| dfef1a15 |
1 | /************************************************************************** |
| 2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * |
| 3 | * * |
| 4 | * Author: The ALICE Off-line Project. * |
| 5 | * Contributors are mentioned in the code where appropriate. * |
| 6 | * * |
| 7 | * Permission to use, copy, modify and distribute this software and its * |
| 8 | * documentation strictly for non-commercial purposes is hereby granted * |
| 9 | * without fee, provided that the above copyright notice appears in all * |
| 10 | * copies and that both the copyright notice and this permission notice * |
| 11 | * appear in the supporting documentation. The authors make no claims * |
| 12 | * about the suitability of this software for any purpose. It is * |
| 13 | * provided "as is" without express or implied warranty. * |
| 14 | **************************************************************************/ |
| 15 | |
| 16 | /* |
| 17 | $Log$ |
| 3c5f55bc |
18 | Revision 1.10 2007/10/07 19:40:46 decaro |
| 19 | right handling of l2t matrices and alignable entries in case of TOF staging geometry |
| 20 | |
| 19dd44a6 |
21 | Revision 1.9 2007/10/07 19:36:29 decaro |
| 22 | TOF materials and volumes description: update |
| 23 | |
| 57df6e96 |
24 | Revision 1.8 2007/10/04 13:15:37 arcelli |
| 25 | updates to comply with AliTOFGeometryV5 becoming AliTOFGeometry |
| 26 | |
| ba66add8 |
27 | Revision 1.7 2007/10/03 18:07:26 arcelli |
| 28 | right handling of l2t matrices and alignable entries in case of TOF holes (Annalisa) |
| 29 | |
| da79abb0 |
30 | Revision 1.6 2007/10/03 10:41:16 arcelli |
| 31 | adding tracking-to-local matrices for new AliTOFcluster |
| 32 | |
| ce352d73 |
33 | Revision 1.5 2007/07/27 08:14:48 morsch |
| 34 | Write all track references into the same branch. |
| 35 | |
| e6add757 |
36 | Revision 1.4 2007/05/29 16:51:05 decaro |
| 37 | Update of the front-end electronics and cooling system description |
| 38 | |
| 9f8488c2 |
39 | Revision 1.3.2 2007/05/29 decaro |
| 40 | FEA+cooling zone description: update |
| 41 | FEA+cooling orientation (side A/ side C) -> correction |
| 42 | Revision 1.3.1 2007/05/24 decaro |
| 43 | Change the FEA+cooling zone description: |
| 44 | - FCA1/FCA2, air boxes, contain: |
| 45 | FFEA volume, G10 box, |
| 46 | FAL1/FAL2/FAL3 volumes, aluminium boxes; |
| 47 | - FRO1/FRO2/FRO3/FRO4/FBAR, aluminum boxes; |
| 48 | - changed FTUB positions; |
| 49 | |
| 50 | Revision 1.3 2007/05/04 14:05:42 decaro |
| 51 | Ineffective comment cleanup |
| 52 | |
| e41ca6a9 |
53 | Revision 1.2 2007/05/04 12:59:22 arcelli |
| 54 | Change the TOF SM paths for misalignment (one layer up) |
| 55 | |
| 6e2570fc |
56 | Revision 1.1 2007/05/02 17:32:58 decaro |
| 57 | TOF geometry description as installed (G. Cara Romeo, A. De Caro) |
| 58 | |
| dfef1a15 |
59 | Revision 0.1 2007 March G. Cara Romeo and A. De Caro |
| 60 | Implemented a more realistic TOF geometry description, |
| 61 | in terms of: |
| 62 | - material badget, |
| 63 | - services and front end electronics description, |
| 64 | - TOF crate readout modules |
| 65 | (added volume FTOS in ALIC_1/BBMO_1/BBCE_%i -for i=1,...,18-, |
| 66 | and in ALIC_1/BFMO_%i -for i=19,...,36- volumes) |
| 67 | As the 5th version in terms of geometrical positioning of volumes. |
| 68 | |
| 69 | */ |
| 70 | |
| 71 | /////////////////////////////////////////////////////////////////////////////// |
| 72 | // // |
| 73 | // This class contains the functions for version 6 of the Time Of Flight // |
| 74 | // detector. // |
| 75 | // // |
| 76 | // VERSION WITH 6 MODULES AND TILTED STRIPS // |
| 77 | // // |
| 78 | // FULL COVERAGE VERSION + OPTION for PHOS holes // |
| 79 | // // |
| 80 | // // |
| 81 | //Begin_Html // |
| 82 | /* // |
| 83 | <img src="picts/AliTOFv6T0Class.gif"> // |
| 84 | */ // |
| 85 | //End_Html // |
| 86 | // // |
| 87 | /////////////////////////////////////////////////////////////////////////////// |
| 88 | |
| 89 | #include "TBRIK.h" |
| 90 | #include "TGeometry.h" |
| 91 | #include "TLorentzVector.h" |
| 92 | #include "TNode.h" |
| 93 | #include "TVirtualMC.h" |
| 94 | #include "TGeoManager.h" |
| ce352d73 |
95 | #include <TGeoMatrix.h> |
| 96 | #include <TGeoPhysicalNode.h> |
| 97 | #include <TGeoVolume.h> |
| dfef1a15 |
98 | |
| 99 | #include "AliConst.h" |
| 100 | #include "AliLog.h" |
| 101 | #include "AliMagF.h" |
| 102 | #include "AliMC.h" |
| 103 | #include "AliRun.h" |
| e6add757 |
104 | #include "AliTrackReference.h" |
| dfef1a15 |
105 | |
| 106 | #include "AliTOFGeometry.h" |
| dfef1a15 |
107 | #include "AliTOFv6T0.h" |
| 108 | |
| 109 | extern TDirectory *gDirectory; |
| 110 | extern TVirtualMC *gMC; |
| 111 | extern TGeoManager *gGeoManager; |
| 112 | |
| 113 | extern AliRun *gAlice; |
| 114 | |
| 115 | ClassImp(AliTOFv6T0) |
| 116 | |
| 57df6e96 |
117 | const Float_t AliTOFv6T0::fgkModuleWallThickness = 0.33; // cm |
| 118 | const Float_t AliTOFv6T0::fgkInterCentrModBorder1 = 49.5 ; // cm |
| 119 | const Float_t AliTOFv6T0::fgkInterCentrModBorder2 = 57.5 ; // cm |
| 120 | const Float_t AliTOFv6T0::fgkExterInterModBorder1 = 196.0 ; // cm |
| 121 | const Float_t AliTOFv6T0::fgkExterInterModBorder2 = 203.5 ; // cm |
| 122 | const Float_t AliTOFv6T0::fgkLengthInCeModBorder = 4.7 ; // cm |
| 123 | const Float_t AliTOFv6T0::fgkLengthExInModBorder = 7.0 ; // cm |
| 124 | const Float_t AliTOFv6T0::fgkModuleCoverThickness = 2.0 ; // cm |
| 125 | const Float_t AliTOFv6T0::fgkFEAwidth1 = 19.0; // cm |
| 126 | const Float_t AliTOFv6T0::fgkFEAwidth2 = 38.5; // cm |
| 127 | const Float_t AliTOFv6T0::fgkSawThickness = 1.0; // cm |
| 128 | const Float_t AliTOFv6T0::fgkCBLw = 13.5; // cm |
| 129 | const Float_t AliTOFv6T0::fgkCBLh1 = 2.0; // cm |
| 130 | const Float_t AliTOFv6T0::fgkCBLh2 = 12.3; // cm |
| 131 | |
| dfef1a15 |
132 | //_____________________________________________________________________________ |
| 133 | AliTOFv6T0::AliTOFv6T0(): |
| 134 | fIdFTOA(-1), |
| 135 | fIdFTOB(-1), |
| 136 | fIdFTOC(-1), |
| 137 | fIdFLTA(-1), |
| 138 | fIdFLTB(-1), |
| 139 | fIdFLTC(-1), |
| 140 | fTOFHoles(kFALSE) |
| 141 | { |
| 142 | // |
| 143 | // Default constructor |
| 144 | // |
| 145 | } |
| 146 | |
| 147 | //_____________________________________________________________________________ |
| 148 | AliTOFv6T0::AliTOFv6T0(const char *name, const char *title): |
| 149 | AliTOF(name,title,"tzero"), |
| 150 | fIdFTOA(-1), |
| 151 | fIdFTOB(-1), |
| 152 | fIdFTOC(-1), |
| 153 | fIdFLTA(-1), |
| 154 | fIdFLTB(-1), |
| 155 | fIdFLTC(-1), |
| 156 | fTOFHoles(kFALSE) |
| 157 | { |
| 158 | // |
| 159 | // Standard constructor |
| 160 | // |
| 161 | // |
| 162 | // Check that FRAME is there otherwise we have no place where to |
| 163 | // put TOF |
| 164 | |
| 165 | |
| 166 | AliModule* frame = (AliModule*)gAlice->GetModule("FRAME"); |
| 167 | if(!frame) { |
| 168 | AliFatal("TOF needs FRAME to be present"); |
| 169 | } else{ |
| 170 | |
| 171 | if (fTOFGeometry) delete fTOFGeometry; |
| ba66add8 |
172 | fTOFGeometry = new AliTOFGeometry(); |
| dfef1a15 |
173 | |
| 174 | if(frame->IsVersion()==1) { |
| 175 | AliDebug(1,Form("Frame version %d", frame->IsVersion())); |
| 176 | AliDebug(1,"Full Coverage for TOF"); |
| 177 | fTOFHoles=false;} |
| 178 | else { |
| 179 | AliDebug(1,Form("Frame version %d", frame->IsVersion())); |
| 180 | AliDebug(1,"TOF with Holes for PHOS"); |
| 181 | fTOFHoles=true;} |
| 182 | } |
| 183 | fTOFGeometry->SetHoles(fTOFHoles); |
| 184 | |
| 185 | //AliTOF::fTOFGeometry = fTOFGeometry; |
| 186 | |
| 187 | // Save the geometry |
| 188 | TDirectory* saveDir = gDirectory; |
| 189 | gAlice->GetRunLoader()->CdGAFile(); |
| 190 | fTOFGeometry->Write("TOFgeometry"); |
| 191 | saveDir->cd(); |
| 192 | |
| 193 | } |
| 194 | |
| 195 | //_____________________________________________________________________________ |
| 196 | void AliTOFv6T0::AddAlignableVolumes() const |
| 197 | { |
| 198 | // |
| 199 | // Create entries for alignable volumes associating the symbolic volume |
| 200 | // name with the corresponding volume path. Needs to be syncronized with |
| 201 | // eventual changes in the geometry. |
| 202 | // |
| 203 | |
| 204 | TString volPath; |
| 205 | TString symName; |
| 206 | |
| 207 | TString vpL0 = "ALIC_1/B077_1/BSEGMO"; |
| 208 | TString vpL1 = "_1/BTOF"; |
| 209 | TString vpL2 = "_1"; |
| 210 | TString vpL3 = "/FTOA_0"; |
| 211 | TString vpL4 = "/FLTA_0/FSTR_"; |
| 212 | |
| 213 | TString snSM = "TOF/sm"; |
| 214 | TString snSTRIP = "/strip"; |
| 215 | |
| 216 | Int_t nSectors=fTOFGeometry->NSectors(); |
| 217 | Int_t nStrips =fTOFGeometry->NStripA()+ |
| 218 | 2*fTOFGeometry->NStripB()+ |
| 219 | 2*fTOFGeometry->NStripC(); |
| 220 | |
| 221 | // |
| 222 | // The TOF MRPC Strips |
| 223 | // The symbolic names are: TOF/sm00/strip01 |
| 224 | // ... |
| 225 | // TOF/sm17/strip91 |
| 226 | |
| 227 | Int_t imod=0; |
| 228 | |
| 229 | for (Int_t isect = 0; isect < nSectors; isect++) { |
| 230 | for (Int_t istr = 1; istr <= nStrips; istr++) { |
| da79abb0 |
231 | |
| 3c5f55bc |
232 | //if (fTOFSectors[isect]==-1) continue; |
| 19dd44a6 |
233 | |
| 3c5f55bc |
234 | if (fTOFHoles && (isect==13 || isect==14 || isect==15)) { |
| da79abb0 |
235 | if (istr<39) { |
| 236 | vpL3 = "/FTOB_0"; |
| 237 | vpL4 = "/FLTB_0/FSTR_"; |
| 238 | } |
| 239 | else if (istr>53) { |
| 240 | vpL3 = "/FTOC_0"; |
| 241 | vpL4 = "/FLTC_0/FSTR_"; |
| 242 | } |
| 243 | else continue; |
| 244 | } |
| 245 | else { |
| 246 | vpL3 = "/FTOA_0"; |
| 247 | vpL4 = "/FLTA_0/FSTR_"; |
| 248 | } |
| 249 | |
| dfef1a15 |
250 | volPath = vpL0; |
| 251 | volPath += isect; |
| 252 | volPath += vpL1; |
| 253 | volPath += isect; |
| 254 | volPath += vpL2; |
| 255 | volPath += vpL3; |
| 256 | volPath += vpL4; |
| 257 | volPath += istr; |
| 258 | |
| 259 | |
| 260 | symName = snSM; |
| 261 | symName += Form("%02d",isect); |
| 262 | symName += snSTRIP; |
| 263 | symName += Form("%02d",istr); |
| 264 | |
| 265 | AliDebug(2,"--------------------------------------------"); |
| 266 | AliDebug(2,Form("Alignable object %d", imod)); |
| 267 | AliDebug(2,Form("volPath=%s\n",volPath.Data())); |
| 268 | AliDebug(2,Form("symName=%s\n",symName.Data())); |
| 269 | AliDebug(2,"--------------------------------------------"); |
| 270 | |
| 271 | gGeoManager->SetAlignableEntry(symName.Data(),volPath.Data()); |
| ce352d73 |
272 | |
| 273 | //T2L matrices for alignment |
| 274 | TGeoPNEntry *e = gGeoManager->GetAlignableEntry(symName.Data()); |
| 275 | if (e) { |
| 276 | const char *path = e->GetTitle(); |
| 277 | if (!gGeoManager->cd(path)) { |
| 278 | AliFatal(Form("Volume path %s not valid!",path)); |
| 279 | } |
| 280 | TGeoHMatrix *globMatrix = gGeoManager->GetCurrentMatrix(); |
| 281 | Double_t phi = 20.0 * (isect % 18) + 10.0; |
| 282 | TGeoHMatrix *t2l = new TGeoHMatrix(); |
| 283 | t2l->RotateZ(phi); |
| 284 | t2l->MultiplyLeft(&(globMatrix->Inverse())); |
| 285 | e->SetMatrix(t2l); |
| 286 | } |
| 287 | else { |
| 288 | AliError(Form("Alignable entry %s is not valid!",symName.Data())); |
| 289 | } |
| 290 | |
| dfef1a15 |
291 | imod++; |
| 292 | } |
| 293 | } |
| 294 | |
| 295 | |
| 296 | // |
| 297 | // The TOF supermodules |
| 298 | // The symbolic names are: TOF/sm00 |
| 299 | // ... |
| 300 | // TOF/sm17 |
| 301 | // |
| 302 | for (Int_t isect = 0; isect < nSectors; isect++) { |
| 303 | |
| 304 | volPath = vpL0; |
| 305 | volPath += isect; |
| 306 | volPath += vpL1; |
| 307 | volPath += isect; |
| 308 | volPath += vpL2; |
| dfef1a15 |
309 | |
| 310 | symName = snSM; |
| 311 | symName += Form("%02d",isect); |
| 312 | |
| 313 | AliDebug(2,"--------------------------------------------"); |
| 314 | AliDebug(2,Form("Alignable object %d", isect+imod)); |
| 315 | AliDebug(2,Form("volPath=%s\n",volPath.Data())); |
| 316 | AliDebug(2,Form("symName=%s\n",symName.Data())); |
| 317 | AliDebug(2,"--------------------------------------------"); |
| 318 | |
| 319 | gGeoManager->SetAlignableEntry(symName.Data(),volPath.Data()); |
| 320 | |
| 321 | } |
| 322 | |
| 323 | } |
| 324 | //____________________________________________________________________________ |
| 325 | void AliTOFv6T0::BuildGeometry() |
| 326 | { |
| 327 | // |
| 328 | // Build TOF ROOT geometry for the ALICE event display |
| 329 | // |
| 330 | TNode *node, *top; |
| 331 | const int kColorTOF = 27; |
| 332 | |
| 333 | TGeometry *globalGeometry = (TGeometry*)gAlice->GetGeometry(); |
| 334 | |
| 335 | // Find top TNODE |
| 336 | top = globalGeometry->GetNode("alice"); |
| 337 | |
| 338 | // Position the different copies |
| 339 | const Float_t krTof =(fTOFGeometry->Rmax()+fTOFGeometry->Rmin())/2.; |
| 340 | const Float_t khTof = fTOFGeometry->Rmax()-fTOFGeometry->Rmin(); |
| 341 | const Int_t kNTof = fTOFGeometry->NSectors(); |
| 342 | const Float_t kangle = k2PI/kNTof; |
| 343 | |
| 57df6e96 |
344 | //const Float_t fgkInterCentrModBorder1 = 49.5; |
| 345 | //const Float_t fgkInterCentrModBorder2 = 57.5; |
| dfef1a15 |
346 | |
| 347 | Float_t ang; |
| 348 | |
| 349 | // define offset for nodes |
| 57df6e96 |
350 | Float_t zOffsetB = (fTOFGeometry->ZlenA()*0.5 + (fgkInterCentrModBorder1+fgkInterCentrModBorder2)*0.5)*0.5; |
| dfef1a15 |
351 | Float_t zOffsetA = 0.; |
| 352 | // Define TOF basic volume |
| 353 | |
| 354 | char nodeName0[16], nodeName1[16], nodeName2[16]; |
| 355 | char nodeName3[16], nodeName4[16], rotMatNum[16]; |
| 356 | |
| 357 | if (fTOFHoles) { |
| 358 | new TBRIK("S_TOF_B","TOF box","void", |
| 359 | fTOFGeometry->StripLength()*0.5, khTof*0.5, fTOFGeometry->ZlenB()*0.5); |
| 360 | new TBRIK("S_TOF_C","TOF box","void", |
| 361 | fTOFGeometry->StripLength()*0.5, khTof*0.5, fTOFGeometry->ZlenB()*0.5); |
| 362 | } |
| 363 | new TBRIK("S_TOF_A","TOF box","void", |
| 364 | fTOFGeometry->StripLength()*0.5, khTof*0.5, fTOFGeometry->ZlenA()*0.5); |
| 365 | |
| 366 | for (Int_t nodeNum=1;nodeNum<kNTof+1;nodeNum++){ |
| 367 | |
| 368 | if (nodeNum<10) { |
| 369 | sprintf(rotMatNum,"rot50%i",nodeNum); |
| 370 | sprintf(nodeName0,"FTO00%i",nodeNum); |
| 371 | sprintf(nodeName1,"FTO10%i",nodeNum); |
| 372 | sprintf(nodeName2,"FTO20%i",nodeNum); |
| 373 | sprintf(nodeName3,"FTO30%i",nodeNum); |
| 374 | sprintf(nodeName4,"FTO40%i",nodeNum); |
| 375 | } |
| 376 | if (nodeNum>9) { |
| 377 | sprintf(rotMatNum,"rot5%i",nodeNum); |
| 378 | sprintf(nodeName0,"FTO0%i",nodeNum); |
| 379 | sprintf(nodeName1,"FTO1%i",nodeNum); |
| 380 | sprintf(nodeName2,"FTO2%i",nodeNum); |
| 381 | sprintf(nodeName3,"FTO3%i",nodeNum); |
| 382 | sprintf(nodeName4,"FTO4%i",nodeNum); |
| 383 | } |
| 384 | |
| 385 | new TRotMatrix(rotMatNum,rotMatNum,90,-20*nodeNum,90,90-20*nodeNum,0,0); |
| 386 | ang = (4.5-nodeNum) * kangle; |
| 387 | |
| 388 | if (fTOFHoles) { |
| 389 | top->cd(); |
| 390 | node = new TNode(nodeName2,nodeName2,"S_TOF_B", krTof*TMath::Cos(ang), krTof*TMath::Sin(ang), zOffsetB,rotMatNum); |
| 391 | node->SetLineColor(kColorTOF); |
| 392 | fNodes->Add(node); |
| 393 | |
| 394 | top->cd(); |
| 395 | node = new TNode(nodeName3,nodeName3,"S_TOF_C", krTof*TMath::Cos(ang), krTof*TMath::Sin(ang),-zOffsetB,rotMatNum); |
| 396 | node->SetLineColor(kColorTOF); |
| 397 | fNodes->Add(node); |
| 398 | } |
| 399 | |
| 400 | top->cd(); |
| 401 | node = new TNode(nodeName4,nodeName4,"S_TOF_A", krTof*TMath::Cos(ang), krTof*TMath::Sin(ang), zOffsetA,rotMatNum); |
| 402 | node->SetLineColor(kColorTOF); |
| 403 | fNodes->Add(node); |
| 404 | } // end loop on nodeNum |
| 405 | |
| 406 | } |
| 407 | |
| 408 | //_____________________________________________________________________________ |
| 409 | void AliTOFv6T0::CreateGeometry() |
| 410 | { |
| 411 | // |
| 412 | // Create geometry for Time Of Flight version 0 |
