]>
Commit | Line | Data |
---|---|---|
c4561145 | 1 | /*************************************************************************** |
2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * | |
3 | * * | |
4 | * Author: The ALICE Off-line Project. * | |
5 | * Contributors are mentioned in the code where appropriate. * | |
6 | * * | |
7 | * Permission to use, copy, modify and distribute this software and its * | |
8 | * documentation strictly for non-commercial purposes is hereby granted * | |
9 | * without fee, provided that the above copyright notice appears in all * | |
10 | * copies and that both the copyright notice and this permission notice * | |
11 | * appear in the supporting documentation. The authors make no claims * | |
12 | * about the suitability of this software for any purpose. It is * | |
13 | * provided "as is" without express or implied warranty. * | |
14 | **************************************************************************/ | |
d49fe99a | 15 | /* $Id$ */ |
fe9578d7 | 16 | |
c4561145 | 17 | // |
18 | /////////////////////////////////////////////////////////////////////////////// | |
19 | // // | |
20 | // Photon Multiplicity Detector Version 1 // | |
f117e3aa | 21 | // Bedanga Mohanty : February 14th 2006 |
c4561145 | 22 | // // |
23 | //Begin_Html | |
24 | /* | |
25 | <img src="picts/AliPMDv1Class.gif"> | |
26 | */ | |
27 | //End_Html | |
28 | // // | |
29 | /////////////////////////////////////////////////////////////////////////////// | |
30 | //// | |
31 | ||
788c3ee6 | 32 | #include "Riostream.h" |
33 | #include <TVirtualMC.h> | |
bff3a244 | 34 | |
35 | #include "AliConst.h" | |
4951e003 | 36 | #include "AliLog.h" |
bff3a244 | 37 | #include "AliMC.h" |
38 | #include "AliMagF.h" | |
39 | #include "AliPMDv1.h" | |
40 | #include "AliRun.h" | |
c4561145 | 41 | |
5c3a1290 | 42 | const Int_t AliPMDv1::fgkNcolUM1 = 48; // Number of cols in UM, type 1 |
43 | const Int_t AliPMDv1::fgkNcolUM2 = 96; // Number of cols in UM, type 2 | |
44 | const Int_t AliPMDv1::fgkNrowUM1 = 96; // Number of rows in UM, type 1 | |
45 | const Int_t AliPMDv1::fgkNrowUM2 = 48; // Number of rows in UM, type 2 | |
46 | const Float_t AliPMDv1::fgkCellRadius = 0.25; // Radius of a hexagonal cell | |
47 | const Float_t AliPMDv1::fgkCellWall = 0.02; // Thickness of cell Wall | |
48 | const Float_t AliPMDv1::fgkCellDepth = 0.50; // Gas thickness | |
f117e3aa | 49 | const Float_t AliPMDv1::fgkThBase = 0.2; // Thickness of Base plate |
50 | const Float_t AliPMDv1::fgkThBKP = 0.1; // Thickness of Back plane | |
51 | const Float_t AliPMDv1::fgkThAir = 1.03; // Thickness of Air | |
5c3a1290 | 52 | const Float_t AliPMDv1::fgkThPCB = 0.16; // Thickness of PCB |
53 | const Float_t AliPMDv1::fgkThLead = 1.5; // Thickness of Pb | |
54 | const Float_t AliPMDv1::fgkThSteel = 0.5; // Thickness of Steel | |
55 | const Float_t AliPMDv1::fgkGap = 0.025; // Air Gap | |
56 | const Float_t AliPMDv1::fgkZdist = 361.5; // z-position of the detector | |
57 | const Float_t AliPMDv1::fgkSqroot3 = 1.7320508;// Square Root of 3 | |
58 | const Float_t AliPMDv1::fgkSqroot3by2 = 0.8660254;// Square Root of 3 by 2 | |
f117e3aa | 59 | const Float_t AliPMDv1::fgkSSBoundary = 0.3; |
60 | const Float_t AliPMDv1::fgkThSS = 1.03; | |
61 | const Float_t AliPMDv1::fgkThG10 = 1.03; | |
c4561145 | 62 | ClassImp(AliPMDv1) |
63 | ||
a48edddd | 64 | //_____________________________________________________________________________ |
65 | AliPMDv1::AliPMDv1(): | |
66 | fSMthick(0.), | |
67 | fDthick(0.), | |
68 | fSMLengthax(0.), | |
69 | fSMLengthay(0.), | |
70 | fSMLengthbx(0.), | |
71 | fSMLengthby(0.), | |
72 | fMedSens(0) | |
c4561145 | 73 | { |
74 | // | |
75 | // Default constructor | |
76 | // | |
a48edddd | 77 | for (Int_t i = 0; i < 3; i++) |
78 | { | |
79 | fDboxmm1[i] = 0.; | |
80 | fDboxmm12[i] = 0.; | |
81 | fDboxmm2[i] = 0.; | |
82 | fDboxmm22[i] = 0.; | |
83 | } | |
c4561145 | 84 | } |
85 | ||
86 | //_____________________________________________________________________________ | |
a48edddd | 87 | AliPMDv1::AliPMDv1(const char *name, const char *title): |
88 | AliPMD(name,title), | |
89 | fSMthick(0.), | |
90 | fDthick(0.), | |
91 | fSMLengthax(0.), | |
92 | fSMLengthay(0.), | |
93 | fSMLengthbx(0.), | |
94 | fSMLengthby(0.), | |
95 | fMedSens(0) | |
c4561145 | 96 | { |
97 | // | |
98 | // Standard constructor | |
99 | // | |
a48edddd | 100 | for (Int_t i = 0; i < 3; i++) |
101 | { | |
102 | fDboxmm1[i] = 0.; | |
103 | fDboxmm12[i] = 0.; | |
104 | fDboxmm2[i] = 0.; | |
105 | fDboxmm22[i] = 0.; | |
106 | } | |
c4561145 | 107 | } |
108 | ||
109 | //_____________________________________________________________________________ | |
110 | void AliPMDv1::CreateGeometry() | |
111 | { | |
b1952773 | 112 | // Create geometry for Photon Multiplicity Detector |
113 | ||
c4561145 | 114 | GetParameters(); |
115 | CreateSupermodule(); | |
116 | CreatePMD(); | |
117 | } | |
118 | ||
119 | //_____________________________________________________________________________ | |
120 | void AliPMDv1::CreateSupermodule() | |
121 | { | |
b1952773 | 122 | // |
123 | // Creates the geometry of the cells of PMD, places them in supermodule | |
124 | // which is a rectangular object. | |
125 | // Basic unit is ECAR, a hexagonal cell made of Ar+CO2, which is | |
126 | // placed inside another hexagonal cell made of Cu (ECCU) with larger | |
127 | // radius, compared to ECAR. The difference in radius gives the dimension | |
128 | // of half width of each cell wall. | |
129 | // These cells are placed in a rectangular strip which are of 2 types | |
130 | // EST1 and EST2 | |
131 | // 2 types of unit modules are made EUM1 and EUM2 which contains these strips | |
132 | // placed repeatedly | |
133 | // Each supermodule (ESMA, ESMB), made of G10 is filled with following | |
f117e3aa | 134 | //components. They have 6 unit moudles inside them |
b1952773 | 135 | // ESMA, ESMB are placed in EPMD along with EMPB (Pb converter) |
c4561145 | 136 | // and EMFE (iron support) |
137 | ||
c4561145 | 138 | |
b1952773 | 139 | Int_t i,j; |
c4561145 | 140 | Int_t number; |
141 | Int_t ihrotm,irotdm; | |
3cdb4e97 | 142 | Float_t xb, yb, zb; |
143 | ||
c4561145 | 144 | Int_t *idtmed = fIdtmed->GetArray()-599; |
145 | ||
146 | AliMatrix(ihrotm, 90., 30., 90., 120., 0., 0.); | |
147 | AliMatrix(irotdm, 90., 180., 90., 270., 180., 0.); | |
148 | ||
f117e3aa | 149 | // STEP - I |
150 | //******************************************************// | |
b1952773 | 151 | // First create the sensitive medium of a hexagon cell (ECAR) |
c4561145 | 152 | // Inner hexagon filled with gas (Ar+CO2) |
b1952773 | 153 | |
c4561145 | 154 | Float_t hexd2[10] = {0.,360.,6,2,-0.25,0.,0.23,0.25,0.,0.23}; |
3cdb4e97 | 155 | hexd2[4] = -fgkCellDepth/2.; |
156 | hexd2[7] = fgkCellDepth/2.; | |
157 | hexd2[6] = fgkCellRadius - fgkCellWall; | |
158 | hexd2[9] = fgkCellRadius - fgkCellWall; | |
c4561145 | 159 | |
160 | gMC->Gsvolu("ECAR", "PGON", idtmed[604], hexd2,10); | |
f117e3aa | 161 | //******************************************************// |
162 | ||
163 | // STEP - II | |
164 | //******************************************************// | |
b1952773 | 165 | // Place the sensitive medium inside a hexagon copper cell (ECCU) |
c4561145 | 166 | // Outer hexagon made of Copper |
b1952773 | 167 | |
c4561145 | 168 | Float_t hexd1[10] = {0.,360.,6,2,-0.25,0.,0.25,0.25,0.,0.25}; |
3cdb4e97 | 169 | hexd1[4] = -fgkCellDepth/2.; |
170 | hexd1[7] = fgkCellDepth/2.; | |
171 | hexd1[6] = fgkCellRadius; | |
172 | hexd1[9] = fgkCellRadius; | |
c4561145 | 173 | |
174 | gMC->Gsvolu("ECCU", "PGON", idtmed[614], hexd1,10); | |
c4561145 | 175 | |
b1952773 | 176 | // Place inner hex (sensitive volume) inside outer hex (copper) |
177 | ||
a978c9e3 | 178 | gMC->Gspos("ECAR", 1, "ECCU", 0., 0., 0., 0, "ONLY"); |
f117e3aa | 179 | //******************************************************// |
180 | ||
181 | // STEP - III | |
182 | //******************************************************// | |
b1952773 | 183 | // Now create Rectangular TWO strips (EST1, EST2) |
184 | // of 1 column and 48 or 96 cells length | |
c4561145 | 185 | |
b1952773 | 186 | // volume for first strip EST1 made of AIR |
c4561145 | 187 | |
b1952773 | 188 | Float_t dbox1[3]; |
f117e3aa | 189 | dbox1[0] = fgkCellRadius/fgkSqroot3by2; |
190 | dbox1[1] = fgkNrowUM1*fgkCellRadius; | |
3cdb4e97 | 191 | dbox1[2] = fgkCellDepth/2.; |
b1952773 | 192 | |
193 | gMC->Gsvolu("EST1","BOX", idtmed[698], dbox1, 3); | |
c4561145 | 194 | |
b1952773 | 195 | // volume for second strip EST2 |
c4561145 | 196 | |
f117e3aa | 197 | |
b1952773 | 198 | Float_t dbox2[3]; |
f117e3aa | 199 | dbox2[1] = fgkNrowUM2*fgkCellRadius; |
200 | dbox2[0] = dbox1[0]; | |
b1952773 | 201 | dbox2[2] = dbox1[2]; |
c4561145 | 202 | |
b1952773 | 203 | gMC->Gsvolu("EST2","BOX", idtmed[698], dbox2, 3); |
c4561145 | 204 | |
b1952773 | 205 | // Place hexagonal cells ECCU placed inside EST1 |
f117e3aa | 206 | xb = 0.; |
b1952773 | 207 | zb = 0.; |
f117e3aa | 208 | yb = (dbox1[1]) - fgkCellRadius; |
209 | for (i = 1; i <= fgkNrowUM1; ++i) | |
a978c9e3 | 210 | { |
211 | number = i; | |
f117e3aa | 212 | gMC->Gspos("ECCU", number, "EST1", xb,yb,zb, 0, "ONLY"); |
213 | yb -= (fgkCellRadius*2.); | |
