]>
Commit | Line | Data |
---|---|---|
68ca986e | 1 | /************************************************************************** |
2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * | |
3 | * * | |
4 | * Author: The ALICE Off-line Project. * | |
5 | * Contributors are mentioned in the code where appropriate. * | |
6 | * * | |
7 | * Permission to use, copy, modify and distribute this software and its * | |
8 | * documentation strictly for non-commercial purposes is hereby granted * | |
9 | * without fee, provided that the above copyright notice appears in all * | |
10 | * copies and that both the copyright notice and this permission notice * | |
11 | * appear in the supporting documentation. The authors make no claims * | |
12 | * about the suitability of this software for any purpose. It is * | |
13 | * provided "as is" without express or implied warranty. * | |
14 | **************************************************************************/ | |
15 | ||
16 | /* | |
17 | $Log$ | |
9e1a0ddb | 18 | Revision 1.23 2001/05/14 09:51:50 coppedis |
19 | Change in AddHit suggested by J. Chudoba | |
20 | ||
de28527d | 21 | Revision 1.22 2001/05/05 13:33:19 coppedis |
22 | Changes in StepManager to speed simulation | |
23 | ||
d213f1fa | 24 | Revision 1.21 2001/05/02 11:54:34 enrico |
25 | Minor change | |
26 | ||
57c25752 | 27 | Revision 1.20 2001/05/02 10:33:11 coppedis |
28 | Modify tmaxfd in media definition | |
29 | ||
fbf7f757 | 30 | Revision 1.19 2001/04/27 08:35:01 coppedis |
31 | Remove some lines for proton acceptance studies | |
32 | ||
4f9ca16e | 33 | Revision 1.18 2001/04/20 10:08:45 coppedis |
34 | Preliminary version of optics 6.2 - Insertion of TDI | |
35 | ||
a2216698 | 36 | Revision 1.17 2001/03/16 16:18:10 coppedis |
37 | Correction for superposition of ZDC volumes with MUON arm one | |
38 | ||
0014adbc | 39 | Revision 1.16 2001/03/15 16:12:04 coppedis |
40 | Code review | |
41 | ||
5a881c97 | 42 | Revision 1.15 2001/03/12 17:47:56 hristov |
43 | Changes needed on Sun with CC 5.0 | |
44 | ||
5cf7bbad | 45 | Revision 1.14 2001/02/23 16:48:28 coppedis |
46 | Correct bug in ZEM hit definition | |
47 | ||
0c9b76ab | 48 | Revision 1.13 2001/02/07 18:07:41 coppedis |
49 | Modif for splitting | |
50 | ||
7d285fe3 | 51 | Revision 1.12 2001/01/26 19:56:27 hristov |
52 | Major upgrade of AliRoot code | |
53 | ||
2ab0c725 | 54 | Revision 1.11 2001/01/16 07:43:33 hristov |
55 | Initialisation of ZDC hits | |
56 | ||
de6bc247 | 57 | Revision 1.10 2000/12/14 15:20:02 coppedis |
58 | Hits2Digits method for digitization | |
59 | ||
cc9c0243 | 60 | Revision 1.9 2000/12/13 10:33:49 coppedis |
61 | Prints only if fDebug==1 | |
62 | ||
9d7316ac | 63 | Revision 1.8 2000/12/12 14:10:02 coppedis |
64 | Correction suggested by M. Masera | |
65 | ||
bdee0299 | 66 | Revision 1.7 2000/11/30 17:23:47 coppedis |
67 | Remove first corrector dipole and introduce digitization | |
68 | ||
5ce39387 | 69 | Revision 1.6 2000/11/22 11:33:10 coppedis |
70 | Major code revision | |
71 | ||
866ab5a2 | 72 | Revision 1.5 2000/10/02 21:28:20 fca |
73 | Removal of useless dependecies via forward declarations | |
74 | ||
75 | Revision 1.3.2.1 2000/08/24 09:25:47 hristov | |
76 | Patch by P.Hristov: Bug in ZDC geometry corrected by E.Scomparin | |
77 | ||
94de3818 | 78 | Revision 1.4 2000/08/24 09:23:59 hristov |
79 | Bug in ZDC geometry corrected by E.Scomparin | |
80 | ||
0500bdfc | 81 | Revision 1.3 2000/07/12 06:59:16 fca |
82 | Fixing dimension of hits array | |
83 | ||
366ff5c2 | 84 | Revision 1.2 2000/07/11 11:12:34 fca |
85 | Some syntax corrections for non standard HP aCC | |
86 | ||
c0ceba4c | 87 | Revision 1.1 2000/07/10 13:58:01 fca |
5a881c97 | 88 | New version of ZDC from E.Scomparin & C.Oppedisano |
c0ceba4c | 89 | |
68ca986e | 90 | Revision 1.7 2000/01/19 17:17:40 fca |
91 | ||
92 | Revision 1.6 1999/09/29 09:24:35 fca | |
93 | Introduction of the Copyright and cvs Log | |
94 | ||
95 | */ | |
96 | ||
97 | /////////////////////////////////////////////////////////////////////////////// | |
98 | // // | |
99 | // Zero Degree Calorimeter // | |
866ab5a2 | 100 | // This class contains the basic functions for the ZDC // |
101 | // Functions specific to one particular geometry are // | |
68ca986e | 102 | // contained in the derived classes // |
103 | // // | |
104 | /////////////////////////////////////////////////////////////////////////////// | |
105 | ||
cc9c0243 | 106 | // --- Standard libraries |
107 | #include "stdio.h" | |
108 | ||
5ce39387 | 109 | // --- ROOT system |
68ca986e | 110 | #include <TBRIK.h> |
111 | #include <TNode.h> | |
112 | #include <TMath.h> | |
5ce39387 | 113 | #include <TRandom.h> |
866ab5a2 | 114 | #include <TSystem.h> |
5ce39387 | 115 | #include <TTree.h> |
68ca986e | 116 | |
5ce39387 | 117 | |
118 | // --- AliRoot classes | |
68ca986e | 119 | #include "AliZDCv1.h" |
5ce39387 | 120 | #include "AliZDCHit.h" |
121 | #include "AliZDCDigit.h" | |
68ca986e | 122 | #include "AliRun.h" |
5ce39387 | 123 | #include "AliDetector.h" |
94de3818 | 124 | #include "AliMagF.h" |
68ca986e | 125 | #include "AliMC.h" |
126 | #include "AliCallf77.h" | |
127 | #include "AliConst.h" | |
128 | #include "AliPDG.h" | |
5ce39387 | 129 | #include "TLorentzVector.h" |
68ca986e | 130 | |
131 | ||
132 | ClassImp(AliZDCv1) | |
133 | ||
134 | ||
135 | /////////////////////////////////////////////////////////////////////////////// | |
136 | // // | |
137 | // Zero Degree Calorimeter version 1 // | |
138 | // // | |
139 | /////////////////////////////////////////////////////////////////////////////// | |
140 | ||
141 | //_____________________________________________________________________________ | |
142 | AliZDCv1::AliZDCv1() : AliZDC() | |
143 | { | |
144 | // | |
145 | // Default constructor for Zero Degree Calorimeter | |
146 | // | |
5ce39387 | 147 | |
866ab5a2 | 148 | fMedSensF1 = 0; |
149 | fMedSensF2 = 0; | |
150 | fMedSensZN = 0; | |
151 | fMedSensZP = 0; | |
866ab5a2 | 152 | fMedSensZEM = 0; |
5a881c97 | 153 | fMedSensGR = 0; |
de28527d | 154 | // fMedSensPI = 0; |
155 | // fMedSensTDI = 0; | |
68ca986e | 156 | } |
157 | ||
158 | //_____________________________________________________________________________ | |
159 | AliZDCv1::AliZDCv1(const char *name, const char *title) | |
160 | : AliZDC(name,title) | |
161 | { | |
162 | // | |
163 | // Standard constructor for Zero Degree Calorimeter | |
164 | // | |
a2216698 | 165 | // |
166 | // Check that DIPO, ABSO, DIPO and SHIL is there (otherwise tracking is wrong!!!) | |
167 | ||
168 | AliModule* PIPE=gAlice->GetModule("PIPE"); | |
169 | AliModule* ABSO=gAlice->GetModule("ABSO"); | |
170 | AliModule* DIPO=gAlice->GetModule("DIPO"); | |
171 | AliModule* SHIL=gAlice->GetModule("SHIL"); | |
172 | if((!PIPE) || (!ABSO) || (!DIPO) || (!SHIL)) { | |
173 | Error("Constructor","ZDC needs PIPE, ABSO, DIPO and SHIL!!!\n"); | |
174 | exit(1); | |
175 | } | |
5ce39387 | 176 | |
866ab5a2 | 177 | fMedSensF1 = 0; |
178 | fMedSensF2 = 0; | |
179 | fMedSensZN = 0; | |
180 | fMedSensZP = 0; | |
866ab5a2 | 181 | fMedSensZEM = 0; |
5a881c97 | 182 | fMedSensGR = 0; |
de28527d | 183 | // fMedSensPI = 0; |
184 | // fMedSensTDI = 0; | |
5a881c97 | 185 | |
186 | ||
187 | // Parameters for light tables | |
188 | fNalfan = 90; // Number of Alfa (neutrons) | |
189 | fNalfap = 90; // Number of Alfa (protons) | |
190 | fNben = 18; // Number of beta (neutrons) | |
191 | fNbep = 28; // Number of beta (protons) | |
192 | Int_t ip,jp,kp; | |
193 | for(ip=0; ip<4; ip++){ | |
194 | for(kp=0; kp<fNalfap; kp++){ | |
195 | for(jp=0; jp<fNbep; jp++){ | |
196 | fTablep[ip][kp][jp] = 0; | |
197 | } | |
198 | } | |
199 | } | |
200 | Int_t in,jn,kn; | |
201 | for(in=0; in<4; in++){ | |
202 | for(kn=0; kn<fNalfan; kn++){ | |
203 | for(jn=0; jn<fNben; jn++){ | |
204 | fTablen[in][kn][jn] = 0; | |
205 | } | |
206 | } | |
207 | } | |
208 | ||
209 | // Parameters for hadronic calorimeters geometry | |
210 | fDimZP[0] = 11.2; | |
211 | fDimZP[1] = 6.; | |
212 | fDimZP[2] = 75.; | |
213 | fPosZN[0] = 0.; | |
a2216698 | 214 | fPosZN[1] = -1.2; |
5a881c97 | 215 | fPosZN[2] = 11650.; |
a2216698 | 216 | fPosZP[0] = -24.; |
5a881c97 | 217 | fPosZP[1] = 0.; |
218 | fPosZP[2] = 11600.; | |
219 | fFibZN[0] = 0.; | |
220 | fFibZN[1] = 0.01825; | |
221 | fFibZN[2] = 50.; | |
222 | fFibZP[0] = 0.; | |