| 413 | // |
| 414 | //Begin_Html |
| 415 | /* |
| 416 | <img src="picts/AliTOFv6T0.gif"> |
| 417 | */ |
| 418 | //End_Html |
| 419 | // |
| 420 | // Creates common geometry |
| 421 | // |
| 422 | AliTOF::CreateGeometry(); |
| 423 | } |
| 424 | |
| 425 | |
| 426 | //_____________________________________________________________________________ |
| 427 | void AliTOFv6T0::TOFpc(Float_t xtof, Float_t ytof, Float_t zlenA) |
| 428 | { |
| 429 | // |
| 430 | // Definition of the Time Of Fligh Resistive Plate Chambers |
| 431 | // |
| 432 | |
| dfef1a15 |
433 | // module wall thickness (cm) |
| 57df6e96 |
434 | //const Float_t fgkModuleWallThickness = 0.33; |
| dfef1a15 |
435 | |
| 436 | AliDebug(1, "************************* TOF geometry **************************"); |
| 437 | AliDebug(1,Form(" xtof %d", xtof)); |
| 438 | AliDebug(1,Form(" ytof %d", ytof)); |
| 439 | AliDebug(1,Form(" zlenA %d", zlenA)); |
| 440 | AliDebug(2,Form(" zlenA*0.5 = %d", zlenA*0.5)); |
| 57df6e96 |
441 | |
| 442 | Float_t xFLT, yFLT, zFLTA; |
| 443 | xFLT = xtof - 2.*fgkModuleWallThickness; |
| 444 | yFLT = ytof*0.5 - fgkModuleWallThickness; |
| 445 | zFLTA = zlenA - 2.*fgkModuleWallThickness; |
| 446 | |
| 447 | CreateModules(xtof, ytof, zlenA, xFLT, yFLT, zFLTA); |
| 448 | MakeStripsInModules(ytof, zlenA); |
| 449 | |
| 450 | CreateModuleCovers(xtof, zlenA); |
| 451 | |
| 452 | CreateBackZone(xtof, ytof, zlenA); |
| 453 | MakeFrontEndElectronics(); |
| 454 | MakeFEACooling(xtof, ytof, zlenA); |
| 455 | MakeNinoMask(xtof, ytof, zlenA); |
| 456 | MakeSuperModuleCooling(xtof, ytof, zlenA); |
| 457 | MakeSuperModuleServices(xtof, ytof, zlenA); |
| 458 | |
| 459 | MakeModulesInBTOFvolumes(ytof, zlenA); |
| 460 | MakeCoversInBTOFvolumes(); |
| 461 | MakeBackInBTOFvolumes(ytof); |
| 462 | |
| 463 | MakeReadoutCrates(ytof); |
| 464 | |
| 465 | } |
| 466 | |
| 467 | //_____________________________________________________________________________ |
| 468 | void AliTOFv6T0::CreateModules(Float_t xtof, Float_t ytof, Float_t zlenA, |
| 469 | Float_t xFLT, Float_t yFLT, Float_t zFLTA) const |
| 470 | { |
| 471 | // |
| 472 | // Create supermodule volume |
| 473 | // and wall volumes to separate 5 modules |
| 474 | // |
| 475 | |
| 476 | const Float_t kPi = TMath::Pi(); |
| 477 | |
| 478 | //const Float_t fgkInterCentrModBorder1 = 49.5; |
| 479 | //const Float_t fgkInterCentrModBorder2 = 57.5; |
| 480 | //const Float_t fgkExterInterModBorder1 = 196.0; |
| 481 | //const Float_t fgkExterInterModBorder2 = 203.5; |
| 482 | |
| 483 | //const Float_t fgkLengthExInModBorder = 4.7; |
| 484 | //const Float_t fgkLengthInCeModBorder = 7.0; |
| 485 | |
| 486 | // module wall thickness (cm) |
| 487 | //const Float_t fgkModuleWallThickness = 0.33; |
| 488 | |
| dfef1a15 |
489 | // Definition of the of fibre glass modules (FTOA, FTOB and FTOC) |
| dfef1a15 |
490 | |
| 57df6e96 |
491 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 492 | |
| 493 | Int_t idrotm[8]; |
| 494 | |
| 495 | Float_t par[3]; |
| dfef1a15 |
496 | par[0] = xtof * 0.5; |
| 497 | par[1] = ytof * 0.25; |
| 498 | par[2] = zlenA * 0.5; |
| 57df6e96 |
499 | gMC->Gsvolu("FTOA", "BOX ", idtmed[503], par, 3); // Fibre glass |
| 500 | |
| dfef1a15 |
501 | if (fTOFHoles) { |
| 502 | par[0] = xtof * 0.5; |
| 503 | par[1] = ytof * 0.25; |
| 57df6e96 |
504 | par[2] = (zlenA*0.5 - fgkInterCentrModBorder1)*0.5; |
| 505 | gMC->Gsvolu("FTOB", "BOX ", idtmed[503], par, 3); // Fibre glass |
| 506 | gMC->Gsvolu("FTOC", "BOX ", idtmed[503], par, 3); // Fibre glass |
| dfef1a15 |
507 | } |
| 508 | |
| dfef1a15 |
509 | |
| 510 | // Definition and positioning |
| 511 | // of the not sensitive volumes with Insensitive Freon (FLTA, FLTB and FLTC) |
| 512 | |
| dfef1a15 |
513 | par[0] = xFLT*0.5; |
| 514 | par[1] = yFLT*0.5; |
| 515 | par[2] = zFLTA*0.5; |
| 57df6e96 |
516 | gMC->Gsvolu("FLTA", "BOX ", idtmed[506], par, 3); // Freon mix |
| dfef1a15 |
517 | |
| 57df6e96 |
518 | Float_t xcoor, ycoor, zcoor; |
| dfef1a15 |
519 | xcoor = 0.; |
| 57df6e96 |
520 | ycoor = fgkModuleWallThickness*0.5; |
| dfef1a15 |
521 | zcoor = 0.; |
| 522 | gMC->Gspos ("FLTA", 0, "FTOA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 523 | |
| 524 | if (fTOFHoles) { |
| 57df6e96 |
525 | par[2] = (zlenA*0.5 - 2.*fgkModuleWallThickness - fgkInterCentrModBorder1)*0.5; |
| 526 | gMC->Gsvolu("FLTB", "BOX ", idtmed[506], par, 3); // Freon mix |
| 527 | gMC->Gsvolu("FLTC", "BOX ", idtmed[506], par, 3); // Freon mix |
| dfef1a15 |
528 | |
| 529 | //xcoor = 0.; |
| 57df6e96 |
530 | //ycoor = fgkModuleWallThickness*0.5; |
| 531 | zcoor = fgkModuleWallThickness; |
| dfef1a15 |
532 | gMC->Gspos ("FLTB", 0, "FTOB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 57df6e96 |
533 | gMC->Gspos ("FLTC", 0, "FTOC", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| dfef1a15 |
534 | } |
| 535 | |
| dfef1a15 |
536 | // Definition and positioning |
| 537 | // of the fibre glass walls between central and intermediate modules (FWZ1 and FWZ2) |
| 538 | |
| 57df6e96 |
539 | Float_t alpha, tgal, beta, tgbe, trpa[11]; |
| 540 | tgal = (yFLT - 2.*fgkLengthInCeModBorder)/(fgkInterCentrModBorder2 - fgkInterCentrModBorder1); |
| dfef1a15 |
541 | alpha = TMath::ATan(tgal); |
| 57df6e96 |
542 | beta = (kPi*0.5 - alpha)*0.5; |
| 543 | tgbe = TMath::Tan(beta); |
| dfef1a15 |
544 | trpa[0] = xFLT*0.5; |
| 545 | trpa[1] = 0.; |
| 546 | trpa[2] = 0.; |
| 57df6e96 |
547 | trpa[3] = 2.*fgkModuleWallThickness; |
| 548 | trpa[4] = (fgkLengthInCeModBorder - 2.*fgkModuleWallThickness*tgbe)*0.5; |
| 549 | trpa[5] = (fgkLengthInCeModBorder + 2.*fgkModuleWallThickness*tgbe)*0.5; |
| dfef1a15 |
550 | trpa[6] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; |
| 57df6e96 |
551 | trpa[7] = 2.*fgkModuleWallThickness; |
| 552 | trpa[8] = (fgkLengthInCeModBorder - 2.*fgkModuleWallThickness*tgbe)*0.5; |
| 553 | trpa[9] = (fgkLengthInCeModBorder + 2.*fgkModuleWallThickness*tgbe)*0.5; |
| dfef1a15 |
554 | trpa[10] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; |
| 57df6e96 |
555 | gMC->Gsvolu("FWZ1","TRAP", idtmed[503], trpa, 11); // Fibre glass |
| dfef1a15 |
556 | |
| 57df6e96 |
557 | AliMatrix (idrotm[0],90., 90.,180.,0.,90.,180.); |
| 558 | AliMatrix (idrotm[1],90., 90., 0.,0.,90., 0.); |
| dfef1a15 |
559 | |
| 57df6e96 |
560 | //xcoor = 0.; |
| 561 | ycoor = -(yFLT - fgkLengthInCeModBorder)*0.5; |
| 562 | zcoor = fgkInterCentrModBorder1; |
| 563 | gMC->Gspos("FWZ1", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[0],"ONLY"); |
| 564 | gMC->Gspos("FWZ1", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[1],"ONLY"); |
| 565 | |
| 566 | Float_t y0B, ycoorB, zcoorB; |
| 567 | |
| 568 | if (fTOFHoles) { |
| 569 | y0B = fgkLengthInCeModBorder - fgkModuleWallThickness*tgbe; |
| 570 | trpa[0] = xFLT*0.5; |
| 571 | trpa[1] = 0.; |
| 572 | trpa[2] = 0.; |
| 573 | trpa[3] = fgkModuleWallThickness; |
| 574 | trpa[4] = (y0B - fgkModuleWallThickness*tgbe)*0.5; |
| 575 | trpa[5] = (y0B + fgkModuleWallThickness*tgbe)*0.5; |
| 576 | trpa[6] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; |
| 577 | trpa[7] = fgkModuleWallThickness; |
| 578 | trpa[8] = (y0B - fgkModuleWallThickness*tgbe)*0.5; |
| 579 | trpa[9] = (y0B + fgkModuleWallThickness*tgbe)*0.5; |
| 580 | trpa[10] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; |
| 581 | //xcoor = 0.; |
| 582 | ycoorB = ycoor - fgkModuleWallThickness*0.5*tgbe; |
| 583 | zcoorB = (zlenA*0.5 - 2.*fgkModuleWallThickness - fgkInterCentrModBorder1)*0.5 - 2.*fgkModuleWallThickness; |
| 584 | gMC->Gsvolu("FWZA","TRAP", idtmed[503], trpa, 11); // Fibre glass |
| 585 | gMC->Gspos("FWZA", 1,"FLTB", xcoor, ycoorB, zcoorB,idrotm[1],"ONLY"); |
| 586 | gMC->Gspos("FWZA", 2,"FLTC", xcoor, ycoorB,-zcoorB,idrotm[0],"ONLY"); |
| 587 | } |
| dfef1a15 |
588 | |
| 589 | AliMatrix (idrotm[2],90.,270., 0.,0.,90.,180.); |
| 57df6e96 |
590 | AliMatrix (idrotm[3],90.,270.,180.,0.,90., 0.); |
| dfef1a15 |
591 | |
| 57df6e96 |
592 | //xcoor = 0.; |
| 593 | ycoor = (yFLT - fgkLengthInCeModBorder)*0.5; |
| 594 | zcoor = fgkInterCentrModBorder2; |
| dfef1a15 |
595 | gMC->Gspos("FWZ1", 3,"FLTA", xcoor, ycoor, zcoor,idrotm[2],"ONLY"); |
| 57df6e96 |
596 | gMC->Gspos("FWZ1", 4,"FLTA", xcoor, ycoor,-zcoor,idrotm[3],"ONLY"); |
| 597 | |
| 598 | if (fTOFHoles) { |
| 599 | y0B = fgkLengthInCeModBorder + fgkModuleWallThickness*tgbe; |
| 600 | trpa[0] = xFLT*0.5; |
| 601 | trpa[1] = 0.; |
| 602 | trpa[2] = 0.; |
| 603 | trpa[3] = fgkModuleWallThickness; |
| 604 | trpa[4] = (y0B - fgkModuleWallThickness*tgbe)*0.5; |
| 605 | trpa[5] = (y0B + fgkModuleWallThickness*tgbe)*0.5; |
| 606 | trpa[6] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; |
| 607 | trpa[7] = fgkModuleWallThickness; |
| 608 | trpa[8] = (y0B - fgkModuleWallThickness*tgbe)*0.5; |
| 609 | trpa[9] = (y0B + fgkModuleWallThickness*tgbe)*0.5; |
| 610 | trpa[10] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; |
| 611 | gMC->Gsvolu("FWZB","TRAP", idtmed[503], trpa, 11); // Fibre glass |
| 612 | //xcoor = 0.; |
| 613 | ycoorB = ycoor - fgkModuleWallThickness*0.5*tgbe; |
| 614 | zcoorB = (zlenA*0.5 - 2.*fgkModuleWallThickness - fgkInterCentrModBorder1)*0.5 - |
| 615 | (fgkInterCentrModBorder2 - fgkInterCentrModBorder1) - 2.*fgkModuleWallThickness; |
| 616 | gMC->Gspos("FWZB", 1,"FLTB", xcoor, ycoorB, zcoorB,idrotm[3],"ONLY"); |
| 617 | gMC->Gspos("FWZB", 2,"FLTC", xcoor, ycoorB,-zcoorB,idrotm[2],"ONLY"); |
| 618 | } |
| dfef1a15 |
619 | |
| 57df6e96 |
620 | trpa[0] = 0.5*(fgkInterCentrModBorder2 - fgkInterCentrModBorder1)/TMath::Cos(alpha); |
| 621 | trpa[1] = 2.*fgkModuleWallThickness; |
| dfef1a15 |
622 | trpa[2] = xFLT*0.5; |
| 623 | trpa[3] = -beta*kRaddeg; |
| 624 | trpa[4] = 0.; |
| 625 | trpa[5] = 0.; |
| 57df6e96 |
626 | gMC->Gsvolu("FWZ2","PARA", idtmed[503], trpa, 6); // Fibre glass |
| dfef1a15 |
627 | |
| 57df6e96 |
628 | AliMatrix (idrotm[4], alpha*kRaddeg,90.,90.+alpha*kRaddeg,90.,90.,180.); |
| 629 | AliMatrix (idrotm[5],180.-alpha*kRaddeg,90.,90.-alpha*kRaddeg,90.,90., 0.); |
| dfef1a15 |
630 | |
| 57df6e96 |
631 | //xcoor = 0.; |
| dfef1a15 |
632 | ycoor = 0.; |
| 57df6e96 |
633 | zcoor = (fgkInterCentrModBorder2 + fgkInterCentrModBorder1)*0.5; |
| 634 | gMC->Gspos("FWZ2", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[4],"ONLY"); |
| 635 | gMC->Gspos("FWZ2", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[5],"ONLY"); |
| 636 | |
| 637 | if (fTOFHoles) { |
| 638 | trpa[0] = 0.5*(fgkInterCentrModBorder2 - fgkInterCentrModBorder1)/TMath::Cos(alpha); |
| 639 | trpa[1] = fgkModuleWallThickness; |
| 640 | trpa[2] = xFLT*0.5; |
| 641 | trpa[3] = -beta*kRaddeg; |
| 642 | trpa[4] = 0.; |
| 643 | trpa[5] = 0.; |
| 644 | gMC->Gsvolu("FWZC","PARA", idtmed[503], trpa, 6); // Fibre glass |
| 645 | //xcoor = 0.; |
| 646 | ycoorB = ycoor - fgkModuleWallThickness*tgbe; |
| 647 | zcoorB = (zlenA*0.5 - 2.*fgkModuleWallThickness - fgkInterCentrModBorder1)*0.5 - |
| 648 | (fgkInterCentrModBorder2 - fgkInterCentrModBorder1)*0.5 - 2.*fgkModuleWallThickness; |
| 649 | gMC->Gspos("FWZC", 1,"FLTB", xcoor, ycoorB, zcoorB, idrotm[5],"ONLY"); |
| 650 | gMC->Gspos("FWZC", 2,"FLTC", xcoor, ycoorB,-zcoorB, idrotm[4],"ONLY"); |
| 651 | } |
| 652 | |
| dfef1a15 |
653 | |
| 654 | // Definition and positioning |
| 655 | // of the fibre glass walls between intermediate and lateral modules (FWZ3 and FWZ4) |
| 656 | |
| 57df6e96 |
657 | tgal = (yFLT - 2.*fgkLengthExInModBorder)/(fgkExterInterModBorder2 - fgkExterInterModBorder1); |
| dfef1a15 |
658 | alpha = TMath::ATan(tgal); |
| 57df6e96 |
659 | beta = (kPi*0.5 - alpha)*0.5; |
| 660 | tgbe = TMath::Tan(beta); |
| dfef1a15 |
661 | trpa[0] = xFLT*0.5; |
| 662 | trpa[1] = 0.; |
| 663 | trpa[2] = 0.; |
| 57df6e96 |
664 | trpa[3] = 2.*fgkModuleWallThickness; |
| 665 | trpa[4] = (fgkLengthExInModBorder - 2.*fgkModuleWallThickness*tgbe)*0.5; |
| 666 | trpa[5] = (fgkLengthExInModBorder + 2.*fgkModuleWallThickness*tgbe)*0.5; |
| dfef1a15 |
667 | trpa[6] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; |
| 57df6e96 |
668 | trpa[7] = 2.*fgkModuleWallThickness; |
| 669 | trpa[8] = (fgkLengthExInModBorder - 2.*fgkModuleWallThickness*tgbe)*0.5; |
| 670 | trpa[9] = (fgkLengthExInModBorder + 2.*fgkModuleWallThickness*tgbe)*0.5; |
| dfef1a15 |
671 | trpa[10] = TMath::ATan(tgbe*0.5)*kRaddeg; //TMath::ATan((trpa[5] - trpa[4])/(2.*trpa[3]))*kRaddeg; |
| 57df6e96 |
672 | gMC->Gsvolu("FWZ3","TRAP", idtmed[503], trpa, 11); // Fibre glass |
| dfef1a15 |
673 | |
| 57df6e96 |
674 | //xcoor = 0.; |
| 675 | ycoor = (yFLT - fgkLengthExInModBorder)*0.5; |
| 676 | zcoor = fgkExterInterModBorder1; |
| 677 | gMC->Gspos("FWZ3", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[3],"ONLY"); |
| dfef1a15 |
678 | gMC->Gspos("FWZ3", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[2],"ONLY"); |
| 679 | |
| 680 | if (fTOFHoles) { |
| 681 | //xcoor = 0.; |
| 57df6e96 |
682 | //ycoor = (yFLT - fgkLengthExInModBorder)*0.5; |
| 683 | zcoor = -fgkExterInterModBorder1 + (zlenA*0.5 + fgkInterCentrModBorder1 - 2.*fgkModuleWallThickness)*0.5; |
| dfef1a15 |
684 | gMC->Gspos("FWZ3", 5,"FLTB", xcoor, ycoor, zcoor,idrotm[2],"ONLY"); |
| 57df6e96 |
685 | gMC->Gspos("FWZ3", 6,"FLTC", xcoor, ycoor,-zcoor,idrotm[3],"ONLY"); |
| dfef1a15 |
686 | } |
| 687 | |
| 688 | //xcoor = 0.; |
| 57df6e96 |
689 | ycoor = -(yFLT - fgkLengthExInModBorder)*0.5; |
| 690 | zcoor = fgkExterInterModBorder2; |
| 691 | gMC->Gspos("FWZ3", 3,"FLTA", xcoor, ycoor, zcoor,idrotm[1],"ONLY"); |
| 692 | gMC->Gspos("FWZ3", 4,"FLTA", xcoor, ycoor,-zcoor,idrotm[0],"ONLY"); |
| dfef1a15 |
693 | |
| 694 | if (fTOFHoles) { |
| 695 | //xcoor = 0.; |
| 57df6e96 |
696 | //ycoor = -(yFLT - fgkLengthExInModBorder)*0.5; |
| 697 | zcoor = -fgkExterInterModBorder2 + (zlenA*0.5 + fgkInterCentrModBorder1 - 2.*fgkModuleWallThickness)*0.5; |
| 698 | gMC->Gspos("FWZ3", 7,"FLTB", xcoor, ycoor, zcoor,idrotm[0],"ONLY"); |
| 699 | gMC->Gspos("FWZ3", 8,"FLTC", xcoor, ycoor,-zcoor,idrotm[1],"ONLY"); |
| dfef1a15 |
700 | } |
| 701 | |
| 57df6e96 |
702 | trpa[0] = 0.5*(fgkExterInterModBorder2 - fgkExterInterModBorder1)/TMath::Cos(alpha); |
| 703 | trpa[1] = 2.*fgkModuleWallThickness; |
| dfef1a15 |
704 | trpa[2] = xFLT*0.5; |
| 705 | trpa[3] = -beta*kRaddeg; |
| 706 | trpa[4] = 0.; |
| 707 | trpa[5] = 0.; |
| 57df6e96 |
708 | gMC->Gsvolu("FWZ4","PARA", idtmed[503], trpa, 6); // Fibre glass |
| dfef1a15 |
709 | |
| 57df6e96 |
710 | AliMatrix (idrotm[6],alpha*kRaddeg,90.,90.+alpha*kRaddeg,90.,90.,180.); |
| 711 | AliMatrix (idrotm[7],180.-alpha*kRaddeg,90.,90.-alpha*kRaddeg,90.,90.,0.); |
| dfef1a15 |
712 | |
| 713 | //xcoor = 0.; |
| 714 | ycoor = 0.; |
| 57df6e96 |
715 | zcoor = (fgkExterInterModBorder2 + fgkExterInterModBorder1)*0.5; |
| 716 | gMC->Gspos("FWZ4", 1,"FLTA", xcoor, ycoor, zcoor,idrotm[7],"ONLY"); |
| 717 | gMC->Gspos("FWZ4", 2,"FLTA", xcoor, ycoor,-zcoor,idrotm[6],"ONLY"); |
| dfef1a15 |
718 | |
| 719 | if (fTOFHoles) { |
| 720 | //xcoor = 0.; |
| 721 | //ycoor = 0.; |
| 57df6e96 |
722 | zcoor = -(fgkExterInterModBorder2 + fgkExterInterModBorder1)*0.5 + |
| 723 | (zlenA*0.5 + fgkInterCentrModBorder1 - 2.*fgkModuleWallThickness)*0.5; |
| 724 | gMC->Gspos("FWZ4", 3,"FLTB", xcoor, ycoor, zcoor,idrotm[6],"ONLY"); |
| 725 | gMC->Gspos("FWZ4", 4,"FLTC", xcoor, ycoor,-zcoor,idrotm[7],"ONLY"); |
| dfef1a15 |
726 | } |
| 727 | |
| 57df6e96 |
728 | } |
| dfef1a15 |
729 | |
| 57df6e96 |
730 | //_____________________________________________________________________________ |
| 731 | void AliTOFv6T0::CreateModuleCovers(Float_t xtof, Float_t zlenA) const |
| 732 | { |
| 733 | // |
| 734 | // Create covers for module: |
| 735 | // per each module zone, defined according to |
