| a9e2aefa |
1 | /************************************************************************** |
| 2 | * Copyright(c) 1998-1999, ALICE Experiment at CERN, All rights reserved. * |
| 3 | * * |
| 4 | * Author: The ALICE Off-line Project. * |
| 5 | * Contributors are mentioned in the code where appropriate. * |
| 6 | * * |
| 7 | * Permission to use, copy, modify and distribute this software and its * |
| 8 | * documentation strictly for non-commercial purposes is hereby granted * |
| 9 | * without fee, provided that the above copyright notice appears in all * |
| 10 | * copies and that both the copyright notice and this permission notice * |
| 11 | * appear in the supporting documentation. The authors make no claims * |
| 2c799aa2 |
12 | * about the suitability of this software for any purpeateose. It is * |
| a9e2aefa |
13 | * provided "as is" without express or implied warranty. * |
| 14 | **************************************************************************/ |
| 15 | |
| 16 | /* |
| 17 | $Log$ |
| 2724ae40 |
18 | Revision 1.28 2001/05/16 14:57:17 alibrary |
| 19 | New files for folders and Stack |
| 20 | |
| 9e1a0ddb |
21 | Revision 1.27 2001/04/06 11:24:43 morsch |
| 22 | Dependency on implementations of AliSegmentation and AliMUONResponse moved to AliMUONFactory class. |
| 23 | Static method Build() builds the MUON system out of chambers, segmentation and response. |
| 24 | |
| be3bb6c1 |
25 | Revision 1.26 2001/03/17 10:07:20 morsch |
| 26 | Correct inconsistent variable name / method name / comments. |
| 27 | |
| 2eb55fab |
28 | Revision 1.25 2001/03/16 15:32:06 morsch |
| 29 | Corrections of overlap with beam shield and dipole (A. de Falco) |
| 30 | |
| 21a18f36 |
31 | Revision 1.24 2001/03/14 17:22:15 pcrochet |
| 32 | Geometry of the trigger chambers : a vertical gap of has been introduced around x=0 according fig.3.27 of the TDR (P.Dupieux) |
| 33 | |
| 236fe2c5 |
34 | Revision 1.23 2001/01/18 15:23:49 egangler |
| 35 | Bug correction in StepManager : |
| 36 | Now the systematic offset with angle is cured |
| 37 | |
| e0f71fb7 |
38 | Revision 1.22 2001/01/17 21:01:21 hristov |
| 39 | Unused variable removed |
| 40 | |
| a7e8b51a |
41 | Revision 1.21 2000/12/20 13:00:22 egangler |
| 42 | |
| 43 | Added charge correlation between cathods. |
| 44 | In Config_slat.C, use |
| 45 | MUON->Chamber(chamber-1).SetChargeCorrel(0.11); to set the RMS of |
| 46 | q1/q2 to 11 % (number from Alberto) |
| 47 | This is stored in AliMUONChamber fChargeCorrel member. |
| 48 | At generation time, when a tracks enters the volume, |
| 49 | AliMUONv1::StepManager calls |
| 50 | AliMUONChamber::ChargeCorrelationInit() to set the current value of |
| 51 | fCurrentCorrel which is then used at Disintegration level to scale |
| 52 | appropriately the PadHit charges. |
| 53 | |
| 681d067b |
54 | Revision 1.20 2000/12/04 17:48:23 gosset |
| 55 | Modifications for stations 1 et 2 mainly: |
| 56 | * station 1 with 4 mm gas gap and smaller cathode segmentation... |
| 57 | * stations 1 and 2 with "grey" frame crosses |
| 58 | * mean noise at 1.5 ADC channel |
| 59 | * Ar-CO2 gas (80%+20%) |
| 60 | |
| b64652f5 |
61 | Revision 1.19 2000/12/02 17:15:46 morsch |
| 62 | Correction of dead zones in inner regions of stations 3-5 |
| 63 | Correction of length of slats 3 and 9 of station 4. |
| 64 | |
| a083207d |
65 | Revision 1.17 2000/11/24 12:57:10 morsch |
| 66 | New version of geometry for stations 3-5 "Slats" (A. de Falco) |
| 67 | - sensitive region at station 3 inner radius |
| 68 | - improved volume tree structure |
| 69 | |
| 3c084d9f |
70 | Revision 1.16 2000/11/08 13:01:40 morsch |
| 71 | Chamber half-planes of stations 3-5 at different z-positions. |
| 72 | |
| e1ad7d45 |
73 | Revision 1.15 2000/11/06 11:39:02 morsch |
| 74 | Bug in StepManager() corrected. |
| 75 | |
| e3cf5faa |
76 | Revision 1.14 2000/11/06 09:16:50 morsch |
| 77 | Avoid overlap of slat volumes. |
| 78 | |
| 2c799aa2 |
79 | Revision 1.13 2000/10/26 07:33:44 morsch |
| 80 | Correct x-position of slats in station 5. |
| 81 | |
| 8013c580 |
82 | Revision 1.12 2000/10/25 19:55:35 morsch |
| 83 | Switches for each station individually for debug and lego. |
| 84 | |
| b17c0c87 |
85 | Revision 1.11 2000/10/22 16:44:01 morsch |
| 86 | Update of slat geometry for stations 3,4,5 (A. deFalco) |
| 87 | |
| f9f7c205 |
88 | Revision 1.10 2000/10/12 16:07:04 gosset |
| 89 | StepManager: |
| 90 | * SigGenCond only called for tracking chambers, |
| 91 | hence no more division by 0, |
| 92 | and may use last ALIROOT/dummies.C with exception handling; |
| 93 | * "10" replaced by "AliMUONConstants::NTrackingCh()". |
| 94 | |
| a75f073c |
95 | Revision 1.9 2000/10/06 15:37:22 morsch |
| 96 | Problems with variable redefinition in for-loop solved. |
| 97 | Variable names starting with u-case letters changed to l-case. |
| 98 | |
| 6c5ddcfa |
99 | Revision 1.8 2000/10/06 09:06:31 morsch |
| 100 | Include Slat chambers (stations 3-5) into geometry (A. de Falco) |
| 101 | |
| 1e8fff9c |
102 | Revision 1.7 2000/10/02 21:28:09 fca |
| 103 | Removal of useless dependecies via forward declarations |
| 104 | |
| 94de3818 |
105 | Revision 1.6 2000/10/02 17:20:45 egangler |
| 106 | Cleaning of the code (continued ) : |
| 107 | -> coding conventions |
| 108 | -> void Streamers |
| 109 | -> some useless includes removed or replaced by "class" statement |
| 110 | |
| 8c449e83 |
111 | Revision 1.5 2000/06/28 15:16:35 morsch |
| 112 | (1) Client code adapted to new method signatures in AliMUONSegmentation (see comments there) |
| 113 | to allow development of slat-muon chamber simulation and reconstruction code in the MUON |
| 114 | framework. The changes should have no side effects (mostly dummy arguments). |
| 115 | (2) Hit disintegration uses 3-dim hit coordinates to allow simulation |
| 116 | of chambers with overlapping modules (MakePadHits, Disintegration). |
| 117 | |
| 802a864d |
118 | Revision 1.4 2000/06/26 14:02:38 morsch |
| 119 | Add class AliMUONConstants with MUON specific constants using static memeber data and access methods. |
| 120 | |
| f665c1ea |
121 | Revision 1.3 2000/06/22 14:10:05 morsch |
| 122 | HP scope problems corrected (PH) |
| 123 | |
| e17592e9 |
124 | Revision 1.2 2000/06/15 07:58:49 morsch |
| 125 | Code from MUON-dev joined |
| 126 | |
| a9e2aefa |
127 | Revision 1.1.2.14 2000/06/14 14:37:25 morsch |
| 128 | Initialization of TriggerCircuit added (PC) |
| 129 | |
| 130 | Revision 1.1.2.13 2000/06/09 21:55:47 morsch |
| 131 | Most coding rule violations corrected. |
| 132 | |
| 133 | Revision 1.1.2.12 2000/05/05 11:34:29 morsch |
| 134 | Log inside comments. |
| 135 | |
| 136 | Revision 1.1.2.11 2000/05/05 10:06:48 morsch |
| 137 | Coding Rule violations regarding trigger section corrected (CP) |
| 138 | Log messages included. |
| 139 | */ |
| 140 | |
| 141 | ///////////////////////////////////////////////////////// |
| 142 | // Manager and hits classes for set:MUON version 0 // |
| 143 | ///////////////////////////////////////////////////////// |
| 144 | |
| 145 | #include <TTUBE.h> |
| 146 | #include <TNode.h> |
| 147 | #include <TRandom.h> |
| 148 | #include <TLorentzVector.h> |
| 149 | #include <iostream.h> |
| 150 | |
| 151 | #include "AliMUONv1.h" |
| 152 | #include "AliRun.h" |
| 153 | #include "AliMC.h" |
| 94de3818 |
154 | #include "AliMagF.h" |
| a9e2aefa |
155 | #include "AliCallf77.h" |
| 156 | #include "AliConst.h" |
| 157 | #include "AliMUONChamber.h" |
| 158 | #include "AliMUONHit.h" |
| 159 | #include "AliMUONPadHit.h" |
| f665c1ea |
160 | #include "AliMUONConstants.h" |
| 8c449e83 |
161 | #include "AliMUONTriggerCircuit.h" |
| be3bb6c1 |
162 | #include "AliMUONFactory.h" |
| a9e2aefa |
163 | |
| 164 | ClassImp(AliMUONv1) |
| 165 | |
| 166 | //___________________________________________ |
| 167 | AliMUONv1::AliMUONv1() : AliMUON() |
| 168 | { |
| 169 | // Constructor |
| 170 | fChambers = 0; |
| 171 | } |
| 172 | |
| 173 | //___________________________________________ |
| 174 | AliMUONv1::AliMUONv1(const char *name, const char *title) |
| 175 | : AliMUON(name,title) |
| 176 | { |
| 177 | // Constructor |
| be3bb6c1 |
178 | AliMUONFactory::Build(this, title); |
| a9e2aefa |
179 | } |
| 180 | |
| 181 | //___________________________________________ |
| 182 | void AliMUONv1::CreateGeometry() |
| 183 | { |
| 184 | // |
| 185 | // Note: all chambers have the same structure, which could be |
| 186 | // easily parameterised. This was intentionally not done in order |
| 187 | // to give a starting point for the implementation of the actual |
| 188 | // design of each station. |
| 189 | Int_t *idtmed = fIdtmed->GetArray()-1099; |
| 190 | |
| 191 | // Distance between Stations |
| 192 | // |
| 193 | Float_t bpar[3]; |
| 194 | Float_t tpar[3]; |
| b64652f5 |
195 | // Float_t pgpar[10]; |
| a9e2aefa |
196 | Float_t zpos1, zpos2, zfpos; |
| b64652f5 |
197 | // Outer excess and inner recess for mother volume radius |
| 198 | // with respect to ROuter and RInner |
| a9e2aefa |
199 | Float_t dframep=.001; // Value for station 3 should be 6 ... |
| b64652f5 |
200 | // Width (RdPhi) of the frame crosses for stations 1 and 2 (cm) |
| 201 | // Float_t dframep1=.001; |
| 202 | Float_t dframep1 = 11.0; |
| 203 | // Bool_t frameCrosses=kFALSE; |
| 204 | Bool_t frameCrosses=kTRUE; |
| a9e2aefa |
205 | |
| b64652f5 |
206 | // Float_t dframez=0.9; |
| 207 | // Half of the total thickness of frame crosses (including DAlu) |
| 208 | // for each chamber in stations 1 and 2: |
| 209 | // 3% of X0 of composite material, |
| 210 | // but taken as Aluminium here, with same thickness in number of X0 |
| 211 | Float_t dframez = 3. * 8.9 / 100; |
| 212 | // Float_t dr; |
| a9e2aefa |
213 | Float_t dstation; |
| 214 | |
| 215 | // |
| 216 | // Rotation matrices in the x-y plane |
| 217 | Int_t idrotm[1199]; |
| 218 | // phi= 0 deg |
| 219 | AliMatrix(idrotm[1100], 90., 0., 90., 90., 0., 0.); |
| 220 | // phi= 90 deg |
| 221 | AliMatrix(idrotm[1101], 90., 90., 90., 180., 0., 0.); |
| 222 | // phi= 180 deg |
| 223 | AliMatrix(idrotm[1102], 90., 180., 90., 270., 0., 0.); |
| 224 | // phi= 270 deg |
| 225 | AliMatrix(idrotm[1103], 90., 270., 90., 0., 0., 0.); |
| 226 | // |
| 227 | Float_t phi=2*TMath::Pi()/12/2; |
| 228 | |
| 229 | // |
| 230 | // pointer to the current chamber |
| 231 | // pointer to the current chamber |
| b64652f5 |
232 | Int_t idAlu1=idtmed[1103]; // medium 4 |
| 233 | Int_t idAlu2=idtmed[1104]; // medium 5 |
| a9e2aefa |
234 | // Int_t idAlu1=idtmed[1100]; |
| 235 | // Int_t idAlu2=idtmed[1100]; |
| b64652f5 |
236 | Int_t idAir=idtmed[1100]; // medium 1 |
| 237 | // Int_t idGas=idtmed[1105]; // medium 6 = Ar-isoC4H10 gas |
| 238 | Int_t idGas=idtmed[1108]; // medium 9 = Ar-CO2 gas (80%+20%) |
| a9e2aefa |
239 | |
| 240 | |
| 241 | AliMUONChamber *iChamber, *iChamber1, *iChamber2; |
| b17c0c87 |
242 | Int_t stations[5] = {1, 1, 1, 1, 1}; |
| 243 | |
| 244 | if (stations[0]) { |
| 245 | |
| a9e2aefa |
246 | //******************************************************************** |
| 247 | // Station 1 ** |
| 248 | //******************************************************************** |
| 249 | // CONCENTRIC |
| 250 | // indices 1 and 2 for first and second chambers in the station |
| 251 | // iChamber (first chamber) kept for other quanties than Z, |
| 252 | // assumed to be the same in both chambers |
| 253 | iChamber1 = iChamber = (AliMUONChamber*) (*fChambers)[0]; |
| 254 | iChamber2 =(AliMUONChamber*) (*fChambers)[1]; |
| 255 | zpos1=iChamber1->Z(); |
| 256 | zpos2=iChamber2->Z(); |
| 257 | dstation = zpos2 - zpos1; |
| b64652f5 |
258 | // DGas decreased from standard one (0.5) |
| 259 | iChamber->SetDGas(0.4); iChamber2->SetDGas(0.4); |
| 260 | // DAlu increased from standard one (3% of X0), |
| 261 | // because more electronics with smaller pads |
| 262 | iChamber->SetDAlu(3.5 * 8.9 / 100.); iChamber2->SetDAlu(3.5 * 8.9 / 100.); |
| a9e2aefa |
263 | zfpos=-(iChamber->DGas()+dframez+iChamber->DAlu())/2; |
| 264 | |
| 265 | // |
| 266 | // Mother volume |
| b64652f5 |
267 | tpar[0] = iChamber->RInner()-dframep; |
| 268 | tpar[1] = (iChamber->ROuter()+dframep)/TMath::Cos(phi); |
| 2c799aa2 |
269 | tpar[2] = dstation/5; |
| a9e2aefa |
270 | |
| 271 | gMC->Gsvolu("C01M", "TUBE", idAir, tpar, 3); |
| 272 | gMC->Gsvolu("C02M", "TUBE", idAir, tpar, 3); |
| 273 | gMC->Gspos("C01M", 1, "ALIC", 0., 0., zpos1 , 0, "ONLY"); |
| 1e8fff9c |
274 | gMC->Gspos("C02M", 1, "ALIC", 0., 0., zpos2 , 0, "ONLY"); |
| b64652f5 |
275 | // // Aluminium frames |
| 276 | // // Outer frames |
| 277 | // pgpar[0] = 360/12/2; |
| 278 | // pgpar[1] = 360.; |
| 279 | // pgpar[2] = 12.; |
| 280 | // pgpar[3] = 2; |
| 281 | // pgpar[4] = -dframez/2; |
| 282 | // pgpar[5] = iChamber->ROuter(); |
| 283 | // pgpar[6] = pgpar[5]+dframep1; |
| 284 | // pgpar[7] = +dframez/2; |
| 285 | // pgpar[8] = pgpar[5]; |
| 286 | // pgpar[9] = pgpar[6]; |
| 287 | // gMC->Gsvolu("C01O", "PGON", idAlu1, pgpar, 10); |
| 288 | // gMC->Gsvolu("C02O", "PGON", idAlu1, pgpar, 10); |
