654 //______________________________________________________________________
3655 void AliITSv11GeometrySPD::StavesInSector(TGeoVolume *moth, TGeoManager *mgr)
3658 // Unification of essentially two methods:
3659 // - the one which creates the sector structure
3660 // - the one which returns the complete stave
3662 // For compatibility, this method requires the same arguments
3663 // asked by "CarbonFiberSector" method, which is recalled here.
3664 // Like this cited method, this one does not return any value,
3665 // but it inserts in the mother volume (argument 'moth') all the stuff
3666 // which composes the complete SPD sector.
3668 // In the following, the stave numbering order used for arrays is the
3669 // same as defined in the GetSectorMountingPoints():
3675 // Arguments: see description of "CarbonFiberSector" method.
3678 Double_t shift[6]; // shift from the innermost position in the
3679 // sector placement plane (where the stave
3680 // edge is in the point where the rounded
3683 shift[0] = fgkmm * -0.691;
3684 shift[1] = fgkmm * 5.041;
3685 shift[2] = fgkmm * 1.816;
3686 shift[3] = fgkmm * -0.610;
3687 shift[4] = fgkmm * -0.610;
3688 shift[5] = fgkmm * -0.610;
3690 // corrections after interaction with Andrea and CAD
3691 Double_t corrX[6] = {0.0, 0.0, 0.0, 0.0, 0.0, 0.0};
3692 Double_t corrY[6] = {0.0, 0.0, 0.0, 0.0, 0.0, 0.0};
3696 corrX[2] = corrX[3] = corrX[4] = corrX[5] = -0.0016;
3700 corrY[2] = corrY[3] = corrY[4] = corrY[5] = -0.0003;
3702 corrX[0] += 0.00026;
3703 corrY[0] += -0.00080;
3705 corrX[1] += 0.00018;
3706 corrY[1] += -0.00086;
3708 corrX[2] += 0.00020;
3709 corrY[2] += -0.00062;
3711 corrX[3] += 0.00017;
3712 corrY[3] += -0.00076;
3714 corrX[4] += 0.00016;
3715 corrY[4] += -0.00096;
3717 corrX[5] += 0.00018;
3718 corrY[5] += -0.00107;
3720 // create stave volumes (different for layer 1 and 2)
3721 TArrayD staveSizes1(9), staveSizes2(9), clipSize(5);
3722 Double_t &staveHeight = staveSizes1[2], &staveThickness = staveSizes1[0];
3723 TGeoVolume *stave1 = CreateStave(1, staveSizes1, mgr);
3724 TGeoVolume *stave2 = CreateStave(2, staveSizes2, mgr);
3725 TGeoVolume *clip = CreateClip(clipSize, kFALSE, mgr);
3727 Double_t xL, yL; // leftmost edge of mounting point (XY projection)
3728 Double_t xR, yR; // rightmost edge of mounting point (XY projection)
3729 Double_t xM, yM; // middle point of the segment L-R
3730 Double_t dx, dy; // (xL - xR) and (yL - yR)
3731 Double_t widthLR; // width of the segment L-R
3732 Double_t angle; // stave rotation angle in degrees
3733 Double_t diffWidth; // difference between mounting plane width and
3734 // stave width (smaller)
3735 Double_t xPos, yPos; // final translation of the stave
3736 Double_t parMovement; // translation in the LR plane direction
3738 staveThickness += fgkGapHalfStave;
3742 for (i = 0; i < 6; i++) {
3743 // in debug mode, if this stave is not required, it is skipped
3744 if (!fAddStave[i]) continue;
3745 // retrieve reference points
3746 GetSectorMountingPoints(i, xL, yL, xR, yR);
3747 xM = 0.5 * (xL + xR);
3748 yM = 0.5 * (yL + yR);
3751 angle = TMath::ATan2(dy, dx);
3752 widthLR = TMath::Sqrt(dx*dx + dy*dy);
3753 diffWidth = 0.5*(widthLR - staveHeight);
3754 // first, a movement along this plane must be done
3755 // by an amount equal to the width difference
3756 // and then the fixed shift must also be added
3757 parMovement = diffWidth + shift[i];
3758 // due to stave thickness, another movement must be done
3759 // in the direction normal to the mounting plane
3760 // which is computed using an internal method, in a reference
3761 // frame where the LR segment has its middle point in the origin
3762 // and axes parallel to the master reference frame
3764 ParallelPosition(-0.5*staveThickness, -parMovement, angle,