| 736 | // fgkInterCentrModBorder2, fgkExterInterModBorder1 and zlenA+2 values, |
| 737 | // there is a CORNICE of thickness 2cm in Al |
| 738 | // and the contained zones in honeycomb of Al. |
| 739 | // There is also an interface layer (1.6mm thichness) |
| 740 | // and plastic and Cu corresponding to the flat cables. |
| 741 | // |
| dfef1a15 |
742 | |
| 57df6e96 |
743 | // module cover between strips and cards (cm) |
| 744 | //const Float_t fgkModuleCoverThickness = 2.; |
| dfef1a15 |
745 | |
| 57df6e96 |
746 | //const Float_t fgkInterCentrModBorder2 = 57.5; |
| 747 | //const Float_t fgkExterInterModBorder1 = 196.0; |
| dfef1a15 |
748 | |
| 57df6e96 |
749 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| dfef1a15 |
750 | |
| 57df6e96 |
751 | Float_t par[3]; |
| 752 | par[0] = xtof*0.5 + 2.; |
| 753 | par[1] = fgkModuleCoverThickness*0.5; |
| 754 | par[2] = zlenA*0.5 + 2.; |
| 755 | gMC->Gsvolu("FPEA", "BOX ", idtmed[500], par, 3); // Air |
| 756 | if (fTOFHoles) gMC->Gsvolu("FPEB", "BOX ", idtmed[500], par, 3); // Air |
| 757 | |
| 758 | const Float_t kAlCoverThickness = 1.5; |
| 759 | const Float_t kInterfaceCardThickness = 0.16; |
| 760 | const Float_t kAlSkinThickness = 0.1; |
| 761 | |
| 762 | //par[0] = xtof*0.5 + 2.; |
| 763 | par[1] = kAlCoverThickness*0.5; |
| 764 | //par[2] = zlenA*0.5 + 2.; |
| 765 | gMC->Gsvolu("FALT", "BOX ", idtmed[504], par, 3); // Al |
| 766 | if (fTOFHoles) gMC->Gsvolu("FALB", "BOX ", idtmed[504], par, 3); // Al |
| 767 | Float_t xcoor, ycoor, zcoor; |
| 768 | xcoor = 0.; |
| 769 | ycoor = 0.; |
| 770 | zcoor = 0.; |
| 771 | gMC->Gspos("FALT", 0, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 772 | if (fTOFHoles) gMC->Gspos("FALB", 0, "FPEB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| dfef1a15 |
773 | |
| 57df6e96 |
774 | par[0] = xtof*0.5; |
| 775 | //par[1] = kAlCoverThickness*0.5; |
| 776 | par[2] = fgkInterCentrModBorder2 - 2.; |
| 777 | gMC->Gsvolu("FPE1", "BOX ", idtmed[505], par, 3); // Al honeycomb |
| 778 | //xcoor = 0.; |
| 779 | //ycoor = 0.; |
| 780 | //zcoor = 0.; |
| 781 | gMC->Gspos("FPE1", 0, "FALT", xcoor, ycoor, zcoor, 0, "ONLY"); |
| dfef1a15 |
782 | |
| 57df6e96 |
783 | if (fTOFHoles) { |
| 784 | //par[0] = xtof*0.5; |
| 785 | par[1] = kAlCoverThickness*0.5 - kAlSkinThickness; |
| 786 | //par[2] = fgkInterCentrModBorder2 - 2.; |
| 787 | gMC->Gsvolu("FPE4", "BOX ", idtmed[515], par, 3); // Al honeycomb for holes |
| 788 | //xcoor = 0.; |
| 789 | //ycoor = 0.; |
| 790 | //zcoor = 0.; |
| 791 | gMC->Gspos("FPE4", 0, "FALB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 792 | } |
| dfef1a15 |
793 | |
| 57df6e96 |
794 | //par[0] = xtof*0.5; |
| 795 | //par[1] = kAlCoverThickness*0.5; |
| 796 | par[2] = (fgkExterInterModBorder1 - fgkInterCentrModBorder2)*0.5 - 2.; |
| 797 | gMC->Gsvolu("FPE2", "BOX ", idtmed[505], par, 3); // Al honeycomb |
| 798 | //xcoor = 0.; |
| 799 | //ycoor = 0.; |
| 800 | zcoor = (fgkExterInterModBorder1 + fgkInterCentrModBorder2)*0.5; |
| 801 | gMC->Gspos("FPE2", 1, "FALT", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 802 | gMC->Gspos("FPE2", 2, "FALT", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| dfef1a15 |
803 | |
| 57df6e96 |
804 | if (fTOFHoles) { |
| 805 | //xcoor = 0.; |
| 806 | //ycoor = 0.; |
| 807 | //zcoor = (fgkExterInterModBorder1 + fgkInterCentrModBorder2)*0.5; |
| 808 | gMC->Gspos("FPE2", 1, "FALB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 809 | gMC->Gspos("FPE2", 2, "FALB", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 810 | } |
| dfef1a15 |
811 | |
| 57df6e96 |
812 | //par[0] = xtof*0.5; |
| 813 | //par[1] = kAlCoverThickness*0.5; |
| 814 | par[2] = (zlenA*0.5 + 2. - fgkExterInterModBorder1)*0.5 - 2.; |
| 815 | gMC->Gsvolu("FPE3", "BOX ", idtmed[505], par, 3); // Al honeycomb |
| 816 | //xcoor = 0.; |
| 817 | //ycoor = 0.; |
| 818 | zcoor = (zlenA*0.5 + 2. + fgkExterInterModBorder1)*0.5; |
| 819 | gMC->Gspos("FPE3", 1, "FALT", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 820 | gMC->Gspos("FPE3", 2, "FALT", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| dfef1a15 |
821 | |
| 57df6e96 |
822 | if (fTOFHoles) { |
| 823 | //xcoor = 0.; |
| 824 | //ycoor = 0.; |
| 825 | zcoor = (zlenA*0.5 + 2. + fgkExterInterModBorder1)*0.5; |
| 826 | gMC->Gspos("FPE3", 1, "FALB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 827 | gMC->Gspos("FPE3", 2, "FALB", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 828 | } |
| dfef1a15 |
829 | |
| 57df6e96 |
830 | // volumes for Interface cards |
| 831 | par[0] = xtof*0.5; |
| 832 | par[1] = kInterfaceCardThickness*0.5; |
| 833 | par[2] = fgkInterCentrModBorder2 - 2.; |
| 834 | gMC->Gsvolu("FIF1", "BOX ", idtmed[502], par, 3); // G10 |
| 835 | //xcoor = 0.; |
| 836 | ycoor = kAlCoverThickness*0.5 + kInterfaceCardThickness*0.5; |
| 837 | zcoor = 0.; |
| 838 | gMC->Gspos("FIF1", 0, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| dfef1a15 |
839 | |
| 57df6e96 |
840 | //par[0] = xtof*0.5; |
| 841 | //par[1] = kInterfaceCardThickness*0.5; |
| 842 | par[2] = (fgkExterInterModBorder1 - fgkInterCentrModBorder2)*0.5 - 2.; |
| 843 | gMC->Gsvolu("FIF2", "BOX ", idtmed[502], par, 3); // G10 |
| 844 | //xcoor = 0.; |
| 845 | //ycoor = kAlCoverThickness*0.5 + kInterfaceCardThickness*0.5; |
| 846 | zcoor = (fgkExterInterModBorder1 + fgkInterCentrModBorder2)*0.5; |
| 847 | gMC->Gspos("FIF2", 1, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 848 | gMC->Gspos("FIF2", 2, "FPEA", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 849 | if (fTOFHoles) { |
| 850 | gMC->Gspos("FIF2", 1, "FPEB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 851 | gMC->Gspos("FIF2", 2, "FPEB", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 852 | } |
| dfef1a15 |
853 | |
| 57df6e96 |
854 | //par[0] = xtof*0.5; |
| 855 | //par[1] = kInterfaceCardThickness*0.5; |
| 856 | par[2] = (zlenA*0.5 + 2. - fgkExterInterModBorder1)*0.5 - 2.; |
| 857 | gMC->Gsvolu("FIF3", "BOX ", idtmed[502], par, 3); // G10 |
| 858 | //xcoor = 0.; |
| 859 | //ycoor = kAlCoverThickness*0.5 + kInterfaceCardThickness*0.5; |
| 860 | zcoor = (zlenA*0.5 + 2. + fgkExterInterModBorder1)*0.5; |
| 861 | gMC->Gspos("FIF3", 1, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 862 | gMC->Gspos("FIF3", 2, "FPEA", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 863 | if (fTOFHoles) { |
| 864 | gMC->Gspos("FIF3", 1, "FPEB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 865 | gMC->Gspos("FIF3", 2, "FPEB", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 866 | } |
| dfef1a15 |
867 | |
| 57df6e96 |
868 | // volumes for flat cables |
| 869 | // plastic |
| 870 | const Float_t kPlasticFlatCableThickness = 0.24; |
| 871 | par[0] = xtof*0.5; |
| 872 | par[1] = kPlasticFlatCableThickness*0.5; |
| 873 | par[2] = fgkInterCentrModBorder2 - 2.; |
| 874 | gMC->Gsvolu("FFC1", "BOX ", idtmed[513], par, 3); // Plastic (CH2) |
| 875 | //xcoor = 0.; |
| 876 | ycoor = -kAlCoverThickness*0.5 - kPlasticFlatCableThickness*0.5; |
| 877 | zcoor = 0.; |
| 878 | gMC->Gspos("FFC1", 0, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| dfef1a15 |
879 | |
| 57df6e96 |
880 | //par[0] = xtof*0.5; |
| 881 | //par[1] = kPlasticFlatCableThickness*0.5; |
| 882 | par[2] = (fgkExterInterModBorder1 - fgkInterCentrModBorder2)*0.5 - 2.; |
| 883 | gMC->Gsvolu("FFC2", "BOX ", idtmed[513], par, 3); // Plastic (CH2) |
| 884 | //xcoor = 0.; |
| 885 | //ycoor = -kAlCoverThickness*0.5 - kPlasticFlatCableThickness*0.5; |
| 886 | zcoor = (fgkExterInterModBorder1 + fgkInterCentrModBorder2)*0.5; |
| 887 | gMC->Gspos("FFC2", 1, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 888 | gMC->Gspos("FFC2", 2, "FPEA", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 889 | if (fTOFHoles) { |
| 890 | gMC->Gspos("FFC2", 1, "FPEB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 891 | gMC->Gspos("FFC2", 2, "FPEB", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| dfef1a15 |
892 | } |
| 893 | |
| 57df6e96 |
894 | //par[0] = xtof*0.5; |
| 895 | //par[1] = kPlasticFlatCableThickness*0.5; |
| 896 | par[2] = (zlenA*0.5 + 2. - fgkExterInterModBorder1)*0.5 - 2.; |
| 897 | gMC->Gsvolu("FFC3", "BOX ", idtmed[513], par, 3); // Plastic (CH2) |
| 898 | //xcoor = 0.; |
| 899 | //ycoor = -kAlCoverThickness*0.5 - kPlasticFlatCableThickness*0.5; |
| 900 | zcoor = (zlenA*0.5 + 2. + fgkExterInterModBorder1)*0.5; |
| 901 | gMC->Gspos("FFC3", 1, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 902 | gMC->Gspos("FFC3", 2, "FPEA", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 903 | if (fTOFHoles) { |
| 904 | gMC->Gspos("FFC3", 1, "FPEB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 905 | gMC->Gspos("FFC3", 2, "FPEB", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 906 | } |
| dfef1a15 |
907 | |
| 57df6e96 |
908 | // Cu |
| 909 | const Float_t kCopperFlatCableThickness = 0.01; |
| 910 | par[0] = xtof*0.5; |
| 911 | par[1] = kCopperFlatCableThickness*0.5; |
| 912 | par[2] = fgkInterCentrModBorder2 - 2.; |
| 913 | gMC->Gsvolu("FCC1", "BOX ", idtmed[512], par, 3); // Cu |
| 914 | //xcoor = 0.; |
| 915 | ycoor = -kAlCoverThickness*0.5 - kPlasticFlatCableThickness - kCopperFlatCableThickness*0.5; |
| 916 | zcoor = 0.; |
| 917 | gMC->Gspos("FCC1", 0, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 9f8488c2 |
918 | |
| 57df6e96 |
919 | //par[0] = xtof*0.5; |
| 920 | //par[1] = kCopperFlatCableThickness*0.5; |
| 921 | par[2] = (fgkExterInterModBorder1 - fgkInterCentrModBorder2)*0.5 - 2.; |
| 922 | gMC->Gsvolu("FCC2", "BOX ", idtmed[512], par, 3); // Cu |
| 923 | //xcoor = 0.; |
| 924 | //ycoor = -kAlCoverThickness*0.5 - kPlasticFlatCableThickness - kCopperFlatCableThickness*0.5; |
| 925 | zcoor = (fgkExterInterModBorder1 + fgkInterCentrModBorder2)*0.5; |
| 926 | gMC->Gspos("FCC2", 1, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 927 | gMC->Gspos("FCC2", 2, "FPEA", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 928 | if (fTOFHoles) { |
| 929 | gMC->Gspos("FCC2", 1, "FPEB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 930 | gMC->Gspos("FCC2", 2, "FPEB", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 931 | } |
| 9f8488c2 |
932 | |
| 57df6e96 |
933 | //par[0] = xtof*0.5; |
| 934 | //par[1] = kCopperFlatCableThickness*0.5; |
| 935 | par[2] = (zlenA*0.5 + 2. - fgkExterInterModBorder1)*0.5 - 2.; |
| 936 | gMC->Gsvolu("FCC3", "BOX ", idtmed[512], par, 3); // Cu |
| 937 | //xcoor = 0.; |
| 938 | //ycoor = -kAlCoverThickness*0.5 - kPlasticFlatCableThickness - kCopperFlatCableThickness*0.5; |
| 939 | zcoor = (zlenA*0.5 + 2. + fgkExterInterModBorder1)*0.5; |
| 940 | gMC->Gspos("FCC3", 1, "FPEA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 941 | gMC->Gspos("FCC3", 2, "FPEA", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 942 | if (fTOFHoles) { |
| 943 | gMC->Gspos("FCC3", 1, "FPEB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 944 | gMC->Gspos("FCC3", 2, "FPEB", xcoor, ycoor,-zcoor, 0, "ONLY"); |
| 945 | } |
| 9f8488c2 |
946 | |
| 57df6e96 |
947 | } |
| 9f8488c2 |
948 | |
| 57df6e96 |
949 | //_____________________________________________________________________________ |
| 950 | void AliTOFv6T0::MakeModulesInBTOFvolumes(Float_t ytof, Float_t zlenA) const |
| 951 | { |
| 952 | // |
| 953 | // Fill BTOF_%i (for i=0,...17) volumes |
| 954 | // with volumes FTOA (MRPC strip container), |
| 955 | // In case of TOF holes, two sectors (i.e. 11th and 12th) |
| 956 | // are filled with volumes: FTOB and FTOC (MRPC containers), |
| 957 | // |
| 958 | |
| 959 | //const Float_t fgkInterCentrModBorder1 = 49.5; |
| 960 | |
| 961 | Int_t idrotm[1]; |
| 962 | |
| 963 | //AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,-90.); |
| 964 | AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,270.); |
| 965 | |
| 966 | Float_t xcoor, ycoor, zcoor; |
| 967 | xcoor = 0.; |
| 968 | |
| 969 | // Positioning of fibre glass modules (FTOA, FTOB and FTOC) |
| 970 | |
| 971 | for(Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++){ |
| 972 | if(fTOFSectors[isec]==-1)continue; |
| 973 | char name[16]; |
| 974 | sprintf(name, "BTOF%d",isec); |
| 3c5f55bc |
975 | if (fTOFHoles && (isec==13 || isec==14 || isec==15)) { |
| 57df6e96 |
976 | //if (fTOFHoles && (isec==16||isec==17)) { \\Old 6h convention |
| 977 | //xcoor = 0.; |
| 978 | ycoor = (zlenA*0.5 + fgkInterCentrModBorder1)*0.5; |
| 979 | zcoor = -ytof * 0.25; |
| 980 | gMC->Gspos("FTOB", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 981 | gMC->Gspos("FTOC", 0, name, xcoor,-ycoor, zcoor, idrotm[0], "ONLY"); |
| 982 | } |
| 983 | else { |
| 984 | //xcoor = 0.; |
| 985 | ycoor = 0.; |
| 986 | zcoor = -ytof * 0.25; |
| 987 | gMC->Gspos("FTOA", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 988 | } |
| 989 | } |
| 990 | |
| 991 | } |
| 992 | |
| 993 | //_____________________________________________________________________________ |
| 994 | void AliTOFv6T0::MakeCoversInBTOFvolumes() const |
| 995 | { |
| 996 | // |
| 997 | // Fill BTOF_%i (for i=0,...17) volumes |
| 998 | // with volumes FPEA (to separate strips from FEA cards) |
| 999 | // In case of TOF holes, two sectors (i.e. 11th and 12th) |
| 1000 | // are filled with FPEB volumes |
| 1001 | // (to separate MRPC strips from FEA cards) |
| 1002 | // |
| 1003 | |
| 1004 | // module cover between strips and cards (cm) |
| 1005 | //const Float_t fgkModuleCoverThickness = 2.; |
| 1006 | |
| 1007 | Int_t idrotm[1]; |
| 1008 | |
| 1009 | //AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,-90.); |
| 1010 | AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,270.); |
| 1011 | |
| 1012 | Float_t xcoor, ycoor, zcoor; |
| 1013 | xcoor = 0.; |
| 1014 | ycoor = 0.; |
| 1015 | zcoor = fgkModuleCoverThickness*0.5; |
| 1016 | |
| 1017 | char name[16]; |
| 1018 | |
| 1019 | // Positioning of module covers (FPEA, FPEB) |
| 1020 | |
| 1021 | for(Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++) { |
| 1022 | if(fTOFSectors[isec]==-1)continue; |
| 1023 | sprintf(name, "BTOF%d",isec); |
| 1024 | //if (fTOFHoles && (isec==16||isec==17)) \\Old 6h convention |
| 3c5f55bc |
1025 | if (fTOFHoles && (isec==13 || isec==14 || isec==15)) |
| 57df6e96 |
1026 | gMC->Gspos("FPEB", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 1027 | else |
| 1028 | gMC->Gspos("FPEA", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 1029 | } |
| 1030 | |
| 1031 | } |
| 1032 | |
| 1033 | //_____________________________________________________________________________ |
| 1034 | void AliTOFv6T0::MakeBackInBTOFvolumes(Float_t ytof) const |
| 1035 | { |
| 1036 | // |
| 1037 | // Fill BTOF_%i (for i=0,...17) volumes |
| 1038 | // with volumes FAIA (FEA cards and services container) |
| 1039 | // In case of TOF holes, two sectors (i.e. 11th and 12th) |
| 1040 | // are filled with volumes FAIB (FEA cards and services container). |
| 1041 | // |
| 1042 | |
| 1043 | // module cover between strips and cards (cm) |
| 1044 | //const Float_t fgkModuleCoverThickness = 2.; |
| 1045 | |
| 1046 | Int_t idrotm[1]; |
| 1047 | |
| 1048 | //AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,-90.); |
| 1049 | AliMatrix(idrotm[0], 90., 0., 0., 0., 90.,270.); |
| 1050 | |
| 1051 | Float_t xcoor, ycoor, zcoor; |
| 1052 | xcoor = 0.; |
| 1053 | ycoor = 0.; |
| 1054 | zcoor = fgkModuleCoverThickness + (ytof*0.5 - fgkModuleCoverThickness)*0.5; |
| 1055 | |
| 1056 | char name[16]; |
| 1057 | |
| 1058 | // Positioning of FEA cards and services containers (FAIA and FAIB) |
| 1059 | |
| 1060 | for(Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++) { |
| 1061 | if(fTOFSectors[isec]==-1)continue; |
| 1062 | sprintf(name, "BTOF%d",isec); |
| 1063 | //if (fTOFHoles && (isec==16||isec==17)) \\Old 6h convention |
