MUON/AliMUONSlatGeometryBuilder.cxx

   1 /**************************************************************************
   2  * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
   3  *                                                                        *
   4  * Author: The ALICE Off-line Project.                                    *
   5  * Contributors are mentioned in the code where appropriate.              *
   6  *                                                                        *
   7  * Permission to use, copy, modify and distribute this software and its   *
   8  * documentation strictly for non-commercial purposes is hereby granted   *
   9  * without fee, provided that the above copyright notice appears in all   *
  10  * copies and that both the copyright notice and this permission notice   *
  11  * appear in the supporting documentation. The authors make no claims     *
  12  * about the suitability of this software for any purpose. It is          *
  13  * provided "as is" without express or implied warranty.                  *
  14  **************************************************************************/
  15
  16 // $Id$
  17 //
  18
  19 //-----------------------------------------------------------------------------
  20 /// \class AliMUONSlatGeometryBuilder
  21 /// This Builder is designed according to the enveloppe methode. The basic idea is to be able to allow moves
  22 /// of the slats on the support panels.
  23 /// Those moves can be described with a simple set of parameters. The next step should be now to describe all
  24 /// the slats and their places by a unique
  25 /// class, which would make the SlatBuilder far more compact since now only three parameters can define a slat
  26 /// and its position, like:
  27 ///   - Bool_t rounded_shape_slat
  28 ///   - Float_t slat_length
  29 ///   - Float_t slat_number or Float_t slat_position
  30 /// Reference system is the one described in the note ALICE-INT-2003-038  v.2  EDMS Id 406391
  31 ///
  32 /// \author Eric Dumonteil (dumontei@cea.fr)
  33 //-----------------------------------------------------------------------------
  34
  35 #include "AliMUONSlatGeometryBuilder.h"
  36 #include "AliMUON.h"
  37 #include "AliMUONConstants.h"
  38 #include "AliMUONGeometryModule.h"
  39 #include "AliMUONGeometryEnvelopeStore.h"
  40 #include "AliMUONConstants.h"
  41
  42 #include "AliMpDEManager.h"
  43
  44 #include "AliRun.h"
  45 #include "AliLog.h"
  46
  47 #include <TVirtualMC.h>
  48 #include <TGeoBBox.h>
  49 #include <TGeoVolume.h>
  50 #include <TGeoManager.h>
  51 #include <TGeoMatrix.h>
  52 #include <TGeoCompositeShape.h>
  53 #include <TGeoTube.h>
  54 #include <Riostream.h>
  55
  56 /// \cond CLASSIMP
  57 ClassImp(AliMUONSlatGeometryBuilder)
  58 /// \endcond
  59
  60 //______________________________________________________________________________
  61 AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder(AliMUON* muon)
  62  : AliMUONVGeometryBuilder(4, 12),
  63    fMUON(muon)
  64 {
  65 /// Standard constructor
  66
  67 }
  68
  69 //______________________________________________________________________________
  70 AliMUONSlatGeometryBuilder::AliMUONSlatGeometryBuilder()
  71  : AliMUONVGeometryBuilder(),
  72    fMUON(0)
  73 {
  74 /// Default constructor
  75 }
  76
  77 //______________________________________________________________________________
  78 AliMUONSlatGeometryBuilder::~AliMUONSlatGeometryBuilder()
  79 {
  80 /// Destructor
  81 }
  82
  83 //
  84 // public methods
  85 //
  86
  87 //______________________________________________________________________________
  88 void AliMUONSlatGeometryBuilder::CreateGeometry()
  89 {
  90   /// CreateGeometry is the method containing all the informations concerning Stations 345 geometry.
  91   /// It includes description and placements of support panels and slats.
  92   /// The code comes directly from what was written in AliMUONv1.cxx before, with modifications concerning
  93   /// the use of Enveloppe method to place the Geant volumes.
  94   /// Now, few changes would allow the creation of a Slat methode where slat could be described by few parameters,
  95   /// and this builder would then be dedicated only to the
  96   /// placements of the slats. Those modifications could shorten the Station 345 geometry by a non-negligeable factor...
  97
  98   Int_t *idtmed = fMUON->GetIdtmed()->GetArray()-1099;
  99
 100   Float_t angle;
 101   Float_t *dum=0;
 102
 103   // define the id of tracking media:
 104   //  Int_t idAir    = idtmed[1100]; // medium 1
 105   Int_t idGas    = idtmed[1108]; // medium 9 = Ar-CO2 gas (80%+20%)
 106   Int_t idCopper = idtmed[1110];
 107   Int_t idG10    = idtmed[1111];
 108   Int_t idCarbon = idtmed[1112];
 109   Int_t idRoha   = idtmed[1113];
 110   Int_t idNomex  = idtmed[1114]; // honey comb
 111   Int_t idNoryl  = idtmed[1115];
 112   Int_t idNomexB = idtmed[1116]; // bulk material
 113
 114   // Getting mediums for pannel support geometry
 115   TGeoMedium* kMedNomex     = gGeoManager->GetMedium("MUON_Nomex");
 116   TGeoMedium* kMedCarbon    = gGeoManager->GetMedium("MUON_CARBON");
 117
 118   // sensitive area: 40*40 cm**2
 119   const Float_t kSensLength = 40.;
 120   const Float_t kSensHeight = 40.;
 121   const Float_t kSensWidth  = AliMUONConstants::Pitch()*2;// 0.5 cm, according to TDR fig 2.120
 122   const Int_t kSensMaterial = idGas;
 123   //     const Float_t kYoverlap   = 1.5;
 124
 125   // PCB dimensions in cm; width: 30 mum copper
 126   const Float_t kPcbLength  = kSensLength;
 127   const Float_t kPcbHeight  = 58.; // updated Ch. Finck
 128   const Float_t kPcbWidth   = 0.003;
 129   const Int_t kPcbMaterial  = idCopper;
 130
 131   // Insulating material: 220 mum G10 fiber  glued to pcb
 132   const Float_t kInsuLength = kPcbLength;
 133   const Float_t kInsuHeight = kPcbHeight;
 134   const Float_t kInsuWidth  = 0.022;  // updated Ch. Finck
 135   const Int_t kInsuMaterial = idG10;
 136
 137   // Carbon fiber panels: 200mum carbon/epoxy skin
 138   const Float_t kCarbonWidth  = 0.020;
 139   const Int_t kCarbonMaterial = idCarbon;
 140
 141   // Nomex (honey comb) between the two panel carbon skins
 142   const Float_t kNomexLength = kSensLength;
 143   const Float_t kNomexHeight = kSensHeight;
 144   const Float_t kNomexWidth  = 0.8; // updated Ch. Finck
 145   const Int_t kNomexMaterial = idNomex;
 146
 147   // Bulk Nomex under panel sandwich Ch. Finck
 148   const Float_t kNomexBWidth  = 0.025;
 149   const Int_t kNomexBMaterial = idNomexB;
 150
 151   // Panel sandwich 0.02 carbon*2 + 0.8 nomex
 152   const Float_t kPanelLength = kSensLength;
 153   const Float_t kPanelHeight = kSensHeight;
 154   const Float_t kPanelWidth  = 2 * kCarbonWidth + kNomexWidth;
 155
 156   // Frame along the rounded (spacers) slats
 157   const Float_t kRframeHeight = 2.00;
 158
 159   // spacer around the slat: 2 sticks along length,2 along height
 160   // H: the horizontal ones
 161   const Float_t kHframeLength = kPcbLength;
 162   const Float_t kHframeHeight = 1.95; // updated Ch. Finck
 163   const Float_t kHframeWidth  = kSensWidth;
 164   const Int_t kHframeMaterial = idNoryl;
 165
 166   // V: the vertical ones; vertical spacers
 167   const Float_t kVframeLength = 2.5;
 168   const Float_t kVframeHeight = kSensHeight + kHframeHeight;
 169   const Float_t kVframeWidth  = kSensWidth;
 170   const Int_t kVframeMaterial = idNoryl;
 171
 172   // R: rounded part of vertical spacers
 173   const Float_t kRframeLength = 2.0;
 174   const Float_t kRframeWidth  = kSensWidth;
 175   const Int_t kRframeMaterial = idNoryl;
 176
 177   // B: the horizontal border filled with rohacell: ok Ch. Finck
 178   const Float_t kBframeLength = kHframeLength;
 179   const Float_t kBframeHeight = (kPcbHeight - kSensHeight)/2. - kHframeHeight;
 180   const Float_t kBframeWidth  = kHframeWidth;
 181   const Int_t kBframeMaterial = idRoha;
 182
 183   // NULOC: 30 mum copper + 200 mum vetronite (same radiation length as 14mum copper) for electronics
 184   const Float_t kNulocLength   = 2.5;
 185   const Float_t kNulocHeight   = kBframeHeight;
 186   const Float_t kNulocWidth    = 0.0030 + 0.0014; // equivalent copper width of vetronite;
 187   const Int_t   kNulocMaterial = idCopper;
 188
 189   // Readout cables: Equivalent to 260 mum copper
 190   const Float_t kCableHeight = 2.6;
 191   const Float_t kCableWidth  = 0.026;
 192   const Int_t kCableMaterial = idCopper;
 193
 194   // Slat parameters
 195   const Float_t kSlatHeight = kPcbHeight;
 196   const Float_t kSlatWidth  = kSensWidth + 2.*(kPcbWidth + kInsuWidth + kPanelWidth
 197                                                + kNomexBWidth); //replaced rohacell with Nomex Ch. Finck
 198   // const Int_t   kSlatMaterial = idAir;
 199   const Float_t kDslatLength  = -1.25; // position of the slat respect to the beam plane (half vertical spacer) Ch. Finck
 200   Float_t zSlat               = AliMUONConstants::DzSlat();// implemented Ch. Finck
 201   Float_t dzCh                = AliMUONConstants::DzCh();
 202
 203   Float_t spar[3];
 204   Int_t i, j;
 205   Int_t detElemId;
 206   Int_t moduleId;
 207
 208   // the panel volume contains the nomex
 209   Float_t panelpar[3] = { kPanelLength/2., kPanelHeight/2., kPanelWidth/2. };
 210   Float_t nomexpar[3] = { kNomexLength/2., kNomexHeight/2., kNomexWidth/2. };
 211   Float_t twidth =  kPanelWidth +  kNomexBWidth;
 212   Float_t nomexbpar[3] = {kNomexLength/2., kNomexHeight/2.,twidth/2. };// bulk nomex
 213
 214   // insulating material contains PCB-> gas
 215   twidth = 2*(kInsuWidth + kPcbWidth) + kSensWidth ;
 216   Float_t insupar[3] = {kInsuLength/2., kInsuHeight/2., twidth/2. };
 217   twidth -= 2 * kInsuWidth;
 218   Float_t pcbpar[3]  = {kPcbLength/2., kPcbHeight/2., twidth/2. };
 219   Float_t senspar[3] = {kSensLength/2., kSensHeight/2., kSensWidth/2. };
 220   Float_t theight    = 2 * kHframeHeight + kSensHeight;
 221   Float_t hFramepar[3] = {kHframeLength/2., theight/2., kHframeWidth/2.};
 222   Float_t bFramepar[3] = {kBframeLength/2., kBframeHeight/2., kBframeWidth/2.};
 223   Float_t vFramepar[3] = {kVframeLength/2., kVframeHeight/2., kVframeWidth/2.};
 224   Float_t nulocpar[3]  = {kNulocLength/2.,  kNulocHeight/2.,  kNulocWidth/2.};
 225
 226   Float_t xx;
 227   Float_t xxmax = (kBframeLength - kNulocLength)/2.;
 228   Int_t index=0;
 229   Int_t* fStations = new Int_t[5];
 230   for (Int_t iSt=0; iSt<5; iSt++) fStations[iSt] = 1;
 231   fStations[2] = 1;
 232
 233   if (fStations[2])
 234     {
 235       //********************************************************************
 236       //                            Station 3                             **
 237       //********************************************************************
 238       // Mother volume for each chamber in St3 is an envelop (or assembly)
 239       // There is one assembly mother per half a chamber
 240       // Mother volume for each chamber in St3 is an envelop (or assembly)
 241       // There is one assembly mother per half a chamber  called SC05I, SC05O, SC06I and SC06O
 242       // volumes for slat geometry (xx=5,..,10 chamber id):
 243       // Sxx0 Sxx1 Sxx2 Sxx3  -->   Slat Mother volumes
 244       // SxxG                          -->   Sensitive volume (gas)
 245       // SxxP                          -->   PCB (copper)
 246       // SxxI                          -->   Insulator (G10)
 247       // SxxC                          -->   Carbon panel
 248       // SxxN                          -->   Nomex comb
 249       // SxxX                          -->   Nomex bulk
 250       // SxxH, SxxV                    -->   Horizontal and Vertical frames (Noryl)
 251       // SB5x                          -->   Volumes for the 35 cm long PCB
 252       // slat dimensions: slat is a MOTHER volume!!! made of air
 253       // Only for chamber 5: slat 1 has a PCB shorter by 5cm!
 254
 255       Float_t tlength = 35.;
 256       Float_t panelpar2[3]  = { tlength/2., panelpar[1],  panelpar[2]};
 257       Float_t nomexpar2[3]  = { tlength/2., nomexpar[1],  nomexpar[2]};
 258       Float_t nomexbpar2[3] = { tlength/2., nomexbpar[1],  nomexbpar[2]};
 259       Float_t insupar2[3]   = { tlength/2., insupar[1],   insupar[2]};
 260       Float_t pcbpar2[3]    = { tlength/2., pcbpar[1],    pcbpar[2]};
 261       Float_t senspar2[3]   = { tlength/2., senspar[1],   senspar[2]};
 262       Float_t hFramepar2[3] = { tlength/2., hFramepar[1], hFramepar[2]};
 263       Float_t bFramepar2[3] = { tlength/2., bFramepar[1], bFramepar[2]};
 264       Float_t pcbDLength3   = (kPcbLength - tlength);
 265
 266       // For rounded pcb of central slat
 267       Float_t csvPcbLength = 59.25-40.; // PQ-LAT-SR1
 268       Float_t panelpar3[3]  = { csvPcbLength/2., panelpar[1],  panelpar[2]};
 269       Float_t nomexpar3[3]  = { csvPcbLength/2., nomexpar[1],  nomexpar[2]};
 270       Float_t nomexbpar3[3] = { csvPcbLength/2., nomexbpar[1],  nomexbpar[2]};
 271       Float_t insupar3[3]   = { csvPcbLength/2., insupar[1],   insupar[2]};
 272       Float_t pcbpar3[3]    = { csvPcbLength/2., pcbpar[1],    pcbpar[2]};
 273       Float_t senspar3[3]   = { csvPcbLength/2., senspar[1],   senspar[2]};
 274       Float_t hFramepar3[3] = { csvPcbLength/2., hFramepar[1], hFramepar[2]};
 275       Float_t bFramepar3[3] = { csvPcbLength/2., bFramepar[1], bFramepar[2]};
 276       Float_t cPhi = TMath::RadToDeg()*(TMath::Pi()/2.-TMath::ACos(hFramepar3[1]/(AliMUONConstants::Rmin(2)-kRframeLength)));
 277       Float_t cFramepar3[5] = { AliMUONConstants::Rmin(2)-kRframeLength, AliMUONConstants::Rmin(2), kRframeWidth, -cPhi, cPhi};
 278
 279       const Int_t   kNslats3         = 5;  // number of slats per quadrant
 280       const Int_t   kNPCB3[kNslats3] = {4, 4, 4, 3, 2}; // n PCB per slat
 281       const Float_t kXpos3[kNslats3] = {0., 0., 0., 0., 0.};//{31., 0., 0., 0., 0.};
 282       const Float_t kYpos3[kNslats3] = {0, 37.8, 37.7, 37.3, 33.7};
 283       Float_t slatLength3[kNslats3];
 284
 285       Float_t rPhi1 = TMath::RadToDeg()*(TMath::ASin((kYpos3[1]-hFramepar3[1])/(AliMUONConstants::Rmin(2))));
 286       Float_t rPhi2 = TMath::RadToDeg()*(TMath::ACos(-vFramepar[0]/(AliMUONConstants::Rmin(2)-kRframeLength)));
 287       Float_t rFramepar3[5] = { AliMUONConstants::Rmin(2)-kRframeLength, AliMUONConstants::Rmin(2), kRframeWidth, rPhi1, rPhi2};
 288       Float_t vrFrameHeight = hFramepar3[1]+kYpos3[1]-AliMUONConstants::Rmin(2)+kRframeLength;
 289
 290       // create and position the slat (mother) volumes
 291
 292       char idSlatCh5[6];
 293       char idSlatCh6[6];
 294       Float_t xSlat3;
 295       Float_t ySlat3 = 0;
 296       angle = 0.;
 297
 298       Float_t spar2[3];
 299       for (i = 0; i < kNslats3; i++){
 300
 301         slatLength3[i] = kPcbLength * kNPCB3[i] + 2.* kVframeLength;
 302         xSlat3 = slatLength3[i]/2. +  kDslatLength + kXpos3[i];
 303         ySlat3 += kYpos3[i];
 304
 305         spar[0] = slatLength3[i]/2.;
 306         spar[1] = kSlatHeight/2.;
 307         spar[2] = kSlatWidth/2.;
 308         // take away 5 cm from the first slat in chamber 5
 309         if (i == 0 || i == 1 || i == 2) { // 1 pcb is shortened by 5cm
 310           spar2[0] = spar[0] - pcbDLength3/2.;
 311         } else {
 312           spar2[0] = spar[0];
 313         }
 314         spar2[1] = spar[1];
 315         spar2[2] = spar[2];
 316         Float_t dzCh3 = dzCh;
 317         Float_t dzSlat3 = -0.25; // see drawing PQ7EN345-6 (Delta_slat=80mm instead 85mm)
 318         Float_t zSlat3 = (i%2 ==0)? -(zSlat+dzSlat3) : (zSlat+dzSlat3); // seems not that zSlat3 = zSlat4 & 5 refering to plan PQ7EN345-6 ? -> Indeed, fixed J.C.
