1 /**************************************************************************
2 * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. *
4 * Author: The ALICE Off-line Project. *
5 * Contributors are mentioned in the code where appropriate. *
7 * Permission to use, copy, modify and distribute this software and its *
8 * documentation strictly for non-commercial purposes is hereby granted *
9 * without fee, provided that the above copyright notice appears in all *
10 * copies and that both the copyright notice and this permission notice *
11 * appear in the supporting documentation. The authors make no claims *
12 * about the suitability of this software for any purpose. It is *
13 * provided "as is" without express or implied warranty. *
14 **************************************************************************/
17 $Log: AliT0Preprocessor.cxx,v $
18 Revision 1.8 2007/12/07 15:22:51 alla
21 Revision 1.7 2007/12/06 16:35:24 alla
22 new bugs fixed by Tomek
24 Revision 1.5 2007/11/23 19:28:52 alla
27 Version 2.1 2007/11/21
28 Preprocessor storing data to OCDB (T.Malkiewicz)
31 Preliminary test version (T.Malkiewicz)
34 // 1) takes data from DCS and passes it to the class AliTOFDataDCS
35 // for processing and writes the result to the Reference DB.
36 // 2) takes data form DAQ (both from Laser Calibration and Physics runs),
37 // processes it, and stores either to OCDB or to Reference DB.
40 #include "AliT0Preprocessor.h"
41 #include "AliT0DataDCS.h"
42 #include "AliT0CalibWalk.h"
43 #include "AliT0CalibTimeEq.h"
45 #include "AliCDBMetaData.h"
46 #include "AliDCSValue.h"
47 #include "AliCDBEntry.h"
50 #include <TTimeStamp.h>
52 #include <TObjString.h>
54 #include "AliT0Dqclass.h"
58 ClassImp(AliT0Preprocessor)
60 //____________________________________________________
61 AliT0Preprocessor::AliT0Preprocessor(AliShuttleInterface* shuttle) :
62 AliPreprocessor("T00", shuttle),
66 AddRunType("PHYSICS");
67 AddRunType("STANDALONE");
68 AddRunType("AMPLITUDE_CALIBRATION");
70 //____________________________________________________
72 AliT0Preprocessor::~AliT0Preprocessor()
78 //____________________________________________________
80 void AliT0Preprocessor::Initialize(Int_t run, UInt_t startTime, UInt_t endTime)
82 // Creates AliT0DataDCS object
83 AliPreprocessor::Initialize(run, startTime, endTime);
84 AliInfo(Form("\n\tRun %d \n\tStartTime %s \n\tEndTime %s", run, TTimeStamp(startTime).AsString(), TTimeStamp(endTime).AsString()));
85 fData = new AliT0DataDCS(fRun, fStartTime, fEndTime, GetStartTimeDCSQuery(), GetEndTimeDCSQuery());
87 //____________________________________________________
89 Bool_t AliT0Preprocessor::ProcessDCS(){
90 // Check whether DCS should be processed or not...
91 TString runType = GetRunType();
92 Log(Form("ProcessDCS - RunType: %s",runType.Data()));
94 if((runType == "STANDALONE")||
95 (runType == "PHYSICS") ){
103 //____________________________________________________
105 UInt_t AliT0Preprocessor::ProcessDCSDataPoints(TMap* dcsAliasMap){
106 // Fills data into AliT0DataDCS object
107 Log("Processing DCS DP");
108 Bool_t resultDCSMap=kFALSE;
109 Bool_t resultDCSStore=kFALSE;
113 Log("No DCS input data");
118 resultDCSMap=fData->ProcessData(*dcsAliasMap);
121 Log("Error when processing DCS data");
122 return 2;// return error Code for processed DCS data not stored
126 AliCDBMetaData metaDataDCS;
127 metaDataDCS.SetBeamPeriod(0);
128 metaDataDCS.SetResponsible("Tomasz Malkiewicz");
129 metaDataDCS.SetComment("This preprocessor fills an AliTODataDCS object.");
130 AliInfo("Storing DCS Data");
131 resultDCSStore = StoreReferenceData("Calib","DCSData",fData, &metaDataDCS);