| 3c5f55bc |
1064 | if (fTOFHoles && (isec==13 || isec==14 || isec==15)) |
| 57df6e96 |
1065 | gMC->Gspos("FAIB", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 1066 | else |
| 1067 | gMC->Gspos("FAIA", 0, name, xcoor, ycoor, zcoor, idrotm[0], "ONLY"); |
| 1068 | } |
| 1069 | |
| 1070 | } |
| 1071 | |
| 1072 | //_____________________________________________________________________________ |
| 1073 | void AliTOFv6T0::MakeStripsInModules(Float_t ytof, Float_t zlenA) const |
| 1074 | { |
| 1075 | // |
| 1076 | // Define MRPC strip volume, called FSTR |
| 1077 | // Insert FSTR volume in FLTA/B/C volumes |
| 1078 | // |
| 1079 | |
| 1080 | // module wall thickness (cm) |
| 1081 | //const Float_t fgkModuleWallThickness = 0.33; |
| 1082 | |
| 1083 | //const Float_t fgkInterCentrModBorder1 = 49.5; |
| 1084 | |
| 1085 | Float_t yFLT = ytof*0.5 - fgkModuleWallThickness; |
| 1086 | |
| 1087 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 1088 | |
| 1089 | ///////////////// Detector itself ////////////////////// |
| 1090 | |
| 1091 | const Int_t knx = fTOFGeometry->NpadX(); // number of pads along x |
| 1092 | const Int_t knz = fTOFGeometry->NpadZ(); // number of pads along z |
| 1093 | const Float_t kPadX = fTOFGeometry->XPad(); // pad length along x |
| 1094 | const Float_t kPadZ = fTOFGeometry->ZPad(); // pad length along z |
| 1095 | |
| 1096 | // new description for strip volume -double stack strip- |
| 1097 | // -- all constants are expressed in cm |
| 1098 | // height of different layers |
| 1099 | const Float_t khhony = 1.0; // height of HONY Layer |
| 1100 | const Float_t khpcby = 0.08; // height of PCB Layer |
| 1101 | const Float_t khrgly = 0.055; // height of RED GLASS Layer |
| 1102 | |
| 1103 | const Float_t khfiliy = 0.125; // height of FISHLINE Layer |
| 1104 | const Float_t khglassy = 0.160*0.5; // semi-height of GLASS Layer |
| 1105 | const Float_t khglfy = khfiliy+2.*khglassy; // height of GLASS Layer |
| 1106 | |
| 1107 | const Float_t khcpcby = 0.16; // height of PCB Central Layer |
| 1108 | const Float_t kwhonz = 8.1; // z dimension of HONEY Layer |
| 1109 | const Float_t kwpcbz1 = 10.64; // z dimension of PCB Lower Layer |
| 1110 | const Float_t kwpcbz2 = 11.6; // z dimension of PCB Upper Layer |
| 1111 | const Float_t kwcpcbz = 12.4; // z dimension of PCB Central Layer |
| 1112 | |
| 1113 | const Float_t kwrglz = 8.; // z dimension of RED GLASS Layer |
| 1114 | const Float_t kwglfz = 7.; // z dimension of GLASS Layer |
| 1115 | const Float_t klsensmx = knx*kPadX; // length of Sensitive Layer |
| 1116 | const Float_t khsensmy = 0.0105; // height of Sensitive Layer |
| 1117 | const Float_t kwsensmz = knz*kPadZ; // width of Sensitive Layer |
| 1118 | |
| 1119 | // height of the FSTR Volume (the strip volume) |
| 1120 | const Float_t khstripy = 2.*khhony+2.*khpcby+4.*khrgly+2.*khglfy+khcpcby; |
| 1121 | |
| 1122 | // width of the FSTR Volume (the strip volume) |
| 1123 | const Float_t kwstripz = kwcpcbz; |
| 1124 | // length of the FSTR Volume (the strip volume) |
| 1125 | const Float_t klstripx = fTOFGeometry->StripLength(); |
| 1126 | |
| 1127 | |
| 1128 | // FSTR volume definition-filling this volume with non sensitive Gas Mixture |
| 1129 | Float_t parfp[3]={klstripx*0.5, khstripy*0.5, kwstripz*0.5}; |
| 1130 | gMC->Gsvolu("FSTR","BOX",idtmed[506],parfp,3); // Freon mix |
| 1131 | |
| 1132 | Float_t posfp[3]={0.,0.,0.}; |
| 1133 | |
| 1134 | // NOMEX (HONEYCOMB) Layer definition |
| 1135 | //parfp[0] = klstripx*0.5; |
| 1136 | parfp[1] = khhony*0.5; |
| 1137 | parfp[2] = kwhonz*0.5; |
| 1138 | gMC->Gsvolu("FHON","BOX",idtmed[501],parfp,3); // Nomex (Honeycomb) |
| 1139 | // positioning 2 NOMEX Layers on FSTR volume |
| 1140 | //posfp[0] = 0.; |
| 1141 | posfp[1] =-khstripy*0.5 + parfp[1]; |
| 1142 | //posfp[2] = 0.; |
| 1143 | gMC->Gspos("FHON",1,"FSTR",0., posfp[1],0.,0,"ONLY"); |
| 1144 | gMC->Gspos("FHON",2,"FSTR",0.,-posfp[1],0.,0,"ONLY"); |
| 1145 | |
| 1146 | // Lower PCB Layer definition |
| 1147 | //parfp[0] = klstripx*0.5; |
| 1148 | parfp[1] = khpcby*0.5; |
| 1149 | parfp[2] = kwpcbz1*0.5; |
| 1150 | gMC->Gsvolu("FPC1","BOX",idtmed[502],parfp,3); // G10 |
| 1151 | |
| 1152 | // Upper PCB Layer definition |
| 1153 | //parfp[0] = klstripx*0.5; |
| 1154 | //parfp[1] = khpcby*0.5; |
| 1155 | parfp[2] = kwpcbz2*0.5; |
| 1156 | gMC->Gsvolu("FPC2","BOX",idtmed[502],parfp,3); // G10 |
| 1157 | |
| 1158 | // positioning 2 external PCB Layers in FSTR volume |
| 1159 | //posfp[0] = 0.; |
| 1160 | posfp[1] =-khstripy*0.5+khhony+parfp[1]; |
| 1161 | //posfp[2] = 0.; |
| 1162 | gMC->Gspos("FPC1",1,"FSTR",0.,-posfp[1],0.,0,"ONLY"); |
| 1163 | gMC->Gspos("FPC2",1,"FSTR",0., posfp[1],0.,0,"ONLY"); |
| 1164 | |
| 1165 | // Central PCB layer definition |
| 1166 | //parfp[0] = klstripx*0.5; |
| 1167 | parfp[1] = khcpcby*0.5; |
| 1168 | parfp[2] = kwcpcbz*0.5; |
| 1169 | gMC->Gsvolu("FPCB","BOX",idtmed[502],parfp,3); // G10 |
| 1170 | // positioning the central PCB layer |
| 1171 | gMC->Gspos("FPCB",1,"FSTR",0.,0.,0.,0,"ONLY"); |
| 1172 | |
| 1173 | // Sensitive volume definition |
| 1174 | Float_t parfs[3] = {klsensmx*0.5, khsensmy*0.5, kwsensmz*0.5}; |
| 1175 | gMC->Gsvolu("FSEN","BOX",idtmed[507],parfs,3); // Cu sensitive |
| 1176 | // dividing FSEN along z in knz=2 and along x in knx=48 |
| 1177 | gMC->Gsdvn("FSEZ","FSEN",knz,3); |
| 1178 | gMC->Gsdvn("FPAD","FSEZ",knx,1); |
| 1179 | // positioning sensitive layer inside FPCB |
| 1180 | gMC->Gspos("FSEN",1,"FPCB",0.,0.,0.,0,"ONLY"); |
| 1181 | |
| 1182 | // RED GLASS Layer definition |
| 1183 | //parfp[0] = klstripx*0.5; |
| 1184 | parfp[1] = khrgly*0.5; |
| 1185 | parfp[2] = kwrglz*0.5; |
| 1186 | gMC->Gsvolu("FRGL","BOX",idtmed[508],parfp,3); // red glass |
| 1187 | // positioning 4 RED GLASS Layers in FSTR volume |
| 1188 | //posfp[0] = 0.; |
| 1189 | posfp[1] = -khstripy*0.5+khhony+khpcby+parfp[1]; |
| 1190 | //posfp[2] = 0.; |
| 1191 | gMC->Gspos("FRGL",1,"FSTR",0., posfp[1],0.,0,"ONLY"); |
| 1192 | gMC->Gspos("FRGL",4,"FSTR",0.,-posfp[1],0.,0,"ONLY"); |
| 1193 | //posfp[0] = 0.; |
| 1194 | posfp[1] = (khcpcby+khrgly)*0.5; |
| 1195 | //posfp[2] = 0.; |
| 1196 | gMC->Gspos("FRGL",2,"FSTR",0.,-posfp[1],0.,0,"ONLY"); |
| 1197 | gMC->Gspos("FRGL",3,"FSTR",0., posfp[1],0.,0,"ONLY"); |
| 1198 | |
| 1199 | // GLASS Layer definition |
| 1200 | //parfp[0] = klstripx*0.5; |
| 1201 | parfp[1] = khglassy; |
| 1202 | parfp[2] = kwglfz*0.5; |
| 1203 | gMC->Gsvolu("FGLF","BOX",idtmed[508],parfp,3); // glass |
| 1204 | // positioning 2 GLASS Layers in FSTR volume |
| 1205 | //posfp[0] = 0.; |
| 1206 | posfp[1] = (khcpcby + khglfy)*0.5 + khrgly; |
| 1207 | //posfp[2] = 0.; |
| 1208 | gMC->Gspos("FGLF",1,"FSTR",0.,-posfp[1],0.,0,"ONLY"); |
| 1209 | gMC->Gspos("FGLF",2,"FSTR",0., posfp[1],0.,0,"ONLY"); |
| 1210 | |
| 1211 | // Positioning the Strips (FSTR volumes) in the FLT volumes |
| 1212 | Int_t maxStripNumbers [5] ={fTOFGeometry->NStripC(), |
| 1213 | fTOFGeometry->NStripB(), |
| 1214 | fTOFGeometry->NStripA(), |
| 1215 | fTOFGeometry->NStripB(), |
| 1216 | fTOFGeometry->NStripC()}; |
| 1217 | |
| 1218 | Int_t idrotm[91]; |
| 1219 | |
| 1220 | Int_t totalStrip = 0; |
| 1221 | Float_t xpos, zpos, ypos, ang; |
| 1222 | for(Int_t iplate = 0; iplate < fTOFGeometry->NPlates(); iplate++){ |
| 1223 | if (iplate>0) totalStrip += maxStripNumbers[iplate-1]; |
| 1224 | for(Int_t istrip = 0; istrip < maxStripNumbers[iplate]; istrip++){ |
| 1225 | |
| 1226 | ang = fTOFGeometry->GetAngles(iplate,istrip); |
| 1227 | AliDebug(1, Form(" iplate = %1i, istrip = %2i ---> ang = %f", iplate, istrip, ang)); |
| 1228 | |
| 1229 | if (ang>0.) AliMatrix (idrotm[istrip+totalStrip],90.,0.,90.+ang,90., ang, 90.); |
| 1230 | else if (ang==0.) AliMatrix (idrotm[istrip+totalStrip],90.,0.,90.,90., 0., 0.); |
| 1231 | else if (ang<0.) AliMatrix (idrotm[istrip+totalStrip],90.,0.,90.+ang,90.,-ang,270.); |
| 1232 | |
| 1233 | xpos = 0.; |
| 1234 | ypos = fTOFGeometry->GetHeights(iplate,istrip) + yFLT*0.5; |
| 1235 | zpos = fTOFGeometry->GetDistances(iplate,istrip); |
| 1236 | gMC->Gspos("FSTR",istrip+totalStrip+1,"FLTA", xpos, ypos,-zpos,idrotm[istrip+totalStrip], "ONLY"); |
| 1237 | |
| 1238 | if (fTOFHoles) { |
| 1239 | if (istrip+totalStrip+1>53) |
| 1240 | gMC->Gspos("FSTR",istrip+totalStrip+1,"FLTC", xpos, ypos,-zpos-(zlenA*0.5 - 2.*fgkModuleWallThickness + fgkInterCentrModBorder1)*0.5,idrotm[istrip+totalStrip],"ONLY"); |
| 1241 | if (istrip+totalStrip+1<39) |
| 1242 | gMC->Gspos("FSTR",istrip+totalStrip+1,"FLTB", xpos, ypos,-zpos+(zlenA*0.5 - 2.*fgkModuleWallThickness + fgkInterCentrModBorder1)*0.5,idrotm[istrip+totalStrip],"ONLY"); |
| 1243 | } |
| 1244 | } |
| 1245 | } |
| 1246 | |
| 1247 | } |
| 1248 | |
| 1249 | //_____________________________________________________________________________ |
| 1250 | void AliTOFv6T0::CreateBackZone(Float_t xtof, Float_t ytof, Float_t zlenA) const |
| 1251 | { |
| 1252 | // |
| 1253 | // Define: |
| 1254 | // - containers for FEA cards, cooling system |
| 1255 | // signal cables and supermodule support structure |
| 1256 | // (volumes called FAIA/B), |
| 1257 | // - containers for FEA cards and some cooling |
| 1258 | // elements for a FEA (volumes called FCA1/2). |
| 1259 | // |
| 1260 | |
| 1261 | // module cover between strips and cards (cm) |
| 1262 | //const Float_t fgkModuleCoverThickness = 2.; |
| 1263 | |
| 1264 | //const Float_t fgkFEAwidth1 = 19.; |
| 1265 | //const Float_t fgkFEAwidth2 = 38.5; |
| 1266 | |
| 1267 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 1268 | |
| 1269 | Int_t idrotm[1]; |
| 1270 | |
| 1271 | // Definition of the air card containers (FAIA and FAIB) |
| 1272 | |
| 1273 | Float_t par[3]; |
| 1274 | par[0] = xtof*0.5; |
| 1275 | par[1] = (ytof*0.5 - fgkModuleCoverThickness)*0.5; |
| 1276 | par[2] = zlenA*0.5; |
| 1277 | gMC->Gsvolu("FAIA", "BOX ", idtmed[500], par, 3); // Air |
| 1278 | if (fTOFHoles) gMC->Gsvolu("FAIB", "BOX ", idtmed[500], par, 3); // Air |
| 1279 | |
| 1280 | // FEA card mother-volume definition |
| 1281 | Float_t carpar[3] = {fgkFEAwidth1*0.5, 5.6, 0.45}; |
| 1282 | gMC->Gsvolu("FCA1", "BOX ", idtmed[500], carpar, 3); // Air |
| 1283 | carpar[0] = fgkFEAwidth2*0.5; |
| 1284 | //carpar[1] = 5.6; |
| 1285 | //carpar[2] = 0.45; |
| 1286 | gMC->Gsvolu("FCA2", "BOX ", idtmed[500], carpar, 3); // Air |
| 1287 | |
| 1288 | // rotation matrix |
| 1289 | AliMatrix(idrotm[0], 90.,180., 90., 90.,180., 0.); |
| 1290 | |
| 1291 | // FEA card mother-volume positioning |
| 1292 | Float_t rowstep = 6.66; |
| 1293 | Float_t rowgap[5] = {13.5, 22.9, 16.94, 23.8, 20.4}; |
| 1294 | Int_t rowb[5] = {6, 7, 6, 19, 7}; |
| 1295 | Float_t carpos[3] = {25. - xtof*0.5, |
| 1296 | (11.5 - (ytof*0.5 - fgkModuleCoverThickness))*0.5, |
| 1297 | 0.}; |
| 1298 | Int_t row = 1; |
| 1299 | Int_t nrow = 0; |
| 1300 | for (Int_t sg= -1; sg< 2; sg+= 2) { |
| 1301 | carpos[2] = sg*zlenA*0.5; |
| 1302 | for (Int_t nb=0; nb<5; ++nb) { |
| 1303 | carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep); |
| 1304 | nrow = row + rowb[nb]; |
| 1305 | for ( ; row < nrow ; ++row) { |
| 1306 | |
| 1307 | carpos[2] -= sg*rowstep; |
| 1308 | |
| 1309 | if (nb==4) { |
| 1310 | gMC->Gspos("FCA1",2*row, "FAIA", carpos[0],carpos[1],carpos[2], 0,"ONLY"); |
| 1311 | gMC->Gspos("FCA1",2*row-1,"FAIA",-carpos[0],carpos[1],carpos[2], 0,"ONLY"); |
| 1312 | gMC->Gspos("FCA2", row, "FAIA", 0.,carpos[1],carpos[2], 0,"ONLY"); |
| 1313 | |
| 1314 | } |
| 1315 | else { |
| 1316 | switch (sg) { |
| 1317 | case 1: |
| 1318 | gMC->Gspos("FCA1",2*row, "FAIA", carpos[0],carpos[1],carpos[2], 0,"ONLY"); |
| 1319 | gMC->Gspos("FCA1",2*row-1,"FAIA",-carpos[0],carpos[1],carpos[2], 0,"ONLY"); |
| 1320 | gMC->Gspos("FCA2", row, "FAIA", 0.,carpos[1],carpos[2], 0,"ONLY"); |
| 1321 | break; |
| 1322 | case -1: |
| 1323 | gMC->Gspos("FCA1",2*row, "FAIA", carpos[0],carpos[1],carpos[2], idrotm[0],"ONLY"); |
| 1324 | gMC->Gspos("FCA1",2*row-1,"FAIA",-carpos[0],carpos[1],carpos[2], idrotm[0],"ONLY"); |
| 1325 | gMC->Gspos("FCA2", row, "FAIA", 0.,carpos[1],carpos[2], idrotm[0],"ONLY"); |
| 1326 | break; |
| 1327 | } |
| 1328 | |
| 1329 | } |
| 1330 | } |
| 1331 | } |
| 1332 | } |
| 1333 | |
| 1334 | gMC->Gspos("FCA1", 182, "FAIA", carpos[0],carpos[1],0., 0,"ONLY"); |
| 1335 | gMC->Gspos("FCA1", 181, "FAIA",-carpos[0],carpos[1],0., 0,"ONLY"); |
| 1336 | gMC->Gspos("FCA2", 91, "FAIA", 0., carpos[1], 0., 0, "ONLY"); |
| 1337 | |
| 1338 | if (fTOFHoles) { |
| 1339 | row = 1; |
| 1340 | for (Int_t sg= -1; sg< 2; sg+= 2) { |
| 1341 | carpos[2] = sg*zlenA*0.5; |
| 1342 | for (Int_t nb=0; nb<4; ++nb) { |
| 1343 | carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep); |
| 1344 | nrow = row + rowb[nb]; |
| 1345 | for ( ; row < nrow ; ++row) { |
| 1346 | carpos[2] -= sg*rowstep; |
| 1347 | |
| 1348 | switch (sg) { |
| 1349 | case 1: |
| 1350 | gMC->Gspos("FCA1",2*row, "FAIB", carpos[0],carpos[1],carpos[2], 0,"ONLY"); |
| 1351 | gMC->Gspos("FCA1",2*row-1,"FAIB",-carpos[0],carpos[1],carpos[2], 0,"ONLY"); |
| 1352 | gMC->Gspos("FCA2", row, "FAIB", 0.,carpos[1],carpos[2], 0,"ONLY"); |
| 1353 | break; |
| 1354 | case -1: |
| 1355 | gMC->Gspos("FCA1",2*row, "FAIB", carpos[0],carpos[1],carpos[2], idrotm[0],"ONLY"); |
| 1356 | gMC->Gspos("FCA1",2*row-1,"FAIB",-carpos[0],carpos[1],carpos[2], idrotm[0],"ONLY"); |
| 1357 | gMC->Gspos("FCA2", row, "FAIB", 0.,carpos[1],carpos[2], idrotm[0],"ONLY"); |
| 1358 | break; |
| 1359 | } |
| 1360 | } |
| 1361 | } |
| 1362 | } |
| 1363 | } |
| 1364 | |
| 1365 | } |
| 1366 | |
| 1367 | //_____________________________________________________________________________ |
| 1368 | void AliTOFv6T0::MakeFrontEndElectronics() const |
| 1369 | { |
| 1370 | // |
| 1371 | // Fill FCA1/2 volumes with FEA cards (FFEA volumes). |
| 1372 | // |
| 1373 | |
| 1374 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 1375 | |
| 1376 | //const Float_t fgkFEAwidth1 = 19.; |
| 1377 | |
| 1378 | // FEA card volume definition |
| 1379 | Float_t feaParam1[3] = {fgkFEAwidth1*0.5, 5.6, 0.1}; |
| 1380 | gMC->Gsvolu("FFEA", "BOX ", idtmed[502], feaParam1, 3); // G10 |
| 1381 | |
| 1382 | // FEA card volume positioning |
| 1383 | Float_t carpar[3] = {fgkFEAwidth1*0.5, 5.6, 0.45}; |
| 1384 | gMC->Gspos("FFEA", 1, "FCA1", 0., 0., -carpar[2]+feaParam1[2], 0, "ONLY"); |
| 1385 | gMC->Gspos("FFEA", 2, "FCA2", -(feaParam1[0]+0.25), 0., -carpar[2]+feaParam1[2], 0, "ONLY"); |
| 1386 | gMC->Gspos("FFEA", 3, "FCA2", (feaParam1[0]+0.25), 0., -carpar[2]+feaParam1[2], 0, "ONLY"); |
| 1387 | |
| 1388 | } |
| 1389 | |
| 1390 | //_____________________________________________________________________________ |
| 1391 | void AliTOFv6T0::MakeFEACooling(Float_t xtof, Float_t ytof, Float_t zlenA) const |
| 1392 | { |
| 1393 | // |
| 1394 | // Make cooling system attached to each FEA card |
| 1395 | // (FAL1, FRO1 and FBAR/1/2 volumes) |
| 1396 | // in FAIA/B and FCA1/2 volume containers. |
| 1397 | // |
| 1398 | |
| 1399 | // honeycomb layer between strips and cards (cm) |
| 1400 | //const Float_t fgkModuleCoverThickness = 2.; |
| 1401 | |
| 1402 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 1403 | |
| 1404 | //const Float_t fgkFEAwidth1 = 19.; |
| 1405 | |
| 1406 | Float_t feaParam1[3] = {fgkFEAwidth1*0.5, 5.6, 0.1}; |
| 1407 | |
| 1408 | // first FEA cooling element definition |
| 1409 | Float_t al1[3] = {fgkFEAwidth1*0.5, 0.4, 0.2}; |
| 1410 | gMC->Gsvolu("FAL1", "BOX ", idtmed[504], al1, 3); // Al |
| 1411 | // first FEA cooling element positioning |
| 1412 | Float_t carpar[3] = {fgkFEAwidth1*0.5, 5.6, 0.45}; |
| 9f8488c2 |
1413 | gMC->Gspos("FAL1", 1, "FCA1", 0., carpar[1]-al1[1], -carpar[2]+2.*feaParam1[2]+al1[2], 0, "ONLY"); |