 319
 320         sprintf(idSlatCh5,"SLA%d",i+kNslats3-1);
 321         detElemId = 509 - (i + kNslats3-1-4);
 322         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 323         if (detElemId % 2 == 0)
 324             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3),
 325                                                 TGeoRotation("rot1",90,angle,90,90+angle,0,0) );
 326         else
 327             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3),
 328                                                 TGeoRotation("rot1",90,angle,90,270+angle,180,0) );
 329
 330         sprintf(idSlatCh5,"SLA%d",3*kNslats3-2+i);
 331         detElemId = 500 + (i + kNslats3-1-4);
 332         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 333         if (detElemId % 2 == 0)
 334             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3),
 335                                                 TGeoRotation("rot2",90,180+angle,90,270+angle,0,0) );
 336         else
 337             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3),
 338                                                 TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) );
 339
 340         if (i > 0) {
 341           sprintf(idSlatCh5,"SLA%d",kNslats3-1-i);
 342           detElemId = 509 + (i + kNslats3-1-4);
 343           moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 344           if (detElemId % 2 == 0 && detElemId != 510)
 345               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3),
 346                                                   TGeoRotation("rot3",90,angle,90,90+angle,0,0) );
 347           else
 348               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3),
 349                                                   TGeoRotation("rot3",90,angle,90,270+angle,180,0) );
 350
 351           sprintf(idSlatCh5,"SLA%d",3*kNslats3-2-i);
 352           detElemId = 518 - (i + kNslats3-1-4);
 353           moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 354           if (detElemId % 2 == 1 && detElemId != 517)
 355               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3),
 356                                                   TGeoRotation("rot4",90,180+angle,90,90+angle,180,0) );
 357           else
 358               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh5, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3),
 359                                                   TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) );
 360         }
 361
 362         sprintf(idSlatCh6,"SLB%d",kNslats3-1+i);
 363         detElemId = 609 - (i  + kNslats3-1-4);
 364         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 365         if (detElemId % 2 == 0)
 366             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3),
 367                                      TGeoRotation("rot5",90,angle,90,90+angle,0,0) );
 368         else
 369             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, ySlat3, -zSlat3 + dzCh3),
 370                                      TGeoRotation("rot5",90,angle,90,270+angle,180,0) );
 371
 372         sprintf(idSlatCh6,"SLB%d",3*kNslats3-2+i);
 373         detElemId = 600 + (i + kNslats3-1-4);
 374         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 375         if (detElemId % 2 == 0)
 376             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3),
 377                                                 TGeoRotation("rot6",90,180+angle,90,270+angle,0,0) );
 378         else
 379             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, ySlat3, zSlat3 - dzCh3),
 380                                                 TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) );
 381
 382         if (i > 0) {
 383           sprintf(idSlatCh6,"SLB%d",kNslats3-1-i);
 384           detElemId = 609 + (i + kNslats3-1-4);
 385           moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 386           if (detElemId % 2 == 0 && detElemId != 610)
 387               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3),
 388                                                   TGeoRotation("rot7",90,angle,90,90+angle,0,0) );
 389           else
 390               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(xSlat3, -ySlat3, -zSlat3 + dzCh3),
 391                                                   TGeoRotation("rot7",90,angle,90,270+angle,180,0) );
 392           sprintf(idSlatCh6,"SLB%d",3*kNslats3-2-i);
 393           detElemId = 618 - (i + kNslats3-1-4);
 394           moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
 395           if (detElemId % 2 == 1 && detElemId != 617)
 396               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3),
 397                                                   TGeoRotation("rot8",90,180+angle,90,90+angle,180,0) );
 398           else
 399               GetEnvelopes(moduleId)->AddEnvelope(idSlatCh6, detElemId, true, TGeoTranslation(-xSlat3, -ySlat3, zSlat3 - dzCh3),
 400                                                   TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) );
 401         }
 402       }
 403
 404       // create the panel volume
 405
 406       gMC->Gsvolu("S05C","BOX",kCarbonMaterial,panelpar,3);
 407       gMC->Gsvolu("SB5C","BOX",kCarbonMaterial,panelpar2,3);
 408       gMC->Gsvolu("SC5C","BOX",kCarbonMaterial,panelpar3,3);
 409       gMC->Gsvolu("SD5C","BOX",kCarbonMaterial,panelpar,3);
 410       gMC->Gsvolu("S06C","BOX",kCarbonMaterial,panelpar,3);
 411       gMC->Gsvolu("SC6C","BOX",kCarbonMaterial,panelpar3,3);
 412       gMC->Gsvolu("SD6C","BOX",kCarbonMaterial,panelpar,3);
 413
 414       // create the nomex volume (honey comb)
 415
 416       gMC->Gsvolu("S05N","BOX",kNomexMaterial,nomexpar,3);
 417       gMC->Gsvolu("SB5N","BOX",kNomexMaterial,nomexpar2,3);
 418       gMC->Gsvolu("SC5N","BOX",kNomexMaterial,nomexpar3,3);
 419       gMC->Gsvolu("SD5N","BOX",kNomexMaterial,nomexpar,3);
 420       gMC->Gsvolu("S06N","BOX",kNomexMaterial,nomexpar,3);
 421       gMC->Gsvolu("SC6N","BOX",kNomexMaterial,nomexpar3,3);
 422       gMC->Gsvolu("SD6N","BOX",kNomexMaterial,nomexpar,3);
 423
 424       // create the nomex volume (bulk)
 425
 426       gMC->Gsvolu("S05X","BOX",kNomexBMaterial,nomexbpar,3);
 427       gMC->Gsvolu("SB5X","BOX",kNomexBMaterial,nomexbpar2,3);
 428       gMC->Gsvolu("SC5X","BOX",kNomexBMaterial,nomexbpar3,3);
 429       gMC->Gsvolu("SD5X","BOX",kNomexBMaterial,nomexbpar,3);
 430       gMC->Gsvolu("S06X","BOX",kNomexBMaterial,nomexbpar,3);
 431       gMC->Gsvolu("SC6X","BOX",kNomexBMaterial,nomexbpar3,3);
 432       gMC->Gsvolu("SD6X","BOX",kNomexBMaterial,nomexbpar,3);
 433
 434       // create the insulating material volume
 435
 436       gMC->Gsvolu("S05I","BOX",kInsuMaterial,insupar,3);
 437       gMC->Gsvolu("SB5I","BOX",kInsuMaterial,insupar2,3);
 438       gMC->Gsvolu("SC5I","BOX",kInsuMaterial,insupar3,3);
 439       gMC->Gsvolu("SD5I","BOX",kInsuMaterial,insupar,3);
 440       gMC->Gsvolu("S06I","BOX",kInsuMaterial,insupar,3);
 441       gMC->Gsvolu("SC6I","BOX",kInsuMaterial,insupar3,3);
 442       gMC->Gsvolu("SD6I","BOX",kInsuMaterial,insupar,3);
 443
 444       // create the PCB volume
 445
 446       gMC->Gsvolu("S05P","BOX",kPcbMaterial,pcbpar,3);
 447       gMC->Gsvolu("SB5P","BOX",kPcbMaterial,pcbpar2,3);
 448       gMC->Gsvolu("SC5P","BOX",kPcbMaterial,pcbpar3,3);
 449       gMC->Gsvolu("SD5P","BOX",kPcbMaterial,pcbpar,3);
 450       gMC->Gsvolu("S06P","BOX",kPcbMaterial,pcbpar,3);
 451       gMC->Gsvolu("SC6P","BOX",kPcbMaterial,pcbpar3,3);
 452       gMC->Gsvolu("SD6P","BOX",kPcbMaterial,pcbpar,3);
 453
 454       // create the sensitive volumes,
 455
 456       gMC->Gsvolu("S05G","BOX",kSensMaterial,dum,0);
 457       gMC->Gsvolu("SC5G","BOX",kSensMaterial,senspar3,3);
 458       gMC->Gsvolu("SD5G","BOX",kSensMaterial,senspar,3);
 459       gMC->Gsvolu("S06G","BOX",kSensMaterial,dum,0);
 460       gMC->Gsvolu("SC6G","BOX",kSensMaterial,senspar3,3);
 461       gMC->Gsvolu("SD6G","BOX",kSensMaterial,senspar,3);
 462
 463       // create the vertical frame volume
 464
 465       gMC->Gsvolu("S05V","BOX",kVframeMaterial,vFramepar,3);
 466       gMC->Gsvolu("S06V","BOX",kVframeMaterial,vFramepar,3);
 467
 468       // create the rounded vertical frame volume
 469
 470       gMC->Gsvolu("SC5D","TUBS",kRframeMaterial,cFramepar3,5);
 471       gMC->Gsvolu("SD5D","TUBS",kRframeMaterial,rFramepar3,5);
 472       gMC->Gsvolu("SC6D","TUBS",kRframeMaterial,cFramepar3,5);
 473       gMC->Gsvolu("SD6D","TUBS",kRframeMaterial,rFramepar3,5);
 474
 475       // create the horizontal frame volume
 476
 477       gMC->Gsvolu("S05H","BOX",kHframeMaterial,hFramepar,3);
 478       gMC->Gsvolu("SB5H","BOX",kHframeMaterial,hFramepar2,3);
 479       gMC->Gsvolu("SC5H","BOX",kHframeMaterial,hFramepar3,3);
 480       gMC->Gsvolu("SD5H","BOX",kHframeMaterial,hFramepar,3);
 481       gMC->Gsvolu("S06H","BOX",kHframeMaterial,hFramepar,3);
 482       gMC->Gsvolu("SC6H","BOX",kHframeMaterial,hFramepar3,3);
 483       gMC->Gsvolu("SD6H","BOX",kHframeMaterial,hFramepar,3);
 484
 485       // create the horizontal border volume
 486
 487       gMC->Gsvolu("S05B","BOX",kBframeMaterial,bFramepar,3);
 488       gMC->Gsvolu("SB5B","BOX",kBframeMaterial,bFramepar2,3);
 489       gMC->Gsvolu("SC5B","BOX",kBframeMaterial,bFramepar3,3);
 490       gMC->Gsvolu("SD5B","BOX",kBframeMaterial,bFramepar,3);
 491       gMC->Gsvolu("S06B","BOX",kBframeMaterial,bFramepar,3);
 492       gMC->Gsvolu("SC6B","BOX",kBframeMaterial,bFramepar3,3);
 493       gMC->Gsvolu("SD6B","BOX",kBframeMaterial,bFramepar,3);
 494
 495       // Replace the volume shape with a composite shape
 496       // with substracted overlap with beam shield
 497       if ( gMC->IsRootGeometrySupported() ) {
 498
 499         // Get shape
 500         Int_t nSlatType = 2;
 501         Int_t nVol = 8;
 502         const char* slatType = "CD"; // C: central slat; D: rounded slat
 503         const char* volLetter = "CNXIPHBG";
 504         TString volName;
 505         TString compName;
 506         TString csName;
 507         TGeoVolume *mVol = 0x0;
 508         TObjArray centerSlat(nSlatType*((nVol+1)*2));
 509         TObjArray composite(nSlatType*((nVol+1)*2));
 510
 511         // Beam shield recess
 512         new TGeoTube("tubeCut", 0., AliMUONConstants::Rmin(2), kSlatWidth/2.+0.001);
 513         // Displacement
 514         TGeoTranslation* trCTube = new TGeoTranslation("trCTube", -(kPcbLength-csvPcbLength/2.+kVframeLength/2.), 0., 0.);
 515         trCTube->RegisterYourself();
 516         TGeoTranslation* trDTube = new TGeoTranslation("trDTube", -(kPcbLength+kVframeLength)/2., -kYpos3[1], 0.);
 517         trDTube->RegisterYourself();
 518         TGeoTranslation* trCBTube = new TGeoTranslation("trCBTube", 0., ( kPcbHeight - kBframeHeight ) / 2., 0.);
 519         trCBTube->Add(trCTube);
 520         trCBTube->RegisterYourself();
 521         TGeoTranslation* trDBTube = new TGeoTranslation("trDBTube", 0., ( kPcbHeight - kBframeHeight ) / 2., 0.);
 522         trDBTube->Add(trDTube);
 523         trDBTube->RegisterYourself();
 524
 525         Float_t cPhi2 = (TMath::Pi()/2.-TMath::ACos((kSensHeight/2.)/(AliMUONConstants::Rmin(2)-kRframeLength)));
 526         TGeoBBox *boxCCut = new TGeoBBox("boxCCut",(cFramepar3[1]-cFramepar3[0]*TMath::Cos(cPhi2))/2., hFramepar3[1], cFramepar3[2]+0.001);
 527         // Displacement
 528         TGeoTranslation* trCBox = new TGeoTranslation("trCBox",cFramepar3[0]*TMath::Cos(cPhi2)+boxCCut->GetDX(), 0., 0.);
 529         trCBox->RegisterYourself();
 530         new TGeoBBox("boxDCut",(kPcbLength+kVframeLength)/2., hFramepar3[1], vFramepar[2]+0.001);
 531         // Displacement
 532         TGeoTranslation* trDBox = new TGeoTranslation("trDBox",kPcbLength/2., kYpos3[1], 0.);
 533         trDBox->RegisterYourself();
 534
 535         TGeoBBox *boxVframe = new TGeoBBox("boxVframe",vFramepar[0],vrFrameHeight/2., vFramepar[2]);
 536         TGeoTranslation* trVBox = new TGeoTranslation("trVBox", 0., AliMUONConstants::Rmin(2)-kRframeLength + boxVframe->GetDY(), 0.);
 537         trVBox->RegisterYourself();
 538
 539         for(int iCh=5; iCh<=6; iCh++){
 540           for (int iSlatType = 0; iSlatType<nSlatType; iSlatType++) {
 541             for (int iVol = 0; iVol<nVol; iVol++){
 542               Int_t lIndex = (iCh-5)*(nSlatType*(nVol+1))+iSlatType*(nVol+1)+iVol;
 543               volName=Form("S%c%d%c",slatType[iSlatType],iCh,volLetter[iVol]);
 544               mVol = gGeoManager->FindVolumeFast(volName);
 545               if ( !mVol ) {
 546                 AliErrorStream()
 547                   << "Slat volume " << volName << " not found" << endl;
 548               }
 549               else {
 550                 centerSlat[lIndex] = mVol->GetShape();
 551                 csName=Form("centerSlat%c%d%c",slatType[iSlatType],iCh,volLetter[iVol]);
 552                 ((TGeoShape*)centerSlat[lIndex])->SetName(csName);
 553
 554                 // Composite shape
 555                 TString compOperation(csName);
 556                 compOperation+="-tubeCut:tr";
 557                 compOperation+=slatType[iSlatType];
 558                 if (strstr(volName,"B")){
 559                   compOperation+="B";
 560                 }
 561                 compOperation+="Tube";
 562                 compName=Form("composite%d%c",iCh,volLetter[iVol]);
 563                 composite[lIndex] = new TGeoCompositeShape(compName, compOperation.Data());
 564
 565                 // Reset shape to volume
 566                 mVol->SetShape((TGeoShape*)composite[lIndex]);
 567               }
 568             }
 569
 570             // For rounded spacer
 571             Int_t lIndex = (iCh-5)*(nSlatType*(nVol+1))+iSlatType*(nVol+1)+nVol;
 572             volName=Form("S%c%dD",slatType[iSlatType],iCh);
 573             mVol = gGeoManager->FindVolumeFast(volName);
 574             if ( !mVol ) {
 575               AliErrorStream()
 576                 << "Slat volume " << volName << " not found" << endl;
 577             }
 578             else {
 579               centerSlat[lIndex] = mVol->GetShape();
 580               csName=Form("centerSlat%c%dD",slatType[iSlatType],iCh);
 581               ((TGeoShape*)centerSlat[lIndex])->SetName(csName);
 582
 583               // Composite shape
 584               TString compOperation(csName);
 585               if (strstr(volName,"SC")){
 586                 compOperation+="*boxCCut:trCBox";
 587               }
 588               if (strstr(volName,"SD")){
 589                 compOperation.Prepend("(");
 590                 compOperation+="+boxVframe:trVBox)*boxDCut:trDBox";
 591               }
 592               compName=Form("composite%c%dD",slatType[iSlatType],iCh);
 593               composite[lIndex] = new TGeoCompositeShape(compName, compOperation.Data());
 594               // Reset shape to volume
 595               mVol->SetShape((TGeoShape*)composite[lIndex]);
 596             }
 597           }
 598         }
 599       }
 600
 601       index = 0;
 602       for (i = 0; i<kNslats3; i++){
 603         for (Int_t quadrant = 1; quadrant <= 4; quadrant++) {
 604
 605           if (i == 0 && quadrant == 2) continue;
 606           if (i == 0 && quadrant == 4) continue;
 607
 608           sprintf(idSlatCh5,"SLA%d",ConvertSlatNum(i,quadrant,kNslats3-1));
 609           sprintf(idSlatCh6,"SLB%d",ConvertSlatNum(i,quadrant,kNslats3-1));
 610           Int_t moduleSlatCh5 = GetModuleId(idSlatCh5);
 611           Int_t moduleSlatCh6 = GetModuleId(idSlatCh6);
 612           Float_t xvFrame  = (slatLength3[i] - kVframeLength)/2.;
 613           Float_t xvFrame2  = xvFrame;
 614
 615           if (i == 0 || i == 1 || i == 2) xvFrame2 -= pcbDLength3; // Correct position (J.C.)