| 289 | // gMC->Gspos("C01O",1,"C01M", 0.,0.,-zfpos, 0,"ONLY"); |
| 290 | // gMC->Gspos("C01O",2,"C01M", 0.,0.,+zfpos, 0,"ONLY"); |
| 291 | // gMC->Gspos("C02O",1,"C02M", 0.,0.,-zfpos, 0,"ONLY"); |
| 292 | // gMC->Gspos("C02O",2,"C02M", 0.,0.,+zfpos, 0,"ONLY"); |
| 293 | // // |
| 294 | // // Inner frame |
| 295 | // tpar[0]= iChamber->RInner()-dframep1; |
| 296 | // tpar[1]= iChamber->RInner(); |
| 297 | // tpar[2]= dframez/2; |
| 298 | // gMC->Gsvolu("C01I", "TUBE", idAlu1, tpar, 3); |
| 299 | // gMC->Gsvolu("C02I", "TUBE", idAlu1, tpar, 3); |
| 300 | |
| 301 | // gMC->Gspos("C01I",1,"C01M", 0.,0.,-zfpos, 0,"ONLY"); |
| 302 | // gMC->Gspos("C01I",2,"C01M", 0.,0.,+zfpos, 0,"ONLY"); |
| 303 | // gMC->Gspos("C02I",1,"C02M", 0.,0.,-zfpos, 0,"ONLY"); |
| 304 | // gMC->Gspos("C02I",2,"C02M", 0.,0.,+zfpos, 0,"ONLY"); |
| a9e2aefa |
305 | // |
| 306 | // Frame Crosses |
| b64652f5 |
307 | if (frameCrosses) { |
| 308 | // outside gas |
| 309 | // security for inside mother volume |
| 310 | bpar[0] = (iChamber->ROuter() - iChamber->RInner()) |
| 311 | * TMath::Cos(TMath::ASin(dframep1 / |
| 312 | (iChamber->ROuter() - iChamber->RInner()))) |
| 313 | / 2.0; |
| a9e2aefa |
314 | bpar[1] = dframep1/2; |
| b64652f5 |
315 | // total thickness will be (4 * bpar[2]) for each chamber, |
| 316 | // which has to be equal to (2 * dframez) - DAlu |
| 317 | bpar[2] = (2.0 * dframez - iChamber->DAlu()) / 4.0; |
| a9e2aefa |
318 | gMC->Gsvolu("C01B", "BOX", idAlu1, bpar, 3); |
| 319 | gMC->Gsvolu("C02B", "BOX", idAlu1, bpar, 3); |
| 320 | |
| 321 | gMC->Gspos("C01B",1,"C01M", +iChamber->RInner()+bpar[0] , 0,-zfpos, |
| 322 | idrotm[1100],"ONLY"); |
| 323 | gMC->Gspos("C01B",2,"C01M", -iChamber->RInner()-bpar[0] , 0,-zfpos, |
| 324 | idrotm[1100],"ONLY"); |
| 325 | gMC->Gspos("C01B",3,"C01M", 0, +iChamber->RInner()+bpar[0] ,-zfpos, |
| 326 | idrotm[1101],"ONLY"); |
| 327 | gMC->Gspos("C01B",4,"C01M", 0, -iChamber->RInner()-bpar[0] ,-zfpos, |
| 328 | idrotm[1101],"ONLY"); |
| 329 | gMC->Gspos("C01B",5,"C01M", +iChamber->RInner()+bpar[0] , 0,+zfpos, |
| 330 | idrotm[1100],"ONLY"); |
| 331 | gMC->Gspos("C01B",6,"C01M", -iChamber->RInner()-bpar[0] , 0,+zfpos, |
| 332 | idrotm[1100],"ONLY"); |
| 333 | gMC->Gspos("C01B",7,"C01M", 0, +iChamber->RInner()+bpar[0] ,+zfpos, |
| 334 | idrotm[1101],"ONLY"); |
| 335 | gMC->Gspos("C01B",8,"C01M", 0, -iChamber->RInner()-bpar[0] ,+zfpos, |
| 336 | idrotm[1101],"ONLY"); |
| 337 | |
| 338 | gMC->Gspos("C02B",1,"C02M", +iChamber->RInner()+bpar[0] , 0,-zfpos, |
| 339 | idrotm[1100],"ONLY"); |
| 340 | gMC->Gspos("C02B",2,"C02M", -iChamber->RInner()-bpar[0] , 0,-zfpos, |
| 341 | idrotm[1100],"ONLY"); |
| 342 | gMC->Gspos("C02B",3,"C02M", 0, +iChamber->RInner()+bpar[0] ,-zfpos, |
| 343 | idrotm[1101],"ONLY"); |
| 344 | gMC->Gspos("C02B",4,"C02M", 0, -iChamber->RInner()-bpar[0] ,-zfpos, |
| 345 | idrotm[1101],"ONLY"); |
| 346 | gMC->Gspos("C02B",5,"C02M", +iChamber->RInner()+bpar[0] , 0,+zfpos, |
| 347 | idrotm[1100],"ONLY"); |
| 348 | gMC->Gspos("C02B",6,"C02M", -iChamber->RInner()-bpar[0] , 0,+zfpos, |
| 349 | idrotm[1100],"ONLY"); |
| 350 | gMC->Gspos("C02B",7,"C02M", 0, +iChamber->RInner()+bpar[0] ,+zfpos, |
| 351 | idrotm[1101],"ONLY"); |
| 352 | gMC->Gspos("C02B",8,"C02M", 0, -iChamber->RInner()-bpar[0] ,+zfpos, |
| 353 | idrotm[1101],"ONLY"); |
| 354 | } |
| 355 | // |
| 356 | // Chamber Material represented by Alu sheet |
| 357 | tpar[0]= iChamber->RInner(); |
| 358 | tpar[1]= iChamber->ROuter(); |
| 359 | tpar[2] = (iChamber->DGas()+iChamber->DAlu())/2; |
| 360 | gMC->Gsvolu("C01A", "TUBE", idAlu2, tpar, 3); |
| 361 | gMC->Gsvolu("C02A", "TUBE",idAlu2, tpar, 3); |
| 362 | gMC->Gspos("C01A", 1, "C01M", 0., 0., 0., 0, "ONLY"); |
| 363 | gMC->Gspos("C02A", 1, "C02M", 0., 0., 0., 0, "ONLY"); |
| 364 | // |
| 365 | // Sensitive volumes |
| 366 | // tpar[2] = iChamber->DGas(); |
| 367 | tpar[2] = iChamber->DGas()/2; |
| b64652f5 |
368 | gMC->Gsvolu("C01G", "TUBE", idGas, tpar, 3); |
| 369 | gMC->Gsvolu("C02G", "TUBE", idGas, tpar, 3); |
| a9e2aefa |
370 | gMC->Gspos("C01G", 1, "C01A", 0., 0., 0., 0, "ONLY"); |
| 371 | gMC->Gspos("C02G", 1, "C02A", 0., 0., 0., 0, "ONLY"); |
| 372 | // |
| b64652f5 |
373 | // Frame Crosses to be placed inside gas |
| 374 | // NONE: chambers are sensitive everywhere |
| 375 | // if (frameCrosses) { |
| 376 | |
| 377 | // dr = (iChamber->ROuter() - iChamber->RInner()); |
| 378 | // bpar[0] = TMath::Sqrt(dr*dr-dframep1*dframep1/4)/2; |
| 379 | // bpar[1] = dframep1/2; |
| 380 | // bpar[2] = iChamber->DGas()/2; |
| 381 | // gMC->Gsvolu("C01F", "BOX", idAlu1, bpar, 3); |
| 382 | // gMC->Gsvolu("C02F", "BOX", idAlu1, bpar, 3); |
| a9e2aefa |
383 | |
| b64652f5 |
384 | // gMC->Gspos("C01F",1,"C01G", +iChamber->RInner()+bpar[0] , 0, 0, |
| 385 | // idrotm[1100],"ONLY"); |
| 386 | // gMC->Gspos("C01F",2,"C01G", -iChamber->RInner()-bpar[0] , 0, 0, |
| 387 | // idrotm[1100],"ONLY"); |
| 388 | // gMC->Gspos("C01F",3,"C01G", 0, +iChamber->RInner()+bpar[0] , 0, |
| 389 | // idrotm[1101],"ONLY"); |
| 390 | // gMC->Gspos("C01F",4,"C01G", 0, -iChamber->RInner()-bpar[0] , 0, |
| 391 | // idrotm[1101],"ONLY"); |
| a9e2aefa |
392 | |
| b64652f5 |
393 | // gMC->Gspos("C02F",1,"C02G", +iChamber->RInner()+bpar[0] , 0, 0, |
| 394 | // idrotm[1100],"ONLY"); |
| 395 | // gMC->Gspos("C02F",2,"C02G", -iChamber->RInner()-bpar[0] , 0, 0, |
| 396 | // idrotm[1100],"ONLY"); |
| 397 | // gMC->Gspos("C02F",3,"C02G", 0, +iChamber->RInner()+bpar[0] , 0, |
| 398 | // idrotm[1101],"ONLY"); |
| 399 | // gMC->Gspos("C02F",4,"C02G", 0, -iChamber->RInner()-bpar[0] , 0, |
| 400 | // idrotm[1101],"ONLY"); |
| 401 | // } |
| b17c0c87 |
402 | } |
| 403 | if (stations[1]) { |
| 404 | |
| a9e2aefa |
405 | //******************************************************************** |
| 406 | // Station 2 ** |
| 407 | //******************************************************************** |
| 408 | // indices 1 and 2 for first and second chambers in the station |
| 409 | // iChamber (first chamber) kept for other quanties than Z, |
| 410 | // assumed to be the same in both chambers |
| 411 | iChamber1 = iChamber = (AliMUONChamber*) (*fChambers)[2]; |
| 412 | iChamber2 =(AliMUONChamber*) (*fChambers)[3]; |
| 413 | zpos1=iChamber1->Z(); |
| 414 | zpos2=iChamber2->Z(); |
| 415 | dstation = zpos2 - zpos1; |
| b64652f5 |
416 | // DGas and DAlu not changed from standard values |
| a9e2aefa |
417 | zfpos=-(iChamber->DGas()+dframez+iChamber->DAlu())/2; |
| 418 | |
| 419 | // |
| 420 | // Mother volume |
| 421 | tpar[0] = iChamber->RInner()-dframep; |
| 422 | tpar[1] = (iChamber->ROuter()+dframep)/TMath::Cos(phi); |
| 2c799aa2 |
423 | tpar[2] = dstation/5; |
| a9e2aefa |
424 | |
| 425 | gMC->Gsvolu("C03M", "TUBE", idAir, tpar, 3); |
| 426 | gMC->Gsvolu("C04M", "TUBE", idAir, tpar, 3); |
| 427 | gMC->Gspos("C03M", 1, "ALIC", 0., 0., zpos1 , 0, "ONLY"); |
| 428 | gMC->Gspos("C04M", 1, "ALIC", 0., 0., zpos2 , 0, "ONLY"); |
| 1e8fff9c |
429 | |
| b64652f5 |
430 | // // Aluminium frames |
| 431 | // // Outer frames |
| 432 | // pgpar[0] = 360/12/2; |
| 433 | // pgpar[1] = 360.; |
| 434 | // pgpar[2] = 12.; |
| 435 | // pgpar[3] = 2; |
| 436 | // pgpar[4] = -dframez/2; |
| 437 | // pgpar[5] = iChamber->ROuter(); |
| 438 | // pgpar[6] = pgpar[5]+dframep; |
| 439 | // pgpar[7] = +dframez/2; |
| 440 | // pgpar[8] = pgpar[5]; |
| 441 | // pgpar[9] = pgpar[6]; |
| 442 | // gMC->Gsvolu("C03O", "PGON", idAlu1, pgpar, 10); |
| 443 | // gMC->Gsvolu("C04O", "PGON", idAlu1, pgpar, 10); |
| 444 | // gMC->Gspos("C03O",1,"C03M", 0.,0.,-zfpos, 0,"ONLY"); |
| 445 | // gMC->Gspos("C03O",2,"C03M", 0.,0.,+zfpos, 0,"ONLY"); |
| 446 | // gMC->Gspos("C04O",1,"C04M", 0.,0.,-zfpos, 0,"ONLY"); |
| 447 | // gMC->Gspos("C04O",2,"C04M", 0.,0.,+zfpos, 0,"ONLY"); |
| 448 | // // |
| 449 | // // Inner frame |
| 450 | // tpar[0]= iChamber->RInner()-dframep; |
| 451 | // tpar[1]= iChamber->RInner(); |
| 452 | // tpar[2]= dframez/2; |
| 453 | // gMC->Gsvolu("C03I", "TUBE", idAlu1, tpar, 3); |
| 454 | // gMC->Gsvolu("C04I", "TUBE", idAlu1, tpar, 3); |
| 455 | |
| 456 | // gMC->Gspos("C03I",1,"C03M", 0.,0.,-zfpos, 0,"ONLY"); |
| 457 | // gMC->Gspos("C03I",2,"C03M", 0.,0.,+zfpos, 0,"ONLY"); |
| 458 | // gMC->Gspos("C04I",1,"C04M", 0.,0.,-zfpos, 0,"ONLY"); |
| 459 | // gMC->Gspos("C04I",2,"C04M", 0.,0.,+zfpos, 0,"ONLY"); |
| a9e2aefa |
460 | // |
| 461 | // Frame Crosses |
| b64652f5 |
462 | if (frameCrosses) { |
| 463 | // outside gas |
| 464 | // security for inside mother volume |
| 465 | bpar[0] = (iChamber->ROuter() - iChamber->RInner()) |
| 466 | * TMath::Cos(TMath::ASin(dframep1 / |
| 467 | (iChamber->ROuter() - iChamber->RInner()))) |
| 468 | / 2.0; |
| 469 | bpar[1] = dframep1/2; |
| 470 | // total thickness will be (4 * bpar[2]) for each chamber, |
| 471 | // which has to be equal to (2 * dframez) - DAlu |
| 472 | bpar[2] = (2.0 * dframez - iChamber->DAlu()) / 4.0; |
| a9e2aefa |
473 | gMC->Gsvolu("C03B", "BOX", idAlu1, bpar, 3); |
| 474 | gMC->Gsvolu("C04B", "BOX", idAlu1, bpar, 3); |
| 475 | |
| 476 | gMC->Gspos("C03B",1,"C03M", +iChamber->RInner()+bpar[0] , 0,-zfpos, |
| 477 | idrotm[1100],"ONLY"); |
| 478 | gMC->Gspos("C03B",2,"C03M", -iChamber->RInner()-bpar[0] , 0,-zfpos, |
| 479 | idrotm[1100],"ONLY"); |
| 480 | gMC->Gspos("C03B",3,"C03M", 0, +iChamber->RInner()+bpar[0] ,-zfpos, |
| 481 | idrotm[1101],"ONLY"); |
| 482 | gMC->Gspos("C03B",4,"C03M", 0, -iChamber->RInner()-bpar[0] ,-zfpos, |
| 483 | idrotm[1101],"ONLY"); |
| 484 | gMC->Gspos("C03B",5,"C03M", +iChamber->RInner()+bpar[0] , 0,+zfpos, |
| 485 | idrotm[1100],"ONLY"); |
| 486 | gMC->Gspos("C03B",6,"C03M", -iChamber->RInner()-bpar[0] , 0,+zfpos, |
| 487 | idrotm[1100],"ONLY"); |
| 488 | gMC->Gspos("C03B",7,"C03M", 0, +iChamber->RInner()+bpar[0] ,+zfpos, |
| 489 | idrotm[1101],"ONLY"); |
| 490 | gMC->Gspos("C03B",8,"C03M", 0, -iChamber->RInner()-bpar[0] ,+zfpos, |
| 491 | idrotm[1101],"ONLY"); |
| 492 | |
| 493 | gMC->Gspos("C04B",1,"C04M", +iChamber->RInner()+bpar[0] , 0,-zfpos, |
| 494 | idrotm[1100],"ONLY"); |
| 495 | gMC->Gspos("C04B",2,"C04M", -iChamber->RInner()-bpar[0] , 0,-zfpos, |
| 496 | idrotm[1100],"ONLY"); |
| 497 | gMC->Gspos("C04B",3,"C04M", 0, +iChamber->RInner()+bpar[0] ,-zfpos, |
| 498 | idrotm[1101],"ONLY"); |
| 499 | gMC->Gspos("C04B",4,"C04M", 0, -iChamber->RInner()-bpar[0] ,-zfpos, |
| 500 | idrotm[1101],"ONLY"); |
| 501 | gMC->Gspos("C04B",5,"C04M", +iChamber->RInner()+bpar[0] , 0,+zfpos, |
| 502 | idrotm[1100],"ONLY"); |
| 503 | gMC->Gspos("C04B",6,"C04M", -iChamber->RInner()-bpar[0] , 0,+zfpos, |
| 504 | idrotm[1100],"ONLY"); |
| 505 | gMC->Gspos("C04B",7,"C04M", 0, +iChamber->RInner()+bpar[0] ,+zfpos, |
| 506 | idrotm[1101],"ONLY"); |
| 507 | gMC->Gspos("C04B",8,"C04M", 0, -iChamber->RInner()-bpar[0] ,+zfpos, |
| 508 | idrotm[1101],"ONLY"); |
| 509 | } |
| 510 | // |
| 511 | // Chamber Material represented by Alu sheet |
| 512 | tpar[0]= iChamber->RInner(); |
| 513 | tpar[1]= iChamber->ROuter(); |
| 514 | tpar[2] = (iChamber->DGas()+iChamber->DAlu())/2; |
| 515 | gMC->Gsvolu("C03A", "TUBE", idAlu2, tpar, 3); |
| 516 | gMC->Gsvolu("C04A", "TUBE", idAlu2, tpar, 3); |
| 517 | gMC->Gspos("C03A", 1, "C03M", 0., 0., 0., 0, "ONLY"); |
| 518 | gMC->Gspos("C04A", 1, "C04M", 0., 0., 0., 0, "ONLY"); |
| 519 | // |
| 520 | // Sensitive volumes |
| 521 | // tpar[2] = iChamber->DGas(); |
| 522 | tpar[2] = iChamber->DGas()/2; |
| 523 | gMC->Gsvolu("C03G", "TUBE", idGas, tpar, 3); |
| 524 | gMC->Gsvolu("C04G", "TUBE", idGas, tpar, 3); |
| 525 | gMC->Gspos("C03G", 1, "C03A", 0., 0., 0., 0, "ONLY"); |
| 526 | gMC->Gspos("C04G", 1, "C04A", 0., 0., 0., 0, "ONLY"); |
| a9e2aefa |
527 | // |
| 528 | // Frame Crosses to be placed inside gas |
| b64652f5 |
529 | // NONE: chambers are sensitive everywhere |
| 530 | // if (frameCrosses) { |
| 531 | |
| 532 | // dr = (iChamber->ROuter() - iChamber->RInner()); |
| 533 | // bpar[0] = TMath::Sqrt(dr*dr-dframep1*dframep1/4)/2; |
| 534 | // bpar[1] = dframep1/2; |
| 535 | // bpar[2] = iChamber->DGas()/2; |
| 536 | // gMC->Gsvolu("C03F", "BOX", idAlu1, bpar, 3); |
| 537 | // gMC->Gsvolu("C04F", "BOX", idAlu1, bpar, 3); |
| a9e2aefa |
538 | |
| b64652f5 |
539 | // gMC->Gspos("C03F",1,"C03G", +iChamber->RInner()+bpar[0] , 0, 0, |
| 540 | // idrotm[1100],"ONLY"); |
| 541 | // gMC->Gspos("C03F",2,"C03G", -iChamber->RInner()-bpar[0] , 0, 0, |
| 542 | // idrotm[1100],"ONLY"); |
| 543 | // gMC->Gspos("C03F",3,"C03G", 0, +iChamber->RInner()+bpar[0] , 0, |
| 544 | // idrotm[1101],"ONLY"); |
| 545 | // gMC->Gspos("C03F",4,"C03G", 0, -iChamber->RInner()-bpar[0] , 0, |
| 546 | // idrotm[1101],"ONLY"); |
| a9e2aefa |
547 | |
| b64652f5 |
548 | // gMC->Gspos("C04F",1,"C04G", +iChamber->RInner()+bpar[0] , 0, 0, |
| 549 | // idrotm[1100],"ONLY"); |
| 550 | // gMC->Gspos("C04F",2,"C04G", -iChamber->RInner()-bpar[0] , 0, 0, |
| 551 | // idrotm[1100],"ONLY"); |
| 552 | // gMC->Gspos("C04F",3,"C04G", 0, +iChamber->RInner()+bpar[0] , 0, |
| 553 | // idrotm[1101],"ONLY"); |
| 554 | // gMC->Gspos("C04F",4,"C04G", 0, -iChamber->RInner()-bpar[0] , 0, |
| 555 | // idrotm[1101],"ONLY"); |
| 556 | // } |
| b17c0c87 |