| 57df6e96 |
1414 | gMC->Gspos("FAL1", 2, "FCA2", -(feaParam1[0]+0.25), carpar[1]-al1[1], -carpar[2]+2.*feaParam1[2]+al1[2], 0, "ONLY"); |
| 1415 | gMC->Gspos("FAL1", 3, "FCA2", (feaParam1[0]+0.25), carpar[1]-al1[1], -carpar[2]+2.*feaParam1[2]+al1[2], 0, "ONLY"); |
| 1416 | |
| 1417 | // second FEA cooling element difinition |
| 1418 | //Float_t feaRoof1[3] = {9.5, 0.2, 1.45}; |
| 1419 | Float_t feaRoof1[3] = {al1[0], al1[2], 1.45}; |
| 1420 | gMC->Gsvolu("FRO1", "BOX ", idtmed[504], feaRoof1, 3); // Al |
| 1421 | |
| 1422 | // third FEA cooling element difinition |
| 1423 | Float_t bar[3] = {8.575, 0.6, 0.25}; |
| 1424 | gMC->Gsvolu("FBAR", "BOX ", idtmed[504], bar, 3); // Al |
| 1425 | |
| 1426 | // fourth FEA cooling element difinition |
| 1427 | //Float_t bar1[3] = {8.575, 0.6, 0.1}; |
| 1428 | Float_t bar1[3] = {bar[0], bar[1], 0.1}; |
| 1429 | gMC->Gsvolu("FBA1", "BOX ", idtmed[504], bar1, 3); // Al |
| 1430 | |
| 1431 | // fifth FEA cooling element difinition |
| 1432 | //Float_t bar2[3] = {8.575, 0.1, 0.4}; |
| 1433 | Float_t bar2[3] = {bar[0], 0.1, bar[1]-2.*bar[2]}; |
| 1434 | gMC->Gsvolu("FBA2", "BOX ", idtmed[504], bar2, 3); // Al |
| 1435 | |
| 1436 | //const Float_t fgkCBLw = 13.5; // width of lateral cables and tubes block |
| 1437 | |
| 1438 | Float_t tubepar[3] = {0., 0.4, xtof*0.5 - fgkCBLw}; |
| 1439 | |
| 1440 | // FEA cooling components positioning |
| 1441 | Float_t rowstep = 6.66; |
| 1442 | Float_t rowgap[5] = {13.5, 22.9, 16.94, 23.8, 20.4}; |
| 1443 | Int_t rowb[5] = {6, 7, 6, 19, 7}; |
| 1444 | Float_t carpos[3] = {25. - xtof*0.5, |
| 1445 | (11.5 - (ytof*0.5 - fgkModuleCoverThickness))*0.5, |
| 1446 | 0.}; |
| 1447 | Int_t row = 1; |
| 1448 | Int_t nrow = 0; |
| 1449 | for (Int_t sg= -1; sg< 2; sg+= 2) { |
| 1450 | carpos[2] = sg*zlenA*0.5; |
| 1451 | for (Int_t nb=0; nb<5; ++nb) { |
| 1452 | carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep); |
| 1453 | nrow = row + rowb[nb]; |
| 1454 | for ( ; row < nrow ; ++row) { |
| 1455 | |
| 1456 | carpos[2] -= sg*rowstep; |
| 1457 | |
| 1458 | if (nb==4) { |
| 1459 | |
| 1460 | gMC->Gspos("FBAR",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY"); |
| 1461 | gMC->Gspos("FBAR",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY"); |
| 1462 | gMC->Gspos("FBAR",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY"); |
| 1463 | gMC->Gspos("FBAR",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY"); |
| 1464 | |
| 1465 | gMC->Gspos("FBA1",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY"); |
| 1466 | gMC->Gspos("FBA1",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY"); |
| 1467 | gMC->Gspos("FBA1",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY"); |
| 1468 | gMC->Gspos("FBA1",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY"); |
| 1469 | |
| 1470 | gMC->Gspos("FBA2",8*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar2[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1471 | gMC->Gspos("FBA2",8*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1472 | gMC->Gspos("FBA2",8*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1473 | gMC->Gspos("FBA2",8*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar2[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1474 | |
| 1475 | gMC->Gspos("FBA2",8*row-4,"FAIA", carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1476 | gMC->Gspos("FBA2",8*row-5,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1477 | gMC->Gspos("FBA2",8*row-6,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1478 | gMC->Gspos("FBA2",8*row-7,"FAIA",-carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1479 | |
| 1480 | |
| 1481 | gMC->Gspos("FRO1",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); |
| 1482 | gMC->Gspos("FRO1",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); |
| 1483 | gMC->Gspos("FRO1",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); |
| 1484 | gMC->Gspos("FRO1",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); |
| 1485 | |
| 1486 | } |
| 1487 | else { |
| 1488 | |
| 1489 | gMC->Gspos("FBAR",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY"); |
| 1490 | gMC->Gspos("FBAR",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY"); |
| 1491 | gMC->Gspos("FBAR",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY"); |
| 1492 | gMC->Gspos("FBAR",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY"); |
| 1493 | |
| 1494 | gMC->Gspos("FBA1",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY"); |
| 1495 | gMC->Gspos("FBA1",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY"); |
| 1496 | gMC->Gspos("FBA1",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY"); |
| 1497 | gMC->Gspos("FBA1",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY"); |
| 1498 | |
| 1499 | gMC->Gspos("FBA2",8*row, "FAIA", carpos[0],carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1500 | gMC->Gspos("FBA2",8*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1501 | gMC->Gspos("FBA2",8*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1502 | gMC->Gspos("FBA2",8*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1503 | |
| 1504 | gMC->Gspos("FBA2",8*row-4,"FAIA", carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1505 | gMC->Gspos("FBA2",8*row-5,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1506 | gMC->Gspos("FBA2",8*row-6,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1507 | gMC->Gspos("FBA2",8*row-7,"FAIA",-carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1508 | |
| 1509 | gMC->Gspos("FRO1",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); |
| 1510 | gMC->Gspos("FRO1",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); |
| 1511 | gMC->Gspos("FRO1",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); |
| 1512 | gMC->Gspos("FRO1",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); |
| 1513 | |
| 1514 | } |
| 1515 | } |
| 1516 | } |
| 1517 | } |
| 1518 | |
| 1519 | gMC->Gspos("FBAR",364, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY"); |
| 1520 | gMC->Gspos("FBAR",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY"); |
| 1521 | gMC->Gspos("FBAR",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY"); |
| 1522 | gMC->Gspos("FBAR",361, "FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY"); |
| 1523 | |
| 1524 | gMC->Gspos("FBA1",364, "FAIA", carpos[0],carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY"); |
| 1525 | gMC->Gspos("FBA1",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY"); |
| 1526 | gMC->Gspos("FBA1",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY"); |
| 1527 | gMC->Gspos("FBA1",361, "FAIA",-carpos[0],carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY"); |
| 1528 | |
| 1529 | gMC->Gspos("FBA2",728, "FAIA", carpos[0],carpos[1]+carpar[1]-bar2[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1530 | gMC->Gspos("FBA2",727, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1531 | gMC->Gspos("FBA2",726, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1532 | gMC->Gspos("FBA2",725, "FAIA",-carpos[0],carpos[1]+carpar[1]-bar2[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1533 | |
| 1534 | gMC->Gspos("FBA2",724,"FAIA", carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1535 | gMC->Gspos("FBA2",723,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1536 | gMC->Gspos("FBA2",722,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1537 | gMC->Gspos("FBA2",721,"FAIA",-carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], -(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1538 | |
| 1539 | gMC->Gspos("FRO1",364, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); |
| 1540 | gMC->Gspos("FRO1",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); |
| 1541 | gMC->Gspos("FRO1",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); |
| 1542 | gMC->Gspos("FRO1",361, "FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); |
| 1543 | |
| 1544 | |
| 1545 | if (fTOFHoles) { |
| 1546 | row = 1; |
| 1547 | for (Int_t sg= -1; sg< 2; sg+= 2) { |
| 1548 | carpos[2] = sg*zlenA*0.5; |
| 1549 | for (Int_t nb=0; nb<4; ++nb) { |
| 1550 | carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep); |
| 1551 | nrow = row + rowb[nb]; |
| 1552 | for ( ; row < nrow ; ++row) { |
| 1553 | carpos[2] -= sg*rowstep; |
| 1554 | |
| 1555 | gMC->Gspos("FBAR",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY"); |
| 1556 | gMC->Gspos("FBAR",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY"); |
| 1557 | gMC->Gspos("FBAR",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY"); |
| 1558 | gMC->Gspos("FBAR",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-bar[2]), 0,"ONLY"); |
| 1559 | |
| 1560 | gMC->Gspos("FBA1",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY"); |
| 1561 | gMC->Gspos("FBA1",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY"); |
| 1562 | gMC->Gspos("FBA1",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY"); |
| 1563 | gMC->Gspos("FBA1",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]-bar[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-2.*tubepar[1]-bar1[2]), 0,"ONLY"); |
| 1564 | |
| 1565 | gMC->Gspos("FBA2",8*row, "FAIB", carpos[0],carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1566 | gMC->Gspos("FBA2",8*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1567 | gMC->Gspos("FBA2",8*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1568 | gMC->Gspos("FBA2",8*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]-bar2[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1569 | |
| 1570 | gMC->Gspos("FBA2",8*row-4,"FAIB", carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1571 | gMC->Gspos("FBA2",8*row-5,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1572 | gMC->Gspos("FBA2",8*row-6,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1573 | gMC->Gspos("FBA2",8*row-7,"FAIB",-carpos[0],carpos[1]+carpar[1]-3.*bar2[1]-2.*tubepar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), 0, "ONLY"); |
| 1574 | |
| 1575 | gMC->Gspos("FRO1",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); |
| 1576 | gMC->Gspos("FRO1",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); |
| 1577 | gMC->Gspos("FRO1",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); |
| 1578 | gMC->Gspos("FRO1",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]+feaRoof1[1],carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+feaRoof1[2]), 0,"ONLY"); |
| 9f8488c2 |
1579 | |
| 57df6e96 |
1580 | } |
| 1581 | } |
| 1582 | } |
| 1583 | } |
| 9f8488c2 |
1584 | |
| 57df6e96 |
1585 | } |
| 9f8488c2 |
1586 | |
| 57df6e96 |
1587 | //_____________________________________________________________________________ |
| 1588 | void AliTOFv6T0::MakeNinoMask(Float_t xtof, Float_t ytof, Float_t zlenA) const |
| 1589 | { |
| 1590 | // |
| 1591 | // Make cooling Nino mask |
| 1592 | // for each FEA card (FAL2/3 and FRO2/3/4 volumes) |
| 1593 | // in FAIA/B and FCA1/2 volume containers. |
| 1594 | // |
| 1595 | |
| 1596 | // honeycomb layer between strips and cards (cm) |
| 1597 | //const Float_t fgkModuleCoverThickness = 2.; |
| 1598 | |
| 1599 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 1600 | |
| 1601 | //const Float_t fgkFEAwidth1 = 19.; |
| 1602 | |
| 1603 | // first Nino ASIC mask volume definition |
| 1604 | Float_t al2[3] = {7.25, 0.75, 0.25}; |
| 1605 | gMC->Gsvolu("FAL2", "BOX ", idtmed[504], al2, 3); // Al |
| 1606 | |
| 1607 | // second Nino ASIC mask volume definition |
| 1608 | Float_t al3[3] = {3., 3.75, 0.1}; |
| 1609 | gMC->Gsvolu("FAL3", "BOX ", idtmed[504], al3, 3); // Al |
| 1610 | |
| 1611 | // first Nino ASIC mask volume positioning |
| 1612 | Float_t feaParam1[3] = {fgkFEAwidth1*0.5, 5.6, 0.1}; |
| 1613 | Float_t carpar[3] = {fgkFEAwidth1*0.5, 5.6, 0.45}; |
| 1614 | gMC->Gspos("FAL2", 1, "FCA1", 0., carpar[1]-2.*al3[1]+0.25, carpar[2]-2.*al3[2]-al2[2], 0, "ONLY"); |
| 1615 | gMC->Gspos("FAL2", 2, "FCA2", -(feaParam1[0]+0.25), carpar[1]-2.*al3[1]+0.25, carpar[2]-2.*al3[2]-al2[2], 0, "ONLY"); |
| 1616 | gMC->Gspos("FAL2", 3, "FCA2", (feaParam1[0]+0.25), carpar[1]-2.*al3[1]+0.25, carpar[2]-2.*al3[2]-al2[2], 0, "ONLY"); |
| 1617 | |
| 1618 | // second Nino ASIC mask volume positioning |
| 1619 | gMC->Gspos("FAL3", 1, "FCA1", 0., carpar[1]-al3[1], carpar[2]-al3[2], 0, "ONLY"); |
| 1620 | gMC->Gspos("FAL3", 2, "FCA2", -(feaParam1[0]+0.25), carpar[1]-al3[1], carpar[2]-al3[2], 0, "ONLY"); |
| 9f8488c2 |
1621 | gMC->Gspos("FAL3", 3, "FCA2", (feaParam1[0]+0.25), carpar[1]-al3[1], carpar[2]-al3[2], 0, "ONLY"); |
| dfef1a15 |
1622 | |
| 57df6e96 |
1623 | //Float_t feaRoof1[3] = {9.5, 0.2, 1.45}; |
| 1624 | Float_t feaRoof1[3] = {fgkFEAwidth1*0.5, 0.2, 1.45}; |
| dfef1a15 |
1625 | |
| 57df6e96 |
1626 | // third Nino ASIC mask volume definition |
| 1627 | //Float_t feaRoof2[3] = {3.35, 0.05, 1.05}; |
| 1628 | Float_t feaRoof2[3] = {al3[0], 0.05, 1.05}; |
| 1629 | gMC->Gsvolu("FRO2", "BOX ", idtmed[504], feaRoof2, 3); // Al |
| dfef1a15 |
1630 | |
| 57df6e96 |
1631 | // fourth Nino ASIC mask volume definition |
| 1632 | //Float_t feaRoof3[3] = {3.35, feaRoof1[1]+feaRoof2[1], 0.1}; |
| 1633 | Float_t feaRoof3[3] = {al3[0], feaRoof1[1]+feaRoof2[1], 0.1}; |
| 1634 | gMC->Gsvolu("FRO3", "BOX ", idtmed[504], feaRoof3, 3); // Al |
| dfef1a15 |
1635 | |
| 57df6e96 |
1636 | // fifth Nino ASIC mask volume definition |
| 1637 | Float_t feaRoof4[3] = {al3[0], 0.05, carpar[2]-feaParam1[2]-feaRoof1[1]-al3[2]}; |
| 1638 | gMC->Gsvolu("FRO4", "BOX ", idtmed[504], feaRoof4, 3); // Al |
| 1639 | |
| 1640 | // other Nino ASIC mask volumes positioning |
| 1641 | Float_t rowstep = 6.66; |
| dfef1a15 |
1642 | Float_t rowgap[5] = {13.5, 22.9, 16.94, 23.8, 20.4}; |
| 57df6e96 |
1643 | Int_t rowb[5] = {6, 7, 6, 19, 7}; |
| 1644 | Float_t carpos[3] = {25. - xtof*0.5, |
| 1645 | (11.5 - (ytof*0.5 - fgkModuleCoverThickness))*0.5, |
| 1646 | 0.}; |
| 1647 | Int_t row = 1; |
| 1648 | Int_t nrow = 0; |
| dfef1a15 |
1649 | for (Int_t sg= -1; sg< 2; sg+= 2) { |
| 1650 | carpos[2] = sg*zlenA*0.5; |
| 1651 | for (Int_t nb=0; nb<5; ++nb) { |
| 1652 | carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep); |
| 1653 | nrow = row + rowb[nb]; |
| 1654 | for ( ; row < nrow ; ++row) { |
| 9f8488c2 |
1655 | |
| dfef1a15 |
1656 | carpos[2] -= sg*rowstep; |
| 9f8488c2 |
1657 | |
| 1658 | if (nb==4) { |
| 9f8488c2 |
1659 | |
| 1660 | gMC->Gspos("FRO2",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); |
| 1661 | gMC->Gspos("FRO2",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); |
| 1662 | gMC->Gspos("FRO2",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); |
| 1663 | gMC->Gspos("FRO2",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); |
| 1664 | |
| 1665 | gMC->Gspos("FRO3",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+(carpar[2]-feaRoof3[2]), 0,"ONLY"); |
| 1666 | gMC->Gspos("FRO3",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+(carpar[2]-feaRoof3[2]), 0,"ONLY"); |
| 1667 | gMC->Gspos("FRO3",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+(carpar[2]-feaRoof3[2]), 0,"ONLY"); |
| 1668 | gMC->Gspos("FRO3",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+(carpar[2]-feaRoof3[2]), 0,"ONLY"); |
| 1669 | |
| 1670 | gMC->Gspos("FRO4",4*row, "FAIA", carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); |
| 1671 | gMC->Gspos("FRO4",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); |
| 1672 | gMC->Gspos("FRO4",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); |
| 1673 | gMC->Gspos("FRO4",4*row-3,"FAIA",-carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); |
| 1674 | |
| 9f8488c2 |
1675 | } |
| 1676 | else { |
| 9f8488c2 |
1677 | |
| 1678 | gMC->Gspos("FRO2",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); |