223 | fFibZP[1] = 0.0275; | |
224 | fFibZP[2] = 75.; | |
225 | ||
226 | // Parameters for EM calorimeter geometry | |
227 | fPosZEM[0] = 0.; | |
228 | fPosZEM[1] = 5.8; | |
229 | fPosZEM[2] = 11600.; | |
230 | ||
231 | ||
232 | fDigits = new TClonesArray("AliZDCDigit",1000); | |
68ca986e | 233 | } |
234 | ||
235 | //_____________________________________________________________________________ | |
236 | void AliZDCv1::CreateGeometry() | |
237 | { | |
238 | // | |
239 | // Create the geometry for the Zero Degree Calorimeter version 1 | |
240 | //* Initialize COMMON block ZDC_CGEOM | |
241 | //* | |
242 | ||
243 | CreateBeamLine(); | |
244 | CreateZDC(); | |
245 | } | |
246 | ||
247 | //_____________________________________________________________________________ | |
248 | void AliZDCv1::CreateBeamLine() | |
249 | { | |
250 | ||
a2216698 | 251 | Float_t zq, zd1, zd2; |
252 | Float_t conpar[9], tubpar[3], tubspar[5], boxpar[3]; | |
68ca986e | 253 | Int_t im1, im2; |
68ca986e | 254 | |
255 | Int_t *idtmed = fIdtmed->GetArray(); | |
256 | ||
a2216698 | 257 | // -- Mother of the ZDCs (Vacuum PCON) |
68ca986e | 258 | |
259 | conpar[0] = 0.; | |
260 | conpar[1] = 360.; | |
261 | conpar[2] = 2.; | |
0014adbc | 262 | conpar[3] = 2000.; |
68ca986e | 263 | conpar[4] = 0.; |
264 | conpar[5] = 55.; | |
265 | conpar[6] = 13060.; | |
266 | conpar[7] = 0.; | |
267 | conpar[8] = 55.; | |
a2216698 | 268 | gMC->Gsvolu("ZDC ", "PCON", idtmed[11], conpar, 9); |
68ca986e | 269 | gMC->Gspos("ZDC ", 1, "ALIC", 0., 0., 0., 0, "ONLY"); |
270 | ||
271 | // -- FIRST SECTION OF THE BEAM PIPE (from compensator dipole to | |
a2216698 | 272 | // the beginning of D1) |
68ca986e | 273 | |
0014adbc | 274 | zd1 = 2000.; |
68ca986e | 275 | |
276 | tubpar[0] = 6.3/2.; | |
277 | tubpar[1] = 6.7/2.; | |
0014adbc | 278 | tubpar[2] = 3838.3/2.; |
a2216698 | 279 | gMC->Gsvolu("QT01", "TUBE", idtmed[7], tubpar, 3); |
280 | gMC->Gspos("QT01", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
281 | ||
282 | //-- SECOND SECTION OF THE BEAM PIPE (from the end of D1 to the | |
283 | // beginning of D2) | |
284 | ||
285 | //-- FROM MAGNETIC BEGINNING OF D1 TO MAGNETIC END OF D1 + 13.5 cm | |
286 | //-- Cylindrical pipe (r = 3.47) + conical flare | |
287 | ||
288 | // -> Beginning of D1 | |
289 | zd1 += 2.*tubpar[2]; | |
290 | ||
291 | tubpar[0] = 3.47; | |
292 | tubpar[1] = 3.47+0.2; | |
293 | tubpar[2] = 958.5/2.; | |
294 | gMC->Gsvolu("QT02", "TUBE", idtmed[7], tubpar, 3); | |
295 | gMC->Gspos("QT02", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
296 | ||
297 | zd1 += 2.*tubpar[2]; | |
68ca986e | 298 | |
299 | conpar[0] = 25./2.; | |
300 | conpar[1] = 6.44/2.; | |
301 | conpar[2] = 6.84/2.; | |
302 | conpar[3] = 10./2.; | |
303 | conpar[4] = 10.4/2.; | |
a2216698 | 304 | gMC->Gsvolu("QC01", "CONE", idtmed[7], conpar, 5); |
305 | gMC->Gspos("QC01", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY"); | |
68ca986e | 306 | |
307 | zd1 += 2.*conpar[0]; | |
308 | ||
309 | tubpar[0] = 10./2.; | |
310 | tubpar[1] = 10.4/2.; | |
311 | tubpar[2] = 50./2.; | |
a2216698 | 312 | gMC->Gsvolu("QT03", "TUBE", idtmed[7], tubpar, 3); |
313 | gMC->Gspos("QT03", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
68ca986e | 314 | |
5a881c97 | 315 | zd1 += tubpar[2]*2.; |
68ca986e | 316 | |
317 | tubpar[0] = 10./2.; | |
318 | tubpar[1] = 10.4/2.; | |
319 | tubpar[2] = 10./2.; | |
a2216698 | 320 | gMC->Gsvolu("QT04", "TUBE", idtmed[7], tubpar, 3); |
321 | gMC->Gspos("QT04", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
68ca986e | 322 | |
323 | zd1 += tubpar[2] * 2.; | |
324 | ||
325 | tubpar[0] = 10./2.; | |
326 | tubpar[1] = 10.4/2.; | |
327 | tubpar[2] = 3.16/2.; | |
a2216698 | 328 | gMC->Gsvolu("QT05", "TUBE", idtmed[7], tubpar, 3); |
329 | gMC->Gspos("QT05", 1, "ZDC ", 0., 0., tubpar[0] + zd1, 0, "ONLY"); | |
68ca986e | 330 | |
331 | zd1 += tubpar[2] * 2.; | |
332 | ||
333 | tubpar[0] = 10.0/2.; | |
334 | tubpar[1] = 10.4/2; | |
335 | tubpar[2] = 190./2.; | |
a2216698 | 336 | gMC->Gsvolu("QT06", "TUBE", idtmed[7], tubpar, 3); |
337 | gMC->Gspos("QT06", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
68ca986e | 338 | |
339 | zd1 += tubpar[2] * 2.; | |
340 | ||
341 | conpar[0] = 30./2.; | |
342 | conpar[1] = 10./2.; | |
343 | conpar[2] = 10.4/2.; | |
344 | conpar[3] = 20.6/2.; | |
345 | conpar[4] = 21./2.; | |
a2216698 | 346 | gMC->Gsvolu("QC02", "CONE", idtmed[7], conpar, 5); |
347 | gMC->Gspos("QC02", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY"); | |
68ca986e | 348 | |
349 | zd1 += conpar[0] * 2.; | |
350 | ||
351 | tubpar[0] = 20.6/2.; | |
352 | tubpar[1] = 21./2.; | |
353 | tubpar[2] = 450./2.; | |
a2216698 | 354 | gMC->Gsvolu("QT07", "TUBE", idtmed[7], tubpar, 3); |
355 | gMC->Gspos("QT07", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
68ca986e | 356 | |
357 | zd1 += tubpar[2] * 2.; | |
358 | ||
359 | conpar[0] = 13.6/2.; | |
360 | conpar[1] = 20.6/2.; | |
361 | conpar[2] = 21./2.; | |
362 | conpar[3] = 25.4/2.; | |
363 | conpar[4] = 25.8/2.; | |
a2216698 | 364 | gMC->Gsvolu("QC03", "CONE", idtmed[7], conpar, 5); |
365 | gMC->Gspos("QC03", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY"); | |
68ca986e | 366 | |
367 | zd1 += conpar[0] * 2.; | |
368 | ||
369 | tubpar[0] = 25.4/2.; | |
370 | tubpar[1] = 25.8/2.; | |
371 | tubpar[2] = 205.8/2.; | |
a2216698 | 372 | gMC->Gsvolu("QT08", "TUBE", idtmed[7], tubpar, 3); |
373 | gMC->Gspos("QT08", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
68ca986e | 374 | |
375 | zd1 += tubpar[2] * 2.; | |
376 | ||
377 | tubpar[0] = 50./2.; | |
378 | tubpar[1] = 50.4/2.; | |
a2216698 | 379 | // QT09 is 10 cm longer to accomodate TDI |
380 | tubpar[2] = 515.4/2.; | |
381 | gMC->Gsvolu("QT09", "TUBE", idtmed[7], tubpar, 3); | |
382 | gMC->Gspos("QT09", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
383 | ||
384 | // --- Insert TDI (inside ZDC volume) | |
385 | ||
386 | boxpar[0] = 5.6; | |
387 | boxpar[1] = 5.6; | |
388 | boxpar[2] = 400./2.; | |
389 | gMC->Gsvolu("QTD1", "BOX ", idtmed[7], boxpar, 3); | |
390 | gMC->Gspos("QTD1", 1, "ZDC ", 0., 10.6, tubpar[2] + zd1 + 56.3, 0, "ONLY"); | |
391 | gMC->Gspos("QTD1", 2, "ZDC ", 0., -10.6, tubpar[2] + zd1 + 56.3, 0, "ONLY"); | |
392 | ||
393 | boxpar[0] = 0.2/2.; | |
394 | boxpar[1] = 5.6; | |
395 | boxpar[2] = 400./2.; | |
396 | gMC->Gsvolu("QTD2", "BOX ", idtmed[6], boxpar, 3); | |
397 | gMC->Gspos("QTD2", 1, "ZDC ", 5.6+boxpar[0], 0., tubpar[2] + zd1 + 56.3, 0, "ONLY"); | |
398 | ||
399 | tubspar[0] = 6.2; | |
400 | tubspar[1] = 6.4; | |
401 | tubspar[2] = 400./2.; | |
402 | tubspar[3] = 180.-62.5; | |
403 | tubspar[4] = 180.+62.5; | |
404 | gMC->Gsvolu("QTD3", "TUBS", idtmed[6], tubspar, 5); | |
405 | gMC->Gspos("QTD3", 1, "ZDC ", -3., 0., tubpar[2] + zd1 + 56.3, 0, "ONLY"); | |
406 | ||
68ca986e | 407 | zd1 += tubpar[2] * 2.; |
408 | ||
409 | tubpar[0] = 50./2.; | |
410 | tubpar[1] = 50.4/2.; | |
a2216698 | 411 | // QT10 is 10 cm shorter |
412 | tubpar[2] = 690./2.; | |
413 | gMC->Gsvolu("QT10", "TUBE", idtmed[7], tubpar, 3); | |
414 | gMC->Gspos("QT10", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
68ca986e | 415 | |
416 | zd1 += tubpar[2] * 2.; | |
417 | ||
418 | tubpar[0] = 50./2.; | |
419 | tubpar[1] = 50.4/2.; | |
420 | tubpar[2] = 778.5/2.; | |
a2216698 | 421 | gMC->Gsvolu("QT11", "TUBE", idtmed[7], tubpar, 3); |
422 | gMC->Gspos("QT11", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
68ca986e | 423 | |
424 | zd1 += tubpar[2] * 2.; | |
425 | ||
426 | conpar[0] = 14.18/2.; | |
427 | conpar[1] = 50./2.; | |
428 | conpar[2] = 50.4/2.; | |
429 | conpar[3] = 55./2.; | |
430 | conpar[4] = 55.4/2.; | |
a2216698 | 431 | gMC->Gsvolu("QC04", "CONE", idtmed[7], conpar, 5); |
432 | gMC->Gspos("QC04", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY"); | |
68ca986e | 433 | |
434 | zd1 += conpar[0] * 2.; | |
435 | ||
436 | tubpar[0] = 55./2.; | |
437 | tubpar[1] = 55.4/2.; | |
438 | tubpar[2] = 730./2.; | |
a2216698 | 439 | gMC->Gsvolu("QT12", "TUBE", idtmed[7], tubpar, 3); |
440 | gMC->Gspos("QT12", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
68ca986e | 441 | |
442 | zd1 += tubpar[2] * 2.; | |
443 | ||
444 | conpar[0] = 36.86/2.; | |
445 | conpar[1] = 55./2.; | |
446 | conpar[2] = 55.4/2.; | |
447 | conpar[3] = 68./2.; | |
448 | conpar[4] = 68.4/2.; | |