a978c9e3 | 214 | } |
f117e3aa | 215 | |
b1952773 | 216 | // Place hexagonal cells ECCU placed inside EST2 |
f117e3aa | 217 | xb = 0.; |
a978c9e3 | 218 | zb = 0.; |
f117e3aa | 219 | yb = (dbox2[1]) - fgkCellRadius; |
220 | for (i = 1; i <= fgkNrowUM2; ++i) | |
a978c9e3 | 221 | { |
222 | number = i; | |
f117e3aa | 223 | gMC->Gspos("ECCU", number, "EST2", xb,yb,zb, 0, "ONLY"); |
224 | //PH cout << "ECCU in EST2 ==> " << number << "\t"<<xb << "\t"<<yb <<endl; | |
225 | yb -= (fgkCellRadius*2.); | |
a978c9e3 | 226 | } |
c4561145 | 227 | |
f117e3aa | 228 | |
229 | //******************************************************// | |
230 | ||
231 | ||
232 | // STEP - IV | |
233 | //******************************************************// | |
234 | // 2 types of rectangular shaped unit modules EUM1 and EUM2 (defined by BOX) | |
235 | //---------------------------------EHC1 Start----------------------// | |
236 | // Create EHC1 : The honey combs for a unit module type 1 | |
237 | // First step is to create a honey comb unit module. | |
238 | // This is named as EHC1, we will lay the EST1 strips of | |
239 | // honey comb cells inside it. | |
a978c9e3 | 240 | |
f117e3aa | 241 | //Dimensions of EHC1 |
242 | //X-dimension = Number of columns + cell radius | |
243 | //Y-dimension = Number of rows * cell radius/sqrt3by2 - (some factor) | |
244 | //Z-dimension = cell depth/2 | |
245 | ||
b1952773 | 246 | Float_t dbox3[3]; |
f117e3aa | 247 | dbox3[0] = (dbox1[0]*fgkNcolUM1)-(fgkCellRadius*fgkSqroot3*(fgkNcolUM1-1)/6.); |
248 | dbox3[1] = dbox1[1]+fgkCellRadius/2.; | |
3cdb4e97 | 249 | dbox3[2] = fgkCellDepth/2.; |
f117e3aa | 250 | |
251 | //Create a BOX, Material AIR | |
252 | gMC->Gsvolu("EHC1","BOX", idtmed[698], dbox3, 3); | |
f117e3aa | 253 | // Place rectangular strips EST1 inside EHC1 unit module |
254 | xb = dbox3[0]-dbox1[0]; | |
b1952773 | 255 | |
f117e3aa | 256 | for (j = 1; j <= fgkNcolUM1; ++j) |
b1952773 | 257 | { |
258 | if(j%2 == 0) | |
259 | { | |
f117e3aa | 260 | yb = -fgkCellRadius/2.0; |
b1952773 | 261 | } |
262 | else | |
263 | { | |
f117e3aa | 264 | yb = fgkCellRadius/2.0; |
b1952773 | 265 | } |
266 | number = j; | |
f117e3aa | 267 | gMC->Gspos("EST1",number, "EHC1", xb, yb , 0. , 0, "MANY"); |
268 | //The strips are being placed from top towards bottom of the module | |
269 | //This is because the first cell in a module in hardware is the top | |
270 | //left corner cell | |
271 | xb = (dbox3[0]-dbox1[0])-j*fgkCellRadius*fgkSqroot3; | |
272 | ||
c4561145 | 273 | } |
f117e3aa | 274 | //--------------------EHC1 done----------------------------------// |
275 | ||
c4561145 | 276 | |
f117e3aa | 277 | //---------------------------------EHC2 Start----------------------// |
278 | // Create EHC2 : The honey combs for a unit module type 2 | |
279 | // First step is to create a honey comb unit module. | |
280 | // This is named as EHC2, we will lay the EST2 strips of | |
281 | // honey comb cells inside it. | |
282 | ||
283 | //Dimensions of EHC2 | |
284 | //X-dimension = Number of columns + cell radius | |
285 | //Y-dimension = Number of rows * cell radius/sqrt3by2 - (some factor) | |
286 | //Z-dimension = cell depth/2 | |
287 | ||
288 | dbox3[0] = (dbox1[0]*fgkNcolUM1)-(fgkCellRadius*fgkSqroot3*(fgkNcolUM1-1)/6.); | |
289 | dbox3[1] = dbox1[1]+fgkCellRadius/2.; | |
290 | dbox3[2] = fgkCellDepth/2.; | |
c4561145 | 291 | |
b1952773 | 292 | Float_t dbox4[3]; |
f117e3aa | 293 | |
294 | dbox4[0] =(dbox2[0]*fgkNcolUM2)-(fgkCellRadius*fgkSqroot3*(fgkNcolUM2-1)/6.); | |
295 | dbox4[1] = dbox2[1] + fgkCellRadius/2.; | |
b1952773 | 296 | dbox4[2] = dbox3[2]; |
a978c9e3 | 297 | |
f117e3aa | 298 | //Create a BOX of AIR |
299 | gMC->Gsvolu("EHC2","BOX", idtmed[698], dbox4, 3); | |
f117e3aa | 300 | |
301 | // Place rectangular strips EST2 inside EHC2 unit module | |
302 | xb = dbox4[0]-dbox2[0]; | |
303 | for (j = 1; j <= fgkNcolUM2; ++j) | |
304 | { | |
305 | if(j%2 == 0) | |
306 | { | |
307 | yb = -fgkCellRadius/2.0; | |
308 | } | |
309 | else | |
310 | { | |
311 | yb = +fgkCellRadius/2.0; | |
312 | } | |
313 | number = j; | |
314 | gMC->Gspos("EST2",number, "EHC2", xb, yb , 0. ,0, "MANY"); | |
315 | xb = (dbox4[0]-dbox2[0])-j*fgkCellRadius*fgkSqroot3; | |
316 | } | |
a978c9e3 | 317 | |
f117e3aa | 318 | |
319 | //--------------------EHC2 done----------------------------------// | |
320 | ||
321 | ||
322 | // Now the job is to assmeble an Unit module | |
323 | // It will have the following components | |
324 | // (a) Base plate of G10 of 0.2 cm | |
325 | // (b) Air gap of 0.05 cm | |
326 | // (c) Bottom PCB of 0.16 cm G10 | |
327 | // (d) Honey comb 0f 0.5 cm | |
328 | // (e) Top PCB of 0.16 cm G10 | |
329 | // (f) Air gap of 0.16 cm | |
330 | // (g) Back Plane of 0.1 cm G10 | |
331 | // (h) Then all around then we have an air gap of 0.5mm | |
332 | // (i) Then all around 0.5mm thick G10 insulation | |
333 | // (h) Then all around Stainless Steel boundary channel 0.3 cm thick | |
334 | //Let us first create them one by one | |
335 | //---------------------------------------------------// | |
336 | ||
337 | // ---------------- Lets do it first for UM Type A -----// | |
338 | ||
339 | //--------------------------------------------------// | |
340 | //Bottom and Top PCB : EPCA | |
341 | //=========================== | |
342 | // Make a 1.6mm thick G10 Bottom and Top PCB for Unit module A | |
343 | // X-dimension same as EHC1 - dbox3[0] | |
344 | // Y-dimension same as EHC1 - dbox3[1] | |
345 | // Z-dimension 0.16/2 = 0.08 cm | |
346 | //-------------------------------------------------// | |
347 | Float_t dboxPcbA[3]; | |
348 | dboxPcbA[0] = dbox3[0]; | |
349 | dboxPcbA[1] = dbox3[1]; | |
350 | dboxPcbA[2] = fgkThPCB/2.; | |
a978c9e3 | 351 | |
f117e3aa | 352 | //Top and Bottom PCB is a BOX of Material G10 |
353 | gMC->Gsvolu("EPCA","BOX", idtmed[607], dboxPcbA, 3); | |
f117e3aa | 354 | //--------------------------------------------------------// |
355 | //Back Plane : EBKA | |
356 | //================== | |
357 | // Make a 1.0mm thick Back Plane PCB for Unit module A | |
358 | // X-dimension same as EHC1 - dbox3[0] | |
359 | // Y-dimension same as EHC1 - dbox3[1] | |
360 | // Z-dimension 0.1/2 = 0.05 cm | |
361 | //------------------------------------------------------// | |
362 | Float_t dboxBPlaneA[3]; | |
363 | dboxBPlaneA[0] = dbox3[0]; | |
364 | dboxBPlaneA[1] = dbox3[1]; | |
365 | dboxBPlaneA[2] = fgkThBKP/2.; | |
366 | ||
367 | //Back PLane PCB of MAterial G10 | |
368 | gMC->Gsvolu("EBKA","BOX", idtmed[607], dboxBPlaneA, 3); | |
f117e3aa | 369 | //-------------------------------------------------------------// |
370 | ||
371 | //---------- That was all in the Z -direction of Unit Module A----// | |
372 | ||
373 | // Now lets us construct the boundary arround the Unit Module --// | |
374 | // This boundary has | |
375 | // (a) 0.5 mm X and Y and 10.3 mm Z dimension AIR gap | |
376 | // (b) 0.5 mm X and Y and 10.3 mm Z dimension G10 | |
377 | // (c) 3.0 mm X and Y and 12.3 mm Z dimension Stainless Steel | |
378 | ||
379 | ||
380 | ||
381 | //-------------------------------------------------// | |
382 | //AIR GAP between UM and Boundary : ECGA FOR PRESHOWER PLANE | |
383 | //========================================================== | |
384 | // Make a 10.3mm thick Air gap for Unit module A | |
385 | // X-dimension same as EHC1+0.05 | |
386 | // Y-dimension same as EHC1+0.05 | |
387 | // Z-dimension 1.03/2 = 0.515 cm | |
388 | Float_t dboxAir3A[3]; | |
389 | dboxAir3A[0] = dbox3[0]+(2.0*fgkGap); | |
390 | dboxAir3A[1] = dbox3[1]+(2.0*fgkGap); | |
391 | dboxAir3A[2] = fgkThAir/2.; | |
392 | ||
393 | //FOR PRESHOWER | |
394 | //Air gap is a BOX of Material Air | |
395 | gMC->Gsvolu("ECGA","BOX", idtmed[698], dboxAir3A, 3); | |
f117e3aa | 396 | |
397 | //FOR VETO | |
398 | //Air gap is a BOX of Material Air | |
399 | gMC->Gsvolu("ECVA","BOX", idtmed[698], dboxAir3A, 3); | |
f117e3aa | 400 | //-------------------------------------------------// |
401 | ||
402 | //-------------------------------------------------// | |
403 | //G10 boundary between honeycomb and SS : EDGA | |
404 | //================================================ | |
405 | // Make a 10.3mm thick G10 Boundary for Unit module A | |
406 | // X-dimension same as EHC1+Airgap+0.05 | |
407 | // Y-dimension same as EHC1+Airgap+0.05 | |
408 | // Z-dimension 1.03/2 = 0.515 cm | |
409 | Float_t dboxGGA[3]; | |
410 | dboxGGA[0] = dboxAir3A[0]+(2.0*fgkGap); | |
411 | dboxGGA[1] = dboxAir3A[1]+(2.0*fgkGap); | |
412 | dboxGGA[2] = fgkThG10/2.; | |
413 | ||
414 | //FOR PRESHOWER | |
415 | //G10 BOX | |
416 | gMC->Gsvolu("EDGA","BOX", idtmed[607], dboxGGA, 3); | |
f117e3aa | 417 | |
418 | //FOR VETO | |
419 | //G10 BOX | |
420 | gMC->Gsvolu("EDVA","BOX", idtmed[607], dboxGGA, 3); | |
f117e3aa | 421 | |
422 | //-------------------------------------------------// | |
423 | //----------------------------------------------------------// | |
424 | //Stainless Steel Bounadry : ESSA | |
425 | //================================== | |
426 | // Make a 10.3mm thick Stainless Steel boundary for Unit module A | |
427 | // X-dimension same as EHC1 + Airgap + G10 + 0.3 | |
428 | // Y-dimension same as EHC1 + Airgap + G10 + 0.3 | |