557 | } |
| 1e8fff9c |
558 | // define the id of tracking media: |
| 559 | Int_t idCopper = idtmed[1110]; |
| 560 | Int_t idGlass = idtmed[1111]; |
| 561 | Int_t idCarbon = idtmed[1112]; |
| 562 | Int_t idRoha = idtmed[1113]; |
| 563 | |
| 1e8fff9c |
564 | // sensitive area: 40*40 cm**2 |
| 6c5ddcfa |
565 | const Float_t sensLength = 40.; |
| 566 | const Float_t sensHeight = 40.; |
| 567 | const Float_t sensWidth = 0.5; // according to TDR fig 2.120 |
| 568 | const Int_t sensMaterial = idGas; |
| 1e8fff9c |
569 | const Float_t yOverlap = 1.5; |
| 570 | |
| 571 | // PCB dimensions in cm; width: 30 mum copper |
| 6c5ddcfa |
572 | const Float_t pcbLength = sensLength; |
| 573 | const Float_t pcbHeight = 60.; |
| 574 | const Float_t pcbWidth = 0.003; |
| 575 | const Int_t pcbMaterial = idCopper; |
| 1e8fff9c |
576 | |
| 577 | // Insulating material: 200 mum glass fiber glued to pcb |
| 6c5ddcfa |
578 | const Float_t insuLength = pcbLength; |
| 579 | const Float_t insuHeight = pcbHeight; |
| 580 | const Float_t insuWidth = 0.020; |
| 581 | const Int_t insuMaterial = idGlass; |
| 1e8fff9c |
582 | |
| 583 | // Carbon fiber panels: 200mum carbon/epoxy skin |
| 6c5ddcfa |
584 | const Float_t panelLength = sensLength; |
| 585 | const Float_t panelHeight = sensHeight; |
| 586 | const Float_t panelWidth = 0.020; |
| 587 | const Int_t panelMaterial = idCarbon; |
| 1e8fff9c |
588 | |
| 589 | // rohacell between the two carbon panels |
| 6c5ddcfa |
590 | const Float_t rohaLength = sensLength; |
| 591 | const Float_t rohaHeight = sensHeight; |
| 592 | const Float_t rohaWidth = 0.5; |
| 593 | const Int_t rohaMaterial = idRoha; |
| 1e8fff9c |
594 | |
| 595 | // Frame around the slat: 2 sticks along length,2 along height |
| 596 | // H: the horizontal ones |
| 6c5ddcfa |
597 | const Float_t hFrameLength = pcbLength; |
| 598 | const Float_t hFrameHeight = 1.5; |
| 599 | const Float_t hFrameWidth = sensWidth; |
| 600 | const Int_t hFrameMaterial = idGlass; |
| 1e8fff9c |
601 | |
| 602 | // V: the vertical ones |
| 6c5ddcfa |
603 | const Float_t vFrameLength = 4.0; |
| 604 | const Float_t vFrameHeight = sensHeight + hFrameHeight; |
| 605 | const Float_t vFrameWidth = sensWidth; |
| 606 | const Int_t vFrameMaterial = idGlass; |
| 1e8fff9c |
607 | |
| 608 | // B: the horizontal border filled with rohacell |
| 6c5ddcfa |
609 | const Float_t bFrameLength = hFrameLength; |
| 610 | const Float_t bFrameHeight = (pcbHeight - sensHeight)/2. - hFrameHeight; |
| 611 | const Float_t bFrameWidth = hFrameWidth; |
| 612 | const Int_t bFrameMaterial = idRoha; |
| 1e8fff9c |
613 | |
| 614 | // NULOC: 30 mum copper + 200 mum vetronite (same radiation length as 14mum copper) |
| 6c5ddcfa |
615 | const Float_t nulocLength = 2.5; |
| 616 | const Float_t nulocHeight = 7.5; |
| 617 | const Float_t nulocWidth = 0.0030 + 0.0014; // equivalent copper width of vetronite; |
| 618 | const Int_t nulocMaterial = idCopper; |
| 1e8fff9c |
619 | |
| 6c5ddcfa |
620 | const Float_t slatHeight = pcbHeight; |
| 621 | const Float_t slatWidth = sensWidth + 2.*(pcbWidth + insuWidth + |
| 622 | 2.* panelWidth + rohaWidth); |
| 623 | const Int_t slatMaterial = idAir; |
| 624 | const Float_t dSlatLength = vFrameLength; // border on left and right |
| 1e8fff9c |
625 | |
| 1e8fff9c |
626 | Float_t spar[3]; |
| b17c0c87 |
627 | Int_t i, j; |
| 628 | |
| 3c084d9f |
629 | // the panel volume contains the rohacell |
| 630 | |
| 631 | Float_t twidth = 2 * panelWidth + rohaWidth; |
| 632 | Float_t panelpar[3] = { panelLength/2., panelHeight/2., twidth/2. }; |
| b17c0c87 |
633 | Float_t rohapar[3] = { rohaLength/2., rohaHeight/2., rohaWidth/2. }; |
| 3c084d9f |
634 | |
| 635 | // insulating material contains PCB-> gas-> 2 borders filled with rohacell |
| 636 | |
| 637 | twidth = 2*(insuWidth + pcbWidth) + sensWidth; |
| 638 | Float_t insupar[3] = { insuLength/2., insuHeight/2., twidth/2. }; |
| 639 | twidth -= 2 * insuWidth; |
| 640 | Float_t pcbpar[3] = { pcbLength/2., pcbHeight/2., twidth/2. }; |
| 641 | Float_t senspar[3] = { sensLength/2., sensHeight/2., sensWidth/2. }; |
| 642 | Float_t theight = 2*hFrameHeight + sensHeight; |
| 643 | Float_t hFramepar[3]={hFrameLength/2., theight/2., hFrameWidth/2.}; |
| b17c0c87 |
644 | Float_t bFramepar[3]={bFrameLength/2., bFrameHeight/2., bFrameWidth/2.}; |
| 3c084d9f |
645 | Float_t vFramepar[3]={vFrameLength/2., vFrameHeight/2., vFrameWidth/2.}; |
| b17c0c87 |
646 | Float_t nulocpar[3]={nulocLength/2., nulocHeight/2., nulocWidth/2.}; |
| b17c0c87 |
647 | Float_t xx; |
| 648 | Float_t xxmax = (bFrameLength - nulocLength)/2.; |
| 649 | Int_t index=0; |
| 650 | |
| 651 | if (stations[2]) { |
| 652 | |
| 653 | //******************************************************************** |
| 654 | // Station 3 ** |
| 655 | //******************************************************************** |
| 656 | // indices 1 and 2 for first and second chambers in the station |
| 657 | // iChamber (first chamber) kept for other quanties than Z, |
| 658 | // assumed to be the same in both chambers |
| 659 | iChamber1 = iChamber = (AliMUONChamber*) (*fChambers)[4]; |
| 660 | iChamber2 =(AliMUONChamber*) (*fChambers)[5]; |
| 661 | zpos1=iChamber1->Z(); |
| 662 | zpos2=iChamber2->Z(); |
| 663 | dstation = zpos2 - zpos1; |
| 664 | |
| b64652f5 |
665 | // zfpos=-(iChamber->DGas()+dframez+iChamber->DAlu())/2; // not used any more |
| b17c0c87 |
666 | // |
| 667 | // Mother volume |
| 668 | tpar[0] = iChamber->RInner()-dframep; |
| 669 | tpar[1] = (iChamber->ROuter()+dframep)/TMath::Cos(phi); |
| 21a18f36 |
670 | tpar[2] = dstation/5; |
| 2724ae40 |
671 | |
| 672 | char *slats5Mother = "C05M"; |
| 673 | char *slats6Mother = "C06M"; |
| 674 | Float_t zoffs5 = 0; |
| 675 | Float_t zoffs6 = 0; |
| 676 | |
| 677 | if (gMC->VolId("DDIP")) { |
| 678 | slats5Mother="DDIP"; |
| 679 | slats6Mother="DDIP"; |
| 680 | |
| 681 | zoffs5 = zpos1; |
| 682 | zoffs6 = zpos2; |
| 683 | } |
| 684 | else { |
| 685 | gMC->Gsvolu("C05M", "TUBE", idAir, tpar, 3); |
| 686 | gMC->Gsvolu("C06M", "TUBE", idAir, tpar, 3); |
| 687 | gMC->Gspos("C05M", 1, "ALIC", 0., 0., zpos1 , 0, "ONLY"); |
| 688 | gMC->Gspos("C06M", 1, "ALIC", 0., 0., zpos2 , 0, "ONLY"); |
| 689 | } |
| 690 | |
| b17c0c87 |
691 | // volumes for slat geometry (xx=5,..,10 chamber id): |
| 692 | // Sxx0 Sxx1 Sxx2 Sxx3 --> Slat Mother volumes |
| 693 | // SxxG --> Sensitive volume (gas) |
| 694 | // SxxP --> PCB (copper) |
| 695 | // SxxI --> Insulator (vetronite) |
| 696 | // SxxC --> Carbon panel |
| 697 | // SxxR --> Rohacell |
| 698 | // SxxH, SxxV --> Horizontal and Vertical frames (vetronite) |
| 21a18f36 |
699 | // SB5x --> Volumes for the 35 cm long PCB |
| b17c0c87 |
700 | // slat dimensions: slat is a MOTHER volume!!! made of air |
| 701 | |
| 21a18f36 |
702 | // only for chamber 5: slat 1 has a PCB shorter by 5cm! |
| 703 | |
| 704 | Float_t tlength = 35.; |
| 705 | Float_t panelpar2[3] = { tlength/2., panelpar[1], panelpar[2]}; |
| 706 | Float_t rohapar2[3] = { tlength/2., rohapar[1], rohapar[2]}; |
| 707 | Float_t insupar2[3] = { tlength/2., insupar[1], insupar[2]}; |
| 708 | Float_t pcbpar2[3] = { tlength/2., pcbpar[1], pcbpar[2]}; |
| 709 | Float_t senspar2[3] = { tlength/2., senspar[1], senspar[2]}; |
| 710 | Float_t hFramepar2[3] = { tlength/2., hFramepar[1], hFramepar[2]}; |
| 711 | Float_t bFramepar2[3] = { tlength/2., bFramepar[1], bFramepar[2]}; |
| 712 | |
| a083207d |
713 | const Int_t nSlats3 = 5; // number of slats per quadrant |
| 714 | const Int_t nPCB3[nSlats3] = {3,3,4,3,2}; // n PCB per slat |
| 21a18f36 |
715 | const Float_t xpos3[nSlats3] = {31., 40., 0., 0., 0.}; |
| b17c0c87 |
716 | Float_t slatLength3[nSlats3]; |
| 717 | |
| 718 | // create and position the slat (mother) volumes |
| 719 | |
| 6c5ddcfa |
720 | char volNam5[5]; |
| 721 | char volNam6[5]; |
| f9f7c205 |
722 | Float_t xSlat3; |
| b17c0c87 |
723 | |
| 21a18f36 |
724 | Float_t spar2[3]; |
| 6c5ddcfa |
725 | for (i = 0; i<nSlats3; i++){ |
| 3c084d9f |
726 | slatLength3[i] = pcbLength * nPCB3[i] + 2. * dSlatLength; |
| a083207d |
727 | xSlat3 = slatLength3[i]/2. - vFrameLength/2. + xpos3[i]; |
| 21a18f36 |
728 | if (i==1 || i==0) slatLength3[i] -= 2. *dSlatLength; // frame out in PCB with circular border |
| a083207d |
729 | Float_t ySlat31 = sensHeight * i - yOverlap * i; |
| 730 | Float_t ySlat32 = -sensHeight * i + yOverlap * i; |
| 3c084d9f |
731 | spar[0] = slatLength3[i]/2.; |
| 732 | spar[1] = slatHeight/2.; |
| 733 | spar[2] = slatWidth/2. * 1.01; |
| 21a18f36 |
734 | // take away 5 cm from the first slat in chamber 5 |
| 735 | Float_t xSlat32 = 0; |
| 736 | if (i==1 || i==2) { // 1 pcb is shortened by 5cm |
| 737 | spar2[0] = spar[0]-5./2.; |
| 738 | xSlat32 = xSlat3 - 5/2.; |
| 739 | } |
| 740 | else { |
| 741 | spar2[0] = spar[0]; |
| 742 | xSlat32 = xSlat3; |
| 743 | } |
| 744 | spar2[1] = spar[1]; |
| 745 | spar2[2] = spar[2]; |
| 3c084d9f |
746 | Float_t dzCh3=spar[2] * 1.01; |
| 747 | // zSlat to be checked (odd downstream or upstream?) |
| 748 | Float_t zSlat = (i%2 ==0)? -spar[2] : spar[2]; |
| 749 | sprintf(volNam5,"S05%d",i); |
| 21a18f36 |
750 | gMC->Gsvolu(volNam5,"BOX",slatMaterial,spar2,3); |
| 2724ae40 |
751 | gMC->Gspos(volNam5, i*4+1,slats5Mother, xSlat32, ySlat31, zoffs5+zSlat+2.*dzCh3, 0, "ONLY"); |
| 752 | gMC->Gspos(volNam5, i*4+2,slats5Mother,-xSlat32, ySlat31, zoffs5+zSlat-2.*dzCh3, 0, "ONLY"); |
| 21a18f36 |
753 | |
| a083207d |
754 | if (i>0) { |
| 2724ae40 |
755 | gMC->Gspos(volNam5, i*4+3,slats5Mother, xSlat32, ySlat32, zoffs5+zSlat+2.*dzCh3, 0, "ONLY"); |
| 756 | gMC->Gspos(volNam5, i*4+4,slats5Mother,-xSlat32, ySlat32, zoffs5+zSlat-2.*dzCh3, 0, "ONLY"); |
| a083207d |
757 | } |
| 3c084d9f |
758 | sprintf(volNam6,"S06%d",i); |
| 759 | gMC->Gsvolu(volNam6,"BOX",slatMaterial,spar,3); |
| 2724ae40 |
760 | gMC->Gspos(volNam6, i*4+1,slats6Mother, xSlat3, ySlat31, zoffs6+zSlat+2.*dzCh3, 0, "ONLY"); |
| 761 | gMC->Gspos(volNam6, i*4+2,slats6Mother,-xSlat3, ySlat31, zoffs6+zSlat-2.*dzCh3, 0, "ONLY"); |
| a083207d |
762 | if (i>0) { |
| 2724ae40 |
763 | gMC->Gspos(volNam6, i*4+3,slats6Mother, xSlat3, ySlat32, zoffs6+zSlat+2.*dzCh3, 0, "ONLY"); |
| 764 | gMC->Gspos(volNam6, i*4+4,slats6Mother,-xSlat3, ySlat32, zoffs6+zSlat-2.*dzCh3, 0, "ONLY"); |
| a083207d |
765 | } |
| 3c084d9f |
766 | } |
| 1e8fff9c |
767 | |
| 768 | // create the panel volume |
| b17c0c87 |
769 | |
| 6c5ddcfa |
770 | gMC->Gsvolu("S05C","BOX",panelMaterial,panelpar,3); |
| 21a18f36 |
771 | gMC->Gsvolu("SB5C","BOX",panelMaterial,panelpar2,3); |
| 6c5ddcfa |
772 | gMC->Gsvolu("S06C","BOX",panelMaterial,panelpar,3); |
| 1e8fff9c |
773 | |
| 774 | // create the rohacell volume |
| b17c0c87 |
775 | |
| 6c5ddcfa |
776 | gMC->Gsvolu("S05R","BOX",rohaMaterial,rohapar,3); |
| 21a18f36 |
777 | gMC->Gsvolu("SB5R","BOX",rohaMaterial,rohapar2,3); |
| 6c5ddcfa |
778 | gMC->Gsvolu("S06R","BOX",rohaMaterial,rohapar,3); |
| 1e8fff9c |
779 | |
| 3c084d9f |
780 | // create the insulating material volume |
| 781 | |
| 782 | gMC->Gsvolu("S05I","BOX",insuMaterial,insupar,3); |
| 21a18f36 |
783 | gMC->Gsvolu("SB5I","BOX",insuMaterial,insupar2,3); |
| 3c084d9f |
784 | gMC->Gsvolu("S06I","BOX",insuMaterial,insupar,3); |
| 785 | |
| 786 | // create the PCB volume |
| 787 | |
| 788 | gMC->Gsvolu("S05P","BOX",pcbMaterial,pcbpar,3); |
| 21a18f36 |
789 | gMC->Gsvolu("SB5P","BOX",pcbMaterial,pcbpar2,3); |
| 3c084d9f |
790 | gMC->Gsvolu("S06P","BOX",pcbMaterial,pcbpar,3); |
| 791 | |
| 792 | // create the sensitive volumes, |
| 793 | gMC->Gsvolu("S05G","BOX",sensMaterial,0,0); |
| 794 | gMC->Gsvolu("S06G","BOX",sensMaterial,0,0); |
| 795 | |
| 796 | |
| 1e8fff9c |
797 | // create the vertical frame volume |
| b17c0c87 |
798 | |
| 6c5ddcfa |
799 | gMC->Gsvolu("S05V","BOX",vFrameMaterial,vFramepar,3); |
| 800 | gMC->Gsvolu("S06V","BOX",vFrameMaterial,vFramepar,3); |
| 1e8fff9c |
801 | |
| 802 | // create the horizontal frame volume |
| b17c0c87 |
803 | |
| 6c5ddcfa |
804 | gMC->Gsvolu("S05H","BOX",hFrameMaterial,hFramepar,3); |
| 21a18f36 |
805 | gMC->Gsvolu("SB5H","BOX",hFrameMaterial,hFramepar2,3); |
| 6c5ddcfa |
806 | gMC->Gsvolu("S06H","BOX",hFrameMaterial,hFramepar,3); |
| 1e8fff9c |
807 | |
| 808 | // create the horizontal border volume |
| b17c0c87 |
809 | |
| 6c5ddcfa |
810 | gMC->Gsvolu("S05B","BOX",bFrameMaterial,bFramepar,3); |
| 21a18f36 |
811 | gMC->Gsvolu("SB5B","BOX",bFrameMaterial,bFramepar2,3); |
| 6c5ddcfa |
812 | gMC->Gsvolu("S06B","BOX",bFrameMaterial,bFramepar,3); |
| 1e8fff9c |
813 | |
| b17c0c87 |
814 | index=0; |
| 6c5ddcfa |
815 | for (i = 0; i<nSlats3; i++){ |
| 816 | sprintf(volNam5,"S05%d",i); |
| 817 | sprintf(volNam6,"S06%d",i); |
| f9f7c205 |
818 | Float_t xvFrame = (slatLength3[i] - vFrameLength)/2.; |
| 21a18f36 |
819 | Float_t xvFrame2 = xvFrame; |
| 820 | if ( i==1 || i ==2 ) xvFrame2 -= 5./2.; |
| 3c084d9f |
821 | // position the vertical frames |
| 21a18f36 |
822 | if (i!=1 && i!=0) { |
| 823 | gMC->Gspos("S05V",2*i-1,volNam5, xvFrame2, 0., 0. , 0, "ONLY"); |
| 824 | gMC->Gspos("S05V",2*i ,volNam5,-xvFrame2, 0., 0. , 0, "ONLY"); |