a2216698 | 449 | gMC->Gsvolu("QC05", "CONE", idtmed[7], conpar, 5); |
450 | gMC->Gspos("QC05", 1, "ZDC ", 0., 0., conpar[0] + zd1, 0, "ONLY"); | |
68ca986e | 451 | |
452 | zd1 += conpar[0] * 2.; | |
453 | ||
454 | tubpar[0] = 68./2.; | |
455 | tubpar[1] = 68.4/2.; | |
456 | tubpar[2] = 927.3/2.; | |
a2216698 | 457 | gMC->Gsvolu("QT13", "TUBE", idtmed[7], tubpar, 3); |
458 | gMC->Gspos("QT13", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
68ca986e | 459 | |
460 | zd1 += tubpar[2] * 2.; | |
461 | ||
462 | tubpar[0] = 0./2.; | |
463 | tubpar[1] = 68.4/2.; | |
464 | tubpar[2] = 0.2/2.; | |
a2216698 | 465 | gMC->Gsvolu("QT14", "TUBE", idtmed[8], tubpar, 3); |
466 | gMC->Gspos("QT14", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
68ca986e | 467 | |
468 | zd1 += tubpar[2] * 2.; | |
469 | ||
470 | tubpar[0] = 0./2.; | |
a2216698 | 471 | tubpar[1] = 6.4/2.; |
68ca986e | 472 | tubpar[2] = 0.2/2.; |
a2216698 | 473 | gMC->Gsvolu("QT15", "TUBE", idtmed[11], tubpar, 3); |
68ca986e | 474 | |
a2216698 | 475 | //-- Position QT15 inside QT14 |
476 | gMC->Gspos("QT15", 1, "QT14", -7.7, 0., 0., 0, "ONLY"); | |
68ca986e | 477 | |
478 | tubpar[0] = 0./2.; | |
a2216698 | 479 | tubpar[1] = 6.4/2.; |
68ca986e | 480 | tubpar[2] = 0.2/2.; |
a2216698 | 481 | gMC->Gsvolu("QT16", "TUBE", idtmed[11], tubpar, 3); |
482 | ||
483 | //-- Position QT16 inside QT14 | |
484 | gMC->Gspos("QT16", 1, "QT14", 7.7, 0., 0., 0, "ONLY"); | |
68ca986e | 485 | |
68ca986e | 486 | |
487 | //-- BEAM PIPE BETWEEN END OF CONICAL PIPE AND BEGINNING OF D2 | |
488 | ||
a2216698 | 489 | tubpar[0] = 6.4/2.; |
490 | tubpar[1] = 6.8/2.; | |
491 | tubpar[2] = 680.8/2.; | |
492 | gMC->Gsvolu("QT17", "TUBE", idtmed[7], tubpar, 3); | |
68ca986e | 493 | |
a2216698 | 494 | tubpar[0] = 6.4/2.; |
495 | tubpar[1] = 6.8/2.; | |
496 | tubpar[2] = 680.8/2.; | |
497 | gMC->Gsvolu("QT18", "TUBE", idtmed[7], tubpar, 3); | |
68ca986e | 498 | |
499 | // -- ROTATE PIPES | |
500 | ||
a2216698 | 501 | Float_t angle = 0.143*kDegrad; |
68ca986e | 502 | |
a2216698 | 503 | AliMatrix(im1, 90.-0.143, 0., 90., 90., 0.143, 180.); |
504 | gMC->Gspos("QT17", 1, "ZDC ", TMath::Sin(angle) * 680.8/ 2. - 9.4, | |
505 | 0., tubpar[2] + zd1, im1, "ONLY"); | |
506 | ||
507 | AliMatrix(im2, 90.+0.143, 0., 90., 90., 0.143, 0.); | |
508 | gMC->Gspos("QT18", 1, "ZDC ", 9.7 - TMath::Sin(angle) * 680.8 / 2., | |
509 | 0., tubpar[2] + zd1, im2, "ONLY"); | |
510 | ||
511 | ||
512 | // -- END OF BEAM PIPE VOLUME DEFINITION. | |
513 | // ---------------------------------------------------------------- | |
514 | ||
515 | // -- MAGNET DEFINITION -> LHC OPTICS 6.2 (preliminary version) | |
68ca986e | 516 | |
0014adbc | 517 | // ---------------------------------------------------------------- |
518 | // Replaced by the muon dipole | |
519 | // ---------------------------------------------------------------- | |
68ca986e | 520 | // -- COMPENSATOR DIPOLE (MBXW) |
521 | // GAP (VACUUM WITH MAGNETIC FIELD) | |
522 | ||
5ce39387 | 523 | // tubpar[0] = 0.; |
524 | // tubpar[1] = 4.5; | |
525 | // tubpar[2] = 340./2.; | |
526 | // gMC->Gsvolu("MBXW", "TUBE", idtmed[11], tubpar, 3); | |
527 | // gMC->Gspos("MBXW", 1, "ZDC ", 0., 0., tubpar[2] + 805., 0, "ONLY"); | |
68ca986e | 528 | |
529 | // -- YOKE (IRON WITHOUT MAGNETIC FIELD) | |
530 | ||
5ce39387 | 531 | // tubpar[0] = 4.5; |
532 | // tubpar[1] = 55.; | |
533 | // tubpar[2] = 340./2.; | |
a2216698 | 534 | // gMC->Gsvolu("YMBX", "TUBE", idtmed[7], tubpar, 3); |
5ce39387 | 535 | // gMC->Gspos("YMBX", 1, "ZDC ", 0., 0., tubpar[2] + 805., 0, "ONLY"); |
68ca986e | 536 | |
0014adbc | 537 | // ---------------------------------------------------------------- |
a2216698 | 538 | // Replaced by the second dipole |
0014adbc | 539 | // ---------------------------------------------------------------- |
68ca986e | 540 | // -- COMPENSATOR DIPOLE (MCBWA) |
541 | // GAP (VACUUM WITH MAGNETIC FIELD) | |
542 | ||
0014adbc | 543 | // tubpar[0] = 0.; |
544 | // tubpar[1] = 4.5; | |
545 | // tubpar[2] = 170./2.; | |
546 | // gMC->Gsvolu("MCBW", "TUBE", idtmed[11], tubpar, 3); | |
547 | // gMC->Gspos("MCBW", 1, "ZDC ", 0., 0., tubpar[2] + 1921.6, 0, "ONLY"); | |
68ca986e | 548 | |
549 | // -- YOKE (IRON WITHOUT MAGNETIC FIELD) | |
550 | ||
0014adbc | 551 | // tubpar[0] = 4.5; |
552 | // tubpar[1] = 55.; | |
553 | // tubpar[2] = 170./2.; | |
a2216698 | 554 | // gMC->Gsvolu("YMCB", "TUBE", idtmed[7], tubpar, 3); |
0014adbc | 555 | // gMC->Gspos("YMCB", 1, "ZDC ", 0., 0., tubpar[2] + 1921.6, 0, "ONLY"); |
68ca986e | 556 | |
557 | // -- INNER TRIPLET | |
558 | ||
a2216698 | 559 | zq = 2296.5; |
68ca986e | 560 | |
561 | // -- DEFINE MQXL AND MQX QUADRUPOLE ELEMENT | |
562 | ||
563 | // MQXL | |
564 | // -- GAP (VACUUM WITH MAGNETIC FIELD) | |
565 | ||
566 | tubpar[0] = 0.; | |
567 | tubpar[1] = 3.5; | |
a2216698 | 568 | tubpar[2] = 637./2.; |
68ca986e | 569 | gMC->Gsvolu("MQXL", "TUBE", idtmed[11], tubpar, 3); |
570 | ||
571 | // -- YOKE | |
572 | ||
573 | tubpar[0] = 3.5; | |
574 | tubpar[1] = 22.; | |
a2216698 | 575 | tubpar[2] = 637./2.; |
576 | gMC->Gsvolu("YMQL", "TUBE", idtmed[7], tubpar, 3); | |
68ca986e | 577 | |
578 | gMC->Gspos("MQXL", 1, "ZDC ", 0., 0., tubpar[2] + zq, 0, "ONLY"); | |
579 | gMC->Gspos("YMQL", 1, "ZDC ", 0., 0., tubpar[2] + zq, 0, "ONLY"); | |
580 | ||
581 | gMC->Gspos("MQXL", 2, "ZDC ", 0., 0., tubpar[2] + zq + 2430., 0, "ONLY"); | |
582 | gMC->Gspos("YMQL", 2, "ZDC ", 0., 0., tubpar[2] + zq + 2430., 0, "ONLY"); | |
583 | ||
584 | // -- MQX | |
585 | // -- GAP (VACUUM WITH MAGNETIC FIELD) | |
586 | ||
587 | tubpar[0] = 0.; | |
588 | tubpar[1] = 3.5; | |
589 | tubpar[2] = 550./2.; | |
590 | gMC->Gsvolu("MQX ", "TUBE", idtmed[11], tubpar, 3); | |
591 | ||
592 | // -- YOKE | |
593 | ||
594 | tubpar[0] = 3.5; | |
595 | tubpar[1] = 22.; | |
596 | tubpar[2] = 550./2.; | |
a2216698 | 597 | gMC->Gsvolu("YMQ ", "TUBE", idtmed[7], tubpar, 3); |
68ca986e | 598 | |
a2216698 | 599 | gMC->Gspos("MQX ", 1, "ZDC ", 0., 0., tubpar[2] + zq + 883.5, 0, "ONLY"); |
600 | gMC->Gspos("YMQ ", 1, "ZDC ", 0., 0., tubpar[2] + zq + 883.5, 0, "ONLY"); | |
68ca986e | 601 | |
a2216698 | 602 | gMC->Gspos("MQX ", 2, "ZDC ", 0., 0., tubpar[2] + zq + 1533.5, 0, "ONLY"); |
603 | gMC->Gspos("YMQ ", 2, "ZDC ", 0., 0., tubpar[2] + zq + 1533.5, 0, "ONLY"); | |
68ca986e | 604 | |
605 | // -- SEPARATOR DIPOLE D1 | |
606 | ||
607 | zd1 = 5838.3; | |
608 | ||
609 | // -- GAP (VACUUM WITH MAGNETIC FIELD) | |
610 | ||
611 | tubpar[0] = 0.; | |
a2216698 | 612 | tubpar[1] = 6.94/2.; |
68ca986e | 613 | tubpar[2] = 945./2.; |
a2216698 | 614 | gMC->Gsvolu("MD1 ", "TUBE", idtmed[11], tubpar, 3); |
615 | ||
616 | // -- Insert horizontal Cu plates inside D1 | |
617 | // -- (to simulate the vacuum chamber) | |
68ca986e | 618 | |
a2216698 | 619 | boxpar[0] = TMath::Sqrt(tubpar[1]*tubpar[1]-(2.98+0.2)*(2.98+0.2)); |
620 | boxpar[1] = 0.2/2.; | |
621 | boxpar[2] =945./2.; | |
622 | gMC->Gsvolu("MD1V", "BOX ", idtmed[6], boxpar, 3); | |
623 | gMC->Gspos("MD1V", 1, "MD1 ", 0., 2.98+boxpar[1], 0., 0, "ONLY"); | |
624 | gMC->Gspos("MD1V", 2, "MD1 ", 0., -2.98-boxpar[1], 0., 0, "ONLY"); | |
625 | ||
68ca986e | 626 | // -- YOKE |
627 | ||
628 | tubpar[0] = 0.; | |
629 | tubpar[1] = 110./2; | |
630 | tubpar[2] = 945./2.; | |
a2216698 | 631 | gMC->Gsvolu("YD1 ", "TUBE", idtmed[7], tubpar, 3); |
68ca986e | 632 | |
633 | gMC->Gspos("YD1 ", 1, "ZDC ", 0., 0., tubpar[2] + zd1, 0, "ONLY"); | |
a2216698 | 634 | gMC->Gspos("MD1 ", 1, "YD1 ", 0., 0., 0., 0, "ONLY"); |
68ca986e | 635 | |
636 | // -- DIPOLE D2 | |
637 | ||
638 | zd2 = 12147.6; | |
639 | ||
640 | // -- GAP (VACUUM WITH MAGNETIC FIELD) | |
641 | ||
642 | tubpar[0] = 0.; | |
643 | tubpar[1] = 7.5/2.; | |
644 | tubpar[2] = 945./2.; | |
a2216698 | 645 | gMC->Gsvolu("MD2 ", "TUBE", idtmed[11], tubpar, 3); |
68ca986e | 646 | |
647 | // -- YOKE | |
648 | ||
649 | tubpar[0] = 0.; | |
650 | tubpar[1] = 55.; | |
651 | tubpar[2] = 945./2.; | |
a2216698 | 652 | gMC->Gsvolu("YD2 ", "TUBE", idtmed[7], tubpar, 3); |
68ca986e | 653 | |
654 | gMC->Gspos("YD2 ", 1, "ZDC ", 0., 0., tubpar[2] + zd2, 0, "ONLY"); | |
655 | ||
a2216698 | 656 | gMC->Gspos("MD2 ", 1, "YD2 ", -9.4, 0., 0., 0, "ONLY"); |
657 | gMC->Gspos("MD2 ", 2, "YD2 ", 9.4, 0., 0., 0, "ONLY"); | |
68ca986e | 658 | |
659 | // -- END OF MAGNET DEFINITION | |
660 | } | |
661 | ||