429 | // Z-dimension 1.03/2 = 0.515 cm | |
430 | //------------------------------------------------------// | |
431 | // A Stainless Steel Boundary Channel to house the unit module | |
c2518432 | 432 | |
433 | Float_t dboxSS1[3]; | |
434 | dboxSS1[0] = dboxGGA[0]+fgkSSBoundary; | |
435 | dboxSS1[1] = dboxGGA[1]+fgkSSBoundary; | |
436 | dboxSS1[2] = fgkThSS/2.; | |
f117e3aa | 437 | |
438 | //FOR PRESHOWER | |
439 | ||
440 | //Stainless Steel boundary - Material Stainless Steel | |
c2518432 | 441 | gMC->Gsvolu("ESSA","BOX", idtmed[618], dboxSS1, 3); |
f117e3aa | 442 | |
443 | //FOR VETO | |
444 | //Stainless Steel boundary - Material Stainless Steel | |
c2518432 | 445 | gMC->Gsvolu("ESVA","BOX", idtmed[618], dboxSS1, 3); |
f117e3aa | 446 | |
447 | //----------------------------------------------------------------// | |
448 | ||
449 | //----------------------------------------------------------------// | |
450 | // Here we need to place the volume in order ESSA -> EDGA -> ECGA | |
451 | // this makes the SS boundary and the 0.5mm thick FR4 insulation in place, | |
452 | // and the air volume ECGA acts as mother for the rest of components. | |
453 | // The above placeemnt is done at (0.,0.,0.) relative coordiante | |
454 | // Now we place bottom PCB, honeycomb, top PCB in this volume. We donot place | |
455 | // unnecessary air volumes now. Just leave the gap as we are placing them | |
456 | // in air only. This also reduces the number of volumes for geant to track. | |
457 | ||
458 | // Tree structure for different volumes | |
459 | // | |
460 | // EUM1 | |
461 | // | | |
462 | // -------------------- | |
463 | // | | | | |
464 | // EBPA ESSA EBKA | |
465 | // | | |
466 | // EDGA | |
467 | // | | |
468 | // ECGA | |
469 | // | | |
470 | // -------------------- | |
471 | // | | | | |
472 | // EPCA(1) EHC1 EPCA(2) | |
473 | // (bottom) | (top PCB) | |
474 | // | | |
475 | // Sensitive volume | |
476 | // (gas) | |
477 | // | |
478 | ||
479 | ||
480 | //FOR VETO | |
481 | //Creating the side channels | |
482 | // SS boundary channel, followed by G10 and Air Gap | |
483 | gMC->Gspos("EDVA", 1, "ESVA", 0., 0., 0., 0, "ONLY"); | |
484 | gMC->Gspos("ECVA", 1, "EDVA", 0., 0., 0., 0, "ONLY"); | |
485 | ||
486 | //FOR PRESHOWER | |
487 | gMC->Gspos("EDGA", 1, "ESSA", 0., 0., 0., 0, "ONLY"); | |
488 | gMC->Gspos("ECGA", 1, "EDGA", 0., 0., 0., 0, "ONLY"); | |
489 | ||
490 | // now other components, using Bedanga's code, but changing the values. | |
491 | //Positioning Bottom PCB, Honey Comb abd Top PCB in AIR | |
492 | ||
493 | //For veto plane | |
494 | //Positioning the Bottom 0.16 cm PCB | |
495 | Float_t zbpcb = -dboxAir3A[2] + (2.0*fgkGap) + fgkThPCB/2.; | |
496 | gMC->Gspos("EPCA", 1, "ECVA", 0., 0., zbpcb, 0, "ONLY"); | |
497 | //Positioning the Honey Comb 0.5 cm | |
498 | Float_t zhc = zbpcb + fgkThPCB/2. + fgkCellDepth/2.; | |
499 | gMC->Gspos("EHC1", 1, "ECVA", 0., 0., zhc, 0, "ONLY"); | |
500 | //Positioning the Top PCB 0.16 cm | |
501 | Float_t ztpcb = zhc + fgkCellDepth/2 + fgkThPCB/2.; | |
502 | gMC->Gspos("EPCA", 2, "ECVA", 0., 0., ztpcb, 0, "ONLY"); | |
503 | ||
504 | ||
505 | //For Preshower plane the ordering is reversed | |
506 | //Positioning the Bottom 0.16 cm PCB | |
507 | zbpcb = -dboxAir3A[2] + fgkThPCB + fgkThPCB/2.; | |
508 | gMC->Gspos("EPCA", 1, "ECGA", 0., 0., zbpcb, 0, "ONLY"); | |
509 | //Positioning the Honey Comb 0.5 cm | |
510 | zhc = zbpcb + fgkThPCB/2. + fgkCellDepth/2.; | |
511 | gMC->Gspos("EHC1", 1, "ECGA", 0., 0., zhc, 0, "ONLY"); | |
512 | //Positioning the Top PCB 0.16 cm | |
513 | ztpcb = zhc + fgkCellDepth/2 + fgkThPCB/2.; | |
514 | gMC->Gspos("EPCA", 2, "ECGA", 0., 0., ztpcb, 0, "ONLY"); | |
515 | ||
516 | ||
517 | ||
518 | ||
519 | //--------------Now let us construct final UM ---------------// | |
520 | // We will do it as follows : | |
521 | // (i) First make a UM of air. which will have dimensions | |
522 | // of the SS boundary Channel (in x,y) and of height 13.3mm | |
523 | //(ii) Then we will place all the components | |
524 | ||
525 | //----------------------------------------------------------// | |
526 | // A unit module type A of Air | |
527 | // Dimensions of Unit Module same as SS boundary channel | |
c2518432 | 528 | Float_t dboxUM1[3]; |
529 | dboxUM1[0] = dboxSS1[0]; | |
530 | dboxUM1[1] = dboxSS1[1]; | |
531 | dboxUM1[2] = fgkThSS/2. +0.15; // 0.15 added to accomodate Base Plate at | |
f117e3aa | 532 | // the bottom and the backplane PCB at the top. |
533 | ||
534 | //FOR PRESHOWER | |
535 | //Create a Unit module of above dimensions Material : AIR | |
c2518432 | 536 | gMC->Gsvolu("EUM1","BOX", idtmed[698], dboxUM1, 3); |
f117e3aa | 537 | //FOR VETO |
c2518432 | 538 | gMC->Gsvolu("EUV1","BOX", idtmed[698], dboxUM1, 3); |
f117e3aa | 539 | |
540 | //----------------------------------------------------------------// | |
541 | ||
542 | //BASE PLATE : EBPA | |
543 | //================== | |
544 | // Make a 2mm thick G10 Base plate for Unit module A | |
545 | // Base plate is as big as the final UM dimensions that is as | |
546 | // SS boundary channel | |
547 | Float_t dboxBaseA[3]; | |
c2518432 | 548 | dboxBaseA[0] = dboxSS1[0]; |
549 | dboxBaseA[1] = dboxSS1[1]; | |
f117e3aa | 550 | dboxBaseA[2] = fgkThBase/2.; |
551 | ||
552 | //Base Blate is a G10 BOX | |
553 | gMC->Gsvolu("EBPA","BOX", idtmed[607], dboxBaseA, 3); | |
f117e3aa | 554 | //----------------------------------------------------// |
555 | ||
556 | //FOR VETO | |
557 | //- Placing of all components of UM in AIR BOX EUM1--// | |
558 | //(1) FIRST PUT THE BASE PLATE | |
c2518432 | 559 | Float_t zbaseplate = -dboxUM1[2] + fgkThBase/2.; |
f117e3aa | 560 | gMC->Gspos("EBPA", 1, "EUV1", 0., 0., zbaseplate, 0, "ONLY"); |
561 | ||
562 | //(2) NEXT PLACING the SS BOX | |
563 | Float_t zss = zbaseplate + fgkThBase/2. + fgkThSS/2.; | |
564 | gMC->Gspos("ESVA", 1, "EUV1", 0., 0., zss, 0, "ONLY"); | |
565 | ||
566 | // (3) Positioning the Backplane PCB 0.1 cm | |
567 | Float_t zbkp = zss + fgkThSS/2. + fgkThBKP/2.; | |
568 | gMC->Gspos("EBKA", 1, "EUV1", 0., 0., zbkp, 0, "ONLY"); | |
569 | ||
570 | //FOR PRESHOWER | |
571 | // (3) Positioning the Backplane PCB 0.1 cm | |
c2518432 | 572 | zbkp = -dboxUM1[2] + fgkThBKP/2.; |
f117e3aa | 573 | gMC->Gspos("EBKA", 1, "EUM1", 0., 0., zbkp, 0, "ONLY"); |
574 | ||
575 | //(2) NEXT PLACING the SS BOX | |
576 | zss = zbkp + fgkThBKP/2. + fgkThSS/2.; | |
577 | gMC->Gspos("ESSA", 1, "EUM1", 0., 0., zss, 0, "ONLY"); | |
578 | ||
579 | //(1) FIRST PUT THE BASE PLATE | |
580 | zbaseplate = zss + fgkThSS/2 + fgkThBase/2.; | |
581 | gMC->Gspos("EBPA", 1, "EUM1", 0., 0., zbaseplate, 0, "ONLY"); | |
582 | //-------------------- UM Type A completed ------------------------// | |
583 | ||
584 | ||
585 | ||
586 | //-------------------- Lets do the same thing for UM type B -------// | |
587 | //--------------------------------------------------// | |
588 | //Bottom and Top PCB : EPCB | |
589 | //=========================== | |
590 | // Make a 1.6mm thick G10 Bottom and Top PCB for Unit module B | |
591 | // X-dimension same as EHC2 - dbox4[0] | |
592 | // Y-dimension same as EHC2 - dbox4[1] | |
593 | // Z-dimension 0.16/2 = 0.08 cm | |
594 | //-------------------------------------------------// | |
595 | Float_t dboxPcbB[3]; | |
596 | dboxPcbB[0] = dbox4[0]; | |
597 | dboxPcbB[1] = dbox4[1]; | |
598 | dboxPcbB[2] = fgkThPCB/2.; | |
599 | ||
600 | //Top and Bottom PCB is a BOX of Material G10 | |
601 | gMC->Gsvolu("EPCB","BOX", idtmed[607], dboxPcbB, 3); | |
f117e3aa | 602 | //--------------------------------------------------------// |
603 | //Back Plane : EBKB | |
604 | //================== | |
605 | // Make a 1.0mm thick Back Plane PCB for Unit module B | |
606 | // X-dimension same as EHC2 - dbox4[0] | |
607 | // Y-dimension same as EHC2 - dbox4[1] | |
608 | // Z-dimension 0.1/2 = 0.05 cm | |
609 | //------------------------------------------------------// | |
610 | Float_t dboxBPlaneB[3]; | |
611 | dboxBPlaneB[0] = dbox4[0]; | |
612 | dboxBPlaneB[1] = dbox4[1]; | |
613 | dboxBPlaneB[2] = fgkThBKP/2.; | |
614 | ||
615 | //Back PLane PCB of MAterial G10 | |
616 | gMC->Gsvolu("EBKB","BOX", idtmed[607], dboxBPlaneB, 3); | |
f117e3aa | 617 | //-------------------------------------------------------------// |
618 | ||
619 | //---------- That was all in the Z -direction of Unit Module B----// | |
620 | ||
621 | // Now lets us construct the boundary arround the Unit Module --// | |
622 | // This boundary has | |
623 | // (a) 0.5 mm X and Y and 10.3 mm Z dimension AIR gap | |
624 | // (b) 0.5 mm X and Y and 10.3 mm Z dimension G10 | |
625 | // (c) 3.0 mm X and Y and 12.3 mm Z dimension Stainless Steel | |
626 | ||
627 | //-------------------------------------------------// | |
628 | //AIR GAP between UM and Boundary : ECGB | |
629 | //================================================ | |
630 | // Make a 10.3mm thick Air gap for Unit module B | |
631 | // X-dimension same as EHC2+0.05 | |
632 | // Y-dimension same as EHC2+0.05 | |
633 | // Z-dimension 1.03/2 = 0.515 cm | |
634 | Float_t dboxAir3B[3]; | |
635 | dboxAir3B[0] = dbox4[0]+(2.0*fgkGap); | |
636 | dboxAir3B[1] = dbox4[1]+(2.0*fgkGap); | |
637 | dboxAir3B[2] = fgkThAir/2.; | |
