]> git.uio.no Git - u/mrichter/AliRoot.git/blob - RALICE/AliSignal.cxx
Vertex reconstruction
[u/mrichter/AliRoot.git] / RALICE / AliSignal.cxx
1 /**************************************************************************
2  * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
3  *                                                                        *
4  * Author: The ALICE Off-line Project.                                    *
5  * Contributors are mentioned in the code where appropriate.              *
6  *                                                                        *
7  * Permission to use, copy, modify and distribute this software and its   *
8  * documentation strictly for non-commercial purposes is hereby granted   *
9  * without fee, provided that the above copyright notice appears in all   *
10  * copies and that both the copyright notice and this permission notice   *
11  * appear in the supporting documentation. The authors make no claims     *
12  * about the suitability of this software for any purpose. It is          *
13  * provided "as is" without express or implied warranty.                  *
14  **************************************************************************/
15
16 /*
17 $Log$
18 Revision 1.2  1999/09/29 09:24:28  fca
19 Introduction of the Copyright and cvs Log
20
21 */
22
23 ///////////////////////////////////////////////////////////////////////////
24 // Class AliSignal
25 // Handling of ALICE (extrapolated) signals.
26 //
27 // Note :
28 // ------
29 // Signal positions (r) and reference frames (f) are specified via
30 // SetPosition(r,f) under the following conventions :
31 //
32 // f="car" ==> r is Cartesian   (x,y,z)
33 // f="sph" ==> r is Spherical   (r,theta,phi)
34 // f="cyl" ==> r is Cylindrical (rho,phi,z)
35 //
36 // The same holds for SetPositionErrors().
37 //
38 // All angles are in radians.
39 //
40 // Example :
41 // ---------
42 //
43 // AliSignal s;
44 // Float_t pos[3]={-1,25,7};
45 // Float_t err[3]={0.03,0.7,0.18};
46 // Float_t signal=120.8;
47 // Float_t error=1.73;
48 // s.SetPosition(pos,"car");
49 // s.SetPositionErrors(err,"car");
50 // s.SetSignal(signal);
51 // s.SetSignalError(error);
52 // Float_t loc[3],dr[3],sigma;
53 // s.GetPosition(loc,"sph");
54 // s.GetPositionErrors(dr,"sph");
55 // Float_t adc=s.GetSignal();
56 // Float_t sigma=s.GetSignalError();
57 //
58 // AliSignal q(3); // q can store 3 signal values with their errors
59 //                 // In the example below a signal contains the
60 //                 // following data : timing, ADC and dE/dx
61 // q.SetPosition(pos,"car");
62 // q.SetPositionErrors(err,"car");
63 // signal=82.5; // e.q. signal time in ns
64 // error=2.01;
65 // q.SetSignal(signal,1);
66 // q.SetSignalError(error,1);
67 // signal=268.1; // e.g. ADC value of signal
68 // error=3.75;
69 // q.SetSignal(signal,2);
70 // q.SetSignalError(error,2);
71 // signal=23.7; // e.g. corresponding dE/dx value
72 // error=0.48;
73 // q.SetSignal(signal,3);
74 // q.SetSignalError(error,3);
75 //
76 //--- Author: Nick van Eijndhoven 23-jan-1999 UU-SAP Utrecht
77 //- Modified: NvE 30-oct-1999 UU-SAP Utrecht
78 ///////////////////////////////////////////////////////////////////////////
79
80 #include "AliSignal.h"
81  
82 ClassImp(AliSignal) // Class implementation to enable ROOT I/O
83  
84 AliSignal::AliSignal(Int_t n)
85 {
86 // Creation of an AliSignal object and initialisation of parameters.
87 // A total of n (default n=1) values (with errors) can be stored.
88  fNvalues=n;
89  fSignal=0;
90  fDsignal=0;
91 }
92 ///////////////////////////////////////////////////////////////////////////
93 AliSignal::~AliSignal()
94 {
95 // Destructor to delete dynamically allocated memory
96  if (fSignal)
97  {
98   delete fSignal;
99   fSignal=0;
100  }
101  if (fDsignal)
102  {
103   delete fDsignal;
104   fDsignal=0;
105  }
106 }
107 ///////////////////////////////////////////////////////////////////////////
108 void AliSignal::Reset()
109 {
110 // Reset all signal and position values and errors to 0.
111 // The data arrays are also created if not already existing.