662 | //_____________________________________________________________________________ | |
663 | void AliZDCv1::CreateZDC() | |
664 | { | |
665 | ||
866ab5a2 | 666 | Float_t DimPb[6], DimVoid[6]; |
5a881c97 | 667 | |
668 | Int_t *idtmed = fIdtmed->GetArray(); | |
669 | ||
670 | // Parameters for hadronic calorimeters geometry | |
671 | // NB -> parameters used ONLY in CreateZDC() | |
672 | Float_t fDimZN[3] = {3.52, 3.52, 50.}; // Dimensions of neutron detector | |
673 | Float_t fGrvZN[3] = {0.03, 0.03, 50.}; // Grooves for neutron detector | |
674 | Float_t fGrvZP[3] = {0.04, 0.04, 75.}; // Grooves for proton detector | |
675 | Int_t fDivZN[3] = {11, 11, 0}; // Division for neutron detector | |
676 | Int_t fDivZP[3] = {7, 15, 0}; // Division for proton detector | |
677 | Int_t fTowZN[2] = {2, 2}; // Tower for neutron detector | |
678 | Int_t fTowZP[2] = {4, 1}; // Tower for proton detector | |
679 | ||
680 | // Parameters for EM calorimeter geometry | |
681 | // NB -> parameters used ONLY in CreateZDC() | |
682 | Float_t fDimZEMPb = 0.15*(TMath::Sqrt(2.)); // z-dimension of the Pb slice | |
683 | Float_t fDimZEMAir = 0.001; // scotch | |
684 | Float_t fFibRadZEM = 0.0315; // External fiber radius (including cladding) | |
685 | Int_t fDivZEM[3] = {92, 0, 20}; // Divisions for EM detector | |
686 | Float_t fDimZEM0 = 2*fDivZEM[2]*(fDimZEMPb+fDimZEMAir+fFibRadZEM*(TMath::Sqrt(2.))); | |
687 | Float_t fDimZEM[6] = {fDimZEM0, 3.5, 3.5, 45., 0., 0.}; // Dimensions of EM detector | |
688 | Float_t fFibZEM2 = fDimZEM[2]/TMath::Sin(fDimZEM[3]*kDegrad)-fFibRadZEM; | |
689 | Float_t fFibZEM[3] = {0., 0.0275, fFibZEM2}; // Fibers for EM calorimeter | |
866ab5a2 | 690 | |
68ca986e | 691 | |
692 | //-- Create calorimeters geometry | |
693 | ||
a2216698 | 694 | // ------------------------------------------------------------------------------- |
68ca986e | 695 | //--> Neutron calorimeter (ZN) |
696 | ||
697 | gMC->Gsvolu("ZNEU", "BOX ", idtmed[1], fDimZN, 3); // Passive material | |
698 | gMC->Gsvolu("ZNF1", "TUBE", idtmed[3], fFibZN, 3); // Active material | |
699 | gMC->Gsvolu("ZNF2", "TUBE", idtmed[4], fFibZN, 3); | |
700 | gMC->Gsvolu("ZNF3", "TUBE", idtmed[4], fFibZN, 3); | |
701 | gMC->Gsvolu("ZNF4", "TUBE", idtmed[3], fFibZN, 3); | |
702 | gMC->Gsvolu("ZNG1", "BOX ", idtmed[12], fGrvZN, 3); // Empty grooves | |
703 | gMC->Gsvolu("ZNG2", "BOX ", idtmed[12], fGrvZN, 3); | |
704 | gMC->Gsvolu("ZNG3", "BOX ", idtmed[12], fGrvZN, 3); | |
705 | gMC->Gsvolu("ZNG4", "BOX ", idtmed[12], fGrvZN, 3); | |
706 | ||
707 | // Divide ZNEU in towers (for hits purposes) | |
708 | ||
709 | gMC->Gsdvn("ZNTX", "ZNEU", fTowZN[0], 1); // x-tower | |
710 | gMC->Gsdvn("ZN1 ", "ZNTX", fTowZN[1], 2); // y-tower | |
711 | ||
712 | //-- Divide ZN1 in minitowers | |
713 | // fDivZN[0]= NUMBER OF FIBERS PER TOWER ALONG X-AXIS, | |
714 | // fDivZN[1]= NUMBER OF FIBERS PER TOWER ALONG Y-AXIS | |
715 | // (4 fibres per minitower) | |
716 | ||
717 | gMC->Gsdvn("ZNSL", "ZN1 ", fDivZN[1], 2); // Slices | |
718 | gMC->Gsdvn("ZNST", "ZNSL", fDivZN[0], 1); // Sticks | |
719 | ||
720 | // --- Position the empty grooves in the sticks (4 grooves per stick) | |
721 | Float_t dx = fDimZN[0] / fDivZN[0] / 4.; | |
722 | Float_t dy = fDimZN[1] / fDivZN[1] / 4.; | |
723 | ||
724 | gMC->Gspos("ZNG1", 1, "ZNST", 0.-dx, 0.+dy, 0., 0, "ONLY"); | |
725 | gMC->Gspos("ZNG2", 1, "ZNST", 0.+dx, 0.+dy, 0., 0, "ONLY"); | |
726 | gMC->Gspos("ZNG3", 1, "ZNST", 0.-dx, 0.-dy, 0., 0, "ONLY"); | |
727 | gMC->Gspos("ZNG4", 1, "ZNST", 0.+dx, 0.-dy, 0., 0, "ONLY"); | |
728 | ||
729 | // --- Position the fibers in the grooves | |
730 | gMC->Gspos("ZNF1", 1, "ZNG1", 0., 0., 0., 0, "ONLY"); | |
731 | gMC->Gspos("ZNF2", 1, "ZNG2", 0., 0., 0., 0, "ONLY"); | |
732 | gMC->Gspos("ZNF3", 1, "ZNG3", 0., 0., 0., 0, "ONLY"); | |
733 | gMC->Gspos("ZNF4", 1, "ZNG4", 0., 0., 0., 0, "ONLY"); | |
734 | ||
735 | // --- Position the neutron calorimeter in ZDC | |
736 | gMC->Gspos("ZNEU", 1, "ZDC ", fPosZN[0], fPosZN[1], fPosZN[2] + fDimZN[2], 0, "ONLY"); | |
737 | ||
866ab5a2 | 738 | |
a2216698 | 739 | // ------------------------------------------------------------------------------- |
866ab5a2 | 740 | //--> Proton calorimeter (ZP) |
68ca986e | 741 | |
742 | gMC->Gsvolu("ZPRO", "BOX ", idtmed[2], fDimZP, 3); // Passive material | |
743 | gMC->Gsvolu("ZPF1", "TUBE", idtmed[3], fFibZP, 3); // Active material | |
744 | gMC->Gsvolu("ZPF2", "TUBE", idtmed[4], fFibZP, 3); | |
745 | gMC->Gsvolu("ZPF3", "TUBE", idtmed[4], fFibZP, 3); | |
746 | gMC->Gsvolu("ZPF4", "TUBE", idtmed[3], fFibZP, 3); | |
747 | gMC->Gsvolu("ZPG1", "BOX ", idtmed[12], fGrvZP, 3); // Empty grooves | |
748 | gMC->Gsvolu("ZPG2", "BOX ", idtmed[12], fGrvZP, 3); | |
749 | gMC->Gsvolu("ZPG3", "BOX ", idtmed[12], fGrvZP, 3); | |
750 | gMC->Gsvolu("ZPG4", "BOX ", idtmed[12], fGrvZP, 3); | |
751 | ||
752 | //-- Divide ZPRO in towers(for hits purposes) | |
753 | ||
754 | gMC->Gsdvn("ZPTX", "ZPRO", fTowZP[0], 1); // x-tower | |
755 | gMC->Gsdvn("ZP1 ", "ZPTX", fTowZP[1], 2); // y-tower | |
756 | ||
757 | ||
758 | //-- Divide ZP1 in minitowers | |
759 | // fDivZP[0]= NUMBER OF FIBERS ALONG X-AXIS PER MINITOWER, | |
760 | // fDivZP[1]= NUMBER OF FIBERS ALONG Y-AXIS PER MINITOWER | |
761 | // (4 fiber per minitower) | |
762 | ||
763 | gMC->Gsdvn("ZPSL", "ZP1 ", fDivZP[1], 2); // Slices | |
764 | gMC->Gsdvn("ZPST", "ZPSL", fDivZP[0], 1); // Sticks | |
765 | ||
766 | // --- Position the empty grooves in the sticks (4 grooves per stick) | |
767 | dx = fDimZP[0] / fTowZP[0] / fDivZP[0] / 2.; | |
768 | dy = fDimZP[1] / fTowZP[1] / fDivZP[1] / 2.; | |
769 | ||
770 | gMC->Gspos("ZPG1", 1, "ZPST", 0.-dx, 0.+dy, 0., 0, "ONLY"); | |
771 | gMC->Gspos("ZPG2", 1, "ZPST", 0.+dx, 0.+dy, 0., 0, "ONLY"); | |
772 | gMC->Gspos("ZPG3", 1, "ZPST", 0.-dx, 0.-dy, 0., 0, "ONLY"); | |
773 | gMC->Gspos("ZPG4", 1, "ZPST", 0.+dx, 0.-dy, 0., 0, "ONLY"); | |
774 | ||
775 | // --- Position the fibers in the grooves | |
776 | gMC->Gspos("ZPF1", 1, "ZPG1", 0., 0., 0., 0, "ONLY"); | |
777 | gMC->Gspos("ZPF2", 1, "ZPG2", 0., 0., 0., 0, "ONLY"); | |
778 | gMC->Gspos("ZPF3", 1, "ZPG3", 0., 0., 0., 0, "ONLY"); | |
779 | gMC->Gspos("ZPF4", 1, "ZPG4", 0., 0., 0., 0, "ONLY"); | |
780 | ||
781 | ||
782 | // --- Position the proton calorimeter in ZDC | |
783 | gMC->Gspos("ZPRO", 1, "ZDC ", fPosZP[0], fPosZP[1], fPosZP[2] + fDimZP[2], 0, "ONLY"); | |
866ab5a2 | 784 | |
785 | ||
a2216698 | 786 | // ------------------------------------------------------------------------------- |
787 | // -> EM calorimeter (ZEM) | |
866ab5a2 | 788 | |
789 | gMC->Gsvolu("ZEM ", "PARA", idtmed[10], fDimZEM, 6); | |
a2216698 | 790 | |
791 | Int_t irot1, irot2; | |
866ab5a2 | 792 | |
a2216698 | 793 | gMC->Matrix(irot1,0.,0.,90.,90.,90.,180.); // Rotation matrix 1 |
866ab5a2 | 794 | gMC->Matrix(irot2,180.,0.,90.,fDimZEM[3]+90.,90.,fDimZEM[3]); // Rotation matrix 2 |
795 | // printf("irot1 = %d, irot2 = %d \n", irot1, irot2); | |
796 | ||
797 | gMC->Gsvolu("ZEMF", "TUBE", idtmed[3], fFibZEM, 3); // Active material | |
798 | ||
799 | gMC->Gsdvn("ZETR", "ZEM ", fDivZEM[2], 1); // Tranches | |
800 | ||
801 | DimPb[0] = fDimZEMPb; // Lead slices | |
802 | DimPb[1] = fDimZEM[2]; | |
803 | DimPb[2] = fDimZEM[1]; | |
804 | DimPb[3] = 90.-fDimZEM[3]; | |
805 | DimPb[4] = 0.; | |
806 | DimPb[5] = 0.; | |
a2216698 | 807 | gMC->Gsvolu("ZEL0", "PARA", idtmed[5], DimPb, 6); |
808 | gMC->Gsvolu("ZEL1", "PARA", idtmed[5], DimPb, 6); | |
809 | gMC->Gsvolu("ZEL2", "PARA", idtmed[5], DimPb, 6); | |
866ab5a2 | 810 | |
811 | // --- Position the lead slices in the tranche | |
812 | Float_t zTran = fDimZEM[0]/fDivZEM[2]; | |
813 | Float_t zTrPb = -zTran+fDimZEMPb; | |
814 | gMC->Gspos("ZEL0", 1, "ZETR", zTrPb, 0., 0., 0, "ONLY"); | |
815 | gMC->Gspos("ZEL1", 1, "ZETR", fDimZEMPb, 0., 0., 0, "ONLY"); | |
816 | ||
817 | // --- Vacuum zone (to be filled with fibres) | |
818 | DimVoid[0] = (zTran-2*fDimZEMPb)/2.; | |
819 | DimVoid[1] = fDimZEM[2]; | |
820 | DimVoid[2] = fDimZEM[1]; | |
821 | DimVoid[3] = 90.-fDimZEM[3]; | |
822 | DimVoid[4] = 0.; | |
823 | DimVoid[5] = 0.; | |
824 | gMC->Gsvolu("ZEV0", "PARA", idtmed[10], DimVoid,6); | |
825 | gMC->Gsvolu("ZEV1", "PARA", idtmed[10], DimVoid,6); | |
826 | ||
827 | // --- Divide the vacuum slice into sticks along x axis | |
828 | gMC->Gsdvn("ZES0", "ZEV0", fDivZEM[0], 3); | |