638 | ||
639 | //PRESHOWER | |
640 | //Air gap is a BOX of Material Air | |
641 | gMC->Gsvolu("ECGB","BOX", idtmed[698], dboxAir3B, 3); | |
f117e3aa | 642 | //VETO |
643 | gMC->Gsvolu("ECVB","BOX", idtmed[698], dboxAir3B, 3); | |
f117e3aa | 644 | |
645 | //-------------------------------------------------// | |
646 | ||
647 | //-------------------------------------------------// | |
648 | //G10 boundary between honeycomb and SS : EDGB | |
649 | //================================================ | |
650 | // Make a 10.3mm thick G10 Boundary for Unit module B | |
651 | // X-dimension same as EHC2+Airgap+0.05 | |
652 | // Y-dimension same as EHC2+Airgap+0.05 | |
653 | // Z-dimension 1.03/2 = 0.515 cm | |
654 | Float_t dboxGGB[3]; | |
655 | dboxGGB[0] = dboxAir3B[0]+(2.0*fgkGap); | |
656 | dboxGGB[1] = dboxAir3B[1]+(2.0*fgkGap); | |
657 | dboxGGB[2] = fgkThG10/2.; | |
658 | ||
659 | //PRESHOWER | |
660 | //G10 BOX | |
661 | gMC->Gsvolu("EDGB","BOX", idtmed[607], dboxGGB, 3); | |
f117e3aa | 662 | //VETO |
663 | gMC->Gsvolu("EDVB","BOX", idtmed[607], dboxGGB, 3); | |
f117e3aa | 664 | //-------------------------------------------------// |
665 | //----------------------------------------------------------// | |
666 | //Stainless Steel Bounadry : ESSB | |
667 | //================================== | |
668 | // Make a 10.3mm thick Stainless Steel boundary for Unit module B | |
669 | // X-dimension same as EHC2 + Airgap + G10 + 0.3 | |
670 | // Y-dimension same as EHC2 + Airgap + G10 + 0.3 | |
671 | // Z-dimension 1.03/2 = 0.515 cm | |
672 | //------------------------------------------------------// | |
673 | // A Stainless Steel Boundary Channel to house the unit module | |
c2518432 | 674 | |
675 | Float_t dboxSS2[3]; | |
676 | dboxSS2[0] = dboxGGB[0] + fgkSSBoundary; | |
677 | dboxSS2[1] = dboxGGB[1] + fgkSSBoundary; | |
678 | dboxSS2[2] = fgkThSS/2.; | |
f117e3aa | 679 | |
680 | //PRESHOWER | |
681 | //Stainless Steel boundary - Material Stainless Steel | |
c2518432 | 682 | gMC->Gsvolu("ESSB","BOX", idtmed[618], dboxSS2, 3); |
f117e3aa | 683 | //VETO |
c2518432 | 684 | gMC->Gsvolu("ESVB","BOX", idtmed[618], dboxSS2, 3); |
f117e3aa | 685 | //----------------------------------------------------------------// |
686 | ||
687 | //----------------------------------------------------------------// | |
688 | // Here we need to place the volume in order ESSB -> EDGB -> ECGB | |
689 | // this makes the SS boiundary and the 0.5mm thick FR4 insulation in place, | |
690 | // and the air volume ECGB acts as mother for the rest of components. | |
691 | // The above placeemnt is done at (0.,0.,0.) relative coordiante | |
692 | // Now we place bottom PCB, honeycomb, top PCB in this volume. We donot place | |
693 | // unnecessary air volumes now. Just leave the gap as we are placing them | |
694 | // in air only. This also reduces the number of volumes for geant to track. | |
695 | ||
696 | // Tree structure for different volumes | |
697 | // | |
698 | // EUM2 | |
699 | // | | |
700 | // -------------------- | |
701 | // | | | | |
702 | // EBPB ESSB EBKB | |
703 | // | | |
704 | // EDGB | |
705 | // | | |
706 | // ECGB | |
707 | // | | |
708 | // -------------------- | |
709 | // | | | | |
710 | // EPCB(1) EHC2 EPCB(2) | |
711 | // (bottom) | (top PCB) | |
712 | // | | |
713 | // Sensitive volume | |
714 | // (gas) | |
715 | // | |
716 | ||
717 | //PRESHOWER | |
718 | //Creating the side channels | |
719 | // SS boundary channel, followed by G10 and Air Gap | |
720 | gMC->Gspos("EDGB", 1, "ESSB", 0., 0., 0., 0, "ONLY"); | |
721 | gMC->Gspos("ECGB", 1, "EDGB", 0., 0., 0., 0, "ONLY"); | |
722 | //VETO | |
723 | gMC->Gspos("EDVB", 1, "ESVB", 0., 0., 0., 0, "ONLY"); | |
724 | gMC->Gspos("ECVB", 1, "EDVB", 0., 0., 0., 0, "ONLY"); | |
725 | ||
726 | // now other components, using Bedang's code, but changing the values. | |
727 | //Positioning Bottom PCB, Honey Comb abd Top PCB in AIR | |
728 | ||
729 | //VETO | |
730 | //Positioning the Bottom 0.16 cm PCB | |
731 | Float_t zbpcb2 = -dboxAir3B[2] + (2.0*fgkGap) + fgkThPCB/2.; | |
732 | gMC->Gspos("EPCB", 1, "ECVB", 0., 0., zbpcb2, 0, "ONLY"); | |
733 | //Positioning the Honey Comb 0.5 cm | |
734 | Float_t zhc2 = zbpcb2 + fgkThPCB/2. + fgkCellDepth/2.; | |
735 | gMC->Gspos("EHC2", 1, "ECVB", 0., 0., zhc2, 0, "ONLY"); | |
736 | //Positioning the Top PCB 0.16 cm | |
737 | Float_t ztpcb2 = zhc2 + fgkCellDepth/2 + fgkThPCB/2.; | |
738 | gMC->Gspos("EPCB", 2, "ECVB", 0., 0., ztpcb2, 0, "ONLY"); | |
739 | ||
740 | //PRESHOWER | |
741 | //For preshower plane the ordering is reversed | |
742 | //Positioning the Bottom 0.16 cm PCB | |
743 | zbpcb2 = -dboxAir3B[2] + fgkThPCB + fgkThPCB/2.; | |
744 | gMC->Gspos("EPCB", 1, "ECGB", 0., 0., zbpcb2, 0, "ONLY"); | |
745 | //Positioning the Honey Comb 0.5 cm | |
746 | zhc2 = zbpcb2 + fgkThPCB/2. + fgkCellDepth/2.; | |
747 | gMC->Gspos("EHC2", 1, "ECGB", 0., 0., zhc2, 0, "ONLY"); | |
748 | //Positioning the Top PCB 0.16 cm | |
749 | ztpcb2 = zhc2 + fgkCellDepth/2 + fgkThPCB/2.; | |
750 | gMC->Gspos("EPCB", 2, "ECGB", 0., 0., ztpcb2, 0, "ONLY"); | |
751 | ||
752 | ||
753 | ||
754 | //--------------Now let us construct final UM ---------------// | |
755 | // We will do it as follows : | |
756 | // (i) First make a UM of air. which will have dimensions | |
757 | // of the SS boundary Channel (in x,y) and of height 13.3mm | |
758 | //(ii) Then we will place all the components | |
759 | ||
760 | //----------------------------------------------------------// | |
761 | // A unit module type B of Air | |
762 | // Dimensions of Unit Module same as SS boundary channel | |
c2518432 | 763 | |
764 | Float_t dboxUM2[3]; | |
765 | dboxUM2[0] = dboxSS2[0]; | |
766 | dboxUM2[1] = dboxSS2[1]; | |
767 | dboxUM2[2] = fgkThSS/2. +0.15; // 0.15 added to accomodate Base Plate at | |
f117e3aa | 768 | // the bottom and the backplane PCB at the top. |
769 | ||
770 | //PRESHOWER | |
771 | //Create a Unit module of above dimensions Material : AIR | |
c2518432 | 772 | gMC->Gsvolu("EUM2","BOX", idtmed[698], dboxUM2, 3); |
f117e3aa | 773 | |
774 | //VETO | |
c2518432 | 775 | gMC->Gsvolu("EUV2","BOX", idtmed[698], dboxUM2, 3); |
f117e3aa | 776 | //----------------------------------------------------------------// |
777 | ||
778 | //BASE PLATE : EBPB | |
779 | //================== | |
780 | // Make a 2mm thick G10 Base plate for Unit module B | |
781 | // Base plate is as big as the final UM dimensions that is as | |
782 | // SS boundary channel | |
783 | Float_t dboxBaseB[3]; | |
c2518432 | 784 | dboxBaseB[0] = dboxSS2[0]; |
785 | dboxBaseB[1] = dboxSS2[1]; | |
f117e3aa | 786 | dboxBaseB[2] = fgkThBase/2.; |
787 | ||
788 | //Base Blate is a G10 BOX | |
789 | gMC->Gsvolu("EBPB","BOX", idtmed[607], dboxBaseB, 3); | |
f117e3aa | 790 | //----------------------------------------------------// |
791 | ||
792 | //VETO | |
793 | //- Placing of all components of UM in AIR BOX EUM2--// | |
794 | //(1) FIRST PUT THE BASE PLATE | |
c2518432 | 795 | Float_t zbaseplate2 = -dboxUM2[2] + fgkThBase/2.; |
f117e3aa | 796 | gMC->Gspos("EBPB", 1, "EUV2", 0., 0., zbaseplate2, 0, "ONLY"); |
797 | ||
798 | //(2) NEXT PLACING the SS BOX | |
799 | Float_t zss2 = zbaseplate2 + fgkThBase/2. + fgkThSS/2.; | |
800 | gMC->Gspos("ESVB", 1, "EUV2", 0., 0., zss2, 0, "ONLY"); | |
801 | ||
802 | // (3) Positioning the Backplane PCB 0.1 cm | |
803 | Float_t zbkp2 = zss2 + fgkThSS/2. + fgkThBKP/2.; | |
804 | gMC->Gspos("EBKB", 1, "EUV2", 0., 0., zbkp2, 0, "ONLY"); | |
805 | ||
806 | ||
807 | ||
808 | //FOR PRESHOWER | |
809 | // (3) Positioning the Backplane PCB 0.1 cm | |
c2518432 | 810 | zbkp2 = -dboxUM2[2] + fgkThBKP/2.; |
f117e3aa | 811 | gMC->Gspos("EBKB", 1, "EUM2", 0., 0., zbkp2, 0, "ONLY"); |
812 | ||
813 | //(2) NEXT PLACING the SS BOX | |
814 | zss2 = zbkp2 + fgkThBKP/2. + fgkThSS/2.; | |
815 | gMC->Gspos("ESSB", 1, "EUM2", 0., 0., zss2, 0, "ONLY"); | |
816 | ||
817 | //(1) FIRST PUT THE BASE PLATE | |
818 | zbaseplate2 = zss2 + fgkThSS/2 + fgkThBase/2.; | |
819 | gMC->Gspos("EBPB", 1, "EUM2", 0., 0., zbaseplate2, 0, "ONLY"); | |
820 | //-------------------- UM Type B completed ------------------------// | |
821 | ||
822 | ||
823 | //--- Now we need to make Lead plates of UM dimension -----// | |
824 | ||
825 | /**************************/ | |
826 | //----------------------------------------------------------// | |
827 | // The lead convertor is of unit module size | |
828 | // Dimensions of Unit Module same as SS boundary channel | |
829 | ||
830 | Float_t dboxPba[3]; | |
c2518432 | 831 | dboxPba[0] = dboxUM1[0]; |
832 | dboxPba[1] = dboxUM1[1]; | |
f117e3aa | 833 | dboxPba[2] = fgkThLead/2.; |
834 | // Lead of UM dimension | |
835 | gMC->Gsvolu("EPB1","BOX", idtmed[600], dboxPba, 3); | |
f117e3aa | 836 | |
837 | Float_t dboxPbb[3]; | |
c2518432 | 838 | dboxPbb[0] = dboxUM2[0]; |
839 | dboxPbb[1] = dboxUM2[1]; | |
f117e3aa | 840 | dboxPbb[2] = fgkThLead/2.; |
841 | // Lead of UM dimension | |
842 | gMC->Gsvolu("EPB2","BOX", idtmed[600], dboxPbb, 3); | |
f117e3aa | 843 | |
844 | //----------------------------------------------------------------// | |
c4561145 | 845 | |
b1952773 | 846 | // 2 types of Rectangular shaped supermodules (BOX) |