3768 ParallelPosition( 0.5*staveThickness, -parMovement, angle,
3771 ParallelPosition( 0.5*staveThickness, parMovement, angle,
3774 // then we go into the true reference frame
3779 // using the parameters found here, compute the
3780 // translation and rotation of this stave:
3781 TGeoRotation *rot = new TGeoRotation(*gGeoIdentity);
3782 if (i == 0 || i == 1) rot->RotateX(180.0);
3783 rot->RotateZ(90.0 + angle * TMath::RadToDeg());
3784 TGeoCombiTrans *trans = new TGeoCombiTrans(xPos, yPos, 0.0, rot);
3785 if (i == 0 || i == 1) {
3786 moth->AddNode(stave1, i+1, trans);
3788 moth->AddNode(stave2, i - 1, trans);
3790 // except in the case of stave #2,
3791 // clips must be added, and this is done directly on the sector
3794 TGeoRotation *rotClip = new TGeoRotation(*gGeoIdentity);
3795 rotClip->RotateZ(-90.0);
3796 rotClip->RotateX(180.0);
3797 Double_t x = staveSizes2[3] + fgkGapHalfStave;
3798 Double_t y = staveSizes2[4];
3799 Double_t z[4] = { staveSizes2[5], staveSizes2[6],
3800 staveSizes2[7], staveSizes2[8] };
3801 for (j = 0; j < 4; j++) {
3802 TGeoCombiTrans *trClip = new TGeoCombiTrans(x, y, z[j],
3804 *trClip = *trans * *trClip;
3805 moth->AddNode(clip, iclip++, trClip);
3808 } // end if i==0||i==1 else
3811 //______________________________________________________________________
3812 void AliITSv11GeometrySPD::ParallelPosition(Double_t dist1, Double_t dist2,
3813 Double_t phi, Double_t &x, Double_t &y) const
3816 // Performs the following steps:
3817 // 1 - finds a straight line parallel to the one passing through
3818 // the origin and with angle 'phi' with X axis(phi in RADIANS);
3819 // 2 - finds another line parallel to the previous one, with a
3820 // distance 'dist1' from it
3821 // 3 - takes a reference point in the second line in the intersection
3822 // between the normal to both lines passing through the origin
3823 // 4 - finds a point whith has distance 'dist2' from this reference,
3824 // in the second line (point 2)
3826 // According to the signs given to dist1 and dist2, the point is
3827 // found in different position w.r. to the origin
3828 // compute the point
3830 Double_t cs = TMath::Cos(phi);
3831 Double_t sn = TMath::Sin(phi);
3833 x = dist2*cs - dist1*sn;
3834 y = dist1*cs + dist2*sn;
3836 //______________________________________________________________________
3837 Double_t AliITSv11GeometrySPD::GetSPDSectorTranslation(
3838 Double_t x0,Double_t y0,Double_t x1,Double_t y1,Double_t r) const
3841 // Comutes the radial translation of a sector to give the
3842 // proper distance between SPD detectors and the beam pipe.
3843 // Units in are units out.
3848 <A HREF="http://www.physics.ohio-state.edu/HIRG/SoftWareDoc/SPD_Sector_Position.png">
3849 Figure showing the geometry used in the computation below. </A>
3854 // Double_t x0 Point x0 on Sector surface for the inner
3855 // most detector mounting
3856 // Double_t y0 Point y0 on Sector surface for the innor
3857 // most detector mounting
3858 // Double_t x1 Point x1 on Sector surface for the inner
3859 // most detector mounting
3860 // Double_t y1 Point y1 on Sector surface for the innor
3861 // most detector mounting
3862 // Double_t r The radial distance this mounting surface
3863 // should be from the center of the beam pipe.
3867 // The distance the SPD sector should be displaced radialy.
3872 if(a==0.0) return 0.0;
3874 b = TMath::Sqrt(1.0+a*a);
3878 //______________________________________________________________________
3879 void AliITSv11GeometrySPD::CreateFigure0(const Char_t *filepath,
3881 TGeoManager *mgr) const
3884 // Creates Figure 0 for the documentation of this class. In this
3885 // specific case, it creates the X,Y cross section of the SPD suport
3886 // section, center and ends. The output is written to a standard
3887 // file name to the path specificed.