829 | gMC->Gsdvn("ZES1", "ZEV1", fDivZEM[0], 3); | |
830 | ||
831 | // --- Positioning the fibers into the sticks | |
832 | gMC->Gspos("ZEMF", 1,"ZES0", 0., 0., 0., irot2, "ONLY"); | |
833 | gMC->Gspos("ZEMF", 1,"ZES1", 0., 0., 0., irot2, "ONLY"); | |
834 | ||
835 | // --- Positioning the vacuum slice into the tranche | |
836 | Float_t DisplFib = fDimZEM[1]/fDivZEM[0]; | |
837 | gMC->Gspos("ZEV0", 1,"ZETR", -DimVoid[0], 0., 0., 0, "ONLY"); | |
838 | gMC->Gspos("ZEV1", 1,"ZETR", -DimVoid[0]+zTran, 0., DisplFib, 0, "ONLY"); | |
839 | ||
840 | // --- Positioning the ZEM into the ZDC - rotation for 90 degrees | |
841 | gMC->Gspos("ZEM ", 1,"ZDC ", fPosZEM[0], fPosZEM[1], fPosZEM[2], irot1, "ONLY"); | |
842 | ||
843 | // --- Adding last slice at the end of the EM calorimeter | |
844 | Float_t zLastSlice = fPosZEM[2]+fDimZEMPb+fDimZEM[0]; | |
845 | gMC->Gspos("ZEL2", 1,"ZDC ", fPosZEM[0], fPosZEM[1], zLastSlice, irot1, "ONLY"); | |
68ca986e | 846 | |
847 | } | |
848 | ||
849 | //_____________________________________________________________________________ | |
850 | void AliZDCv1::DrawModule() | |
851 | { | |
852 | // | |
853 | // Draw a shaded view of the Zero Degree Calorimeter version 1 | |
854 | // | |
855 | ||
856 | // Set everything unseen | |
857 | gMC->Gsatt("*", "seen", -1); | |
858 | // | |
859 | // Set ALIC mother transparent | |
860 | gMC->Gsatt("ALIC","SEEN",0); | |
861 | // | |
862 | // Set the volumes visible | |
863 | gMC->Gsatt("ZDC ","SEEN",0); | |
a2216698 | 864 | gMC->Gsatt("QT01","SEEN",1); |
865 | gMC->Gsatt("QT02","SEEN",1); | |
866 | gMC->Gsatt("QT03","SEEN",1); | |
867 | gMC->Gsatt("QT04","SEEN",1); | |
868 | gMC->Gsatt("QT05","SEEN",1); | |
869 | gMC->Gsatt("QT06","SEEN",1); | |
870 | gMC->Gsatt("QT07","SEEN",1); | |
871 | gMC->Gsatt("QT08","SEEN",1); | |
872 | gMC->Gsatt("QT09","SEEN",1); | |
873 | gMC->Gsatt("QT10","SEEN",1); | |
874 | gMC->Gsatt("QT11","SEEN",1); | |
875 | gMC->Gsatt("QT12","SEEN",1); | |
876 | gMC->Gsatt("QT13","SEEN",1); | |
877 | gMC->Gsatt("QT14","SEEN",1); | |
878 | gMC->Gsatt("QT15","SEEN",1); | |
879 | gMC->Gsatt("QT16","SEEN",1); | |
880 | gMC->Gsatt("QT17","SEEN",1); | |
881 | gMC->Gsatt("QT18","SEEN",1); | |
882 | gMC->Gsatt("QC01","SEEN",1); | |
883 | gMC->Gsatt("QC02","SEEN",1); | |
884 | gMC->Gsatt("QC03","SEEN",1); | |
885 | gMC->Gsatt("QC04","SEEN",1); | |
886 | gMC->Gsatt("QC05","SEEN",1); | |
887 | gMC->Gsatt("QTD1","SEEN",1); | |
888 | gMC->Gsatt("QTD2","SEEN",1); | |
889 | gMC->Gsatt("QTD3","SEEN",1); | |
68ca986e | 890 | gMC->Gsatt("MQXL","SEEN",1); |
891 | gMC->Gsatt("YMQL","SEEN",1); | |
892 | gMC->Gsatt("MQX ","SEEN",1); | |
893 | gMC->Gsatt("YMQ ","SEEN",1); | |
a2216698 | 894 | gMC->Gsatt("ZQYX","SEEN",1); |
895 | gMC->Gsatt("MD1 ","SEEN",1); | |
896 | gMC->Gsatt("MD1V","SEEN",1); | |
68ca986e | 897 | gMC->Gsatt("YD1 ","SEEN",1); |
a2216698 | 898 | gMC->Gsatt("MD2 ","SEEN",1); |
68ca986e | 899 | gMC->Gsatt("YD2 ","SEEN",1); |
900 | gMC->Gsatt("ZNEU","SEEN",0); | |
901 | gMC->Gsatt("ZNF1","SEEN",0); | |
902 | gMC->Gsatt("ZNF2","SEEN",0); | |
903 | gMC->Gsatt("ZNF3","SEEN",0); | |
904 | gMC->Gsatt("ZNF4","SEEN",0); | |
905 | gMC->Gsatt("ZNG1","SEEN",0); | |
906 | gMC->Gsatt("ZNG2","SEEN",0); | |
907 | gMC->Gsatt("ZNG3","SEEN",0); | |
908 | gMC->Gsatt("ZNG4","SEEN",0); | |
909 | gMC->Gsatt("ZNTX","SEEN",0); | |
a2216698 | 910 | gMC->Gsatt("ZN1 ","COLO",4); |
68ca986e | 911 | gMC->Gsatt("ZN1 ","SEEN",1); |
912 | gMC->Gsatt("ZNSL","SEEN",0); | |
913 | gMC->Gsatt("ZNST","SEEN",0); | |
914 | gMC->Gsatt("ZPRO","SEEN",0); | |
915 | gMC->Gsatt("ZPF1","SEEN",0); | |
916 | gMC->Gsatt("ZPF2","SEEN",0); | |
917 | gMC->Gsatt("ZPF3","SEEN",0); | |
918 | gMC->Gsatt("ZPF4","SEEN",0); | |
919 | gMC->Gsatt("ZPG1","SEEN",0); | |
920 | gMC->Gsatt("ZPG2","SEEN",0); | |
921 | gMC->Gsatt("ZPG3","SEEN",0); | |
922 | gMC->Gsatt("ZPG4","SEEN",0); | |
923 | gMC->Gsatt("ZPTX","SEEN",0); | |
a2216698 | 924 | gMC->Gsatt("ZP1 ","COLO",6); |
68ca986e | 925 | gMC->Gsatt("ZP1 ","SEEN",1); |
926 | gMC->Gsatt("ZPSL","SEEN",0); | |
927 | gMC->Gsatt("ZPST","SEEN",0); | |
a2216698 | 928 | gMC->Gsatt("ZEM ","COLO",7); |
866ab5a2 | 929 | gMC->Gsatt("ZEM ","SEEN",1); |
930 | gMC->Gsatt("ZEMF","SEEN",0); | |
931 | gMC->Gsatt("ZETR","SEEN",0); | |
932 | gMC->Gsatt("ZEL0","SEEN",0); | |
933 | gMC->Gsatt("ZEL1","SEEN",0); | |
934 | gMC->Gsatt("ZEL2","SEEN",0); | |
935 | gMC->Gsatt("ZEV0","SEEN",0); | |
936 | gMC->Gsatt("ZEV1","SEEN",0); | |
937 | gMC->Gsatt("ZES0","SEEN",0); | |
938 | gMC->Gsatt("ZES1","SEEN",0); | |
68ca986e | 939 | |
940 | // | |
941 | gMC->Gdopt("hide", "on"); | |
942 | gMC->Gdopt("shad", "on"); | |
943 | gMC->Gsatt("*", "fill", 7); | |
944 | gMC->SetClipBox("."); | |
945 | gMC->SetClipBox("*", 0, 100, -100, 100, 12000, 16000); | |
946 | gMC->DefaultRange(); | |
947 | gMC->Gdraw("alic", 40, 30, 0, 488, 220, .07, .07); | |
948 | gMC->Gdhead(1111, "Zero Degree Calorimeter Version 1"); | |
949 | gMC->Gdman(18, 4, "MAN"); | |
950 | } | |
951 | ||
952 | //_____________________________________________________________________________ | |
953 | void AliZDCv1::CreateMaterials() | |
954 | { | |
955 | // | |
956 | // Create Materials for the Zero Degree Calorimeter | |
957 | // | |
68ca986e | 958 | |
959 | Int_t *idtmed = fIdtmed->GetArray(); | |
960 | ||
a2216698 | 961 | Float_t dens, ubuf[1], wmat[2], a[2], z[2], deemax = -1; |
962 | Int_t i; | |
68ca986e | 963 | |
964 | // --- Store in UBUF r0 for nuclear radius calculation R=r0*A**1/3 | |
965 | ||
966 | // --- Tantalum -> ZN passive material | |
967 | ubuf[0] = 1.1; | |
968 | AliMaterial(1, "TANT", 180.95, 73., 16.65, .4, 11.9, ubuf, 1); | |
969 | ||
970 | // --- Tungsten | |
971 | // ubuf[0] = 1.11; | |
972 | // AliMaterial(1, "TUNG", 183.85, 74., 19.3, .35, 10.3, ubuf, 1); | |
973 | ||
974 | // --- Brass (CuZn) -> ZP passive material | |
975 | dens = 8.48; | |
976 | a[0] = 63.546; | |
977 | a[1] = 65.39; | |
978 | z[0] = 29.; | |
979 | z[1] = 30.; | |
980 | wmat[0] = .63; | |
981 | wmat[1] = .37; | |
982 | AliMixture(2, "BRASS ", a, z, dens, 2, wmat); | |
983 | ||
984 | // --- SiO2 | |
985 | dens = 2.64; | |
986 | a[0] = 28.086; | |
987 | a[1] = 15.9994; | |
988 | z[0] = 14.; | |
989 | z[1] = 8.; | |
990 | wmat[0] = 1.; | |
991 | wmat[1] = 2.; | |
a2216698 | 992 | AliMixture(3, "SIO2 ", a, z, dens, -2, wmat); |
866ab5a2 | 993 | |
994 | // --- Lead | |
995 | ubuf[0] = 1.12; | |
996 | AliMaterial(5, "LEAD", 207.19, 82., 11.35, .56, 18.5, ubuf, 1); | |
68ca986e | 997 | |
998 | // --- Copper | |
a2216698 | 999 | ubuf[0] = 1.10; |
1000 | AliMaterial(6, "COPP", 63.54, 29., 8.96, 1.4, 0., ubuf, 1); | |
68ca986e | 1001 | |
866ab5a2 | 1002 | // --- Iron (energy loss taken into account) |
1003 | ubuf[0] = 1.1; | |
a2216698 | 1004 | AliMaterial(7, "IRON", 55.85, 26., 7.87, 1.76, 0., ubuf, 1); |
68ca986e | 1005 | |
866ab5a2 | 1006 | // --- Iron (no energy loss) |
68ca986e | 1007 | ubuf[0] = 1.1; |
a2216698 | 1008 | AliMaterial(8, "IRON", 55.85, 26., 7.87, 1.76, 0., ubuf, 1); |
68ca986e | 1009 | |
1010 | // --- Vacuum (no magnetic field) | |
1011 | AliMaterial(10, "VOID", 1e-16, 1e-16, 1e-16, 1e16, 1e16, ubuf,0); | |
1012 | ||
1013 | // --- Vacuum (with magnetic field) | |
1014 | AliMaterial(11, "VOIM", 1e-16, 1e-16, 1e-16, 1e16, 1e16, ubuf,0); | |
1015 | ||
1016 | // --- Air (no magnetic field) | |
1017 | AliMaterial(12, "Air $", 14.61, 7.3, .001205, 30420., 67500., ubuf, 0); | |
1018 | ||
1019 | // --- Definition of tracking media: | |
1020 | ||
1021 | // --- Tantalum = 1 ; | |
1022 | // --- Brass = 2 ; | |
1023 | // --- Fibers (SiO2) = 3 ; | |
1024 | // --- Fibers (SiO2) = 4 ; | |
866ab5a2 | 1025 | // --- Lead = 5 ; |
a2216698 | 1026 | // --- Copper = 6 ; |
1027 | // --- Iron (with energy loss) = 7 ; | |
1028 | // --- Iron (without energy loss) = 8 ; | |
68ca986e | 1029 | // --- Vacuum (no field) = 10 |
1030 | // --- Vacuum (with field) = 11 | |
1031 | // --- Air (no field) = 12 | |
1032 | ||
1033 | ||
1034 | // --- Tracking media parameters | |
a2216698 | 1035 | Float_t epsil = .01, stmin=0.01, stemax = 1.; |
1036 | Int_t isxfld = gAlice->Field()->Integ(); | |
d213f1fa | 1037 | // Float_t fieldm = gAlice->Field()->Max(); |
de28527d | 1038 | Float_t fieldm = 0., tmaxfd = 0.; |
a2216698 | 1039 | Int_t ifield = 0, isvolActive = 1, isvol = 0, inofld = 0; |
68ca986e | 1040 | |