847 | //each with 6 unit modules | |
848 | ||
849 | // volume for SUPERMODULE ESMA | |
850 | //Space added to provide a gapping for HV between UM's | |
f117e3aa | 851 | //There is a gap of 0.15 cm between two Modules (UMs) |
852 | // in x-direction and 0.1cm along y-direction | |
b1952773 | 853 | |
36031625 | 854 | Float_t dboxSM1[3]; |
c2518432 | 855 | dboxSM1[0] = 3.0*dboxUM1[0] + (2.0*0.075); |
856 | dboxSM1[1] = 2.0*dboxUM1[1] + 0.05; | |
857 | dboxSM1[2] = dboxUM1[2]; | |
f117e3aa | 858 | |
859 | //FOR PRESHOWER | |
36031625 | 860 | gMC->Gsvolu("ESMA","BOX", idtmed[698], dboxSM1, 3); |
a978c9e3 | 861 | |
f117e3aa | 862 | //FOR VETO |
863 | gMC->Gsvolu("EMVA","BOX", idtmed[698], dboxSM1, 3); | |
f117e3aa | 864 | |
b1952773 | 865 | //Position the 6 unit modules in EMSA |
36031625 | 866 | Float_t xa1,xa2,xa3,ya1,ya2; |
c2518432 | 867 | xa1 = dboxSM1[0] - dboxUM1[0]; |
868 | xa2 = xa1 - dboxUM1[0] - 0.15 - dboxUM1[0]; | |
869 | xa3 = xa2 - dboxUM1[0] - 0.15 - dboxUM1[0]; | |
870 | ya1 = dboxSM1[1] - dboxUM1[1]; | |
871 | ya2 = ya1 - dboxUM1[1] - 0.1 - dboxUM1[1]; | |
f117e3aa | 872 | |
873 | //PRESHOWER | |
a978c9e3 | 874 | gMC->Gspos("EUM1", 1, "ESMA", xa1, ya1, 0., 0, "ONLY"); |
875 | gMC->Gspos("EUM1", 2, "ESMA", xa2, ya1, 0., 0, "ONLY"); | |
876 | gMC->Gspos("EUM1", 3, "ESMA", xa3, ya1, 0., 0, "ONLY"); | |
877 | gMC->Gspos("EUM1", 4, "ESMA", xa1, ya2, 0., 0, "ONLY"); | |
878 | gMC->Gspos("EUM1", 5, "ESMA", xa2, ya2, 0., 0, "ONLY"); | |
879 | gMC->Gspos("EUM1", 6, "ESMA", xa3, ya2, 0., 0, "ONLY"); | |
b1952773 | 880 | |
f117e3aa | 881 | //VETO |
882 | gMC->Gspos("EUV1", 1, "EMVA", xa1, ya1, 0., 0, "ONLY"); | |
883 | gMC->Gspos("EUV1", 2, "EMVA", xa2, ya1, 0., 0, "ONLY"); | |
884 | gMC->Gspos("EUV1", 3, "EMVA", xa3, ya1, 0., 0, "ONLY"); | |
885 | gMC->Gspos("EUV1", 4, "EMVA", xa1, ya2, 0., 0, "ONLY"); | |
886 | gMC->Gspos("EUV1", 5, "EMVA", xa2, ya2, 0., 0, "ONLY"); | |
887 | gMC->Gspos("EUV1", 6, "EMVA", xa3, ya2, 0., 0, "ONLY"); | |
888 | ||
b1952773 | 889 | |
890 | // volume for SUPERMODULE ESMB | |
891 | //Space is added to provide a gapping for HV between UM's | |
36031625 | 892 | Float_t dboxSM2[3]; |
c2518432 | 893 | dboxSM2[0] = 2.0*dboxUM2[0] + 0.075; |
894 | dboxSM2[1] = 3.0*dboxUM2[1] + (2.0*0.05); | |
895 | dboxSM2[2] = dboxUM2[2]; | |
b1952773 | 896 | |
f117e3aa | 897 | //PRESHOWER |
36031625 | 898 | gMC->Gsvolu("ESMB","BOX", idtmed[698], dboxSM2, 3); |
f117e3aa | 899 | //VETO |
900 | gMC->Gsvolu("EMVB","BOX", idtmed[698], dboxSM2, 3); | |
f117e3aa | 901 | |
b1952773 | 902 | //Position the 6 unit modules in EMSB |
36031625 | 903 | Float_t xb1,xb2,yb1,yb2,yb3; |
c2518432 | 904 | xb1 = dboxSM2[0] - dboxUM2[0]; |
905 | xb2 = xb1 - dboxUM2[0] - 0.15 - dboxUM2[0]; | |
906 | yb1 = dboxSM2[1] - dboxUM2[1]; | |
907 | yb2 = yb1 - dboxUM2[1] - 0.1 - dboxUM2[1]; | |
908 | yb3 = yb2 - dboxUM2[1] - 0.1 - dboxUM2[1]; | |
f117e3aa | 909 | |
910 | ||
911 | //PRESHOWER | |
a978c9e3 | 912 | gMC->Gspos("EUM2", 1, "ESMB", xb1, yb1, 0., 0, "ONLY"); |
913 | gMC->Gspos("EUM2", 2, "ESMB", xb2, yb1, 0., 0, "ONLY"); | |
914 | gMC->Gspos("EUM2", 3, "ESMB", xb1, yb2, 0., 0, "ONLY"); | |
915 | gMC->Gspos("EUM2", 4, "ESMB", xb2, yb2, 0., 0, "ONLY"); | |
916 | gMC->Gspos("EUM2", 5, "ESMB", xb1, yb3, 0., 0, "ONLY"); | |
917 | gMC->Gspos("EUM2", 6, "ESMB", xb2, yb3, 0., 0, "ONLY"); | |
918 | ||
f117e3aa | 919 | //VETO |
920 | gMC->Gspos("EUV2", 1, "EMVB", xb1, yb1, 0., 0, "ONLY"); | |
921 | gMC->Gspos("EUV2", 2, "EMVB", xb2, yb1, 0., 0, "ONLY"); | |
922 | gMC->Gspos("EUV2", 3, "EMVB", xb1, yb2, 0., 0, "ONLY"); | |
923 | gMC->Gspos("EUV2", 4, "EMVB", xb2, yb2, 0., 0, "ONLY"); | |
924 | gMC->Gspos("EUV2", 5, "EMVB", xb1, yb3, 0., 0, "ONLY"); | |
925 | gMC->Gspos("EUV2", 6, "EMVB", xb2, yb3, 0., 0, "ONLY"); | |
b1952773 | 926 | |
f117e3aa | 927 | // Make smiliar stucture for lead as for PMD plane |
928 | //================================================ | |
b1952773 | 929 | |
f117e3aa | 930 | // 2 types of Rectangular shaped supermodules (BOX) |
931 | //each with 6 unit modules | |
932 | ||
933 | // volume for SUPERMODULE ESMPbA | |
934 | //Space added to provide a gapping for HV between UM's | |
b1952773 | 935 | |
f117e3aa | 936 | Float_t dboxSMPb1[3]; |
c2518432 | 937 | dboxSMPb1[0] = 3.0*dboxUM1[0] + (2.0*0.075); |
938 | dboxSMPb1[1] = 2.0*dboxUM1[1] + 0.05; | |
f117e3aa | 939 | dboxSMPb1[2] = fgkThLead/2.; |
940 | ||
941 | gMC->Gsvolu("ESPA","BOX", idtmed[698], dboxSMPb1, 3); | |
f117e3aa | 942 | |
b1952773 | 943 | |
f117e3aa | 944 | //Position the 6 unit modules in ESMPbA |
945 | Float_t xpa1,xpa2,xpa3,ypa1,ypa2; | |
c2518432 | 946 | xpa1 = -dboxSMPb1[0] + dboxUM1[0]; |
947 | xpa2 = xpa1 + dboxUM1[0] + 0.15 + dboxUM1[0]; | |
948 | xpa3 = xpa2 + dboxUM1[0] + 0.15 + dboxUM1[0]; | |
949 | ypa1 = dboxSMPb1[1] - dboxUM1[1]; | |
950 | ypa2 = ypa1 - dboxUM1[1] - 0.1 - dboxUM1[1]; | |
b1952773 | 951 | |
c4561145 | 952 | |
f117e3aa | 953 | gMC->Gspos("EPB1", 1, "ESPA", xpa1, ypa1, 0., 0, "ONLY"); |
954 | gMC->Gspos("EPB1", 2, "ESPA", xpa2, ypa1, 0., 0, "ONLY"); | |
955 | gMC->Gspos("EPB1", 3, "ESPA", xpa3, ypa1, 0., 0, "ONLY"); | |
956 | gMC->Gspos("EPB1", 4, "ESPA", xpa1, ypa2, 0., 0, "ONLY"); | |
957 | gMC->Gspos("EPB1", 5, "ESPA", xpa2, ypa2, 0., 0, "ONLY"); | |
958 | gMC->Gspos("EPB1", 6, "ESPA", xpa3, ypa2, 0., 0, "ONLY"); | |
c4561145 | 959 | |
c4561145 | 960 | |
f117e3aa | 961 | // volume for SUPERMODULE ESMPbB |
962 | //Space is added to provide a gapping for HV between UM's | |
963 | Float_t dboxSMPb2[3]; | |
c2518432 | 964 | dboxSMPb2[0] = 2.0*dboxUM2[0] + 0.075; |
965 | dboxSMPb2[1] = 3.0*dboxUM2[1] + (2.0*0.05); | |
f117e3aa | 966 | dboxSMPb2[2] = fgkThLead/2.; |
b1952773 | 967 | |
f117e3aa | 968 | gMC->Gsvolu("ESPB","BOX", idtmed[698], dboxSMPb2, 3); |
f117e3aa | 969 | |
970 | //Position the 6 unit modules in ESMPbB | |
971 | Float_t xpb1,xpb2,ypb1,ypb2,ypb3; | |
c2518432 | 972 | xpb1 = -dboxSMPb2[0] + dboxUM2[0]; |
973 | xpb2 = xpb1 + dboxUM2[0] + 0.15 + dboxUM2[0]; | |
974 | ypb1 = dboxSMPb2[1] - dboxUM2[1]; | |
975 | ypb2 = ypb1 - dboxUM2[1] - 0.1 - dboxUM2[1]; | |
976 | ypb3 = ypb2 - dboxUM2[1] - 0.1 - dboxUM2[1]; | |
f117e3aa | 977 | |
978 | ||
979 | gMC->Gspos("EPB2", 1, "ESPB", xpb1, ypb1, 0., 0, "ONLY"); | |
980 | gMC->Gspos("EPB2", 2, "ESPB", xpb2, ypb1, 0., 0, "ONLY"); | |
981 | gMC->Gspos("EPB2", 3, "ESPB", xpb1, ypb2, 0., 0, "ONLY"); | |
982 | gMC->Gspos("EPB2", 4, "ESPB", xpb2, ypb2, 0., 0, "ONLY"); | |
983 | gMC->Gspos("EPB2", 5, "ESPB", xpb1, ypb3, 0., 0, "ONLY"); | |
984 | gMC->Gspos("EPB2", 6, "ESPB", xpb2, ypb3, 0., 0, "ONLY"); | |
985 | ||
986 | ||
987 | //--------------------------------------------------- | |
988 | /// ALICE PMD FEE BOARDS IMPLEMENTATION | |
989 | // Dt: 25th February 2006 | |
990 | // - M.M. Mondal, S.K. Prasad and P.K. Netrakanti | |
991 | //--------------------------------------------------- | |
992 | ||
993 | //FEE boards | |
994 | // It is FR4 board of length 7cm | |
995 | // breadth of 2.4 cm and thickness 0.1cm | |
996 | Float_t dboxFEE[3]; | |
997 | dboxFEE[0] = 0.05; | |
998 | dboxFEE[1] = 3.50; | |
999 | dboxFEE[2] = 1.20; | |
1000 | ||
1001 | gMC->Gsvolu("EFEE","BOX", idtmed[607], dboxFEE, 3); | |
f117e3aa | 1002 | |
1003 | //Mother volume to accomodate FEE boards | |
1004 | // It should have the dimension | |
1005 | // as the back plane or the | |
1006 | //corresponding UM | |
1007 | //TYPE A | |
1008 | //------------------------------------------------------// | |
1009 | ||
1010 | Float_t dboxFEEBPlaneA[3]; | |
1011 | dboxFEEBPlaneA[0] = dboxBPlaneA[0]; //dbox3[0]; | |
1012 | dboxFEEBPlaneA[1] = dboxBPlaneA[1];//dbox3[1]; | |
1013 | dboxFEEBPlaneA[2] = 1.2; | |
1014 | ||
1015 | //Volume of same dimension as Back PLane of Material AIR | |
1016 | gMC->Gsvolu("EFBA","BOX", idtmed[698], dboxFEEBPlaneA, 3); | |
f117e3aa | 1017 | |
1018 | //TYPE B | |
1019 | Float_t dboxFEEBPlaneB[3]; | |
1020 | dboxFEEBPlaneB[0] = dboxBPlaneB[0]; //dbox4[0]; | |
1021 | dboxFEEBPlaneB[1] = dboxBPlaneB[1];//dbox4[1]; | |
1022 | dboxFEEBPlaneB[2] = 1.2; | |
1023 | ||
1024 | //Back PLane PCB of MAterial G10 | |
1025 | gMC->Gsvolu("EFBB","BOX", idtmed[698], dboxFEEBPlaneB, 3); | |
b1952773 | 1026 | |
f117e3aa | 1027 | //Placing the FEE boards in the Mother volume of AIR |
c4561145 | 1028 | |
f117e3aa | 1029 | //Type A |
c4561145 | 1030 | |
c2518432 | 1031 | Float_t xFee; // X-position of FEE board |
1032 | Float_t yFee; // Y-position of FEE board | |
1033 | Float_t zFee = 0.0; // Z-position of FEE board | |
c4561145 | 1034 | |
c2518432 | 1035 | Float_t xA = 0.25; //distance from the border to 1st FEE board |
1036 | Float_t yA = 4.00; //distance from the border to 1st FEE board | |
1037 | Float_t xSepa = 1.70; //Distance between two FEE boards | |
1038 | Float_t ySepa = 8.00; //Distance between two FEE boards | |
c4561145 | 1039 | |
f117e3aa | 1040 | |
1041 | // FEE Boards EFEE placed inside EFBA | |
1042 | number = 1; | |
c2518432 | 1043 | yFee = dboxFEEBPlaneA[1] - yA; |
f117e3aa | 1044 | for (i = 1; i <= 6; ++i) |
1045 | { | |
c2518432 | 1046 | xFee = -dboxFEEBPlaneA[0] + xA; |
f117e3aa | 1047 | for (j = 1; j <= 12; ++j) |
1048 | { | |
c2518432 | 1049 | gMC->Gspos("EFEE", number, "EFBA", xFee,yFee,zFee, 0, "ONLY"); |
1050 | xFee += xSepa; | |