| 1679 | gMC->Gspos("FRO2",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); |
| 1680 | gMC->Gspos("FRO2",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); |
| 1681 | gMC->Gspos("FRO2",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); |
| 1682 | |
| 1683 | gMC->Gspos("FRO3",4*row, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY"); |
| 1684 | gMC->Gspos("FRO3",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY"); |
| 1685 | gMC->Gspos("FRO3",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY"); |
| 1686 | gMC->Gspos("FRO3",4*row-3,"FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY"); |
| 1687 | |
| 1688 | gMC->Gspos("FRO4",4*row, "FAIA", carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); |
| 1689 | gMC->Gspos("FRO4",4*row-1,"FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); |
| 1690 | gMC->Gspos("FRO4",4*row-2,"FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); |
| 1691 | gMC->Gspos("FRO4",4*row-3,"FAIA",-carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); |
| 1692 | |
| 9f8488c2 |
1693 | } |
| dfef1a15 |
1694 | } |
| 1695 | } |
| dfef1a15 |
1696 | } |
| 9f8488c2 |
1697 | |
| 1698 | gMC->Gspos("FRO2",364, "FAIA", carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); |
| 1699 | gMC->Gspos("FRO2",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); |
| 1700 | gMC->Gspos("FRO2",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); |
| 1701 | gMC->Gspos("FRO2",361, "FAIA",-carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); |
| 1702 | |
| 1703 | gMC->Gspos("FRO3",364, "FAIA", carpos[0],carpos[1]+carpar[1]+feaRoof3[1],(carpar[2]-feaRoof3[2]), 0,"ONLY"); |
| 1704 | gMC->Gspos("FRO3",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],(carpar[2]-feaRoof3[2]), 0,"ONLY"); |
| 1705 | gMC->Gspos("FRO3",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],(carpar[2]-feaRoof3[2]), 0,"ONLY"); |
| 1706 | gMC->Gspos("FRO3",361, "FAIA",-carpos[0],carpos[1]+carpar[1]+feaRoof3[1],(carpar[2]-feaRoof3[2]), 0,"ONLY"); |
| 1707 | |
| 1708 | gMC->Gspos("FRO4",364, "FAIA", carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); |
| 1709 | gMC->Gspos("FRO4",363, "FAIA", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); |
| 1710 | gMC->Gspos("FRO4",362, "FAIA",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); |
| 1711 | gMC->Gspos("FRO4",361, "FAIA",-carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); |
| 1712 | |
| 9f8488c2 |
1713 | |
| dfef1a15 |
1714 | if (fTOFHoles) { |
| 1715 | row = 1; |
| 1716 | for (Int_t sg= -1; sg< 2; sg+= 2) { |
| 1717 | carpos[2] = sg*zlenA*0.5; |
| 1718 | for (Int_t nb=0; nb<4; ++nb) { |
| 1719 | carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep); |
| 1720 | nrow = row + rowb[nb]; |
| 1721 | for ( ; row < nrow ; ++row) { |
| 1722 | carpos[2] -= sg*rowstep; |
| 9f8488c2 |
1723 | |
| 9f8488c2 |
1724 | gMC->Gspos("FRO2",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); |
| 1725 | gMC->Gspos("FRO2",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); |
| 1726 | gMC->Gspos("FRO2",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); |
| 1727 | gMC->Gspos("FRO2",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]+2.*feaRoof1[1]+feaRoof2[1],carpos[2]+sg*(carpar[2]-2.*feaRoof3[2]-feaRoof2[2]), 0,"ONLY"); |
| 1728 | |
| 1729 | gMC->Gspos("FRO3",4*row, "FAIB", carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY"); |
| 1730 | gMC->Gspos("FRO3",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY"); |
| 1731 | gMC->Gspos("FRO3",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY"); |
| 1732 | gMC->Gspos("FRO3",4*row-3,"FAIB",-carpos[0],carpos[1]+carpar[1]+feaRoof3[1],carpos[2]+sg*(carpar[2]-feaRoof3[2]), 0,"ONLY"); |
| 1733 | |
| 1734 | gMC->Gspos("FRO4",4*row, "FAIB", carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); |
| 1735 | gMC->Gspos("FRO4",4*row-1,"FAIB", (feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); |
| 1736 | gMC->Gspos("FRO4",4*row-2,"FAIB",-(feaParam1[0]+0.25),carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); |
| 1737 | gMC->Gspos("FRO4",4*row-3,"FAIB",-carpos[0], carpos[1]+carpar[1]+2.*feaRoof1[1]-feaRoof4[1],carpos[2]+sg*(carpar[2]-2.*al3[2]-feaRoof4[2]), 0,"ONLY"); |
| 1738 | |
| 57df6e96 |
1739 | } |
| 1740 | } |
| 1741 | } |
| 1742 | } |
| 1743 | |
| 1744 | } |
| 1745 | |
| 1746 | //_____________________________________________________________________________ |
| 1747 | void AliTOFv6T0::MakeSuperModuleCooling(Float_t xtof, Float_t ytof, Float_t zlenA) const |
| 1748 | { |
| 1749 | // |
| 1750 | // Make cooling tubes (FTUB volume) |
| 1751 | // and cooling bars (FTLN and FLTN volumes) |
| 1752 | // in FAIA/B volume containers. |
| 1753 | // |
| 1754 | |
| 1755 | //const Float_t fgkInterCentrModBorder2 = 57.5; |
| 1756 | |
| 1757 | // honeycomb layer between strips and cards (cm) |
| 1758 | //const Float_t fgkModuleCoverThickness = 2.; |
| 1759 | |
| 1760 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 1761 | |
| 1762 | Int_t idrotm[1]; |
| 1763 | |
| 1764 | //const Float_t fgkFEAwidth1 = 19.; |
| 1765 | |
| 1766 | //const Float_t fgkCBLw = 13.5; // width of lateral cables and tubes block |
| 1767 | //const Float_t fgkSawThickness = 1.; |
| 1768 | |
| 1769 | // cooling tube volume definition |
| 1770 | Float_t tubepar[3] = {0., 0.4, xtof*0.5 - fgkCBLw - fgkSawThickness}; |
| 1771 | gMC->Gsvolu("FTUB", "TUBE", idtmed[512], tubepar, 3); // Cu |
| 1772 | |
| 1773 | // water cooling tube volume definition |
| 1774 | Float_t tubeparW[3] = {0., 0.3, tubepar[2]}; |
| 1775 | gMC->Gsvolu("FITU", "TUBE", idtmed[509], tubeparW, 3); // H2O |
| 1776 | |
| 1777 | // Positioning of the water tube into the steel one |
| 1778 | gMC->Gspos("FITU",1,"FTUB",0.,0.,0.,0,"ONLY"); |
| 1779 | |
| 1780 | // definition of transverse components of SM cooling system |
| 1781 | Float_t lonpar[3] = {tubepar[2], 6.15, 0.7}; |
| 1782 | gMC->Gsvolu("FTLN", "BOX ", idtmed[504], lonpar, 3); // Al |
| 1783 | lonpar[0] = 2.; |
| 1784 | lonpar[1] = 1.; |
| 1785 | lonpar[2] = zlenA*0.5; |
| 1786 | // definition of longitudinal components of SM cooling system |
| 1787 | gMC->Gsvolu("FLON", "BOX ", idtmed[504], lonpar, 3); // Al |
| 1788 | if (fTOFHoles) { |
| 1789 | lonpar[2] = (zlenA*0.5 - fgkInterCentrModBorder2)*0.5; |
| 1790 | gMC->Gsvolu("FLOB", "BOX ", idtmed[504], lonpar, 3); // Al |
| 1791 | } |
| 1792 | |
| 1793 | // rotation matrix |
| 1794 | AliMatrix(idrotm[0], 180., 90., 90., 90., 90., 0.); |
| 1795 | |
| 1796 | // Positioning of cooling tubes and transverse components of SM |
| 1797 | // cooling system |
| 1798 | Float_t carpar[3] = {fgkFEAwidth1*0.5, 5.6, 0.45}; |
| 1799 | Float_t feaParam1[3] = {fgkFEAwidth1*0.5, 5.6, 0.1}; |
| 1800 | Float_t al1[3] = {fgkFEAwidth1*0.5, 0.4, 0.2}; |
| 1801 | Float_t feaRoof1[3] = {al1[0], al1[2], 1.45}; |
| 1802 | Float_t bar[3] = {8.575, 0.6, 0.25}; |
| 1803 | Float_t rowstep = 6.66; |
| 1804 | Float_t ytub= 3.65; |
| 1805 | Float_t rowgap[5] = {13.5, 22.9, 16.94, 23.8, 20.4}; |
| 1806 | Int_t rowb[5] = {6, 7, 6, 19, 7}; |
| 1807 | Float_t carpos[3] = {25. - xtof*0.5, |
| 1808 | (11.5 - (ytof*0.5 - fgkModuleCoverThickness))*0.5, |
| 1809 | 0.}; |
| 1810 | Int_t row = 1; |
| 1811 | Int_t nrow = 0; |
| 1812 | for (Int_t sg= -1; sg< 2; sg+= 2) { |
| 1813 | carpos[2] = sg*zlenA*0.5; |
| 1814 | for (Int_t nb=0; nb<5; ++nb) { |
| 1815 | carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep); |
| 1816 | nrow = row + rowb[nb]; |
| 1817 | for ( ; row < nrow ; ++row) { |
| 1818 | |
| 1819 | carpos[2] -= sg*rowstep; |
| 1820 | |
| 1821 | if (nb==4) |
| 1822 | gMC->Gspos("FTUB", row, "FAIA", 0., carpos[1]+carpar[1]-bar[1], carpos[2]-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), idrotm[0], "ONLY"); |
| 1823 | else |
| 1824 | gMC->Gspos("FTUB", row, "FAIA", 0., carpos[1]+carpar[1]-bar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), idrotm[0], "ONLY"); |
| 1825 | } |
| 1826 | } |
| 1827 | gMC->Gspos("FTLN", 5+4*sg, "FAIA", 0., -0.1, 369.9*sg, 0, "ONLY"); |
| 1828 | gMC->Gspos("FTLN", 5+3*sg, "FAIA", 0., -0.1, 366.9*sg, 0, "ONLY"); |
| 1829 | gMC->Gspos("FTLN", 5+2*sg, "FAIA", 0., -0.1, 198.8*sg, 0, "ONLY"); |
| 1830 | gMC->Gspos("FTLN", 5+sg, "FAIA", 0., -0.1, 56.82*sg, 0, "ONLY"); |
| 1831 | } |
| 1832 | |
| 1833 | gMC->Gspos("FTUB", 91, "FAIA", 0., carpos[1]+carpar[1]-bar[1],-(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), idrotm[0], "ONLY"); |
| 1834 | |
| 1835 | gMC->Gspos("FLON", 2, "FAIA",-24., ytub+1.4, 0., 0, "MANY"); |
| 1836 | gMC->Gspos("FLON", 1, "FAIA", 24., ytub+1.4, 0., 0, "MANY"); |
| 9f8488c2 |
1837 | |
| 57df6e96 |
1838 | |
| 1839 | if (fTOFHoles) { |
| 1840 | row = 1; |
| 1841 | for (Int_t sg= -1; sg< 2; sg+= 2) { |
| 1842 | carpos[2] = sg*zlenA*0.5; |
| 1843 | for (Int_t nb=0; nb<4; ++nb) { |
| 1844 | carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep); |
| 1845 | nrow = row + rowb[nb]; |
| 1846 | for ( ; row < nrow ; ++row) { |
| 1847 | carpos[2] -= sg*rowstep; |
| 1848 | gMC->Gspos("FTUB", row, "FAIB", 0., carpos[1]+carpar[1]-bar[1], carpos[2]-sg*(carpar[2]-2.*feaParam1[2]-2.*al1[2]+2.*feaRoof1[2]-2.*bar[2]-tubepar[1]), idrotm[0], "ONLY"); |
| dfef1a15 |
1849 | } |
| 1850 | } |
| 57df6e96 |
1851 | |
| dfef1a15 |
1852 | gMC->Gspos("FTLN", 5+4*sg, "FAIB", 0., -0.1, 369.9*sg, 0, "ONLY"); |
| 1853 | gMC->Gspos("FTLN", 5+3*sg, "FAIB", 0., -0.1, 366.9*sg, 0, "ONLY"); |
| 1854 | gMC->Gspos("FTLN", 5+2*sg, "FAIB", 0., -0.1, 198.8*sg, 0, "ONLY"); |
| 1855 | gMC->Gspos("FTLN", 5+sg, "FAIB", 0., -0.1, 56.82*sg, 0, "ONLY"); |
| 1856 | } |
| 57df6e96 |
1857 | |
| 1858 | gMC->Gspos("FLOB", 4, "FAIB",-24., ytub+1.4, (zlenA*0.5 + fgkInterCentrModBorder2)*0.5, 0, "MANY"); |
| 1859 | gMC->Gspos("FLOB", 3, "FAIB", 24., ytub+1.4, (zlenA*0.5 + fgkInterCentrModBorder2)*0.5, 0, "MANY"); |
| 1860 | gMC->Gspos("FLOB", 2, "FAIB",-24., ytub+1.4, -(zlenA*0.5 + fgkInterCentrModBorder2)*0.5, 0, "MANY"); |
| 1861 | gMC->Gspos("FLOB", 1, "FAIB", 24., ytub+1.4, -(zlenA*0.5 + fgkInterCentrModBorder2)*0.5, 0, "MANY"); |
| 1862 | |
| 1863 | } |
| 1864 | |
| 1865 | } |
| 1866 | |
| 1867 | //_____________________________________________________________________________ |
| 1868 | void AliTOFv6T0::MakeSuperModuleServices(Float_t xtof, Float_t ytof, Float_t zlenA) const |
| 1869 | { |
| 1870 | // |
| 1871 | // Make signal cables (FCAB and FCBL/B volumes), |
| 1872 | // supemodule cover (FCOV volume) and wall (FSAW volume) |
| 1873 | // in FAIA/B volume containers. |
| 1874 | // |
| 1875 | |
| 1876 | //const Float_t fgkInterCentrModBorder2 = 57.5; |
| 1877 | |
| 1878 | // honeycomb layer between strips and cards (cm) |
| 1879 | //const Float_t fgkModuleCoverThickness = 2.; |
| 1880 | |
| 1881 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 1882 | |
| 1883 | Int_t idrotm[3]; |
| 1884 | |
| 1885 | //const Float_t fgkCBLw = 13.5; // width of lateral cables and tubes block |
| 1886 | //const Float_t fgkSawThickness = 1.; |
| 1887 | //const Float_t fgkFEAwidth1 = 19.; |
| 1888 | //const Float_t fgkFEAwidth2 = 38.5; |
| 1889 | |
| 1890 | Float_t tubepar[3] = {0., 0.4, xtof*0.5 - fgkCBLw - fgkSawThickness}; |
| 1891 | |
| 1892 | // FEA cables definition |
| 1893 | Float_t cbpar[3] = {0., 0.5, (tubepar[2] - fgkFEAwidth2*0.5)*0.5}; |
| 1894 | gMC->Gsvolu("FCAB", "TUBE", idtmed[510], cbpar, 3); // copper+alu |
| 1895 | cbpar[2] = (xtof*0.5 - fgkCBLw - fgkSawThickness - (xtof*0.5 - 25. + fgkFEAwidth1*0.5))*0.5; |
| 1896 | gMC->Gsvolu("FCAL", "TUBE", idtmed[510], cbpar, 3); // copper+alu |
| 1897 | |
| 1898 | // rotation matrix |
| 1899 | AliMatrix(idrotm[0], 180., 90., 90., 90., 90., 0.); |
| 1900 | |
| 1901 | // FEA cables positioning |
| 1902 | Float_t rowstep = 6.66; |
| 1903 | Float_t ytub= 3.65; |
| 1904 | Float_t ycab= ytub-3.; |
| 1905 | Float_t rowgap[5] = {13.5, 22.9, 16.94, 23.8, 20.4}; |
| 1906 | Int_t rowb[5] = {6, 7, 6, 19, 7}; |
| 1907 | Float_t carpos[3] = {25. - xtof*0.5, |
| 1908 | (11.5 - (ytof*0.5 - fgkModuleCoverThickness))*0.5, |
| 1909 | 0.}; |
| 1910 | Int_t row = 1; |
| 1911 | Int_t nrow = 0; |
| 1912 | Float_t xCable = (xtof*0.5 - fgkCBLw - fgkSawThickness + fgkFEAwidth2*0.5)*0.5; |
| 1913 | Float_t xCableL = (xtof*0.5 - fgkCBLw - fgkSawThickness + (xtof*0.5 - 25. + fgkFEAwidth1*0.5))*0.5; |
| 1914 | for (Int_t sg= -1; sg< 2; sg+= 2) { |
| 1915 | carpos[2] = sg*zlenA*0.5; |
| 1916 | for (Int_t nb=0; nb<5; ++nb) { |
| 1917 | carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep); |
| 1918 | nrow = row + rowb[nb]; |
| 1919 | for ( ; row < nrow ; ++row) { |
| 1920 | |
| 1921 | carpos[2] -= sg*rowstep; |
| 1922 | |
| 1923 | if (nb==4) |
| 1924 | { |
| 1925 | gMC->Gspos("FCAB", 2*row, "FAIA", xCable, ycab, carpos[2]-1.1, idrotm[0], "ONLY"); |
| 1926 | gMC->Gspos("FCAB", 2*row-1, "FAIA",-xCable, ycab, carpos[2]-1.1, idrotm[0], "ONLY"); |
| 1927 | gMC->Gspos("FCAL", 2*row, "FAIA", xCableL, ycab-2.*cbpar[1], carpos[2]-1.1, idrotm[0], "ONLY"); |
| 1928 | gMC->Gspos("FCAL", 2*row-1, "FAIA",-xCableL, ycab-2.*cbpar[1], carpos[2]-1.1, idrotm[0], "ONLY"); |
| 1929 | } |
| 1930 | else |
| 1931 | { |
| 1932 | gMC->Gspos("FCAB", 2*row, "FAIA", xCable, ycab, carpos[2]-sg*1.1, idrotm[0], "ONLY"); |
| 1933 | gMC->Gspos("FCAB", 2*row-1, "FAIA",-xCable, ycab, carpos[2]-sg*1.1, idrotm[0], "ONLY"); |
| 1934 | gMC->Gspos("FCAL", 2*row, "FAIA", xCableL, ycab-2.*cbpar[1], carpos[2]-sg*1.1, idrotm[0], "ONLY"); |
| 1935 | gMC->Gspos("FCAL", 2*row-1, "FAIA",-xCableL, ycab-2.*cbpar[1], carpos[2]-sg*1.1, idrotm[0], "ONLY"); |
| 1936 | } |
| 1937 | } |
| 1938 | } |
| 1939 | } |
| 1940 | |
| 1941 | gMC->Gspos("FCAB", 182, "FAIA", xCable, ycab, -1.1, idrotm[0], "ONLY"); |
| 1942 | gMC->Gspos("FCAB", 181, "FAIA",-xCable, ycab, -1.1, idrotm[0], "ONLY"); |
| 1943 | gMC->Gspos("FCAL", 182, "FAIA", xCableL, ycab-2.*cbpar[1], -1.1, idrotm[0], "ONLY"); |
| 1944 | gMC->Gspos("FCAL", 181, "FAIA",-xCableL, ycab-2.*cbpar[1], -1.1, idrotm[0], "ONLY"); |
| 1945 | |
| 1946 | if (fTOFHoles) { |
| 1947 | row = 1; |
| 1948 | for (Int_t sg= -1; sg< 2; sg+= 2) { |
| 1949 | carpos[2] = sg*zlenA*0.5; |
| 1950 | for (Int_t nb=0; nb<4; ++nb) { |
| 1951 | carpos[2] = carpos[2] - sg*(rowgap[nb] - rowstep); |
| 1952 | nrow = row + rowb[nb]; |
| 1953 | for ( ; row < nrow ; ++row) { |
| 1954 | carpos[2] -= sg*rowstep; |
| 1955 | gMC->Gspos("FCAB", 2*row, "FAIB", xCable, ycab, carpos[2]-sg*1.1, idrotm[0], "ONLY"); |
| 1956 | gMC->Gspos("FCAB", 2*row-1, "FAIB",-xCable, ycab, carpos[2]-sg*1.1, idrotm[0], "ONLY"); |
| 1957 | gMC->Gspos("FCAL", 2*row, "FAIB", xCableL, ycab-2.*cbpar[1], carpos[2]-sg*1.1, idrotm[0], "ONLY"); |
| 1958 | gMC->Gspos("FCAL", 2*row-1, "FAIB",-xCableL, ycab-2.*cbpar[1], carpos[2]-sg*1.1, idrotm[0], "ONLY"); |
| 1959 | } |
| 1960 | } |
| 1961 | } |
| dfef1a15 |
1962 | } |
| 1963 | |
| 1964 | // Cables and tubes on the side blocks |
| 57df6e96 |
1965 | // constants definition |
| 1966 | const Float_t kCBLl = zlenA*0.5; // length of block |
| 1967 | const Float_t kCBLlh = zlenA*0.5 - fgkInterCentrModBorder2; // length of block in case of holes |
| 1968 | //const Float_t fgkCBLw = 13.5; // width of block |
| 1969 | //const Float_t fgkCBLh1 = 2.; // min. height of block |
| 1970 | //const Float_t fgkCBLh2 = 12.3; // max. height of block |
| 1971 | //const Float_t fgkSawThickness = 1.; // Al wall thickness |
| 1972 | |
| 1973 | // lateral cable and tube volume definition |
| 1974 | Float_t tgal = (fgkCBLh2 - fgkCBLh1)/(2.*kCBLl); |
| dfef1a15 |
1975 | Float_t cblpar[11]; |
| 57df6e96 |
1976 | cblpar[0] = fgkCBLw *0.5; |
| dfef1a15 |
1977 | cblpar[1] = 0.; |
| 1978 | cblpar[2] = 0.; |
| 57df6e96 |
1979 | cblpar[3] = kCBLl *0.5; |
| 1980 | cblpar[4] = fgkCBLh1 *0.5; |