1041 | AliMedium(1, "ZTANT", 1, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); | |
1042 | // AliMedium(1, "ZW", 1, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); | |
a2216698 | 1043 | AliMedium(2, "ZBRASS",2, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); |
68ca986e | 1044 | AliMedium(3, "ZSIO2", 3, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); |
1045 | AliMedium(4, "ZQUAR", 3, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); | |
a2216698 | 1046 | AliMedium(5, "ZLEAD", 5, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); |
de28527d | 1047 | // AliMedium(6, "ZCOPP", 6, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); |
1048 | // AliMedium(7, "ZIRON", 7, isvolActive, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); | |
1049 | AliMedium(6, "ZCOPP", 6, isvol, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); | |
1050 | AliMedium(7, "ZIRON", 7, isvol, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); | |
a2216698 | 1051 | AliMedium(8, "ZIRONN",8, isvol, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); |
1052 | AliMedium(10,"ZVOID",10, isvol, inofld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); | |
1053 | AliMedium(12,"ZAIR", 12, 0, inofld, fieldm, tmaxfd, stemax,deemax, epsil, stmin); | |
1054 | ||
1055 | ifield =2; | |
68ca986e | 1056 | fieldm = 45.; |
1057 | AliMedium(11, "ZVOIM", 11, isvol, isxfld, fieldm, tmaxfd, stemax, deemax, epsil, stmin); | |
1058 | ||
1059 | // Thresholds for showering in the ZDCs | |
a2216698 | 1060 | i = 1; //tantalum |
68ca986e | 1061 | gMC->Gstpar(idtmed[i], "CUTGAM", .001); |
1062 | gMC->Gstpar(idtmed[i], "CUTELE", .001); | |
1063 | gMC->Gstpar(idtmed[i], "CUTNEU", .01); | |
1064 | gMC->Gstpar(idtmed[i], "CUTHAD", .01); | |
a2216698 | 1065 | i = 2; //brass |
68ca986e | 1066 | gMC->Gstpar(idtmed[i], "CUTGAM", .001); |
1067 | gMC->Gstpar(idtmed[i], "CUTELE", .001); | |
1068 | gMC->Gstpar(idtmed[i], "CUTNEU", .01); | |
1069 | gMC->Gstpar(idtmed[i], "CUTHAD", .01); | |
a2216698 | 1070 | i = 5; //lead |
866ab5a2 | 1071 | gMC->Gstpar(idtmed[i], "CUTGAM", .001); |
1072 | gMC->Gstpar(idtmed[i], "CUTELE", .001); | |
1073 | gMC->Gstpar(idtmed[i], "CUTNEU", .01); | |
1074 | gMC->Gstpar(idtmed[i], "CUTHAD", .01); | |
68ca986e | 1075 | |
d213f1fa | 1076 | // Avoid too detailed showering in TDI |
1077 | i = 6; //copper | |
1078 | gMC->Gstpar(idtmed[i], "CUTGAM", .1); | |
1079 | gMC->Gstpar(idtmed[i], "CUTELE", .1); | |
1080 | gMC->Gstpar(idtmed[i], "CUTNEU", 1.); | |
1081 | gMC->Gstpar(idtmed[i], "CUTHAD", 1.); | |
1082 | ||
68ca986e | 1083 | // Avoid too detailed showering along the beam line |
a2216698 | 1084 | i = 7; //iron with energy loss (ZIRON) |
68ca986e | 1085 | gMC->Gstpar(idtmed[i], "CUTGAM", .1); |
1086 | gMC->Gstpar(idtmed[i], "CUTELE", .1); | |
1087 | gMC->Gstpar(idtmed[i], "CUTNEU", 1.); | |
1088 | gMC->Gstpar(idtmed[i], "CUTHAD", 1.); | |
1089 | ||
d213f1fa | 1090 | // Avoid too detailed showering along the beam line |
1091 | i = 8; //iron with energy loss (ZIRONN) | |
1092 | gMC->Gstpar(idtmed[i], "CUTGAM", .1); | |
1093 | gMC->Gstpar(idtmed[i], "CUTELE", .1); | |
1094 | gMC->Gstpar(idtmed[i], "CUTNEU", 1.); | |
1095 | gMC->Gstpar(idtmed[i], "CUTHAD", 1.); | |
1096 | ||
68ca986e | 1097 | // Avoid interaction in fibers (only energy loss allowed) |
a2216698 | 1098 | i = 3; //fibers (ZSI02) |
68ca986e | 1099 | gMC->Gstpar(idtmed[i], "DCAY", 0.); |
1100 | gMC->Gstpar(idtmed[i], "MULS", 0.); | |
1101 | gMC->Gstpar(idtmed[i], "PFIS", 0.); | |
1102 | gMC->Gstpar(idtmed[i], "MUNU", 0.); | |
1103 | gMC->Gstpar(idtmed[i], "LOSS", 1.); | |
1104 | gMC->Gstpar(idtmed[i], "PHOT", 0.); | |
1105 | gMC->Gstpar(idtmed[i], "COMP", 0.); | |
1106 | gMC->Gstpar(idtmed[i], "PAIR", 0.); | |
1107 | gMC->Gstpar(idtmed[i], "BREM", 0.); | |
1108 | gMC->Gstpar(idtmed[i], "DRAY", 0.); | |
1109 | gMC->Gstpar(idtmed[i], "ANNI", 0.); | |
1110 | gMC->Gstpar(idtmed[i], "HADR", 0.); | |
a2216698 | 1111 | i = 4; //fibers (ZQUAR) |
68ca986e | 1112 | gMC->Gstpar(idtmed[i], "DCAY", 0.); |
1113 | gMC->Gstpar(idtmed[i], "MULS", 0.); | |
1114 | gMC->Gstpar(idtmed[i], "PFIS", 0.); | |
1115 | gMC->Gstpar(idtmed[i], "MUNU", 0.); | |
1116 | gMC->Gstpar(idtmed[i], "LOSS", 1.); | |
1117 | gMC->Gstpar(idtmed[i], "PHOT", 0.); | |
1118 | gMC->Gstpar(idtmed[i], "COMP", 0.); | |
1119 | gMC->Gstpar(idtmed[i], "PAIR", 0.); | |
1120 | gMC->Gstpar(idtmed[i], "BREM", 0.); | |
1121 | gMC->Gstpar(idtmed[i], "DRAY", 0.); | |
1122 | gMC->Gstpar(idtmed[i], "ANNI", 0.); | |
1123 | gMC->Gstpar(idtmed[i], "HADR", 0.); | |
866ab5a2 | 1124 | |
1125 | // Avoid interaction in void | |
d213f1fa | 1126 | i = 11; //void with field |
1127 | gMC->Gstpar(idtmed[i], "DCAY", 0.); | |
1128 | gMC->Gstpar(idtmed[i], "MULS", 0.); | |
1129 | gMC->Gstpar(idtmed[i], "PFIS", 0.); | |
1130 | gMC->Gstpar(idtmed[i], "MUNU", 0.); | |
1131 | gMC->Gstpar(idtmed[i], "LOSS", 0.); | |
1132 | gMC->Gstpar(idtmed[i], "PHOT", 0.); | |
1133 | gMC->Gstpar(idtmed[i], "COMP", 0.); | |
1134 | gMC->Gstpar(idtmed[i], "PAIR", 0.); | |
1135 | gMC->Gstpar(idtmed[i], "BREM", 0.); | |
1136 | gMC->Gstpar(idtmed[i], "DRAY", 0.); | |
1137 | gMC->Gstpar(idtmed[i], "ANNI", 0.); | |
1138 | gMC->Gstpar(idtmed[i], "HADR", 0.); | |
866ab5a2 | 1139 | |
68ca986e | 1140 | // |
866ab5a2 | 1141 | fMedSensZN = idtmed[1]; // Sensitive volume: ZN passive material |
1142 | fMedSensZP = idtmed[2]; // Sensitive volume: ZP passive material | |
a2216698 | 1143 | fMedSensF1 = idtmed[3]; // Sensitive volume: fibres type 1 |
1144 | fMedSensF2 = idtmed[4]; // Sensitive volume: fibres type 2 | |
1145 | fMedSensZEM = idtmed[5]; // Sensitive volume: ZEM passive material | |
de28527d | 1146 | // fMedSensTDI = idtmed[6]; // Sensitive volume: TDI Cu shield |
1147 | // fMedSensPI = idtmed[7]; // Sensitive volume: beam pipes | |
866ab5a2 | 1148 | fMedSensGR = idtmed[12]; // Sensitive volume: air into the grooves |
68ca986e | 1149 | } |
1150 | ||
1151 | //_____________________________________________________________________________ | |
1152 | void AliZDCv1::Init() | |
1153 | { | |
1154 | InitTables(); | |
68ca986e | 1155 | } |
1156 | ||
1157 | //_____________________________________________________________________________ | |
1158 | void AliZDCv1::InitTables() | |
1159 | { | |
c0ceba4c | 1160 | Int_t k, j; |
5a881c97 | 1161 | |
866ab5a2 | 1162 | char *lightfName1,*lightfName2,*lightfName3,*lightfName4, |
1163 | *lightfName5,*lightfName6,*lightfName7,*lightfName8; | |
68ca986e | 1164 | FILE *fp1, *fp2, *fp3, *fp4, *fp5, *fp6, *fp7, *fp8; |
1165 | ||
a2216698 | 1166 | // --- Reading light tables for ZN |
866ab5a2 | 1167 | lightfName1 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620362207s"); |
1168 | if((fp1 = fopen(lightfName1,"r")) == NULL){ | |
68ca986e | 1169 | printf("Cannot open file fp1 \n"); |
1170 | return; | |
1171 | } | |
866ab5a2 | 1172 | lightfName2 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620362208s"); |
1173 | if((fp2 = fopen(lightfName2,"r")) == NULL){ | |
68ca986e | 1174 | printf("Cannot open file fp2 \n"); |
1175 | return; | |
1176 | } | |
866ab5a2 | 1177 | lightfName3 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620362209s"); |
1178 | if((fp3 = fopen(lightfName3,"r")) == NULL){ | |
68ca986e | 1179 | printf("Cannot open file fp3 \n"); |
1180 | return; | |
1181 | } | |
866ab5a2 | 1182 | lightfName4 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620362210s"); |
1183 | if((fp4 = fopen(lightfName4,"r")) == NULL){ | |
68ca986e | 1184 | printf("Cannot open file fp4 \n"); |
1185 | return; | |
1186 | } | |
a2216698 | 1187 | |
c0ceba4c | 1188 | for(k=0; k<fNalfan; k++){ |
1189 | for(j=0; j<fNben; j++){ | |
68ca986e | 1190 | fscanf(fp1,"%f",&fTablen[0][k][j]); |
1191 | fscanf(fp2,"%f",&fTablen[1][k][j]); | |
1192 | fscanf(fp3,"%f",&fTablen[2][k][j]); | |
1193 | fscanf(fp4,"%f",&fTablen[3][k][j]); | |
1194 | } | |
1195 | } | |
1196 | fclose(fp1); | |
1197 | fclose(fp2); | |
1198 | fclose(fp3); | |
1199 | fclose(fp4); | |
1200 | ||
a2216698 | 1201 | // --- Reading light tables for ZP and ZEM |
866ab5a2 | 1202 | lightfName5 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620552207s"); |
1203 | if((fp5 = fopen(lightfName5,"r")) == NULL){ | |
68ca986e | 1204 | printf("Cannot open file fp5 \n"); |
1205 | return; | |
1206 | } | |
866ab5a2 | 1207 | lightfName6 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620552208s"); |