112
113  if (!fSignal) fSignal=new TArrayF(fNvalues);
114  if (!fDsignal) fDsignal=new TArrayF(fNvalues);
115
116  Double_t r[3]={0,0,0};
117  SetPosition(r,"sph");
118  SetErrors(r,"car");
119  for (Int_t i=0; i<fSignal->GetSize(); i++)
120  {
121   fSignal->AddAt(0,i);
122   fDsignal->AddAt(0,i);
123  }
124 }
125 ///////////////////////////////////////////////////////////////////////////
126 void AliSignal::ResetSignals()
127 {
128 // Reset all signal values and errors to 0.
129 // The data arrays are also created if not already existing.
130
131  if (!fSignal) fSignal=new TArrayF(fNvalues);
132  if (!fDsignal) fDsignal=new TArrayF(fNvalues);
133
134  for (Int_t i=0; i<fSignal->GetSize(); i++)
135  {
136   fSignal->AddAt(0,i);
137   fDsignal->AddAt(0,i);
138  }
139 }
140 ///////////////////////////////////////////////////////////////////////////
141 void AliSignal::ResetPosition()
142 {
143 // Reset position and errors to 0.
144  Double_t r[3]={0,0,0};
145  SetPosition(r,"sph");
146  SetErrors(r,"car");
147 }
148 ///////////////////////////////////////////////////////////////////////////
149 void AliSignal::SetSignal(Double_t sig,Int_t j)
150 {
151 // Store j-th (default j=1) signal value.
152 // Note : The first signal value is at j=1.
153
154  if (!fSignal) ResetSignals();
155
156  Int_t size=fSignal->GetSize();
157  if (j<=size)
158  {
159   fSignal->AddAt(float(sig),j-1);
160  }
161  else
162  {
163   cout << "*AliSignal::SetSignal* Index mismatch j : " << j
164        << " size : " << size << endl;
165  }
166 }
167 ///////////////////////////////////////////////////////////////////////////
168 void AliSignal::AddSignal(Double_t sig,Int_t j)
169 {
170 // Add value to j-th (default j=1) signal value.
171 // Note : The first signal value is at j=1.
172
173  if (!fSignal) ResetSignals();
174
175  Int_t size=fSignal->GetSize();
176  if (j<=size)
177  {
178   Float_t sum=(fSignal->At(j-1))+sig;
179   fSignal->AddAt(sum,j-1);
180  }
181  else
182  {
183   cout << "*AliSignal::AddSignal* Index mismatch j : " << j
184        << " size : " << size << endl;
185  }
186 }
187 ///////////////////////////////////////////////////////////////////////////
188 Float_t AliSignal::GetSignal(Int_t j)
189 {
190 // Provide j-th (default j=1) signal value.
191 // Note : The first signal value is at j=1.
192  if (fSignal)
193  {
194   return fSignal->At(j-1);
195  }
196  else
197  {
198   return 0;
199  }
200 }
201 ///////////////////////////////////////////////////////////////////////////
202 void AliSignal::SetSignalError(Double_t dsig,Int_t j)
203 {
204 // Store error on j-th (default j=1) signal value.
205 // Note : The error on the first signal value is at j=1.
206
207  if (!fDsignal) ResetSignals();
208
209  Int_t size=fDsignal->GetSize();
210  if (j<=size)
211  {
212   fDsignal->AddAt(float(dsig),j-1);
213  }
214  else
215  {
216   cout << "*AliSignal::SetSignalError* Index mismatch j : " << j
217        << " size : " << size << endl;
218  }
219 }
220 ///////////////////////////////////////////////////////////////////////////
221 Float_t AliSignal::GetSignalError(Int_t j)
222 {
223 // Provide error on the j-th (default j=1) signal value.
224 // Note : The error on the first signal value is at j=1.
225  if (fDsignal)
226  {
227   return fDsignal->At(j-1);
228  }
229  else
230  {
231   return 0;
232  }
233 }
234 ///////////////////////////////////////////////////////////////////////////
235 void AliSignal::Info(TString f)
236 {
237 // Provide signal information within the coordinate frame f
238  cout << " *AliSignal::Info* " << endl;
239  cout << " Position";
240  Ali3Vector::Info(f); 
241  
242  if (fSignal && fDsignal)
243  {
244   for (Int_t i=0; i<fSignal->GetSize(); i++)
245   {
246    cout << "   Signal value : " << fSignal->At(i)
247         << " error : " << fDsignal->At(i) << endl;
248   }
249  }
250
251 ///////////////////////////////////////////////////////////////////////////