3889 // const Char_t *filepath Path where the figure is to be drawn
3890 // const Char_t *type The type of file, default is gif.
3891 // TGeoManager *mgr The TGeoManager default gGeoManager
3897 TGeoXtru *sA0,*sA1,*sB0,*sB1;
3898 //TPolyMarker *pmA,*pmB;
3899 TPolyLine plA0,plA1,plB0,plB1;
3902 Double_t x=0.0,y=0.0;
3905 if(strcmp(filepath,"")){
3906 Error("CreateFigure0","filepath=%s type=%s",filepath,type);
3909 sA0 = (TGeoXtru*) mgr->GetVolume("ITSSPDCarbonFiberSupportSectorA0_1")->
3911 sA1 = (TGeoXtru*) mgr->GetVolume("ITSSPDCarbonFiberSupportSectorAirA1_1")->
3913 sB0 = (TGeoXtru*) mgr->GetVolume("ITSSPDCarbonFiberSupportSectorEndB0_1")->
3915 sB1 = (TGeoXtru*) mgr->GetVolume("ITSSPDCarbonFiberSupportSectorEndAirB1_1"
3917 //pmA = new TPolyMarker();
3918 //pmA.SetMarkerStyle(2); // +
3919 //pmA.SetMarkerColor(7); // light blue
3920 //pmB = new TPolyMarker();
3921 //pmB.SetMarkerStyle(5); // X
3922 //pmB.SetMarkerColor(6); // purple
3923 plA0.SetPolyLine(sA0->GetNvert());
3924 plA0.SetLineColor(1); // black
3925 plA0.SetLineStyle(1);
3926 plA1.SetPolyLine(sA1->GetNvert());
3927 plA1.SetLineColor(2); // red
3928 plA1.SetLineStyle(1);
3929 plB0.SetPolyLine(sB0->GetNvert());
3930 plB0.SetLineColor(3); // Green
3931 plB0.SetLineStyle(2);
3932 plB1.SetPolyLine(sB1->GetNvert());
3933 plB1.SetLineColor(4); // Blue
3934 plB1.SetLineStyle(2);
3935 //for(i=0;i<kNRadii;i++) pmA.SetPoint(i,xyB1p[i][0],xyB1p[i][1]);
3936 //for(i=0;i<kNRadii;i++) pmB.SetPoint(i,xyB1p[i][0],xyB1p[i][1]);
3937 for(i=0;i<sA0->GetNvert();i++) plA0.SetPoint(i,sA0->GetX(i),sA0->GetY(i));
3938 for(i=0;i<sA1->GetNvert();i++) plA1.SetPoint(i,sA1->GetX(i),sA1->GetY(i));
3939 for(i=0;i<sB0->GetNvert();i++) plB0.SetPoint(i,sB0->GetX(i),sB0->GetY(i));
3940 for(i=0;i<sB1->GetNvert();i++) plB1.SetPoint(i,sB1->GetX(i),sB1->GetY(i));
3941 canvas = new TCanvas("AliITSv11GeometrySPDFig0","",1000,1000);
3942 canvas->Range(-3.,-3.,3.,3.);
3943 txt.SetTextSize(0.05);
3944 txt.SetTextAlign(33);
3945 txt.SetTextColor(1);
3946 txt.DrawLatex(2.9,2.9,"Section A-A outer Carbon Fiber surface");
3947 txt.SetTextColor(2);
3948 txt.DrawLatex(2.9,2.5,"Section A-A Inner Carbon Fiber surface");
3949 txt.SetTextColor(3);
3950 txt.DrawLatex(2.9,2.1,"Section E-E outer Carbon Fiber surface");
3951 txt.SetTextColor(4);
3952 txt.DrawLatex(2.9,1.7,"Section E-E Inner Carbon Fiber surface");
3963 for(i=0;i<kNRadii;i++){
3964 sprintf(chr,"%2d",i);txt.DrawLatex(x-0.1,y,chr);
3965 sprintf(chr,"%8.4f",5.000);txt.DrawLatex(x,y,chr);
3966 sprintf(chr,"%8.4f",5.000);txt.DrawLatex(x+0.5,y,chr);
3967 sprintf(chr,"%8.4f",5.000);txt.DrawLatex(x+1.0,y,chr);
3968 sprintf(chr,"%8.4f",5.000);txt.DrawLatex(x+1.5,y,chr);
3969 sprintf(chr,"%8.4f",5.000);txt.DrawLatex(x+2.0,y,chr);
3970 if(kTRUE) txt.DrawLatex(x+2.5,y,"A-A/E-E");