| 3c084d9f |
825 | gMC->Gspos("S06V",2*i-1,volNam6, xvFrame, 0., 0. , 0, "ONLY"); |
| 826 | gMC->Gspos("S06V",2*i ,volNam6,-xvFrame, 0., 0. , 0, "ONLY"); |
| 827 | } |
| 828 | // position the panels and the insulating material |
| 6c5ddcfa |
829 | for (j=0; j<nPCB3[i]; j++){ |
| 1e8fff9c |
830 | index++; |
| 6c5ddcfa |
831 | Float_t xx = sensLength * (-nPCB3[i]/2.+j+.5); |
| 21a18f36 |
832 | Float_t xx2 = xx + 5/2.; |
| 3c084d9f |
833 | |
| 834 | Float_t zPanel = spar[2] - panelpar[2]; |
| 21a18f36 |
835 | if ( (i==1 || i==2) && j == nPCB3[i]-1) { // 1 pcb is shortened by 5cm |
| 836 | gMC->Gspos("SB5C",2*index-1,volNam5, xx, 0., zPanel , 0, "ONLY"); |
| 837 | gMC->Gspos("SB5C",2*index ,volNam5, xx, 0.,-zPanel , 0, "ONLY"); |
| 838 | gMC->Gspos("SB5I",index ,volNam5, xx, 0., 0 , 0, "ONLY"); |
| 839 | } |
| 840 | else if ( (i==1 || i==2) && j < nPCB3[i]-1) { |
| 841 | gMC->Gspos("S05C",2*index-1,volNam5, xx2, 0., zPanel , 0, "ONLY"); |
| 842 | gMC->Gspos("S05C",2*index ,volNam5, xx2, 0.,-zPanel , 0, "ONLY"); |
| 843 | gMC->Gspos("S05I",index ,volNam5, xx2, 0., 0 , 0, "ONLY"); |
| 844 | } |
| 845 | else { |
| 846 | gMC->Gspos("S05C",2*index-1,volNam5, xx, 0., zPanel , 0, "ONLY"); |
| 847 | gMC->Gspos("S05C",2*index ,volNam5, xx, 0.,-zPanel , 0, "ONLY"); |
| 848 | gMC->Gspos("S05I",index ,volNam5, xx, 0., 0 , 0, "ONLY"); |
| 849 | } |
| 3c084d9f |
850 | gMC->Gspos("S06C",2*index-1,volNam6, xx, 0., zPanel , 0, "ONLY"); |
| 851 | gMC->Gspos("S06C",2*index ,volNam6, xx, 0.,-zPanel , 0, "ONLY"); |
| 3c084d9f |
852 | gMC->Gspos("S06I",index,volNam6, xx, 0., 0 , 0, "ONLY"); |
| 1e8fff9c |
853 | } |
| a9e2aefa |
854 | } |
| 21a18f36 |
855 | |
| 3c084d9f |
856 | // position the rohacell volume inside the panel volume |
| 857 | gMC->Gspos("S05R",1,"S05C",0.,0.,0.,0,"ONLY"); |
| 21a18f36 |
858 | gMC->Gspos("SB5R",1,"SB5C",0.,0.,0.,0,"ONLY"); |
| 3c084d9f |
859 | gMC->Gspos("S06R",1,"S06C",0.,0.,0.,0,"ONLY"); |
| 860 | |
| 861 | // position the PCB volume inside the insulating material volume |
| 862 | gMC->Gspos("S05P",1,"S05I",0.,0.,0.,0,"ONLY"); |
| 21a18f36 |
863 | gMC->Gspos("SB5P",1,"SB5I",0.,0.,0.,0,"ONLY"); |
| 3c084d9f |
864 | gMC->Gspos("S06P",1,"S06I",0.,0.,0.,0,"ONLY"); |
| 865 | // position the horizontal frame volume inside the PCB volume |
| 866 | gMC->Gspos("S05H",1,"S05P",0.,0.,0.,0,"ONLY"); |
| 21a18f36 |
867 | gMC->Gspos("SB5H",1,"SB5P",0.,0.,0.,0,"ONLY"); |
| 3c084d9f |
868 | gMC->Gspos("S06H",1,"S06P",0.,0.,0.,0,"ONLY"); |
| 869 | // position the sensitive volume inside the horizontal frame volume |
| 870 | gMC->Gsposp("S05G",1,"S05H",0.,0.,0.,0,"ONLY",senspar,3); |
| 21a18f36 |
871 | gMC->Gsposp("S05G",1,"SB5H",0.,0.,0.,0,"ONLY",senspar2,3); |
| 3c084d9f |
872 | gMC->Gsposp("S06G",1,"S06H",0.,0.,0.,0,"ONLY",senspar,3); |
| 873 | // position the border volumes inside the PCB volume |
| 874 | Float_t yborder = ( pcbHeight - bFrameHeight ) / 2.; |
| 875 | gMC->Gspos("S05B",1,"S05P",0., yborder,0.,0,"ONLY"); |
| 876 | gMC->Gspos("S05B",2,"S05P",0.,-yborder,0.,0,"ONLY"); |
| 21a18f36 |
877 | gMC->Gspos("SB5B",1,"SB5P",0., yborder,0.,0,"ONLY"); |
| 878 | gMC->Gspos("SB5B",2,"SB5P",0.,-yborder,0.,0,"ONLY"); |
| 3c084d9f |
879 | gMC->Gspos("S06B",1,"S06P",0., yborder,0.,0,"ONLY"); |
| 880 | gMC->Gspos("S06B",2,"S06P",0.,-yborder,0.,0,"ONLY"); |
| 881 | |
| 1e8fff9c |
882 | // create the NULOC volume and position it in the horizontal frame |
| b17c0c87 |
883 | |
| 6c5ddcfa |
884 | gMC->Gsvolu("S05N","BOX",nulocMaterial,nulocpar,3); |
| 885 | gMC->Gsvolu("S06N","BOX",nulocMaterial,nulocpar,3); |
| 6c5ddcfa |
886 | index = 0; |
| 21a18f36 |
887 | Float_t xxmax2 = xxmax - 5./2.; |
| 888 | for (xx = -xxmax; xx<=xxmax; xx+=2*nulocLength) { |
| 1e8fff9c |
889 | index++; |
| 6c5ddcfa |
890 | gMC->Gspos("S05N",2*index-1,"S05B", xx, 0.,-bFrameWidth/4., 0, "ONLY"); |
| 891 | gMC->Gspos("S05N",2*index ,"S05B", xx, 0., bFrameWidth/4., 0, "ONLY"); |
| 21a18f36 |
892 | if (xx > -xxmax2 && xx< xxmax2) { |
| 893 | gMC->Gspos("S05N",2*index-1,"SB5B", xx, 0.,-bFrameWidth/4., 0, "ONLY"); |
| 894 | gMC->Gspos("S05N",2*index ,"SB5B", xx, 0., bFrameWidth/4., 0, "ONLY"); |
| 895 | } |
| 6c5ddcfa |
896 | gMC->Gspos("S06N",2*index-1,"S06B", xx, 0.,-bFrameWidth/4., 0, "ONLY"); |
| 897 | gMC->Gspos("S06N",2*index ,"S06B", xx, 0., bFrameWidth/4., 0, "ONLY"); |
| 1e8fff9c |
898 | } |
| 3c084d9f |
899 | |
| 900 | // position the volumes approximating the circular section of the pipe |
| a083207d |
901 | Float_t yoffs = sensHeight/2. - yOverlap; |
| 3c084d9f |
902 | Float_t epsilon = 0.001; |
| 903 | Int_t ndiv=6; |
| 904 | Float_t divpar[3]; |
| 905 | Double_t dydiv= sensHeight/ndiv; |
| 21a18f36 |
906 | Double_t ydiv = yoffs -dydiv; |
| 3c084d9f |
907 | Int_t imax=0; |
| 3c084d9f |
908 | imax = 1; |
| 21a18f36 |
909 | Float_t rmin = 33.; |
| a083207d |
910 | Float_t z1 = spar[2], z2=2*spar[2]*1.01; |
| 3c084d9f |
911 | for (Int_t idiv=0;idiv<ndiv; idiv++){ |
| 912 | ydiv+= dydiv; |
| 425ebd0a |
913 | Float_t xdiv = 0.; |
| 3c084d9f |
914 | if (ydiv<rmin) xdiv= rmin * TMath::Sin( TMath::ACos(ydiv/rmin) ); |
| 915 | divpar[0] = (pcbLength-xdiv)/2.; |
| 916 | divpar[1] = dydiv/2. - epsilon; |
| 917 | divpar[2] = sensWidth/2.; |
| 425ebd0a |
918 | Float_t xvol=(pcbLength+xdiv)/2.+1.999; |
| a083207d |
919 | Float_t yvol=ydiv + dydiv/2.; |
| 21a18f36 |
920 | //printf ("y ll = %f y ur = %f \n",yvol - divpar[1], yvol + divpar[1]); |
| 2724ae40 |
921 | gMC->Gsposp("S05G",imax+4*idiv+1,slats5Mother, xvol, yvol, zoffs5+z1+z2, 0, "ONLY",divpar,3); |
| 922 | gMC->Gsposp("S06G",imax+4*idiv+1,slats6Mother, xvol, yvol, zoffs6+z1+z2, 0, "ONLY",divpar,3); |
| 923 | gMC->Gsposp("S05G",imax+4*idiv+2,slats5Mother, xvol,-yvol, zoffs5+z1+z2, 0, "ONLY",divpar,3); |
| 924 | gMC->Gsposp("S06G",imax+4*idiv+2,slats6Mother, xvol,-yvol, zoffs6+z1+z2, 0, "ONLY",divpar,3); |
| 925 | gMC->Gsposp("S05G",imax+4*idiv+3,slats5Mother,-xvol, yvol, zoffs5+z1-z2, 0, "ONLY",divpar,3); |
| 926 | gMC->Gsposp("S06G",imax+4*idiv+3,slats6Mother,-xvol, yvol, zoffs6+z1-z2, 0, "ONLY",divpar,3); |
| 927 | gMC->Gsposp("S05G",imax+4*idiv+4,slats5Mother,-xvol,-yvol, zoffs5+z1-z2, 0, "ONLY",divpar,3); |
| 928 | gMC->Gsposp("S06G",imax+4*idiv+4,slats6Mother,-xvol,-yvol, zoffs6+z1-z2, 0, "ONLY",divpar,3); |
| 3c084d9f |
929 | } |
| b17c0c87 |
930 | } |
| b17c0c87 |
931 | |
| 3c084d9f |
932 | if (stations[3]) { |
| 933 | |
| a9e2aefa |
934 | //******************************************************************** |
| 935 | // Station 4 ** |
| 936 | //******************************************************************** |
| 937 | // indices 1 and 2 for first and second chambers in the station |
| 938 | // iChamber (first chamber) kept for other quanties than Z, |
| 939 | // assumed to be the same in both chambers |
| 940 | iChamber1 = iChamber = (AliMUONChamber*) (*fChambers)[6]; |
| 941 | iChamber2 =(AliMUONChamber*) (*fChambers)[7]; |
| 942 | zpos1=iChamber1->Z(); |
| 943 | zpos2=iChamber2->Z(); |
| 944 | dstation = zpos2 - zpos1; |
| b64652f5 |
945 | // zfpos=-(iChamber->DGas()+dframez+iChamber->DAlu())/2; // not used any more |
| a9e2aefa |
946 | |
| 947 | // |
| 948 | // Mother volume |
| 949 | tpar[0] = iChamber->RInner()-dframep; |
| 950 | tpar[1] = (iChamber->ROuter()+dframep)/TMath::Cos(phi); |
| 2724ae40 |
951 | tpar[2] = dstation/4; |
| a9e2aefa |
952 | |
| 953 | gMC->Gsvolu("C07M", "TUBE", idAir, tpar, 3); |
| 954 | gMC->Gsvolu("C08M", "TUBE", idAir, tpar, 3); |
| 955 | gMC->Gspos("C07M", 1, "ALIC", 0., 0., zpos1 , 0, "ONLY"); |
| 956 | gMC->Gspos("C08M", 1, "ALIC", 0., 0., zpos2 , 0, "ONLY"); |
| 1e8fff9c |
957 | |
| a9e2aefa |
958 | |
| f9f7c205 |
959 | const Int_t nSlats4 = 6; // number of slats per quadrant |
| 425ebd0a |
960 | const Int_t nPCB4[nSlats4] = {4,4,5,5,4,3}; // n PCB per slat |
| 21a18f36 |
961 | const Float_t xpos4[nSlats4] = {38.5, 40., 0., 0., 0., 0.}; |
| 6c5ddcfa |
962 | Float_t slatLength4[nSlats4]; |
| 1e8fff9c |
963 | |
| 964 | // create and position the slat (mother) volumes |
| 965 | |
| 6c5ddcfa |
966 | char volNam7[5]; |
| 967 | char volNam8[5]; |
| 1e8fff9c |
968 | Float_t xSlat4; |
| f9f7c205 |
969 | Float_t ySlat4; |
| 1e8fff9c |
970 | |
| 6c5ddcfa |
971 | for (i = 0; i<nSlats4; i++){ |
| a083207d |
972 | slatLength4[i] = pcbLength * nPCB4[i] + 2. * dSlatLength; |
| 973 | xSlat4 = slatLength4[i]/2. - vFrameLength/2. + xpos4[i]; |
| 2724ae40 |
974 | if (i==1) slatLength4[i] -= 2. *dSlatLength; // frame out in PCB with circular border |
| a083207d |
975 | ySlat4 = sensHeight * i - yOverlap *i; |
| 976 | |
| 977 | spar[0] = slatLength4[i]/2.; |
| 978 | spar[1] = slatHeight/2.; |
| 979 | spar[2] = slatWidth/2.*1.01; |
| 980 | Float_t dzCh4=spar[2]*1.01; |
| 981 | // zSlat to be checked (odd downstream or upstream?) |
| 982 | Float_t zSlat = (i%2 ==0)? spar[2] : -spar[2]; |
| 983 | sprintf(volNam7,"S07%d",i); |
| 984 | gMC->Gsvolu(volNam7,"BOX",slatMaterial,spar,3); |
| 985 | gMC->Gspos(volNam7, i*4+1,"C07M", xSlat4, ySlat4, zSlat+2.*dzCh4, 0, "ONLY"); |
| 986 | gMC->Gspos(volNam7, i*4+2,"C07M",-xSlat4, ySlat4, zSlat-2.*dzCh4, 0, "ONLY"); |
| 987 | if (i>0) { |
| 988 | gMC->Gspos(volNam7, i*4+3,"C07M", xSlat4,-ySlat4, zSlat+2.*dzCh4, 0, "ONLY"); |
| 989 | gMC->Gspos(volNam7, i*4+4,"C07M",-xSlat4,-ySlat4, zSlat-2.*dzCh4, 0, "ONLY"); |
| 990 | } |
| 991 | sprintf(volNam8,"S08%d",i); |
| 992 | gMC->Gsvolu(volNam8,"BOX",slatMaterial,spar,3); |
| 993 | gMC->Gspos(volNam8, i*4+1,"C08M", xSlat4, ySlat4, zSlat+2.*dzCh4, 0, "ONLY"); |
| 994 | gMC->Gspos(volNam8, i*4+2,"C08M",-xSlat4, ySlat4, zSlat-2.*dzCh4, 0, "ONLY"); |
| 995 | if (i>0) { |
| 996 | gMC->Gspos(volNam8, i*4+3,"C08M", xSlat4,-ySlat4, zSlat+2.*dzCh4, 0, "ONLY"); |
| 997 | gMC->Gspos(volNam8, i*4+4,"C08M",-xSlat4,-ySlat4, zSlat-2.*dzCh4, 0, "ONLY"); |
| 998 | } |
| a9e2aefa |
999 | } |
| a083207d |
1000 | |
| 3c084d9f |
1001 | |
| 1002 | // create the panel volume |
| 1e8fff9c |
1003 | |
| 3c084d9f |
1004 | gMC->Gsvolu("S07C","BOX",panelMaterial,panelpar,3); |
| 1005 | gMC->Gsvolu("S08C","BOX",panelMaterial,panelpar,3); |
| a9e2aefa |
1006 | |
| 3c084d9f |
1007 | // create the rohacell volume |
| 1008 | |
| 1009 | gMC->Gsvolu("S07R","BOX",rohaMaterial,rohapar,3); |
| 1010 | gMC->Gsvolu("S08R","BOX",rohaMaterial,rohapar,3); |
| 1e8fff9c |
1011 | |
| 1e8fff9c |
1012 | // create the insulating material volume |
| 1013 | |
| 6c5ddcfa |
1014 | gMC->Gsvolu("S07I","BOX",insuMaterial,insupar,3); |
| 1015 | gMC->Gsvolu("S08I","BOX",insuMaterial,insupar,3); |
| 1e8fff9c |
1016 | |
| 3c084d9f |
1017 | // create the PCB volume |
| 1e8fff9c |
1018 | |
| 3c084d9f |
1019 | gMC->Gsvolu("S07P","BOX",pcbMaterial,pcbpar,3); |
| 1020 | gMC->Gsvolu("S08P","BOX",pcbMaterial,pcbpar,3); |
| 1e8fff9c |
1021 | |
| 3c084d9f |
1022 | // create the sensitive volumes, |
| 1023 | |
| 1024 | gMC->Gsvolu("S07G","BOX",sensMaterial,0,0); |
| 1025 | gMC->Gsvolu("S08G","BOX",sensMaterial,0,0); |
| 1e8fff9c |
1026 | |
| 1027 | // create the vertical frame volume |
| 1028 | |
| 6c5ddcfa |
1029 | gMC->Gsvolu("S07V","BOX",vFrameMaterial,vFramepar,3); |
| 1030 | gMC->Gsvolu("S08V","BOX",vFrameMaterial,vFramepar,3); |
| 1e8fff9c |
1031 | |
| 1032 | // create the horizontal frame volume |
| 1033 | |
| 6c5ddcfa |
1034 | gMC->Gsvolu("S07H","BOX",hFrameMaterial,hFramepar,3); |
| 1035 | gMC->Gsvolu("S08H","BOX",hFrameMaterial,hFramepar,3); |
| 1e8fff9c |
1036 | |
| 1037 | // create the horizontal border volume |
| 1038 | |
| 6c5ddcfa |
1039 | gMC->Gsvolu("S07B","BOX",bFrameMaterial,bFramepar,3); |
| 1040 | gMC->Gsvolu("S08B","BOX",bFrameMaterial,bFramepar,3); |
| 3c084d9f |
1041 | |
| 1042 | index=0; |
| 6c5ddcfa |
1043 | for (i = 0; i<nSlats4; i++){ |
| 1044 | sprintf(volNam7,"S07%d",i); |
| 1045 | sprintf(volNam8,"S08%d",i); |
| 1046 | Float_t xvFrame = (slatLength4[i] - vFrameLength)/2.; |
| 3c084d9f |
1047 | // position the vertical frames |
| 21a18f36 |
1048 | if (i!=1 && i!=0) { |
| a083207d |
1049 | gMC->Gspos("S07V",2*i-1,volNam7, xvFrame, 0., 0. , 0, "ONLY"); |
| 1050 | gMC->Gspos("S07V",2*i ,volNam7,-xvFrame, 0., 0. , 0, "ONLY"); |
| 1051 | gMC->Gspos("S08V",2*i-1,volNam8, xvFrame, 0., 0. , 0, "ONLY"); |
| 1052 | gMC->Gspos("S08V",2*i ,volNam8,-xvFrame, 0., 0. , 0, "ONLY"); |
| 1053 | } |
| 3c084d9f |
1054 | // position the panels and the insulating material |
| 6c5ddcfa |
1055 | for (j=0; j<nPCB4[i]; j++){ |
| 1e8fff9c |
1056 | index++; |
| 6c5ddcfa |
1057 | Float_t xx = sensLength * (-nPCB4[i]/2.+j+.5); |
| 3c084d9f |
1058 | |
| 1059 | Float_t zPanel = spar[2] - panelpar[2]; |
| 1060 | gMC->Gspos("S07C",2*index-1,volNam7, xx, 0., zPanel , 0, "ONLY"); |
| 1061 | gMC->Gspos("S07C",2*index ,volNam7, xx, 0.,-zPanel , 0, "ONLY"); |
| 1062 | gMC->Gspos("S08C",2*index-1,volNam8, xx, 0., zPanel , 0, "ONLY"); |
| 1063 | gMC->Gspos("S08C",2*index ,volNam8, xx, 0.,-zPanel , 0, "ONLY"); |
| 1064 | |
| 1065 | gMC->Gspos("S07I",index,volNam7, xx, 0., 0 , 0, "ONLY"); |
| 1066 | gMC->Gspos("S08I",index,volNam8, xx, 0., 0 , 0, "ONLY"); |
| 1e8fff9c |
1067 | } |
| a9e2aefa |
1068 | } |
| 1e8fff9c |
1069 | |
| 3c084d9f |