 616
 617           // position the vertical frames
 618           if ( i > 2) {
 619             GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05V", idSlatCh5,
 620                                                     (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
 621             GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05V", idSlatCh5,
 622                                                     (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
 623             GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06V", idSlatCh6,
 624                                                     (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
 625             GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06V", idSlatCh6,
 626                                                     (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
 627           }
 628
 629           if (i == 2) {
 630             GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05V", idSlatCh5,
 631                                                     (2*i-1)*10+quadrant,TGeoTranslation(xvFrame2,0.,0.));
 632             GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05V", idSlatCh5,
 633                                                     (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
 634             GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06V", idSlatCh6,
 635                                                     (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
 636             GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06V", idSlatCh6,
 637                                                     (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
 638           }
 639
 640           if (i == 0 || i == 1) { // first vertical spacers
 641             GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05V", idSlatCh5,
 642                                                     (2*i-1)*10+quadrant,TGeoTranslation(xvFrame2,0.,0.));
 643             GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06V", idSlatCh6,
 644                                                     (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
 645             if (i == 0) { // rounded spacer for central slat (J.C.)
 646               GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SC5D", idSlatCh5,
 647                                                                   (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
 648               GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SC6D", idSlatCh6,
 649                                                                   (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
 650
 651             }
 652             if (i == 1) { // rounded + vertical spacer for rounded slat (J.C.)
 653               GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SD5D", idSlatCh5,
 654                                                                   (2*i)*10+quadrant,TGeoTranslation(-xvFrame,-kYpos3[1],0.));
 655               GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SD6D", idSlatCh6,
 656                                                                   (2*i)*10+quadrant,TGeoTranslation(-xvFrame,-kYpos3[1],0.));
 657             }
 658           }
 659
 660           // position the panels and the insulating material
 661           for (j = 0; j < kNPCB3[i]; j++){
 662             index++;
 663             xx = kSensLength * (-kNPCB3[i]/2. + j + 0.5);
 664             Float_t xx2 = xx - pcbDLength3/2.;
 665             Float_t xx3 = xx + (kSensLength-csvPcbLength)/2.;
 666
 667             Float_t zPanel = spar[2] - nomexbpar[2];
 668
 669             if (i==0 && j==0){ // Rounded pcb of central slat (SR1, NR1)
 670               GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SC5X", idSlatCh5, 2*index-1,TGeoTranslation(xx3,0.,zPanel));
 671               GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SC5X", idSlatCh5, 2*index,TGeoTranslation(xx3,0.,-zPanel));
 672               GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SC5I", idSlatCh5, index,TGeoTranslation(xx3,0.,0.));
 673               GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SC6X", idSlatCh6, 2*index-1,TGeoTranslation(xx3,0.,zPanel));
 674               GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SC6X", idSlatCh6, 2*index,TGeoTranslation(xx3,0.,-zPanel));
 675               GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SC6I", idSlatCh6, index,TGeoTranslation(xx3,0.,0.));
 676             } else {
 677               if (i==1 && j==0){ // Rounded pcb of rounded slats (SR2. NR2)
 678                 GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SD5X", idSlatCh5, 2*index-1,TGeoTranslation(xx,0.,zPanel));
 679                 GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SD5X", idSlatCh5, 2*index,TGeoTranslation(xx,0.,-zPanel));
 680                 GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SD5I", idSlatCh5, index,TGeoTranslation(xx,0.,0.));
 681                 GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SD6X", idSlatCh6, 2*index-1,TGeoTranslation(xx,0.,zPanel));
 682                 GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SD6X", idSlatCh6, 2*index,TGeoTranslation(xx,0.,-zPanel));
 683                 GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("SD6I", idSlatCh6, index,TGeoTranslation(xx,0.,0.));
 684               } else {
 685                 if ( (i == 0 || i == 1 || i == 2) && j == kNPCB3[i]-1) { // 1 pcb is shortened by 5cm
 686                   GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SB5X", idSlatCh5, 2*index-1,TGeoTranslation(xx2,0.,zPanel));
 687                   GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SB5X", idSlatCh5, 2*index,TGeoTranslation(xx2,0.,-zPanel));
 688                   GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("SB5I", idSlatCh5, index,TGeoTranslation(xx2,0.,0.));
 689                 } else {
 690                   GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05X", idSlatCh5, 2*index-1,TGeoTranslation(xx,0.,zPanel));
 691                   GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05X", idSlatCh5, 2*index,TGeoTranslation(xx,0.,-zPanel));
 692                   GetEnvelopes(moduleSlatCh5)->AddEnvelopeConstituent("S05I", idSlatCh5, index,TGeoTranslation(xx,0.,0.));
 693                 }
 694                 GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06X", idSlatCh6, 2*index-1,TGeoTranslation(xx,0.,zPanel));
 695                 GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06X", idSlatCh6, 2*index,TGeoTranslation(xx,0.,-zPanel));
 696                 GetEnvelopes(moduleSlatCh6)->AddEnvelopeConstituent("S06I", idSlatCh6, index,TGeoTranslation(xx,0.,0.));
 697               }
 698             }
 699           }
 700         }
 701       }
 702
 703       // position the nomex volume inside the panel volume
 704       gMC->Gspos("S05N",1,"S05C",0.,0.,0.,0,"ONLY");
 705       gMC->Gspos("SB5N",1,"SB5C",0.,0.,0.,0,"ONLY");
 706       gMC->Gspos("SC5N",1,"SC5C",0.,0.,0.,0,"ONLY");
 707       gMC->Gspos("SD5N",1,"SD5C",0.,0.,0.,0,"ONLY");
 708       gMC->Gspos("S06N",1,"S06C",0.,0.,0.,0,"ONLY");
 709       gMC->Gspos("SC6N",1,"SC6C",0.,0.,0.,0,"ONLY");
 710       gMC->Gspos("SD6N",1,"SD6C",0.,0.,0.,0,"ONLY");
 711
 712       // position panel volume inside the bulk nomex material volume
 713       gMC->Gspos("S05C",1,"S05X",0.,0.,kNomexBWidth/2.,0,"ONLY");
 714       gMC->Gspos("SB5C",1,"SB5X",0.,0.,kNomexBWidth/2.,0,"ONLY");
 715       gMC->Gspos("SC5C",1,"SC5X",0.,0.,kNomexBWidth/2.,0,"ONLY");
 716       gMC->Gspos("SD5C",1,"SD5X",0.,0.,kNomexBWidth/2.,0,"ONLY");
 717       gMC->Gspos("S06C",1,"S06X",0.,0.,kNomexBWidth/2.,0,"ONLY");
 718       gMC->Gspos("SC6C",1,"SC6X",0.,0.,kNomexBWidth/2.,0,"ONLY");
 719       gMC->Gspos("SD6C",1,"SD6X",0.,0.,kNomexBWidth/2.,0,"ONLY");
 720
 721       // position the PCB volume inside the insulating material volume
 722       gMC->Gspos("S05P",1,"S05I",0.,0.,0.,0,"ONLY");
 723       gMC->Gspos("SB5P",1,"SB5I",0.,0.,0.,0,"ONLY");
 724       gMC->Gspos("SC5P",1,"SC5I",0.,0.,0.,0,"ONLY");
 725       gMC->Gspos("SD5P",1,"SD5I",0.,0.,0.,0,"ONLY");
 726       gMC->Gspos("S06P",1,"S06I",0.,0.,0.,0,"ONLY");
 727       gMC->Gspos("SC6P",1,"SC6I",0.,0.,0.,0,"ONLY");
 728       gMC->Gspos("SD6P",1,"SD6I",0.,0.,0.,0,"ONLY");
 729
 730       // position the horizontal frame volume inside the PCB volume
 731       gMC->Gspos("S05H",1,"S05P",0.,0.,0.,0,"ONLY");
 732       gMC->Gspos("SB5H",1,"SB5P",0.,0.,0.,0,"ONLY");
 733       gMC->Gspos("SC5H",1,"SC5P",0.,0.,0.,0,"ONLY");
 734       gMC->Gspos("SD5H",1,"SD5P",0.,0.,0.,0,"ONLY");
 735       gMC->Gspos("S06H",1,"S06P",0.,0.,0.,0,"ONLY");
 736       gMC->Gspos("SC6H",1,"SC6P",0.,0.,0.,0,"ONLY");
 737       gMC->Gspos("SD6H",1,"SD6P",0.,0.,0.,0,"ONLY");
 738
 739       // position the sensitive volume inside the horizontal frame volume
 740       gMC->Gsposp("S05G",1,"S05H",0.,0.,0.,0,"ONLY",senspar,3);
 741       gMC->Gsposp("S05G",1,"SB5H",0.,0.,0.,0,"ONLY",senspar2,3);
 742       gMC->Gspos("SC5G",1,"SC5H",0.,0.,0.,0,"ONLY");
 743       gMC->Gspos("SD5G",1,"SD5H",0.,0.,0.,0,"ONLY");
 744       gMC->Gsposp("S06G",1,"S06H",0.,0.,0.,0,"ONLY",senspar,3);
 745       gMC->Gspos("SC6G",1,"SC6H",0.,0.,0.,0,"ONLY");
 746       gMC->Gspos("SD6G",1,"SD6H",0.,0.,0.,0,"ONLY");
 747
 748
 749       // position the border volumes inside the PCB volume
 750       Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.;
 751       Int_t rotB = 0;
 752       gMC->Matrix(rotB,90,0,90,270,180,0); // rotation around x for second border
 753
 754       gMC->Gspos("S05B",1,"S05P",0., yborder,0.,0,"ONLY");
 755       gMC->Gspos("S05B",2,"S05P",0.,-yborder,0.,0,"ONLY");
 756       gMC->Gspos("SB5B",1,"SB5P",0., yborder,0.,0,"ONLY");
 757       gMC->Gspos("SB5B",2,"SB5P",0.,-yborder,0.,0,"ONLY");
 758       gMC->Gspos("SC5B",1,"SC5P",0., yborder,0.,rotB,"ONLY");
 759       gMC->Gspos("SC5B",2,"SC5P",0.,-yborder,0.,0,"ONLY");
 760       gMC->Gspos("S05B",1,"SD5P",0., yborder,0.,0,"ONLY");
 761       gMC->Gspos("SD5B",1,"SD5P",0.,-yborder,0.,0,"ONLY");
 762
 763       gMC->Gspos("S06B",1,"S06P",0., yborder,0.,0,"ONLY");
 764       gMC->Gspos("S06B",2,"S06P",0.,-yborder,0.,0,"ONLY");
 765       gMC->Gspos("SC6B",1,"SC6P",0., yborder,0.,rotB,"ONLY");
 766       gMC->Gspos("SC6B",2,"SC6P",0.,-yborder,0.,0,"ONLY");
 767       gMC->Gspos("S06B",1,"SD6P",0., yborder,0.,0,"ONLY");
 768       gMC->Gspos("SD6B",1,"SD6P",0.,-yborder,0.,0,"ONLY");
 769
 770       // create the NULOC volume and position it in the horizontal frame
 771       gMC->Gsvolu("S05E","BOX",kNulocMaterial,nulocpar,3);
 772       gMC->Gsvolu("S06E","BOX",kNulocMaterial,nulocpar,3);
 773       index = 0;
 774       Float_t xxmax2 = xxmax - pcbDLength3/2.;
 775       Float_t xxmax3 = xxmax - (kPcbLength-csvPcbLength)/2.;
 776       Float_t rPhi3 = TMath::ASin((kYpos3[1]-kPcbHeight/2.)/AliMUONConstants::Rmin(2));
 777       Float_t xxmax4 = (AliMUONConstants::Rmin(2)*TMath::Cos(rPhi3)-kVframeLength/2.) - (kBframeLength - kNulocLength)/2.;
 778       for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) {
 779         index++;
 780         gMC->Gspos("S05E",2*index-1,"S05B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY");
 781         gMC->Gspos("S05E",2*index  ,"S05B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY");
 782         gMC->Gspos("S06E",2*index-1,"S06B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY");
 783         gMC->Gspos("S06E",2*index  ,"S06B", xx, 0., kBframeWidth/2.-  kNulocWidth/2, 0, "ONLY");
 784         if (xx > -xxmax2 && xx< xxmax2) {
 785           gMC->Gspos("S05E",2*index-1,"SB5B", xx, 0.,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
 786           gMC->Gspos("S05E",2*index  ,"SB5B", xx, 0., kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
 787         }
 788         if (xx > -xxmax3 && xx< xxmax3) {
 789           gMC->Gspos("S05E",2*index-1,"SC5B", xx, 0.,-kBframeWidth/2.+ kNulocWidth/2., 0, "ONLY");
 790           gMC->Gspos("S05E",2*index  ,"SC5B", xx, 0., kBframeWidth/2.- kNulocWidth/2., 0, "ONLY");
 791           gMC->Gspos("S06E",2*index-1,"SC6B", xx, 0.,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
 792           gMC->Gspos("S06E",2*index  ,"SC6B", xx, 0., kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
 793         }
 794         if (xx > xxmax4 && xx< xxmax) {
 795           gMC->Gspos("S05E",2*index-1,"SD5B", xx, 0.,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
 796           gMC->Gspos("S05E",2*index  ,"SD5B", xx, 0., kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
 797           gMC->Gspos("S06E",2*index-1,"SD6B", xx, 0.,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
 798           gMC->Gspos("S06E",2*index  ,"SD6B", xx, 0., kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
 799         }
 800       }
 801
 802       //
 803       //Geometry of the support pannel Verticla length 3.62m, horizontal length 1.62m, internal radius  dMotherInner of SC05 and SC06  (F. Orsini, Saclay)
 804       //Carbon fiber of 0.3 mm thick (2 layers) and a central layer of Nomex of 15mm thick.