f117e3aa | 1051 | number += 1; |
1052 | } | |
c2518432 | 1053 | yFee -= ySepa; |
f117e3aa | 1054 | } |
1055 | // FEE Boards EFEE placed inside EFBB | |
1056 | number = 1; | |
c2518432 | 1057 | yFee = dboxFEEBPlaneB[1] - yA; |
f117e3aa | 1058 | for (i = 1; i <= 3; ++i) |
1059 | { | |
c2518432 | 1060 | xFee = -dboxFEEBPlaneB[0] + xA; |
f117e3aa | 1061 | for (j = 1; j <= 24; ++j) |
1062 | { | |
c2518432 | 1063 | gMC->Gspos("EFEE", number, "EFBB", xFee,yFee,zFee, 0, "ONLY"); |
1064 | xFee += xSepa; | |
f117e3aa | 1065 | number += 1; |
1066 | } | |
c2518432 | 1067 | yFee -= ySepa; |
f117e3aa | 1068 | } |
c4561145 | 1069 | |
c4561145 | 1070 | |
f117e3aa | 1071 | //Distance between the two backplanes of two UMs |
1072 | //in x-direction is 0.92 and ydirection is 0.95 | |
1073 | Float_t dboxEFSA[3]; | |
1074 | dboxEFSA[0] = 3.0*dboxFEEBPlaneA[0] + 0.92; | |
1075 | dboxEFSA[1] = 2.0*dboxFEEBPlaneA[1] + (0.95/2.0); | |
1076 | dboxEFSA[2] = dboxFEEBPlaneA[2]; | |
c4561145 | 1077 | |
f117e3aa | 1078 | //Type A |
1079 | gMC->Gsvolu("EFSA","BOX", idtmed[698],dboxEFSA, 3); | |
c4561145 | 1080 | |
f117e3aa | 1081 | //Distance between the two backplanes of two UMs |
1082 | //in x-direction is 0.92 and ydirection is 0.95 | |
1083 | Float_t dboxEFSB[3]; | |
1084 | dboxEFSB[0] = 2.0*dboxFEEBPlaneB[0] + (0.938/2.0); | |
1085 | dboxEFSB[1] = 3.0*dboxFEEBPlaneB[1] + 1.05; | |
1086 | dboxEFSB[2] = dboxFEEBPlaneB[2]; | |
c4561145 | 1087 | |
f117e3aa | 1088 | //Type A |
1089 | gMC->Gsvolu("EFSB","BOX", idtmed[698],dboxEFSB, 3); | |
c4561145 | 1090 | |
b1952773 | 1091 | |
f117e3aa | 1092 | Float_t xfs1,xfs2,xfs3,yfs1,yfs2,yfs3; |
1093 | xfs1 = -dboxEFSA[0] + dboxFEEBPlaneA[0]; | |
1094 | xfs2 = xfs1 + dboxFEEBPlaneA[0] + 0.92 + dboxFEEBPlaneA[0]; | |
1095 | xfs3 = xfs2 + dboxFEEBPlaneA[0] + 0.92 + dboxFEEBPlaneA[0]; | |
1096 | yfs1 = dboxEFSA[1] - dboxFEEBPlaneA[1]; | |
1097 | yfs2 = yfs1 - dboxFEEBPlaneA[1] - 0.95 - dboxFEEBPlaneA[1]; | |
c4561145 | 1098 | |
c4561145 | 1099 | |
c4561145 | 1100 | |
f117e3aa | 1101 | gMC->Gspos("EFBA", 1, "EFSA", xfs1, yfs1, 0., 0, "ONLY"); |
1102 | gMC->Gspos("EFBA", 2, "EFSA", xfs2, yfs1, 0., 0, "ONLY"); | |
1103 | gMC->Gspos("EFBA", 3, "EFSA", xfs3, yfs1, 0., 0, "ONLY"); | |
1104 | gMC->Gspos("EFBA", 4, "EFSA", xfs1, yfs2, 0., 0, "ONLY"); | |
1105 | gMC->Gspos("EFBA", 5, "EFSA", xfs2, yfs2, 0., 0, "ONLY"); | |
1106 | gMC->Gspos("EFBA", 6, "EFSA", xfs3, yfs2, 0., 0, "ONLY"); | |
c4561145 | 1107 | |
1108 | ||
f117e3aa | 1109 | //Type B positioning |
c4561145 | 1110 | |
f117e3aa | 1111 | xfs1 = -dboxEFSB[0] + dboxFEEBPlaneB[0]; |
1112 | xfs2 = xfs1 + dboxFEEBPlaneB[0] + 0.938 + dboxFEEBPlaneB[0]; | |
1113 | yfs1 = dboxEFSB[1] - dboxFEEBPlaneB[1]; | |
1114 | yfs2 = yfs1 - dboxFEEBPlaneB[1] - 1.05 - dboxFEEBPlaneB[1]; | |
1115 | yfs3 = yfs2 - dboxFEEBPlaneB[1] - 1.05 - dboxFEEBPlaneB[1]; | |
c4561145 | 1116 | |
c4561145 | 1117 | |
1118 | ||
f117e3aa | 1119 | gMC->Gspos("EFBB", 1, "EFSB", xfs1, yfs1, 0., 0, "ONLY"); |
1120 | gMC->Gspos("EFBB", 2, "EFSB", xfs2, yfs1, 0., 0, "ONLY"); | |
1121 | gMC->Gspos("EFBB", 3, "EFSB", xfs1, yfs2, 0., 0, "ONLY"); | |
1122 | gMC->Gspos("EFBB", 4, "EFSB", xfs2, yfs2, 0., 0, "ONLY"); | |
1123 | gMC->Gspos("EFBB", 5, "EFSB", xfs1, yfs3, 0., 0, "ONLY"); | |
1124 | gMC->Gspos("EFBB", 6, "EFSB", xfs2, yfs3, 0., 0, "ONLY"); | |
c4561145 | 1125 | |
c4561145 | 1126 | |
c4561145 | 1127 | } |
1128 | ||
1129 | //_____________________________________________________________________________ | |
1130 | ||
1131 | void AliPMDv1::CreatePMD() | |
1132 | { | |
1133 | // | |
1134 | // Create final detector from supermodules | |
b1952773 | 1135 | // -- Author : Bedanga and Viyogi June 2003 |
c4561145 | 1136 | |
f117e3aa | 1137 | Float_t zp; |
c4561145 | 1138 | Int_t jhrot12,jhrot13, irotdm; |
c4561145 | 1139 | Int_t *idtmed = fIdtmed->GetArray()-599; |
1140 | ||
b1952773 | 1141 | //VOLUMES Names : begining with "E" for all PMD volumes, |
1142 | ||
f117e3aa | 1143 | // --- DEFINE Iron volumes for SM A |
b1952773 | 1144 | // Fe Support |
36031625 | 1145 | Float_t dboxFea[3]; |
3cdb4e97 | 1146 | dboxFea[0] = fSMLengthax; |
1147 | dboxFea[1] = fSMLengthay; | |
1148 | dboxFea[2] = fgkThSteel/2.; | |
c4561145 | 1149 | |
36031625 | 1150 | gMC->Gsvolu("EFEA","BOX", idtmed[618], dboxFea, 3); |
c4561145 | 1151 | |
f117e3aa | 1152 | // --- DEFINE Iron volumes for SM B |
b1952773 | 1153 | |
1154 | // Fe Support | |
36031625 | 1155 | Float_t dboxFeb[3]; |
3cdb4e97 | 1156 | dboxFeb[0] = fSMLengthbx; |
1157 | dboxFeb[1] = fSMLengthby; | |
1158 | dboxFeb[2] = fgkThSteel/2.; | |
b1952773 | 1159 | |
36031625 | 1160 | gMC->Gsvolu("EFEB","BOX", idtmed[618], dboxFeb, 3); |
c4561145 | 1161 | |
c4561145 | 1162 | AliMatrix(irotdm, 90., 0., 90., 90., 180., 0.); |
b1952773 | 1163 | AliMatrix(jhrot12, 90., 180., 90., 270., 0., 0.); |
c4561145 | 1164 | AliMatrix(jhrot13, 90., 240., 90., 330., 0., 0.); |
1165 | ||
a978c9e3 | 1166 | // Gaspmd, the dimension of RECTANGULAR mother volume of PMD, |
1167 | // Four mother volumes EPM1,EPM2 for A-type and | |
1168 | // volumes EPM3 and EPM4 for B-type. Four to create a hole | |
1169 | // and avoid overlap with beam pipe | |
1170 | ||
1171 | Float_t gaspmd[3]; | |
f117e3aa | 1172 | gaspmd[0] = fSMLengthax; |
1173 | gaspmd[1] = fSMLengthay; | |
1174 | gaspmd[2] = fSMthick; | |
a978c9e3 | 1175 | |
1176 | gMC->Gsvolu("EPM1", "BOX", idtmed[698], gaspmd, 3); | |
a978c9e3 | 1177 | gMC->Gsvolu("EPM2", "BOX", idtmed[698], gaspmd, 3); |
b1952773 | 1178 | |
1179 | //Complete detector for Type A | |
1180 | //Position Super modules type A for both CPV and PMD in EPMD | |
f117e3aa | 1181 | Float_t zpsa,zpba,zfea,zcva,zfee; |
36031625 | 1182 | |
a978c9e3 | 1183 | // zpsa = - gaspmd[2] + fSMthick/2.; |
1184 | // -2.5 is given to place PMD at -361.5 | |
1185 | // BM : In future after putting proper electronics | |
1186 | // -2.5 will be replaced by -gaspmd[2] | |
f117e3aa | 1187 | |
1188 | //TYPE A | |
1189 | //Fee board | |
1190 | zfee=-gaspmd[2] + 1.2; | |
1191 | gMC->Gspos("EFSA", 1, "EPM1", 0., 0., zfee, 0, "ONLY"); | |
1192 | gMC->Gspos("EFSA", 2, "EPM2", 0., 0., zfee, jhrot12, "ONLY"); | |
1193 | //VETO | |
1194 | zcva = zfee + 1.2 + fDthick; | |
1195 | gMC->Gspos("EMVA", 1, "EPM1", 0., 0., zcva, 0, "ONLY"); | |
1196 | gMC->Gspos("EMVA", 2, "EPM2", 0., 0., zcva, jhrot12, "ONLY"); | |
1197 | //Iron support | |
1198 | zfea = zcva + fDthick + fgkThSteel/2.; | |
a978c9e3 | 1199 | gMC->Gspos("EFEA", 1, "EPM1", 0., 0., zfea, 0, "ONLY"); |
1200 | gMC->Gspos("EFEA", 2, "EPM2", 0., 0., zfea, 0, "ONLY"); | |
f117e3aa | 1201 | //Lead |
1202 | zpba=zfea+fgkThSteel/2.+ fgkThLead/2.; | |
1203 | gMC->Gspos("ESPA", 1, "EPM1", 0., 0., zpba, 0, "ONLY"); | |
1204 | gMC->Gspos("ESPA", 2, "EPM2", 0., 0., zpba, 0, "ONLY"); | |
1205 | //Preshower | |
1206 | zpsa = zpba + fgkThLead/2. + fDthick; | |
1207 | gMC->Gspos("ESMA", 1, "EPM1", 0., 0., zpsa, 0, "ONLY"); | |
1208 | gMC->Gspos("ESMA", 2, "EPM2", 0., 0., zpsa, jhrot12, "ONLY"); | |
1209 | //FEE boards | |
1210 | zfee=zpsa + fDthick + 1.2; | |
1211 | gMC->Gspos("EFSA", 3, "EPM1", 0., 0., zfee, 0, "ONLY"); | |
1212 | gMC->Gspos("EFSA", 4, "EPM2", 0., 0., zfee, jhrot12, "ONLY"); | |
1213 | ||
b1952773 | 1214 | |
f117e3aa | 1215 | //TYPE - B |
1216 | gaspmd[0] = fSMLengthbx; | |
1217 | gaspmd[1] = fSMLengthby; | |
1218 | gaspmd[2] = fSMthick; | |
a978c9e3 | 1219 | |
1220 | gMC->Gsvolu("EPM3", "BOX", idtmed[698], gaspmd, 3); | |
a978c9e3 | 1221 | gMC->Gsvolu("EPM4", "BOX", idtmed[698], gaspmd, 3); |
a978c9e3 | 1222 | |
b1952773 | 1223 | //Complete detector for Type B |
1224 | //Position Super modules type B for both CPV and PMD in EPMD | |
36031625 | 1225 | Float_t zpsb,zpbb,zfeb,zcvb; |
a978c9e3 | 1226 | // zpsb = - gaspmd[2] + fSMthick/2.; |
1227 | // -2.5 is given to place PMD at -361.5 | |
1228 | // BM: In future after putting proper electronics | |
1229 | // -2.5 will be replaced by -gaspmd[2] | |
1230 | ||
f117e3aa | 1231 | //Fee board |
1232 | zfee=-gaspmd[2] + 1.2; | |
1233 | gMC->Gspos("EFSB", 5, "EPM3", 0., 0., zfee, 0, "ONLY"); | |
1234 | gMC->Gspos("EFSB", 6, "EPM4", 0., 0., zfee, jhrot12, "ONLY"); | |
1235 | //VETO | |
1236 | zcvb= zfee + 1.2 + fDthick; | |
1237 | gMC->Gspos("EMVB", 3, "EPM3", 0., 0., zcvb, 0, "ONLY"); | |
1238 | gMC->Gspos("EMVB", 4, "EPM4", 0., 0., zcvb, jhrot12, "ONLY"); | |
1239 | ||
1240 | //IRON SUPPORT | |
1241 | zfeb= zcvb + fDthick + fgkThSteel/2.; | |
a978c9e3 | 1242 | gMC->Gspos("EFEB", 3, "EPM3", 0., 0., zfeb, 0, "ONLY"); |
1243 | gMC->Gspos("EFEB", 4, "EPM4", 0., 0., zfeb, 0, "ONLY"); | |
f117e3aa | 1244 | //LEAD |
1245 | zpbb= zfeb + fgkThSteel/2.+ fgkThLead/2.; | |
1246 | gMC->Gspos("ESPB", 3, "EPM3", 0., 0., zpbb, 0, "ONLY"); | |
1247 | gMC->Gspos("ESPB", 4, "EPM4", 0., 0., zpbb, 0, "ONLY"); | |
1248 | //PRESHOWER | |
1249 | zpsb = zpbb + fgkThLead/2.+ fDthick; | |
1250 | gMC->Gspos("ESMB", 3, "EPM3", 0., 0., zpsb, 0, "ONLY"); | |
1251 | gMC->Gspos("ESMB", 4, "EPM4", 0., 0., zpsb, jhrot12, "ONLY"); | |
1252 | //FEE boards | |
1253 | zfee=zpsb + fDthick + 1.2; | |
1254 | gMC->Gspos("EFSB", 7, "EPM3", 0., 0., zfee, 0, "ONLY"); | |
1255 | gMC->Gspos("EFSB", 8, "EPM4", 0., 0., zfee, jhrot12, "ONLY"); | |
1256 | ||
1257 | ||
c4561145 | 1258 | // --- Place the EPMD in ALICE |