1070 | // position the rohacell volume inside the panel volume |
| 1071 | gMC->Gspos("S07R",1,"S07C",0.,0.,0.,0,"ONLY"); |
| 1072 | gMC->Gspos("S08R",1,"S08C",0.,0.,0.,0,"ONLY"); |
| 1073 | |
| 1074 | // position the PCB volume inside the insulating material volume |
| 1075 | gMC->Gspos("S07P",1,"S07I",0.,0.,0.,0,"ONLY"); |
| 1076 | gMC->Gspos("S08P",1,"S08I",0.,0.,0.,0,"ONLY"); |
| 1077 | // position the horizontal frame volume inside the PCB volume |
| 1078 | gMC->Gspos("S07H",1,"S07P",0.,0.,0.,0,"ONLY"); |
| 1079 | gMC->Gspos("S08H",1,"S08P",0.,0.,0.,0,"ONLY"); |
| 1080 | // position the sensitive volume inside the horizontal frame volume |
| 1081 | gMC->Gsposp("S07G",1,"S07H",0.,0.,0.,0,"ONLY",senspar,3); |
| 1082 | gMC->Gsposp("S08G",1,"S08H",0.,0.,0.,0,"ONLY",senspar,3); |
| 3c084d9f |
1083 | // position the border volumes inside the PCB volume |
| 1084 | Float_t yborder = ( pcbHeight - bFrameHeight ) / 2.; |
| 1085 | gMC->Gspos("S07B",1,"S07P",0., yborder,0.,0,"ONLY"); |
| 1086 | gMC->Gspos("S07B",2,"S07P",0.,-yborder,0.,0,"ONLY"); |
| 1087 | gMC->Gspos("S08B",1,"S08P",0., yborder,0.,0,"ONLY"); |
| 1088 | gMC->Gspos("S08B",2,"S08P",0.,-yborder,0.,0,"ONLY"); |
| 1089 | |
| 1e8fff9c |
1090 | // create the NULOC volume and position it in the horizontal frame |
| 3c084d9f |
1091 | |
| 6c5ddcfa |
1092 | gMC->Gsvolu("S07N","BOX",nulocMaterial,nulocpar,3); |
| 1093 | gMC->Gsvolu("S08N","BOX",nulocMaterial,nulocpar,3); |
| 3c084d9f |
1094 | index = 0; |
| 21a18f36 |
1095 | for (xx = -xxmax; xx<=xxmax; xx+=2*nulocLength) { |
| 1e8fff9c |
1096 | index++; |
| 6c5ddcfa |
1097 | gMC->Gspos("S07N",2*index-1,"S07B", xx, 0.,-bFrameWidth/4., 0, "ONLY"); |
| 1098 | gMC->Gspos("S07N",2*index ,"S07B", xx, 0., bFrameWidth/4., 0, "ONLY"); |
| 1099 | gMC->Gspos("S08N",2*index-1,"S08B", xx, 0.,-bFrameWidth/4., 0, "ONLY"); |
| 1100 | gMC->Gspos("S08N",2*index ,"S08B", xx, 0., bFrameWidth/4., 0, "ONLY"); |
| 1e8fff9c |
1101 | } |
| a083207d |
1102 | |
| 1103 | // position the volumes approximating the circular section of the pipe |
| 21a18f36 |
1104 | Float_t yoffs = sensHeight/2. - yOverlap; |
| a083207d |
1105 | Float_t epsilon = 0.001; |
| 1106 | Int_t ndiv=6; |
| 1107 | Float_t divpar[3]; |
| 1108 | Double_t dydiv= sensHeight/ndiv; |
| 21a18f36 |
1109 | Double_t ydiv = yoffs -dydiv; |
| a083207d |
1110 | Int_t imax=0; |
| a083207d |
1111 | imax = 1; |
| 1112 | Float_t rmin = 40.; |
| 1113 | Float_t z1 = -spar[2], z2=2*spar[2]*1.01; |
| 1114 | for (Int_t idiv=0;idiv<ndiv; idiv++){ |
| 1115 | ydiv+= dydiv; |
| 425ebd0a |
1116 | Float_t xdiv = 0.; |
| a083207d |
1117 | if (ydiv<rmin) xdiv= rmin * TMath::Sin( TMath::ACos(ydiv/rmin) ); |
| 1118 | divpar[0] = (pcbLength-xdiv)/2.; |
| 1119 | divpar[1] = dydiv/2. - epsilon; |
| 1120 | divpar[2] = sensWidth/2.; |
| 425ebd0a |
1121 | Float_t xvol=(pcbLength+xdiv)/2.+1.999; |
| a083207d |
1122 | Float_t yvol=ydiv + dydiv/2.; |
| 1123 | gMC->Gsposp("S07G",imax+4*idiv+1,"C07M", xvol, yvol, z1+z2, 0, "ONLY",divpar,3); |
| 1124 | gMC->Gsposp("S08G",imax+4*idiv+1,"C08M", xvol, yvol, z1+z2, 0, "ONLY",divpar,3); |
| 1125 | gMC->Gsposp("S07G",imax+4*idiv+2,"C07M", xvol,-yvol, z1+z2, 0, "ONLY",divpar,3); |
| 1126 | gMC->Gsposp("S08G",imax+4*idiv+2,"C08M", xvol,-yvol, z1+z2, 0, "ONLY",divpar,3); |
| 1127 | gMC->Gsposp("S07G",imax+4*idiv+3,"C07M",-xvol, yvol, z1-z2, 0, "ONLY",divpar,3); |
| 1128 | gMC->Gsposp("S08G",imax+4*idiv+3,"C08M",-xvol, yvol, z1-z2, 0, "ONLY",divpar,3); |
| 1129 | gMC->Gsposp("S07G",imax+4*idiv+4,"C07M",-xvol,-yvol, z1-z2, 0, "ONLY",divpar,3); |
| 1130 | gMC->Gsposp("S08G",imax+4*idiv+4,"C08M",-xvol,-yvol, z1-z2, 0, "ONLY",divpar,3); |
| 1131 | } |
| 1132 | |
| 1133 | |
| 1134 | |
| 1135 | |
| 1136 | |
| b17c0c87 |
1137 | } |
| 3c084d9f |
1138 | |
| b17c0c87 |
1139 | if (stations[4]) { |
| 1140 | |
| 1e8fff9c |
1141 | |
| a9e2aefa |
1142 | //******************************************************************** |
| 1143 | // Station 5 ** |
| 1144 | //******************************************************************** |
| 1145 | // indices 1 and 2 for first and second chambers in the station |
| 1146 | // iChamber (first chamber) kept for other quanties than Z, |
| 1147 | // assumed to be the same in both chambers |
| 1148 | iChamber1 = iChamber = (AliMUONChamber*) (*fChambers)[8]; |
| 1149 | iChamber2 =(AliMUONChamber*) (*fChambers)[9]; |
| 1150 | zpos1=iChamber1->Z(); |
| 1151 | zpos2=iChamber2->Z(); |
| 1152 | dstation = zpos2 - zpos1; |
| b64652f5 |
1153 | // zfpos=-(iChamber->DGas()+dframez+iChamber->DAlu())/2; // not used any more |
| 3c084d9f |
1154 | |
| a9e2aefa |
1155 | // |
| 1156 | // Mother volume |
| 1157 | tpar[0] = iChamber->RInner()-dframep; |
| 1158 | tpar[1] = (iChamber->ROuter()+dframep)/TMath::Cos(phi); |
| 3c084d9f |
1159 | tpar[2] = dstation/5.; |
| a9e2aefa |
1160 | |
| 1161 | gMC->Gsvolu("C09M", "TUBE", idAir, tpar, 3); |
| 1162 | gMC->Gsvolu("C10M", "TUBE", idAir, tpar, 3); |
| 1163 | gMC->Gspos("C09M", 1, "ALIC", 0., 0., zpos1 , 0, "ONLY"); |
| 1164 | gMC->Gspos("C10M", 1, "ALIC", 0., 0., zpos2 , 0, "ONLY"); |
| a9e2aefa |
1165 | |
| a9e2aefa |
1166 | |
| 1e8fff9c |
1167 | const Int_t nSlats5 = 7; // number of slats per quadrant |
| a083207d |
1168 | const Int_t nPCB5[nSlats5] = {5,5,6,6,5,4,3}; // n PCB per slat |
| 21a18f36 |
1169 | const Float_t xpos5[nSlats5] = {38.5, 40., 0., 0., 0., 0., 0.}; |
| 6c5ddcfa |
1170 | Float_t slatLength5[nSlats5]; |
| 6c5ddcfa |
1171 | char volNam9[5]; |
| 1172 | char volNam10[5]; |
| f9f7c205 |
1173 | Float_t xSlat5; |
| 1174 | Float_t ySlat5; |
| 1e8fff9c |
1175 | |
| 6c5ddcfa |
1176 | for (i = 0; i<nSlats5; i++){ |
| 1177 | slatLength5[i] = pcbLength * nPCB5[i] + 2. * dSlatLength; |
| a083207d |
1178 | xSlat5 = slatLength5[i]/2. - vFrameLength/2. +xpos5[i]; |
| 21a18f36 |
1179 | if (i==1 || i==0) slatLength5[i] -= 2. *dSlatLength; // frame out in PCB with circular border |
| f9f7c205 |
1180 | ySlat5 = sensHeight * i - yOverlap * i; |
| 6c5ddcfa |
1181 | spar[0] = slatLength5[i]/2.; |
| 1182 | spar[1] = slatHeight/2.; |
| 3c084d9f |
1183 | spar[2] = slatWidth/2. * 1.01; |
| 1184 | Float_t dzCh5=spar[2]*1.01; |
| 1e8fff9c |
1185 | // zSlat to be checked (odd downstream or upstream?) |
| 3c084d9f |
1186 | Float_t zSlat = (i%2 ==0)? -spar[2] : spar[2]; |
| 6c5ddcfa |
1187 | sprintf(volNam9,"S09%d",i); |
| 1188 | gMC->Gsvolu(volNam9,"BOX",slatMaterial,spar,3); |
| e1ad7d45 |
1189 | gMC->Gspos(volNam9, i*4+1,"C09M", xSlat5, ySlat5, zSlat+2.*dzCh5, 0, "ONLY"); |
| 1190 | gMC->Gspos(volNam9, i*4+2,"C09M",-xSlat5, ySlat5, zSlat-2.*dzCh5, 0, "ONLY"); |
| f9f7c205 |
1191 | if (i>0) { |
| 3c084d9f |
1192 | gMC->Gspos(volNam9, i*4+3,"C09M", xSlat5,-ySlat5, zSlat+2.*dzCh5, 0, "ONLY"); |
| 1193 | gMC->Gspos(volNam9, i*4+4,"C09M",-xSlat5,-ySlat5, zSlat-2.*dzCh5, 0, "ONLY"); |
| f9f7c205 |
1194 | } |
| 6c5ddcfa |
1195 | sprintf(volNam10,"S10%d",i); |
| 1196 | gMC->Gsvolu(volNam10,"BOX",slatMaterial,spar,3); |
| e1ad7d45 |
1197 | gMC->Gspos(volNam10, i*4+1,"C10M", xSlat5, ySlat5, zSlat+2.*dzCh5, 0, "ONLY"); |
| 1198 | gMC->Gspos(volNam10, i*4+2,"C10M",-xSlat5, ySlat5, zSlat-2.*dzCh5, 0, "ONLY"); |
| f9f7c205 |
1199 | if (i>0) { |
| 3c084d9f |
1200 | gMC->Gspos(volNam10, i*4+3,"C10M", xSlat5,-ySlat5, zSlat+2.*dzCh5, 0, "ONLY"); |
| 1201 | gMC->Gspos(volNam10, i*4+4,"C10M",-xSlat5,-ySlat5, zSlat-2.*dzCh5, 0, "ONLY"); |
| f9f7c205 |
1202 | } |
| a9e2aefa |
1203 | } |
| 1204 | |
| 1e8fff9c |
1205 | // create the panel volume |
| 3c084d9f |
1206 | |
| 6c5ddcfa |
1207 | gMC->Gsvolu("S09C","BOX",panelMaterial,panelpar,3); |
| 1208 | gMC->Gsvolu("S10C","BOX",panelMaterial,panelpar,3); |
| 3c084d9f |
1209 | |
| 1e8fff9c |
1210 | // create the rohacell volume |
| 3c084d9f |
1211 | |
| 6c5ddcfa |
1212 | gMC->Gsvolu("S09R","BOX",rohaMaterial,rohapar,3); |
| 1213 | gMC->Gsvolu("S10R","BOX",rohaMaterial,rohapar,3); |
| 3c084d9f |
1214 | |
| 1215 | // create the insulating material volume |
| 1216 | |
| 1217 | gMC->Gsvolu("S09I","BOX",insuMaterial,insupar,3); |
| 1218 | gMC->Gsvolu("S10I","BOX",insuMaterial,insupar,3); |
| 1219 | |
| 1220 | // create the PCB volume |
| 1221 | |
| 1222 | gMC->Gsvolu("S09P","BOX",pcbMaterial,pcbpar,3); |
| 1223 | gMC->Gsvolu("S10P","BOX",pcbMaterial,pcbpar,3); |
| 1224 | |
| 1225 | // create the sensitive volumes, |
| 1226 | |
| 1227 | gMC->Gsvolu("S09G","BOX",sensMaterial,0,0); |
| 1228 | gMC->Gsvolu("S10G","BOX",sensMaterial,0,0); |
| 3c084d9f |
1229 | |
| 1e8fff9c |
1230 | // create the vertical frame volume |
| 3c084d9f |
1231 | |
| 6c5ddcfa |
1232 | gMC->Gsvolu("S09V","BOX",vFrameMaterial,vFramepar,3); |
| 1233 | gMC->Gsvolu("S10V","BOX",vFrameMaterial,vFramepar,3); |
| 1e8fff9c |
1234 | |
| 1235 | // create the horizontal frame volume |
| 3c084d9f |
1236 | |
| 6c5ddcfa |
1237 | gMC->Gsvolu("S09H","BOX",hFrameMaterial,hFramepar,3); |
| 1238 | gMC->Gsvolu("S10H","BOX",hFrameMaterial,hFramepar,3); |
| 1e8fff9c |
1239 | |
| 1240 | // create the horizontal border volume |
| 1241 | |
| 6c5ddcfa |
1242 | gMC->Gsvolu("S09B","BOX",bFrameMaterial,bFramepar,3); |
| 1243 | gMC->Gsvolu("S10B","BOX",bFrameMaterial,bFramepar,3); |
| 1e8fff9c |
1244 | |
| 3c084d9f |
1245 | index=0; |
| 6c5ddcfa |
1246 | for (i = 0; i<nSlats5; i++){ |
| 1247 | sprintf(volNam9,"S09%d",i); |
| 1248 | sprintf(volNam10,"S10%d",i); |
| 1249 | Float_t xvFrame = (slatLength5[i] - vFrameLength)/2.; |
| 3c084d9f |
1250 | // position the vertical frames |
| 21a18f36 |
1251 | if (i!=1 && i!=0) { |
| a083207d |
1252 | gMC->Gspos("S09V",2*i-1,volNam9, xvFrame, 0., 0. , 0, "ONLY"); |
| 1253 | gMC->Gspos("S09V",2*i ,volNam9,-xvFrame, 0., 0. , 0, "ONLY"); |
| 1254 | gMC->Gspos("S10V",2*i-1,volNam10, xvFrame, 0., 0. , 0, "ONLY"); |
| 1255 | gMC->Gspos("S10V",2*i ,volNam10,-xvFrame, 0., 0. , 0, "ONLY"); |
| 1256 | } |
| 3c084d9f |
1257 | |
| 1258 | // position the panels and the insulating material |
| 6c5ddcfa |
1259 | for (j=0; j<nPCB5[i]; j++){ |
| 1e8fff9c |
1260 | index++; |
| 3c084d9f |
1261 | Float_t xx = sensLength * (-nPCB5[i]/2.+j+.5); |
| 1262 | |
| 1263 | Float_t zPanel = spar[2] - panelpar[2]; |
| 1264 | gMC->Gspos("S09C",2*index-1,volNam9, xx, 0., zPanel , 0, "ONLY"); |
| 1265 | gMC->Gspos("S09C",2*index ,volNam9, xx, 0.,-zPanel , 0, "ONLY"); |
| 1266 | gMC->Gspos("S10C",2*index-1,volNam10, xx, 0., zPanel , 0, "ONLY"); |
| 1267 | gMC->Gspos("S10C",2*index ,volNam10, xx, 0.,-zPanel , 0, "ONLY"); |
| 1268 | |
| 1269 | gMC->Gspos("S09I",index,volNam9, xx, 0., 0 , 0, "ONLY"); |
| 1270 | gMC->Gspos("S10I",index,volNam10, xx, 0., 0 , 0, "ONLY"); |
| 1e8fff9c |
1271 | } |
| 1272 | } |
| 1273 | |
| 3c084d9f |
1274 | // position the rohacell volume inside the panel volume |
| 1275 | gMC->Gspos("S09R",1,"S09C",0.,0.,0.,0,"ONLY"); |
| 1276 | gMC->Gspos("S10R",1,"S10C",0.,0.,0.,0,"ONLY"); |
| 1277 | |
| 1278 | // position the PCB volume inside the insulating material volume |
| 1279 | gMC->Gspos("S09P",1,"S09I",0.,0.,0.,0,"ONLY"); |
| 1280 | gMC->Gspos("S10P",1,"S10I",0.,0.,0.,0,"ONLY"); |
| 1281 | // position the horizontal frame volume inside the PCB volume |
| 1282 | gMC->Gspos("S09H",1,"S09P",0.,0.,0.,0,"ONLY"); |
| 1283 | gMC->Gspos("S10H",1,"S10P",0.,0.,0.,0,"ONLY"); |
| 1284 | // position the sensitive volume inside the horizontal frame volume |
| 1285 | gMC->Gsposp("S09G",1,"S09H",0.,0.,0.,0,"ONLY",senspar,3); |
| 1286 | gMC->Gsposp("S10G",1,"S10H",0.,0.,0.,0,"ONLY",senspar,3); |
| 3c084d9f |
1287 | // position the border volumes inside the PCB volume |
| 1288 | Float_t yborder = ( pcbHeight - bFrameHeight ) / 2.; |
| 1289 | gMC->Gspos("S09B",1,"S09P",0., yborder,0.,0,"ONLY"); |
| 1290 | gMC->Gspos("S09B",2,"S09P",0.,-yborder,0.,0,"ONLY"); |
| 1291 | gMC->Gspos("S10B",1,"S10P",0., yborder,0.,0,"ONLY"); |
| 1292 | gMC->Gspos("S10B",2,"S10P",0.,-yborder,0.,0,"ONLY"); |
| 1293 | |
| 1e8fff9c |
1294 | // create the NULOC volume and position it in the horizontal frame |
| 3c084d9f |
1295 | |
| 6c5ddcfa |
1296 | gMC->Gsvolu("S09N","BOX",nulocMaterial,nulocpar,3); |
| 1297 | gMC->Gsvolu("S10N","BOX",nulocMaterial,nulocpar,3); |
| 3c084d9f |
1298 | index = 0; |
| 21a18f36 |
1299 | for (xx = -xxmax; xx<=xxmax; xx+=2*nulocLength) { |
| 1e8fff9c |
1300 | index++; |
| 6c5ddcfa |
1301 | gMC->Gspos("S09N",2*index-1,"S09B", xx, 0.,-bFrameWidth/4., 0, "ONLY"); |
| 1302 | gMC->Gspos("S09N",2*index ,"S09B", xx, 0., bFrameWidth/4., 0, "ONLY"); |
| 1303 | gMC->Gspos("S10N",2*index-1,"S10B", xx, 0.,-bFrameWidth/4., 0, "ONLY"); |
| 1304 | gMC->Gspos("S10N",2*index ,"S10B", xx, 0., bFrameWidth/4., 0, "ONLY"); |
| a9e2aefa |
1305 | } |
| a083207d |
1306 | // position the volumes approximating the circular section of the pipe |
| 21a18f36 |
1307 | Float_t yoffs = sensHeight/2. - yOverlap; |
| a083207d |
1308 | Float_t epsilon = 0.001; |
| 1309 | Int_t ndiv=6; |
| 1310 | Float_t divpar[3]; |
| 1311 | Double_t dydiv= sensHeight/ndiv; |
| 21a18f36 |
1312 | Double_t ydiv = yoffs -dydiv; |
| a083207d |
1313 | Int_t imax=0; |
| 1314 | // for (Int_t islat=0; islat<nSlats3; islat++) imax += nPCB3[islat]; |
| 1315 | imax = 1; |
| 1316 | Float_t rmin = 40.; |
| 1317 | Float_t z1 = spar[2], z2=2*spar[2]*1.01; |