 805       // Outer excess and inner recess for mother volume radius
 806       // with respect to ROuter and RInner
 807       Float_t dMotherInner = AliMUONConstants::Rmin(2)-kRframeHeight;
 808       Float_t nomexthickness = 1.5;
 809       Float_t carbonthickness = 0.03;
 810       Float_t supporthlength =  162.;  //    chamber 5
 811       Float_t supporthlengthCh6 =  167.;  // chamber 6
 812       Float_t supportvlength =  362.;
 813
 814       // Generating the composite shape of the carbon and nomex pannels
 815       new TGeoBBox("shNomexBoxSt3",supporthlength/2., supportvlength/2. ,nomexthickness/2.+carbonthickness+3*kCableWidth);
 816       new TGeoBBox("shCarbonBoxSt3",supporthlength/2., supportvlength/2. ,carbonthickness/2.);
 817       new TGeoBBox("shNomexBoxSt3Ch6",(supporthlengthCh6)/2., supportvlength/2. ,nomexthickness/2.+carbonthickness+3*kCableWidth);
 818       new TGeoBBox("shCarbonBoxSt3Ch6",(supporthlengthCh6)/2., supportvlength/2. ,carbonthickness/2.);
 819       new TGeoTubeSeg("shNomexHoleSt3",0., dMotherInner, nomexthickness/2.+carbonthickness+3*kCableWidth+0.001, -90. ,90.);
 820       new TGeoTubeSeg("shCarbonHoleSt3",0., dMotherInner, carbonthickness/2.+0.001, -90. ,90.);
 821       TGeoTranslation* trHoleSt3 = new TGeoTranslation("trHoleSt3",-supporthlength/2.,0.,0.);
 822       trHoleSt3->RegisterYourself();
 823       TGeoTranslation* trHoleSt3Ch6 = new TGeoTranslation("trHoleSt3Ch6",-(supporthlengthCh6)/2.,0.,0.);
 824       trHoleSt3Ch6->RegisterYourself();
 825       TGeoCompositeShape* shNomexSupportSt3  = new TGeoCompositeShape("shNomexSupportSt3","shNomexBoxSt3-shNomexHoleSt3:trHoleSt3");
 826       TGeoCompositeShape* shCarbonSupportSt3 = new TGeoCompositeShape("shCarbonSupportSt3","shCarbonBoxSt3-shCarbonHoleSt3:trHoleSt3");
 827       TGeoCompositeShape* shNomexSupportSt3Ch6  = new TGeoCompositeShape("shNomexSupportSt3Ch6","shNomexBoxSt3Ch6-shNomexHoleSt3:trHoleSt3Ch6");
 828       TGeoCompositeShape* shCarbonSupportSt3Ch6 = new TGeoCompositeShape("shCarbonSupportSt3Ch6","shCarbonBoxSt3Ch6-shCarbonHoleSt3:trHoleSt3Ch6");
 829
 830       // Generating Nomex and Carbon pannel volumes
 831       TGeoVolume * voNomexSupportSt3  = new TGeoVolume("S05S", shNomexSupportSt3, kMedNomex);
 832       TGeoVolume * voCarbonSupportSt3 = new TGeoVolume("S05K", shCarbonSupportSt3, kMedCarbon);
 833       TGeoVolume * voNomexSupportSt3Ch6  = new TGeoVolume("S06S", shNomexSupportSt3Ch6, kMedNomex);
 834       TGeoVolume * voCarbonSupportSt3Ch6 = new TGeoVolume("S06K", shCarbonSupportSt3Ch6, kMedCarbon);
 835
 836       TGeoTranslation *trCarbon1St3   = new TGeoTranslation("trCarbon1St3",0.,0., -(nomexthickness+carbonthickness)/2.);
 837       TGeoTranslation *trCarbon2St3   = new TGeoTranslation("trCarbon2St3",0.,0.,  (nomexthickness+carbonthickness)/2.);
 838       voNomexSupportSt3->AddNode(voCarbonSupportSt3,1,trCarbon1St3);
 839       voNomexSupportSt3->AddNode(voCarbonSupportSt3,2,trCarbon2St3);
 840       voNomexSupportSt3Ch6->AddNode(voCarbonSupportSt3Ch6,1,trCarbon1St3);
 841       voNomexSupportSt3Ch6->AddNode(voCarbonSupportSt3Ch6,2,trCarbon2St3);
 842
 843
 844       // Add readout cables
 845       gMC->Gsvolu("S05L","BOX",kCableMaterial,dum,0);
 846       gMC->Gsvolu("S06L","BOX",kCableMaterial,dum,0);
 847
 848       ySlat3 = 0.;
 849       Float_t lCableX = 0.;
 850       Float_t lCableX6 = 0.;
 851       Float_t lCableY = 0.;
 852       Float_t lCableZ = 0.;
 853       Float_t cablepar[3] = {supporthlength/2., kCableHeight/2., kCableWidth/2.};
 854       Float_t cablepar6[3] = {supporthlengthCh6/2., kCableHeight/2., kCableWidth/2.};
 855       Float_t lCableDY = 0.;
 856       Int_t cIndex = 0;
 857       Int_t cIndex6 = 0;
 858       for (i = 0; i<kNslats3; i++){
 859         Int_t iCable = 1;
 860         cIndex = 0;
 861         cIndex6 = 0;
 862         ySlat3 += kYpos3[i];
 863         lCableY = ySlat3;
 864
 865         // Cables going out from the start of slat
 866         if(kNPCB3[i]>=4){ // Only if 4 or more pcb
 867           // First top cables
 868           cablepar[0] = supporthlength/2.;
 869           lCableX = 0.;
 870           cablepar6[0] = supporthlengthCh6/2.;
 871           lCableX6 = 0.;
 872           lCableDY = (kYpos3[i+1]+kYpos3[i+2])/2.-cablepar[1]; // half way between 2 slats on same side
 873           lCableZ = TMath::Power(-1,i)*(nomexthickness/2.+carbonthickness+(-1+iCable++)*kCableWidth+kCableWidth/2.);
 874           if(i==0){ // central slat is shorter (rounded)
 875             cablepar[0] -= (kPcbLength-csvPcbLength)/2.;
 876             lCableX = (kPcbLength-csvPcbLength)/2.;
 877             cablepar6[0] -= (kPcbLength-csvPcbLength)/2.;
 878             lCableX6 = (kPcbLength-csvPcbLength)/2.;
 879           }
 880           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
 881           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
 882           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar6,3);
 883           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar6,3);
 884
 885           // Then bottom cables
 886           if(i>0){
 887             if(i==1){ // Rounded slat. Bottom cable starts at dMotherInner (beam pipe)
 888               cablepar[0] -= dMotherInner/2.;
 889               lCableX += dMotherInner/2.;
 890               cablepar6[0] -= dMotherInner/2.;
 891               lCableX6 += dMotherInner/2.;
 892               lCableDY = (kYpos3[i]+kYpos3[i])/2.-cablepar[1];
 893             }
 894             if(i>=2){
 895               lCableDY = (kYpos3[i]+kYpos3[i-1])/2.-cablepar[1]; // half way between 2 slats on same side
 896               if ((lCableY-lCableDY)<(dMotherInner+cablepar[1])){
 897                 lCableDY = lCableY - dMotherInner - cablepar[1];
 898               }
 899             }
 900             gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar,3);
 901             gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar,3);
 902             gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar6,3);
 903             gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar6,3);
 904           }
 905         }
 906
 907         // Rounded slats have an extra cable starting at second pcb
 908         if(i==1){
 909           // First top cables
 910           cablepar[0] = (supporthlength-kPcbLength-kVframeLength)/2.;
 911           lCableX = (kPcbLength+kVframeLength)/2.;
 912           cablepar6[0] = (supporthlengthCh6-kPcbLength-kVframeLength)/2.;
 913           lCableX6 = (kPcbLength+kVframeLength)/2.;
 914           lCableDY = (kYpos3[i+1]+kYpos3[i+2])/2.-cablepar[1]; // half way between 2 slats on same side
 915           lCableZ = TMath::Power(-1,i)*(nomexthickness/2.+carbonthickness+(-1+iCable++)*kCableWidth+kCableWidth/2.);
 916           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
 917           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
 918           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar6,3);
 919           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar6,3);
 920           // Then bottom cables
 921           lCableDY = (kYpos3[i]+kYpos3[i])/2.-cablepar[1];
 922           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar,3);
 923           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar,3);
 924           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar6,3);
 925           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar6,3);
 926         }
 927
 928         // Cables going out from the end of the slats
 929         // First top cables
 930         cablepar[0] = (supporthlength-(slatLength3[i]+kDslatLength)+kVframeLength)/2.;
 931         lCableX = slatLength3[i]-kVframeLength+kDslatLength+cablepar[0]-supporthlength/2.;
 932         cablepar6[0] = (supporthlengthCh6-(slatLength3[i]+kDslatLength)+kVframeLength)/2.;
 933         lCableX6 = slatLength3[i]-kVframeLength+kDslatLength+cablepar6[0]-supporthlengthCh6/2.;
 934         if(i+1>=kNslats3 || i+2>=kNslats3){ // If no more higher slats, then use distance to lower slat
 935           lCableDY = kPcbHeight/2.+cablepar[1];
 936         }
 937         else {
 938           lCableDY = (kYpos3[i+1]+kYpos3[i+2])/2.-cablepar[1];
 939         }
 940         lCableZ = TMath::Power(-1,i)*(nomexthickness/2.+carbonthickness+(-1+iCable++)*kCableWidth+kCableWidth/2.);
 941
 942         if (i<=2){ // shortened pcb
 943           cablepar[0] += pcbDLength3/2.;
 944           lCableX -=  pcbDLength3/2.;
 945         }
 946         gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
 947         gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
 948         gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar6,3);
 949         gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar6,3);
 950         // Then bottom cables
 951         if(i>0){ // Loop is over top half of slats, lower half are symmetric
 952           if (i==1) {
 953             lCableDY = (kYpos3[i]+kYpos3[i])/2.-cablepar[1];
 954           }
 955           else{
 956             lCableDY = (kYpos3[i]+kYpos3[i-1])/2.-cablepar[1]; // half way between 2 slats on same side
 957           }
 958           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar,3);
 959           gMC->Gsposp("S05L",100*i+cIndex++,"S05S",lCableX,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar,3);
 960           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar6,3);
 961           gMC->Gsposp("S06L",100*i+cIndex6++,"S06S",lCableX6,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar6,3);
 962         }
 963       }
 964
 965       Float_t dzCh5  = dzCh;
 966       TGeoTranslation* trSupport1St3   = new TGeoTranslation("trSupport1St3", supporthlength/2., 0. , dzCh5);
 967       TGeoRotation*    roSupportSt3    = new TGeoRotation("roSupportSt3",90.,180.,-90.);
 968       TGeoCombiTrans*  coSupport2St3   = new TGeoCombiTrans(-supporthlength/2., 0., -dzCh5, roSupportSt3);
 969       TGeoTranslation* trSupport1St3Ch6   = new TGeoTranslation("trSupport1St3Ch6", supporthlengthCh6/2., 0. , dzCh5);
 970       TGeoCombiTrans*  coSupport2St3Ch6   = new TGeoCombiTrans(-supporthlengthCh6/2., 0., -dzCh5, roSupportSt3);
 971       GetEnvelopes(5)->AddEnvelope("S05S", 0, 1, *trSupport1St3);
 972       GetEnvelopes(4)->AddEnvelope("S05S", 0, 2, *coSupport2St3);
 973       GetEnvelopes(7)->AddEnvelope("S06S", 0, 1, *trSupport1St3Ch6);
 974       GetEnvelopes(6)->AddEnvelope("S06S", 0, 2, *coSupport2St3Ch6);
 975       // End of pannel support geometry
 976
 977       // cout << "Geometry for Station 3...... done" << endl;
 978     }
 979   if (fStations[3]) {
 980
 981
 982     // //********************************************************************
 983     // //                            Station 4                             **
 984     // //********************************************************************
 985     // Mother volume for each chamber in St4 is an envelop (or assembly)
 986     // There is one assembly mother per half a chamber  called SC07I, SC07O, SC08I and SC08O
 987     // Same volume name definitions as in St3
 988     const Int_t   kNslats4          = 7;  // number of slats per quadrant
 989     const Int_t   kNPCB4[kNslats4]  = {5, 6, 5, 5, 4, 3, 2}; // n PCB per slat
 990     const Float_t kXpos4[kNslats4]  = {38.75, 0., 0., 0., 0., 0., 0.}; // J.C. Correct value
 991     const Float_t kYpos41[kNslats4] = {0., 38.2, 34.40, 36.60, 29.3, 37.0, 28.6};
 992     const Float_t kYpos42[kNslats4] = {0., 38.2, 37.85, 37.55, 29.4, 37.0, 28.6};
 993     Float_t slatLength4[kNslats4];
 994
 995     Float_t rPhi1 = TMath::RadToDeg()*(TMath::ASin((kYpos41[1]-hFramepar[1])/(AliMUONConstants::Rmin(3))));
 996     Float_t rPhi2 = TMath::RadToDeg()*(TMath::ACos(-vFramepar[0]/(AliMUONConstants::Rmin(3)-kRframeLength)));
 997     Float_t rFramepar4[5] = { AliMUONConstants::Rmin(3)-kRframeLength, AliMUONConstants::Rmin(3), kRframeWidth, rPhi1, rPhi2};
 998     Float_t vrFrameHeight = hFramepar[1]+kYpos41[1]-AliMUONConstants::Rmin(3)+kRframeLength;
 999
1000     char idSlatCh7[6];
1001     char idSlatCh8[6];
1002     Float_t xSlat4;
1003     Float_t ySlat41 = 0;
1004     Float_t ySlat42 = 0;
1005     angle = 0.;
1006
1007     for (i = 0; i<kNslats4; i++){
1008       slatLength4[i] = kPcbLength * kNPCB4[i] + 2. * kVframeLength;
1009       xSlat4 = slatLength4[i]/2. + kDslatLength + kXpos4[i];
1010       ySlat41 += kYpos41[i];
1011       ySlat42 += kYpos42[i];
1012
1013       spar[0] = slatLength4[i]/2.;
1014       spar[1] = kSlatHeight/2.;
1015       spar[2] = kSlatWidth/2.;
1016       Float_t dzCh4 = dzCh;
1017       Float_t zSlat4 = (i%2 ==0)? -zSlat : zSlat;
1018
1019       sprintf(idSlatCh7,"SLC%d",kNslats4-1+i);
1020       detElemId = 713 - (i + kNslats4-1-6);
1021       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1022       if (detElemId % 2 == 0)
1023           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, ySlat41, -zSlat4 + dzCh4),
1024                                    TGeoRotation("rot1",90,angle,90,90+angle,0,0) );
1025       else
1026           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, ySlat41, -zSlat4 + dzCh4),
1027                                    TGeoRotation("rot1",90,angle,90,270+angle,180,0) );
1028
1029       sprintf(idSlatCh7,"SLC%d",3*kNslats4-2+i);
1030       detElemId = 700 + (i + kNslats4-1-6);
1031       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1032       if (detElemId % 2 == 0)
1033           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(-xSlat4, ySlat41, zSlat4 - dzCh4),
1034                                    TGeoRotation("rot2",90,180+angle,90,270+angle,0,0) );
1035       else
1036           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(-xSlat4, ySlat41, zSlat4 - dzCh4),
1037                                    TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) );
1038       if (i > 0) {
1039         sprintf(idSlatCh7,"SLC%d",kNslats4-1-i);
1040         detElemId = 713 + (i + kNslats4-1-6);
1041         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1042         if (detElemId % 2 == 0 && detElemId != 714)
1043             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, -ySlat41, -zSlat4 + dzCh4),
1044                                                 TGeoRotation("rot3",90,angle,90,90+angle,0,0) );
1045         else
1046             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(xSlat4, -ySlat41, -zSlat4 + dzCh4),
1047                                                 TGeoRotation("rot3",90,angle,90,270+angle,180,0) );
1048         sprintf(idSlatCh7,"SLC%d",3*kNslats4-2-i);
1049         detElemId = 726 - (i + kNslats4-1-6);
1050         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1051         if (detElemId % 2 == 1 && detElemId != 725 )
1052             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(-xSlat4, -ySlat41, zSlat4 - dzCh4),
1053                                      TGeoRotation("rot4",90,180+angle,90,90+angle,180,0) );
1054         else
1055              GetEnvelopes(moduleId)->AddEnvelope(idSlatCh7, detElemId, true, TGeoTranslation(-xSlat4, -ySlat41, zSlat4 - dzCh4),
1056                                      TGeoRotation("rot4",90,180+angle,90,270+angle,0,0) );
1057       }
1058
1059       sprintf(idSlatCh8,"SLD%d",kNslats4-1+i);
1060       detElemId = 813 - (i + kNslats4-1-6);
1061       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1062       if (detElemId % 2 == 0)
1063           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, ySlat42, -zSlat4 + dzCh4),
1064                                    TGeoRotation("rot5",90,angle,90,90+angle,0,0) );
1065       else
1066           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, ySlat42, -zSlat4 + dzCh4),
1067                                    TGeoRotation("rot5",90,angle,90,270+angle,180,0) );
1068
1069       sprintf(idSlatCh8,"SLD%d",3*kNslats4-2+i);
1070       detElemId = 800 + (i + kNslats4-1-6);
1071       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1072       if (detElemId % 2 == 0)
1073           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, ySlat42, zSlat4 - dzCh4),
1074                                    TGeoRotation("rot6",90,180+angle,90,270+angle,0,0) );
1075       else