1208 | if((fp6 = fopen(lightfName6,"r")) == NULL){ | |
68ca986e | 1209 | printf("Cannot open file fp6 \n"); |
1210 | return; | |
1211 | } | |
866ab5a2 | 1212 | lightfName7 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620552209s"); |
1213 | if((fp7 = fopen(lightfName7,"r")) == NULL){ | |
68ca986e | 1214 | printf("Cannot open file fp7 \n"); |
1215 | return; | |
1216 | } | |
866ab5a2 | 1217 | lightfName8 = gSystem->ExpandPathName("$ALICE/$ALICE_LEVEL/ZDC/light22620552210s"); |
1218 | if((fp8 = fopen(lightfName8,"r")) == NULL){ | |
68ca986e | 1219 | printf("Cannot open file fp8 \n"); |
1220 | return; | |
1221 | } | |
a2216698 | 1222 | |
c0ceba4c | 1223 | for(k=0; k<fNalfap; k++){ |
1224 | for(j=0; j<fNbep; j++){ | |
68ca986e | 1225 | fscanf(fp5,"%f",&fTablep[0][k][j]); |
1226 | fscanf(fp6,"%f",&fTablep[1][k][j]); | |
1227 | fscanf(fp7,"%f",&fTablep[2][k][j]); | |
1228 | fscanf(fp8,"%f",&fTablep[3][k][j]); | |
1229 | } | |
1230 | } | |
1231 | fclose(fp5); | |
1232 | fclose(fp6); | |
1233 | fclose(fp7); | |
1234 | fclose(fp8); | |
1235 | } | |
5ce39387 | 1236 | |
1237 | //_____________________________________________________________________________ | |
1238 | Int_t AliZDCv1::Digitize(Int_t Det, Int_t Quad, Int_t Light) | |
1239 | { | |
1240 | // Evaluation of the ADC channel corresponding to the light yield Light | |
1241 | ||
9d7316ac | 1242 | if(fDebug == 1){ |
1243 | printf("\n Digitize -> Det = %d, Quad = %d, Light = %d\n", Det, Quad, Light); | |
1244 | } | |
5ce39387 | 1245 | |
5a881c97 | 1246 | // Parameters for conversion of light yield in ADC channels |
1247 | Float_t fPMGain[3][5]; // PM gain | |
1248 | Float_t fADCRes; // ADC conversion factor | |
1249 | ||
5ce39387 | 1250 | Int_t j,i; |
1251 | for(i=0; i<3; i++){ | |
1252 | for(j=0; j<5; j++){ | |
0c9b76ab | 1253 | fPMGain[i][j] = 100000.; |
5ce39387 | 1254 | } |
1255 | } | |
1256 | fADCRes = 0.00000064; // ADC Resolution: 250 fC/ADCch | |
1257 | ||
0c9b76ab | 1258 | Int_t ADCch = Int_t(Light*fPMGain[Det-1][Quad]*fADCRes); |
5a881c97 | 1259 | |
5ce39387 | 1260 | return ADCch; |
1261 | } | |
2ab0c725 | 1262 | |
5ce39387 | 1263 | |
2ab0c725 | 1264 | //_____________________________________________________________________________ |
1265 | void AliZDCv1::SDigits2Digits() | |
1266 | { | |
1267 | Hits2Digits(gAlice->GetNtrack()); | |
1268 | } | |
5ce39387 | 1269 | |
2ab0c725 | 1270 | //_____________________________________________________________________________ |
1271 | void AliZDCv1::Hits2Digits(Int_t ntracks) | |
1272 | { | |
5ce39387 | 1273 | AliZDCDigit *newdigit; |
1274 | AliZDCHit *hit; | |
1275 | ||
1276 | Int_t PMCZN = 0, PMCZP = 0, PMQZN[4], PMQZP[4], PMZEM = 0; | |
1277 | ||
cc9c0243 | 1278 | Int_t i; |
1279 | for(i=0; i<4; i++){ | |
1280 | PMQZN[i] =0; | |
1281 | PMQZP[i] =0; | |
5ce39387 | 1282 | } |
1283 | ||
cc9c0243 | 1284 | Int_t itrack = 0; |
1285 | for(itrack=0; itrack<ntracks; itrack++){ | |
1286 | gAlice->ResetHits(); | |
1287 | gAlice->TreeH()->GetEvent(itrack); | |
1288 | for(i=0; i<fHits->GetEntries(); i++){ | |
1289 | hit = (AliZDCHit*)fHits->At(i); | |
1290 | Int_t det = hit->GetVolume(0); | |
1291 | Int_t quad = hit->GetVolume(1); | |
1292 | Int_t lightQ = Int_t(hit->GetLightPMQ()); | |
1293 | Int_t lightC = Int_t(hit->GetLightPMC()); | |
1294 | if(fDebug == 1) | |
1295 | printf(" \n itrack = %d, fNhits = %d, det = %d, quad = %d," | |
1296 | "lightC = %d lightQ = %d\n", itrack, fNhits, det, quad, lightC, lightQ); | |
1297 | ||
1298 | if(det == 1){ //ZN | |
1299 | PMCZN = PMCZN + lightC; | |
1300 | PMQZN[quad-1] = PMQZN[quad-1] + lightQ; | |
1301 | } | |
5ce39387 | 1302 | |
cc9c0243 | 1303 | if(det == 2){ //ZP |
1304 | PMCZP = PMCZP + lightC; | |
1305 | PMQZP[quad-1] = PMQZP[quad-1] + lightQ; | |
1306 | } | |
5ce39387 | 1307 | |
cc9c0243 | 1308 | if(det == 3){ //ZEM |
1309 | PMZEM = PMZEM + lightC; | |
1310 | } | |
1311 | } // Hits loop | |
1312 | ||
0c9b76ab | 1313 | } // Tracks loop |
1314 | ||
cc9c0243 | 1315 | if(fDebug == 1){ |
1316 | printf("\n PMCZN = %d, PMQZN[0] = %d, PMQZN[1] = %d, PMQZN[2] = %d, PMQZN[3] = %d\n" | |
1317 | , PMCZN, PMQZN[0], PMQZN[1], PMQZN[2], PMQZN[3]); | |
1318 | printf("\n PMCZP = %d, PMQZP[0] = %d, PMQZP[1] = %d, PMQZP[2] = %d, PMQZP[3] = %d\n" | |
1319 | , PMCZP, PMQZP[0], PMQZP[1], PMQZP[2], PMQZP[3]); | |
1320 | printf("\n PMZEM = %d\n", PMZEM); | |
5ce39387 | 1321 | } |
5ce39387 | 1322 | |
1323 | // ------------------------------------ Hits2Digits | |
1324 | // Digits for ZN | |
cc9c0243 | 1325 | newdigit = new AliZDCDigit(1, 0, Digitize(1, 0, PMCZN)); |
1326 | new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit); | |
1327 | fNdigits++; | |
1328 | delete newdigit; | |
5ce39387 | 1329 | |
cc9c0243 | 1330 | Int_t j; |
1331 | for(j=0; j<4; j++){ | |
1332 | newdigit = new AliZDCDigit(1, j+1, Digitize(1, j+1, PMQZN[j])); | |
1333 | new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit); | |
1334 | fNdigits++; | |
1335 | delete newdigit; | |
1336 | } | |
1337 | ||
1338 | // Digits for ZP | |
1339 | newdigit = new AliZDCDigit(2, 0, Digitize(2, 0, PMCZP)); | |
1340 | new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit); | |
5ce39387 | 1341 | fNdigits++; |
1342 | delete newdigit; | |
5ce39387 | 1343 | |
cc9c0243 | 1344 | Int_t k; |
1345 | for(k=0; k<4; k++){ | |
1346 | newdigit = new AliZDCDigit(2, k+1, Digitize(2, k+1, PMQZP[k])); | |
1347 | new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit); | |
1348 | fNdigits++; | |
1349 | delete newdigit; | |
1350 | } | |
5ce39387 | 1351 | |
cc9c0243 | 1352 | // Digits for ZEM |
1353 | newdigit = new AliZDCDigit(3, 0, Digitize(3, 0, PMZEM)); | |
1354 | new((*fDigits)[fNdigits]) AliZDCDigit(*newdigit); | |
5ce39387 | 1355 | fNdigits++; |
1356 | delete newdigit; | |
5ce39387 | 1357 | |
1358 | ||
1359 | gAlice->TreeD()->Fill(); | |
cc9c0243 | 1360 | gAlice->TreeD()->Write(0,TObject::kOverwrite); |
5ce39387 | 1361 | |
a2216698 | 1362 | // if(fDebug == 1){ |
1363 | // printf("\n Event Digits -----------------------------------------------------\n"); | |
1364 | // fDigits->Print(""); | |
1365 | // } | |
5ce39387 | 1366 | |
1367 | } | |
1368 | //_____________________________________________________________________________ | |
9e1a0ddb | 1369 | void AliZDCv1::MakeBranch(Option_t *opt, const char *file) |
5ce39387 | 1370 | { |
1371 | // | |
1372 | // Create a new branch in the current Root Tree | |
1373 | // | |
1374 | ||
1375 | AliDetector::MakeBranch(opt); | |
1376 | ||
2ab0c725 | 1377 | Char_t branchname[10]; |
5ce39387 | 1378 | sprintf(branchname,"%s",GetName()); |
5cf7bbad | 1379 | const char *cD = strstr(opt,"D"); |
5ce39387 | 1380 | |
7d285fe3 | 1381 | if (gAlice->TreeD() && cD) { |
2ab0c725 | 1382 | |
1383 | // Creation of the digits from hits | |
1384 | ||
1385 | if(fDigits!=0) fDigits->Clear(); | |
1386 | else fDigits = new TClonesArray ("AliZDCDigit",1000); | |
1387 | char branchname[10]; | |
1388 | sprintf(branchname,"%s",GetName()); | |
9e1a0ddb | 1389 | MakeBranchInTree(gAlice->TreeD(), |
1390 | branchname, &fDigits, fBufferSize, file) ; | |
5ce39387 | 1391 | printf("* AliZDCv1::MakeBranch * Making Branch %s for digits\n\n",branchname); |
a2216698 | 1392 | } |
1393 | ||
5ce39387 | 1394 | } |
68ca986e | 1395 | //_____________________________________________________________________________ |
1396 | void AliZDCv1::StepManager() | |
1397 | { | |
1398 | // | |
1399 | // Routine called at every step in the Zero Degree Calorimeters | |
1400 | // | |
1401 | ||
a2216698 | 1402 | Int_t j, vol[2], ibeta=0, ialfa, ibe, nphe; |
366ff5c2 | 1403 | Float_t x[3], xdet[3], destep, hits[10], m, ekin, um[3], ud[3], be, radius, out; |
68ca986e | 1404 | TLorentzVector s, p; |
1405 | const char *knamed; | |
866ab5a2 | 1406 | |
de6bc247 | 1407 | for (j=0;j<10;j++) hits[j]=0; |
866ab5a2 | 1408 | |
68ca986e | 1409 | if((gMC->GetMedium() == fMedSensZN) || (gMC->GetMedium() == fMedSensZP) || |
1410 | (gMC->GetMedium() == fMedSensGR) || (gMC->GetMedium() == fMedSensF1) || | |
d213f1fa | 1411 | (gMC->GetMedium() == fMedSensF2) || (gMC->GetMedium() == fMedSensZEM)){ |
1412 | // (gMC->GetMedium() == fMedSensPI) || (gMC->GetMedium() == fMedSensTDI)){ | |
cc9c0243 | 1413 | |
866ab5a2 | 1414 | // If particle interacts with beam pipe -> return |
d213f1fa | 1415 | // if((gMC->GetMedium() == fMedSensPI) || (gMC->GetMedium() == fMedSensTDI)){ |