| 1318 | for (Int_t idiv=0;idiv<ndiv; idiv++){ |
| 1319 | ydiv+= dydiv; |
| 425ebd0a |
1320 | Float_t xdiv = 0.; |
| a083207d |
1321 | if (ydiv<rmin) xdiv= rmin * TMath::Sin( TMath::ACos(ydiv/rmin) ); |
| 1322 | divpar[0] = (pcbLength-xdiv)/2.; |
| 1323 | divpar[1] = dydiv/2. - epsilon; |
| 1324 | divpar[2] = sensWidth/2.; |
| 425ebd0a |
1325 | Float_t xvol=(pcbLength+xdiv)/2. + 1.999; |
| a083207d |
1326 | Float_t yvol=ydiv + dydiv/2.; |
| 1327 | gMC->Gsposp("S09G",imax+4*idiv+1,"C09M", xvol, yvol, z1+z2, 0, "ONLY",divpar,3); |
| 1328 | gMC->Gsposp("S10G",imax+4*idiv+1,"C10M", xvol, yvol, z1+z2, 0, "ONLY",divpar,3); |
| 1329 | gMC->Gsposp("S09G",imax+4*idiv+2,"C09M", xvol,-yvol, z1+z2, 0, "ONLY",divpar,3); |
| 1330 | gMC->Gsposp("S10G",imax+4*idiv+2,"C10M", xvol,-yvol, z1+z2, 0, "ONLY",divpar,3); |
| 1331 | gMC->Gsposp("S09G",imax+4*idiv+3,"C09M",-xvol, yvol, z1-z2, 0, "ONLY",divpar,3); |
| 1332 | gMC->Gsposp("S10G",imax+4*idiv+3,"C10M",-xvol, yvol, z1-z2, 0, "ONLY",divpar,3); |
| 1333 | gMC->Gsposp("S09G",imax+4*idiv+4,"C09M",-xvol,-yvol, z1-z2, 0, "ONLY",divpar,3); |
| 1334 | gMC->Gsposp("S10G",imax+4*idiv+4,"C10M",-xvol,-yvol, z1-z2, 0, "ONLY",divpar,3); |
| 1335 | } |
| 1336 | |
| b17c0c87 |
1337 | } |
| 1338 | |
| 1e8fff9c |
1339 | |
| a9e2aefa |
1340 | /////////////////////////////////////// |
| 1341 | // GEOMETRY FOR THE TRIGGER CHAMBERS // |
| 1342 | /////////////////////////////////////// |
| 1343 | |
| 1344 | // 03/00 P. Dupieux : introduce a slighly more realistic |
| 1345 | // geom. of the trigger readout planes with |
| 1346 | // 2 Zpos per trigger plane (alternate |
| 1347 | // between left and right of the trigger) |
| 1348 | |
| 1349 | // Parameters of the Trigger Chambers |
| 1350 | |
| 236fe2c5 |
1351 | // DP03-01 introduce dead zone of +/- 2 cm arround x=0 (as in TDR, fig3.27) |
| 1352 | const Float_t kDXZERO=2.; |
| a9e2aefa |
1353 | const Float_t kXMC1MIN=34.; |
| 1354 | const Float_t kXMC1MED=51.; |
| 1355 | const Float_t kXMC1MAX=272.; |
| 1356 | const Float_t kYMC1MIN=34.; |
| 1357 | const Float_t kYMC1MAX=51.; |
| 1358 | const Float_t kRMIN1=50.; |
| 236fe2c5 |
1359 | // DP03-01 const Float_t kRMAX1=62.; |
| 1360 | const Float_t kRMAX1=64.; |
| a9e2aefa |
1361 | const Float_t kRMIN2=50.; |
| 236fe2c5 |
1362 | // DP03-01 const Float_t kRMAX2=66.; |
| 1363 | const Float_t kRMAX2=68.; |
| a9e2aefa |
1364 | |
| 1365 | // zposition of the middle of the gas gap in mother vol |
| 1366 | const Float_t kZMCm=-3.6; |
| 1367 | const Float_t kZMCp=+3.6; |
| 1368 | |
| 1369 | |
| 1370 | // TRIGGER STATION 1 - TRIGGER STATION 1 - TRIGGER STATION 1 |
| 1371 | |
| 1372 | // iChamber 1 and 2 for first and second chambers in the station |
| 1373 | // iChamber (first chamber) kept for other quanties than Z, |
| 1374 | // assumed to be the same in both chambers |
| 1375 | iChamber1 = iChamber = (AliMUONChamber*) (*fChambers)[10]; |
| 1376 | iChamber2 =(AliMUONChamber*) (*fChambers)[11]; |
| 1377 | |
| 1378 | // 03/00 |
| 1379 | // zpos1 and zpos2 are now the middle of the first and second |
| 1380 | // plane of station 1 : |
| 1381 | // zpos1=(16075+15995)/2=16035 mm, thick/2=40 mm |
| 1382 | // zpos2=(16225+16145)/2=16185 mm, thick/2=40 mm |
| 1383 | // |
| 1384 | // zpos1m=15999 mm , zpos1p=16071 mm (middles of gas gaps) |
| 1385 | // zpos2m=16149 mm , zpos2p=16221 mm (middles of gas gaps) |
| 1386 | // rem : the total thickness accounts for 1 mm of al on both |
| 1387 | // side of the RPCs (see zpos1 and zpos2), as previously |
| 1388 | |
| 1389 | zpos1=iChamber1->Z(); |
| 1390 | zpos2=iChamber2->Z(); |
| 1391 | |
| 1392 | |
| 1393 | // Mother volume definition |
| 1394 | tpar[0] = iChamber->RInner(); |
| 1395 | tpar[1] = iChamber->ROuter(); |
| 1396 | tpar[2] = 4.0; |
| 1397 | gMC->Gsvolu("CM11", "TUBE", idAir, tpar, 3); |
| 1398 | gMC->Gsvolu("CM12", "TUBE", idAir, tpar, 3); |
| 1399 | |
| 1400 | // Definition of the flange between the beam shielding and the RPC |
| 1401 | tpar[0]= kRMIN1; |
| 1402 | tpar[1]= kRMAX1; |
| 1403 | tpar[2]= 4.0; |
| 1404 | |
| 1405 | gMC->Gsvolu("CF1A", "TUBE", idAlu1, tpar, 3); //Al |
| 1406 | gMC->Gspos("CF1A", 1, "CM11", 0., 0., 0., 0, "MANY"); |
| 1407 | gMC->Gspos("CF1A", 2, "CM12", 0., 0., 0., 0, "MANY"); |
| 1408 | |
| 1409 | |
| 1410 | // FIRST PLANE OF STATION 1 |
| 1411 | |
| 1412 | // ratios of zpos1m/zpos1p and inverse for first plane |
| 1413 | Float_t zmp=(zpos1-3.6)/(zpos1+3.6); |
| 1414 | Float_t zpm=1./zmp; |
| 1415 | |
| 1416 | |
| 1417 | // Definition of prototype for chambers in the first plane |
| 1418 | |
| 1419 | tpar[0]= 0.; |
| 1420 | tpar[1]= 0.; |
| 1421 | tpar[2]= 0.; |
| 1422 | |
| 1423 | gMC->Gsvolu("CC1A", "BOX ", idAlu1, tpar, 0); //Al |
| 1424 | gMC->Gsvolu("CB1A", "BOX ", idtmed[1107], tpar, 0); //Bakelite |
| 1425 | gMC->Gsvolu("CG1A", "BOX ", idtmed[1106], tpar, 0); //Gas streamer |
| 1426 | |
| 1427 | // chamber type A |
| 1428 | tpar[0] = -1.; |
| 1429 | tpar[1] = -1.; |
| 1430 | |
| 236fe2c5 |
1431 | // DP03-01 const Float_t kXMC1A=kXMC1MED+(kXMC1MAX-kXMC1MED)/2.; |
| 1432 | const Float_t kXMC1A=kDXZERO+kXMC1MED+(kXMC1MAX-kXMC1MED)/2.; |
| a9e2aefa |
1433 | const Float_t kYMC1Am=0.; |
| 1434 | const Float_t kYMC1Ap=0.; |
| 1435 | |
| 1436 | tpar[2] = 0.1; |
| 1437 | gMC->Gsposp("CG1A", 1, "CB1A", 0., 0., 0., 0, "ONLY",tpar,3); |
| 1438 | tpar[2] = 0.3; |
| 1439 | gMC->Gsposp("CB1A", 1, "CC1A", 0., 0., 0., 0, "ONLY",tpar,3); |
| 1440 | |
| 1441 | tpar[2] = 0.4; |
| 1442 | tpar[0] = (kXMC1MAX-kXMC1MED)/2.; |
| 1443 | tpar[1] = kYMC1MIN; |
| 1444 | |
| 1445 | gMC->Gsposp("CC1A", 1, "CM11",kXMC1A,kYMC1Am,kZMCm, 0, "ONLY", tpar, 3); |
| 1446 | gMC->Gsposp("CC1A", 2, "CM11",-kXMC1A,kYMC1Ap,kZMCp, 0, "ONLY", tpar, 3); |
| 1447 | |
| 1448 | // chamber type B |
| 1449 | Float_t tpar1save=tpar[1]; |
| 1450 | Float_t y1msave=kYMC1Am; |
| 1451 | Float_t y1psave=kYMC1Ap; |
| 1452 | |
| 1453 | tpar[0] = (kXMC1MAX-kXMC1MIN)/2.; |
| 1454 | tpar[1] = (kYMC1MAX-kYMC1MIN)/2.; |
| 1455 | |
| 236fe2c5 |
1456 | // DP03-01 const Float_t kXMC1B=kXMC1MIN+tpar[0]; |
| 1457 | const Float_t kXMC1B=kDXZERO+kXMC1MIN+tpar[0]; |
| a9e2aefa |
1458 | const Float_t kYMC1Bp=(y1msave+tpar1save)*zpm+tpar[1]; |
| 1459 | const Float_t kYMC1Bm=(y1psave+tpar1save)*zmp+tpar[1]; |
| 1460 | |
| 1461 | gMC->Gsposp("CC1A", 3, "CM11",kXMC1B,kYMC1Bp,kZMCp, 0, "ONLY", tpar, 3); |
| 1462 | gMC->Gsposp("CC1A", 4, "CM11",-kXMC1B,kYMC1Bm,kZMCm, 0, "ONLY", tpar, 3); |
| 1463 | gMC->Gsposp("CC1A", 5, "CM11",kXMC1B,-kYMC1Bp,kZMCp, 0, "ONLY", tpar, 3); |
| 1464 | gMC->Gsposp("CC1A", 6, "CM11",-kXMC1B,-kYMC1Bm,kZMCm, 0, "ONLY", tpar, 3); |
| 1465 | |
| 1466 | // chamber type C (end of type B !!) |
| 1467 | tpar1save=tpar[1]; |
| 1468 | y1msave=kYMC1Bm; |
| 1469 | y1psave=kYMC1Bp; |
| 1470 | |
| 1471 | tpar[0] = kXMC1MAX/2; |
| 1472 | tpar[1] = kYMC1MAX/2; |
| 1473 | |
| 236fe2c5 |
1474 | |
| 1475 | // DP03-01 const Float_t kXMC1C=tpar[0]; |
| 1476 | const Float_t kXMC1C=kDXZERO+tpar[0]; |
| a9e2aefa |
1477 | // warning : same Z than type B |
| 1478 | const Float_t kYMC1Cp=(y1psave+tpar1save)*1.+tpar[1]; |
| 1479 | const Float_t kYMC1Cm=(y1msave+tpar1save)*1.+tpar[1]; |
| 1480 | |
| 1481 | gMC->Gsposp("CC1A", 7, "CM11",kXMC1C,kYMC1Cp,kZMCp, 0, "ONLY", tpar, 3); |
| 1482 | gMC->Gsposp("CC1A", 8, "CM11",-kXMC1C,kYMC1Cm,kZMCm, 0, "ONLY", tpar, 3); |
| 1483 | gMC->Gsposp("CC1A", 9, "CM11",kXMC1C,-kYMC1Cp,kZMCp, 0, "ONLY", tpar, 3); |
| 1484 | gMC->Gsposp("CC1A", 10, "CM11",-kXMC1C,-kYMC1Cm,kZMCm, 0, "ONLY", tpar, 3); |
| 1485 | |
| 1486 | // chamber type D, E and F (same size) |
| 1487 | tpar1save=tpar[1]; |
| 1488 | y1msave=kYMC1Cm; |
| 1489 | y1psave=kYMC1Cp; |
| 1490 | |
| 1491 | tpar[0] = kXMC1MAX/2.; |
| 1492 | tpar[1] = kYMC1MIN; |
| 1493 | |
| 236fe2c5 |
1494 | // DP03-01 const Float_t kXMC1D=tpar[0]; |
| 1495 | const Float_t kXMC1D=kDXZERO+tpar[0]; |
| a9e2aefa |
1496 | const Float_t kYMC1Dp=(y1msave+tpar1save)*zpm+tpar[1]; |
| 1497 | const Float_t kYMC1Dm=(y1psave+tpar1save)*zmp+tpar[1]; |
| 1498 | |
| 1499 | gMC->Gsposp("CC1A", 11, "CM11",kXMC1D,kYMC1Dm,kZMCm, 0, "ONLY", tpar, 3); |
| 1500 | gMC->Gsposp("CC1A", 12, "CM11",-kXMC1D,kYMC1Dp,kZMCp, 0, "ONLY", tpar, 3); |
| 1501 | gMC->Gsposp("CC1A", 13, "CM11",kXMC1D,-kYMC1Dm,kZMCm, 0, "ONLY", tpar, 3); |
| 1502 | gMC->Gsposp("CC1A", 14, "CM11",-kXMC1D,-kYMC1Dp,kZMCp, 0, "ONLY", tpar, 3); |
| 1503 | |
| 1504 | |
| 1505 | tpar1save=tpar[1]; |
| 1506 | y1msave=kYMC1Dm; |
| 1507 | y1psave=kYMC1Dp; |
| 1508 | const Float_t kYMC1Ep=(y1msave+tpar1save)*zpm+tpar[1]; |
| 1509 | const Float_t kYMC1Em=(y1psave+tpar1save)*zmp+tpar[1]; |
| 1510 | |
| 1511 | gMC->Gsposp("CC1A", 15, "CM11",kXMC1D,kYMC1Ep,kZMCp, 0, "ONLY", tpar, 3); |
| 1512 | gMC->Gsposp("CC1A", 16, "CM11",-kXMC1D,kYMC1Em,kZMCm, 0, "ONLY", tpar, 3); |
| 1513 | gMC->Gsposp("CC1A", 17, "CM11",kXMC1D,-kYMC1Ep,kZMCp, 0, "ONLY", tpar, 3); |
| 1514 | gMC->Gsposp("CC1A", 18, "CM11",-kXMC1D,-kYMC1Em,kZMCm, 0, "ONLY", tpar, 3); |
| 1515 | |
| 1516 | tpar1save=tpar[1]; |
| 1517 | y1msave=kYMC1Em; |
| 1518 | y1psave=kYMC1Ep; |
| 1519 | const Float_t kYMC1Fp=(y1msave+tpar1save)*zpm+tpar[1]; |
| 1520 | const Float_t kYMC1Fm=(y1psave+tpar1save)*zmp+tpar[1]; |
| 1521 | |
| 1522 | gMC->Gsposp("CC1A", 19, "CM11",kXMC1D,kYMC1Fm,kZMCm, 0, "ONLY", tpar, 3); |
| 1523 | gMC->Gsposp("CC1A", 20, "CM11",-kXMC1D,kYMC1Fp,kZMCp, 0, "ONLY", tpar, 3); |
| 1524 | gMC->Gsposp("CC1A", 21, "CM11",kXMC1D,-kYMC1Fm,kZMCm, 0, "ONLY", tpar, 3); |
| 1525 | gMC->Gsposp("CC1A", 22, "CM11",-kXMC1D,-kYMC1Fp,kZMCp, 0, "ONLY", tpar, 3); |
| 1526 | |
| 1527 | // Positioning first plane in ALICE |
| 1528 | gMC->Gspos("CM11", 1, "ALIC", 0., 0., zpos1, 0, "ONLY"); |
| 1529 | |
| 1530 | // End of geometry definition for the first plane of station 1 |
| 1531 | |
| 1532 | |
| 1533 | |
| 1534 | // SECOND PLANE OF STATION 1 : proj ratio = zpos2/zpos1 |
| 1535 | |
| 1536 | const Float_t kZ12=zpos2/zpos1; |
| 1537 | |
| 1538 | // Definition of prototype for chambers in the second plane of station 1 |
| 1539 | |
| 1540 | tpar[0]= 0.; |
| 1541 | tpar[1]= 0.; |
| 1542 | tpar[2]= 0.; |
| 1543 | |
| 1544 | gMC->Gsvolu("CC2A", "BOX ", idAlu1, tpar, 0); //Al |
| 1545 | gMC->Gsvolu("CB2A", "BOX ", idtmed[1107], tpar, 0); //Bakelite |
| 1546 | gMC->Gsvolu("CG2A", "BOX ", idtmed[1106], tpar, 0); //Gas streamer |
| 1547 | |
| 1548 | // chamber type A |
| 1549 | tpar[0] = -1.; |
| 1550 | tpar[1] = -1.; |
| 1551 | |
| 1552 | const Float_t kXMC2A=kXMC1A*kZ12; |
| 1553 | const Float_t kYMC2Am=0.; |
| 1554 | const Float_t kYMC2Ap=0.; |
| 1555 | |
| 1556 | tpar[2] = 0.1; |
| 1557 | gMC->Gsposp("CG2A", 1, "CB2A", 0., 0., 0., 0, "ONLY",tpar,3); |
| 1558 | tpar[2] = 0.3; |
| 1559 | gMC->Gsposp("CB2A", 1, "CC2A", 0., 0., 0., 0, "ONLY",tpar,3); |
| 1560 | |
| 1561 | tpar[2] = 0.4; |
| 1562 | tpar[0] = ((kXMC1MAX-kXMC1MED)/2.)*kZ12; |
| 1563 | tpar[1] = kYMC1MIN*kZ12; |
| 1564 | |
| 1565 | gMC->Gsposp("CC2A", 1, "CM12",kXMC2A,kYMC2Am,kZMCm, 0, "ONLY", tpar, 3); |
| 1566 | gMC->Gsposp("CC2A", 2, "CM12",-kXMC2A,kYMC2Ap,kZMCp, 0, "ONLY", tpar, 3); |
| 1567 | |
| 1568 | |
| 1569 | // chamber type B |
| 1570 | |
| 1571 | tpar[0] = ((kXMC1MAX-kXMC1MIN)/2.)*kZ12; |
| 1572 | tpar[1] = ((kYMC1MAX-kYMC1MIN)/2.)*kZ12; |
| 1573 | |
| 1574 | const Float_t kXMC2B=kXMC1B*kZ12; |
| 1575 | const Float_t kYMC2Bp=kYMC1Bp*kZ12; |
| 1576 | const Float_t kYMC2Bm=kYMC1Bm*kZ12; |
| 1577 | gMC->Gsposp("CC2A", 3, "CM12",kXMC2B,kYMC2Bp,kZMCp, 0, "ONLY", tpar, 3); |
| 1578 | gMC->Gsposp("CC2A", 4, "CM12",-kXMC2B,kYMC2Bm,kZMCm, 0, "ONLY", tpar, 3); |
| 1579 | gMC->Gsposp("CC2A", 5, "CM12",kXMC2B,-kYMC2Bp,kZMCp, 0, "ONLY", tpar, 3); |
| 1580 | gMC->Gsposp("CC2A", 6, "CM12",-kXMC2B,-kYMC2Bm,kZMCm, 0, "ONLY", tpar, 3); |
| 1581 | |
| 1582 | |
| 1583 | // chamber type C (end of type B !!) |
| 1584 | |
| 1585 | tpar[0] = (kXMC1MAX/2)*kZ12; |
| 1586 | tpar[1] = (kYMC1MAX/2)*kZ12; |
| 1587 | |
| 1588 | const Float_t kXMC2C=kXMC1C*kZ12; |
| 1589 | const Float_t kYMC2Cp=kYMC1Cp*kZ12; |
| 1590 | const Float_t kYMC2Cm=kYMC1Cm*kZ12; |
| 1591 | gMC->Gsposp("CC2A", 7, "CM12",kXMC2C,kYMC2Cp,kZMCp, 0, "ONLY", tpar, 3); |
| 1592 | gMC->Gsposp("CC2A", 8, "CM12",-kXMC2C,kYMC2Cm,kZMCm, 0, "ONLY", tpar, 3); |
| 1593 | gMC->Gsposp("CC2A", 9, "CM12",kXMC2C,-kYMC2Cp,kZMCp, 0, "ONLY", tpar, 3); |
| 1594 | gMC->Gsposp("CC2A", 10, "CM12",-kXMC2C,-kYMC2Cm,kZMCm, 0, "ONLY", tpar, 3); |
| 1595 | |
| 1596 | // chamber type D, E and F (same size) |
| 1597 | |
| 1598 | tpar[0] = (kXMC1MAX/2.)*kZ12; |
| 1599 | tpar[1] = kYMC1MIN*kZ12; |
| 1600 | |
| 1601 | const Float_t kXMC2D=kXMC1D*kZ12; |
| 1602 | const Float_t kYMC2Dp=kYMC1Dp*kZ12; |
| 1603 | const Float_t kYMC2Dm=kYMC1Dm*kZ12; |
| 1604 | gMC->Gsposp("CC2A", 11, "CM12",kXMC2D,kYMC2Dm,kZMCm, 0, "ONLY", tpar, 3); |
| 1605 | gMC->Gsposp("CC2A", 12, "CM12",-kXMC2D,kYMC2Dp,kZMCp, 0, "ONLY", tpar, 3); |
| 1606 | gMC->Gsposp("CC2A", 13, "CM12",kXMC2D,-kYMC2Dm,kZMCm, 0, "ONLY", tpar, 3); |
| 1607 | gMC->Gsposp("CC2A", 14, "CM12",-kXMC2D,-kYMC2Dp,kZMCp, 0, "ONLY", tpar, 3); |
| 1608 | |
| 1609 | const Float_t kYMC2Ep=kYMC1Ep*kZ12; |
| 1610 | const Float_t kYMC2Em=kYMC1Em*kZ12; |