f117e3aa | 1259 | //Z-distance of PMD from Interaction Point |
3cdb4e97 | 1260 | zp = fgkZdist; |
b1952773 | 1261 | |
f117e3aa | 1262 | //X and Y-positions of the PMD planes |
1263 | Float_t xfinal,yfinal; | |
a978c9e3 | 1264 | Float_t xsmb,ysmb; |
f117e3aa | 1265 | Float_t xsma,ysma; |
a978c9e3 | 1266 | |
f117e3aa | 1267 | xfinal = fSMLengthax + 0.48/2 + fSMLengthbx; |
1268 | yfinal = fSMLengthay + 0.20/2 + fSMLengthby; | |
1269 | ||
1270 | ||
1271 | xsma = xfinal - fSMLengthax; | |
1272 | ysma = yfinal - fSMLengthay; | |
1273 | xsmb = -xfinal + fSMLengthbx; | |
1274 | ysmb = yfinal - fSMLengthby; | |
1275 | ||
1276 | ||
1277 | //Position Full PMD in ALICE | |
1278 | // | |
1279 | // EPM1 EPM3 | |
1280 | // | |
1281 | // EPM4 EPM2 | |
1282 | // (rotated (rotated EPM1) | |
1283 | // EPM3) | |
1284 | // | |
1285 | gMC->Gspos("EPM1", 1, "ALIC", xsma,ysma,zp, 0, "ONLY"); | |
a978c9e3 | 1286 | gMC->Gspos("EPM2", 1, "ALIC", -xsma,-ysma,zp, 0, "ONLY"); |
f117e3aa | 1287 | gMC->Gspos("EPM3", 1, "ALIC", xsmb,ysmb,zp, 0, "ONLY"); |
a978c9e3 | 1288 | gMC->Gspos("EPM4", 1, "ALIC", -xsmb,-ysmb,zp, 0, "ONLY"); |
c4561145 | 1289 | } |
1290 | ||
1291 | ||
1292 | //_____________________________________________________________________________ | |
36031625 | 1293 | void AliPMDv1::DrawModule() const |
c4561145 | 1294 | { |
c4561145 | 1295 | // Draw a shaded view of the Photon Multiplicity Detector |
1296 | // | |
36031625 | 1297 | // cout << " Inside Draw Modules " << endl; |
c4561145 | 1298 | |
1299 | gMC->Gsatt("*", "seen", -1); | |
1300 | gMC->Gsatt("alic", "seen", 0); | |
1301 | // | |
1302 | // Set the visibility of the components | |
1303 | // | |
1304 | gMC->Gsatt("ECAR","seen",0); | |
1305 | gMC->Gsatt("ECCU","seen",1); | |
b1952773 | 1306 | gMC->Gsatt("EST1","seen",1); |
1307 | gMC->Gsatt("EST2","seen",1); | |
1308 | gMC->Gsatt("EUM1","seen",1); | |
1309 | gMC->Gsatt("EUM2","seen",1); | |
1310 | gMC->Gsatt("ESMA","seen",1); | |
1311 | gMC->Gsatt("EPMD","seen",1); | |
c4561145 | 1312 | // |
1313 | gMC->Gdopt("hide", "on"); | |
1314 | gMC->Gdopt("shad", "on"); | |
1315 | gMC->Gsatt("*", "fill", 7); | |
1316 | gMC->SetClipBox("."); | |
1317 | gMC->SetClipBox("*", 0, 3000, -3000, 3000, -6000, 6000); | |
1318 | gMC->DefaultRange(); | |
1319 | gMC->Gdraw("alic", 40, 30, 0, 22, 20.5, .02, .02); | |
1320 | gMC->Gdhead(1111, "Photon Multiplicity Detector Version 1"); | |
1321 | ||
1322 | //gMC->Gdman(17, 5, "MAN"); | |
1323 | gMC->Gdopt("hide", "off"); | |
b1952773 | 1324 | |
bff3a244 | 1325 | AliDebug(1,"Outside Draw Modules"); |
c4561145 | 1326 | } |
1327 | ||
1328 | //_____________________________________________________________________________ | |
1329 | void AliPMDv1::CreateMaterials() | |
1330 | { | |
c4561145 | 1331 | // Create materials for the PMD |
1332 | // | |
1333 | // ORIGIN : Y. P. VIYOGI | |
1334 | // | |
36031625 | 1335 | // cout << " Inside create materials " << endl; |
f017d70a | 1336 | |
c4561145 | 1337 | Int_t isxfld = gAlice->Field()->Integ(); |
1338 | Float_t sxmgmx = gAlice->Field()->Max(); | |
1339 | ||
1340 | // --- Define the various materials for GEANT --- | |
f017d70a | 1341 | |
c4561145 | 1342 | AliMaterial(1, "Pb $", 207.19, 82., 11.35, .56, 18.5); |
f017d70a | 1343 | |
1344 | // Argon | |
1345 | ||
1346 | Float_t dAr = 0.001782; // --- Ar density in g/cm3 --- | |
1347 | Float_t x0Ar = 19.55 / dAr; | |
1348 | AliMaterial(2, "Argon$", 39.95, 18., dAr, x0Ar, 6.5e4); | |
1349 | ||
1350 | // --- CO2 --- | |
1351 | ||
1352 | Float_t aCO2[2] = { 12.,16. }; | |
1353 | Float_t zCO2[2] = { 6.,8. }; | |
1354 | Float_t wCO2[2] = { 1.,2. }; | |
1355 | Float_t dCO2 = 0.001977; | |
1356 | AliMixture(3, "CO2 $", aCO2, zCO2, dCO2, -2, wCO2); | |
1357 | ||
c4561145 | 1358 | AliMaterial(4, "Al $", 26.98, 13., 2.7, 8.9, 18.5); |
f017d70a | 1359 | |
1360 | // ArCO2 | |
1361 | ||
1362 | Float_t aArCO2[3] = {39.948,12.0107,15.9994}; | |
1363 | Float_t zArCO2[3] = {18.,6.,8.}; | |
1364 | Float_t wArCO2[3] = {0.7,0.08,0.22}; | |
1365 | Float_t dArCO2 = dAr * 0.7 + dCO2 * 0.3; | |
1366 | AliMixture(5, "ArCO2$", aArCO2, zArCO2, dArCO2, 3, wArCO2); | |
1367 | ||
c4561145 | 1368 | AliMaterial(6, "Fe $", 55.85, 26., 7.87, 1.76, 18.5); |
f017d70a | 1369 | |
1370 | // G10 | |
c4561145 | 1371 | |
f017d70a | 1372 | Float_t aG10[4]={1.,12.011,15.9994,28.086}; |
1373 | Float_t zG10[4]={1.,6.,8.,14.}; | |
d49fe99a | 1374 | Float_t wG10[4]={0.15201,0.10641,0.49444,0.24714}; |
f017d70a | 1375 | AliMixture(8,"G10",aG10,zG10,1.7,4,wG10); |
c4561145 | 1376 | |
f017d70a | 1377 | AliMaterial(15, "Cu $", 63.54, 29., 8.96, 1.43, 15.); |
1378 | ||
1379 | // Steel | |
1380 | Float_t aSteel[4] = { 55.847,51.9961,58.6934,28.0855 }; | |
1381 | Float_t zSteel[4] = { 26.,24.,28.,14. }; | |
1382 | Float_t wSteel[4] = { .715,.18,.1,.005 }; | |
1383 | Float_t dSteel = 7.88; | |
1384 | AliMixture(19, "STAINLESS STEEL$", aSteel, zSteel, dSteel, 4, wSteel); | |
1385 | ||
1386 | //Air | |
1387 | ||
1388 | Float_t aAir[4]={12.0107,14.0067,15.9994,39.948}; | |
1389 | Float_t zAir[4]={6.,7.,8.,18.}; | |
1390 | Float_t wAir[4]={0.000124,0.755267,0.231781,0.012827}; | |
1391 | Float_t dAir1 = 1.20479E-10; | |
1392 | Float_t dAir = 1.20479E-3; | |
1393 | AliMixture(98, "Vacum$", aAir, zAir, dAir1, 4, wAir); | |
1394 | AliMixture(99, "Air $", aAir, zAir, dAir , 4, wAir); | |
1395 | ||
c4561145 | 1396 | // Define tracking media |
f017d70a | 1397 | AliMedium(1, "Pb conv.$", 1, 0, 0, isxfld, sxmgmx, 1., .1, .01, .1); |
1398 | AliMedium(4, "Al $", 4, 0, 0, isxfld, sxmgmx, .1, .1, .01, .1); | |
1399 | AliMedium(5, "ArCO2 $", 5, 1, 0, isxfld, sxmgmx, .1, .1, .10, .1); | |
1400 | AliMedium(6, "Fe $", 6, 0, 0, isxfld, sxmgmx, .1, .1, .01, .1); | |
1401 | AliMedium(8, "G10plate$", 8, 0, 0, isxfld, sxmgmx, 1., .1, .01, .1); | |
1402 | AliMedium(15, "Cu $", 15, 0, 0, isxfld, sxmgmx, .1, .1, .01, .1); | |
1403 | AliMedium(19, "S steel$", 19, 0, 0, isxfld, sxmgmx, 1., .1, .01, .1); | |
1404 | AliMedium(98, "Vacuum $", 98, 0, 0, isxfld, sxmgmx, 1., .1, .10, 10); | |
1405 | AliMedium(99, "Air gaps$", 99, 0, 0, isxfld, sxmgmx, 1., .1, .10, .1); | |
c4561145 | 1406 | |
7235aed2 | 1407 | AliDebug(1,"Outside create materials"); |
1408 | ||
1409 | } | |
1410 | ||
1411 | //_____________________________________________________________________________ | |
1412 | void AliPMDv1::Init() | |
1413 | { | |
1414 | // | |
1415 | // Initialises PMD detector after it has been built | |
1416 | // | |
1417 | ||
1418 | // | |
1419 | AliDebug(2,"Inside Init"); | |
1420 | AliDebug(2,"PMD simulation package (v1) initialised"); | |
1421 | AliDebug(2,"parameters of pmd"); | |
1422 | AliDebug(2,Form("%10.2f %10.2f %10.2f %10.2f\n", | |
1423 | fgkCellRadius,fgkCellWall,fgkCellDepth,fgkZdist)); | |
1424 | Int_t *idtmed = fIdtmed->GetArray()-599; | |
1425 | fMedSens=idtmed[605-1]; | |
c4561145 | 1426 | // --- Generate explicitly delta rays in the iron, aluminium and lead --- |
1427 | gMC->Gstpar(idtmed[600], "LOSS", 3.); | |
1428 | gMC->Gstpar(idtmed[600], "DRAY", 1.); | |
1429 | ||
1430 | gMC->Gstpar(idtmed[603], "LOSS", 3.); | |
1431 | gMC->Gstpar(idtmed[603], "DRAY", 1.); | |
1432 | ||
1433 | gMC->Gstpar(idtmed[604], "LOSS", 3.); | |
1434 | gMC->Gstpar(idtmed[604], "DRAY", 1.); | |
1435 | ||
1436 | gMC->Gstpar(idtmed[605], "LOSS", 3.); | |
1437 | gMC->Gstpar(idtmed[605], "DRAY", 1.); | |
1438 | ||
c4561145 | 1439 | gMC->Gstpar(idtmed[607], "LOSS", 3.); |
1440 | gMC->Gstpar(idtmed[607], "DRAY", 1.); | |
1441 | ||
1442 | // --- Energy cut-offs in the Pb and Al to gain time in tracking --- | |
1443 | // --- without affecting the hit patterns --- | |
1444 | gMC->Gstpar(idtmed[600], "CUTGAM", 1e-4); | |
1445 | gMC->Gstpar(idtmed[600], "CUTELE", 1e-4); | |
1446 | gMC->Gstpar(idtmed[600], "CUTNEU", 1e-4); | |
1447 | gMC->Gstpar(idtmed[600], "CUTHAD", 1e-4); | |
f017d70a | 1448 | |
c4561145 | 1449 | gMC->Gstpar(idtmed[605], "CUTGAM", 1e-4); |
1450 | gMC->Gstpar(idtmed[605], "CUTELE", 1e-4); | |
1451 | gMC->Gstpar(idtmed[605], "CUTNEU", 1e-4); | |
1452 | gMC->Gstpar(idtmed[605], "CUTHAD", 1e-4); | |
f017d70a | 1453 | |
c4561145 | 1454 | gMC->Gstpar(idtmed[603], "CUTGAM", 1e-4); |
1455 | gMC->Gstpar(idtmed[603], "CUTELE", 1e-4); | |
1456 | gMC->Gstpar(idtmed[603], "CUTNEU", 1e-4); | |
1457 | gMC->Gstpar(idtmed[603], "CUTHAD", 1e-4); | |
d49fe99a | 1458 | // gMC->Gstpar(idtmed[609], "CUTGAM", 1e-4); |
1459 | // gMC->Gstpar(idtmed[609], "CUTELE", 1e-4); | |
1460 | // gMC->Gstpar(idtmed[609], "CUTNEU", 1e-4); | |
1461 | // gMC->Gstpar(idtmed[609], "CUTHAD", 1e-4); | |
c4561145 | 1462 | // --- Prevent particles stopping in the gas due to energy cut-off --- |
1463 | gMC->Gstpar(idtmed[604], "CUTGAM", 1e-5); | |
1464 | gMC->Gstpar(idtmed[604], "CUTELE", 1e-5); | |
1465 | gMC->Gstpar(idtmed[604], "CUTNEU", 1e-5); | |
1466 | gMC->Gstpar(idtmed[604], "CUTHAD", 1e-5); | |
1467 | gMC->Gstpar(idtmed[604], "CUTMUO", 1e-5); | |
8d6dc7c8 | 1468 | // Visualization of volumes |
1469 | gMC->Gsatt("ECAR", "SEEN", 0); | |
1470 | gMC->Gsatt("ECCU", "SEEN", 0); | |
1471 | gMC->Gsatt("ECCU", "COLO", 4); | |
1472 | gMC->Gsatt("EST1", "SEEN", 0); | |
1473 | gMC->Gsatt("EST2", "SEEN", 0); | |
1474 | gMC->Gsatt("EHC1", "SEEN", 0); | |
1475 | gMC->Gsatt("EHC2", "SEEN", 0); | |