1076           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, ySlat42, zSlat4 - dzCh4),
1077                                    TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) );
1078       if (i > 0) {
1079         sprintf(idSlatCh8,"SLD%d",kNslats4-1-i);
1080         detElemId = 813 + (i + kNslats4-1-6);
1081         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1082         if (detElemId % 2 == 0 && detElemId != 814)
1083             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, -ySlat42, -zSlat4 + dzCh4),
1084                                                 TGeoRotation("rot7",90,angle,90,90+angle,0,0) );
1085         else
1086             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(xSlat4, -ySlat42, -zSlat4 + dzCh4),
1087                                                 TGeoRotation("rot7",90,angle,90,270+angle,180,0) );
1088         sprintf(idSlatCh8,"SLD%d",3*kNslats4-2-i);
1089         detElemId = 826 - (i + kNslats4-1-6);
1090         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1091         if (detElemId % 2 == 1 && detElemId != 825 )
1092             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, -ySlat42, zSlat4 - dzCh4),
1093                                      TGeoRotation("rot8",90,180+angle,90,90+angle,180,0) );
1094         else
1095             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh8, detElemId, true, TGeoTranslation(-xSlat4, -ySlat42, zSlat4 - dzCh4),
1096                                      TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) );
1097
1098       }
1099     }
1100
1101     // create the panel volume
1102
1103     gMC->Gsvolu("S07C","BOX",kCarbonMaterial,panelpar,3);
1104     gMC->Gsvolu("SD7C","BOX",kCarbonMaterial,panelpar,3);
1105     gMC->Gsvolu("S08C","BOX",kCarbonMaterial,panelpar,3);
1106     gMC->Gsvolu("SD8C","BOX",kCarbonMaterial,panelpar,3);
1107
1108     // create the nomex volume
1109
1110     gMC->Gsvolu("S07N","BOX",kNomexMaterial,nomexpar,3);
1111     gMC->Gsvolu("SD7N","BOX",kNomexMaterial,nomexpar,3);
1112     gMC->Gsvolu("S08N","BOX",kNomexMaterial,nomexpar,3);
1113     gMC->Gsvolu("SD8N","BOX",kNomexMaterial,nomexpar,3);
1114
1115
1116     // create the nomex volume (bulk)
1117
1118     gMC->Gsvolu("S07X","BOX",kNomexBMaterial,nomexbpar,3);
1119     gMC->Gsvolu("SD7X","BOX",kNomexBMaterial,nomexbpar,3);
1120     gMC->Gsvolu("S08X","BOX",kNomexBMaterial,nomexbpar,3);
1121     gMC->Gsvolu("SD8X","BOX",kNomexBMaterial,nomexbpar,3);
1122
1123     // create the insulating material volume
1124
1125     gMC->Gsvolu("S07I","BOX",kInsuMaterial,insupar,3);
1126     gMC->Gsvolu("SD7I","BOX",kInsuMaterial,insupar,3);
1127     gMC->Gsvolu("S08I","BOX",kInsuMaterial,insupar,3);
1128     gMC->Gsvolu("SD8I","BOX",kInsuMaterial,insupar,3);
1129
1130     // create the PCB volume
1131
1132     gMC->Gsvolu("S07P","BOX",kPcbMaterial,pcbpar,3);
1133     gMC->Gsvolu("SD7P","BOX",kPcbMaterial,pcbpar,3);
1134     gMC->Gsvolu("S08P","BOX",kPcbMaterial,pcbpar,3);
1135     gMC->Gsvolu("SD8P","BOX",kPcbMaterial,pcbpar,3);
1136
1137     // create the sensitive volumes,
1138
1139     gMC->Gsvolu("S07G","BOX",kSensMaterial,dum,0);
1140     gMC->Gsvolu("SD7G","BOX",kSensMaterial,senspar,3);
1141     gMC->Gsvolu("S08G","BOX",kSensMaterial,dum,0);
1142     gMC->Gsvolu("SD8G","BOX",kSensMaterial,senspar,3);
1143
1144     // create the vertical frame volume
1145
1146     gMC->Gsvolu("S07V","BOX",kVframeMaterial,vFramepar,3);
1147     gMC->Gsvolu("S08V","BOX",kVframeMaterial,vFramepar,3);
1148
1149     // create the rounded vertical frame volume
1150
1151     gMC->Gsvolu("SD7D","TUBS",kRframeMaterial,rFramepar4,5);
1152     gMC->Gsvolu("SD8D","TUBS",kRframeMaterial,rFramepar4,5);
1153
1154     // create the horizontal frame volume
1155
1156     gMC->Gsvolu("S07H","BOX",kHframeMaterial,hFramepar,3);
1157     gMC->Gsvolu("SD7H","BOX",kHframeMaterial,hFramepar,3);
1158     gMC->Gsvolu("S08H","BOX",kHframeMaterial,hFramepar,3);
1159     gMC->Gsvolu("SD8H","BOX",kHframeMaterial,hFramepar,3);
1160
1161     // create the horizontal border volume
1162
1163     gMC->Gsvolu("S07B","BOX",kBframeMaterial,bFramepar,3);
1164     gMC->Gsvolu("SD7B","BOX",kBframeMaterial,bFramepar,3);
1165     gMC->Gsvolu("S08B","BOX",kBframeMaterial,bFramepar,3);
1166     gMC->Gsvolu("SD8B","BOX",kBframeMaterial,bFramepar,3);
1167
1168     // Replace the volume shape with a composite shape
1169     // with substracted overlap with beam shield
1170     if ( gMC->IsRootGeometrySupported() ) {
1171
1172       // Get shape
1173       Int_t nSlatType = 1;
1174       Int_t nVol = 8;
1175       const char* slatType = "D"; // D: Rounded slat
1176       const char* volLetter = "CNXIPHBG";
1177       TString volName;
1178       TString compName;
1179       TString csName;
1180       TGeoVolume *mVol = 0x0;
1181       // Beam shield recess
1182       new TGeoTube("tube4Cut", 0., AliMUONConstants::Rmin(3), kSlatWidth/2.+0.001);
1183       TObjArray rounded4Slat(nSlatType*((nVol+1)*2));
1184       // Displacement
1185       TGeoTranslation* trDTube4 = new TGeoTranslation("trDTube4", -(kPcbLength+kVframeLength)/2., -kYpos41[1], 0.);
1186       trDTube4->RegisterYourself();
1187       TGeoTranslation* trDBTube4 = new TGeoTranslation("trDBTube4", 0., ( kPcbHeight - kBframeHeight ) / 2., 0.);
1188       trDBTube4->Add(trDTube4);
1189       trDBTube4->RegisterYourself();
1190
1191       TObjArray composite4(nSlatType*((nVol+1)*2));
1192       new TGeoBBox("box4DCut",(kPcbLength+kVframeLength)/2., hFramepar[1], vFramepar[2]+0.001);
1193       // Displacement
1194       TGeoTranslation* trDBox4 = new TGeoTranslation("trDBox4",kPcbLength/2., kYpos41[1], 0.);
1195       trDBox4->RegisterYourself();
1196
1197       TGeoBBox *box4Vframe = new TGeoBBox("box4Vframe",vFramepar[0],vrFrameHeight/2., vFramepar[2]);
1198       TGeoTranslation* trVBox4 = new TGeoTranslation("trVBox4", 0., AliMUONConstants::Rmin(3)-kRframeLength + box4Vframe->GetDY(), 0.);
1199       trVBox4->RegisterYourself();
1200
1201       for(int iCh=7; iCh<=8; iCh++){
1202         for (int iSlatType = 0; iSlatType<nSlatType; iSlatType++) {
1203           for (int iVol = 0; iVol<nVol; iVol++){
1204             Int_t lIndex = (iCh-7)*(nSlatType*(nVol+1))+iSlatType*(nVol+1)+iVol;
1205             volName=Form("S%c%d%c",slatType[iSlatType],iCh,volLetter[iVol]);
1206             mVol = gGeoManager->FindVolumeFast(volName);
1207             if ( !mVol ) {
1208               AliErrorStream()
1209                 << "Slat volume " << volName << " not found" << endl;
1210             }
1211             else {
1212               rounded4Slat[lIndex] = mVol->GetShape();
1213               csName=Form("rounded4Slat%c%d%c",slatType[iSlatType],iCh,volLetter[iVol]);
1214               ((TGeoShape*)rounded4Slat[lIndex])->SetName(csName);
1215
1216               // Composite shape
1217               TString compOperation(csName);
1218               compOperation+="-tube4Cut:tr";
1219               compOperation+=slatType[iSlatType];
1220               if (strstr(volName,"B")){
1221                 compOperation+="B";
1222               }
1223               compOperation+="Tube4";
1224               compName=Form("composite4%d%c",iCh,volLetter[iVol]);
1225               composite4[lIndex] = new TGeoCompositeShape(compName, compOperation.Data());
1226
1227               // Reset shape to volume
1228               mVol->SetShape((TGeoShape*)composite4[lIndex]);
1229             }
1230           }
1231
1232           // For rounded spacer
1233           Int_t lIndex = (iCh-7)*(nSlatType*(nVol+1))+iSlatType*(nVol+1)+nVol;
1234           volName=Form("S%c%dD",slatType[iSlatType],iCh);
1235           mVol = gGeoManager->FindVolumeFast(volName);
1236           if ( !mVol ) {
1237             AliErrorStream()
1238               << "Slat volume " << volName << " not found" << endl;
1239           }
1240           else {
1241             rounded4Slat[lIndex] = mVol->GetShape();
1242             csName=Form("rounded4Slat%c%dD",slatType[iSlatType],iCh);
1243             ((TGeoShape*)rounded4Slat[lIndex])->SetName(csName);
1244
1245             // Composite shape
1246             TString compOperation(csName);
1247             if (strstr(volName,"SD")){
1248               compOperation.Prepend("(");
1249               compOperation+="+box4Vframe:trVBox4)*box4DCut:trDBox4";
1250             }
1251             compName=Form("composite4%c%dD",slatType[iSlatType],iCh);
1252             composite4[lIndex] = new TGeoCompositeShape(compName, compOperation.Data());
1253             // Reset shape to volume
1254             mVol->SetShape((TGeoShape*)composite4[lIndex]);
1255           }
1256         }
1257       }
1258     }
1259
1260
1261     index = 0;
1262     for (i = 0; i < kNslats4; i++){
1263       for (Int_t quadrant = 1; quadrant <= 4; quadrant++) {
1264
1265         if (i == 0 && quadrant == 2) continue;
1266         if (i == 0 && quadrant == 4) continue;
1267
1268         sprintf(idSlatCh7,"SLC%d",ConvertSlatNum(i,quadrant,kNslats4-1));
1269         sprintf(idSlatCh8,"SLD%d",ConvertSlatNum(i,quadrant,kNslats4-1));
1270         Int_t moduleSlatCh7 = GetModuleId(idSlatCh7);
1271         Int_t moduleSlatCh8 = GetModuleId(idSlatCh8);
1272
1273         Float_t xvFrame  = (slatLength4[i] - kVframeLength)/2.;
1274
1275         // position the vertical frames
1276         if (i != 1) {
1277           GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1278           GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
1279           GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1280           GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
1281         } else { // Vertical and Rounded+Vertical spacer
1282           GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("S07V", idSlatCh7, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1283           GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("SD7D", idSlatCh7, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,-kYpos41[1],0.));
1284           GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("S08V", idSlatCh8, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1285           GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("SD8D", idSlatCh8, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,-kYpos42[1],0.));
1286         }
1287         // position the panels and the insulating material
1288         for (j = 0; j < kNPCB4[i]; j++){
1289           index++;
1290           xx = kSensLength * (-kNPCB4[i]/2.+j+.5);
1291           Float_t zPanel = spar[2] - nomexbpar[2];
1292           if (i==1 && j==0){ // Rounded pcb of rounded slat
1293             GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("SD7X", idSlatCh7, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1294             GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("SD7X", idSlatCh7, 2*index,TGeoTranslation(xx,0.,-zPanel));
1295             GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("SD7I", idSlatCh7, index,TGeoTranslation(xx,0.,0.));
1296             GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("SD8X", idSlatCh8, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1297             GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("SD8X", idSlatCh8, 2*index,TGeoTranslation(xx,0.,-zPanel));
1298             GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("SD8I", idSlatCh8, index,TGeoTranslation(xx,0.,0.));
1299           } else {
1300             GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("S07X", idSlatCh7, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1301             GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("S07X", idSlatCh7, 2*index,TGeoTranslation(xx,0.,-zPanel));
1302             GetEnvelopes(moduleSlatCh7)->AddEnvelopeConstituent("S07I", idSlatCh7, index,TGeoTranslation(xx,0.,0.));
1303             GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("S08X", idSlatCh8, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1304             GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("S08X", idSlatCh8, 2*index,TGeoTranslation(xx,0.,-zPanel));
1305             GetEnvelopes(moduleSlatCh8)->AddEnvelopeConstituent("S08I", idSlatCh8, index,TGeoTranslation(xx,0.,0.));
1306           }
1307         }
1308       }
1309     }
1310
1311     // position the nomex volume inside the panel volume
1312     gMC->Gspos("S07N",1,"S07C",0.,0.,0.,0,"ONLY");
1313     gMC->Gspos("SD7N",1,"SD7C",0.,0.,0.,0,"ONLY");
1314     gMC->Gspos("S08N",1,"S08C",0.,0.,0.,0,"ONLY");
1315     gMC->Gspos("SD8N",1,"SD8C",0.,0.,0.,0,"ONLY");
1316
1317     // position panel volume inside the bulk nomex material volume
1318     gMC->Gspos("S07C",1,"S07X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1319     gMC->Gspos("SD7C",1,"SD7X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1320     gMC->Gspos("S08C",1,"S08X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1321     gMC->Gspos("SD8C",1,"SD8X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1322
1323     // position the PCB volume inside the insulating material volume
1324     gMC->Gspos("S07P",1,"S07I",0.,0.,0.,0,"ONLY");
1325     gMC->Gspos("SD7P",1,"SD7I",0.,0.,0.,0,"ONLY");
1326     gMC->Gspos("S08P",1,"S08I",0.,0.,0.,0,"ONLY");
1327     gMC->Gspos("SD8P",1,"SD8I",0.,0.,0.,0,"ONLY");
1328
1329     // position the horizontal frame volume inside the PCB volume
1330     gMC->Gspos("S07H",1,"S07P",0.,0.,0.,0,"ONLY");
1331     gMC->Gspos("SD7H",1,"SD7P",0.,0.,0.,0,"ONLY");
1332     gMC->Gspos("S08H",1,"S08P",0.,0.,0.,0,"ONLY");
1333     gMC->Gspos("SD8H",1,"SD8P",0.,0.,0.,0,"ONLY");
1334
1335     // position the sensitive volume inside the horizontal frame volume
1336     gMC->Gsposp("S07G",1,"S07H",0.,0.,0.,0,"ONLY",senspar,3);
1337     gMC->Gspos("SD7G",1,"SD7H",0.,0.,0.,0,"ONLY");
1338     gMC->Gsposp("S08G",1,"S08H",0.,0.,0.,0,"ONLY",senspar,3);
1339     gMC->Gspos("SD8G",1,"SD8H",0.,0.,0.,0,"ONLY");
1340
1341     // position the border volumes inside the PCB volume
1342     Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.;
1343     gMC->Gspos("S07B",1,"S07P",0., yborder,0.,0,"ONLY");
1344     gMC->Gspos("S07B",2,"S07P",0.,-yborder,0.,0,"ONLY");
1345     gMC->Gspos("S07B",1,"SD7P",0., yborder,0.,0,"ONLY");
1346     gMC->Gspos("SD7B",1,"SD7P",0.,-yborder,0.,0,"ONLY");
1347     gMC->Gspos("S08B",1,"S08P",0., yborder,0.,0,"ONLY");
1348     gMC->Gspos("S08B",2,"S08P",0.,-yborder,0.,0,"ONLY");
1349     gMC->Gspos("S08B",1,"SD8P",0., yborder,0.,0,"ONLY");
1350     gMC->Gspos("SD8B",1,"SD8P",0.,-yborder,0.,0,"ONLY");
1351
1352     // create the NULOC volume and position it in the horizontal frame
1353
1354     gMC->Gsvolu("S07E","BOX",kNulocMaterial,nulocpar,3);
1355     gMC->Gsvolu("S08E","BOX",kNulocMaterial,nulocpar,3);
1356     index = 0;
1357     Float_t rPhi3 = TMath::ASin((kYpos41[1]-kPcbHeight/2.)/AliMUONConstants::Rmin(3));
1358     Float_t xxmax4 = (AliMUONConstants::Rmin(3)*TMath::Cos(rPhi3)-kVframeLength/2.) - (kBframeLength - kNulocLength)/2.;
1359     for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) {
1360       index++;
1361       gMC->Gspos("S07E",2*index-1,"S07B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY");
1362       gMC->Gspos("S07E",2*index  ,"S07B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY");
1363       gMC->Gspos("S08E",2*index-1,"S08B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY");
1364       gMC->Gspos("S08E",2*index  ,"S08B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY");
1365     }
1366     if (xx > xxmax4 && xx< xxmax) {
1367       gMC->Gspos("S07E",2*index-1,"SD7B", xx, 0.,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
1368       gMC->Gspos("S07E",2*index  ,"SD7B", xx, 0., kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
1369       gMC->Gspos("S08E",2*index-1,"SD8B", xx, 0.,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
1370       gMC->Gspos("S08E",2*index  ,"SD8B", xx, 0., kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
1371     }
1372
1373     //
1374     //Geometry of the support pannel Verticla length 5.3m, horizontal length 2.6m, internal radius  dMotherInner o SC07 and SC08  (F. Orsini, Saclay)
1375     //Carbon fiber of 0.3 mm thick (2 layers) and a central layer of Nomex of 15mm thick.