| 1611 | gMC->Gsposp("CC2A", 15, "CM12",kXMC2D,kYMC2Ep,kZMCp, 0, "ONLY", tpar, 3); |
| 1612 | gMC->Gsposp("CC2A", 16, "CM12",-kXMC2D,kYMC2Em,kZMCm, 0, "ONLY", tpar, 3); |
| 1613 | gMC->Gsposp("CC2A", 17, "CM12",kXMC2D,-kYMC2Ep,kZMCp, 0, "ONLY", tpar, 3); |
| 1614 | gMC->Gsposp("CC2A", 18, "CM12",-kXMC2D,-kYMC2Em,kZMCm, 0, "ONLY", tpar, 3); |
| 1615 | |
| 1616 | |
| 1617 | const Float_t kYMC2Fp=kYMC1Fp*kZ12; |
| 1618 | const Float_t kYMC2Fm=kYMC1Fm*kZ12; |
| 1619 | gMC->Gsposp("CC2A", 19, "CM12",kXMC2D,kYMC2Fm,kZMCm, 0, "ONLY", tpar, 3); |
| 1620 | gMC->Gsposp("CC2A", 20, "CM12",-kXMC2D,kYMC2Fp,kZMCp, 0, "ONLY", tpar, 3); |
| 1621 | gMC->Gsposp("CC2A", 21, "CM12",kXMC2D,-kYMC2Fm,kZMCm, 0, "ONLY", tpar, 3); |
| 1622 | gMC->Gsposp("CC2A", 22, "CM12",-kXMC2D,-kYMC2Fp,kZMCp, 0, "ONLY", tpar, 3); |
| 1623 | |
| 1624 | // Positioning second plane of station 1 in ALICE |
| 1625 | |
| 1626 | gMC->Gspos("CM12", 1, "ALIC", 0., 0., zpos2, 0, "ONLY"); |
| 1627 | |
| 1628 | // End of geometry definition for the second plane of station 1 |
| 1629 | |
| 1630 | |
| 1631 | |
| 1632 | // TRIGGER STATION 2 - TRIGGER STATION 2 - TRIGGER STATION 2 |
| 1633 | |
| 1634 | // 03/00 |
| 1635 | // zpos3 and zpos4 are now the middle of the first and second |
| 1636 | // plane of station 2 : |
| 1637 | // zpos3=(17075+16995)/2=17035 mm, thick/2=40 mm |
| 1638 | // zpos4=(17225+17145)/2=17185 mm, thick/2=40 mm |
| 1639 | // |
| 1640 | // zpos3m=16999 mm , zpos3p=17071 mm (middles of gas gaps) |
| 1641 | // zpos4m=17149 mm , zpos4p=17221 mm (middles of gas gaps) |
| 1642 | // rem : the total thickness accounts for 1 mm of al on both |
| 1643 | // side of the RPCs (see zpos3 and zpos4), as previously |
| 1644 | iChamber1 = iChamber = (AliMUONChamber*) (*fChambers)[12]; |
| 1645 | iChamber2 =(AliMUONChamber*) (*fChambers)[13]; |
| 1646 | Float_t zpos3=iChamber1->Z(); |
| 1647 | Float_t zpos4=iChamber2->Z(); |
| 1648 | |
| 1649 | |
| 1650 | // Mother volume definition |
| 1651 | tpar[0] = iChamber->RInner(); |
| 1652 | tpar[1] = iChamber->ROuter(); |
| 1653 | tpar[2] = 4.0; |
| 1654 | |
| 1655 | gMC->Gsvolu("CM21", "TUBE", idAir, tpar, 3); |
| 1656 | gMC->Gsvolu("CM22", "TUBE", idAir, tpar, 3); |
| 1657 | |
| 1658 | // Definition of the flange between the beam shielding and the RPC |
| 1659 | // ???? interface shielding |
| 1660 | |
| 1661 | tpar[0]= kRMIN2; |
| 1662 | tpar[1]= kRMAX2; |
| 1663 | tpar[2]= 4.0; |
| 1664 | |
| 1665 | gMC->Gsvolu("CF2A", "TUBE", idAlu1, tpar, 3); //Al |
| 1666 | gMC->Gspos("CF2A", 1, "CM21", 0., 0., 0., 0, "MANY"); |
| 1667 | gMC->Gspos("CF2A", 2, "CM22", 0., 0., 0., 0, "MANY"); |
| 1668 | |
| 1669 | |
| 1670 | |
| 1671 | // FIRST PLANE OF STATION 2 : proj ratio = zpos3/zpos1 |
| 1672 | |
| 1673 | const Float_t kZ13=zpos3/zpos1; |
| 1674 | |
| 1675 | // Definition of prototype for chambers in the first plane of station 2 |
| 1676 | tpar[0]= 0.; |
| 1677 | tpar[1]= 0.; |
| 1678 | tpar[2]= 0.; |
| 1679 | |
| 1680 | gMC->Gsvolu("CC3A", "BOX ", idAlu1, tpar, 0); //Al |
| 1681 | gMC->Gsvolu("CB3A", "BOX ", idtmed[1107], tpar, 0); //Bakelite |
| 1682 | gMC->Gsvolu("CG3A", "BOX ", idtmed[1106], tpar, 0); //Gas streamer |
| 1683 | |
| 1684 | |
| 1685 | // chamber type A |
| 1686 | tpar[0] = -1.; |
| 1687 | tpar[1] = -1.; |
| 1688 | |
| 1689 | const Float_t kXMC3A=kXMC1A*kZ13; |
| 1690 | const Float_t kYMC3Am=0.; |
| 1691 | const Float_t kYMC3Ap=0.; |
| 1692 | |
| 1693 | tpar[2] = 0.1; |
| 1694 | gMC->Gsposp("CG3A", 1, "CB3A", 0., 0., 0., 0, "ONLY",tpar,3); |
| 1695 | tpar[2] = 0.3; |
| 1696 | gMC->Gsposp("CB3A", 1, "CC3A", 0., 0., 0., 0, "ONLY",tpar,3); |
| 1697 | |
| 1698 | tpar[2] = 0.4; |
| 1699 | tpar[0] = ((kXMC1MAX-kXMC1MED)/2.)*kZ13; |
| 1700 | tpar[1] = kYMC1MIN*kZ13; |
| 1701 | gMC->Gsposp("CC3A", 1, "CM21",kXMC3A,kYMC3Am,kZMCm, 0, "ONLY", tpar, 3); |
| 1702 | gMC->Gsposp("CC3A", 2, "CM21",-kXMC3A,kYMC3Ap,kZMCp, 0, "ONLY", tpar, 3); |
| 1703 | |
| 1704 | |
| 1705 | // chamber type B |
| 1706 | tpar[0] = ((kXMC1MAX-kXMC1MIN)/2.)*kZ13; |
| 1707 | tpar[1] = ((kYMC1MAX-kYMC1MIN)/2.)*kZ13; |
| 1708 | |
| 1709 | const Float_t kXMC3B=kXMC1B*kZ13; |
| 1710 | const Float_t kYMC3Bp=kYMC1Bp*kZ13; |
| 1711 | const Float_t kYMC3Bm=kYMC1Bm*kZ13; |
| 1712 | gMC->Gsposp("CC3A", 3, "CM21",kXMC3B,kYMC3Bp,kZMCp, 0, "ONLY", tpar, 3); |
| 1713 | gMC->Gsposp("CC3A", 4, "CM21",-kXMC3B,kYMC3Bm,kZMCm, 0, "ONLY", tpar, 3); |
| 1714 | gMC->Gsposp("CC3A", 5, "CM21",kXMC3B,-kYMC3Bp,kZMCp, 0, "ONLY", tpar, 3); |
| 1715 | gMC->Gsposp("CC3A", 6, "CM21",-kXMC3B,-kYMC3Bm,kZMCm, 0, "ONLY", tpar, 3); |
| 1716 | |
| 1717 | |
| 1718 | // chamber type C (end of type B !!) |
| 1719 | tpar[0] = (kXMC1MAX/2)*kZ13; |
| 1720 | tpar[1] = (kYMC1MAX/2)*kZ13; |
| 1721 | |
| 1722 | const Float_t kXMC3C=kXMC1C*kZ13; |
| 1723 | const Float_t kYMC3Cp=kYMC1Cp*kZ13; |
| 1724 | const Float_t kYMC3Cm=kYMC1Cm*kZ13; |
| 1725 | gMC->Gsposp("CC3A", 7, "CM21",kXMC3C,kYMC3Cp,kZMCp, 0, "ONLY", tpar, 3); |
| 1726 | gMC->Gsposp("CC3A", 8, "CM21",-kXMC3C,kYMC3Cm,kZMCm, 0, "ONLY", tpar, 3); |
| 1727 | gMC->Gsposp("CC3A", 9, "CM21",kXMC3C,-kYMC3Cp,kZMCp, 0, "ONLY", tpar, 3); |
| 1728 | gMC->Gsposp("CC3A", 10, "CM21",-kXMC3C,-kYMC3Cm,kZMCm, 0, "ONLY", tpar, 3); |
| 1729 | |
| 1730 | |
| 1731 | // chamber type D, E and F (same size) |
| 1732 | |
| 1733 | tpar[0] = (kXMC1MAX/2.)*kZ13; |
| 1734 | tpar[1] = kYMC1MIN*kZ13; |
| 1735 | |
| 1736 | const Float_t kXMC3D=kXMC1D*kZ13; |
| 1737 | const Float_t kYMC3Dp=kYMC1Dp*kZ13; |
| 1738 | const Float_t kYMC3Dm=kYMC1Dm*kZ13; |
| 1739 | gMC->Gsposp("CC3A", 11, "CM21",kXMC3D,kYMC3Dm,kZMCm, 0, "ONLY", tpar, 3); |
| 1740 | gMC->Gsposp("CC3A", 12, "CM21",-kXMC3D,kYMC3Dp,kZMCp, 0, "ONLY", tpar, 3); |
| 1741 | gMC->Gsposp("CC3A", 13, "CM21",kXMC3D,-kYMC3Dm,kZMCm, 0, "ONLY", tpar, 3); |
| 1742 | gMC->Gsposp("CC3A", 14, "CM21",-kXMC3D,-kYMC3Dp,kZMCp, 0, "ONLY", tpar, 3); |
| 1743 | |
| 1744 | const Float_t kYMC3Ep=kYMC1Ep*kZ13; |
| 1745 | const Float_t kYMC3Em=kYMC1Em*kZ13; |
| 1746 | gMC->Gsposp("CC3A", 15, "CM21",kXMC3D,kYMC3Ep,kZMCp, 0, "ONLY", tpar, 3); |
| 1747 | gMC->Gsposp("CC3A", 16, "CM21",-kXMC3D,kYMC3Em,kZMCm, 0, "ONLY", tpar, 3); |
| 1748 | gMC->Gsposp("CC3A", 17, "CM21",kXMC3D,-kYMC3Ep,kZMCp, 0, "ONLY", tpar, 3); |
| 1749 | gMC->Gsposp("CC3A", 18, "CM21",-kXMC3D,-kYMC3Em,kZMCm, 0, "ONLY", tpar, 3); |
| 1750 | |
| 1751 | const Float_t kYMC3Fp=kYMC1Fp*kZ13; |
| 1752 | const Float_t kYMC3Fm=kYMC1Fm*kZ13; |
| 1753 | gMC->Gsposp("CC3A", 19, "CM21",kXMC3D,kYMC3Fm,kZMCm, 0, "ONLY", tpar, 3); |
| 1754 | gMC->Gsposp("CC3A", 20, "CM21",-kXMC3D,kYMC3Fp,kZMCp, 0, "ONLY", tpar, 3); |
| 1755 | gMC->Gsposp("CC3A", 21, "CM21",kXMC3D,-kYMC3Fm,kZMCm, 0, "ONLY", tpar, 3); |
| 1756 | gMC->Gsposp("CC3A", 22, "CM21",-kXMC3D,-kYMC3Fp,kZMCp, 0, "ONLY", tpar, 3); |
| 1757 | |
| 1758 | |
| 1759 | // Positioning first plane of station 2 in ALICE |
| 1760 | |
| 1761 | gMC->Gspos("CM21", 1, "ALIC", 0., 0., zpos3, 0, "ONLY"); |
| 1762 | |
| 1763 | // End of geometry definition for the first plane of station 2 |
| 1764 | |
| 1765 | |
| 1766 | |
| 1767 | |
| 1768 | // SECOND PLANE OF STATION 2 : proj ratio = zpos4/zpos1 |
| 1769 | |
| 1770 | const Float_t kZ14=zpos4/zpos1; |
| 1771 | |
| 1772 | // Definition of prototype for chambers in the second plane of station 2 |
| 1773 | |
| 1774 | tpar[0]= 0.; |
| 1775 | tpar[1]= 0.; |
| 1776 | tpar[2]= 0.; |
| 1777 | |
| 1778 | gMC->Gsvolu("CC4A", "BOX ", idAlu1, tpar, 0); //Al |
| 1779 | gMC->Gsvolu("CB4A", "BOX ", idtmed[1107], tpar, 0); //Bakelite |
| 1780 | gMC->Gsvolu("CG4A", "BOX ", idtmed[1106], tpar, 0); //Gas streamer |
| 1781 | |
| 1782 | // chamber type A |
| 1783 | tpar[0] = -1.; |
| 1784 | tpar[1] = -1.; |
| 1785 | |
| 1786 | const Float_t kXMC4A=kXMC1A*kZ14; |
| 1787 | const Float_t kYMC4Am=0.; |
| 1788 | const Float_t kYMC4Ap=0.; |
| 1789 | |
| 1790 | tpar[2] = 0.1; |
| 1791 | gMC->Gsposp("CG4A", 1, "CB4A", 0., 0., 0., 0, "ONLY",tpar,3); |
| 1792 | tpar[2] = 0.3; |
| 1793 | gMC->Gsposp("CB4A", 1, "CC4A", 0., 0., 0., 0, "ONLY",tpar,3); |
| 1794 | |
| 1795 | tpar[2] = 0.4; |
| 1796 | tpar[0] = ((kXMC1MAX-kXMC1MED)/2.)*kZ14; |
| 1797 | tpar[1] = kYMC1MIN*kZ14; |
| 1798 | gMC->Gsposp("CC4A", 1, "CM22",kXMC4A,kYMC4Am,kZMCm, 0, "ONLY", tpar, 3); |
| 1799 | gMC->Gsposp("CC4A", 2, "CM22",-kXMC4A,kYMC4Ap,kZMCp, 0, "ONLY", tpar, 3); |
| 1800 | |
| 1801 | |
| 1802 | // chamber type B |
| 1803 | tpar[0] = ((kXMC1MAX-kXMC1MIN)/2.)*kZ14; |
| 1804 | tpar[1] = ((kYMC1MAX-kYMC1MIN)/2.)*kZ14; |
| 1805 | |
| 1806 | const Float_t kXMC4B=kXMC1B*kZ14; |
| 1807 | const Float_t kYMC4Bp=kYMC1Bp*kZ14; |
| 1808 | const Float_t kYMC4Bm=kYMC1Bm*kZ14; |
| 1809 | gMC->Gsposp("CC4A", 3, "CM22",kXMC4B,kYMC4Bp,kZMCp, 0, "ONLY", tpar, 3); |
| 1810 | gMC->Gsposp("CC4A", 4, "CM22",-kXMC4B,kYMC4Bm,kZMCm, 0, "ONLY", tpar, 3); |
| 1811 | gMC->Gsposp("CC4A", 5, "CM22",kXMC4B,-kYMC4Bp,kZMCp, 0, "ONLY", tpar, 3); |
| 1812 | gMC->Gsposp("CC4A", 6, "CM22",-kXMC4B,-kYMC4Bm,kZMCm, 0, "ONLY", tpar, 3); |
| 1813 | |
| 1814 | |
| 1815 | // chamber type C (end of type B !!) |
| 1816 | tpar[0] =(kXMC1MAX/2)*kZ14; |
| 1817 | tpar[1] = (kYMC1MAX/2)*kZ14; |
| 1818 | |
| 1819 | const Float_t kXMC4C=kXMC1C*kZ14; |
| 1820 | const Float_t kYMC4Cp=kYMC1Cp*kZ14; |
| 1821 | const Float_t kYMC4Cm=kYMC1Cm*kZ14; |
| 1822 | gMC->Gsposp("CC4A", 7, "CM22",kXMC4C,kYMC4Cp,kZMCp, 0, "ONLY", tpar, 3); |
| 1823 | gMC->Gsposp("CC4A", 8, "CM22",-kXMC4C,kYMC4Cm,kZMCm, 0, "ONLY", tpar, 3); |
| 1824 | gMC->Gsposp("CC4A", 9, "CM22",kXMC4C,-kYMC4Cp,kZMCp, 0, "ONLY", tpar, 3); |
| 1825 | gMC->Gsposp("CC4A", 10, "CM22",-kXMC4C,-kYMC4Cm,kZMCm, 0, "ONLY", tpar, 3); |
| 1826 | |
| 1827 | |
| 1828 | // chamber type D, E and F (same size) |
| 1829 | tpar[0] = (kXMC1MAX/2.)*kZ14; |
| 1830 | tpar[1] = kYMC1MIN*kZ14; |
| 1831 | |
| 1832 | const Float_t kXMC4D=kXMC1D*kZ14; |
| 1833 | const Float_t kYMC4Dp=kYMC1Dp*kZ14; |
| 1834 | const Float_t kYMC4Dm=kYMC1Dm*kZ14; |
| 1835 | gMC->Gsposp("CC4A", 11, "CM22",kXMC4D,kYMC4Dm,kZMCm, 0, "ONLY", tpar, 3); |
| 1836 | gMC->Gsposp("CC4A", 12, "CM22",-kXMC4D,kYMC4Dp,kZMCp, 0, "ONLY", tpar, 3); |
| 1837 | gMC->Gsposp("CC4A", 13, "CM22",kXMC4D,-kYMC4Dm,kZMCm, 0, "ONLY", tpar, 3); |
| 1838 | gMC->Gsposp("CC4A", 14, "CM22",-kXMC4D,-kYMC4Dp,kZMCp, 0, "ONLY", tpar, 3); |
| 1839 | |
| 1840 | const Float_t kYMC4Ep=kYMC1Ep*kZ14; |
| 1841 | const Float_t kYMC4Em=kYMC1Em*kZ14; |
| 1842 | gMC->Gsposp("CC4A", 15, "CM22",kXMC4D,kYMC4Ep,kZMCp, 0, "ONLY", tpar, 3); |
| 1843 | gMC->Gsposp("CC4A", 16, "CM22",-kXMC4D,kYMC4Em,kZMCm, 0, "ONLY", tpar, 3); |
| 1844 | gMC->Gsposp("CC4A", 17, "CM22",kXMC4D,-kYMC4Ep,kZMCp, 0, "ONLY", tpar, 3); |
| 1845 | gMC->Gsposp("CC4A", 18, "CM22",-kXMC4D,-kYMC4Em,kZMCm, 0, "ONLY", tpar, 3); |
| 1846 | |
| 1847 | const Float_t kYMC4Fp=kYMC1Fp*kZ14; |
| 1848 | const Float_t kYMC4Fm=kYMC1Fm*kZ14; |
| 1849 | gMC->Gsposp("CC4A", 19, "CM22",kXMC4D,kYMC4Fm,kZMCm, 0, "ONLY", tpar, 3); |
| 1850 | gMC->Gsposp("CC4A", 20, "CM22",-kXMC4D,kYMC4Fp,kZMCp, 0, "ONLY", tpar, 3); |
| 1851 | gMC->Gsposp("CC4A", 21, "CM22",kXMC4D,-kYMC4Fm,kZMCm, 0, "ONLY", tpar, 3); |
| 1852 | gMC->Gsposp("CC4A", 22, "CM22",-kXMC4D,-kYMC4Fp,kZMCp, 0, "ONLY", tpar, 3); |
| 1853 | |
| 1854 | |
| 1855 | // Positioning second plane of station 2 in ALICE |
| 1856 | |
| 1857 | gMC->Gspos("CM22", 1, "ALIC", 0., 0., zpos4, 0, "ONLY"); |
| 1858 | |
| 1859 | // End of geometry definition for the second plane of station 2 |
| 1860 | |
| 1861 | // End of trigger geometry definition |
| 1862 | |
| 1863 | } |
| 1864 | |
| 1865 | |
| 1866 | |
| 1867 | //___________________________________________ |
| 1868 | void AliMUONv1::CreateMaterials() |
| 1869 | { |
| 1870 | // *** DEFINITION OF AVAILABLE MUON MATERIALS *** |
| 1871 | // |
| b64652f5 |
1872 | // Ar-CO2 gas (80%+20%) |
| a9e2aefa |
1873 | Float_t ag1[3] = { 39.95,12.01,16. }; |
| 1874 | Float_t zg1[3] = { 18.,6.,8. }; |
| 1875 | Float_t wg1[3] = { .8,.0667,.13333 }; |
| 1876 | Float_t dg1 = .001821; |
| 1877 | // |
| 1878 | // Ar-buthane-freon gas -- trigger chambers |
| 1879 | Float_t atr1[4] = { 39.95,12.01,1.01,19. }; |
| 1880 | Float_t ztr1[4] = { 18.,6.,1.,9. }; |
| 1881 | Float_t wtr1[4] = { .56,.1262857,.2857143,.028 }; |
| 1882 | Float_t dtr1 = .002599; |
| 1883 | // |
| 1884 | // Ar-CO2 gas |
| 1885 | Float_t agas[3] = { 39.95,12.01,16. }; |
| 1886 | Float_t zgas[3] = { 18.,6.,8. }; |
| 1887 | Float_t wgas[3] = { .74,.086684,.173316 }; |
| 1888 | Float_t dgas = .0018327; |
| 1889 | // |
| 1890 | // Ar-Isobutane gas (80%+20%) -- tracking |
| 1891 | Float_t ag[3] = { 39.95,12.01,1.01 }; |
| 1892 | Float_t zg[3] = { 18.,6.,1. }; |
| 1893 | Float_t wg[3] = { .8,.057,.143 }; |
| 1894 | Float_t dg = .0019596; |
| 1895 | // |
| 1896 | // Ar-Isobutane-Forane-SF6 gas (49%+7%+40%+4%) -- trigger |
| 1897 | Float_t atrig[5] = { 39.95,12.01,1.01,19.,32.066 }; |
| 1898 | Float_t ztrig[5] = { 18.,6.,1.,9.,16. }; |
| 1899 | Float_t wtrig[5] = { .49,1.08,1.5,1.84,0.04 }; |
| 1900 | Float_t dtrig = .0031463; |
| 1901 | // |
| 1902 | // bakelite |
| 1903 | |
| 1904 | Float_t abak[3] = {12.01 , 1.01 , 16.}; |