| 1981 | cblpar[5] = fgkCBLh2 *0.5; |
| dfef1a15 |
1982 | cblpar[6] = TMath::ATan(tgal)*kRaddeg; |
| 57df6e96 |
1983 | cblpar[7] = kCBLl *0.5; |
| 1984 | cblpar[8] = fgkCBLh1 *0.5; |
| 1985 | cblpar[9] = fgkCBLh2 *0.5; |
| dfef1a15 |
1986 | cblpar[10]= cblpar[6]; |
| 57df6e96 |
1987 | gMC->Gsvolu("FCBL", "TRAP", idtmed[511], cblpar, 11); // cables and tubes mix |
| 1988 | |
| 1989 | // Side Al Walls definition |
| 1990 | Float_t sawpar[3] = {fgkSawThickness*0.5, fgkCBLh2*0.5, kCBLl}; |
| 1991 | gMC->Gsvolu("FSAW", "BOX ", idtmed[504], sawpar, 3); // Al |
| 1992 | |
| 1993 | AliMatrix(idrotm[1], 90., 90., 180., 0., 90., 180.); |
| 1994 | AliMatrix(idrotm[2], 90., 90., 0., 0., 90., 0.); |
| 1995 | |
| 1996 | // lateral cable and tube volume positioning |
| 1997 | Float_t xcoor, ycoor, zcoor; |
| 1998 | xcoor = (xtof - fgkCBLw)*0.5 - 2.*sawpar[0]; |
| 1999 | ycoor = (fgkCBLh1 + fgkCBLh2)*0.25 - (ytof*0.5 - fgkModuleCoverThickness)*0.5; |
| 2000 | zcoor = kCBLl*0.5; |
| 2001 | gMC->Gspos("FCBL", 1, "FAIA", -xcoor, ycoor, -zcoor, idrotm[1], "ONLY"); |
| 2002 | gMC->Gspos("FCBL", 2, "FAIA", xcoor, ycoor, -zcoor, idrotm[1], "ONLY"); |
| 2003 | gMC->Gspos("FCBL", 3, "FAIA", -xcoor, ycoor, zcoor, idrotm[2], "ONLY"); |
| 2004 | gMC->Gspos("FCBL", 4, "FAIA", xcoor, ycoor, zcoor, idrotm[2], "ONLY"); |
| 2005 | |
| dfef1a15 |
2006 | if (fTOFHoles) { |
| 57df6e96 |
2007 | cblpar[3] = kCBLlh *0.5; |
| 2008 | cblpar[5] = fgkCBLh1*0.5 + kCBLlh*tgal; |
| 2009 | cblpar[7] = kCBLlh *0.5; |
| dfef1a15 |
2010 | cblpar[9] = cblpar[5]; |
| 57df6e96 |
2011 | gMC->Gsvolu("FCBB", "TRAP", idtmed[511], cblpar, 11); // cables and tubes mix |
| 2012 | |
| 2013 | xcoor = (xtof - fgkCBLw)*0.5 - 2.*sawpar[0]; |
| 2014 | ycoor = (fgkCBLh1 + 2.*cblpar[5])*0.25 - (ytof*0.5 - fgkModuleCoverThickness)*0.5; |
| 2015 | zcoor = kCBLl-kCBLlh*0.5; |
| 2016 | gMC->Gspos("FCBB", 1, "FAIB", -xcoor, ycoor, -zcoor, idrotm[1], "ONLY"); |
| 2017 | gMC->Gspos("FCBB", 2, "FAIB", xcoor, ycoor, -zcoor, idrotm[1], "ONLY"); |
| 2018 | gMC->Gspos("FCBB", 3, "FAIB", -xcoor, ycoor, zcoor, idrotm[2], "ONLY"); |
| 2019 | gMC->Gspos("FCBB", 4, "FAIB", xcoor, ycoor, zcoor, idrotm[2], "ONLY"); |
| 2020 | } |
| 2021 | |
| 2022 | // lateral cable and tube volume positioning |
| 2023 | xcoor = xtof*0.5-sawpar[0]; |
| 2024 | ycoor = (fgkCBLh2 - ytof*0.5 + fgkModuleCoverThickness)*0.5; |
| 2025 | zcoor = 0.; |
| 2026 | gMC->Gspos("FSAW", 1, "FAIA", -xcoor, ycoor, zcoor, 0, "ONLY"); |
| 2027 | gMC->Gspos("FSAW", 2, "FAIA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 2028 | |
| 2029 | if (fTOFHoles) { |
| dfef1a15 |
2030 | xcoor = xtof*0.5 - sawpar[0]; |
| 57df6e96 |
2031 | ycoor = (fgkCBLh2 - ytof*0.5 + fgkModuleCoverThickness)*0.5; |
| dfef1a15 |
2032 | gMC->Gspos("FSAW", 1, "FAIB", -xcoor, ycoor, 0., 0, "ONLY"); |
| 2033 | gMC->Gspos("FSAW", 2, "FAIB", xcoor, ycoor, 0., 0, "ONLY"); |
| 2034 | } |
| 2035 | |
| 2036 | // TOF Supermodule cover definition and positioning |
| 57df6e96 |
2037 | Float_t covpar[3] = {xtof*0.5, 0.075, zlenA*0.5}; |
| 2038 | gMC->Gsvolu("FCOV", "BOX ", idtmed[504], covpar, 3); // Al |
| 2039 | if (fTOFHoles) { |
| 2040 | covpar[2] = (zlenA*0.5 - fgkInterCentrModBorder2)*0.5; |
| 2041 | gMC->Gsvolu("FCOB", "BOX ", idtmed[504], covpar, 3); // Al |
| 2042 | covpar[2] = fgkInterCentrModBorder2; |
| 2043 | gMC->Gsvolu("FCOP", "BOX ", idtmed[513], covpar, 3); // Plastic (CH2) |
| 2044 | } |
| 2045 | |
| dfef1a15 |
2046 | xcoor = 0.; |
| 57df6e96 |
2047 | ycoor = 12.5*0.5 - covpar[1]; |
| dfef1a15 |
2048 | zcoor = 0.; |
| 2049 | gMC->Gspos("FCOV", 0, "FAIA", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 57df6e96 |
2050 | if (fTOFHoles) { |
| 2051 | zcoor = (zlenA*0.5 + fgkInterCentrModBorder2)*0.5; |
| 2052 | gMC->Gspos("FCOB", 1, "FAIB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 2053 | gMC->Gspos("FCOB", 2, "FAIB", xcoor, ycoor, -zcoor, 0, "ONLY"); |
| 2054 | zcoor = 0.; |
| 2055 | gMC->Gspos("FCOP", 0, "FAIB", xcoor, ycoor, zcoor, 0, "ONLY"); |
| 2056 | } |
| 2057 | |
| 2058 | } |
| 2059 | |
| 2060 | //_____________________________________________________________________________ |
| 2061 | void AliTOFv6T0::MakeReadoutCrates(Float_t ytof) const |
| 2062 | { |
| 2063 | // Services Volumes |
| 2064 | |
| 2065 | // Empty crate weight: 50 Kg, electronics cards + cables ~ 52 Kg. |
| 2066 | // Per each side (A and C) the total weight is: 2x102 ~ 204 Kg. |
| 2067 | // ... + weight of the connection pannel for the steel cooling system (Cr 18%, Ni 12%, Fe 70%) |
| 2068 | // + other remaining elements + various supports |
| 2069 | |
| 2070 | // Each FEA card weight + all supports |
| 2071 | // (including all bolts and not including the cable connectors) |
| 2072 | // 353.1 g. |
| 2073 | // Per each strip there are 4 FEA cards, then |
| 2074 | // the total weight of the front-end electonics section is: 353.1 g x 4 = 1412.4 g. |
| dfef1a15 |
2075 | |
| 2076 | // Services Volumes |
| 2077 | |
| 2078 | // Empty crate weight: 50 Kg, electronics cards + cables ~ 52 Kg. |
| 2079 | // Per each side (A and C) the total weight is: 2x102 ~ 204 Kg. |
| 2080 | // ... + weight of the connection pannel for the steel cooling system (Cr 18%, Ni 12%, Fe 70%) |
| 2081 | // + other remaining elements + various supports |
| 2082 | |
| 2083 | // Each FEA card weight + all supports |
| 2084 | // (including all bolts and not including the cable connectors) |
| 2085 | // 353.1 g. |
| 2086 | // Per each strip there are 4 FEA cards, then |
| 2087 | // the total weight of the front-end electonics section is: 353.1 g x 4 = 1412.4 g. |
| 57df6e96 |
2088 | // |
| 2089 | |
| 2090 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 2091 | |
| 2092 | Int_t idrotm[18]; |
| dfef1a15 |
2093 | |
| 57df6e96 |
2094 | // volume definition |
| dfef1a15 |
2095 | Float_t serpar[3] = {29.*0.5, 121.*0.5, 90.*0.5}; |
| 57df6e96 |
2096 | gMC->Gsvolu("FTOS", "BOX ", idtmed[514], serpar, 3); // Al + Cu + steel |
| 2097 | |
| 2098 | Float_t xcoor, ycoor, zcoor; |
| dfef1a15 |
2099 | zcoor = (118.-90.)*0.5; |
| 2100 | Float_t phi = -10., ra = fTOFGeometry->Rmin() + ytof*0.5; |
| 2101 | for (Int_t i = 0; i < fTOFGeometry->NSectors(); i++) { |
| 2102 | phi += 20.; |
| 2103 | xcoor = ra * TMath::Cos(phi * kDegrad); |
| 2104 | ycoor = ra * TMath::Sin(phi * kDegrad); |
| 57df6e96 |
2105 | AliMatrix(idrotm[i], 90., phi, 90., phi + 270., 0., 0.); |
| 2106 | gMC->Gspos("FTOS", i, "BFMO", xcoor, ycoor, zcoor, idrotm[i], "ONLY"); |
| dfef1a15 |
2107 | } |
| 57df6e96 |
2108 | |
| dfef1a15 |
2109 | zcoor = (90. - 223.)*0.5; |
| 2110 | gMC->Gspos("FTOS", 1, "BBCE", ra, 0., zcoor, 0, "ONLY"); |
| 2111 | |
| 2112 | } |
| 57df6e96 |
2113 | |
| dfef1a15 |
2114 | //_____________________________________________________________________________ |
| 2115 | void AliTOFv6T0::DrawModule() const |
| 2116 | { |
| 2117 | // |
| 2118 | // Draw a shaded view of the Time Of Flight version 5 |
| 2119 | // |
| 2120 | |
| 2121 | // Set everything unseen |
| 2122 | gMC->Gsatt("*", "seen", -1); |
| 2123 | |
| 2124 | // |
| 2125 | //Set volumes visible |
| 2126 | // |
| 2127 | |
| 2128 | //Set ALIC mother transparent |
| 2129 | gMC->Gsatt("ALIC","SEEN", 0); |
| 2130 | |
| 2131 | //=====> Level 1 |
| 2132 | // Level 1 for TOF volumes |
| 2133 | gMC->Gsatt("B077","seen", 0); |
| 2134 | |
| 2135 | //=====> Level 2 |
| 2136 | // Level 2 for TOF volumes |
| 2137 | gMC->Gsatt("B071","seen", 0); |
| 2138 | gMC->Gsatt("B074","seen", 0); |
| 2139 | gMC->Gsatt("B075","seen", 0); |
| 2140 | gMC->Gsatt("B076","seen",-1); // all B076 sub-levels skipped - |
| 2141 | gMC->Gsatt("B080","seen", 0); // B080 does not has sub-level |
| 2142 | |
| 2143 | // Level 2 of B071 |
| 2144 | gMC->Gsatt("B056","seen", 0); // B056 does not has sub-levels - |
| 2145 | gMC->Gsatt("B063","seen",-1); // all B063 sub-levels skipped - |
| 2146 | gMC->Gsatt("B065","seen",-1); // all B065 sub-levels skipped - |
| 2147 | gMC->Gsatt("B067","seen",-1); // all B067 sub-levels skipped - |
| 2148 | gMC->Gsatt("B072","seen",-1); // all B072 sub-levels skipped - |
| 2149 | |
| 2150 | char name[16]; |
| 2151 | for (Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++) { |
| 2152 | sprintf(name, "BREF%d",isec); |
| 2153 | gMC->Gsatt(name,"seen", 0); // all BREF%d sub-levels skipped - |
| 2154 | sprintf(name, "BTRD%d",isec); |
| 2155 | gMC->Gsatt(name,"seen", 0); // all BTRD%d sub-levels skipped - |
| 2156 | sprintf(name, "BTOF%d",isec); |
| 2157 | gMC->Gsatt(name,"seen",-2); // all BTOF%d sub-levels skipped - |
| 2158 | } |
| 2159 | |
| 2160 | gMC->Gdopt("hide", "on"); |
| 2161 | gMC->Gdopt("shad", "on"); |
| 2162 | gMC->Gsatt("*", "fill", 7); |
| 2163 | gMC->SetClipBox("."); |
| 2164 | gMC->SetClipBox("*", 100, 1000, 100, 1000, 100, 1000); |
| 2165 | gMC->DefaultRange(); |
| 2166 | gMC->Gdraw("alic", 40, 30, 0, 10, 9.5, .018, .018); |
| 2167 | gMC->Gdhead(1111, "Time Of Flight"); |
| 2168 | gMC->Gdman(18, 3, "MAN"); |
| 2169 | gMC->Gdopt("hide","off"); |
| 2170 | } |
| 2171 | //_____________________________________________________________________________ |
| 2172 | void AliTOFv6T0::DrawDetectorModules() const |
| 2173 | { |
| 2174 | // |
| 2175 | // Draw a shaded view of the TOF detector SuperModules version 5 |
| 2176 | // |
| 2177 | |
| 2178 | // Set everything unseen |
| 2179 | gMC->Gsatt("*", "seen", -1); |
| 2180 | |
| 2181 | // |
| 2182 | //Set volumes visible |
| 2183 | // |
| 2184 | |
| 2185 | //Set ALIC mother transparent |
| 2186 | gMC->Gsatt("ALIC","SEEN", 0); |
| 2187 | |
| 2188 | //=====> Level 1 |
| 2189 | // Level 1 for TOF volumes |
| 2190 | gMC->Gsatt("B077","seen", 0); |
| 2191 | |
| 2192 | //=====> Level 2 |
| 2193 | // Level 2 for TOF volumes |
| 2194 | gMC->Gsatt("B071","seen", 0); |
| 2195 | gMC->Gsatt("B074","seen", 0); |
| 2196 | gMC->Gsatt("B075","seen", 0); |
| 2197 | gMC->Gsatt("B076","seen",-1); // all B076 sub-levels skipped - |
| 2198 | gMC->Gsatt("B080","seen", 0); // B080 does not has sub-level |
| 2199 | |
| 2200 | // Level 2 of B071 |
| 2201 | gMC->Gsatt("B056","seen", 0); // B056 does not has sub-levels - |
| 2202 | gMC->Gsatt("B063","seen",-1); // all B063 sub-levels skipped - |
| 2203 | gMC->Gsatt("B065","seen",-1); // all B065 sub-levels skipped - |
| 2204 | gMC->Gsatt("B067","seen",-1); // all B067 sub-levels skipped - |
| 2205 | gMC->Gsatt("B072","seen",-1); // all B072 sub-levels skipped - |
| 2206 | |
| 2207 | char name[16]; |
| 2208 | for (Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++) { |
| 2209 | sprintf(name, "BREF%d",isec); |
| 2210 | gMC->Gsatt(name,"seen", 0); // all BREF%d sub-levels skipped - |
| 2211 | sprintf(name, "BTRD%d",isec); |
| 2212 | gMC->Gsatt(name,"seen", 0); // all BTRD%d sub-levels skipped - |
| 2213 | sprintf(name, "BTOF%d",isec); |
| 2214 | gMC->Gsatt(name,"seen", 0); // all BTOF%d sub-levels skipped - |
| 2215 | } |
| 2216 | |
| 2217 | // Level 3 of B071, B075 and B074 |
| 2218 | gMC->Gsatt("FTOA","seen",-2); // all FTOA sub-levels skipped - |
| 2219 | if (fTOFHoles) gMC->Gsatt("FTOB","seen",-2); // all FTOB sub-levels skipped - |
| 2220 | if (fTOFHoles) gMC->Gsatt("FTOC","seen",-2); // all FTOC sub-levels skipped - |
| 2221 | |
| 2222 | // Level 3 of B071, B075 and B074 |
| 2223 | gMC->Gsatt("FAIA","seen",-1); // all FAIA sub-levels skipped - |
| 2224 | if (fTOFHoles) gMC->Gsatt("FAIB","seen",-1); // all FAIB sub-levels skipped - |
| 2225 | |
| 2226 | // Level 3 of B071, B075 and B074 |
| 57df6e96 |
2227 | gMC->Gsatt("FPEA","seen",-2/*1*/); // all FPEA sub-levels skipped - |
| 2228 | if (fTOFHoles) gMC->Gsatt("FPEB","seen",-2/*1*/); // all FPEB sub-levels skipped - |
| dfef1a15 |
2229 | |
| 2230 | gMC->Gdopt("hide","on"); |
| 2231 | gMC->Gdopt("shad","on"); |
| 2232 | gMC->Gsatt("*", "fill", 5); |
| 2233 | gMC->SetClipBox("."); |
| 2234 | gMC->SetClipBox("*", 100, 1000, 100, 1000, 0, 1000); |
| 2235 | gMC->DefaultRange(); |
| 2236 | gMC->Gdraw("alic", 40, 30, 0, 10, 9.5, .018, .018); |
| 2237 | gMC->Gdhead(1111,"TOF detector"); |
| 2238 | gMC->Gdman(18, 3, "MAN"); |
| 2239 | gMC->Gdopt("hide","off"); |
| 2240 | } |
| 2241 | |
| 2242 | //_____________________________________________________________________________ |
| 2243 | void AliTOFv6T0::DrawDetectorStrips() const |
| 2244 | { |
| 2245 | // |
| 2246 | // Draw a shaded view of the TOF strips for version 5 |
| 2247 | // |
| 2248 | |
| 2249 | // Set everything unseen |
| 2250 | gMC->Gsatt("*", "seen", -1); |
| 2251 | |
| 2252 | // |
| 2253 | //Set volumes visible |
| 2254 | // |
| 2255 | |
| 2256 | //Set ALIC mother transparent |
| 2257 | gMC->Gsatt("ALIC","SEEN", 0); |
| 2258 | |
| 2259 | //=====> Level 1 |
| 2260 | // Level 1 for TOF volumes |
| 2261 | gMC->Gsatt("B077","seen", 0); |
| 2262 | |
| 2263 | //=====> Level 2 |
| 2264 | // Level 2 for TOF volumes |
| 2265 | gMC->Gsatt("B071","seen", 0); |
| 2266 | gMC->Gsatt("B074","seen", 0); |
| 2267 | gMC->Gsatt("B075","seen", 0); |
| 2268 | gMC->Gsatt("B076","seen",-1); // all B076 sub-levels skipped - |
| 2269 | gMC->Gsatt("B080","seen", 0); // B080 does not has sub-level |
| 2270 | |
| 2271 | // Level 2 of B071 |
| 2272 | gMC->Gsatt("B063","seen",-1); // all B063 sub-levels skipped - |
| 2273 | gMC->Gsatt("B065","seen",-1); // all B065 sub-levels skipped - |
| 2274 | gMC->Gsatt("B067","seen",-1); // all B067 sub-levels skipped - |
| 2275 | gMC->Gsatt("B056","seen", 0); // B056 does not has sub-levels - |
| 2276 | gMC->Gsatt("B072","seen",-1); // all B072 sub-levels skipped - |
| 2277 | |
| 2278 | char name[16]; |
| 2279 | for (Int_t isec=0; isec<fTOFGeometry->NSectors(); isec++) { |
| 2280 | sprintf(name, "BREF%d",isec); |
| 2281 | gMC->Gsatt(name,"seen", 0); // all BREF%d sub-levels skipped - |
| 2282 | sprintf(name, "BTRD%d",isec); |
| 2283 | gMC->Gsatt(name,"seen", 0); // all BTRD%d sub-levels skipped - |
| 2284 | sprintf(name, "BTOF%d",isec); |
| 2285 | gMC->Gsatt(name,"seen", 0); // all BTOF%d sub-levels skipped - |
| 2286 | } |
| 2287 | |
| 2288 | // Level 3 of B071, B074 and B075 |
| 2289 | gMC->Gsatt("FTOA","SEEN", 0); |
| 2290 | if (fTOFHoles) gMC->Gsatt("FTOB","SEEN", 0); |
| 2291 | if (fTOFHoles) gMC->Gsatt("FTOC","SEEN", 0); |
| 2292 | |
| 2293 | // Level 4 of B071, B074 and B075 |
| 2294 | gMC->Gsatt("FLTA","SEEN", 0); |
| 2295 | if (fTOFHoles) gMC->Gsatt("FLTB","SEEN", 0); |
| 2296 | if (fTOFHoles) gMC->Gsatt("FLTC","SEEN", 0); |
| 2297 | |
| 2298 | // Level 5 of B071, B074 and B075 |
| 2299 | gMC->Gsatt("FAIA","SEEN", 0); |
| 2300 | if (fTOFHoles) gMC->Gsatt("FAIB","SEEN", 0); |
| 2301 | |
| 57df6e96 |
2302 | gMC->Gsatt("FPEA","SEEN", -2/*1*/); |
| 2303 | if (fTOFHoles) gMC->Gsatt("FPEB","SEEN", -2/*1*/); |
| dfef1a15 |
2304 | |
| 2305 | gMC->Gsatt("FSTR","SEEN",-2); // all FSTR sub-levels skipped - |
| 2306 | |
| 2307 | gMC->Gsatt("FWZ1","SEEN", 1); |
| 2308 | gMC->Gsatt("FWZ2","SEEN", 1); |
| 2309 | gMC->Gsatt("FWZ3","SEEN", 1); |
| 2310 | gMC->Gsatt("FWZ4","SEEN", 1); |
| 57df6e96 |
2311 | if (fTOFHoles) { |
| 2312 | gMC->Gsatt("FWZA","SEEN", 1); |
| 2313 | gMC->Gsatt("FWZB","SEEN", 1); |
| 2314 | gMC->Gsatt("FWZC","SEEN", 1); |
| 2315 | } |
| dfef1a15 |
2316 | |
| 2317 | // Level 2 of FAIA |
| 2318 | // Level 2 of FAIB |
| 2319 | gMC->Gsatt("FCA1","SEEN", 0); |
| 2320 | gMC->Gsatt("FCA2","SEEN", 0); |
| 2321 | gMC->Gsatt("FCAB","SEEN", 0); |
| 57df6e96 |
2322 | gMC->Gsatt("FCAL","SEEN", 0); |
| dfef1a15 |
2323 | gMC->Gsatt("FTUB","SEEN",-1); // all FTUB sub-levels skipped - |
| 2324 | gMC->Gsatt("FTLN","SEEN", 0); |
| 2325 | gMC->Gsatt("FLTN","SEEN", 0); |
| 2326 | gMC->Gsatt("FCBL","SEEN", 0); |
| 57df6e96 |
2327 | if (fTOFHoles) gMC->Gsatt("FCBB","SEEN", 0); |
| dfef1a15 |
2328 | gMC->Gsatt("FSAW","SEEN", 0); |
| 2329 | gMC->Gsatt("FCOV","SEEN", 0); |