a2216698 | 1416 | // If option NoShower is set -> StopTrack |
d213f1fa | 1417 | // if(fNoShower==1) { |
4f9ca16e | 1418 | // if(gMC->GetMedium() == fMedSensPI) { |
1419 | // knamed = gMC->CurrentVolName(); | |
1420 | // if((!strncmp(knamed,"MQ",2)) || (!strncmp(knamed,"YM",2))) fpLostIT += 1; | |
1421 | // if((!strncmp(knamed,"MD1",3))|| (!strncmp(knamed,"YD1",2))) fpLostD1 += 1; | |
1422 | // } | |
1423 | // if(gMC->GetMedium() == fMedSensTDI) fpLostTDI += 1; | |
d213f1fa | 1424 | // gMC->StopTrack(); |
a2216698 | 1425 | // printf("\n # of p lost in Inner Triplet = %d\n",fpLostIT); |
1426 | // printf("\n # of p lost in D1 = %d\n",fpLostD1); | |
1427 | // printf("\n # of p lost in TDI = %d\n",fpLostTDI); | |
d213f1fa | 1428 | // return; |
1429 | // } | |
1430 | // } | |
866ab5a2 | 1431 | |
68ca986e | 1432 | //Particle coordinates |
1433 | gMC->TrackPosition(s); | |
c0ceba4c | 1434 | for(j=0; j<=2; j++){ |
68ca986e | 1435 | x[j] = s[j]; |
1436 | } | |
1437 | hits[0] = x[0]; | |
1438 | hits[1] = x[1]; | |
1439 | hits[2] = x[2]; | |
1440 | ||
1441 | // Determine in which ZDC the particle is | |
1442 | knamed = gMC->CurrentVolName(); | |
1443 | if(!strncmp(knamed,"ZN",2))vol[0]=1; | |
1444 | if(!strncmp(knamed,"ZP",2))vol[0]=2; | |
866ab5a2 | 1445 | if(!strncmp(knamed,"ZE",2))vol[0]=3; |
68ca986e | 1446 | |
1447 | // Determine in which quadrant the particle is | |
1448 | ||
1449 | //Quadrant in ZN | |
68ca986e | 1450 | if(vol[0]==1){ |
866ab5a2 | 1451 | xdet[0] = x[0]-fPosZN[0]; |
1452 | xdet[1] = x[1]-fPosZN[1]; | |
5a881c97 | 1453 | if((xdet[0]<=0.) && (xdet[1]>=0.)) vol[1]=1; |
1454 | if((xdet[0]>0.) && (xdet[1]>0.)) vol[1]=2; | |
1455 | if((xdet[0]<0.) && (xdet[1]<0.)) vol[1]=3; | |
1456 | if((xdet[0]>0.) && (xdet[1]<0.)) vol[1]=4; | |
68ca986e | 1457 | } |
1458 | ||
1459 | //Quadrant in ZP | |
1460 | if(vol[0]==2){ | |
866ab5a2 | 1461 | xdet[0] = x[0]-fPosZP[0]; |
1462 | xdet[1] = x[1]-fPosZP[1]; | |
1463 | if(xdet[0]>fDimZP[0])xdet[0]=fDimZP[0]-0.01; | |
1464 | if(xdet[0]<-fDimZP[0])xdet[0]=-fDimZP[0]+0.01; | |
68ca986e | 1465 | Float_t xqZP = xdet[0]/(fDimZP[0]/2); |
1466 | for(int i=1; i<=4; i++){ | |
866ab5a2 | 1467 | if(xqZP>=(i-3) && xqZP<(i-2)){ |
68ca986e | 1468 | vol[1] = i; |
de28527d | 1469 | if(i==0) printf("\n!!! vol[1] = 0 -> xqZP = %f\n", xqZP); |
68ca986e | 1470 | break; |
5a881c97 | 1471 | } |
1472 | } | |
68ca986e | 1473 | } |
866ab5a2 | 1474 | |
1475 | //ZEM has only 1 quadrant | |
1476 | if(vol[0] == 3){ | |
1477 | vol[1] = 1; | |
1478 | xdet[0] = x[0]-fPosZEM[0]; | |
1479 | xdet[1] = x[1]-fPosZEM[1]; | |
866ab5a2 | 1480 | } |
1481 | ||
68ca986e | 1482 | // Store impact point and kinetic energy of the ENTERING particle |
1483 | ||
68ca986e | 1484 | // if(Curtrack==Prim){ |
1485 | if(gMC->IsTrackEntering()){ | |
1486 | //Particle energy | |
1487 | gMC->TrackMomentum(p); | |
68ca986e | 1488 | hits[3] = p[3]; |
866ab5a2 | 1489 | // Impact point on ZDC |
68ca986e | 1490 | hits[4] = xdet[0]; |
1491 | hits[5] = xdet[1]; | |
866ab5a2 | 1492 | hits[6] = 0; |
68ca986e | 1493 | hits[7] = 0; |
1494 | hits[8] = 0; | |
1495 | hits[9] = 0; | |
1496 | ||
866ab5a2 | 1497 | // Int_t PcID = gMC->TrackPid(); |
1498 | // printf("Pc ID -> %d\n",PcID); | |
1499 | AddHit(gAlice->CurrentTrack(), vol, hits); | |
1500 | ||
1501 | if(fNoShower==1){ | |
4f9ca16e | 1502 | // fpDetected += 1; |
a2216698 | 1503 | gMC->StopTrack(); |
1504 | // printf("\n # of detected p = %d\n",fpDetected); | |
1505 | return; | |
866ab5a2 | 1506 | } |
68ca986e | 1507 | } |
a2216698 | 1508 | // } // Curtrack IF |
68ca986e | 1509 | |
1510 | // Charged particles -> Energy loss | |
1511 | if((destep=gMC->Edep())){ | |
1512 | if(gMC->IsTrackStop()){ | |
1513 | gMC->TrackMomentum(p); | |
1514 | m = gMC->TrackMass(); | |
1515 | ekin = p[3]-m; | |
68ca986e | 1516 | hits[9] = ekin; |
1517 | hits[7] = 0.; | |
1518 | hits[8] = 0.; | |
1519 | AddHit(gAlice->CurrentTrack(), vol, hits); | |
1520 | } | |
1521 | else{ | |
1522 | hits[9] = destep; | |
1523 | hits[7] = 0.; | |
1524 | hits[8] = 0.; | |
1525 | AddHit(gAlice->CurrentTrack(), vol, hits); | |
1526 | } | |
a2216698 | 1527 | // printf(" Dep. E = %f \n",hits[9]); |
1528 | } | |
1529 | }// NB -> Questa parentesi (chiude il primo IF) io la sposterei al fondo!??? | |
68ca986e | 1530 | |
1531 | ||
1532 | // *** Light production in fibres | |
1533 | if((gMC->GetMedium() == fMedSensF1) || (gMC->GetMedium() == fMedSensF2)){ | |
68ca986e | 1534 | |
1535 | //Select charged particles | |
1536 | if((destep=gMC->Edep())){ | |
68ca986e | 1537 | |
1538 | // Particle velocity | |
1539 | gMC->TrackMomentum(p); | |
1540 | Float_t ptot=TMath::Sqrt(p[0]*p[0]+p[1]*p[1]+p[2]*p[2]); | |
1541 | Float_t beta = ptot/p[3]; | |
68ca986e | 1542 | if(beta<0.67) return; |
866ab5a2 | 1543 | if((beta>=0.67) && (beta<=0.75)) ibeta = 0; |
1544 | if((beta>0.75) && (beta<=0.85)) ibeta = 1; | |
1545 | if((beta>0.85) && (beta<=0.95)) ibeta = 2; | |
a2216698 | 1546 | if(beta>0.95) ibeta = 3; |
68ca986e | 1547 | |
1548 | // Angle between particle trajectory and fibre axis | |
1549 | // 1 -> Momentum directions | |
1550 | um[0] = p[0]/ptot; | |
1551 | um[1] = p[1]/ptot; | |
1552 | um[2] = p[2]/ptot; | |
1553 | gMC->Gmtod(um,ud,2); | |
1554 | // 2 -> Angle < limit angle | |
1555 | Double_t alfar = TMath::ACos(ud[2]); | |
1556 | Double_t alfa = alfar*kRaddeg; | |
866ab5a2 | 1557 | if(alfa>=110.) return; |
68ca986e | 1558 | ialfa = Int_t(1.+alfa/2.); |
1559 | ||
1560 | // Distance between particle trajectory and fibre axis | |
1561 | gMC->TrackPosition(s); | |
c0ceba4c | 1562 | for(j=0; j<=2; j++){ |
68ca986e | 1563 | x[j] = s[j]; |
1564 | } | |
1565 | gMC->Gmtod(x,xdet,1); | |
1566 | if(TMath::Abs(ud[0])>0.00001){ | |
1567 | Float_t dcoeff = ud[1]/ud[0]; | |
1568 | be = TMath::Abs((xdet[1]-dcoeff*xdet[0])/TMath::Sqrt(dcoeff*dcoeff+1.)); | |
1569 | } | |
1570 | else{ | |
1571 | be = TMath::Abs(ud[0]); | |
1572 | } | |
1573 | ||
1574 | if((vol[0]==1)) radius = fFibZN[1]; | |
1575 | if((vol[0]==2)) radius = fFibZP[1]; | |
1576 | ibe = Int_t(be*1000.+1); | |
1577 | ||
1578 | //Looking into the light tables | |
1579 | Float_t charge = gMC->TrackCharge(); | |
1580 | ||
1581 | // (1) ZN | |
1582 | if((vol[0]==1)) { | |
1583 | if(ibe>fNben) ibe=fNben; | |
1584 | out = charge*charge*fTablen[ibeta][ialfa][ibe]; | |
5ce39387 | 1585 | nphe = gRandom->Poisson(out); |
a2216698 | 1586 | // printf("ZN --- ibeta = %d, ialfa = %d, ibe = %d" |
1587 | // " -> out = %f, nphe = %d\n", ibeta, ialfa, ibe, out, nphe); | |
68ca986e | 1588 | if(gMC->GetMedium() == fMedSensF1){ |
5ce39387 | 1589 | hits[7] = nphe; //fLightPMQ |
68ca986e | 1590 | hits[8] = 0; |
1591 | hits[9] = 0; | |
1592 | AddHit(gAlice->CurrentTrack(), vol, hits); | |
1593 | } | |
1594 | else{ | |
1595 | hits[7] = 0; | |
5ce39387 | 1596 | hits[8] = nphe; //fLightPMC |
68ca986e | 1597 | hits[9] = 0; |
1598 | AddHit(gAlice->CurrentTrack(), vol, hits); | |
1599 | } | |
1600 | } | |
1601 | ||
1602 | // (2) ZP | |
1603 | if((vol[0]==2)) { | |
1604 | if(ibe>fNbep) ibe=fNbep; | |
1605 | out = charge*charge*fTablep[ibeta][ialfa][ibe]; | |
5ce39387 | 1606 | nphe = gRandom->Poisson(out); |
a2216698 | 1607 | // printf("ZP --- ibeta = %d, ialfa = %d, ibe = %d" |
1608 | // " -> out = %f, nphe = %d\n", ibeta, ialfa, ibe, out, nphe); | |
68ca986e | 1609 | if(gMC->GetMedium() == fMedSensF1){ |
5ce39387 | 1610 | hits[7] = nphe; //fLightPMQ |
68ca986e | 1611 | hits[8] = 0; |
1612 | hits[9] = 0; | |
1613 | AddHit(gAlice->CurrentTrack(), vol, hits); | |
1614 | } | |
1615 | else{ | |
1616 | hits[7] = 0; | |
5ce39387 | 1617 | hits[8] = nphe; //fLightPMC |
68ca986e | 1618 | hits[9] = 0; |
1619 | AddHit(gAlice->CurrentTrack(), vol, hits); | |
1620 | } | |
1621 | } | |
866ab5a2 | 1622 | // (3) ZEM |
1623 | if((vol[0]==3)) { | |
1624 | if(ibe>fNbep) ibe=fNbep; | |
1625 | out = charge*charge*fTablep[ibeta][ialfa][ibe]; | |
5ce39387 | 1626 | nphe = gRandom->Poisson(out); |
a2216698 | 1627 | // printf("ZEM --- ibeta = %d, ialfa = %d, ibe = %d" |
1628 | // " -> out = %f, nphe = %d\n", ibeta, ialfa, ibe, out, nphe); | |
0c9b76ab | 1629 | hits[7] = 0; |
1630 | hits[8] = nphe; //fLightPMC | |
5ce39387 | 1631 | hits[9] = 0; |
1632 | AddHit(gAlice->CurrentTrack(), vol, hits); | |
a2216698 | 1633 | } |
68ca986e | 1634 | } |
68ca986e | 1635 | } |
1636 | } |