| 1905 | Float_t zbak[3] = {6. , 1. , 8.}; |
| 1906 | Float_t wbak[3] = {6. , 6. , 1.}; |
| 1907 | Float_t dbak = 1.4; |
| 1908 | |
| 1909 | Float_t epsil, stmin, deemax, tmaxfd, stemax; |
| 1910 | |
| 1911 | Int_t iSXFLD = gAlice->Field()->Integ(); |
| 1912 | Float_t sXMGMX = gAlice->Field()->Max(); |
| 1913 | // |
| 1914 | // --- Define the various materials for GEANT --- |
| 1915 | AliMaterial(9, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2); |
| 1916 | AliMaterial(10, "ALUMINIUM$", 26.98, 13., 2.7, 8.9, 37.2); |
| 1917 | AliMaterial(15, "AIR$ ", 14.61, 7.3, .001205, 30423.24, 67500); |
| 1918 | AliMixture(19, "Bakelite$", abak, zbak, dbak, -3, wbak); |
| 1919 | AliMixture(20, "ArC4H10 GAS$", ag, zg, dg, 3, wg); |
| 1920 | AliMixture(21, "TRIG GAS$", atrig, ztrig, dtrig, -5, wtrig); |
| 1921 | AliMixture(22, "ArCO2 80%$", ag1, zg1, dg1, 3, wg1); |
| 1922 | AliMixture(23, "Ar-freon $", atr1, ztr1, dtr1, 4, wtr1); |
| 1923 | AliMixture(24, "ArCO2 GAS$", agas, zgas, dgas, 3, wgas); |
| 1e8fff9c |
1924 | // materials for slat: |
| 1925 | // Sensitive area: gas (already defined) |
| 1926 | // PCB: copper |
| 1927 | // insulating material and frame: vetronite |
| 1928 | // walls: carbon, rohacell, carbon |
| 1929 | Float_t aglass[5]={12.01, 28.09, 16., 10.8, 23.}; |
| 1930 | Float_t zglass[5]={ 6., 14., 8., 5., 11.}; |
| 1931 | Float_t wglass[5]={ 0.5, 0.105, 0.355, 0.03, 0.01}; |
| 1932 | Float_t dglass=1.74; |
| 1933 | |
| 1934 | // rohacell: C9 H13 N1 O2 |
| 1935 | Float_t arohac[4] = {12.01, 1.01, 14.010, 16.}; |
| 1936 | Float_t zrohac[4] = { 6., 1., 7., 8.}; |
| 1937 | Float_t wrohac[4] = { 9., 13., 1., 2.}; |
| 1938 | Float_t drohac = 0.03; |
| 1939 | |
| 1940 | AliMaterial(31, "COPPER$", 63.54, 29., 8.96, 1.4, 0.); |
| 1941 | AliMixture(32, "Vetronite$",aglass, zglass, dglass, 5, wglass); |
| 1942 | AliMaterial(33, "Carbon$", 12.01, 6., 2.265, 18.8, 49.9); |
| 1943 | AliMixture(34, "Rohacell$", arohac, zrohac, drohac, -4, wrohac); |
| 1944 | |
| a9e2aefa |
1945 | |
| 1946 | epsil = .001; // Tracking precision, |
| 1947 | stemax = -1.; // Maximum displacement for multiple scat |
| 1948 | tmaxfd = -20.; // Maximum angle due to field deflection |
| 1949 | deemax = -.3; // Maximum fractional energy loss, DLS |
| 1950 | stmin = -.8; |
| 1951 | // |
| 1952 | // Air |
| 1953 | AliMedium(1, "AIR_CH_US ", 15, 1, iSXFLD, sXMGMX, tmaxfd, stemax, deemax, epsil, stmin); |
| 1954 | // |
| 1955 | // Aluminum |
| 1956 | |
| 1957 | AliMedium(4, "ALU_CH_US ", 9, 0, iSXFLD, sXMGMX, tmaxfd, fMaxStepAlu, |
| 1958 | fMaxDestepAlu, epsil, stmin); |
| 1959 | AliMedium(5, "ALU_CH_US ", 10, 0, iSXFLD, sXMGMX, tmaxfd, fMaxStepAlu, |
| 1960 | fMaxDestepAlu, epsil, stmin); |
| 1961 | // |
| 1962 | // Ar-isoC4H10 gas |
| 1963 | |
| 1964 | AliMedium(6, "AR_CH_US ", 20, 1, iSXFLD, sXMGMX, tmaxfd, fMaxStepGas, |
| 1965 | fMaxDestepGas, epsil, stmin); |
| 1966 | // |
| 1967 | // Ar-Isobuthane-Forane-SF6 gas |
| 1968 | |
| 1969 | AliMedium(7, "GAS_CH_TRIGGER ", 21, 1, iSXFLD, sXMGMX, tmaxfd, stemax, deemax, epsil, stmin); |
| 1970 | |
| 1971 | AliMedium(8, "BAKE_CH_TRIGGER ", 19, 0, iSXFLD, sXMGMX, tmaxfd, fMaxStepAlu, |
| 1972 | fMaxDestepAlu, epsil, stmin); |
| 1973 | |
| 1974 | AliMedium(9, "ARG_CO2 ", 22, 1, iSXFLD, sXMGMX, tmaxfd, fMaxStepGas, |
| 1975 | fMaxDestepAlu, epsil, stmin); |
| 1e8fff9c |
1976 | // tracking media for slats: check the parameters!! |
| 1977 | AliMedium(11, "PCB_COPPER ", 31, 0, iSXFLD, sXMGMX, tmaxfd, |
| 1978 | fMaxStepAlu, fMaxDestepAlu, epsil, stmin); |
| 1979 | AliMedium(12, "VETRONITE ", 32, 0, iSXFLD, sXMGMX, tmaxfd, |
| 1980 | fMaxStepAlu, fMaxDestepAlu, epsil, stmin); |
| 1981 | AliMedium(13, "CARBON ", 33, 0, iSXFLD, sXMGMX, tmaxfd, |
| 1982 | fMaxStepAlu, fMaxDestepAlu, epsil, stmin); |
| 1983 | AliMedium(14, "Rohacell ", 34, 0, iSXFLD, sXMGMX, tmaxfd, |
| 1984 | fMaxStepAlu, fMaxDestepAlu, epsil, stmin); |
| a9e2aefa |
1985 | } |
| 1986 | |
| 1987 | //___________________________________________ |
| 1988 | |
| 1989 | void AliMUONv1::Init() |
| 1990 | { |
| 1991 | // |
| 1992 | // Initialize Tracking Chambers |
| 1993 | // |
| 1994 | |
| 9e1a0ddb |
1995 | if(fDebug) printf("\n%s: Start Init for version 1 - CPC chamber type\n\n",ClassName()); |
| e17592e9 |
1996 | Int_t i; |
| f665c1ea |
1997 | for (i=0; i<AliMUONConstants::NCh(); i++) { |
| a9e2aefa |
1998 | ( (AliMUONChamber*) (*fChambers)[i])->Init(); |
| 1999 | } |
| 2000 | |
| 2001 | // |
| 2002 | // Set the chamber (sensitive region) GEANT identifier |
| 2003 | AliMC* gMC = AliMC::GetMC(); |
| 2004 | ((AliMUONChamber*)(*fChambers)[0])->SetGid(gMC->VolId("C01G")); |
| 2005 | ((AliMUONChamber*)(*fChambers)[1])->SetGid(gMC->VolId("C02G")); |
| b17c0c87 |
2006 | |
| a9e2aefa |
2007 | ((AliMUONChamber*)(*fChambers)[2])->SetGid(gMC->VolId("C03G")); |
| 2008 | ((AliMUONChamber*)(*fChambers)[3])->SetGid(gMC->VolId("C04G")); |
| b17c0c87 |
2009 | |
| 1e8fff9c |
2010 | ((AliMUONChamber*)(*fChambers)[4])->SetGid(gMC->VolId("S05G")); |
| 2011 | ((AliMUONChamber*)(*fChambers)[5])->SetGid(gMC->VolId("S06G")); |
| b17c0c87 |
2012 | |
| 1e8fff9c |
2013 | ((AliMUONChamber*)(*fChambers)[6])->SetGid(gMC->VolId("S07G")); |
| 2014 | ((AliMUONChamber*)(*fChambers)[7])->SetGid(gMC->VolId("S08G")); |
| b17c0c87 |
2015 | |
| 1e8fff9c |
2016 | ((AliMUONChamber*)(*fChambers)[8])->SetGid(gMC->VolId("S09G")); |
| 2017 | ((AliMUONChamber*)(*fChambers)[9])->SetGid(gMC->VolId("S10G")); |
| b17c0c87 |
2018 | |
| a9e2aefa |
2019 | ((AliMUONChamber*)(*fChambers)[10])->SetGid(gMC->VolId("CG1A")); |
| 2020 | ((AliMUONChamber*)(*fChambers)[11])->SetGid(gMC->VolId("CG2A")); |
| 2021 | ((AliMUONChamber*)(*fChambers)[12])->SetGid(gMC->VolId("CG3A")); |
| 2022 | ((AliMUONChamber*)(*fChambers)[13])->SetGid(gMC->VolId("CG4A")); |
| 2023 | |
| 9e1a0ddb |
2024 | if(fDebug) printf("\n%s: Finished Init for version 1 - CPC chamber type\n",ClassName()); |
| a9e2aefa |
2025 | |
| 2026 | //cp |
| 9e1a0ddb |
2027 | if(fDebug) printf("\n%s: Start Init for Trigger Circuits\n",ClassName()); |
| f665c1ea |
2028 | for (i=0; i<AliMUONConstants::NTriggerCircuit(); i++) { |
| a9e2aefa |
2029 | ( (AliMUONTriggerCircuit*) (*fTriggerCircuits)[i])->Init(i); |
| 2030 | } |
| 9e1a0ddb |
2031 | if(fDebug) printf("%s: Finished Init for Trigger Circuits\n",ClassName()); |
| a9e2aefa |
2032 | //cp |
| 2033 | |
| 2034 | } |
| 2035 | |
| 2036 | //___________________________________________ |
| 2037 | void AliMUONv1::StepManager() |
| 2038 | { |
| 2039 | Int_t copy, id; |
| 2040 | static Int_t idvol; |
| 2041 | static Int_t vol[2]; |
| 2042 | Int_t ipart; |
| 2043 | TLorentzVector pos; |
| 2044 | TLorentzVector mom; |
| 2045 | Float_t theta,phi; |
| 2046 | Float_t destep, step; |
| 681d067b |
2047 | |
| 1e8fff9c |
2048 | static Float_t eloss, eloss2, xhit, yhit, zhit, tof, tlength; |
| 2eb55fab |
2049 | const Float_t kBig = 1.e10; |
| a9e2aefa |
2050 | static Float_t hits[15]; |
| 2051 | |
| 2052 | TClonesArray &lhits = *fHits; |
| 2053 | |
| 2054 | // |
| a9e2aefa |
2055 | // |
| 2056 | // Only charged tracks |
| 2057 | if( !(gMC->TrackCharge()) ) return; |
| 2058 | // |
| 2059 | // Only gas gap inside chamber |
| 2060 | // Tag chambers and record hits when track enters |
| 2061 | idvol=-1; |
| 2062 | id=gMC->CurrentVolID(copy); |
| 2063 | |
| 2eb55fab |
2064 | for (Int_t i = 1; i <= AliMUONConstants::NCh(); i++) { |
| a9e2aefa |
2065 | if(id==((AliMUONChamber*)(*fChambers)[i-1])->GetGid()){ |
| 2eb55fab |
2066 | vol[0] = i; |
| 2067 | idvol = i-1; |
| a9e2aefa |
2068 | } |
| 2069 | } |
| 2070 | if (idvol == -1) return; |
| 2071 | // |
| 2072 | // Get current particle id (ipart), track position (pos) and momentum (mom) |
| 2073 | gMC->TrackPosition(pos); |
| 2074 | gMC->TrackMomentum(mom); |
| 2075 | |
| 2076 | ipart = gMC->TrackPid(); |
| a9e2aefa |
2077 | |
| 2078 | // |
| 2079 | // momentum loss and steplength in last step |
| 2080 | destep = gMC->Edep(); |
| 2081 | step = gMC->TrackStep(); |
| 2082 | |
| 2083 | // |
| 2084 | // record hits when track enters ... |
| 2085 | if( gMC->IsTrackEntering()) { |
| 2086 | gMC->SetMaxStep(fMaxStepGas); |
| 2087 | Double_t tc = mom[0]*mom[0]+mom[1]*mom[1]; |
| 2088 | Double_t rt = TMath::Sqrt(tc); |
| 2089 | Double_t pmom = TMath::Sqrt(tc+mom[2]*mom[2]); |
| 2eb55fab |
2090 | Double_t tx = mom[0]/pmom; |
| 2091 | Double_t ty = mom[1]/pmom; |
| 2092 | Double_t tz = mom[2]/pmom; |
| 2093 | Double_t s = ((AliMUONChamber*)(*fChambers)[idvol]) |
| a9e2aefa |
2094 | ->ResponseModel() |
| 2095 | ->Pitch()/tz; |
| 2096 | theta = Float_t(TMath::ATan2(rt,Double_t(mom[2])))*kRaddeg; |
| 2097 | phi = Float_t(TMath::ATan2(Double_t(mom[1]),Double_t(mom[0])))*kRaddeg; |
| 2098 | hits[0] = Float_t(ipart); // Geant3 particle type |
| 2eb55fab |
2099 | hits[1] = pos[0]+s*tx; // X-position for hit |
| 2100 | hits[2] = pos[1]+s*ty; // Y-position for hit |
| 2101 | hits[3] = pos[2]+s*tz; // Z-position for hit |
| a9e2aefa |
2102 | hits[4] = theta; // theta angle of incidence |
| 2103 | hits[5] = phi; // phi angle of incidence |
| 2eb55fab |
2104 | hits[8] = (Float_t) fNPadHits; // first padhit |
| a9e2aefa |
2105 | hits[9] = -1; // last pad hit |
| 2eb55fab |
2106 | hits[10] = mom[3]; // hit momentum P |
| 2107 | hits[11] = mom[0]; // Px |
| 2108 | hits[12] = mom[1]; // Py |
| 2109 | hits[13] = mom[2]; // Pz |
| a9e2aefa |
2110 | tof=gMC->TrackTime(); |
| 2eb55fab |
2111 | hits[14] = tof; // Time of flight |
| 2112 | tlength = 0; |
| 2113 | eloss = 0; |
| 2114 | eloss2 = 0; |
| 2115 | xhit = pos[0]; |
| 2116 | yhit = pos[1]; |
| 2117 | zhit = pos[2]; |
| 681d067b |
2118 | Chamber(idvol).ChargeCorrelationInit(); |
| a9e2aefa |
2119 | // Only if not trigger chamber |
| 1e8fff9c |
2120 | |
| 2121 | |
| 2122 | |
| 2123 | |
| 2eb55fab |
2124 | if(idvol < AliMUONConstants::NTrackingCh()) { |
| a9e2aefa |
2125 | // |
| 2126 | // Initialize hit position (cursor) in the segmentation model |
| 2127 | ((AliMUONChamber*) (*fChambers)[idvol]) |
| 2128 | ->SigGenInit(pos[0], pos[1], pos[2]); |
| 2129 | } else { |
| 2130 | //geant3->Gpcxyz(); |
| 2131 | //printf("In the Trigger Chamber #%d\n",idvol-9); |
| 2132 | } |
| 2133 | } |
| 2134 | eloss2+=destep; |
| 2135 | |
| 2136 | // |
| 2137 | // Calculate the charge induced on a pad (disintegration) in case |
| 2138 | // |
| 2139 | // Mip left chamber ... |
| 2140 | if( gMC->IsTrackExiting() || gMC->IsTrackStop() || gMC->IsTrackDisappeared()){ |
| 2141 | gMC->SetMaxStep(kBig); |
| 2142 | eloss += destep; |
| 2143 | tlength += step; |
| 2144 | |
| 802a864d |
2145 | Float_t x0,y0,z0; |
| 2146 | Float_t localPos[3]; |
| 2147 | Float_t globalPos[3] = {pos[0], pos[1], pos[2]}; |
| 802a864d |
2148 | gMC->Gmtod(globalPos,localPos,1); |
| 2149 | |
| 2eb55fab |
2150 | if(idvol < AliMUONConstants::NTrackingCh()) { |
| a9e2aefa |
2151 | // tracking chambers |
| 2152 | x0 = 0.5*(xhit+pos[0]); |
| 2153 | y0 = 0.5*(yhit+pos[1]); |
| 1e8fff9c |
2154 | z0 = 0.5*(zhit+pos[2]); |
| a9e2aefa |
2155 | } else { |
| 2156 | // trigger chambers |
| 2eb55fab |
2157 | x0 = xhit; |
| 2158 | y0 = yhit; |
| 2159 | z0 = 0.; |
| a9e2aefa |
2160 | } |
| 2161 | |
| 1e8fff9c |
2162 | |
| 802a864d |
2163 | if (eloss >0) MakePadHits(x0,y0,z0,eloss,tof,idvol); |
| a9e2aefa |
2164 | |
| 2165 | |
| 2eb55fab |
2166 | hits[6] = tlength; // track length |
| 2167 | hits[7] = eloss2; // de/dx energy loss |
| 2168 | |
| a9e2aefa |
2169 | if (fNPadHits > (Int_t)hits[8]) { |
| 2eb55fab |
2170 | hits[8] = hits[8]+1; |
| 2171 | hits[9] = (Float_t) fNPadHits; |
| a9e2aefa |
2172 | } |
| 2eb55fab |
2173 | // |
| 2174 | // new hit |
| 2175 | |
| a9e2aefa |
2176 | new(lhits[fNhits++]) |
| 2eb55fab |
2177 | AliMUONHit(fIshunt, gAlice->CurrentTrack(), vol,hits); |
| a9e2aefa |
2178 | eloss = 0; |
| 2179 | // |
| 2180 | // Check additional signal generation conditions |
| 2181 | // defined by the segmentation |
| a75f073c |
2182 | // model (boundary crossing conditions) |
| 2183 | // only for tracking chambers |
| a9e2aefa |
2184 | } else if |
| a75f073c |
2185 | ((idvol < AliMUONConstants::NTrackingCh()) && |
| 2186 | ((AliMUONChamber*) (*fChambers)[idvol])->SigGenCond(pos[0], pos[1], pos[2])) |
| a9e2aefa |
2187 | { |
| 2188 | ((AliMUONChamber*) (*fChambers)[idvol]) |
| 2189 | ->SigGenInit(pos[0], pos[1], pos[2]); |
| 802a864d |
2190 | |
| 2191 | Float_t localPos[3]; |
| 2192 | Float_t globalPos[3] = {pos[0], pos[1], pos[2]}; |
| 2193 | gMC->Gmtod(globalPos,localPos,1); |
| 2194 | |
| e0f71fb7 |
2195 | eloss += destep; |
| 802a864d |
2196 | |
| a75f073c |
2197 | if (eloss > 0 && idvol < AliMUONConstants::NTrackingCh()) |
| 1e8fff9c |
2198 | MakePadHits(0.5*(xhit+pos[0]),0.5*(yhit+pos[1]),pos[2],eloss,tof,idvol); |
| a9e2aefa |
2199 | xhit = pos[0]; |
| 2200 | yhit = pos[1]; |
| e0f71fb7 |
2201 | zhit = pos[2]; |
| 2202 | eloss = 0; |
| a9e2aefa |
2203 | tlength += step ; |
| 2204 | // |
| 2205 | // nothing special happened, add up energy loss |
| 2206 | } else { |
| 2207 | eloss += destep; |
| 2208 | tlength += step ; |
| 2209 | } |
| 2210 | } |
| 2211 | |
| 2212 | |
git://git.uio.no / u / mrichter / AliRoot.git / blame