1376     Float_t dMotherInner =  AliMUONConstants::Rmin(3)-kRframeHeight;
1377     Float_t nomexthickness = 1.5;
1378     Float_t carbonthickness = 0.03;
1379     Float_t supporthlength =  260.;
1380     Float_t supportvlength =  530.;
1381     // Generating the composite shape of the carbon and nomex pannels
1382     new TGeoBBox("shNomexBoxSt4",supporthlength/2., supportvlength/2. ,nomexthickness/2.+carbonthickness+3*kCableWidth);
1383     new TGeoBBox("shCarbonBoxSt4",supporthlength/2., supportvlength/2. ,carbonthickness/2.);
1384     new TGeoTubeSeg("shNomexHoleSt4",0., dMotherInner, nomexthickness/2.+carbonthickness+3*kCableWidth+0.001, -90. ,90.);
1385     new TGeoTubeSeg("shCarbonHoleSt4",0., dMotherInner, carbonthickness/2.+0.001, -90. ,90.);
1386     TGeoTranslation* trHoleSt4 = new TGeoTranslation("trHoleSt4",-supporthlength/2.,0.,0.);
1387     trHoleSt4->RegisterYourself();
1388     TGeoCompositeShape* shNomexSupportSt4  = new TGeoCompositeShape("shNomexSupportSt4","shNomexBoxSt4-shNomexHoleSt4:trHoleSt4");
1389     TGeoCompositeShape* shCarbonSupportSt4 = new TGeoCompositeShape("shCarbonSupportSt4","shCarbonBoxSt4-shCarbonHoleSt4:trHoleSt4");
1390
1391    // Generating Nomex and Carbon pannel volumes
1392     TGeoVolume* voNomexSupportSt4   = new TGeoVolume("S07S", shNomexSupportSt4, kMedNomex);
1393     TGeoVolume* voCarbonSupportSt4  = new TGeoVolume("S07K", shCarbonSupportSt4, kMedCarbon);
1394     TGeoVolume* voNomexSupportSt4Ch8   = new TGeoVolume("S08S", shNomexSupportSt4, kMedNomex);
1395     TGeoVolume* voCarbonSupportSt4Ch8  = new TGeoVolume("S08K", shCarbonSupportSt4, kMedCarbon);
1396     TGeoTranslation* trCarbon1St4   = new TGeoTranslation("trCarbon1St4",0.,0., -(nomexthickness+carbonthickness)/2.);
1397     TGeoTranslation* trCarbon2St4   = new TGeoTranslation("trCarbon2St4",0.,0.,  (nomexthickness+carbonthickness)/2.);
1398     voNomexSupportSt4->AddNode(voCarbonSupportSt4,1,trCarbon1St4);
1399     voNomexSupportSt4->AddNode(voCarbonSupportSt4,2,trCarbon2St4);
1400     voNomexSupportSt4Ch8->AddNode(voCarbonSupportSt4Ch8,1,trCarbon1St4);
1401     voNomexSupportSt4Ch8->AddNode(voCarbonSupportSt4Ch8,2,trCarbon2St4);
1402
1403     // Add readout cables
1404     gMC->Gsvolu("S07L","BOX",kCableMaterial,dum,0);
1405     gMC->Gsvolu("S08L","BOX",kCableMaterial,dum,0);
1406
1407     ySlat41 = 0.;
1408     ySlat42 = 0.;
1409     Float_t lCableX = 0.;
1410     Float_t lCableY = 0.;
1411     Float_t lCableY8 = 0.;
1412     Float_t lCableZ = 0.;
1413     Float_t cablepar[3] = {supporthlength/2., kCableHeight/2., kCableWidth/2.};
1414     Float_t lCableDY = 0.;
1415     Float_t lCableDY8 = 0.;
1416     for (i = 0; i<kNslats4; i++){
1417       Int_t iCable = 1;
1418       Int_t cIndex = 0;
1419       Int_t cIndex8 = 0;
1420       ySlat41 += kYpos41[i];
1421       ySlat42 += kYpos42[i];
1422
1423       lCableY = ySlat41;
1424       lCableY8 = ySlat42;
1425
1426       // Cables going out from the start of slat
1427       if(kNPCB4[i]>=4){ // Only if 4 or more pcb
1428         // First top cables
1429         cablepar[0] = (supporthlength-kXpos4[i])/2.;
1430         lCableX = kXpos4[i]/2.;
1431         lCableDY = (kYpos41[i+1]+kYpos41[i+2])/2.-cablepar[1];
1432         lCableDY8 = (kYpos42[i+1]+kYpos42[i+2])/2.-cablepar[1];
1433         lCableZ = TMath::Power(-1,i)*(nomexthickness/2.+carbonthickness+(-1+iCable++)*kCableWidth+kCableWidth/2.);
1434         gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
1435         gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
1436         gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,lCableY8+lCableDY8,lCableZ,0,"ONLY",cablepar,3);
1437         gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,-(lCableY8+lCableDY8),lCableZ,0,"ONLY",cablepar,3);
1438         // Then bottom cables
1439         if (i>0){
1440           if (i==1) { // Rounded slat. Bottom cable starts at dMotherInner (beam pipe)
1441             cablepar[0] = (supporthlength-kXpos4[i]-dMotherInner)/2.;
1442             lCableX = (kXpos4[i]+dMotherInner)/2.;
1443             lCableDY = (kYpos41[i]+kYpos41[i])/2.-cablepar[1];
1444             lCableDY8 = (kYpos42[i]+kYpos42[i])/2.-cablepar[1];
1445           }
1446           if (i>=2) {
1447             lCableDY = (kYpos41[i]+kYpos41[i-1])/2.-cablepar[1];
1448             if ((lCableY-lCableDY)<(dMotherInner+cablepar[1])){
1449               lCableDY = lCableY - dMotherInner - cablepar[1];
1450             }
1451             lCableDY8 = (kYpos42[i]+kYpos42[i-1])/2.-cablepar[1];
1452             if ((lCableY8-lCableDY8)<(dMotherInner+cablepar[1])){
1453               lCableDY8 = lCableY8 - dMotherInner - cablepar[1];
1454             }
1455           }
1456           gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar,3);
1457           gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar,3);
1458           gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,lCableY8-lCableDY8,lCableZ,0,"ONLY",cablepar,3);
1459           gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,-(lCableY8-lCableDY8),lCableZ,0,"ONLY",cablepar,3);
1460         }
1461       }
1462
1463       // Rounded slats have an extra cable starting at second pcb
1464       if(i==1){
1465         // Only on top
1466         cablepar[0] = (supporthlength-kPcbLength-kVframeLength)/2.;
1467         lCableX = (kPcbLength+kVframeLength)/2.;
1468         lCableDY = (kYpos41[i+1]+kYpos41[i+2])/2.-cablepar[1]; // half way between 2 slats on same side
1469         lCableDY8 = (kYpos42[i+1]+kYpos42[i+2])/2.-cablepar[1]; // half way between 2 slats on same side
1470         lCableZ = TMath::Power(-1,i)*(nomexthickness/2.+carbonthickness+(-1+iCable++)*kCableWidth+kCableWidth/2.);
1471         gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
1472         gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
1473         gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,lCableY8+lCableDY8,lCableZ,0,"ONLY",cablepar,3);
1474         gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,-(lCableY8+lCableDY8),lCableZ,0,"ONLY",cablepar,3);
1475       }
1476
1477       // Cables going out from the end of the slats
1478       cablepar[0] = (supporthlength-(slatLength4[i]+kXpos4[i]+kDslatLength)+kVframeLength)/2.;
1479       lCableX = slatLength4[i]+kXpos4[i]-kVframeLength+kDslatLength+cablepar[0]-supporthlength/2.;
1480       if(i+1>=kNslats4 || i+2>=kNslats4){ // If no more higher slats, then use distance to lower slat
1481         lCableDY = kPcbHeight/2.+cablepar[1];
1482         lCableDY8 = lCableDY;
1483       }
1484       else {
1485         lCableDY = (kYpos41[i+1]+kYpos41[i+2])/2.-cablepar[1];
1486         lCableDY8 = (kYpos42[i+1]+kYpos42[i+2])/2.-cablepar[1];
1487       }
1488       lCableZ = TMath::Power(-1,i)*(nomexthickness/2.+carbonthickness+(-1+iCable++)*kCableWidth+kCableWidth/2.);
1489       gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
1490       gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
1491       gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,lCableY8+lCableDY8,lCableZ,0,"ONLY",cablepar,3);
1492       gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,-(lCableY8+lCableDY8),lCableZ,0,"ONLY",cablepar,3);
1493       // Then bottom cables
1494       if(i>0){
1495         if (i==1) {
1496           lCableDY = (kYpos41[i]+kYpos41[i])/2.-cablepar[1];
1497           lCableDY8 = (kYpos42[i]+kYpos42[i])/2.-cablepar[1];
1498         }
1499         else{
1500           lCableDY = (kYpos41[i]+kYpos41[i-1])/2.-cablepar[1]; // half way between 2 slats on same side
1501           if ((lCableY-lCableDY)<(dMotherInner+cablepar[1])){
1502             lCableDY = lCableY - dMotherInner - cablepar[1];
1503           }
1504           lCableDY8 = (kYpos42[i]+kYpos42[i-1])/2.-cablepar[1]; // half way between 2 slats on same side
1505           if ((lCableY8-lCableDY8)<(dMotherInner+cablepar[1])){
1506             lCableDY8 = lCableY8 - dMotherInner - cablepar[1];
1507           }
1508         }
1509         gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar,3);
1510         gMC->Gsposp("S07L",10*i+cIndex++,"S07S",lCableX,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar,3);
1511         gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,lCableY8-lCableDY8,lCableZ,0,"ONLY",cablepar,3);
1512         gMC->Gsposp("S08L",10*i+cIndex8++,"S08S",lCableX,-(lCableY8-lCableDY8),lCableZ,0,"ONLY",cablepar,3);
1513       }
1514     }
1515
1516     Float_t dzCh7  = dzCh;
1517     TGeoTranslation* trSupport1St4   = new TGeoTranslation("trSupport1St4", supporthlength/2., 0. , dzCh7);
1518     TGeoRotation*    roSupportSt4    = new TGeoRotation("roSupportSt4",90.,180.,-90.);
1519     TGeoCombiTrans*  coSupport2St4   = new TGeoCombiTrans(-supporthlength/2., 0., -dzCh7, roSupportSt4);
1520     GetEnvelopes(9)->AddEnvelope("S07S", 0, 1, *trSupport1St4);
1521     GetEnvelopes(8)->AddEnvelope("S07S", 0, 2, *coSupport2St4);
1522     GetEnvelopes(11)->AddEnvelope("S08S", 0, 1, *trSupport1St4);
1523     GetEnvelopes(10)->AddEnvelope("S08S", 0, 2, *coSupport2St4);
1524
1525     // End of pannel support geometry
1526
1527     // cout << "Geometry for Station 4...... done" << endl;
1528
1529   }
1530
1531   if (fStations[4]) {
1532
1533
1534     // //********************************************************************
1535     // //                            Station 5                             **
1536     // //********************************************************************
1537     // Mother volume for each chamber in St4 is an envelop (or assembly)
1538     // There is one assembly mother per half a chamber  called SC09I, SC09O, SC10I and SC10O
1539     // Same volume name definitions as in St3
1540
1541     const Int_t   kNslats5         = 7;  // number of slats per quadrant
1542     const Int_t   kNPCB5[kNslats5] = {5, 6, 6, 6, 5, 4, 3}; // n PCB per slat
1543     const Float_t kXpos5[kNslats5] = {38.75, 0., 0., 0., 0., 0., 0.}; // J.C. Correct value
1544     const Float_t kYpos5[kNslats5] = {0., 38.2, 37.9, 37.6, 37.3, 37.05, 36.75};
1545     Float_t slatLength5[kNslats5];
1546
1547     Float_t rPhi1 = TMath::RadToDeg()*(TMath::ASin((kYpos5[1]-hFramepar[1])/(AliMUONConstants::Rmin(4))));
1548     Float_t rPhi2 = TMath::RadToDeg()*(TMath::ACos(-vFramepar[0]/(AliMUONConstants::Rmin(4)-kRframeLength)));
1549     Float_t rFramepar5[5] = { AliMUONConstants::Rmin(4)-kRframeLength, AliMUONConstants::Rmin(4), kRframeWidth, rPhi1, rPhi2};
1550     Float_t vrFrameHeight = hFramepar[1]+kYpos5[1]-AliMUONConstants::Rmin(4)+kRframeLength;
1551
1552     char idSlatCh9[6];
1553     char idSlatCh10[6];
1554     Float_t xSlat5;
1555     Float_t ySlat5 = 0;
1556     angle = 0.;
1557
1558     for (i = 0; i < kNslats5; i++){
1559
1560       slatLength5[i] = kPcbLength * kNPCB5[i] + 2.* kVframeLength;
1561       xSlat5 = slatLength5[i]/2. + kDslatLength + kXpos5[i];
1562       ySlat5 += kYpos5[i];
1563
1564       spar[0] = slatLength5[i]/2.;
1565       spar[1] = kSlatHeight/2.;
1566       spar[2] = kSlatWidth/2.;
1567
1568       Float_t dzCh5  = dzCh;
1569       Float_t zSlat5 = (i%2 ==0)? -zSlat : zSlat;
1570
1571       sprintf(idSlatCh9,"SLE%d",kNslats5-1+i);
1572       detElemId = 913 - (i + kNslats5-1-6);
1573       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1574       if (detElemId % 2 == 0)
1575           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5),
1576                                               TGeoRotation("rot1",90,angle,90,90+angle,0,0) );
1577       else
1578           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5),
1579                                               TGeoRotation("rot1",90,angle,90,270+angle,180,0) );
1580       sprintf(idSlatCh9,"SLE%d",3*kNslats5-2+i);
1581       detElemId = 900 + (i + kNslats5-1-6);
1582       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1583       if (detElemId % 2 == 0)
1584           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5),
1585                                               TGeoRotation("rot2",90,180+angle,90,270+angle,0,0) );
1586       else
1587           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5),
1588                                               TGeoRotation("rot2",90,180+angle,90,90+angle,180,0) );
1589       if (i > 0) {
1590         sprintf(idSlatCh9,"SLE%d",kNslats5-1-i);
1591         detElemId = 913 + (i + kNslats5-1-6);
1592         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1593       if (detElemId % 2 == 0  && detElemId != 914)
1594           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5),
1595                                      TGeoRotation("rot3",90,angle,90,90+angle,0,0) );
1596       else
1597           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5),
1598                                      TGeoRotation("rot3",90,angle,90,270+angle,180,0) );
1599         sprintf(idSlatCh9,"SLE%d",3*kNslats5-2-i);
1600         detElemId = 926 - (i + kNslats5-1-6);
1601         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1602         if (detElemId % 2 == 1 && detElemId != 925 )
1603             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5),
1604                                                 TGeoRotation("rot4",90,180+angle,90,90+angle,180,0)  );
1605         else
1606             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh9, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5),
1607                                                 TGeoRotation("rot4",90,180+angle,90,270+angle,0,0)  );
1608       }
1609
1610       sprintf(idSlatCh10,"SLF%d",kNslats5-1+i);
1611       detElemId = 1013 - (i + kNslats5-1-6);
1612       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1613       if (detElemId % 2 == 0)
1614           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5),
1615                                               TGeoRotation("rot5",90,angle,90,90+angle,0,0) );
1616       else
1617           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, ySlat5, -zSlat5 + dzCh5),
1618                                               TGeoRotation("rot5",90,angle,90,270+angle,180,0) );
1619
1620       sprintf(idSlatCh10,"SLF%d",3*kNslats5-2+i);
1621       detElemId = 1000 + (i + kNslats5-1-6);
1622       moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1623       if (detElemId % 2 == 0)
1624           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5),
1625                                               TGeoRotation("rot6",90,180+angle,90,270+angle,0,0) );
1626       else
1627           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, ySlat5, zSlat5 - dzCh5),
1628                                               TGeoRotation("rot6",90,180+angle,90,90+angle,180,0) );
1629       if (i > 0) {
1630         sprintf(idSlatCh10,"SLF%d",kNslats5-1-i);
1631         detElemId = 1013 + (i + kNslats5-1-6);
1632         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1633       if (detElemId % 2 == 0  && detElemId != 1014)
1634           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5),
1635                                      TGeoRotation("rot7",90,angle,90,90+angle,0,0) );
1636       else
1637           GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(xSlat5, -ySlat5, -zSlat5 + dzCh5),
1638                                      TGeoRotation("rot7",90,angle,90,270+angle,180,0) );