134 Log("Some problems occurred while storing DCS data results in ReferenceDB");
135 return 2;// return error Code for processed DCS data not stored
141 //____________________________________________________
143 UInt_t AliT0Preprocessor::ProcessLaser()
145 // Processing data from DAQ Standalone run
146 Log("Processing Laser calibration - Walk Correction");
147 Bool_t resultLaser = kFALSE;
148 Bool_t writeok = kFALSE;
150 TList* list = GetFileSources(kDAQ, "AMPLITUDE_CALIBRATION");
151 AliT0CalibWalk *laser = new AliT0CalibWalk();
156 while ((source = dynamic_cast<TObjString *> (iter.Next())))
158 const char *laserFile = GetFile(kDAQ, "AMPLITUDE_CALIBRATION", source->GetName());
161 Log(Form("File with Id AMPLITUDE_CALIBRAION found in source %s!", source->GetName()));
162 writeok = laser->MakeWalkCorrGraph(laserFile);
167 AliCDBMetaData metaData;
168 metaData.SetBeamPeriod(0);
169 metaData.SetResponsible("Tomek&Michal");
170 metaData.SetComment("Walk correction from laser runs.");
171 if (writeok) resultLaser=Store("Calib","Slewing_Walk", laser, &metaData, 0, 1);
174 Log(Form("writeok = %d no peaks in CFD spectra",writeok));
177 Log(Form("resultLaser = %d",resultLaser));
180 Log("No Laser Data stored");
181 return 3;//return error code for failure in storing Laser Data
186 Log(Form("Could not find file with Id AMPLITUDE_CALIBRAION "));
193 //____________________________________________________
195 UInt_t AliT0Preprocessor::ProcessPhysics(){
196 //Processing data from DAQ Physics run
197 Log("Processing Physics");
199 Bool_t resultOnline=kFALSE;
201 TList* listPhys = GetFileSources(kDAQ, "PHYSICS");
204 TIter iter(listPhys);
205 TObjString *sourcePhys;
206 while ((sourcePhys = dynamic_cast<TObjString *> (iter.Next())))
208 const char *filePhys = GetFile(kDAQ, "PHYSICS", sourcePhys->GetName());
211 AliT0CalibTimeEq *online = new AliT0CalibTimeEq();
213 Bool_t writeok = online->ComputeOnlineParams(filePhys);
214 AliCDBMetaData metaData;
215 metaData.SetBeamPeriod(0);
216 metaData.SetResponsible("Alla Maevskaya");
217 metaData.SetComment("Time equalizing result.");
219 if (writeok) resultOnline = Store("Calib","TimeDelay", online, &metaData, 0, 1);
222 Log(Form("writeok = %d not enough data for equalizing",resultOnline));
225 Log(Form("resultOnline = %d",resultOnline));
230 Log(Form("Could not find file with Id PHYSICS in source %s!", sourcePhys->GetName()));
237 Log("No Data stored");
238 return 4;//return error code for failure in storing OCDB Data
241 Log("No sources found for id PHYSICS!");
246 //____________________________________________________
248 UInt_t AliT0Preprocessor::Process(TMap* dcsAliasMap )
250 // T0 preprocessor return codes:
252 // return=1 : no DCS input data
253 // return=2 : failed to store DCS data
254 // return=3 : no Laser data (Walk correction)
255 // return=4 : failed to store OCDB time equalized data
256 // return=5 : no DAQ input for OCDB
257 // return=6 : failed to retrieve DAQ data from OCDB
258 // return=7 : failed to store T0 OCDB data
259 // return=8 : not enough data for equalizing
260 Bool_t dcsDP = ProcessDCS();
261 Log(Form("dcsDP = %d",dcsDP));
262 TString runType = GetRunType();
263 Log(Form("RunType: %s",runType.Data()));
265 if(runType == "STANDALONE"){
267 Int_t iresultDCS = ProcessDCSDataPoints(dcsAliasMap);
272 if(runType == "AMPLITUDE_CALIBRATION"){
273 Int_t iresultLaser = ProcessLaser();
275 Int_t iresultDCS = ProcessDCSDataPoints(dcsAliasMap);
279 Log(Form("iresultLaser = %d",iresultLaser));
283 else if(runType == "PHYSICS"){
284 Int_t iresultPhysics = ProcessPhysics();
286 Int_t iresultDCS = ProcessDCSDataPoints(dcsAliasMap);
289 Log(Form("iresultPhysics = %d",iresultPhysics));
290 return iresultPhysics;