3971 else txt.DrawLatex(x+2.5,y,"E-E");
3973 txt.DrawLatex(x,y,"x_{c} mm");
3974 txt.DrawLatex(x+0.5,y,"y_{c} mm");
3975 txt.DrawLatex(x+1.0,y,"R mm");
3976 txt.DrawLatex(x+1.5,y,"#theta_{start}^{#circle}");
3977 txt.DrawLatex(x+2.0,y,"#theta_{end}^{#circle}");
3978 txt.DrawLatex(x+2.5,y,"Section");
3981 //______________________________________________________________________
3982 void AliITSv11GeometrySPD::PrintAscii(ostream *os) const
3985 // Print out class data values in Ascii Form to output stream
3987 // ostream *os Output stream where Ascii data is to be writen
3994 #if defined __GNUC__
3996 ios::fmtflags fmt = cout.flags();
4001 #if defined __ICC || defined __ECC || defined __xlC__
4008 *os<< fgkGapLadder <<" "<< fgkGapHalfStave<<" "<< 6 <<" ";
4009 for(i=0;i<6;i++) *os<< fAddStave[i] <<" "<<fSPDsectorX0.GetSize();
4010 for(i=0;i<fSPDsectorX0.GetSize();i++) *os<< fSPDsectorX0.GetAt(i) << " ";
4011 for(i=0;i<fSPDsectorX0.GetSize();i++) *os<< fSPDsectorY0.GetAt(i) << " ";
4012 for(i=0;i<fSPDsectorX1.GetSize();i++) *os<< fSPDsectorX1.GetAt(i) << " ";
4013 for(i=0;i<fSPDsectorX1.GetSize();i++) *os<< fSPDsectorY1.GetAt(i) << " ";
4014 *os<<10<<" "<< 2 <<" " << 6 << " "<< 3 <<" ";
4015 for(k=0;k<10;k++)for(i=0;i<6;i++)for(j=0;j<3;j++)
4016 *os<<fTubeEndSector[k][0][i][j]<<" ";
4017 for(k=0;k<10;k++)for(i=0;i<6;i++)for(j=0;j<3;j++)
4018 *os<<fTubeEndSector[k][1][i][j]<<" ";
4019 os->flags(fmt); // reset back to old Formating.
4023 //______________________________________________________________________
4024 void AliITSv11GeometrySPD::ReadAscii(istream* is)
4027 // Read in class data values in Ascii Form to output stream
4029 // istream *is Input stream where Ascii data is to be read in from
4036 Double_t gapLadder,GapHalfStave;
4038 *is>>gapLadder>>GapHalfStave>>n;
4040 Warning("ReadAscii","fAddStave Array !=6 n=%d",n);
4043 for(i=0;i<n;i++) *is>>fAddStave[i];
4045 fSPDsectorX0.Set(n);
4046 fSPDsectorY0.Set(n);
4047 fSPDsectorX1.Set(n);
4048 fSPDsectorY1.Set(n);
4049 for(i=0;i<n;i++) *is>>fSPDsectorX0[i];
4050 for(i=0;i<n;i++) *is>>fSPDsectorY0[i];
4051 for(i=0;i<n;i++) *is>>fSPDsectorX1[i];
4052 for(i=0;i<n;i++) *is>>fSPDsectorY1[i];
4054 if(i!=2||j!=6||n!=3){
4055 Warning("ReadAscii","fTubeEndSector array wrong size [2][6][3],"
4056 "found [%d][%d][%d]",i,j,n);
4059 for(k=0;k<10;k++)for(i=0;i<6;i++)for(j=0;j<3;j++)
4060 *is>>fTubeEndSector[k][0][i][j];
4061 for(k=0;k<10;k++)for(i=0;i<6;i++)for(j=0;j<3;j++)
4062 *is>>fTubeEndSector[k][1][i][j];
4066 //______________________________________________________________________
4067 ostream &operator<<(ostream &os,const AliITSv11GeometrySPD &s)
4070 // Standard output streaming function
4072 // ostream &os output steam
4073 // AliITSvPPRasymmFMD &s class to be streamed.