1639         sprintf(idSlatCh10,"SLF%d",3*kNslats5-2-i);
1640         detElemId = 1026 - (i + kNslats5-1-6);
1641         moduleId = AliMpDEManager::GetGeomModuleId(detElemId);
1642         if (detElemId % 2 == 1 && detElemId != 1025 )
1643             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5),
1644                                               TGeoRotation("rot8",90,180+angle,90,90+angle,180,0) );
1645         else
1646             GetEnvelopes(moduleId)->AddEnvelope(idSlatCh10, detElemId, true, TGeoTranslation(-xSlat5, -ySlat5, zSlat5 - dzCh5),
1647                                               TGeoRotation("rot8",90,180+angle,90,270+angle,0,0) );
1648       }
1649     }
1650
1651     // create the panel volume
1652
1653     gMC->Gsvolu("S09C","BOX",kCarbonMaterial,panelpar,3);
1654     gMC->Gsvolu("SD9C","BOX",kCarbonMaterial,panelpar,3);
1655     gMC->Gsvolu("S10C","BOX",kCarbonMaterial,panelpar,3);
1656     gMC->Gsvolu("SD0C","BOX",kCarbonMaterial,panelpar,3);
1657
1658     // create the nomex volume
1659
1660     gMC->Gsvolu("S09N","BOX",kNomexMaterial,nomexpar,3);
1661     gMC->Gsvolu("SD9N","BOX",kNomexMaterial,nomexpar,3);
1662     gMC->Gsvolu("S10N","BOX",kNomexMaterial,nomexpar,3);
1663     gMC->Gsvolu("SD0N","BOX",kNomexMaterial,nomexpar,3);
1664
1665
1666     // create the nomex volume (bulk)
1667
1668     gMC->Gsvolu("S09X","BOX",kNomexBMaterial,nomexbpar,3);
1669     gMC->Gsvolu("SD9X","BOX",kNomexBMaterial,nomexbpar,3);
1670     gMC->Gsvolu("S10X","BOX",kNomexBMaterial,nomexbpar,3);
1671     gMC->Gsvolu("SD0X","BOX",kNomexBMaterial,nomexbpar,3);
1672
1673     // create the insulating material volume
1674
1675     gMC->Gsvolu("S09I","BOX",kInsuMaterial,insupar,3);
1676     gMC->Gsvolu("SD9I","BOX",kInsuMaterial,insupar,3);
1677     gMC->Gsvolu("S10I","BOX",kInsuMaterial,insupar,3);
1678     gMC->Gsvolu("SD0I","BOX",kInsuMaterial,insupar,3);
1679
1680     // create the PCB volume
1681
1682     gMC->Gsvolu("S09P","BOX",kPcbMaterial,pcbpar,3);
1683     gMC->Gsvolu("SD9P","BOX",kPcbMaterial,pcbpar,3);
1684     gMC->Gsvolu("S10P","BOX",kPcbMaterial,pcbpar,3);
1685     gMC->Gsvolu("SD0P","BOX",kPcbMaterial,pcbpar,3);
1686
1687     // create the sensitive volumes,
1688
1689     gMC->Gsvolu("S09G","BOX",kSensMaterial,dum,0);
1690     gMC->Gsvolu("SD9G","BOX",kSensMaterial,senspar,3);
1691     gMC->Gsvolu("S10G","BOX",kSensMaterial,dum,0);
1692     gMC->Gsvolu("SD0G","BOX",kSensMaterial,senspar,3);
1693
1694     // create the vertical frame volume
1695
1696     gMC->Gsvolu("S09V","BOX",kVframeMaterial,vFramepar,3);
1697     gMC->Gsvolu("S10V","BOX",kVframeMaterial,vFramepar,3);
1698
1699     // create the rounded vertical frame volume
1700
1701     gMC->Gsvolu("SD9D","TUBS",kRframeMaterial,rFramepar5,5);
1702     gMC->Gsvolu("SD0D","TUBS",kRframeMaterial,rFramepar5,5);
1703
1704     // create the horizontal frame volume
1705
1706     gMC->Gsvolu("S09H","BOX",kHframeMaterial,hFramepar,3);
1707     gMC->Gsvolu("SD9H","BOX",kHframeMaterial,hFramepar,3);
1708     gMC->Gsvolu("S10H","BOX",kHframeMaterial,hFramepar,3);
1709     gMC->Gsvolu("SD0H","BOX",kHframeMaterial,hFramepar,3);
1710
1711     // create the horizontal border volume
1712
1713     gMC->Gsvolu("S09B","BOX",kBframeMaterial,bFramepar,3);
1714     gMC->Gsvolu("SD9B","BOX",kBframeMaterial,bFramepar,3);
1715     gMC->Gsvolu("S10B","BOX",kBframeMaterial,bFramepar,3);
1716     gMC->Gsvolu("SD0B","BOX",kBframeMaterial,bFramepar,3);
1717
1718     // Replace the volume shape with a composite shape
1719     // with substracted overlap with beam shield
1720     if ( gMC->IsRootGeometrySupported() ) {
1721
1722       // Get shape
1723       Int_t nSlatType = 1;
1724       Int_t nVol = 8;
1725       const char* slatType = "D"; // D: Rounde slat
1726       const char* volLetter = "CNXIPHBG";
1727       TString volName;
1728       TString compName;
1729       TString csName;
1730       TGeoVolume *mVol = 0x0;
1731       // Beam shield recess
1732       new TGeoTube("tube5Cut", 0., AliMUONConstants::Rmin(4), kSlatWidth/2.+0.001);
1733       TObjArray rounded5Slat(nSlatType*((nVol+1)*2));
1734       // Displacement
1735       TGeoTranslation* trDTube5 = new TGeoTranslation("trDTube5", -(kPcbLength+kVframeLength)/2., -kYpos5[1], 0.);
1736       trDTube5->RegisterYourself();
1737       TGeoTranslation* trDBTube5 = new TGeoTranslation("trDBTube5", 0., ( kPcbHeight - kBframeHeight ) / 2., 0.);
1738       trDBTube5->Add(trDTube5);
1739       trDBTube5->RegisterYourself();
1740
1741       TObjArray composite5(nSlatType*((nVol+1)*2));
1742       new TGeoBBox("box5DCut",(kPcbLength+kVframeLength)/2., hFramepar[1], vFramepar[2]+0.001);
1743       // Displacement
1744       TGeoTranslation* trDBox5 = new TGeoTranslation("trDBox5",kPcbLength/2., kYpos5[1], 0.);
1745       trDBox5->RegisterYourself();
1746
1747       TGeoBBox *box5Vframe = new TGeoBBox("box5Vframe",vFramepar[0],vrFrameHeight/2., vFramepar[2]);
1748       TGeoTranslation* trVBox5 = new TGeoTranslation("trVBox5", 0., AliMUONConstants::Rmin(4)-kRframeLength + box5Vframe->GetDY(), 0.);
1749       trVBox5->RegisterYourself();
1750
1751       for(int iCh=9; iCh<=10; iCh++){
1752         for (int iSlatType = 0; iSlatType<nSlatType; iSlatType++) {
1753           for (int iVol = 0; iVol<nVol; iVol++){
1754             Int_t lIndex = (iCh-9)*(nSlatType*(nVol+1))+iSlatType*(nVol+1)+iVol;
1755             volName=Form("S%c%d%c",slatType[iSlatType],iCh%10,volLetter[iVol]);
1756             mVol = gGeoManager->FindVolumeFast(volName);
1757             if ( !mVol ) {
1758               AliErrorStream()
1759                 << "Slat volume " << volName << " not found" << endl;
1760             }
1761             else {
1762               rounded5Slat[lIndex] = mVol->GetShape();
1763               csName=Form("rounded5Slat%c%d%c",slatType[iSlatType],iCh%10,volLetter[iVol]);
1764               ((TGeoShape*)rounded5Slat[lIndex])->SetName(csName);
1765
1766               // Composite shape
1767               TString compOperation(csName);
1768               compOperation+="-tube5Cut:tr";
1769               compOperation+=slatType[iSlatType];
1770               if (strstr(volName,"B")){
1771                 compOperation+="B";
1772               }
1773               compOperation+="Tube5";
1774               compName=Form("composite5%d%c",iCh,volLetter[iVol]);
1775               composite5[lIndex] = new TGeoCompositeShape(compName, compOperation.Data());
1776
1777               // Reset shape to volume
1778               mVol->SetShape((TGeoShape*)composite5[lIndex]);
1779             }
1780           }
1781
1782           // For rounded spacer
1783           Int_t lIndex = (iCh-9)*(nSlatType*(nVol+1))+iSlatType*(nVol+1)+nVol;
1784           volName=Form("S%c%dD",slatType[iSlatType],iCh%10);
1785           mVol = gGeoManager->FindVolumeFast(volName);
1786           if ( !mVol ) {
1787             AliErrorStream()
1788               << "Slat volume " << volName << " not found" << endl;
1789           }
1790           else {
1791             rounded5Slat[lIndex] = mVol->GetShape();
1792             csName=Form("rounded5Slat%c%dD",slatType[iSlatType],iCh%10);
1793             ((TGeoShape*)rounded5Slat[lIndex])->SetName(csName);
1794
1795             // Composite shape
1796             TString compOperation(csName);
1797             if (strstr(volName,"SD")){
1798               compOperation.Prepend("(");
1799               compOperation+="+box5Vframe:trVBox5)*box5DCut:trDBox5";
1800             }
1801             compName=Form("composite5%c%dD",slatType[iSlatType],iCh%10);
1802             composite5[lIndex] = new TGeoCompositeShape(compName, compOperation.Data());
1803             // Reset shape to volume
1804             mVol->SetShape((TGeoShape*)composite5[lIndex]);
1805           }
1806         }
1807       }
1808     }
1809
1810     index = 0;
1811     for (i = 0; i < kNslats5; i++){
1812       for (Int_t quadrant = 1; quadrant <= 4; quadrant++) {
1813
1814         if (i == 0 && quadrant == 2) continue;
1815         if (i == 0 && quadrant == 4) continue;
1816
1817         sprintf(idSlatCh9,"SLE%d",ConvertSlatNum(i,quadrant,kNslats5-1));
1818         sprintf(idSlatCh10,"SLF%d",ConvertSlatNum(i,quadrant,kNslats5-1));
1819         Int_t moduleSlatCh9 = GetModuleId(idSlatCh9);
1820         Int_t moduleSlatCh10 = GetModuleId(idSlatCh10);
1821         Float_t xvFrame  = (slatLength5[i] - kVframeLength)/2.; // ok
1822
1823         // position the vertical frames (spacers)
1824         if (i != 1) {
1825           GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1826           GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
1827           GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1828           GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,0.,0.));
1829         } else {  // Vertical and Rounded+Vertical spacer
1830           GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("S09V", idSlatCh9, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1831           GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("SD9D", idSlatCh9, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,-kYpos5[1],0.));
1832           GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("S10V", idSlatCh10, (2*i-1)*10+quadrant,TGeoTranslation(xvFrame,0.,0.));
1833           GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("SD0D", idSlatCh10, (2*i)*10+quadrant,TGeoTranslation(-xvFrame,-kYpos5[1],0.));
1834         }
1835
1836         // position the panels and the insulating material
1837         for (j = 0; j < kNPCB5[i]; j++){
1838           index++;
1839           xx = kSensLength * (-kNPCB5[i]/2.+j+.5);
1840
1841           Float_t zPanel = spar[2] - nomexbpar[2];
1842           if (i==1 && j==0){ // Rounded pcb of rounded slat
1843             GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("SD9X", idSlatCh9, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1844             GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("SD9X", idSlatCh9, 2*index,TGeoTranslation(xx,0.,-zPanel));
1845             GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("SD9I", idSlatCh9, index,TGeoTranslation(xx,0.,0.));
1846             GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("SD0X", idSlatCh10, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1847             GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("SD0X", idSlatCh10, 2*index,TGeoTranslation(xx,0.,-zPanel));
1848             GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("SD0I", idSlatCh10, index,TGeoTranslation(xx,0.,0.));
1849           } else {
1850             GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("S09X", idSlatCh9, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1851             GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("S09X", idSlatCh9, 2*index,TGeoTranslation(xx,0.,-zPanel));
1852             GetEnvelopes(moduleSlatCh9)->AddEnvelopeConstituent("S09I", idSlatCh9, index,TGeoTranslation(xx,0.,0.));
1853
1854             GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("S10X", idSlatCh10, 2*index-1,TGeoTranslation(xx,0.,zPanel));
1855             GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("S10X", idSlatCh10, 2*index,TGeoTranslation(xx,0.,-zPanel));
1856             GetEnvelopes(moduleSlatCh10)->AddEnvelopeConstituent("S10I", idSlatCh10, index,TGeoTranslation(xx,0.,0.));
1857           }
1858         }
1859       }
1860     }
1861
1862     // position the nomex volume inside the panel volume
1863     gMC->Gspos("S09N",1,"S09C",0.,0.,0.,0,"ONLY");
1864     gMC->Gspos("SD9N",1,"SD9C",0.,0.,0.,0,"ONLY");
1865     gMC->Gspos("S10N",1,"S10C",0.,0.,0.,0,"ONLY");
1866     gMC->Gspos("SD0N",1,"SD0C",0.,0.,0.,0,"ONLY");
1867
1868     // position panel  volume inside the bulk nomex material volume
1869     gMC->Gspos("S09C",1,"S09X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1870     gMC->Gspos("SD9C",1,"SD9X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1871     gMC->Gspos("S10C",1,"S10X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1872     gMC->Gspos("SD0C",1,"SD0X",0.,0.,kNomexBWidth/2.,0,"ONLY");
1873
1874     // position the PCB volume inside the insulating material volume
1875     gMC->Gspos("S09P",1,"S09I",0.,0.,0.,0,"ONLY");
1876     gMC->Gspos("SD9P",1,"SD9I",0.,0.,0.,0,"ONLY");
1877     gMC->Gspos("S10P",1,"S10I",0.,0.,0.,0,"ONLY");
1878     gMC->Gspos("SD0P",1,"SD0I",0.,0.,0.,0,"ONLY");
1879
1880     // position the horizontal frame volume inside the PCB volume
1881     gMC->Gspos("S09H",1,"S09P",0.,0.,0.,0,"ONLY");
1882     gMC->Gspos("SD9H",1,"SD9P",0.,0.,0.,0,"ONLY");
1883     gMC->Gspos("S10H",1,"S10P",0.,0.,0.,0,"ONLY");
1884     gMC->Gspos("SD0H",1,"SD0P",0.,0.,0.,0,"ONLY");
1885
1886     // position the sensitive volume inside the horizontal frame volume
1887     gMC->Gsposp("S09G",1,"S09H",0.,0.,0.,0,"ONLY",senspar,3);
1888     gMC->Gspos("SD9G",1,"SD9H",0.,0.,0.,0,"ONLY");
1889     gMC->Gsposp("S10G",1,"S10H",0.,0.,0.,0,"ONLY",senspar,3);
1890     gMC->Gspos("SD0G",1,"SD0H",0.,0.,0.,0,"ONLY");
1891
1892     // position the border volumes inside the PCB volume
1893     Float_t yborder = ( kPcbHeight - kBframeHeight ) / 2.;
1894     gMC->Gspos("S09B",1,"S09P",0., yborder,0.,0,"ONLY");
1895     gMC->Gspos("S09B",2,"S09P",0.,-yborder,0.,0,"ONLY");
1896     gMC->Gspos("S09B",1,"SD9P",0., yborder,0.,0,"ONLY");
1897     gMC->Gspos("SD9B",1,"SD9P",0.,-yborder,0.,0,"ONLY");
1898     gMC->Gspos("S10B",1,"S10P",0., yborder,0.,0,"ONLY");
1899     gMC->Gspos("S10B",2,"S10P",0.,-yborder,0.,0,"ONLY");
1900     gMC->Gspos("S10B",1,"SD0P",0., yborder,0.,0,"ONLY");
1901     gMC->Gspos("SD0B",1,"SD0P",0.,-yborder,0.,0,"ONLY");
1902
1903     //      // create the NULOC volume and position it in the horizontal frame
1904
1905     gMC->Gsvolu("S09E","BOX",kNulocMaterial,nulocpar,3);
1906     gMC->Gsvolu("S10E","BOX",kNulocMaterial,nulocpar,3);
1907     index = 0;
1908     Float_t rPhi3 = TMath::ASin((kYpos5[1]-kPcbHeight/2.)/AliMUONConstants::Rmin(4));
1909     Float_t xxmax4 = (AliMUONConstants::Rmin(4)*TMath::Cos(rPhi3)-kVframeLength/2.) - (kBframeLength - kNulocLength)/2.;
1910     for (xx = -xxmax; xx <= xxmax; xx += 2*kNulocLength) {
1911       index++;
1912       gMC->Gspos("S09E",2*index-1,"S09B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY");
1913       gMC->Gspos("S09E",2*index  ,"S09B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY");
1914       gMC->Gspos("S10E",2*index-1,"S10B", xx, 0.,-kBframeWidth/2. + kNulocWidth/2, 0, "ONLY");
1915       gMC->Gspos("S10E",2*index  ,"S10B", xx, 0., kBframeWidth/2. - kNulocWidth/2, 0, "ONLY");
1916     }
1917     if (xx > xxmax4 && xx< xxmax) {
1918       gMC->Gspos("S09E",2*index-1,"SD9B", xx, 0.,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
1919       gMC->Gspos("S09E",2*index  ,"SD9B", xx, 0., kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
1920       gMC->Gspos("S10E",2*index-1,"SD0B", xx, 0.,-kBframeWidth/2.+ kNulocWidth/2, 0, "ONLY");
1921       gMC->Gspos("S10E",2*index  ,"SD0B", xx, 0., kBframeWidth/2.- kNulocWidth/2, 0, "ONLY");
1922     }
1923
1924     //
1925     //Geometry of the support pannel Verticla length 5.7m, horizontal length 2.6m, internal radius  dMotherInner o SC09 and SC10  (F. Orsini, Saclay)
1926     //Carbon fiber of 0.3 mm thick (2 layers) and a central layer of Nomex of 15mm thick.