| 57df6e96 |
2330 | if (fTOFHoles) { |
| 2331 | gMC->Gsatt("FCOB","SEEN", 0); |
| 2332 | gMC->Gsatt("FCOP","SEEN", 0); |
| 2333 | } |
| dfef1a15 |
2334 | |
| 2335 | // Level 2 of FTUB |
| 2336 | gMC->Gsatt("FITU","SEEN", 0); |
| 2337 | |
| 2338 | // Level 2 of FSTR |
| 2339 | gMC->Gsatt("FHON","SEEN", 1); |
| 2340 | gMC->Gsatt("FPC1","SEEN", 1); |
| 2341 | gMC->Gsatt("FPC2","SEEN", 1); |
| 2342 | gMC->Gsatt("FPCB","SEEN", 1); |
| 2343 | gMC->Gsatt("FRGL","SEEN", 1); |
| 2344 | gMC->Gsatt("FGLF","SEEN", 1); |
| 2345 | |
| 2346 | // Level 2 of FPCB => Level 3 of FSTR |
| 2347 | gMC->Gsatt("FSEN","SEEN", 0); |
| 2348 | gMC->Gsatt("FSEZ","SEEN", 0); |
| 2349 | gMC->Gsatt("FPAD","SEEN", 1); |
| 2350 | |
| 2351 | gMC->Gdopt("hide","on"); |
| 2352 | gMC->Gdopt("shad","on"); |
| 2353 | gMC->Gsatt("*", "fill", 5); |
| 2354 | gMC->SetClipBox("."); |
| 2355 | gMC->SetClipBox("*", 0, 1000, 0, 1000, 0, 1000); |
| 2356 | gMC->DefaultRange(); |
| 2357 | gMC->Gdraw("alic", 40, 30, 0, 10, 9.5, .018, .018); |
| 2358 | gMC->Gdhead(1111,"TOF Strips"); |
| 2359 | gMC->Gdman(18, 3, "MAN"); |
| 2360 | gMC->Gdopt("hide","off"); |
| 2361 | } |
| 2362 | |
| 2363 | //_____________________________________________________________________________ |
| 2364 | void AliTOFv6T0::CreateMaterials() |
| 2365 | { |
| 2366 | // |
| 2367 | // Define materials for the Time Of Flight |
| 2368 | // |
| 2369 | |
| 2370 | //AliTOF::CreateMaterials(); |
| 2371 | |
| 2372 | AliMagF *magneticField = (AliMagF*)gAlice->Field(); |
| 2373 | |
| 2374 | Int_t isxfld = magneticField->Integ(); |
| 2375 | Float_t sxmgmx = magneticField->Max(); |
| 2376 | |
| 57df6e96 |
2377 | //--- Quartz (SiO2) --- |
| 2378 | Float_t aq[2] = { 28.0855,15.9994}; |
| dfef1a15 |
2379 | Float_t zq[2] = { 14.,8. }; |
| 2380 | Float_t wq[2] = { 1.,2. }; |
| 57df6e96 |
2381 | Float_t dq = 2.7; // (+5.9%) |
| dfef1a15 |
2382 | Int_t nq = -2; |
| 2383 | |
| 57df6e96 |
2384 | // --- Nomex (C14H22O2N2) --- |
| 2385 | Float_t anox[4] = {12.011,1.00794,15.9994,14.00674}; |
| dfef1a15 |
2386 | Float_t znox[4] = { 6., 1., 8., 7.}; |
| 2387 | Float_t wnox[4] = {14., 22., 2., 2.}; |
| 2388 | //Float_t dnox = 0.048; //old value |
| 2389 | Float_t dnox = 0.22; // (x 4.6) |
| 2390 | Int_t nnox = -4; |
| 2391 | |
| 57df6e96 |
2392 | // --- G10 {Si, O, C, H, O} --- |
| 2393 | Float_t we[7], na[7]; |
| 2394 | |
| 2395 | Float_t ag10[5] = {28.0855,15.9994,12.011,1.00794,15.9994}; |
| dfef1a15 |
2396 | Float_t zg10[5] = {14., 8., 6., 1., 8.}; |
| 2397 | Float_t wmatg10[5]; |
| 2398 | Int_t nlmatg10 = 5; |
| 2399 | na[0]= 1. , na[1]= 2. , na[2]= 0. , na[3]= 0. , na[4]= 0.; |
| 2400 | MaterialMixer(we,ag10,na,5); |
| 2401 | wmatg10[0]= we[0]*0.6; |
| 2402 | wmatg10[1]= we[1]*0.6; |
| 2403 | na[0]= 0. , na[1]= 0. , na[2]= 14. , na[3]= 20. , na[4]= 3.; |
| 2404 | MaterialMixer(we,ag10,na,5); |
| 2405 | wmatg10[2]= we[2]*0.4; |
| 2406 | wmatg10[3]= we[3]*0.4; |
| 2407 | wmatg10[4]= we[4]*0.4; |
| 2408 | AliDebug(1,Form("wg10 %d %d %d %d %d", wmatg10[0], wmatg10[1], wmatg10[2], wmatg10[3], wmatg10[4])); |
| 57df6e96 |
2409 | //Float_t densg10 = 1.7; //old value |
| e41ca6a9 |
2410 | Float_t densg10 = 2.0; // (+17.8%) |
| dfef1a15 |
2411 | |
| 57df6e96 |
2412 | // --- Water --- |
| 2413 | Float_t awa[2] = { 1.00794, 15.9994 }; |
| dfef1a15 |
2414 | Float_t zwa[2] = { 1., 8. }; |
| 2415 | Float_t wwa[2] = { 2., 1. }; |
| 2416 | Float_t dwa = 1.0; |
| 2417 | Int_t nwa = -2; |
| 2418 | |
| 57df6e96 |
2419 | // --- Air --- |
| 2420 | Float_t aAir[4]={12.011,14.00674,15.9994,39.948}; |
| dfef1a15 |
2421 | Float_t zAir[4]={6.,7.,8.,18.}; |
| 2422 | Float_t wAir[4]={0.000124,0.755267,0.231781,0.012827}; |
| 2423 | Float_t dAir = 1.20479E-3; |
| 2424 | |
| 57df6e96 |
2425 | // --- Fibre Glass --- |
| 2426 | Float_t afg[4] = {28.0855,15.9994,12.011,1.00794}; |
| dfef1a15 |
2427 | Float_t zfg[4] = {14., 8., 6., 1.}; |
| 2428 | Float_t wfg[4] = {0.12906,0.29405,0.51502,0.06187}; |
| 2429 | //Float_t dfg = 1.111; |
| 57df6e96 |
2430 | Float_t dfg = 2.05; // (x1.845) |
| dfef1a15 |
2431 | Int_t nfg = 4; |
| 2432 | |
| 57df6e96 |
2433 | // --- Freon C2F4H2 + SF6 --- |
| 2434 | Float_t afre[4] = {12.011,1.00794,18.9984032,32.0065}; |
| 2435 | Float_t zfre[4] = { 6., 1., 9., 16.}; |
| 2436 | Float_t wfre[4] = {0.21250,0.01787,0.74827,0.021355}; |
| 2437 | Float_t densfre = 0.00375; |
| dfef1a15 |
2438 | Int_t nfre = 4; |
| 2439 | |
| 57df6e96 |
2440 | // --- Cables and tubes {Al, Cu} --- |
| 2441 | Float_t acbt[2] = {26.981539,63.546}; |
| 2442 | Float_t zcbt[2] = {13., 29.}; |
| 2443 | Float_t wcbt[2] = {0.407,0.593}; |
| 2444 | Float_t decbt = 0.68; |
| 2445 | |
| 2446 | // --- Cable {CH2, Al, Cu} --- |
| 2447 | Float_t asc[4] = {12.011, 1.00794, 26.981539,63.546}; |
| 2448 | Float_t zsc[4] = { 6., 1., 13., 29.}; |
| 2449 | Float_t wsc[4]; |
| 2450 | for (Int_t ii=0; ii<4; ii++) wsc[ii]=0.; |
| 2451 | |
| 2452 | Float_t wDummy[4], nDummy[4]; |
| 2453 | for (Int_t ii=0; ii<4; ii++) wDummy[ii]=0.; |
| 2454 | for (Int_t ii=0; ii<4; ii++) nDummy[ii]=0.; |
| 2455 | nDummy[0] = 1.; |
| 2456 | nDummy[1] = 2.; |
| 2457 | MaterialMixer(wDummy,asc,nDummy,2); |
| 2458 | wsc[0] = 0.4375*wDummy[0]; |
| 2459 | wsc[1] = 0.4375*wDummy[1]; |
| 2460 | wsc[2] = 0.3244; |
| 2461 | wsc[3] = 0.2381; |
| 2462 | Float_t dsc = 1.223; |
| 2463 | |
| 2464 | // --- Crates boxes {Al, Cu, Fe, Cr, Ni} --- |
| 2465 | Float_t acra[5]= {26.981539,63.546,55.845,51.9961,58.6934}; |
| dfef1a15 |
2466 | Float_t zcra[5]= {13., 29., 26., 24., 28.}; |
| 2467 | Float_t wcra[5]= {0.7,0.2,0.07,0.018,0.012}; |
| 2468 | Float_t dcra = 0.77; |
| 2469 | |
| 57df6e96 |
2470 | // --- Polietilene CH2 --- |
| 2471 | Float_t aPlastic[2] = {12.011, 1.00794}; |
| 2472 | Float_t zPlastic[2] = { 6., 1.}; |
| 2473 | Float_t wPlastic[2] = { 1., 2.}; |
| 2474 | //Float_t dPlastic = 0.92; // PDB value |
| 2475 | Float_t dPlastic = 0.93; // (~+1.1%) |
| 2476 | Int_t nwPlastic = -2; |
| 2477 | |
| dfef1a15 |
2478 | AliMixture ( 0, "Air$", aAir, zAir, dAir, 4, wAir); |
| 2479 | AliMixture ( 1, "Nomex$", anox, znox, dnox, nnox, wnox); |
| 2480 | AliMixture ( 2, "G10$", ag10, zg10, densg10, nlmatg10, wmatg10); |
| 2481 | AliMixture ( 3, "fibre glass$", afg, zfg, dfg, nfg, wfg); |
| 57df6e96 |
2482 | AliMaterial( 4, "Al $", 26.981539, 13., 2.7, -8.9, 999.); |
| 2483 | Float_t factor = 0.4/1.5*2./3.; |
| 2484 | AliMaterial( 5, "Al honeycomb$", 26.981539, 13., 2.7*factor, -8.9/factor, 999.); |
| dfef1a15 |
2485 | AliMixture ( 6, "Freon$", afre, zfre, densfre, nfre, wfre); |
| 2486 | AliMixture ( 7, "Glass$", aq, zq, dq, nq, wq); |
| 57df6e96 |
2487 | AliMixture ( 8, "Water$", awa, zwa, dwa, nwa, wwa); |
| 2488 | AliMixture ( 9, "cables+tubes$", acbt, zcbt, decbt, 2, wcbt); |
| 2489 | AliMaterial(10, "Cu $", 63.546, 29., 8.96, -1.43, 999.); |
| 2490 | AliMixture (11, "cable$", asc, zsc, dsc, 4, wsc); |
| 2491 | AliMixture (12, "Al+Cu+steel$", acra, zcra, dcra, 5, wcra); |
| 2492 | AliMixture (13, "plastic$", aPlastic, zPlastic, dPlastic, nwPlastic, wPlastic); |
| 2493 | Float_t factorHoles = 1./36.5; |
| 2494 | AliMaterial(14, "Al honey for holes$", 26.981539, 13., 2.7*factorHoles, -8.9/factorHoles, 999.); |
| dfef1a15 |
2495 | |
| 2496 | Float_t epsil, stmin, deemax, stemax; |
| 2497 | |
| 2498 | // STD data |
| 2499 | // EPSIL = 0.1 ! Tracking precision, |
| 2500 | // STEMAX = 0.1 ! Maximum displacement for multiple scattering |
| 2501 | // DEEMAX = 0.1 ! Maximum fractional energy loss, DLS |
| 2502 | // STMIN = 0.1 |
| 2503 | |
| 2504 | // TOF data |
| 2505 | epsil = .001; // Tracking precision, |
| 2506 | stemax = -1.; // Maximum displacement for multiple scattering |
| 2507 | deemax = -.3; // Maximum fractional energy loss, DLS |
| 2508 | stmin = -.8; |
| 2509 | |
| 57df6e96 |
2510 | AliMedium( 1,"Air$", 0, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| dfef1a15 |
2511 | AliMedium( 2,"Nomex$", 1, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2512 | AliMedium( 3,"G10$", 2, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2513 | AliMedium( 4,"fibre glass$", 3, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 57df6e96 |
2514 | AliMedium( 5,"Al Frame$", 4, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2515 | AliMedium( 6,"honeycomb$", 5, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2516 | AliMedium( 7,"Fre$", 6, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2517 | AliMedium( 8,"Cu-S$", 10, 1, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2518 | AliMedium( 9,"Glass$", 7, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2519 | AliMedium(10,"Water$", 8, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2520 | AliMedium(11,"Cable$", 11, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2521 | AliMedium(12,"Cables+Tubes$", 9, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2522 | AliMedium(13,"Copper$", 10, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2523 | AliMedium(14,"Plastic$", 13, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2524 | AliMedium(15,"Crates$", 12, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| 2525 | AliMedium(16,"honey_holes$", 14, 0, isxfld, sxmgmx, 10., stemax, deemax, epsil, stmin); |
| dfef1a15 |
2526 | |
| 2527 | } |
| 2528 | //_____________________________________________________________________________ |
| 2529 | void AliTOFv6T0::Init() |
| 2530 | { |
| 2531 | // |
| 2532 | // Initialise the detector after the geometry has been defined |
| 2533 | // |
| 2534 | AliDebug(1, "**************************************" |
| 2535 | " TOF " |
| 2536 | "**************************************"); |
| 2537 | AliDebug(1, " Version 4 of TOF initialing, " |
| 2538 | "symmetric TOF - Full Coverage version"); |
| 2539 | |
| 2540 | AliTOF::Init(); |
| 2541 | |
| 2542 | fIdFTOA = gMC->VolId("FTOA"); |
| 2543 | if (fTOFHoles) { |
| 2544 | fIdFTOB = gMC->VolId("FTOB"); |
| 2545 | fIdFTOC = gMC->VolId("FTOC"); |
| 2546 | } |
| 2547 | fIdFLTA = gMC->VolId("FLTA"); |
| 2548 | if (fTOFHoles) { |
| 2549 | fIdFLTB = gMC->VolId("FLTB"); |
| 2550 | fIdFLTC = gMC->VolId("FLTC"); |
| 2551 | } |
| 2552 | |
| 2553 | AliDebug(1, "**************************************" |
| 2554 | " TOF " |
| 2555 | "**************************************"); |
| 2556 | } |
| 2557 | |
| 2558 | //_____________________________________________________________________________ |
| 2559 | void AliTOFv6T0::StepManager() |
| 2560 | { |
| 2561 | |
| 2562 | // |
| 2563 | // Procedure called at each step in the Time Of Flight |
| 2564 | // |
| 2565 | |
| 2566 | TLorentzVector mom, pos; |
| 2567 | Float_t xm[3],pm[3],xpad[3],ppad[3]; |
| 2568 | Float_t hits[14]; |
| 2569 | Int_t vol[5]; |
| 2570 | Int_t sector, plate, padx, padz, strip; |
| 2571 | Int_t copy, padzid, padxid, stripid, i; |
| 2572 | Int_t *idtmed = fIdtmed->GetArray()-499; |
| 2573 | Float_t incidenceAngle; |
| 2574 | |
| 2575 | const char* volpath; |
| 2576 | |
| 2577 | Int_t index = 0; |
| 2578 | |
| 2579 | if( |
| 2580 | gMC->IsTrackEntering() |
| 2581 | && gMC->TrackCharge() |
| 57df6e96 |
2582 | //&& gMC->GetMedium()==idtmed[507] |
| 2583 | && gMC->CurrentMedium()==idtmed[507] |
| dfef1a15 |
2584 | && gMC->CurrentVolID(copy)==fIdSens |
| 2585 | ) |
| 2586 | { |
| 2587 | |
| 2588 | AliMC *mcApplication = (AliMC*)gAlice->GetMCApp(); |
| 2589 | |
| 57df6e96 |
2590 | //AddTrackReference(mcApplication->GetCurrentTrackNumber(), AliTrackReference::kTOF); |
| 2591 | AddTrackReference(mcApplication->GetCurrentTrackNumber()); |
| dfef1a15 |
2592 | |
| 2593 | // getting information about hit volumes |
| 2594 | |
| 2595 | padzid=gMC->CurrentVolOffID(1,copy); |
| 2596 | padz=copy; |
| 2597 | padz--; |
| 2598 | |
| 2599 | padxid=gMC->CurrentVolOffID(0,copy); |
| 2600 | padx=copy; |
| 2601 | padx--; |
| 2602 | |
| 2603 | stripid=gMC->CurrentVolOffID(4,copy); |
| 2604 | strip=copy; |
| 2605 | strip--; |
| 2606 | |
| 2607 | gMC->TrackPosition(pos); |
| 2608 | gMC->TrackMomentum(mom); |
| 2609 | |
| 2610 | Double_t normMom=1./mom.Rho(); |
| 2611 | |
| 2612 | // getting the coordinates in pad ref system |
| 2613 | |
| 2614 | xm[0] = (Float_t)pos.X(); |
| 2615 | xm[1] = (Float_t)pos.Y(); |
| 2616 | xm[2] = (Float_t)pos.Z(); |
| 2617 | |
| 2618 | pm[0] = (Float_t)mom.X()*normMom; |
| 2619 | pm[1] = (Float_t)mom.Y()*normMom; |
| 2620 | pm[2] = (Float_t)mom.Z()*normMom; |
| 2621 | |
| 2622 | gMC->Gmtod(xm,xpad,1); // from MRS to DRS: coordinates convertion |
| 2623 | gMC->Gmtod(pm,ppad,2); // from MRS to DRS: direction cosinus convertion |
| 2624 | |
| 2625 | |
| 2626 | if (TMath::Abs(ppad[1])>1) { |
| 2627 | AliWarning("Abs(ppad) > 1"); |
| 2628 | ppad[1]=TMath::Sign((Float_t)1,ppad[1]); |
| 2629 | } |
| 2630 | incidenceAngle = TMath::ACos(ppad[1])*kRaddeg; |
| 2631 | |
| 2632 | plate = -1; |
| 2633 | if (strip < fTOFGeometry->NStripC()) { |
| 2634 | plate = 0; |
| 2635 | //strip = strip; |
| 2636 | } |
| 2637 | else if (strip >= fTOFGeometry->NStripC() && |
| 2638 | strip < fTOFGeometry->NStripC() + fTOFGeometry->NStripB()) { |
| 2639 | plate = 1; |
| 2640 | strip = strip - fTOFGeometry->NStripC(); |
| 2641 | } |
| 2642 | else if (strip >= fTOFGeometry->NStripC() + fTOFGeometry->NStripB() && |
| 2643 | strip < fTOFGeometry->NStripC() + fTOFGeometry->NStripB() + fTOFGeometry->NStripA()) { |
| 2644 | plate = 2; |
| 2645 | strip = strip - fTOFGeometry->NStripC() - fTOFGeometry->NStripB(); |
| 2646 | } |
| 2647 | else if (strip >= fTOFGeometry->NStripC() + fTOFGeometry->NStripB() + fTOFGeometry->NStripA() && |
| 2648 | strip < fTOFGeometry->NStripC() + fTOFGeometry->NStripB() + fTOFGeometry->NStripA() + fTOFGeometry->NStripB()) { |
| 2649 | plate = 3; |
| 2650 | strip = strip - fTOFGeometry->NStripC() - fTOFGeometry->NStripB() - fTOFGeometry->NStripA(); |
| 2651 | } |
| 2652 | else { |
| 2653 | plate = 4; |
| 2654 | strip = strip - fTOFGeometry->NStripC() - fTOFGeometry->NStripB() - fTOFGeometry->NStripA() - fTOFGeometry->NStripB(); |
| 2655 | } |
| 2656 | |
| 2657 | volpath=gMC->CurrentVolOffName(7); |
| 2658 | index=atoi(&volpath[4]); |
| 2659 | sector=-1; |
| 2660 | sector=index; |
| 2661 | |
| 2662 | //Old 6h convention |
| 2663 | // if(index<5){ |
| 2664 | // sector=index+13; |
| 2665 | // } |
| 2666 | // else{ |
| 2667 | // sector=index-5; |
| 2668 | // } |
| 2669 | |
| 2670 | for(i=0;i<3;++i) { |
| 2671 | hits[i] = pos[i]; |
| 2672 | hits[i+3] = pm[i]; |
| 2673 | } |
| 2674 | |
| 2675 | hits[6] = mom.Rho(); |
| 2676 | hits[7] = pos[3]; |
| 2677 | hits[8] = xpad[0]; |
| 2678 | hits[9] = xpad[1]; |
| 2679 | hits[10]= xpad[2]; |
| 2680 | hits[11]= incidenceAngle; |
| 2681 | hits[12]= gMC->Edep(); |
| 2682 | hits[13]= gMC->TrackLength(); |
| 2683 | |
| 2684 | vol[0]= sector; |
| 2685 | vol[1]= plate; |
| 2686 | vol[2]= strip; |
| 2687 | vol[3]= padx; |
| 2688 | vol[4]= padz; |
| 2689 | |
| 2690 | AddT0Hit(mcApplication->GetCurrentTrackNumber(),vol, hits); |
| 2691 | //AddT0Hit(gAlice->GetMCApp()->GetCurrentTrackNumber(),vol, hits); |
| 2692 | } |
| 2693 | } |
| 2694 | //------------------------------------------------------------------- |
| 2695 | void AliTOFv6T0::MaterialMixer(Float_t* p,Float_t* a,Float_t* m,Int_t n) const |
| 2696 | { |
| 2697 | // a[] atomic weights vector (in) |
| 2698 | // (atoms present in more compound appear separately) |
| 2699 | // m[] number of corresponding atoms in the compound (in) |
| 2700 | Float_t t = 0.; |
| 2701 | for (Int_t i = 0; i < n; ++i) { |
| 2702 | p[i] = a[i]*m[i]; |
| 2703 | t += p[i]; |
| 2704 | } |
| 2705 | for (Int_t i = 0; i < n; ++i) { |
| 2706 | p[i] = p[i]/t; |
| 2707 | //AliDebug(1,Form((\n weight[%i] = %f (,i,p[i])); |
| 2708 | } |
| 2709 | } |
git://git.uio.no / u / mrichter / AliRoot.git / blame