1476 | gMC->Gsatt("EPCA", "SEEN", 0); | |
1477 | gMC->Gsatt("EBKA", "SEEN", 0); | |
1478 | gMC->Gsatt("ECGA", "SEEN", 0); | |
1479 | gMC->Gsatt("ECVA", "SEEN", 0); | |
1480 | gMC->Gsatt("EDGA", "SEEN", 0); | |
1481 | gMC->Gsatt("EDVA", "SEEN", 0); | |
1482 | gMC->Gsatt("ESSA", "SEEN", 0); | |
1483 | gMC->Gsatt("ESVA", "SEEN", 0); | |
1484 | gMC->Gsatt("EUM1", "SEEN", 0); | |
1485 | gMC->Gsatt("EUV1", "SEEN", 0); | |
1486 | gMC->Gsatt("EBPA", "SEEN", 0); | |
1487 | gMC->Gsatt("EPCB", "SEEN", 0); | |
1488 | gMC->Gsatt("EBKB", "SEEN", 0); | |
1489 | gMC->Gsatt("ECGB", "SEEN", 0); | |
1490 | gMC->Gsatt("ECVB", "SEEN", 0); | |
1491 | gMC->Gsatt("EDGB", "SEEN", 0); | |
1492 | gMC->Gsatt("EDVB", "SEEN", 0); | |
1493 | gMC->Gsatt("ESSB", "SEEN", 0); | |
1494 | gMC->Gsatt("ESVB", "SEEN", 0); | |
1495 | gMC->Gsatt("EUM2", "SEEN", 0); | |
1496 | gMC->Gsatt("EUV2", "SEEN", 0); | |
1497 | gMC->Gsatt("EBPB", "SEEN", 0); | |
1498 | gMC->Gsatt("EPB1", "SEEN", 0); | |
1499 | gMC->Gsatt("EPB2", "SEEN", 0); | |
1500 | gMC->Gsatt("ESMA", "SEEN", 0); | |
1501 | gMC->Gsatt("EMVA", "SEEN", 0); | |
1502 | gMC->Gsatt("ESMB", "SEEN", 0); | |
1503 | gMC->Gsatt("EMVB", "SEEN", 0); | |
1504 | gMC->Gsatt("ESPA", "SEEN", 0); | |
1505 | gMC->Gsatt("ESPB", "SEEN", 0); | |
1506 | gMC->Gsatt("EFEE", "SEEN", 0); | |
1507 | gMC->Gsatt("EFEE", "COLO", 4); | |
1508 | gMC->Gsatt("EFBA", "SEEN", 0); | |
1509 | gMC->Gsatt("EFBB", "SEEN", 0); | |
1510 | gMC->Gsatt("EFSA", "SEEN", 0); | |
1511 | gMC->Gsatt("EFSB", "SEEN", 0); | |
1512 | gMC->Gsatt("EFEA", "SEEN", 0); | |
1513 | gMC->Gsatt("EFEB", "SEEN", 0); | |
1514 | gMC->Gsatt("EPM1", "SEEN", 1); | |
1515 | gMC->Gsatt("EPM2", "SEEN", 1); | |
1516 | gMC->Gsatt("EPM3", "SEEN", 1); | |
1517 | gMC->Gsatt("EPM4", "SEEN", 1); | |
c4561145 | 1518 | } |
1519 | ||
1520 | //_____________________________________________________________________________ | |
1521 | void AliPMDv1::StepManager() | |
1522 | { | |
1523 | // | |
1524 | // Called at each step in the PMD | |
1525 | // | |
b1952773 | 1526 | |
c4561145 | 1527 | Int_t copy; |
1528 | Float_t hits[4], destep; | |
1529 | Float_t center[3] = {0,0,0}; | |
f117e3aa | 1530 | Int_t vol[10]; |
1531 | // const char *namep; | |
c4561145 | 1532 | |
f335f3e7 | 1533 | if(gMC->CurrentMedium() == fMedSens && (destep = gMC->Edep())) { |
c4561145 | 1534 | |
1535 | gMC->CurrentVolID(copy); | |
f117e3aa | 1536 | // namep=gMC->CurrentVolName(); |
1537 | // printf("Current vol is %s \n",namep); | |
c4561145 | 1538 | vol[0]=copy; |
c4561145 | 1539 | |
b1952773 | 1540 | gMC->CurrentVolOffID(1,copy); |
c4561145 | 1541 | //namep=gMC->CurrentVolOffName(1); |
f117e3aa | 1542 | // printf("Current vol 11 is %s \n",namep); |
c4561145 | 1543 | vol[1]=copy; |
c4561145 | 1544 | |
b1952773 | 1545 | gMC->CurrentVolOffID(2,copy); |
c4561145 | 1546 | //namep=gMC->CurrentVolOffName(2); |
1547 | //printf("Current vol 22 is %s \n",namep); | |
c4561145 | 1548 | vol[2]=copy; |
1549 | ||
1550 | // if(strncmp(namep,"EHC1",4))vol[2]=1; | |
1551 | ||
1552 | gMC->CurrentVolOffID(3,copy); | |
f117e3aa | 1553 | // namep=gMC->CurrentVolOffName(3); |
c4561145 | 1554 | //printf("Current vol 33 is %s \n",namep); |
c4561145 | 1555 | vol[3]=copy; |
c4561145 | 1556 | |
b1952773 | 1557 | gMC->CurrentVolOffID(4,copy); |
f117e3aa | 1558 | // namep=gMC->CurrentVolOffName(4); |
1559 | // printf("Current vol 44 is %s \n",namep); | |
c4561145 | 1560 | vol[4]=copy; |
c4561145 | 1561 | |
b1952773 | 1562 | gMC->CurrentVolOffID(5,copy); |
f117e3aa | 1563 | // namep=gMC->CurrentVolOffName(5); |
1564 | // printf("Current vol 55 is %s \n",namep); | |
b1952773 | 1565 | vol[5]=copy; |
1566 | ||
1567 | gMC->CurrentVolOffID(6,copy); | |
f117e3aa | 1568 | // namep=gMC->CurrentVolOffName(6); |
1569 | // printf("Current vol 66 is %s \n",namep); | |
b1952773 | 1570 | vol[6]=copy; |
1571 | ||
1572 | gMC->CurrentVolOffID(7,copy); | |
f117e3aa | 1573 | // namep=gMC->CurrentVolOffName(7); |
1574 | // printf("Current vol 77 is %s \n",namep); | |
b1952773 | 1575 | vol[7]=copy; |
1576 | ||
f117e3aa | 1577 | gMC->CurrentVolOffID(8,copy); |
1578 | // namep=gMC->CurrentVolOffName(8); | |
1579 | // printf("Current vol 88 is %s \n",namep); | |
1580 | vol[8]=copy; | |
b1952773 | 1581 | |
f117e3aa | 1582 | |
1583 | gMC->CurrentVolOffID(9,copy); | |
1584 | // namep=gMC->CurrentVolOffName(9); | |
1585 | // printf("Current vol 99 is %s \n",namep); | |
1586 | vol[9]=copy; | |
1587 | ||
1588 | ||
1589 | // printf("volume number %4d %4d %4d %4d %4d %4d %4d %4d %4d %4d %10.3f \n",vol[0],vol[1],vol[2],vol[3],vol[4],vol[5],vol[6],vol[7],vol[8],vol[9],destep*1000000); | |
b1952773 | 1590 | |
c4561145 | 1591 | gMC->Gdtom(center,hits,1); |
1592 | hits[3] = destep*1e9; //Number in eV | |
5d12ce38 | 1593 | AddHit(gAlice->GetMCApp()->GetCurrentTrackNumber(), vol, hits); |
b1952773 | 1594 | |
c4561145 | 1595 | } |
1596 | } | |
1597 | ||
1598 | ||
1599 | //------------------------------------------------------------------------ | |
1600 | // Get parameters | |
1601 | ||
1602 | void AliPMDv1::GetParameters() | |
1603 | { | |
36031625 | 1604 | // This gives all the parameters of the detector |
3cdb4e97 | 1605 | // such as Length of Supermodules, type A, type B, |
1606 | // thickness of the Supermodule | |
b1952773 | 1607 | // |
36031625 | 1608 | |
f117e3aa | 1609 | fSMLengthax = 32.7434; |
1610 | //The total length in X is due to the following components | |
1611 | // Factor 3 is because of 3 module length in X for this type | |
1612 | // fgkNcolUM1*fgkCellRadius (48 x 0.25): Total span of each module in X | |
1613 | // fgkCellRadius/2. : There is offset of 1/2 cell | |
1614 | // 0.05+0.05 : Insulation gaps etc | |
1615 | // fgkSSBoundary (0.3) : Boundary frame | |
1616 | // double XA = 3.0*((fgkCellRadius/fgkSqroot3by2*fgkNcolUM1)-(fgkCellRadius*fgkSqroot3*(fgkNcolUM1-1)/6.)+(2.0*fgkGap)+(2.0*fgkGap)+fgkSSBoundary) + (2.0*0.075); | |
1617 | ||
1618 | fSMLengthbx = 42.5886; | |
1619 | //The total length in X is due to the following components | |
1620 | // Factor 2 is because of 2 module length in X for this type | |
1621 | // fgkNcolUM2*fgkCellRadius (96 x 0.25): Total span of each module in X | |
1622 | // fgkCellRadius/2. : There is offset of 1/2 cell | |
1623 | // 0.05+0.05 : Insulation gaps etc | |
1624 | // fgkSSBoundary (0.3) : Boundary frame | |
1625 | //double XB = 2.0*((fgkCellRadius/fgkSqroot3by2*fgkNcolUM2)-(fgkCellRadius*fgkSqroot3*(fgkNcolUM2-1)/6.)+(2.0*fgkGap)+(2.0*fgkGap)+fgkSSBoundary) + 0.075; | |
1626 | ||
1627 | ||
1628 | ||
1629 | fSMLengthay = 49.1; | |
1630 | //The total length in Y is due to the following components | |
1631 | // Factor 2 is because of 2 module length in Y for this type | |
1632 | // fgkCellRadius/fgkSqroot3by2)*fgkNrowUM1 (0.25/sqrt3/2 * 96): Total span of each module in Y | |
1633 | // of strips | |
1634 | // 0.05+0.05 : Insulation gaps etc | |
1635 | // fgkSSBoundary (0.3) : Boundary frame | |
1636 | // double YA = 2.0*(fgkNrowUM1*fgkCellRadius+fgkCellRadius/2.+(2.0*fgkGap)+(2.0*fgkGap)+fgkSSBoundary) + 0.05; | |
1637 | ||
1638 | fSMLengthby = 37.675; | |
1639 | //The total length in Y is due to the following components | |
1640 | // Factor 3 is because of 3 module length in Y for this type | |
1641 | // fgkCellRadius/fgkSqroot3by2)*fgkNrowUM2 (0.25/sqrt3/2 * 48): Total span of each module in Y | |
1642 | // of strips | |
1643 | // 0.05+0.05 : Insulation gaps etc | |
1644 | // fgkSSBoundary (0.3) : Boundary frame | |
1645 | //double YB = 3.0*((fgkNrowUM2*fgkCellRadius + fgkCellRadius/2.)+(2.0*fgkGap)+(2.0*fgkGap)+fgkSSBoundary) + (2.0*0.05); | |
1646 | ||
1647 | ||
1648 | //Thickness of a pre/veto plane | |
1649 | fDthick = fgkThSS/2. +0.15; | |
1650 | ||
1651 | //Thickness of the PMD ; 2.4 added for FEE boards | |
1652 | fSMthick = 2.0*(fgkThSS/2. +0.15) | |
1653 | +fgkThSteel/2.+fgkThLead/2.0 + 2.4; | |
1654 | ||
1655 | ||
36031625 | 1656 | |
b1952773 | 1657 | } |
4b6f3b17 | 1658 | // --------------------------------------------------------------- |
1659 | void AliPMDv1::AddAlignableVolumes() const | |
1660 | { | |
1661 | // | |
1662 | // Create entries for alignable volumes associating the symbolic volume | |
1663 | // name with the corresponding volume path. Needs to be syncronized with | |
1664 | // eventual changes in the geometry. | |
1665 | // | |
1666 | SetSectorAlignable(); | |
1667 | ||
1668 | } | |
1669 | // ---------------------------------------------------------------- | |
1670 | void AliPMDv1::SetSectorAlignable() const | |
1671 | { | |
3cf8979e | 1672 | // |
4b6f3b17 | 1673 | |
1674 | TString vpsector = "ALIC_1/EPM"; | |
1675 | TString vpappend = "_1"; | |
1676 | ||
1677 | TString snsector="PMD/Sector"; | |
f117e3aa | 1678 | |
4b6f3b17 | 1679 | TString volpath, symname; |
1680 | ||
1681 | for(Int_t cnt=1; cnt<=4; cnt++){ | |
1682 | volpath = vpsector; | |
1683 | volpath += cnt; | |
1684 | volpath += vpappend; | |
1685 | symname = snsector; | |
1686 | symname += cnt; | |
3cf8979e | 1687 | if(!gGeoManager->SetAlignableEntry(symname.Data(),volpath.Data())) |
1688 | { | |
1689 | AliFatal("Unable to set alignable entry!"); | |
1690 | } | |
4b6f3b17 | 1691 | } |
1692 | } | |
1693 | // ------------------------------------------------------------------ |