1927     Float_t dMotherInner =  AliMUONConstants::Rmin(4)-kRframeHeight;
1928     Float_t nomexthickness = 1.5;
1929     Float_t carbonthickness = 0.03;
1930     Float_t supporthlength =  260.;
1931     Float_t supportvlength =  570.;
1932     // Generating the composite shape of the carbon and nomex pannels
1933     new TGeoBBox("shNomexBoxSt5",supporthlength/2., supportvlength/2. ,nomexthickness/2.+carbonthickness+3*kCableWidth);
1934     new TGeoBBox("shCarbonBoxSt5",supporthlength/2., supportvlength/2. ,carbonthickness/2.);
1935     new TGeoTubeSeg("shNomexHoleSt5",0., dMotherInner, nomexthickness/2.+carbonthickness+3*kCableWidth+0.001, -90. ,90.);
1936     new TGeoTubeSeg("shCarbonHoleSt5",0., dMotherInner, carbonthickness/2.+0.001, -90. ,90.);
1937     TGeoTranslation* trHoleSt5 = new TGeoTranslation("trHoleSt5",-supporthlength/2.,0.,0.);
1938     trHoleSt5->RegisterYourself();
1939     TGeoCompositeShape* shNomexSupportSt5  = new TGeoCompositeShape("shNomexSupportSt5","shNomexBoxSt5-shNomexHoleSt5:trHoleSt5");
1940     TGeoCompositeShape* shCarbonSupportSt5 = new TGeoCompositeShape("shCarbonSupportSt5","shCarbonBoxSt5-shCarbonHoleSt5:trHoleSt5");
1941
1942    // Generating Nomex and Carbon pannel volumes
1943     TGeoVolume* voNomexSupportSt5  = new TGeoVolume("S09S", shNomexSupportSt5, kMedNomex);
1944     TGeoVolume* voCarbonSupportSt5 = new TGeoVolume("S09K", shCarbonSupportSt5, kMedCarbon);
1945     TGeoTranslation* trCarbon1St5   = new TGeoTranslation("trCarbon1St5",0.,0., -(nomexthickness+carbonthickness)/2.);
1946     TGeoTranslation* trCarbon2St5   = new TGeoTranslation("trCarbon2St5",0.,0.,  (nomexthickness+carbonthickness)/2.);
1947     voNomexSupportSt5->AddNode(voCarbonSupportSt5,1,trCarbon1St5);
1948     voNomexSupportSt5->AddNode(voCarbonSupportSt5,2,trCarbon2St5);
1949
1950     // Add readout cables
1951     gMC->Gsvolu("S09L","BOX",kCableMaterial,dum,0);
1952
1953     ySlat5 = 0.;
1954     Float_t lCableX = 0.;
1955     Float_t lCableY = 0.;
1956     Float_t lCableZ = 0.;
1957     Float_t cablepar[3] = {supporthlength/2., kCableHeight/2., kCableWidth/2.};
1958     Float_t lCableDY = 0.;
1959     for (i = 0; i<kNslats5; i++){
1960       Int_t iCable = 1;
1961       Int_t cIndex = 0;
1962       ySlat5 += kYpos5[i];
1963
1964       lCableY = ySlat5;
1965
1966       // Cables going out from the start of slat
1967       if(kNPCB5[i]>=4){ // Only if 4 or more pcb
1968         // First top cables
1969         cablepar[0] = (supporthlength-kXpos5[i])/2.;
1970         lCableX = kXpos5[i]/2.;
1971         if(i+1>=kNslats5 || i+2>=kNslats5){ // If no more higher slats, then use distance to lower slat
1972           lCableDY = (kYpos5[i]+kYpos5[i-1])/2.-cablepar[1];
1973         }
1974         else {
1975           lCableDY = (kYpos5[i+1]+kYpos5[i+2])/2.-cablepar[1];
1976         }
1977         lCableZ = TMath::Power(-1,i)*(nomexthickness/2.+carbonthickness+(-1+iCable++)*kCableWidth+kCableWidth/2.);
1978         gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
1979         gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
1980         // Then bottom cables
1981         if (i>0) {
1982           if (i==1) { // Rounded slat. Bottom cable starts at dMotherInner (beam pipe)
1983             cablepar[0] = (supporthlength-kXpos5[i]-dMotherInner)/2.;
1984             lCableX = (kXpos5[i]+dMotherInner)/2.;
1985             lCableDY = (kYpos5[i]+kYpos5[i])/2.-cablepar[1];
1986           }
1987           else {
1988             lCableDY = (kYpos5[i]+kYpos5[i-1])/2.-cablepar[1];
1989             if ((lCableY-lCableDY)<(dMotherInner+cablepar[1])){
1990               lCableDY = lCableY - dMotherInner - cablepar[1];
1991             }
1992           }
1993           gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar,3);
1994           gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar,3);
1995         }
1996       }
1997
1998       // Rounded slats have an extra cable starting at second pcb
1999       if(i==1){
2000         // Only on top
2001         cablepar[0] = (supporthlength-kPcbLength-kVframeLength)/2.;
2002         lCableX = (kPcbLength+kVframeLength)/2.;
2003         lCableDY = (kYpos5[i+1]+kYpos5[i+2])/2.-cablepar[1]; // half way between 2 slats on same side
2004         lCableZ = TMath::Power(-1,i)*(nomexthickness/2.+carbonthickness+(-1+iCable++)*kCableWidth+kCableWidth/2.);
2005         gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
2006         gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
2007       }
2008
2009       // Cables going out from the end of the slats
2010       // First top cables
2011       cablepar[0] = (supporthlength-(slatLength5[i]+kXpos5[i]+kDslatLength)+kVframeLength)/2.;
2012       lCableX = slatLength5[i]+kXpos5[i]-kVframeLength+kDslatLength+cablepar[0]-supporthlength/2.;
2013       if(i+1>=kNslats5 || i+2>=kNslats5){ // If no more higher slats, then use distance to lower slat
2014         lCableDY = (kYpos5[i]+kYpos5[i-1])/2.-cablepar[1];
2015       }
2016       else {
2017         lCableDY = (kYpos5[i+1]+kYpos5[i+2])/2.-cablepar[1];
2018       }
2019       lCableZ = TMath::Power(-1,i)*(nomexthickness/2.+carbonthickness+(-1+iCable++)*kCableWidth+kCableWidth/2.);
2020       gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,lCableY+lCableDY,lCableZ,0,"ONLY",cablepar,3);
2021       gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,-(lCableY+lCableDY),lCableZ,0,"ONLY",cablepar,3);
2022       if(i>0){
2023         if (i==1) { // Rounded slat. Bottom cable starts at dMotherInner (beam pipe)
2024           lCableDY = (kYpos5[i]+kYpos5[i])/2.-cablepar[1];
2025         }
2026         else {
2027           lCableDY = (kYpos5[i]+kYpos5[i-1])/2.-cablepar[1];
2028           if ((lCableY-lCableDY)<(dMotherInner+cablepar[1])){
2029               lCableDY = lCableY - dMotherInner - cablepar[1];
2030           }
2031         }
2032         gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,lCableY-lCableDY,lCableZ,0,"ONLY",cablepar,3);
2033         gMC->Gsposp("S09L",10*i+cIndex++,"S09S",lCableX,-(lCableY-lCableDY),lCableZ,0,"ONLY",cablepar,3);
2034       }
2035     }
2036
2037     Float_t dzCh9  = dzCh;
2038     TGeoTranslation* trSupport1St5   = new TGeoTranslation("trSupport1St5", supporthlength/2., 0. , dzCh9);
2039     TGeoRotation*    roSupportSt5    = new TGeoRotation("roSupportSt5",90.,180.,-90.);
2040     TGeoCombiTrans*  coSupport2St5   = new TGeoCombiTrans(-supporthlength/2., 0., -dzCh9, roSupportSt5);
2041     GetEnvelopes(13)->AddEnvelope("S09S", 0, 1, *trSupport1St5);
2042     GetEnvelopes(12)->AddEnvelope("S09S", 0, 2, *coSupport2St5);
2043     GetEnvelopes(15)->AddEnvelope("S09S", 0, 3, *trSupport1St5);
2044     GetEnvelopes(14)->AddEnvelope("S09S", 0, 4, *coSupport2St5);
2045
2046
2047     // End of pannel support geometry
2048
2049     // cout << "Geometry for Station 5...... done" << endl;
2050
2051   }
2052
2053   delete [] fStations;
2054
2055 }
2056
2057 //______________________________________________________________________________
2058 void AliMUONSlatGeometryBuilder::SetVolumes()
2059 {
2060 /// Defines the volumes for the station345 chambers.
2061
2062   if (gAlice->GetModule("DIPO")) {
2063     // if DIPO is preset, the whole station will be placed in DDIP volume
2064     SetMotherVolume(4, "DDIP");
2065     SetMotherVolume(5, "DDIP");
2066     SetMotherVolume(6, "DDIP");
2067     SetMotherVolume(7, "DDIP");
2068   }
2069   SetVolume(4, "SC05I", true);
2070   SetVolume(5, "SC05O", true);
2071   SetVolume(6, "SC06I", true);
2072   SetVolume(7, "SC06O", true);
2073
2074   if (gAlice->GetModule("SHIL")) {
2075     SetMotherVolume(8, "YOUT2");
2076     SetMotherVolume(9, "YOUT2");
2077     SetMotherVolume(10, "YOUT2");
2078     SetMotherVolume(11, "YOUT2");
2079     SetMotherVolume(12, "YOUT2");
2080     SetMotherVolume(13, "YOUT2");
2081     SetMotherVolume(14, "YOUT2");
2082     SetMotherVolume(15, "YOUT2");
2083   }
2084
2085   SetVolume( 8, "SC07I", true);
2086   SetVolume( 9, "SC07O", true);
2087   SetVolume(10, "SC08I", true);
2088   SetVolume(11, "SC08O", true);
2089   SetVolume(12, "SC09I", true);
2090   SetVolume(13, "SC09O", true);
2091   SetVolume(14, "SC10I", true);
2092   SetVolume(15, "SC10O", true);
2093 }
2094
2095
2096 //______________________________________________________________________________
2097 void AliMUONSlatGeometryBuilder::SetTransformations()
2098 {
2099 /// Defines the transformations for the station345 chambers.
2100
2101 // Stations 345 are not perpendicular to the beam axis
2102 // See AliMUONConstants class
2103   TGeoRotation st345inclination("rot99");
2104   st345inclination.RotateX(AliMUONConstants::St345Inclination());
2105
2106 // The rotation of the half-chamber is done with respect the center of the chamber.
2107 // the distance beween the roation axis and the chamber position is
2108 // AliMUONConstants::DzCh()+AliMUONConstants::DzSlat()
2109 // Therefore the position of the half-chamber has to be corrected by a traslation in Z and Y axis
2110   Double_t deltaY = (AliMUONConstants::DzCh()+AliMUONConstants::DzSlat())*
2111     TMath::Sin(AliMUONConstants::St345Inclination() * TMath::Pi()/180.);
2112   Double_t deltaZ = (AliMUONConstants::DzCh()+AliMUONConstants::DzSlat())*
2113     (1.-TMath::Cos(AliMUONConstants::St345Inclination() * TMath::Pi()/180.));
2114
2115
2116   Double_t zpos1= - AliMUONConstants::DefaultChamberZ(4);
2117   SetTransformation(4, TGeoTranslation(0., -deltaY, -deltaZ+zpos1), st345inclination);
2118   SetTransformation(5, TGeoTranslation(0.,  deltaY,  deltaZ+zpos1), st345inclination);
2119
2120   zpos1= - AliMUONConstants::DefaultChamberZ(5);
2121   SetTransformation(6, TGeoTranslation(0., -deltaY, -deltaZ+zpos1), st345inclination);
2122   SetTransformation(7, TGeoTranslation(0.,  deltaY,  deltaZ+zpos1), st345inclination);
2123
2124   zpos1 = - AliMUONConstants::DefaultChamberZ(6);
2125   SetTransformation(8, TGeoTranslation(0., -deltaY, -deltaZ+zpos1), st345inclination);
2126   SetTransformation(9, TGeoTranslation(0.,  deltaY,  deltaZ+zpos1), st345inclination);
2127
2128   zpos1 = - AliMUONConstants::DefaultChamberZ(7);
2129   SetTransformation(10, TGeoTranslation(0., -deltaY, -deltaZ+zpos1), st345inclination );
2130   SetTransformation(11, TGeoTranslation(0.,  deltaY,  deltaZ+zpos1), st345inclination );
2131
2132   zpos1 = - AliMUONConstants::DefaultChamberZ(8);
2133   SetTransformation(12, TGeoTranslation(0., -deltaY, -deltaZ+zpos1), st345inclination);
2134   SetTransformation(13, TGeoTranslation(0.,  deltaY,  deltaZ+zpos1), st345inclination);
2135
2136   zpos1 = - AliMUONConstants::DefaultChamberZ(9);
2137   SetTransformation(14, TGeoTranslation(0., -deltaY, -deltaZ+zpos1), st345inclination);
2138   SetTransformation(15, TGeoTranslation(0.,  deltaY,  deltaZ+zpos1), st345inclination);
2139
2140 }
2141
2142 //______________________________________________________________________________
2143 void AliMUONSlatGeometryBuilder::SetSensitiveVolumes()
2144 {
2145 /// Defines the sensitive volumes for slat stations chambers.
2146
2147   GetGeometry( 4)->SetSensitiveVolume("S05G");
2148   GetGeometry( 4)->SetSensitiveVolume("SC5G");
2149   GetGeometry( 4)->SetSensitiveVolume("SD5G");
2150   GetGeometry( 5)->SetSensitiveVolume("S05G");
2151   GetGeometry( 5)->SetSensitiveVolume("SC5G");
2152   GetGeometry( 5)->SetSensitiveVolume("SD5G");
2153   GetGeometry( 6)->SetSensitiveVolume("S06G");
2154   GetGeometry( 6)->SetSensitiveVolume("SC6G");
2155   GetGeometry( 6)->SetSensitiveVolume("SD6G");
2156   GetGeometry( 7)->SetSensitiveVolume("S06G");
2157   GetGeometry( 7)->SetSensitiveVolume("SC6G");
2158   GetGeometry( 7)->SetSensitiveVolume("SD6G");
2159   GetGeometry( 8)->SetSensitiveVolume("S07G");
2160   GetGeometry( 8)->SetSensitiveVolume("SD7G");
2161   GetGeometry( 9)->SetSensitiveVolume("S07G");
2162   GetGeometry( 9)->SetSensitiveVolume("SD7G");
2163   GetGeometry(10)->SetSensitiveVolume("S08G");
2164   GetGeometry(10)->SetSensitiveVolume("SD8G");
2165   GetGeometry(11)->SetSensitiveVolume("S08G");
2166   GetGeometry(11)->SetSensitiveVolume("SD8G");
2167   GetGeometry(12)->SetSensitiveVolume("S09G");
2168   GetGeometry(12)->SetSensitiveVolume("SD9G");
2169   GetGeometry(13)->SetSensitiveVolume("S09G");
2170   GetGeometry(13)->SetSensitiveVolume("SD9G");
2171   GetGeometry(14)->SetSensitiveVolume("S10G");
2172   GetGeometry(14)->SetSensitiveVolume("SD0G");
2173   GetGeometry(15)->SetSensitiveVolume("S10G");
2174   GetGeometry(15)->SetSensitiveVolume("SD0G");
2175 }
2176
2177 //______________________________________________________________________________
2178 Int_t  AliMUONSlatGeometryBuilder::ConvertSlatNum(Int_t numslat, Int_t quadnum, Int_t fspq) const
2179 {
2180 /// On-line function establishing the correspondance between numslat (the slat number on a particular quadrant (numslat->0....4 for St3))
2181 /// and slatnum (the slat number on the whole panel (slatnum->1...18 for St3)
2182   numslat += 1;
2183   if (quadnum==2 || quadnum==3)
2184     numslat += fspq;
2185   else
2186     numslat = fspq + 2-numslat;
2187   numslat -= 1;
2188
2189   if (quadnum==3 || quadnum==4) numslat += 2*fspq+1;
2190
2191   return numslat;
2192 }