4077 // ostream &os The stream pointer
4083 //______________________________________________________________________
4084 istream &operator>>(istream &is,AliITSv11GeometrySPD &s)
4087 // Standard inputput streaming function
4089 // istream &is input steam
4090 // AliITSvPPRasymmFMD &s class to be streamed.
4094 // ostream &os The stream pointer
4100 //______________________________________________________________________
4101 Bool_t AliITSv11GeometrySPD::Make2DCrossSections(TPolyLine &a0,TPolyLine &a1,
4102 TPolyLine &b0,TPolyLine &b1,TPolyMarker &p)const
4105 // Fill the objects with the points representing
4106 // a0 the outer carbon fiber SPD sector shape Cross Section A
4107 // a1 the inner carbon fiber SPD sector shape Cross Section A
4108 // b0 the outer carbon fiber SPD sector shape Cross Section B
4109 // b1 the inner carbon fiber SPD sector shape Cross Section B
4112 // TPolyLine &a0 The outer carbon fiber SPD sector shape
4113 // TPolyLine &a1 The Inner carbon fiber SPD sector shape
4114 // TPolyLine &b0 The outer carbon fiber SPD sector shape
4115 // TPolyLine &b1 The Inner carbon fiber SPD sector shape
4116 // TPolyMarker &p The points where the ladders are to be placed
4118 // TPolyLine &a0 The shape filled with the points
4119 // TPolyLine &a1 The shape filled with the points
4120 // TPolyLine &b0 The shape filled with the points
4121 // TPolyLine &b1 The shape filled with the points
4122 // TPolyMarker &p The filled array of points
4128 TGeoVolume *a0V,*a1V,*b0V,*b1V;
4129 TGeoXtru *a0S,*a1S,*b0S,*b1S;
4130 TGeoManager *mgr = gGeoManager;
4132 a0V = mgr->GetVolume("ITS SPD Carbon fiber support Sector A0");
4133 a0S = dynamic_cast<TGeoXtru*>(a0V->GetShape());
4134 n0 = a0S->GetNvert();
4135 a0.SetPolyLine(n0+1);
4136 //for(i=0;i<fSPDsectorPoints0.GetSize();i++)
4137 // printf("%d %d %d\n",i,fSPDsectorPoints0[i],fSPDsectorPoints1[i]);
4141 //printf("%d %g %g\n",i,x,y);
4143 if(i==0) a0.SetPoint(n0,x,y);
4145 a1V = mgr->GetVolume("ITSSPDCarbonFiberSupportSectorAirA1");
4146 a1S = dynamic_cast<TGeoXtru*>(a1V->GetShape());
4147 n1 = a1S->GetNvert();
4148 a1.SetPolyLine(n1+1);
4153 if(i==0) a1.SetPoint(n1,x,y);
4156 b0V = mgr->GetVolume("ITSSPDCarbonFiberSupportSectorEndB0");
4157 b0S = dynamic_cast<TGeoXtru*>(b0V->GetShape());
4158 n0 = b0S->GetNvert();
4159 b0.SetPolyLine(n0+1);
4164 if(i==0) b0.SetPoint(n0,x,y);
4166 b1V = mgr->GetVolume("ITSSPDCarbonFiberSupportSectorEndAirB1");
4167 b1S = dynamic_cast<TGeoXtru*>(b1V->GetShape());
4168 n1 = b1S->GetNvert();
4169 b1.SetPolyLine(n1+1);
4174 if(i==0) b1.SetPoint(n1,x,y);
4177 Double_t x0,y0,x1,y1;
4178 p.SetPolyMarker(2*fSPDsectorX0.GetSize());
4179 for(i=0;i<fSPDsectorX0.GetSize();i++){
4180 GetSectorMountingPoints(i,x0,y0,x1,y1);
4181 p.SetPoint(2*i,x0,y0);
4182 p.SetPoint(2*i+1,x1,y1);
git://git.uio.no / u / mrichter / AliRoot.git / blob